🏁🪨 Add Serious Low Weight & Clearance to Your Long-Wheelbase SCX24The INJORA Brass High Clearance Chassis 4-Link Set is designed specifically for the Axial SCX24 Jeep JT Gladiator and Dodge Power Wagon. CNC-machined from brass, this eight-piece link set adds 43g of low-mounted weight while replacing the factory Y-link configuration for improved clearance and smoother suspension movement.🏁 About the Brass High Clearance Links⚙️ 43g of Low-Mounted WeightThe heavy brass construction adds weight low in the chassis to help lower the center of gravity and improve stability when climbing and navigating technical terrain.🔧 High Clearance 4-Link DesignThe 4-link configuration replaces the factory Y-link setup and helps reduce interference with the driveshaft for smoother suspension travel. The high-clearance shape also provides additional clearance when working over obstacles.🪨 CNC-Machined Brass ConstructionPrecision-machined brass provides strength and durability while adding functional weight to the crawler. The link design also helps reduce axle wrap and unwanted axle steer.✨ Features✔ CNC-machined brass construction✔ High-clearance 4-link design✔ 43g total weight✔ Eight-piece link set✔ Adds low-mounted chassis weight✔ Helps lower the center of gravity✔ Helps improve climbing stability✔ Replaces the factory Y-link configuration✔ Helps reduce driveshaft interference✔ Helps eliminate axle wrap and unwanted axle steer📦 Includes (1) INJORA Brass High Clearance 4-Link Set (8) Links Total🔧 Compatibility Axial SCX24 Jeep JT Gladiator Axial SCX24 Dodge Power Wagon📝 Notes Total set weight is approximately 43g (1.52 oz). Compatible with the original SCX24 plastic servo mount and INJORA servo mounts. Vehicle and other components are sold separately.

Read more less

🏁🪨 Add Low Weight Where Your SCX24 Can Use It MostThe INJORA Brass Steering Knuckles are a weighted upgrade designed for the Axial SCX24. CNC-machined from solid brass, each knuckle adds 8g of unsprung weight to help lower the crawler’s center of gravity while improving stability and traction on challenging terrain.🏁 About the Brass Steering Knuckles⚙️ 8g of Weight Per KnuckleEach steering knuckle weighs 8g, adding a total of 16g of low-positioned weight to the front end. This helps lower the center of gravity and improve overall stability while crawling.🔧 CNC-Machined Solid BrassPrecision CNC-machined from solid brass, these steering knuckles provide increased strength and durability while adding functional weight exactly where it can benefit your crawler.🪨 Built for Better Crawling PerformanceThe additional unsprung weight helps improve tire contact and traction over uneven terrain while giving the SCX24 a more planted feel on climbs and technical obstacles.✨ Features✔ CNC-machined solid brass construction✔ 8g weight per steering knuckle✔ 16g total added weight per pair✔ Adds low-positioned unsprung weight✔ Helps lower the center of gravity✔ Improves traction and stability✔ Designed for improved crawling control✔ Natural brass finish📦 Includes (2) INJORA Brass Steering Knuckles🔧 Compatibility Axial SCX24📝 Notes Each steering knuckle weighs approximately 8g. Vehicle and other components are sold separately.

Read more less

Give your micro crawler aggressive all-terrain traction with the Injora 0.7" Hamrok Micro Rock Crawler Tires. Made from Injora's soft S5 compound, the Hamrok uses a deep, open tread pattern designed to bite into loose terrain while maintaining dependable grip over rocks and technical obstacles. At 39mm tall and 14mm wide, they're sized for 0.7" micro crawler wheels and make an excellent performance upgrade for the Axial SCX30 and other compatible 1/30 and 1/32 scale crawlers. ⚡ Features: Soft Injora S5 rubber compound Aggressive Hamrok tread pattern Deep, open lugs for increased traction Pronounced center lugs for strong forward bite Designed for rock, dirt, loose terrain, and technical crawling Helps improve climbing traction and control 39mm outer diameter 14mm tire width Designed for 0.7" (18mm) wheels Lightweight at approximately 3.5g per tire Includes foam inserts Four-tire package 📦 Includes: (4) Injora 0.7" Hamrok Micro Rock Crawler Tires (4) Foam Inserts 📏 Specifications: Manufacturer: InjoraPart Number: INJT7027 / T7027Tread: HamrokCompound: S5Outer Diameter: 39mm (1.53")Inner Diameter: 18mm (0.7")Width: 14mm (0.55")Weight: Approximately 3.5g (0.123 oz) eachQuantity: 4 Tires + 4 Foam Inserts 🔧 Compatibility: ✅ Axial SCX30✅ Compatible 1/30 & 1/32 micro crawlers using appropriate 0.7" wheels✅ Injora 0.7" Micro Crawler Beadlock Wheels ⚠️ Wheel Fitment Note: These tires are designed around 0.7" micro crawler wheels. As with other micro beadlock setups, bead fit can vary between wheel manufacturers, so Injora wheels are the safest pairing for proper fitment. 💡 Pro Tip: Compared with a dense pin-style tread, the Hamrok's larger, more open lugs are a strong choice when your course includes loose dirt, uneven rock, or terrain where the tire needs room to dig in and clear debris.  

Read more less

Give your micro crawler more bite with the Injora 0.7" XHX Pin Micro Rock Crawler Tires. Designed for the Axial SCX30 and other compatible micro crawlers, these 40mm tires use Injora's soft S5 compound and a dense, multi-directional XHX pin tread to deliver consistent traction across a variety of crawling surfaces. ⚡ Features: Soft Injora S5 rubber compound Dense XHX-shaped pin tread pattern Multi-directional tread for balanced forward and lateral traction 40mm outer diameter 14mm wide footprint Designed for 0.7" micro crawler wheels Lightweight at approximately 3.3g per tire Includes foam inserts Great for rock, concrete, dirt, and indoor crawling courses Designed and tested with Injora 0.7" wheels 📦 Includes: (4) Injora 0.7" XHX Pin Micro Crawler Tires (4) Foam Inserts 📏 Specifications: Manufacturer: InjoraPart Number: INJT7021 / T7021Tread: XHX PinCompound: S5Outer Diameter: 40mm (1.57")Inner Diameter: 18mm (0.7")Width: 14mm (0.55")Weight: Approximately 3.3g (0.12 oz) eachQuantity: 4 Tires + 4 Foam Inserts 🔧 Compatibility: ✅ Axial SCX30 1/30✅ Compatible 1/30 & 1/32 micro crawler applications using appropriate 0.7" wheels✅ Injora 0.7" Micro Crawler Beadlock Wheels ⚠️ Wheel Fitment Note: Injora designed and tested these tires specifically with Injora 0.7" wheels. Fitment on 0.7" wheels from other manufacturers may vary due to differences in bead dimensions and wheel design. 💡 Pro Tip: The XHX pin tread gives you lots of small biting edges across the contact patch, while the soft S5 compound helps the tire conform to technical surfaces. For an SCX30 build, pairing these with weighted 0.7" beadlocks can add both tire grip and low-mounted weight for improved crawling stability.  

