Take your SCX24 or 1/18 micro crawler to the next level of performance with the officially licensed Maxxis Trepador 1.0" Pre-Mounted Tires. Standing at a massive 2.5" tall, these oversized crawler tires deliver extreme traction, aggressive styling, and the ultimate capability for rocks, sand, loose dirt, and technical terrain. Mounted on true 3-piece Holcomb bead-loc wheels—scaled down from Pro-Line’s full-size 1/10 design—this set is ready for instant installation and max grip right out of the package. 🧱 Tire Overview Designed from the real 1:1 Maxxis Trepador, these mini tires replicate: Ultra-aggressive sidewall lugs for superior rock bite Multi-curve tread blocks for traction on loose and slippery surfaces Staggered tread elements that maintain a consistent contact patch Oversized 2.5" height (63.5mm) for huge ground clearance Made from a soft-performance compound, these tires provide incredible adhesion on technical rock lines and trail obstacles. ⭐ Key Features Officially licensed Maxxis Trepador tread Oversized 2.5" (63.5mm) outer diameter for extreme crawling clearance Soft compound for maximum real-world traction Ultra-aggressive sidewall for sand, rock, and dirt True 3-piece bead-loc Holcomb wheels (no glue required) +2mm wheel offset for a wider, more stable stance Pre-mounted for fast installation Made in the USA 📏 Specifications Scale: 1/24 & 1/18 Outer Diameter: 2.5" (63.5mm) Inner Diameter: 1.0" Width: 0.83" (21mm) Wheel Hex: 7mm 📦 Includes (4) Maxxis Trepador 1.0" Tires (Pre-Mounted) (4) Black Holcomb 3-piece Bead-Loc Wheels

Read more less

Replace worn or damaged drivetrain components with the Traxxas TRX-4M High Trail Center Driveshaft Set. These extended center driveshafts are factory-equipped on TRX-4M High Trail Edition models and are precision-engineered for a perfect, hassle-free fit. Designed specifically for the High Trail wheelbase, these driveshafts provide smooth, reliable power transfer to the axles and install easily as a direct replacement using the included hardware. ⚠️ Important: These are extended driveshafts and will NOT fit standard TRX-4M models. Features Genuine Traxxas replacement parts Factory-spec fit for TRX-4M High Trail Edition Extended length for High Trail wheelbase Smooth, reliable drivetrain performance Easy, direct replacement installation Compatibility Traxxas TRX-4M High Trail Edition(Monster Truck & Micro Crawler versions) ❌ Not compatible with standard TRX-4M models Includes (1) Front Center Driveshaft (1) Rear Center Driveshaft (2) O-Rings (2) Pins (6) Mounting Screws  

Read more less

Upgrade durability and drivetrain efficiency with the Traxxas TRX-4M Aluminum Center Driveshaft Set. Machined from high-strength 6061-T6 aluminum, these optional center driveshafts replace the stock plastic units to reduce flex under load and deliver smoother, more efficient power transfer. Designed for use on both the front and rear of the TRX-4M platform, these driveshafts add strength where it counts while also giving your rig a clean, customized look with multiple anodized color options. Important: Requires TRX-4M Metal Driveshafts (TRA9751), sold separately. Features Precision-machined 6061-T6 aluminum construction Increased strength and durability over stock plastic driveshafts Reduced drivetrain flex for improved power transfer Direct fit for front and rear center positions Available in multiple anodized colors for custom styling Available Colors Orange Green Red Gray Blue Compatibility Traxxas TRX-4M Traxxas TRX-4MT Includes (1) Front Aluminum Center Driveshaft (1) Rear Aluminum Center Driveshaft  

Read more less

Take your micro crawler to extreme-terrain performance with the INJORA 1.3" Aluminum Wheels + Swamp Claw 70×27mm Tire Set.With oversized 70mm tires molded in INJORA’s ultra-sticky S5 Super Soft compound paired with CNC-machined aluminum beadlock wheels, this setup is built for maximum grip, deep mud traction, and aggressive crawling capability. ⚠️ Important Fitment Note:These 70mm tires are BIG — only recommended for modified crawlers.They will NOT fit most stock 1/24 or 1/18 bodies without trimming or lift mods. ⭐ Compatible With FMS FCX24 Smasher (fits well) INJORA 1/18 Rock Tarantula Body Custom 1/24 or 1/18 crawler builds with enough clearance 🔥 Features Complete 1.3" wheel + tire set S5 compound Swamp Claw tires = super soft, super sticky, extreme traction CNC-machined aluminum beadlock wheels Huge 70mm outer diameter for maximum obstacle clearance Designed for aggressive custom builds Tires and wheels arrive unassembled so you can fine-tune foam and bead seating 📐 Wheel Specifications (W1305) Material: Aluminum Color: Black Outer Diameter: 33.5mm (1.32") Width: 16.5mm (0.65") Hub Size: 7mm (0.28") Negative Offset: –5.25mm Weight: 28g each Hardware per wheel: 22× M1.6×3.9mm screws 5× M2×4.3mm screws Tool Required: 1.5mm hex driver 📐 Tire Specifications (T1319) Compound: INJORA S5 Super Soft Material: High-grip rubber Outer Diameter: 70mm (2.76") Width: 27mm (1.06") Weight: 19g each 📦 Package Includes (4) INJORA 1.3" Aluminum Beadlock Wheels (4) INJORA 70×27mm Swamp Claw S5 Tires

