Traxxas Titan 550 Size Motor (12T) – Part #3785🔥 Big Power. Bold Performance. The Traxxas Titan 12T 550 Brushed Motor delivers massive torque and reliable performance for your RC adventures. Whether you're tearing up trails or bashing in the backyard, this motor is built to handle the heat—literally—with an integrated cooling fan that helps extend run times and reduce wear. A perfect drop-in replacement for Traxxas models using a 12-turn brushed motor. ✅ High-torque 550 size brushed motor✅ 12-turn design for powerful acceleration✅ Built-in cooling fan for longer run times✅ Factory-installed leads for easy installation✅ Ideal replacement for many Traxxas 1/10 scale vehicles 📦 Includes: (1) Titan 550 12T Brushed Motor 💡 Pro Tip: For best results, pair with the Traxxas XL-5 ESC and a properly geared transmission to balance speed and runtime.  

Read more less

Unleash extreme torque with the Titan 550 Reverse Rotation Motor from Traxxas — the ultimate upgrade for your TRX-4. This 21-turn powerhouse features a 30% longer armature than standard 540 motors, delivering monster torque and rugged trail performance. Built with an integrated fan for cooler running and longer motor life, this motor is ready to crawl, climb, and conquer. 🔥 21-turn / 14.4V Reverse Rotation🔥 550-size can for maximum torque🔥 30% longer armature = more power🔥 Integrated cooling fan for extended durability Compatible with: Traxxas TRX-4 Traxxas models requiring reverse rotation 550 motors Part #: 3975R Built to handle the toughest trails — torque, traction, and temperature under control. This is Titan power.  

Read more less

  Power. Precision. Performance. Upgrade your ESC with the Hobbywing Module-X Non-Polarity Capacitor Module — engineered to deliver faster throttle response, smoother acceleration, and reduced electrical noise for ultimate racing consistency. Perfect for 1/10-scale Modified or Stock setups, this high-efficiency capacitor pack enhances performance without adding unnecessary weight or bulk. Race-Grade EfficiencyThe Module-X features low impedance and high ripple current endurance, allowing it to absorb voltage spikes and minimize interference caused by rapid ESC switching. The result: improved startup acceleration, lower heat generation, and longer ESC lifespan. Compact and lightweight, it mounts easily on your chassis for a clean, professional installation. ⚡ Features: Greatly improves startup acceleration and throttle response Reduces interference from ESC power switching Low impedance design for higher efficiency Minimal heat generation under load Small, lightweight, and easy to install Designed for 1/10-scale racing applications 📏 Specifications: Size: Standard (1/10-scale) 📦 Includes: (1) Hobbywing Module-X Modified/Stock Non-Polarity Capacitor Module  

Read more less

🏆 Unmatched Control for Stock Class DominanceOptimized for 21.5T Stock Class Racing, this lightweight ESC/Motor combo delivers precise control, ultra-smooth throttle response, and cooler temps under pressure. Whether you're racing touring cars, F1, or drift machines, this combo gives you the edge every lap. 🧠 ESC – XR10 Stock Spec G2 Highlights: 100A continuous / 500A peak power output Compact, low-profile footprint with 14.3% lower CG Dual firmware modes: Blinky (stock) & Boost (mod) Built-in 6–7.4V BEC @ 5A Adjustable throttle/brake curves & drag brake frequency ROAR Approved Real-time data logging (temp, RPM, etc. with optional OTA or LCD box) ⚙️ Motor – V10 G4R 21.5T Highlights: 21.5 Turn / 2500kV Fully exposed stator for maximum cooling High-precision end bell improves structural integrity Dual sensor ports for easy wiring Lower internal resistance for cooler temps and higher efficiency 📦 Includes: (1) Xerun XR10 Stock Spec G2 ESC (1) Xerun V10 G4R 21.5T Sensored Motor ✅ Ideal for:1/10 Touring • F1 • Stock Class Buggies • Drift 💡 Tech Tip: Add the Hobbywing OTA Module (sold separately) for wireless tuning, firmware updates, and real-time performance tracking through the HW Link app!