Read more less

🏁🪨 Add Low Axle Weight for a More Planted CrawlerThe INJORA Brass Differential Covers are an optional upgrade for Axial SCX24 and AX24 crawlers. CNC-machined from brass and finished with a black hard coating, each cover adds 10g of weight directly to the axle, helping lower the center of gravity and improve stability on technical terrain.🏁 About the Brass Differential Covers⚙️ 20g of Total Axle WeightEach differential cover weighs approximately 10g, giving you 20g of added weight per pair. Positioning that weight directly on the axles helps keep the crawler planted while climbing and working through obstacles.🔧 Brass ConstructionThe solid brass construction adds functional weight while providing a durable replacement for the original differential covers. Chamfered edges and an etched INJORA logo give them a clean finished appearance.🪨 Front & Rear Axle FitmentThe set includes two covers suitable for the front and rear axles and is designed to work with original Axial SCX24 components.✨ Features✔ Brass construction✔ Black hard-coated finish✔ 10g weight per differential cover✔ 20g total weight per pair✔ Adds weight directly to the axles✔ Helps lower the center of gravity✔ Helps improve crawling stability✔ Chamfered edge detailing✔ Etched INJORA logo✔ Includes front and rear differential covers📦 Includes (2) INJORA Brass Differential Covers🔧 Compatibility Axial SCX24 Axial AX24📝 Notes Each differential cover weighs approximately 10g. Designed for use on the front and rear axles. Vehicle and other components are sold separately.

Read more less

🏁🪨 Add Weight, Clearance & Control to Your SCX24The INJORA Brass High Clearance Chassis 4-Link Set is an optional suspension upgrade designed for select Axial SCX24 crawlers. CNC-machined from brass, the eight-piece link set adds approximately 37g of low-mounted weight while replacing the factory Y-link setup with a 4-link design for improved clearance and smoother suspension movement.🏁 About the Brass High Clearance Links⚙️ 37g of Low-Mounted Brass WeightThe heavy brass construction adds weight down low in the chassis, helping lower the center of gravity and improve stability while navigating climbs and technical terrain.🔧 High Clearance 4-Link DesignThe 4-link configuration replaces the original SCX24 Y-link setup and is shaped to provide additional clearance around the driveshaft for smoother suspension travel and improved breakover clearance while crawling.🪨 CNC-Machined Brass ConstructionPrecision-machined brass construction provides durability while adding functional weight to the chassis. The links are also etched with the INJORA logo for a finished look.✨ Features✔ CNC-machined brass construction✔ High-clearance 4-link design✔ Approximately 37g total weight✔ Adds low-mounted chassis weight✔ Helps lower the center of gravity✔ Replaces the factory Y-link configuration✔ Helps reduce driveshaft interference✔ Designed for smoother suspension travel✔ INJORA logo detailing✔ Eight-piece link set📦 Includes (1) INJORA Brass High Clearance 4-Link Set (8) Links Total🔧 Compatibility Axial SCX24 Chevrolet C10 Axial SCX24 Jeep Wrangler JLU Axial SCX24 Ford Bronco Axial SCX24 Base Camp📝 Notes Compatible with the original SCX24 plastic servo mount and INJORA servo mount. Vehicle and other components are sold separately.

Read more less

🏁🪨 Add Weight Down Low for a More Planted SCX24The INJORA Brass Skid Plate is an optional upgrade designed for the Axial SCX24 1/24 4WD Mini Crawler platform. CNC-machined from brass and weighing 15g, it adds useful weight low in the chassis while providing a durable direct-fit replacement with no modifications required.🏁 About the Brass Skid Plate⚙️ 15g of Low-Mounted WeightAdding 15g near the bottom of the chassis helps lower the crawler’s center of gravity, reducing chassis roll and improving stability during steep climbs and technical maneuvers.🔧 CNC-Machined Brass ConstructionPrecision machined from brass for dependable strength and accurate fitment, then finished in black for a clean look that blends into the chassis.🪨 Direct-Fit SCX24 UpgradeDesigned specifically for the Axial SCX24 platform, the skid plate installs without requiring modifications while adding functional weight where a crawler can benefit from it most.✨ Features✔ CNC-machined brass construction✔ Black finish✔ Weighs 15g✔ Adds low-mounted chassis weight✔ Helps lower the center of gravity✔ Helps reduce chassis roll✔ Improves stability during steep climbs✔ Direct-fit installation with no modifications required✔ Designed for the Axial SCX24📦 Includes (1) INJORA Axial SCX24 Brass Skid Plate🔧 Compatibility Axial SCX24📝 Notes Skid plate weighs approximately 15g. Vehicle and other components are sold separately.

Read more less

Keep the essential tools for your micro crawler close at hand with the Injora 2-Piece Aluminum Screwdriver & Nut Driver Set. Compact and easy to handle, this set includes the small driver sizes needed for working on the Axial SCX30 and other micro-scale RC applications. The aluminum handles provide a comfortable, secure grip, while the precision steel driver tips are designed for reliable engagement with small RC hardware. ⚡ Features: Compact 2-piece micro RC tool set Lightweight aluminum handles Knurled/non-slip grip for improved control Precision steel driver tips Compact design for accessing small-scale RC hardware Great for assembly, maintenance, and trackside adjustments Ideal addition to a micro crawler tool kit Suitable for Axial SCX30 maintenance 📦 Includes: (1) 2mm Phillips Screwdriver (1) 3mm Nut Driver 📏 Specifications: Manufacturer: InjoraPart Number: Tool-LSD63-64Tool Count: 2Screwdriver: 2mm PhillipsNut Driver: 3mmHandle Material: AluminumTip Material: SteelApplication: Micro RC assembly and maintenance 🔧 Compatibility: ✅ Axial SCX30✅ Micro-scale RC crawlers✅ Other RC applications using compatible 2mm Phillips and 3mm nut hardware 💡 Pro Tip: Micro RC hardware is easy to strip or overtighten. Use firm downward pressure with the Phillips driver and snug the fasteners rather than cranking them down—especially when threading screws into plastic components.  