Read more less

Upgrade your micro crawler with the aggressive stance and premium performance of the INJORA 1.3" CNC-Machined Aluminum Beadlock Wheels. Designed specifically for INJORA 1.3" tires, these wheels deliver improved stability, scale realism, and a wider, more planted look thanks to their -5.25mm negative offset. Perfect for 1/24 and 1/18 scale crawlers running INJORA 1.3" tires, including TRX4M builds, SCX24s with 1.3" conversions, and custom micro rigs. ⭐ Features Precision-machined CNC aluminum construction True beadlock design — no glue required Larger wheel diameter enhances scale appearance Negative offset for a wider, more stable stance High-quality hardware for durability and rigidity Premium black anodized finish Note:These wheels are only compatible with INJORA 1.3" tires. 📐 Specifications Part Number: W1305 Material: Aluminum Color: Black Outer Diameter: 33.5mm (1.32") Width: 16.5mm (0.65") Wheel Hub Size: 7mm (0.28") Offset: -5.25mm Weight: 28g per wheel (0.99oz) Hardware Included: 22 × M1.6×3.9mm screws (per wheel) 5 × M2×4.3mm screws (per wheel) Required Tool: 1.5mm hex driver 📦 Includes (4) INJORA 1.3" Aluminum Beadlock Wheels (Black)  

Read more less

Take your TRX4M steering performance to the next level with the INJORA INJS11 High-Torque Coreless Servo. With up to 11kg-cm of torque at 8.4V, a fast coreless motor, and a full aluminum case, this servo is a major upgrade for any TRX4M crawler running big tires, heavy bodies, or demanding trail terrain. Designed specifically for the 1/18 TRX4M platform, this servo delivers precision, speed, and strength far beyond the factory unit. Important Notes: ❌ Not compatible with the stock TRX4M servo mount or horn ✔ Requires a special INJORA servo mount & horn ❌ Not waterproof — do not submerge or drive in rain ✔ Compatible with all TRX4M models: Defender, Bronco, High Trail K10, High Trail F150 ⭐ Features High-speed coreless motor for quick response Up to 11KG torque at 8.4V CNC-machined aluminum case for cooling and durability Stainless steel gears for strength and longevity 25T mini spline (Φ4.9) Ideal for upgraded crawlers with heavy accessories or big tires 📐 Servo Specifications Part Number: INJS11 Operating Voltage: 6.0V–8.4V Torque: 8kg-cm @ 6V 9.5kg-cm @ 7.4V 11kg-cm @ 8.4V Speed: 0.106"/60° @ 6V 0.085"/60° @ 7.4V 0.074"/60° @ 8.4V Rotation Range: RC: 90° ±5° PWM 500–2500 μs: 180° ±5° Motor: Coreless Gears: Stainless Steel Spline: 4.9mm Mini 25T Bearings: Dual Ball Bearing Dimensions: 32 × 12 × 27mm Weight: 21g (0.74oz) 🔧 Tools Required 1 × 0.05" (1.27mm) hex driver 1 × 1.5mm hex driver

Read more less

Transform your TRX4M into a custom half-truck crawler with the INJORA IR40 Hard Body Kit. Featuring a detailed ABS construction, back-half cage, clipless front mount, and integrated LED lighting, this upgrade delivers both scale realism and trail performance. Designed specifically for the TRX4M Defender & Bronco wheelbase (155mm), this body offers a perfect fit with stock rails or the INJORA Universal TRX4M chassis. Choose from multiple color options — or pick the unpainted white version to create your own custom scheme. Note: Fits TRX4M Defender & Bronco (155mm wheelbase) Fits INJORA Universal TRX4M chassis Compatible with INJORA 1.3" wheels & 70mm tires Not compatible with TRX4M High Trail K10/F150 unless the rails are shortened ⭐ Features Detailed ABS hard-plastics half-truck body Back-half cage design for scale appearance Front clipless mounting + rear hook-and-loop hinge for fast access Simple “4-screw” installation method Includes front bumper + front white LED and rear red LED lighting Perfect for custom builds and low-CG crawler setups Comes unassembled for full customization 🎨 Available Colors Grey Green Blue White (Unpainted — ready for custom paint) 📐 Specifications Part Number: IR40 Material: ABS Plastic Weight: 87g (3.07oz) Wheelbase: 155mm (6.10") Body Size: 210 × 82 × 75mm (8.27" × 3.23" × approx. 3") 📦 Includes (1) IR40 Half-Truck Hard Body Kit (1) Front Bumper (1) Front & Rear LED Light Set (1) Body Assembly Manual  

Read more less

Add eye-catching scale lighting and custom glow effects to your RC build with the INJORA Flexible Cuttable LED Strip Lights.These ultra-thin, bendable LED strips are designed specifically for RC bodies, allowing you to wrap contours, outline body lines, or create dramatic illumination on 1/10, 1/18, 1/24, and other custom projects. Choose from six vibrant colors and cut the strip to your desired length for a perfect fit on any body shell. Note: For lighting modes such as steady, breathing, and strobe, an additional light controller is required.Do NOT pull or stretch the strip during installation. ⭐ Features Available in six colors: Warm White, Red, Ice Blue, Pinkish Purple, Green, Dark Blue Ultra-flexible design wraps easily around curved surfaces Cuttable strip lets you customize the exact length you need Bright illumination for night crawling, racing, or scale realism Easy installation with included cable ties (glue can be used if preferred) Perfect for RC crawlers, bashers, drifters, and custom scale builds 📐 LED Strip Specifications Part Number: L42 Operating Voltage: 5–7.4V Total Wire Length: 550mm LED Strip Length: 290mm LED Strip Width: 2mm Available Colors: Warm White Red Ice Blue Pinkish Purple Green Dark Blue Weight: 6g 🔌 Optional Light Controller (Sold Separately) Lighting Modes: Steady • Breathing • Strobe Control Methods: Manual button CH3 on transmitter Length: ~175mm (6.89") Weight: 3.2g 📦 Includes (1) Flexible LED Strip Light Cable ties for wire management  