Read more less

1RC Racing 1/18 Brushless Motor (10000Kv) w/10T Pinion – 1RC7011Looking for more speed? The 1RC 10000Kv Brushless Motor is the perfect upgrade for your 1/18 scale racer. With serious RPM and a pre-installed 10T pinion, this motor delivers the punch you need to dominate on the track. ✔️ 10000Kv for high-performance speed✔️ Pre-pressed 10T pinion for easy install✔️ Compatible with 1RC 1/18 scale platforms✔️ Perfect upgrade for racers chasing top-end power Includes:• (1) Brushless Motor (10000Kv)• (1) 10T Pinion (installed) 💥 Turn up the heat and leave the rest behind!    

Read more less

Furitek UNITY24 PRO 2-in-1 FOC Brushless System (3500kV)💥 Power + Precision for Your SCX24 💥 The Furitek UNITY24 PRO is a game-changing upgrade for 1/24 and 1/18 scale crawlers like the Axial® SCX24. This all-in-one brushless motor and ESC combo features FOC (Field-Oriented Control) technology for ultra-smooth control, powerful torque, and precision crawling. With built-in wireless programming, a waterproof CNC aluminum case, and smart BEC features, the UNITY24 PRO sets a new standard in micro crawler performance. ✅ Perfect fit for Axial® SCX24 and other micro crawlers✅ CNC-machined waterproof aluminum housing✅ Built-in wireless for easy app-based tuning (Android & iOS)✅ Smooth startup & throttle transitions with FOC tech✅ Adjustable BEC output (5.5V–8.4V)✅ Lifetime firmware updates 📦 Includes: (1) UNITY24 PRO 2-in-1 Motor/ESC System (1) CNC Aluminum Motor Mount (1) Furitek Repeater Wireless Module (1) 11T Pinion Gear 🔧 Specs: Motor: 3500kV Inrunner (12-pole) ESC Current: 30A continuous / 50A peak Voltage: 2S–3S LiPo BEC: 5.5V–8.4V switchable 🚀 Take your SCX24 to the next level with smoother climbs, better low-speed control, and simplified setup. This is the upgrade you've been waiting for.

Read more less

Waterproof Performance. Micro-Sized Precision. The Hobbywing Quicrun Mini24 ESC Combo is engineered for 1/24-scale crawlers and micro RC vehicles that demand big performance in a small package. Designed to handle sensorless brushless or brushed motors, this combo pairs the Quicrun 1621SL 3500Kv outrunner motor with a fully waterproof 25A ESC — giving you smooth throttle control, rock-solid reliability, and torque that dominates tight climbs and technical terrain. Ideal for drivers who want precision crawling, smooth low-speed control, and the durability to run anywhere, rain or shine. ⚡ Features: 🔋 Dual Motor Support: Compatible with both sensorless brushless and brushed motors. 🌧️ Fully Waterproof Design: Ready for mud, water, and wet rock trails. ⚙️ Real-Time Drag Brake Adjustment: Fine-tune drag brake force instantly via your transmitter’s AUX channel. 💪 Powerful Built-in BEC: Switchable 6V or 7.4V output to handle high-torque micro servos. 🧠 Smart Protection Suite: Overheat, throttle signal loss, and low-voltage protection included. 🧰 Compact Size, Big Power: Ideal fit for 1/24-scale crawlers and compact trail rigs. 📊 Specifications: Motor (1621SL Brushless Outrunner): KV Rating: 3500Kv Voltage: 2–3S LiPo Watts: 39.1W Type: Sensorless Brushless Outrunner Dimensions: 15.8 × 21 mm Shaft Diameter: 2.0 mm Weight: 16.7 g (with wire) ESC (Quicrun Mini24): Input Voltage: 2–3S LiPo Continuous / Peak Current: 25A / 60A BEC Output: 6V/7.4V @ 2A (switchable) Dimensions: 28.1 × 17.9 × 12 mm Weight: 10.8 g Motor Compatibility: Brushless (1621/1212/1806) or Brushed (050/130/180) Programming: Button or Hobbywing Program Box 📦 Includes: (1) Hobbywing Quicrun Mini24 Waterproof Brushless ESC (1) Hobbywing Quicrun 1621SL 3500Kv Outrunner Motor 💡 Pro Tip:Pair this combo with a 2S LiPo and high-torque servo setup for perfect throttle modulation and torque balance on technical climbs — ideal for Axial SCX24, FMS, TRX4M, and other micro crawlers.