Read more less

Upgrade your micro crawler with the Injora D19 0.7" ModuWheel Beadlock Wheels. Combining CNC-machined aluminum with brass components, these wheels add useful weight down low while providing a -2mm offset for a wider, more stable stance. The modular design features replaceable wheel faces, giving you additional customization options while maintaining a functional true beadlock design. ⚡ Features: CNC-machined brass and aluminum construction True beadlock wheel design Modular design with replaceable wheel faces -2mm negative offset increases track width Helps improve stability on climbs and uneven terrain 9.4g per wheel Approximately 37.6g total wheel weight 5mm wheel hex D19 Series design Gold finish Designed for 1/30 and 1/32 micro crawlers 📦 Includes: (4) Injora 0.7" D19 ModuWheel Beadlock Wheels (1) Torx Screwdriver 📏 Specifications: Manufacturer: InjoraPart Number: INJMW7006-19 / MW7006-19Series: D19 ModuWheelMaterial: Brass & AluminumColor: GoldOuter Diameter: 19mm (0.7")Width: 10.8mmOffset: -2mmWheel Hex: 5mmWeight: 9.4g eachTotal Wheel Weight: 37.6gQuantity: 4 🔧 Compatibility: ✅ Axial SCX30 – 1/30 Scale✅ Redcat Ascent-32 – 1/32 Scale ⚠️ Tire Fitment Note: These wheels are designed and tested specifically with Injora 0.7" tires. Fitment with tires from other manufacturers may vary because of differences in bead design and manufacturing tolerances. 💡 Pro Tip: The combination of added brass weight and a -2mm offset works in two ways: it puts additional weight low on the crawler while also widening the vehicle's stance. That's especially useful for improving stability during technical climbs and side-hilling.    

Read more less

🏁🔧 Strengthen Your Ascent-18 Apex DrivetrainThe INJORA Stainless Steel Center Drive Shafts Set is a direct replacement upgrade designed for the Redcat Ascent-18 Apex. Built from durable stainless steel, these shafts reinforce the drivetrain while helping reduce slop and provide smooth, efficient power transfer across rugged terrain.🏁 About the Stainless Steel Drive Shafts⚙️ Reinforced Drivetrain PerformanceDesigned to replace the stock center drive shafts, this set provides additional drivetrain strength for demanding crawling and off-road conditions.🔧 Durable Stainless Steel ConstructionStainless steel construction provides increased durability and resistance to wear, making these shafts a solid upgrade for crawlers that regularly tackle rough terrain.🪨 Smooth & Reliable Power TransferThe precision-engineered design helps reduce drivetrain slop while providing smooth and consistent power transfer from the transmission to the axles.✨ Features✔ Durable stainless steel construction✔ Direct stock replacement upgrade✔ Strengthens the drivetrain✔ Helps reduce drivetrain slop✔ Helps minimize drivetrain wear✔ Provides smooth, efficient power transfer✔ Built for rugged off-road conditions✔ Designed specifically for the Ascent-18 Apex📦 Includes (1) INJORA Stainless Steel Center Drive Shafts Set🔧 Compatibility Redcat Ascent-18 Apex📝 Notes Direct replacement for the stock center drive shafts. Vehicle and other components are sold separately.

Read more less

🔥 Lightweight Look, Heavyweight Performance! Bring strength, stability, and style to your micro crawler with the INJORA 1.0" ModuWheel Brass & Aluminum Beadlock Wheels. These precision-machined modular wheels combine aluminum faces with brass rings for improved low-center weight, a wider stance, and head-turning looks. Available in six bold face colors, they deliver both form and function for your SCX24, FCX24, or TRX-4M build. ⚡ Features: 🛠️ CNC-machined brass & aluminum construction for precision and strength 🔄 Modular replaceable wheel faces allow quick style changes 📏 Negative offset (-4.4 mm) for wider stance and better stability 🎨 Available Colors: Black, Gray, Silver, Gold, Purple, Blue 🧲 1.0" beadlock design for secure tire mounting — no glue needed ⚖️ Brass inner rings add low-mounted weight for improved climbing balance 📏 Specifications: Part Number: MW1016 Material: Brass & Aluminum Negative Offset: -4.4 mm Outer Diameter: 28 mm Width: 15.4 mm Wheel Hub Depth: 7 mm Weight: 21 g each 📦 Includes: (4) INJORA 1.0" ModuWheel Brass & Aluminum Beadlock Wheels 🔧 Compatibility: Axial SCX24 FMS FCX24 Traxxas TRX-4M Other 1/18 & 1/24 RC crawlers using 1.0" wheels 💡 Pro Tip:Pair these wheels with INJORA T1020 Cling On Tires and INJORA Silicone Inserts #1062 for elite traction and performance on any terrain — perfect balance of style and control.  

Read more less

Upgrade your steering system with the perfect combo:the INJORA Aluminum Servo Saver (25T) paired with the INJS11 High-Voltage Coreless Servo. This setup provides a massive improvement in durability, precision, response, and overall steering authority for the Arrma Grom platform and 1/12 Losi NASCAR. The CNC-machined saver protects your servo while delivering tight, accurate steering, while the INJS11 packs high torque and fast response in a compact aluminum case. ⭐ Compatible With 1/12 Losi NASCAR 1/14 Arrma Typhon Grom 1/16 Arrma Mojave Grom 1/18 Arrma Granite Grom Arrma Gorgon Grom Arrma Quake Grom ⚠️ Important Notes ❌ Not compatible with INJS2065 servo ❌ Not compatible with Mojave Grom stock 20T servo ✔ Must be centered via your transmitter during installation ✔ This SKU includes BOTH the servo saver and the INJS11 servo Included in This Combo Set 1️⃣ INJORA Aluminum Servo Saver — GROM-11BK Features CNC machined for perfect spline fit Lightweight alloy construction Increased durability and steering precision Sleek anodized finish Weight: 3.4g Spline Size: 25T 2️⃣ INJORA INJS11 High-Torque Coreless Servo (25T) Servo Specifications Operating Voltage: 6V – 8.4V Torque: 8kg-cm @ 6V 9.5kg-cm @ 7.4V 11kg-cm @ 8.4V Speed: 0.106"/60° @ 6V 0.085"/60° @ 7.4V 0.074"/60° @ 8.4V Gear Material: Stainless steel Motor Type: Coreless Spline: 4.9mm Mini 25T Bearing: Dual ball bearing Dimensions: 32 × 12 × 27mm Weight: 21g 💥 Why Buy This Combo? Perfect servo + saver compatibility (both 25T) Huge upgrade in steering torque and accuracy More durability for off-road abuse Ideal for racers or bashers running upgraded tires/power Turn-key installation