Read more less

Light up the trail beneath your rig with the INJORA Rock Lights Kit, designed specifically for 1/18 and 1/24 scale crawlers.With multiple mounting bracket options, bright LED output, and flexible control modes, this kit adds both scale realism and functional illumination to your SCX24, AX24, TRX4M, Ascent18, and more. Choose White or Yellow LEDs, and select the correct screw size for your vehicle. ⭐ Features 3 Lighting Modes: Steady • Breathing • Strobe Bright ground-lighting LEDs for night runs and scale realism Includes cable ties for clean wire management Plug-and-play installation Flexible control options: Manual: Built-in button cycles through modes Remote: Plug into CH3 or CH4 and switch modes from your transmitter Two mounting bracket types for multiple vehicle fitments 🔧 Fitment / Screw Size Options M1.4 Screws (1/24 models) Axial SCX24 Axial AX24 M2.0 Screws (1/18 & 1/24 models) Traxxas TRX4M Redcat Ascent18 Other 1/18 & 1/24 crawlers using M2 hardware 📐 Specifications Light Mount Material: Aluminum Operating Voltage: 5V–7.4V LED Colors: White or Yellow Wire Length: ~245mm (9.65") Variants: DG-L35-4 — White LEDs, M1.4 screws DG-L36-4 — White LEDs, M2 screws DG-L35-4YE — Yellow LEDs, M1.4 screws DG-L36-4YE — Yellow LEDs, M2 screws 📦 Includes (4) LED Rock Lights Aluminum mounting brackets (1) Light controller Cable ties Mounting screws (M1.4 or M2 depending on selection)  

Read more less

Boost the steering power and durability of your TRX4M with the INJORA INJS2065 Waterproof High Voltage Digital Servo. Designed specifically for 1/18 TRX4M crawlers, this servo delivers strong torque, fast response, and full IP66 waterproof performance — perfect for trail, mud, snow, and creek crossings. This upgrade includes both the aluminum servo mount AND a 25T servo horn, giving you everything needed for a clean, direct installation. ⚠️ IMPORTANT:• Use only with the included INJORA servo mount for proper fitment.• If using the stock plastic TRX4M mount, trimming is required. 🔧 Compatibility Fits all 1/18 Traxxas TRX4M models: TRX4M Defender TRX4M Bronco TRX4M High Trail K10 TRX4M High Trail F150 ⭐ Features IP66 waterproof — safe for rain, mud, and underwater driving High-voltage digital servo (6V–8.4V) Strong stainless steel gears Fast response with excellent precision Includes aluminum servo mount Includes 25T servo horn Lower noise, smooth operation Durable, compact upgrade for any TRX4M build 📊 Specifications Model: INJS2065Voltage Range: 4.8V–8.4VMotor: Core MotorDead Band: 2μsNeutral Position: 1500μs / 330Hz Speed 0.09s / 60° @ 6.0V 0.06s / 60° @ 8.4V Torque 6.0 kg-cm (83.3 oz-in) @ 6.0V 7.0 kg-cm (97.2 oz-in) @ 8.4V Rotation Angles RC Angle: 90–120° ±2° Wide Angle (500–2500μs): 180° ±2° Size & Weight Dimensions: 23 × 13 × 25.8 mm Weight: 20g Wire: JR 300mm Spline: 25T (5.9mm) Bearing: 1BB 🧰 Required Tools 1.5mm hex driver 2.0mm hex driver 📦 Includes (1) INJORA INJS2065 Waterproof Servo (1) Aluminum Servo Mount (1) 25T Servo Horn Mounting Hardware

Read more less

Upgrade your TRX4M steering performance with the INJORA 11KG Coreless High Torque Micro Servo, engineered for speed, power, and precision. Designed specifically for high-voltage setups, this compact servo delivers lightning-fast response and massive torque — perfect for crawling, trailing, and high-load steering on the 1/18 TRX4M platform. ⚠️ IMPORTANT NOTE:This servo is NOT compatible with the stock TRX4M servo mount or horn.A special servo mount + 25T micro horn is required.Not waterproof — avoid water, mud, and rain. 🔧 Compatibility Works with all 1/18 Traxxas TRX4M models: TRX4M Defender TRX4M Bronco TRX4M High Trail K10 TRX4M High Trail F150 Pairs perfectly with the INJORA Micro BEC for TRX4M (recommended for full HV performance). ⭐ Features Coreless motor for ultra-fast response Up to 11kg-cm (153 oz-in) of high-voltage torque CNC-machined aluminum case for maximum cooling and durability Stainless steel gears for long-term reliability Smooth and precise digital control Dual ball bearings for increased efficiency and longevity Mini 25T spline 📊 Specifications Part Number: INJS11Operating Voltage: 6V–8.4V Voltage Torque Speed (per 60°) 6.0V 8kg-cm (111 oz-in) 0.106s 7.4V 9.5kg-cm (132 oz-in) 0.085s 8.4V 11kg-cm (153 oz-in) 0.074s • RC Angle: 90° ± 5° Wide Angle (500–2500μs): 180° ± 5° Motor: Coreless Gears: Stainless Steel Spline: 4.9mm Mini 25T Bearings: Dual Ball Bearing Size: 32 × 12 × 27mm Weight: 21g (0.74oz) 🧰 Tools Required 0.05" (1.27mm) hex driver 1.5mm hex driver Servo may come with either a black or red horn 📦 Includes (1) INJORA INJS11 High Voltage Coreless Servo (1) Servo Horn (color may vary) Mounting hardware

Read more less

Exclusive Gold Edition • Clipless Mounting • Full Hard Body System Transform your TRX-4M into a show-stopping scale rig with the INJORA Limited Edition IR60 hard body set. This special Gold Edition offers a premium visual style paired with a rugged ABS construction and smart mounting features designed for convenience and realism. Compatible with both the Traxxas TRX-4M Defender & Bronco chassis and the INJORA Universal TRX4M chassis, this body kit delivers exceptional fit, durability, and scale detail. With dual grille options, a rear bed rack, rubber mirrors, and included LED lighting, the IR60 is built for serious builders and collectors. ⭐ Features Limited Edition Gold Finish for standout scale appearance Durable ABS pickup hard body with integrated bed rack Includes two interchangeable front grille styles Rubber rearview mirrors for added durability Clipless front mount + rear hook-and-loop hinge Quickly access chassis & battery by swinging the body upward Simple installation: only four screws required Includes front & rear LED lights for added realism 📏 Specifications Part Number: IR60-GD Material: ABS Plastic Color: Gold (Limited Edition) Weight: 78g Wheelbase: 155mm Size: 225 × 90 × 67mm 📦 Includes (1) INJORA IR60 Hard Body Kit (Gold) (1) Front & Rear LED Light Set (1) Body Assembly Manual ✅ Compatibility Traxxas TRX-4M Defender (1/18) Traxxas TRX-4M Bronco (1/18) INJORA Universal TRX4M Chassis