Read more less

Italian engineering. Smooth power. Cool performance.The Marka Racing V2 2500KV Brushless Motor delivers high torque, precise throttle response, and exceptional durability for 1/28-scale Mini-Z racing. Developed and built in Italy, this compact motor combines premium materials with efficient cooling and a bold two-tone anodized finish that reflects Marka’s signature design style. With improved torque output and acceleration compared to standard VE motors, the V2 series gives racers a competitive edge on both technical tracks and long straights. Its 15 mm aluminum heatsink can features multiple ventilation ports to keep temps low, while precision Japanese dual ball bearings ensure smooth, reliable operation. ⚙️ Features 2500KV brushless power optimized for 1/28 Mini-Z platforms Aluminum heatsink can (15 mm) with front & side ventilation holes Black anodized can / red anodized end-bell — Marka signature finish High-quality stator windings for maximum torque and long life Replaceable 6×13.5 mm rotor with 2 mm shaft (interchangeable sizes available) Dual Japanese ball bearings for smooth rotation Fixed timing for consistency and reliability Fits Kyosho, PN Racing, GL Racing, Atomic, Xpower motor mounts Compatible with MR02, MR03, AWD, F1, GLR, GLA, GLF, BZ, and more 📊 Specifications Spec Detail Scale 1/28 Type Brushless (Sensorless) KV Rating 2500 KV RPM @ 8.4 V 23 000 RPM Voltage Range 2S LiPo / 4× NiMH (4.8 V) No-Load Current 0.2 A Timing Fixed Rotor Size 6.0 × 13.5 mm Shaft Diameter 2 mm Weight 17.3 g Bearing Type Dual Japanese Ball Bearings Can Diameter 15 mm Aluminum Heatsink 🔧 Installation Notes Use M2×4 mm countersunk screws for PN Racing motor mounts Use M2×4 mm button screws for GL Racing or Atomic mounts Recommended wire: Marka 22 AWG / 0.35 mm Silicone Wire (MRK-3108) Screws not included

Read more less

Smooth power. Precision control. Mini-Z performance perfected.The Atomic Zenon 4500KV Sensored Brushless Motor delivers high-efficiency power and ultra-smooth throttle response for Mini-Z racers looking to push their setup to the next level. Designed for precision handling and reliable torque delivery, this motor gives you the speed and feel needed to dominate tight technical tracks or long straightaways alike. Built to Atomic’s exacting standards, the Zenon motor features advanced sensored technology for consistent performance, fine throttle modulation, and improved low-end response — making it ideal for both stock and modified Mini-Z racing classes. ⚙️ Features 4500KV sensored brushless motor for Mini-Z platforms Delivers smooth, linear throttle response and strong torque High-efficiency rotor and stator design for maximum power with minimal heat Precision balanced for stable, vibration-free performance Compatible with Atomic and Kyosho Mini-Z MR-03, EVO, and similar brushless setups Compact and lightweight design for perfect chassis balance 📏 Specifications Spec Detail Motor Type Sensored Brushless KV Rating 4500KV Application Mini-Z 1/28-scale chassis Model Number MO-046 Manufacturer Atomic RC