Read more less

🔥 Wider Stance. Lower Center. Superior Control. Upgrade your Axial SCX24 with INJORA 7mm Brass Wheel Hex Hub Extenders for improved stability, precision, and handling. These high-quality brass and aluminum adapters allow you to fine-tune your crawler’s track width — increasing width up to 3mm per side — while adding low-end weight for better climbing balance. Perfect for dialing in your stance and achieving that planted, scale look on any SCX24 platform. ⚡ Features: 🛠️ Made from premium brass and aluminum alloy for strength and accuracy 🧲 Extend track width 0–3mm per side for enhanced stability 💪 Adds low-mounted weight to improve traction and climbing control 🎨 Available in Brass, Red, or Black finishes ⚙️ 7mm wheel hex design for direct fit on all SCX24 models 🔩 Includes multiple thickness options for precise tuning 📏 Specifications: Material: Brass / Aluminum Alloy Color Options: Brass, Red, Black Thickness Options: 3mm, 4mm, 5mm, 6mm Hex Width: 7mm Compatibility: Axial SCX24 Series (AXI90081, AXI00002, AXI00001, AXI00004) 📦 Includes: (1) Set of SCX24 Wheel Hex Hub Extenders (choose thickness/color) 💡 Pro Tip:For a balanced setup, match these extenders with INJORA Brass Diff Covers and Big Bore Shocks — giving your rig both the stance and stability it deserves.

Read more less

⚙️ Built Tough. Tuned Precise. Ready for Anything. Upgrade your TRX4M drivetrain with INJORA Black Hardened Steel Drive Shafts, precision-machined for strength, accuracy, and a tight, vibration-free fit. Designed specifically for the 1/18 TRX4M Defender and Bronco, these shafts feature D-shaped and rounded rectangle holes for a more secure connection, plus correct in-phase design for smooth power delivery. ⚡ Features: 🔩 CNC-machined hardened steel for maximum durability and torque resistance 🧩 In-phase design ensures smooth and balanced power transfer 🔒 D-shaped and rounded rectangle holes create a tighter, more reliable connection 🪶 Enhanced structure for extended lifespan and superior drivetrain stability 🖤 Black-coated finish with etched INJORA logo for premium style and protection 🧠 True-to-scale joint and spline design maintains a realistic crawler appearance 📏 Specifications: Part Number: 4M-50BK Material: Hardened Steel Color: Black Weight: 22 g (0.78 oz) 📦 Includes: (2) Hardened Steel Drive Shafts (4) Mounting Screws 🔧 Compatibility: 1/18 Traxxas TRX4M Defender 1/18 Traxxas TRX4M Bronco 💡 Pro Tip:Pair these with INJORA stainless or brass link kits to maximize driveline durability and reduce flex when tackling extreme terrain.

Read more less

🏁 Smooth Suspension Control in a True Micro Package These INJORA 26mm aluminum shocks are designed specifically for the 1/30 Axial SCX30, offering smoother action, tunability, and a big performance upgrade over the stock units. With threaded bodies and dual spring options, they’re easy to dial in for your terrain and driving style. Important Notes ⚠️ Shock oil is not included⚠️ Shocks can be run with or without oil⚠️ Due to the compact size, adding oil may require a filling tool Compatibility ✔ Axial SCX30 (1/30 scale) Key Features • CNC-machined aluminum shock bodies for strength and precision• Threaded bodies for quick preload and ride-height adjustment• Two spring rates included (soft & hard) for tuning• Nylon bottom rod ends add flexibility and reduce binding• Smooth action with consistent damping performance Specifications Part Number: SCX30-08BSShock Length (Eye-to-Eye): 26mmShock Body Material: AluminumBottom Rod End Material: NylonWeight (Each): 1gQuantity: 4 shocks Package Includes (4) 26mm Aluminum Shocks(4) Extra Springs Pro Tip 💡 Many SCX30 drivers run these dry for ultra-free movement, then add a light oil later if they want more control on steep descents.  

Read more less

💪 Lower Center of Gravity. Higher Clearance. Maximum Control. Upgrade your TRX4M’s suspension geometry and stability with the INJORA Brass High Clearance Links Set, CNC-machined for precision and strength. Available in raw brass or black-coated brass, these links not only enhance performance but also add a sleek, premium look to your crawler. ⚡ Features: 🧱 CNC-machined brass construction for strength and durability 🧗 High-clearance bent links improve obstacle approach angles and articulation ⚖️ Heavy 42 g brass weight lowers the center of gravity for improved climbing stability 🖤 Optional black hard-coat finish with chamfered edges — corrosion-resistant and stylish 🔧 Direct bolt-on fit — replaces stock plastic links with zero modification 📏 Specifications: Part Number: 4M-40 Material: Brass (Raw or Black-Coated) Quantity: 8 PCS Weight: 42 g (1.48 oz) 📦 Includes: (1) Complete Brass High Clearance Links Set 🔧 Compatibility: 1/18 Traxxas TRX4M Defender 1/18 Traxxas TRX4M Bronco 💡 Pro Tip:Pair these with INJORA brass wheel weights or stainless driveshafts to create a low-centered, ultra-stable crawler that hugs every line.  

Read more less

Upgrade your micro crawler’s suspension with the Injora SCX30 22.5mm Pre-Assembled Aluminum Shock Set (SCX30-07BS). Designed for the Axial SCX30 1/30 scale 4WD mini crawler, these shocks provide smoother suspension performance and more tuning options compared to stock friction shocks. Each shock features a CNC-machined aluminum body for durability and precision, along with threaded bodies for quick preload adjustments. The nylon bottom rod ends add flexibility for improved articulation when crawling over uneven terrain. With both soft and hard springs included, you can easily dial in the suspension to match your driving style or terrain. For builders who want even smoother damping, these shocks can also be filled with shock oil for additional tuning. Features• CNC-machined aluminum shock bodies for durability and precision• Threaded bodies allow quick preload adjustments• Nylon bottom rod ends improve articulation and flexibility• Includes soft and hard spring rates for suspension tuning• Pre-assembled design for quick installation• Perfect upgrade for SCX30 mini crawler builds Specifications• Overall Length: 1.06 in (26.8mm)• Extended Length (Eye-to-Eye): 0.89 in (22.5mm)• Weight (Each): 0.03 oz (0.9g) Includes• (4) 22.5mm Pre-Assembled Aluminum Shocks• (4) Additional Springs  