Read more less

  Keep your TRX-4M running strong with this genuine Traxxas 2S LiPo battery! Compact, lightweight, and built for performance, it delivers consistent 7.4V power and 750mAh capacity with a 20C discharge rate—perfect for extended crawling adventures. ✅ Capacity: 750mAh✅ Voltage: 7.4V (2S)✅ Discharge Rate: 20C✅ Connector: Traxxas High-Current✅ Compatible With: TRX-4M Engineered by Traxxas for optimal runtime, reliability, and fit in your TRX-4M.

Read more less

  🔥 Add style and performance to your mini crawler with these premium 1.0" beadlock wheels from BOOF RC. Finished in black and gold with real beadlock function, these wheels are perfect for scale builds and serious crawling. Specs:• Wheel Diameter: 1.0" (27mm)• Width: 15.8mm• Hex: Standard for 1/18 & 1/24 mini crawlers• Material: Brass ring for added weight, aluminum center Features:✔ Real beadlock design – no glue needed✔ Brass beadlock ring for low CG and better traction✔ CNC-machined for a perfect fit✔ Ideal for SCX24, FCX24, and similar rigs 💥 Boost your scale look and crawling performance!BOOF RC – Built for the climb.

Read more less

  Haul More. Adventure Further. Expand your TRX-4M’s capability with the Traxxas Utility Trailer w/ Hitch, the ultimate 1/18-scale accessory for adding realism and function to your trail runs. Perfectly scaled and built tough, this trailer lets you haul gear, accessories, and scale cargo while keeping your crawler’s performance light and nimble. Scale Realism Meets Functionality The TRX-4M Utility Trailer is pre-assembled and ready to attach right out of the box with its quick-connect hitch system. Designed for rugged off-road durability, it features a well-balanced frame, realistic wheels, and robust construction that keeps your cargo stable no matter where your trail leads. Take customization even further with optional add-ons like the LED Light Kit (TRA9790) and Side Panels (TRA9798) — sold separately — to elevate both the look and functionality of your setup. Features: Detailed 1/18-scale realism with authentic trailer design Durable construction for rugged off-road use Quick and secure hitch attachment to your TRX-4M Balanced weight distribution for smooth towing Lightweight design keeps crawler performance unhindered Fully assembled and ready to attach Compatible with optional accessories: LED Light Kit (TRA9790) Utility Trailer Side Panels (TRA9798) 1/18 Overlander Rack (Scale By Chris) Includes: (1) TRX-4M Utility Trailer (1) Trailer Hitch (2) Rear Preload Shock Spacers (2) 2.5×8 mm Screws Compatibility: Traxxas TRX-4M (All models) Traxxas Tough — Tow It. Haul It. Trail It.

Read more less

Unlock faster, smarter charging for your TRX-4M with the Traxxas EZ-Peak® iD® Charger Port Adapter! Designed to work seamlessly with Traxxas EZ-Peak iD Chargers, this adapter lets you charge your TRX-4M 7.4V 2S LiPo battery with all the enhanced features—faster charge times, automatic detection, and storage charging modes. 🔋 Compatible With: TRX-4M⚡ Works With: Traxxas EZ-Peak iD Chargers✅ Enables high-speed charging✅ Allows access to iD Charger features like storage mode✅ Genuine Traxxas part for a perfect fit Upgrade your charging game and get back on the trail faster!  

Read more less

  Overview:The Traxxas 7mm Wheel Hub Hex Set is a genuine replacement part for the TRX-4M 1/18 scale crawler. Precision-molded for durability, these hubs provide a secure and accurate wheel fit, ensuring smooth power transfer from the axles to the wheels. Perfect for replacing worn or damaged hubs, they help maintain your TRX-4M’s performance on any trail. Features: Includes 4 wheel hub hexes 7mm size for a secure wheel fit Durable construction for long-lasting performance Direct factory replacement for quick and easy installation Genuine Traxxas part for guaranteed quality and fit Compatibility: Traxxas TRX-4M 1/18 Scale Crawler (all versions: Bronco, Defender, etc.) Includes: (4) 7mm Wheel Hub Hexes Part Number: 9750X

Read more less

Licensed Scale Tires for 1/18 TRX-4M Tackle any terrain with the aggressive look and performance of Mickey Thompson® Baja Pro X® 2.2x1.0" tires—now in 1/18 scale for your TRX-4M. These officially licensed tires feature an authentic tread pattern and soft rubber compound, providing excellent grip on rocks, dirt, and trail obstacles. Perfect for scale builds and high-performance crawling. Features:• Officially licensed Mickey Thompson® Baja Pro X® tread design• 2.2x1.0" size optimized for TRX-4M• Soft compound for enhanced traction• Durable rubber construction for long-lasting performance• Ideal for trail running and scale crawling Includes:• (2) Mickey Thompson® Baja Pro X® 2.2x1.0" TiresPart Number: 9782 Scale realism meets trail-ready grip—upgrade your TRX-4M with true off-road attitude.