Read more less

Unleash smooth, efficient power with the LC Racing 2840 4500kV Brushless Motor, designed for precision performance in LC Racing 1/14–1/16 scale vehicles. Compact, powerful, and reliable, this motor delivers exceptional acceleration, top speed, and thermal stability — perfect for racers looking to upgrade their mini-class performance. 🔥 Key Features: 4500kV brushless sensorless motor for efficient power delivery Durable 2840-size can for ideal weight and balance 3.175mm shaft compatible with standard mini-class pinions High-quality bearings for smooth, quiet operation Aluminum can design for improved heat dissipation Factory-wired bullet connectors for quick installation Ideal match for LC Racing 35A or 50A brushless ESC systems ✅ Compatibility: LC Racing EMB-WRC, EMB-TG, EMB-MT, EMB-SC, EMB-DT, EMB-1, and similar 1/14–1/16 LC Racing models Fits other small-scale vehicles using 2840-size motors with 3.175mm shaft 📦 Includes: (1) LC Racing 2840 4500kV Brushless Motor ⚠️ Tip:For best performance, pair with a 35A or 50A LC Racing ESC and gear appropriately for your track conditions to avoid overheating. 🏎️ Recommended For: 1/14–1/16 scale Buggy, Truggy, Rally, and Monster Truck applications Excellent upgrade for LC Racing RTR models seeking higher speed and torque balance

Read more less

Overview:The Arrma 550 14T Brushed Motor is a powerful and reliable replacement motor designed for Arrma 1/10 scale brushed vehicles. Built with durability in mind, this motor delivers consistent torque and smooth acceleration, making it ideal for both beginners and backyard bashers. Its rugged construction ensures long-lasting performance, even under demanding conditions. Features: 550-size 14-turn brushed motor Provides reliable torque and smooth throttle response Durable design built for bashing and off-road fun Black can finish with Arrma logo for a clean look Genuine Arrma replacement part Compatibility: Direct replacement for select Arrma 1/10 4x4 brushed models, including: Granite 4x4 MEGA Senton 4x4 MEGA Big Rock 4x4 MEGA Typhon 4x4 MEGA May also be compatible with other vehicles using a 550-size brushed motor (check manual) Includes: (1) Arrma 550 14T Brushed Motor (Black) Part Number: ARA390307 ⚡ Pro Tip: Pair this motor with a fresh pinion gear and properly geared ESC setup to maximize runtime and keep temps under control.

Read more less

This Hobbywing 10BL60 G2 ESC (rebranded for LC Racing) delivers reliable sensored performance in a plug-and-play format—perfect for 1/10 scale on-road and off-road vehicles. Compact and powerful, it’s a great fit for RTR upgrades or custom builds that demand precision and punch. 🔧 Key Features: 60A Sensored ESC – Smooth throttle control with consistent power delivery Includes Cooling Fan – Actively keeps temperatures low under heavy load Plug & Play Ready – Pre-installed T plug (Deans) and 3.5mm bullet connectors for the motor Wide Compatibility – Suitable for 2S–3S LiPo and 5–9 cell NiMH setups Perfect Match – Ideal for 540-sized sensored brushless motors 📦 Includes: (1) Hobbywing 10BL60 G2 Sensored 60A ESC w/ T-Plug (1) Cooling fan pre-installed (3) 3.5mm bullet connectors (motor leads) 🚫 Sensor wire not included – sold separately

Read more less

Take your micro RC vehicle to the next level with the LC Racing 5150kV Sensored Brushless Motor. Engineered for efficiency and performance, this motor delivers smooth throttle response, optimal low-speed control, and high-RPM power—all in a compact, durable design. 💥 Key Features: Sensored Design: Smooth, precise throttle control—ideal for technical courses and racing. High Output: 5150kV rating for aggressive power delivery and performance. Precision Shaft: 3.175mm motor shaft fits most 1/14–1/16 scale applications. Efficient & Reliable: Built to handle the demands of competitive driving. Compatible with LC Racing vehicles and many other micro scale models. 📦 Includes:  • (1) LC Racing 2840 5150kV Sensored Brushless Motor **No Sensor wire included  

Read more less

Replacement 23-turn brushed motor for LaTrax® vehicles. Restore your LaTrax® vehicle’s performance with the Traxxas 7575R 370-Size Brushed Motor. This 23-turn motor is designed as a direct replacement and includes pre-installed bullet connectors for quick and easy installation. 🔧 Features: 23-turn brushed design 370-size motor Pre-wired with bullet connectors Delivers smooth and reliable power Genuine Traxxas® replacement part 💥 Compatibility: LaTrax® Teton® LaTrax® Rally LaTrax® Desert Prerunner Perfect for keeping your LaTrax® vehicle running strong with factory-spec performance!