Read more less

 ⚙️ Weight. Stability. Fully Tunable Performance. Upgrade your micro crawler with the INJORA ModuWheel Beadlocks—engineered for maximum stability, low center of gravity, and customizable performance. Combining CNC aluminum construction with brass weight rings, these wheels add serious unsprung weight where it matters most for improved traction and control on technical terrain. ⚡ Features: 🛞 CNC-machined aluminum construction for precision and durability⚖️ Brass ring design adds low-end weight for improved traction and stability🧭 -4.05mm negative offset widens stance for better balance and side-hill control🔧 Modular design with replaceable wheel faces for customization💪 40.5g per wheel (162g total) for enhanced crawler performance🎨 Blue finish for a clean, custom look 📏 Specifications: Part Number: YQW-MW1316BLMaterial: Aluminum + BrassDiameter: 33.5mm (1.32in)Width: 16.5mm (0.65in)Weight: 40.5g (1.43oz) eachOffset: -4.05mmHex Size: 7mm 📦 Includes: (4) ModuWheel Brass & Aluminum Beadlock Wheels 🔧 Compatibility: Fits 1.3" tires for most 1/18 and 1/24 scale micro crawlers (SCX24, TRX-4M, AX24, Ascent 18, and similar platforms) 💡 Pro Tip: Pair with 70mm tires and soft inserts to maximize traction—these weighted wheels dramatically improve climbing performance and side-hill stability.

Read more less

🔩 Hardened Steel Drivetrain Upgrade for SCX24 Upgrade the durability of your SCX24 drivetrain with the INJORA Steel Front and Rear Center Drive Shafts. CNC-machined from hardened steel and finished in black, these shafts are built to handle increased torque from upgraded motors and heavier builds while maintaining smooth power delivery. ⚡ Features: 🛠️ CNC-machined steel construction with black finish🏁 Etched INJORA logo for clean scale detail💪 Designed to improve strength and reliability over stock shafts 📏 Specifications: Material: Hardened Steel / Stainless SteelQuantity: 2 pcsOverall Length:• Front (Short): 40–52mm• Rear (Long): 52–72mmWeight: 17g (0.60oz) 📦 Package Includes: (1) Short Front Center Drive Shaft(1) Long Rear Center Drive Shaft(4) Mounting Screws 🔧 Compatibility: Axial SCX24 Chevrolet C10Axial SCX24 Jeep Wrangler JLUAxial SCX24 Ford BroncoAxial SCX24 Base Camp 💡 Pro Tip:Steel center shafts are a smart upgrade when running heavier wheels, brass parts, or brushless power to prevent drivetrain twist and wear.

Read more less

🎒 Scale Roof Rack Accessory for Micro Crawlers Add realistic cargo-carrying detail to your 1/24 or 1/18 crawler with the INJORA Mini Elastic Luggage Net. Perfect for Axial SCX24, Jeep C10, JLU Gladiator, Bronco, and other scale rigs, this stretchy net lets you secure scale accessories and enhance your build’s realism. ⚡ Features: 🧵 Elastic design stretches to fit various load sizes🔗 Includes hooks for easy attachment to roof racks🏁 Durable construction for long-lasting micro-scale detail🎨 Multiple colors available: Black, Red, Yellow, Olive Green, Orange 📏 Specifications: Scale: 1/24Size: 75 × 60mm (2.95 × 2.36in) 📦 Package Includes: (1) RC Car Luggage Net 🔧 Compatibility: Fits 1/24 & 1/18 RC CrawlersWorks with Axial SCX24, Jeep C10, JLU Gladiator, Bronco, and similar micro rigs 💡 Pro Tip:Perfect for carrying tiny scale gear like jerry cans, tool boxes, or spare tires—just stretch, hook, and your roof rack is ready for adventure!  

Read more less

🛞 Maximum Bite for Micro-Scale Crawling Built specifically for the SCX30 platform, these INJORA 0.7" Swamp Claw tires deliver aggressive traction in a true micro footprint. The open tread and claw-style sidewalls shine on loose dirt, wet rock, and technical climbs where grip really matters. Important Fitment Note ⚠️ Designed and tested exclusively with INJORA 0.7" wheels.Fitment with other brand wheels is not guaranteed due to design and tolerance differences. Compatibility ✔ Axial SCX30 (1/30 scale)✔ INJORA 0.7" wheels Key Features • Molded in INJORA S5 Super Soft & Sticky compound• Aggressive open tread for strong bite in mud and loose terrain• Pronounced center lugs for consistent forward traction• Claw-style sidewall lugs improve grip when side-hilling• Optimized size for true 1/30 scale performance Specifications Part Number: T7019Tire Compound: INJORA S5Outer Diameter: 36mmWidth: 14mmWeight (Each): 2.8g Package Includes (4) INJORA 0.7" Swamp Claw Tires Pro Tip 💡 Pair these with brass 0.7" wheels to keep the center of gravity low and really let the S5 compound do its thing on steep or slippery lines.    

Read more less

🧱 Strength, Precision, and Scale Looks in One Upgrade Ditch the stock plastic and step up to INJORA aluminum axle housings for your 1/30 SCX30. These CNC-machined housings add durability, improve axle rigidity, and give your rig a clean, scale finish—without changing fitment or geometry. Important Install Note ⚠️ Use ONLY the screws included by INJORA.Stock SCX30 screws are not compatible and will not fit correctly. Compatibility ✔ Axial SCX30 (1/30 scale)✔ Direct replacement — no modifications required Key Features • CNC-machined aluminum alloy for precise fit and durability• Black anodized finish resists corrosion and wear• Stronger and more rigid than stock plastic housings• Includes matching aluminum diff covers for a complete upgrade• Maintains stock axle geometry and driveline alignment Specifications Part Number: SCX30-10BKMaterial: AluminumFront Axle Weight: 4.7gRear Axle Weight: 4.9g Package Includes (1) Front Axle Housing(1) Rear Axle Housing(2) Diff Covers Pro Tip 💡 Aluminum axle housings pair especially well with brass steering or portal upgrades, helping keep the axle true under load and improving consistency on technical climbs.  

Read more less

⚙️ Precision Steering Upgrade with Added Front-End Weight These INJORA brass steering links are a direct replacement upgrade for the 1/30 Axial SCX30, adding durability and a touch of front-end weight where it actually helps. The black-coated brass finish keeps things looking clean while improving stability on climbs. Compatibility ✔ Axial SCX30 (1/30 scale) No modifications required — true drop-in fit. Key Benefits • CNC-machined brass for strength, accuracy, and corrosion resistance• Adds weight to the front axle for improved climbing stability• Helps keep the front planted for better steering control• Direct replacement for stock steering links• Black-coated finish for a subtle, premium look Specifications Part Number: SCX30-05BKMaterial: BrassFinish: Black CoatedTotal Weight: 2.8g What’s Included (2) Brass Steering Links(1) Torx Screwdriver Pro Tip 🧠 Small weight changes matter on 1/30 scale rigs — adding brass up front can noticeably improve tire bite and control on steep or technical climbs without overloading the chassis.