Read more less

🧗♂️ Stick, Climb & Conquer Every Trail! Give your micro crawler unstoppable traction with the INJORA 1.0" Cling On Tires. Built from the ultra-sticky S5 Super Soft Compound, these tires deliver next-level grip and control on rock, dirt, and uneven terrain. At 64 mm tall and 24 mm wide, they strike the perfect balance between ground clearance and sidewall flex for ultimate crawl performance. ⚡ Features: 🧲 Super Soft S5 Compound for maximum traction and flexibility 🏔️ Aggressive tread pattern bites hard on all surfaces 🔁 Consistent, long-lasting performance in any terrain ⚙️ Perfect fit for 1/18 & 1/24 scale crawlers 🧩 Compatible with INJORA Silicone Rubber Inserts (#1062) 📏 Specifications: Part Number: T1020 Compound: S5 Super Soft & Sticky Outer Diameter: 64 mm Width: 24 mm Weight: 15 g (each) 📦 Includes: (4) INJORA 1.0" Cling On Tires 🔧 Compatibility: Axial SCX24 FMS FCX24 Traxxas TRX-4M Other 1/18 & 1/24 RC crawlers using 1.0" wheels 💡 Pro Tip:Pair these with INJORA 1.0" beadlock wheels and Silicone Inserts (#1062) for the ultimate micro-crawler setup — maximum grip + super realistic sidewall behavior.  

Read more less

  Lower the Weight. Raise the Performance. Transform your TRX-4M’s crawling stability with the Traxxas 1.0" Micro Brass Wheel Weights. Designed to add 31 grams of low-mounted mass, these precision-machined brass weights help keep your crawler’s center of gravity as low as possible — delivering enhanced traction, smoother climbs, and improved control on technical terrain. Built for Better Balance By increasing weight directly at the wheels, these micro brass weights reduce tipping and improve tire contact on uneven rock surfaces. Perfect for performance-focused drivers, they’re one of the simplest and most effective upgrades for boosting TRX-4M off-road capability. Features: Precision-machined brass construction adds 31 g total Lowers the center of gravity for improved crawling stability Improves traction and steering balance on steep terrain Fits 1.0" wheels for perfect alignment and easy installation Direct-fit factory upgrade — no modifications required Genuine Traxxas performance accessory Includes: (2) 1.0" Micro Brass Wheel Weights (31 g total) Compatibility: Traxxas TRX-4M Traxxas Tough — Add Brass. Crawl Better.

Read more less

🔥 Lightweight Look, Heavyweight Performance! Bring strength, stability, and style to your micro crawler with the INJORA 1.0" ModuWheel Brass & Aluminum Beadlock Wheels. These precision-machined modular wheels combine aluminum faces with brass rings for improved low-center weight, a wider stance, and head-turning looks. Available in six bold face colors, they deliver both form and function for your SCX24, FCX24, or TRX-4M build. ⚡ Features: 🛠️ CNC-machined brass & aluminum construction for precision and strength 🔄 Modular replaceable wheel faces allow quick style changes 📏 Negative offset (-4.4 mm) for wider stance and better stability 🎨 Available Colors: Black, Gray, Silver, Gold, Purple, Blue 🧲 1.0" beadlock design for secure tire mounting — no glue needed ⚖️ Brass inner rings add low-mounted weight for improved climbing balance 📏 Specifications: Part Number: MW1016 Material: Brass & Aluminum Negative Offset: -4.4 mm Outer Diameter: 28 mm Width: 15.4 mm Wheel Hub Depth: 7 mm Weight: 21 g each 📦 Includes: (4) INJORA 1.0" ModuWheel Brass & Aluminum Beadlock Wheels 🔧 Compatibility: Axial SCX24 FMS FCX24 Traxxas TRX-4M Other 1/18 & 1/24 RC crawlers using 1.0" wheels 💡 Pro Tip:Pair these wheels with INJORA T1020 Cling On Tires and INJORA Silicone Inserts #1062 for elite traction and performance on any terrain — perfect balance of style and control.  

Read more less

⚙️ Precision Gearing for Power, Speed & Control Fine-tune your 1/18 TRX4M’s performance with the INJORA Stainless Steel Transmission Gear Set, engineered for maximum strength and customizable drive ratios. Whether you’re after extreme torque for rock crawling or faster wheel speed for trail runs, this complete set delivers the perfect balance of performance, durability, and precision. ⚡ Features: 🔩 CNC-machined stainless steel gears for long-lasting durability 🧭 Multiple gear ratios for custom underdrive or overdrive setups 💪 Ultra-low 40.3:1 reduction gives unstoppable torque for technical climbing ⚙️ Includes 11T motor pinion — ready to install and tune 🧴 Pro Tip: Don’t forget to grease the gears before installation for smooth operation and longer life 📏 Specifications: Part Number: 4M-36 Material: Stainless Steel Reduction Ratios: 40.3:1 → Extreme Underdrive (≈ -59%) 24.4:1 → Moderate Underdrive (≈ -32%) 16.61:1 → Stock Ratio 9.7:1 → Overdrive (≈ +71%) Motor Pinion: 11T Weight: 15g (0.53oz) 📦 Includes: (1) Complete Transmission Gear Set (1) 11T Motor Pinion 🔧 Compatibility: 1/18 Traxxas TRX4M (Defender, Bronco, K10, F-150) INJORA 370 Transmission 💡 Pro Tip:Run the 40.3:1 set for low-end torque and precise control on steep climbs, or the 9.7:1 overdrive for high-speed trail performance. Keep multiple sets in your pit to swap for any terrain.  

Read more less

Treal Hobby Type K 1.0" 12-Hole Beadlock Classic Vintage Wagon Wheels (Black, Bronze, Grey, Silver) (4) – 28.9g Each Give your micro crawler that scale vintage flair with Treal Hobby's Type K 1.0" Classic Wagon Wheels. These beadlock rims are CNC machined from aluminum and feature interchangeable brass center rings for added weight and realism. Each set adds a total of 115.6g of unsprung weight down low—improving traction, crawling stability, and overall performance. Offered in four sleek finishes—Black, Bronze, Grey, and Silver—these wheels let you customize your rig’s style while maintaining premium durability and functionality. Features: Classic 12-hole vintage design Beadlock for easy mounting—no glue needed CNC-machined aluminum construction Brass center ring for added weight and balance Removable hex hub for offset tuning and customization Available in Black, Bronze, Grey, and Silver Adds 115.6g total weight (28.9g per wheel) Specifications: Application: 1/24 & 1/18 Micro Crawlers Outer Diameter: 1.22in (31mm) Wheel Diameter: 1.0in (25.4mm) Width: 0.5in (12.7mm) Hex Hub: 7mm (0.275in) Weight (each): 28.9g assembled Includes: (4) Type K 1.0" Beadlock Wheels in your choice of finish Brass center rings Removable hex hubs Upgrade your mini crawler’s looks and performance with the scale detail and rock-solid grip of Treal Hobby's Type K wheels.