Read more less

⚡ Compact Power with Smart Control!The MAX10 G2 80A + 3652SD 4100kV combo is the ultimate upgrade for lightweight 1/10 scale buggies, short course trucks, and on-road machines. With smart sensored brushless tech, real-time data capabilities, and efficient cooling, this combo delivers lightning-fast response and reliable performance in a small package. 🧠 ESC Features: 80A continuous / 520A burst IP64 waterproof protection Turbo timing up to 32° for extra speed Smart Start-Stop fan control Enhanced Freewheeling tech = cooler operation Real-time data logging + app support (OTA module required) Built-in BEC: 6V/7.4V @ 5A 🔧 Motor Specs: Kv Rating: 4100Kv Size: 3652SD G3 (37mm x 53mm) Shaft: 3.17mm x 15mm 4-pole sensored brushless motor Weight: 227.9g LiPo: 2–3S compatible 📦 Includes: (1) EZRun MAX10 G2 80A ESC (XT60 plug) (1) EZRun 3652SD G3 4100kV Brushless Motor (1) Sensor Cable ✅ Ideal For:1/10 On-Road • Buggies • Lightweight SCTs • Stadium Trucks 💥 Lightweight. Efficient. Powerful. If you're building a 2S/3S speed machine, this combo brings next-level smoothness, control, and acceleration!

Read more less

Unlock next-level speed and precision for your 1/28th-scale racer. The Hobbywing EZRun MINI28 Sensored Brushless Combo delivers an insane amount of performance in an ultra-compact package — combining a feature-rich ESC with a powerful, smooth 1626 sensored brushless motor. Designed specifically for competitive Mini-Z-style 1/28 racing, this combo gives you the control, adjustability, and efficiency needed to dominate tight layouts and technical tracks. About the EZRun MINI28 System Micro Size, Monster Performance The MINI28 ESC is tiny — just 22.7×14.2×11.8mm — but packed with advanced tuning options, including 26 adjustable parameters, a high-voltage adjustable BEC, and full compatibility with the Hobbywing OTA Module (sold separately) for smartphone programming. The included 1626 3500Kv sensored brushless motor delivers zero-cogging startup, crisp low-speed control, and big power up top. When paired with the MINI28 ESC, timing boost can drastically increase RPM for max straight-line speed. ESC Features Built specifically for 1/28 scale racing Ultra-compact and lightweight — fits almost any chassis Integrated aluminum heat sink for consistent temps Dual-mode app support (with optional OTA module) Sensored & sensorless brushless compatibility Adjustable high-voltage BEC (6V / 7.4V, 3.5A peak) ESC Specifications Continuous / Peak Current: 30A / 80A LiPo: 2S BEC: 6V/7.4V adjustable (3.5A peak) Size: 22.7×14.2×11.8mm Weight: 5g Motor Limit: 1626 size Motor Features (1626 – 3500Kv) Zero-cogging, ultra-smooth startup Excellent efficiency & cool operation Precision response and consistent torque Modular design for easy cleaning & maintenance Massive top-speed gains when using ESC timing Motor Specifications kV: 3500 Poles: 2 Input Voltage: 2S Diameter: 16mm Length: 26mm Shaft: 1.8mm x 8.5mm Weight: 18g Includes (1) EZRun MINI28 Sensored Brushless ESC (1) EZRun 1626 Sensored Brushless Motor (3500Kv) Wiring harnesses ESC Manual  