Read more less

🏁 Low Center of Gravity Upgrade for 1/18 TRX4M Crawlers Upgrade your 1/18 TRX4M with the INJORA Universal LCG Carbon Fiber Chassis Kit. Designed to lower your truck’s center of gravity, this chassis improves climbing performance, adds rigidity, and offers multiple shock mounting points for suspension tuning. Perfect for scale builds and high-performance crawling. ⚠️ Compatibility Note:Works with lay down servos and stock servos. Compatible with all 1/18 TRX4M stock bodies including: Defender, Bronco, High Trail K10, F150, as well as INJORA TRX4M IR40 and IR60 bodies. ⚡ Features: 🛠️ 100% pure carbon fiber construction for lightweight strength📏 Thickened 2mm rails for enhanced frame rigidity🔩 Multiple shock mounting points for fine suspension tuning🏔️ Low Center of Gravity (LCG) design for superior climbing ability🔧 Allows layout customization for stronger, more stable crawls 📏 Specifications: Part Number: 4M-89Material: Carbon FiberRails Thickness: 2mmWeight: 53gSize: 220 × 43mm 🛠️ Required Tools: • 0.05" hex screwdriver (1.27mm or 1.3mm also works)• 1.5mm hex screwdriver• Cross wrench 📦 Package Includes: (1) INJORA Universal LCG Carbon Fiber Chassis Kit 💡 Pro Tip:Combine this chassis with low-profile wheels and soft silicone inserts to maximize climbing performance while keeping your center of gravity as low as possible.

Read more less

Transform your TRX4M into a custom half-truck crawler with the INJORA IR40 Hard Body Kit. Featuring a detailed ABS construction, back-half cage, clipless front mount, and integrated LED lighting, this upgrade delivers both scale realism and trail performance. Designed specifically for the TRX4M Defender & Bronco wheelbase (155mm), this body offers a perfect fit with stock rails or the INJORA Universal TRX4M chassis. Choose from multiple color options — or pick the unpainted white version to create your own custom scheme. Note: Fits TRX4M Defender & Bronco (155mm wheelbase) Fits INJORA Universal TRX4M chassis Compatible with INJORA 1.3" wheels & 70mm tires Not compatible with TRX4M High Trail K10/F150 unless the rails are shortened ⭐ Features Detailed ABS hard-plastics half-truck body Back-half cage design for scale appearance Front clipless mounting + rear hook-and-loop hinge for fast access Simple “4-screw” installation method Includes front bumper + front white LED and rear red LED lighting Perfect for custom builds and low-CG crawler setups Comes unassembled for full customization 🎨 Available Colors Grey Green Blue White (Unpainted — ready for custom paint) 📐 Specifications Part Number: IR40 Material: ABS Plastic Weight: 87g (3.07oz) Wheelbase: 155mm (6.10") Body Size: 210 × 82 × 75mm (8.27" × 3.23" × approx. 3") 📦 Includes (1) IR40 Half-Truck Hard Body Kit (1) Front Bumper (1) Front & Rear LED Light Set (1) Body Assembly Manual  

Read more less

Take full control of your scale recovery setup with the INJORA Wireless Remote Receiver Winch Controller Set, designed for most 1/10 RC crawlers. This system gives you easy, wireless operation of your winch—perfect for Traxxas TRX-4, Axial SCX10, RC4WD builds, D90s, Tamiya CC01 rigs, and more. Just power the receiver, bind with the remote, and you're ready to control your winch without needing extra channels on your radio. Compact, easy to install, and incredibly convenient for trail trucks and scale rigs. Note: Winch and receiver shown in some photos are not included. ⭐ Features Compatible with most 1/10 scale RC winches Wireless remote for simple, fast winch control Plug-and-play receiver — easy installation Bind by holding the reset button until the red LED flashes Stable power range: 4.8V–12V Compact size fits easily into scale crawlers Ideal for TRX-4, SCX10, D90, CC01, and similar rigs 📐 Specifications Item: Wireless Winch Controller Quantity: 1 pcs Receiver Size: 41.5 × 31 × 10mm Controller Battery: 3V CR2032 (not included) Power Supply: 4.8–12V (from your receiver) Connection: As shown in wiring diagram/photos 📦 Includes (1) INJORA Wireless RC Winch Controller  

Read more less

⚙️ Fine-Tune Your Crawl Ratio for Maximum Control! Unlock next-level crawling precision with the INJORA Overdrive & Underdrive Gears — the ultimate upgrade for Axial SCX24 and AX24 owners. Designed from hardened steel for unmatched durability, these gear sets let you fine-tune your drivetrain for better climbing, improved cornering, and reduced rollovers. Choose your setup: Overdrive the front for more aggressive climbs and tighter turns, or Underdrive the rear for smoother control and slower descent. ⚡ Features: 🔩 Hardened steel construction for long-lasting performance 🔄 Front or rear compatible — works in both axles ⚙️ Fine-tune crawl behavior: 2/12T Overdrive → +33% speed 2/13T Overdrive → +23% speed 2/14T Overdrive → +14% speed 2/16T → Neutral (no speed change) 1/12T Underdrive → –33% speed 2/18T Underdrive → –11% speed 🧲 Improves climbing and steering precision 🚙 Reduces rollover and enhances traction 📏 Specifications: Part Number: SCX24-77 Material: Hardened Steel Weight: 4g (0.14oz) Compatibility: Axial SCX24 (all series) & AX24 📦 Includes: (1) INJORA Overdrive or Underdrive Gear Set (choose ratio) 💡 Pro Tip:Pair with INJORA Brass Diff Covers and Big Bore Shocks to optimize both your weight distribution and low-speed crawl precision — the perfect combo for serious scale performance.  