Read more less

  Add Weight. Add Traction. Add Control. Upgrade your TRX-4M for superior crawling performance with the Traxxas Brass Differential Covers. Precision-machined from solid brass, these optional covers add low-mounted weight directly over the axles — improving stability, traction, and balance on steep climbs and technical trails. Trail-Tested Brass Performance These brass differential covers replace the stock composite versions, providing enhanced durability and a lower center of gravity without altering your crawler’s geometry. The added weight helps keep your tires planted and your truck steady, making this a must-have upgrade for any serious TRX-4M crawler. Features: Machined brass construction adds valuable weight low on the chassis Improves traction, stability, and climbing performance Direct-fit design — simple installation, no modifications needed Durable finish resists corrosion and wear Genuine Traxxas factory upgrade part Includes: (2) Brass Differential Covers (8) 1.6×12 mm Button Head Screws Compatibility: Traxxas TRX-4M Traxxas TRX-4MT Traxxas Tough — Brass-Built for Better Crawling.

Read more less

Traxxas TRX-4M Low Range Transmission Gear Set – Part #9776R🐢 Precision Crawling Power. Upgrade your TRX-4M with this Low Range Transmission Gear Set featuring a 40.3:1 reduction ratio. Designed for ultimate torque and slow-speed control, this setup is ideal for serious crawling and technical trail driving. ✅ 40.3:1 gear reduction for ultra-low speed crawling✅ Perfect for scale realism and obstacle control✅ Includes 11-tooth pinion gear✅ Drop-in fit for all TRX-4M models✅ Genuine Traxxas performance and durability 📦 Includes: (1) Low Range Transmission Gear Set (1) 11T Pinion Gear 💡 Pro Tip: Pair with high-torque servos and weighted wheels for the ultimate crawling setup.

Read more less

⚙️ Ultimate Torque. Total Control. Boost your TRX4M’s crawling power with the INJORA CNC Aluminum Complete Transmission, pre-assembled and precision-machined for maximum strength and performance. Featuring the 40.3:1 underdrive gear ratio, this transmission delivers extreme torque and smooth throttle response — perfect for technical rock crawling and slow-speed control. ⚡ Features: 🧱 Pre-assembled and ready to install 💪 High-torque 40.3:1 underdrive gearing for maximum low-end power (≈ -59%) ⚙️ CNC-machined aluminum housing for strength and durability 🖤 Black anodized finish for a clean, factory look 🧩 Direct bolt-on fit for the TRX4M — no modification required 📏 Specifications: Part Number: 4M-55UD-BK Material: CNC Aluminum Color: Black Internal Ratio: 40.3 : 1 (Underdrive 59%) Weight: 32 g (1.13 oz) 📦 Includes: (1) Pre-assembled INJORA CNC Aluminum Complete Transmission 🔧 Compatibility: 1/18 Traxxas TRX4M (Defender / Bronco / K10 / F-150) 💡 Pro Tip:Pair this with INJORA brass links and weighted wheels for unstoppable torque, precise control, and better stability on steep climbs.  

Read more less

The HobbyPlus CR-18P Terranaut 8×8 is a mission-ready recovery and hauling rig built on one of the most capable micro crawler platforms ever made. With Active All-Wheel Steering, a remote-operated 2-speed transmission, portal axles, and a fully functional recovery winch, this 1/18 utility crawler delivers an unmatched mix of realism, capability, and control. Whether you're navigating technical rock sections, hauling scale trailers, performing recovery missions, or just trail-running with friends, the Terranaut does it all — with style and precision. Key Features Active All-Wheel Steering (Active-AWS)Fully proportional front + rear steering with independent control. Perform: Tight U-turns Crab walking Front-only or rear-only steering Full coordinated or counter-steer modes 2-Speed Transmission (Remote Operated) Low Gear (124:1): Maximum torque for crawling, recovery, and technical driving High Gear (31:1): Trail-speed cruising Functional Recovery WinchStainless steel cable + metal hookRemote-controlled operation for real recovery missions Extreme Scale HardbodyInjection-molded body, interior details, dual spares, accessories, and tilt-cab for instant battery access Remote-Controlled LED Lighting5 lighting modes + high-visibility rotating amber beacons Gooseneck / Fifth-Wheel Trailer HitchReady for hauling and towing Full-Metal Gear DrivetrainUpgraded for durability and long-term reliability Portal AxlesIncreased ground clearance and tunable ratios Aluminum ChassisBlack-anodized rails with chamfered edges + laser-etched HB logo High-Quality SuspensionBig-bore oil-filled shocks with threaded bodies Performance Steering SystemServo-on-axle steeringMetal-gear servos on all four axlesCVDs for strength and increased steering angle Electronics & Radio System FlySky 6-channel transmitter Proportional rear-steer thumb lever Smooth FlySky ESC/receiver combo Big-block 280-size brushed motor Water-resistant electronics Battery & ChargingIncludes 2S 7.4V 1100mAh LiPoRuntime: up to 1 hourUSB charger included Why the Terranaut 8×8 Stands Out The Terranaut isn’t just another crawler — it's a purpose-built multi-utility machine. With eight driven wheels, eight independently steerable wheels, a functional winch, scale towing capability, and a full hardbody, it delivers a level of realism and versatility rarely seen in the micro-scale category. From recovery missions to scale adventures, the Terranaut 8×8 offers absolute control, incredible torque, and head-turning detail. Includes (1) HobbyPlus CR-18P Terranaut 8×8 RTR (1) FlySky 6-channel radio system (1) 2S 7.4V 1100mAh LiPo battery (1) USB charger Preinstalled winch, LEDs, and electronics Needed to Complete Nothing — Ready to Run    