Read more less

Motor Overview:The Team Exalt XLR8 1/8 Sensored Brushless Long Can Truggy Motor is built from the ground up for racers who demand top-tier speed, torque, smoothness, and durability in 1/8 truggy competition. Engineered around a long 74mm can, this motor packs massive punch while maintaining ultra-refined control thanks to its advanced sensing system and premium internal design. A staggered-magnet rotor delivers both low-drag efficiency and huge torque, while the high-purity copper windings and heat-resistant magnet formula ensure consistent performance run after run. Add in a fully rebuildable architecture — including a replaceable sensor board — and you’ve got a high-end truggy motor designed to win championships and take abuse doing it. To keep temps under control even in brutal racing conditions, Exalt uses a 2mm-thick aluminum can paired with ventilation ports that allow airflow in while keeping debris out. The result is a high-power 1/8 truggy motor that stays cool, reliable, and consistent all day long. Features: Long-can 74mm design for extreme torque & power Staggered-magnet rotor for low drag and incredible punch Adjustable timing from 0–40° (CW/CCW) Sensored & sensorless compatible Rebuildable with replaceable sensor board High-purity copper windings High-strength, heat-resistant magnet formula Top-quality alloy steel 5mm output shaft Advanced hall-sensing separation design for smoother throttle response Large vent ports for airflow while blocking debris ROAR Approved! Specifications: Type: Sensored Brushless kV: 2350kV Voltage: 2–4S LiPo (7.4–14.8V) Poles: 4 Timing: 0–40° Adjustable (CW/CCW) Diameter: 41.8mm (1.645") Length: 74mm (2.91") Shaft Diameter: 5mm Shaft Length: 17.7mm (0.696") Weight: 386g (13.6oz) Application: 1/8 Truggy Competition Includes: (1) Team Exalt XLR8 1/8 Sensored Brushless Long Can Truggy Motor (2350kV) (1) Sensor Wire

Read more less

The Reedy Sonic 540-FT 13.5T Competition Brushless Motor delivers professional-level performance at an affordable price. Designed for spec racing, clubs, and racing series where equalized performance is key, this ROAR-approved motor combines precision engineering with durability and ease of maintenance. Featuring a lightweight CNC-machined can, high-strength balanced rotor, and dual ball bearings for smooth operation, the 540-FT offers exceptional value without compromising performance. Its fixed 45-degree timing ensures consistent power delivery and reliability for all racers. ⚙️ Features: CNC-machined lightweight aluminum can for superior cooling and precision High-strength balanced rotor for smooth, efficient operation Dual precision ball bearings for long-lasting performance Fixed 45° timing for consistency and spec-class fairness Easy-to-solder tabs for clean wiring and quick installation Fully rebuildable design for extended motor life ROAR approved for sanctioned competition use 📏 Specifications: Turns: 13.5T Timing: Fixed (45°) Input Voltage: 1–2S LiPo Diameter: 35.8 mm Length: 51.8 mm Shaft Diameter: 3.15 mm Weight: 175 g 📦 Includes: (1) Reedy Sonic 540-FT 13.5T Fixed Timing Brushless Motor 💡 Pro Tip:Pair the Sonic 540-FT with a Reedy Blackbox 600Z ESC and Reedy LiPo 2S Shorty Pack for a smooth, balanced, and race-ready setup right out of the box.  

Read more less

⚙️ Genuine Replacement Power for Your Mini-Z! Keep your Mini-Z running at peak performance with the Kyosho MR-03/MR-04 Motor Set. Designed as a direct replacement for RWD Mini-Z MR-03 and MR-04 platforms, this motor delivers smooth power delivery, efficient operation, and factory-spec reliability. Whether you’re rebuilding, maintaining, or restoring your Mini-Z, this genuine Kyosho part ensures long-lasting performance and precision fit. ⚡ Features: Genuine Kyosho replacement motor for MR-03 & MR-04 RWD chassis Smooth, efficient brushed design for reliable power Factory-tuned for consistent performance and durability Direct plug-and-play installation — no modification needed Ideal for maintenance, repair, or rebuild projects 📦 Includes: (1) MR-03/MR-04 Motor Set 🔧 Compatibility: Kyosho Mini-Z MR-03 Kyosho Mini-Z MR-04 💡 Pro Tip:Pair this replacement motor with fresh bearings and cleaned gears for the smoothest possible power delivery and maximum runtime on track.