Read more less

Upgrade your micro crawler’s performance with Injora 1.0" Silicone Rubber Tire Inserts. Designed for 56–58mm micro crawler tires, these waterproof silicone inserts provide superior sidewall support, consistent tire shape, and improved traction compared with traditional foam inserts. Choose between Soft Green for a balanced combination of support and tire flex or Super Soft Yellow for maximum tire conformity and grip on technical terrain. ⚡ Features: 🛞 Designed for 1.0" micro crawler tires📏 Fits approximately 56–58mm tires💧 Fully waterproof silicone rubber construction🌡️ Temperature resistant for consistent performance💪 Provides increased sidewall support compared with traditional foam🪨 Helps tires conform to rocks and technical terrain⚖️ Approximately 11g per insert adds useful low-mounted weight🎯 Improves traction, stability, and tire control🔧 Available in two compounds for setup tuning 🎨 Compound Options: 🟢 Soft Green – DGT-1056GNBalanced tire flex and sidewall support. Great all-around option for trail crawling, mixed terrain, and setups where additional tire stability is desired. 🟡 Super Soft Yellow – DGT-1056YLSofter compound designed for increased tire conformity and maximum grip. Excellent for technical rock crawling and setups where maximum tire flex is preferred. 📦 Includes: (4) Injora 1.0" Silicone Rubber Tire Inserts Select your desired compound before ordering. 📏 Specifications: Wheel Size: 1.0"Recommended Tire Size: 56–58mmMaterial: Silicone RubberWeight: Approximately 11g EachQuantity: 4 Inserts Available Part Numbers:DGT-1056GN – Soft GreenDGT-1056YL – Super Soft Yellow 💡 Pro Tip: Different compounds can also be used front-to-rear to fine-tune your crawler. Run Soft Green where you want additional tire support and Super Soft Yellow where you want increased tire flex and conformity.

Read more less

Upgrade your micro crawler steering with the Injora N30 Nano High Torque Servo, designed specifically as a drop-in steering upgrade for the Axial SCX30. Featuring an aluminum case and metal gear drivetrain, this servo delivers stronger steering performance while adding beneficial weight to the front of the vehicle. Built for durability and precise control, it’s a major improvement over the stock servo for demanding crawling conditions. 🧗 High Torque Crawling Performance Producing 20.83 oz-in of torque at 6V, the N30 Nano provides powerful steering authority for technical terrain and obstacles. The added front-end weight from the aluminum case improves balance and traction on lightweight SCX30 rigs, helping keep the tires planted during climbs and side-hill sections. 🏗 Durable Metal Construction The servo features a machined aluminum case and all-metal gears, improving durability and longevity compared to stock plastic servos. This rugged design ensures consistent steering performance even under heavy load. ⚡ Features Direct drop-in fit for Axial SCX30 20.83 oz-in torque at 6V All-metal gear construction Machined aluminum servo case Added low front-end weight for improved traction Pulse width modulation control for precise steering Includes aluminum servo saver 📦 Includes (1) N30 Nano Micro Servo (1) Aluminum Servo Saver 📊 Specifications Application: SCX30 Input Voltage: 5–6V Speed @ 6V: 0.050 sec / 60° Torque @ 6V: 20.83 oz-in (1.5 kg-cm) Motor Type: Coreless Brushed Gear Material: Metal Dimensions: 21.45 × 15.2 × 12.85 mm Weight: 7g If you're looking to improve steering strength, durability, and front-end traction, the Injora N30 Nano servo is one of the best upgrades available for the SCX30 platform.

Read more less

Upgrade durability without adding unnecessary weight with the Injora Aluminum Skid Plate for the Axial SCX30 (SCX30-06BK). Designed as a direct-fit upgrade for the SCX30 1/30 scale mini crawler, this skid plate installs easily with no modifications required. CNC-machined from aluminum alloy, this skid plate provides a precise, rigid fit that helps protect the drivetrain and chassis underside from trail impacts. At only 5.6 grams, it maintains the nimble handling characteristics of the SCX30 crawler while offering improved durability compared to stock components. The black anodized finish adds corrosion resistance and gives your crawler a clean, scale-inspired look that complements any build. Features• CNC-machined aluminum alloy construction for strength and precision• Direct-fit upgrade for the Axial SCX30 platform• Lightweight 5.6g design maintains crawler agility• Anodized black finish for corrosion resistance• Protects drivetrain and chassis underside• Clean, scale-style appearance Includes• (1) Injora Axial SCX30 Aluminum Skid Plate    

Read more less

🔩 Scale-Correct Hardware with a Clean, Compact Fit These INJORA custom M2 wheel nuts are purpose-built for the 1/30 Axial SCX30, offering a smaller, more scale-accurate profile than standard M2 nuts. Precision-machined from stainless steel, they deliver consistent fit, long-term durability, and a subtle visual upgrade you’ll notice up close. Important Note ⚠️ For easiest installation and removal, use your own 2.0mm hex driver with the included nut tool. Compatibility ✔ Axial SCX30 (1/30 scale) Key Features • Custom-designed specifically for SCX30 wheel hubs• Smaller than standard M2 wheel nuts for improved scale realism• Compact 3.0mm outer diameter for a cleaner look• CNC-machined stainless steel for precise, consistent fit• Corrosion-resistant for long-term use Specifications Part Number: SCX30-12Material: Stainless SteelThread Size: M2Nut Width: 3.0mm Package Includes (8) M2 Stainless Steel Wheel Nuts(1) Wheel Nut Tool Pro Tip 💡 These pair perfectly with brass or beadlock wheels—the smaller nut size keeps the hub looking realistic without sacrificing strength.  

Read more less

🪢 Scale Rescue & Towing Strap for Micro Crawlers Be prepared for any trail recovery with the INJORA 270mm Elastic Strap Rescue Rope. Designed for 1/18 and 1/24 scale RC crawlers, this durable elastic rope with metal hooks lets you tow, rescue, or secure your truck with ease. ⚠️ Note:Slight size variation may occur due to handmade construction. Thanks for your understanding. ⚡ Features: 🧵 Elastic 2-in-1 rope design for stronger tension🔗 Includes metal hooks for easy attachment to your truck🏁 Versatile use: body fixing, towing, or scale recovery 📏 Specifications: Color Options: Black, Red, Orange, Blue, GreenLength: Approx. 270mm (10.63in)Weight: 6g (0.21oz) 📦 Package Includes: (1) RC Car Rescue Rope 🔧 Compatibility: 1/24 & 1/18 Scale RC CrawlersWorks with: TRX-4M, SCX24, FCX24, and similar platforms 💡 Pro Tip:Perfect for scale recovery setups—use multiple straps for towing heavier builds or linking trailers for your mini crawler adventures.