Read more less

⚙️ Built Tough. Tuned Precise. Ready for Anything. Upgrade your TRX4M drivetrain with INJORA Black Hardened Steel Drive Shafts, precision-machined for strength, accuracy, and a tight, vibration-free fit. Designed specifically for the 1/18 TRX4M Defender and Bronco, these shafts feature D-shaped and rounded rectangle holes for a more secure connection, plus correct in-phase design for smooth power delivery. ⚡ Features: 🔩 CNC-machined hardened steel for maximum durability and torque resistance 🧩 In-phase design ensures smooth and balanced power transfer 🔒 D-shaped and rounded rectangle holes create a tighter, more reliable connection 🪶 Enhanced structure for extended lifespan and superior drivetrain stability 🖤 Black-coated finish with etched INJORA logo for premium style and protection 🧠 True-to-scale joint and spline design maintains a realistic crawler appearance 📏 Specifications: Part Number: 4M-50BK Material: Hardened Steel Color: Black Weight: 22 g (0.78 oz) 📦 Includes: (2) Hardened Steel Drive Shafts (4) Mounting Screws 🔧 Compatibility: 1/18 Traxxas TRX4M Defender 1/18 Traxxas TRX4M Bronco 💡 Pro Tip:Pair these with INJORA stainless or brass link kits to maximize driveline durability and reduce flex when tackling extreme terrain.

Read more less

🛞 Roll Smoother. Last Longer. Perform Better. Upgrade your Traxxas TRX4M with the INJORA 22PCS Steel Sealed Bearing Kit, engineered for smoother operation, reduced friction, and longer-lasting drivetrain performance. This complete set replaces every stock bushing on your rig with precision stainless steel bearings, keeping your crawler running quietly, efficiently, and dust-free. ⚡ Features: 🔒 Fully sealed and dustproof — protects against dirt and debris 🧭 Replaces all stock bushings for smoother, more efficient drivetrain performance ⚙️ High-precision stainless steel construction for durability and reliability 🪶 Low-friction design improves throttle response and overall control 🧰 Complete 22-piece kit includes every bearing needed for front, rear, and transmission assemblies 📏 Specifications: Part Number: 4M-03 Material: Stainless Steel Bearing Types (22 Total): Front Axle:(2) 3x6x2.5mm(2) 3.5x7x2.5mm(2) 4x8x3mm(2) 5x8x2.5mm(2) 8x12x3.5mm Rear Axle:(2) 3.5x7x2.5mm(2) 4x8x3mm(2) 5x8x2.5mm Transmission:(6) 3x6x2.5mm 📦 Includes: (22) Sealed Stainless Steel Bearings Organized and ready for direct installation 🔧 Compatibility: 1/18 Traxxas TRX4M (Defender / Bronco / High Trail / K10 / F-150) 💡 Pro Tip:Pair these with INJORA’s complete aluminum transmission or driveshaft set to reduce drivetrain drag and extend component life — a must for smooth, efficient crawling.  

Read more less

🪨 Conquer Any Terrain with Realistic Grip and Scale Style! Built for serious crawling and realistic performance, the INJORA 1.3" Rock Crawling Tires deliver unbeatable traction, flexibility, and scale looks. Featuring the ultra-sticky S5 Super Soft Compound, stepped tread blocks, and precision sipes, these tires maximize grip while maintaining consistent, predictable performance on rock, dirt, or trail. Perfect for your 1/18 or 1/24 micro crawler build. ⚡ Features: 🏔️ Incredible scale detail with realistic sidewall and tread design 🧲 Made from Super Soft & Sticky INJORA S5 compound for extreme traction ⚙️ Stepped tread blocks and multi-siped lugs for unmatched crawling grip 💪 Long-lasting durability and consistent performance over time 🧩 Compatible with INJORA Silicone Rubber Inserts (#1370) for ideal tire support 📏 Specifications: Part Number: T1311 Compound: S5 (Super Soft & Sticky) Outer Diameter: 70 mm Width: 26 mm Weight: 21 g (each) 📦 Includes: (4) INJORA 1.3" Rock Crawling Tires 🔧 Compatibility: Axial SCX24 FMS FCX24 Traxxas TRX-4M Other 1/18 & 1/24 scale RC crawlers using 1.3" wheels 💡 Pro Tip:Pair with INJORA 1.3" Beadlock Wheels and Rubber Inserts (#1370) for maximum contact patch, realistic sidewall flex, and ultimate micro-crawler performance.  

Read more less

Take your micro crawler to the next level with the UpGrade RC Micro Razor Wire XL 1.0" Class 2 Extreme Performance Tires — engineered for maximum grip, control, and climbing ability. Built for serious competitors, these tires deliver unstoppable traction and precision handling across the toughest terrain. ✅ Aggressive Open-Lug Tread – Alternating lug pattern bites deep into loose dirt, gravel, and rock✅ Self-Cleaning Design – Open center lugs clear debris for consistent traction✅ Super Soft Compound – Conforms to terrain for enhanced crawling performance✅ Trail & Comp Ready – Ideal for Class 2 micro crawlers seeking ultimate capability✅ Side Lug Reinforcement – Improves sidehill stability and off-camber control✅ Pre-Installed Foam Inserts – Soft inserts ensure even contact and balanced support Specifications: Outer Diameter: 2.51" (64mm) Inner Diameter: 1.0" (25.4mm) Width: 0.89" (22.77mm) Includes: (2) UpGrade RC Razor Wire XL 1.0" Tires (2) Pre-Installed Soft Foam Inserts Compatibility: Axial SCX24 Furitek Cayman Furitek Cayman Pro Furitek FX118 HPI Venture 18 HobbyPlus CR-18 Losi Micro Rock Crawler Redcat Ascent-18 Traxxas TRX-4M ⚡ Bigger lugs. Bigger bite. The Razor Wire XL is the Class 2 crawler tire built to dominate the roughest terrain.