Read more less

⚡ Stock replacement motor for dependable performance. The Traxxas 7075 Titan 380 Brushed Motor (18-Turn) is a direct replacement for select Traxxas models, delivering smooth, consistent power in a compact design. Featuring an internal cooling fan for longer runtimes and improved durability, this motor is built to keep your RC running strong during high-action fun. ✅ Genuine Traxxas replacement part✅ 18-turn design for balanced speed & torque✅ Pre-installed bullet connectors for easy install✅ Integrated cooling fan for extended life 📦 Includes:• (1) Traxxas Titan 380 Brushed Motor (18T) Compatibility: Traxxas 1/16 E-Revo VXL & Brushed Traxxas 1/16 Summit Traxxas 1/16 Slash Traxxas 1/16 Rally

Read more less

Team Exalt Phoenix Gold Spec Brushless 2S Motor (10.5T)📦 Part #: EXA01105GSC | ROAR Approved The Phoenix Gold Spec 10.5T 2S Motor by Team Exalt is built for drivers who demand the pinnacle of speed, consistency, and craftsmanship. Hand-assembled with top-tier materials and precision-tuned using Motolyser technology, this motor delivers unmatched performance for serious 1/10 scale racing. 🏁 Gold Spec Highlights: Hand-selected top-percentage stator and rotor Sensor deviation ≤1.0° Motolyser-tuned for max output and consistency Grade 10 metal shielded ceramic bearings Sealed with Gold Spec certification for guaranteed performance ⚙️ Key Features: Optimized specifically for 2S LiPo operation New 90° solder tabs for clean, efficient installs Infinite timing adjustment to dial in your setup Durable 7075 CNC-machined aluminum 2-piece can Ultra-rare earth magnets withstand intense heat EXAS2305 rotor included Thermal epoxy-filled stator ensures cool, consistent power Replaceable sensor board and high RPM bearings Fully rebuildable for extended motor life ROAR Approved 📦 Includes: (1) Phoenix Gold Spec Brushless 2S Motor (10.5T) (1) Sensor Cable 🏆 Push the limits of your 2S class with elite-level performance — the Phoenix Gold Spec 10.5T is built to dominate.

Read more less

⚡ Hobbywing XR10 Pro G3 1/10 160A ESC – Advanced Modified-Class Dominance 🏁 Built for the most demanding modified-class racers, the Hobbywing XR10 Pro G3 delivers the edge you need to compete at the highest level. 🔥 This ESC is engineered for 1/10 touring cars and buggies, offering unmatched control, top-tier power delivery, and advanced customization. Featuring reverse polarity protection, smart cooling, and variable frequency control, the Pro G3 adapts to changing track conditions with precision and durability. ✨ Key Features: ⚡ 160A Continuous Current – Handles aggressive modified-class motors with ease🛡️ Reverse Polarity Protection – Prevents damage from incorrect battery connection (*see note below)📊 Built-In Data Logging – Monitor throttle, voltage, current, temperature, RPM & more🔧 Three Customizable Profiles – Adapt settings to on-road, off-road, or track-specific setups🌀 Frameless Cooling Fan – Durable, debris-resistant, smart on/off function🔁 Variable Frequency PWM & Brake Control – Precision tuning for throttle and braking response💨 Softening Power Delivery – Fine-tunes acceleration for smoother, controlled launches🛑 Disc Brake Mode – Enhanced braking performance for tighter control🛡️ ESC & Motor Thermal Protection – Built-in safeguards for reliability and longevity 📦 What's in the Box? ✔️ (1) Hobbywing XR10 Pro G3 160A ESC (Titanium Grey)✔️ (1) Cooling Fan (Frameless, Smart-Stop Enabled)✔️ Decals & Accessories✔️ User Manual 📊 Specifications: Application: 1/10 Touring Car & Buggy (Modified) Motor Type: Sensored & Sensorless Brushless Input Voltage: 2S LiPo Only Continuous Current: 160A Peak Current: 1200A Motor Limits:• Touring Car: ≥ 4.5T• Buggy: ≥ 5.5T BEC Output: 5V–7.4V (Adjustable) @ 5A Size: 35 x 33.6 x 30.3mm Weight: 93g Connectors: Solder Tabs (Motor/Battery) Programmable: Yes (OTA Module or LCD Program Box Pro)** 📌 Tech Note: While the ESC has reverse polarity protection, the capacitor is still vulnerable to reverse connection damage. Always double-check wiring before connecting. 📌 Programming Tools: OTA Programmer: 30850400 LCD Program Box Pro: 30502002 🏁 The ESC Trusted by Champions Whether you're tearing up the asphalt or launching over jumps, the XR10 Pro G3 delivers rock-solid consistency and peak performance in every class-legal 1/10 modified setup. 💡 Dominate the Track – Upgrade to Hobbywing XR10 Pro G3 Today!