Read more less

Add eye-catching scale lighting and custom glow effects to your RC build with the INJORA Flexible Cuttable LED Strip Lights.These ultra-thin, bendable LED strips are designed specifically for RC bodies, allowing you to wrap contours, outline body lines, or create dramatic illumination on 1/10, 1/18, 1/24, and other custom projects. Choose from six vibrant colors and cut the strip to your desired length for a perfect fit on any body shell. Note: For lighting modes such as steady, breathing, and strobe, an additional light controller is required.Do NOT pull or stretch the strip during installation. ⭐ Features Available in six colors: Warm White, Red, Ice Blue, Pinkish Purple, Green, Dark Blue Ultra-flexible design wraps easily around curved surfaces Cuttable strip lets you customize the exact length you need Bright illumination for night crawling, racing, or scale realism Easy installation with included cable ties (glue can be used if preferred) Perfect for RC crawlers, bashers, drifters, and custom scale builds 📐 LED Strip Specifications Part Number: L42 Operating Voltage: 5–7.4V Total Wire Length: 550mm LED Strip Length: 290mm LED Strip Width: 2mm Available Colors: Warm White Red Ice Blue Pinkish Purple Green Dark Blue Weight: 6g 🔌 Optional Light Controller (Sold Separately) Lighting Modes: Steady • Breathing • Strobe Control Methods: Manual button CH3 on transmitter Length: ~175mm (6.89") Weight: 3.2g 📦 Includes (1) Flexible LED Strip Light Cable ties for wire management  

Read more less

🧭 Lightweight Strength. Maximum Clearance. Premium Precision. Upgrade your TRX4M Defender or Bronco with the INJORA CNC Aluminum High Clearance Links Set — engineered to deliver smoother articulation, higher trail clearance, and long-lasting durability. These links are a direct-fit replacement for stock plastic components and feature a sleek black anodized finish for a professional look. ⚡ Features: 💪 CNC-machined aluminum construction for superior strength and precision 🧱 High-clearance bent links to improve approach angles and reduce hang-ups 🔩 Etched INJORA logo for a clean, factory-upgrade appearance ⚙️ Includes brass pivot balls and rubber O-rings for smooth suspension movement 🏁 Direct replacement for stock plastic links — no modification required 📏 Specifications: Part Number: 4M-37 Material: Aluminum links, brass pivot balls, rubber O-rings Color: Black anodized Quantity: 8 pieces Weight: 19g (0.67oz) 📦 Includes: (1) Set of INJORA Aluminum High Clearance Links 🔧 Compatibility: 1/18 TRX4M Defender 1/18 TRX4M Bronco 💡 Pro Tip:Pair with INJORA Brass Diff Covers or Brass Wheel Hexes to lower your center of gravity and fine-tune your weight balance — perfect for conquering rocky trails and steep climbs.

Read more less

 ⚡ More Torque. More Speed. Drop-In SCX30 Upgrade. Give your Axial SCX30 a performance boost with the Injora 030-Size 65T Brushed Motor. Designed as a direct-fit upgrade over the stock 88T motor, the 65T design delivers stronger torque, quicker throttle response, and increased top speed while retaining the smooth control needed for technical crawling. With a pre-installed PH2.0 connector and included 11T 0.3Mod stainless steel pinion, this motor is ready for a straightforward installation without complicated modifications. ⚡ Features: 🚙 Designed specifically for the Axial SCX30💪 High-torque 65T brushed motor🚀 Faster performance than the stock SCX30 88T motor🎯 Improved throttle response and overall top speed🪨 Maintains smooth, crawler-friendly low-speed control🔧 OEM-style fitment for easy drop-in installation⚙️ Includes 11T 0.3Mod stainless steel pinion gear🔌 Pre-wired with PH2.0 connector🔋 Designed for 2S LiPo power 📦 Includes: (1) Injora 030-Size 65T Brushed Motor (1) 11T 0.3Mod Stainless Steel Pinion 📏 Specifications: Part Number: INM22Application: 1/30 Scale Rock CrawlerMotor Size: 030Motor Type: BrushedTurns: 65TInput Voltage: 2S LiPo (7.4V)Connector: PH2.0Pinion: 11T / 0.3ModWeight: 0.41oz (11.8g) 🔧 Compatibility: ✅ Axial SCX30 💡 Pro Tip: Moving from the stock 88T motor to the Injora 65T is a great option for SCX30 owners looking for a little more wheel speed and punch without giving up crawler-friendly control. With the connector and pinion already installed, it's also an easy upgrade for getting more performance without a complicated electronics conversion.

Read more less

Transform your Axial SCX30 with the Injora MBL32-NANO Brushless ESC and Green Viper 1621 Motor Combo. This compact brushless system delivers whisper-quiet operation, ultra-smooth throttle control, and powerful climbing performance designed specifically for micro crawling. With refined low-speed control and strong torque when needed, this combo gives your SCX30 the precision and power to conquer technical terrain. 🧗 Purpose-Built Brushless Power Designed specifically for the Axial SCX30, this combo combines a compact waterproof ESC with the high-torque Green Viper 1621 outrunner motor. The system provides extremely smooth throttle response and quiet operation, giving you greater control while navigating rocks, roots, and steep climbs. ⚡ Compact ESC with Advanced Control The MBL32-NANO ESC features a tiny footprint while delivering strong performance: 25A continuous / 45A burst current Adjustable 6V or 7.4V BEC Waterproof design for all-weather crawling PC programmability via USB This small but powerful ESC keeps your crawler responsive while maintaining clean wiring and minimal weight. 🏁 High-Torque Green Viper Motor The included 1621 Green Viper brushless outrunner motor features a 12-pole design that produces smooth low-speed rotation and strong torque for technical crawling situations. It provides: Smooth low RPM control Powerful climbing torque Quiet operation compared to brushed motors ⚡ Features Designed specifically for the Axial SCX30 micro crawler Whisper-quiet brushless operation Ultra-smooth and linear low-speed throttle response Strong power for climbs and acceleration Compact lightweight ESC design Waterproof ESC for all-weather performance High-torque 12-pole 3600kV outrunner motor Adjustable 6V / 7.4V BEC with 3A output Reinforced motor wiring with protective sleeve 📦 Includes (1) MBL32-NANO Brushless ESC (1) Green Viper 1621 Brushless Outrunner Motor 📊 ESC Specifications Application: 1/30 Rock Crawler Motor Type: Brushless Sensorless Input Voltage: 2–3S LiPo Continuous Current: 25A Burst Current: 45A BEC Voltage: 5.5V / 7.4V BEC Current: 3A Battery Connector: PH2 Programming: PC via USB 📊 Motor Specifications Motor Type: Brushless Sensorless kV Rating: 3600kV Poles: 12 Slots: 9 Input Voltage: 2S LiPo recommended Output Shaft: 1.7mm Dimensions: 15.5 × 21.5mm Weight: 14.9g ⚠️ Note: Due to the motor’s kV rating, this system should be used with 2S LiPo batteries only.A standalone receiver is required to complete installation. For SCX30 owners looking for quiet operation, smooth control, and serious crawling power, the Injora Green Viper brushless combo is a massive performance upgrade.

Read more less