Read more less

Unleash the full potential of your TRX-4M with the Traxxas 6250 Brushless FOC Power System Combo! This powerful upgrade delivers up to 50% more speed and performance than the stock brushed system, all while maintaining low-speed control and crawling precision with Field-Oriented Control (FOC) technology. The 3350kV brushless outrunner motor and waterproof ECM install easily with no mods—just plug and play. Fully compatible with Traxxas TQ and TQi transmitters and 2S TRX-4M iD® LiPo batteries. Pro Scale® lighting and three selectable drive modes (Sport, Trail, Crawl) are all retained. Features:• Powerful 3350kV brushless outrunner motor• Field-Oriented Control (FOC) for incredible torque and control• Plug-and-play installation using original ECM mounts• Retains Pro Scale® lighting and 3 drive modes• Waterproof ECM with integrated 3-channel receiver• Compatible with 2S TRX-4M iD® LiPo batteries• Includes 11-tooth brass pinion gear• Works with TQ and TQi transmitters Includes:• (1) TRX-4M Brushless FOC Power System ComboPart Number: 6250 Take your TRX-4M from fun to fierce—with the brushless upgrade that redefines control and performance.

Read more less

Traxxas TRX-4M Roll Bar LED Light Harness – Part #9863💡 Light It Up. Add Night-Crawling Style. Designed to fit the TRX-4M Chrome Roll Bar (#9862), this LED light harness brings your mini rig to life with bright, functional lighting. Whether you're hitting the trails after dark or just boosting your scale looks, this is the perfect finishing touch. ✅ Specifically fits Traxxas TRX-4M Roll Bar (#9862)✅ Pre-wired LED harness for quick and easy install✅ Adds extra visibility and scale realism✅ Genuine Traxxas quality and compatibility 📦 Includes: (1) LED Light Wire Harness

Read more less

Take your scale crawling to the next level with the Traxxas Pro Scale Winch Kit — a fully functional, high-strength winch system designed for the TRX-4 and TRX-6 platforms. With a 10-pound pulling capacity, metal hook, long reinforced winch line, and a wireless 2-channel remote, this winch doesn’t just look realistic… it performs. Perfect for scale recovery, technical trails, and rescuing your buddy’s rig, the Pro Scale Winch adds real utility and unmatched realism to any crawler setup. Features: ✔️ 10-lb pulling power for real recovery performance✔️ Wireless 2-channel remote — operate front & rear winches independently✔️ Free-spool button for fast manual line extraction✔️ Over 4 feet of high-strength reinforced line with a steel hook✔️ Automatic brake holds your vehicle securely on inclines✔️ Waterproof winch and remote electronics✔️ Direct battery connection via XL-5 HV accessory plug (no RX load)✔️ Drops into TRX-4 / TRX-6 winch-compatible bumpers✔️ Simple single-wire installation — no receiver access required✔️ Compatible with all Traxxas TRX-4 and TRX-6 models(No accessory bumper required for TRX-4 2021 Bronco #92076-4) Includes: (1) Remote-operated Pro Scale Winch Reinforced winch line Heavy-duty steel hook Fabric hook strap (1) Fob-style 2-channel wireless remote Line retainer, hardware & instructions Reinforced structure with triangulated ribs Smooth underside for reduced drag Exceptional balance for high-speed racing and rough terrain This chassis layout transforms handling, making the truck more planted and predictable through corners and over jumps. Electronics – Velineon Brushless Power + TSM The Ultimate features Traxxas’ proven brushless system: Velineon 3500 Brushless Motor VXL-3s Waterproof ESC (2–3S LiPo capable) TSM® Traxxas Stability Management for improved control on loose or slick surfaces Factory-installed telemetry sensors for real-time speed, temperature, and voltage TQi 2.4GHz Radio w/ Wireless Link Module The result: explosive acceleration, 60+ mph potential (with 3S), and professional-grade control in any conditions. Drivetrain & Suspension – Built to Handle Real Power The Slash 4X4 Ultimate is packed with premium upgrades normally purchased separately: Heavy-Duty Driveshafts Aluminum C-hubs, steering blocks & rear hubs Front & Rear sway bars (installed) Precision steel turnbuckles GTR PTFE-coated aluminum shocks with Ti-Ni shafts This reinforced system is engineered to harness the Velineon system’s power while providing smooth, predictable suspension response over high-speed off-road terrain. Features: ✔ Fully assembled Ready-To-Race®✔ Clipless race-style body mounting system✔ 2S–3S Velineon brushless system (waterproof)✔ TSM® stability control✔ Heavy-duty driveshafts & aluminum hub components✔ GTR aluminum shocks with PTFE coating✔ Installed sway bars for race-tuned handling✔ Built-in telemetry sensors for use with Traxxas Link✔ TQi 2.4GHz radio with Wireless Link module Includes: (1) Traxxas Slash 4X4 “Ultimate” VXL Brushless RTR (1) TQi 2.4GHz Radio System (with Wireless Link) Installed telemetry sensors Needed To Complete: (1) 2S–3S LiPo Battery w/ Traxxas iD connector (1) Compatible Traxxas iD Charger (4) AA batteries for transmitter Specifications: Scale 1/10 Short Course Length 22.4 in (568 mm) Width 11.65 in (296 mm) Height 7.6 in (193 mm) Wheelbase 12.75 in (324 mm) Weight 80.4 oz (2.28 kg) Drive 4WD Shaft-Driven Gear Pitch 32P Drive Ratio 11.82:1 (stock) Battery Compatibility 2S–3S LiPo Completion Level RTR

Read more less