Read more less

Hobbywing Xerun XR14 Sensored Brushless ESC/2848SD Motor Combo (2800kV) 🔥 High-Performance Brushless ESC & Motor Bundle! 🚗💨 Elevate your 1/14 scale on-road and off-road performance with the Hobbywing Xerun XR14 Sensored Brushless ESC & 2848SD Motor Combo (2800kV)! This combo pairs a competition-grade ESC with a high-efficiency brushless motor, delivering smooth throttle response, powerful acceleration, and superior durability. 🏆 Whether you're racing in Blinky or Boost formats, the sensored system ensures precise control, low-speed smoothness, and high-speed stability—making it the perfect choice for serious RC racers. ✨ Key Features: ⚡ 70A Continuous Output Current – Stable and reliable power under intense race conditions 🛠️ 26 Adjustable Parameters – Fine-tune throttle, braking, boost/turbo timing, and more 🔥 Full-Metal Heat Sink Case – Optimized cooling for extended performance 🔋 Reverse Polarity & Thermal Protection – Prevents damage from incorrect battery connections 🛞 4-Pole Motor Design – Ultra-smooth acceleration and efficient power delivery 📊 Built-In Data Recording – Access performance stats via the Hobbywing Link App 💨 Adjustable PWM & Brake Frequency – Customizable for both on-road and off-road racing 🏁 IP5X Dustproof Motor Protection – Designed for durability in harsh environments 📦 What’s in the Box? (1) Hobbywing Xerun XR14 Sensored Brushless ESC (1) Hobbywing Xerun 2848SD 4-Pole 1/14 Brushless Motor (2800kV) 🔥 (1) Cooling Fan 🌀 Factory Decals & Accessories Product Manual 📖 📊 ESC Specifications: Suggested Applications: 1/14 On-Road & Off-Road Racing, 1/12 & 1/10 Light Load Vehicles Motor Type: Sensored/Sensorless Brushless Input Voltage: 2S LiPo (7.4V) Continuous Current: 70A Peak Current: 300A Motor Limits: 540-Size (>6000kV or 8.5T) BEC Voltage: 6V/7.4V at 4A Battery & Motor Connectors: Solder ⚡ Motor Specifications: Motor Type: Sensored Brushless kV Rating: 2800kV Input Voltage: 2S-3S LiPo (7.4V-11.1V) Adjustable Timing: 20-40° Diameter x Length: 1.12 x 1.89 in (28.5 x 48mm) Shaft Diameter: 0.13 in (3.175mm) Weight: 3.52 oz (100g) Poles: 4 Application: 1/14 or 1/12 On-Road & Off-Road 📌 Tech Note: The OTA Programmer (HWA30850400) or LCD Program Box Pro (HWA30502002) is required to access data logging for throttle, voltage, temperature, RPM, vehicle speed, and more. 🏁 Take Your Racing to the Next Level! 🔥 Whether you're fine-tuning your setup for maximum efficiency or pushing for top-speed dominance, the Hobbywing Xerun XR14 ESC & 2848SD Motor Combo delivers race-winning performance and ultimate reliability. 💨 Upgrade today and dominate the track with Hobbywing! 🏆🏁  

Read more less