Power up your ride with serious runtime and punch! The Traxxas Power Cell 7600mAh 2S LiPo delivers high-capacity performance with rugged construction and easy plug-and-go charging through the Traxxas iD system. 🔋 7.4V / 7600mAh / 25C Continuous🔌 iD Connector for safe, simple charging🔥 Max Burst Rate: 50C (380A)⚡ Maxx Cable 12AWG wiring for low resistance🏁 Optimized fit for Traxxas models like Slash & Slash 4x4💡 Semi-rigid construction – no hard case needed Dimensions: 155x27x43mmWeight: 390g ⚠️ Note: Must be charged with a Traxxas iD charger only. The go-to battery for racers and bashers who want dependable power, long runtimes, and Traxxas factory fit and finish.  

Read more less

Oil, shock (60 wt, 700 cSt, 60cc) (silicone)

Read more less

Traxxas Titan 550 Size Motor (12T) – Part #3785🔥 Big Power. Bold Performance. The Traxxas Titan 12T 550 Brushed Motor delivers massive torque and reliable performance for your RC adventures. Whether you're tearing up trails or bashing in the backyard, this motor is built to handle the heat—literally—with an integrated cooling fan that helps extend run times and reduce wear. A perfect drop-in replacement for Traxxas models using a 12-turn brushed motor. ✅ High-torque 550 size brushed motor✅ 12-turn design for powerful acceleration✅ Built-in cooling fan for longer run times✅ Factory-installed leads for easy installation✅ Ideal replacement for many Traxxas 1/10 scale vehicles 📦 Includes: (1) Titan 550 12T Brushed Motor 💡 Pro Tip: For best results, pair with the Traxxas XL-5 ESC and a properly geared transmission to balance speed and runtime.  

Read more less

Get the performance and reliability you expect from Traxxas with the 5800mAh Power Cell 2S LiPo—a perfect balance of power, runtime, and safety for your Traxxas vehicle. 🔋 7.4V / 5800mAh / 25C Continuous Discharge🔌 Exclusive Traxxas iD Connector for simple, safe charging⚡ Max Burst Rate: 50C (290A)💪 Hard-wired 12AWG Maxx Cable for low resistance🏁 Designed for a perfect fit in Traxxas vehicles Dimensions: 137x25x43mmWeight: 308g ⚠️ Requires Traxxas iD charger only. Do not charge with any non-Traxxas charger. Boost your bash time with dependable power, rugged construction, and high-output delivery—Traxxas style.

Read more less

Traxxas Steering Blocks (2) – VXLPart #: 3736 Keep your front end running strong with these genuine Traxxas replacement steering blocks. Designed to fit Traxxas 2WD vehicles, including VXL models, these steering blocks mount to the front uprights and support the front axles for smooth, responsive steering. Features: Durable OEM replacement parts Supports front axle for precise steering Compatible with Traxxas 2WD models like Rustler, Stampede, and Slash Direct fit – no modifications required Includes: (2) Steering Blocks

Read more less

Keep your rear suspension solid with these replacement stub axle carriers from Traxxas! Designed for VXL models, these carriers mount directly to the rear suspension arms and provide critical support for your axle stubs. 🔧 OEM-quality replacement🔧 Fits Traxxas VXL models🔧 Easy install – bolt-on compatibility Includes: 2x Stub Axle CarriersPart Number: 3752 Perfect for getting your Traxxas ride back in action or keeping a spare set on hand!    

Read more less

Traxxas 5x11x4mm Ball Bearings (2) – Part 5116Smooth Operation. Built to Last. The Traxxas 5x11x4mm Ball Bearings are a direct replacement for worn-out or damaged bearings in a variety of Traxxas vehicles. Designed for low-friction rotation and long-lasting performance, these bearings are perfect for keeping your drivetrain, hubs, or transmission running like new. ✅ Includes 2 ball bearings✅ Size: 5x11x4mm – fits many Traxxas applications✅ Precision construction – reduces rolling resistance and wear✅ Great for wheels, transmissions, and steering systems✅ OEM replacement quality – trusted fit and durability 📦 Includes: (2) 5x11x4mm Ball Bearings Part #: 5116 💡 Pro Tip: Replace bearings in pairs for balanced performance and reduced vibration.

Read more less

Tougher. Stronger. Built to Bash.The Traxxas 6852X Heavy Duty Rear Driveshaft Assembly is the perfect upgrade or replacement for your Stampede 4X4. Engineered for high-torque brushless power systems, this driveshaft is built to handle extreme terrain and aggressive driving. With factory-assembled convenience, this heavy-duty shaft delivers maximum durability and performance right out of the package—no extra tools or parts required. Features: Designed for high-strength and long-lasting performance Compatible with Traxxas Stampede 4X4 (rear, left or right) Pre-assembled and ready to install Handles powerful brushless setups with ease Includes: (1) Fully Assembled Rear Heavy Duty Driveshaft Beef up your drivetrain and get back to doing what your Stampede 4X4 was made for—conquering everything in its path.

Read more less

Ready to bash. Built to last.Keep your Traxxas Rustler® 4X4 running strong with the Rear Extreme Heavy Duty Driveshaft Assembly (6852A) — the factory-assembled replacement that delivers serious strength and performance. Designed to handle the torque and punishment of extreme off-road driving, this driveshaft ensures smooth, consistent power delivery every time you hit the throttle. Factory Fit. Heavy Duty Performance.Each assembly comes pre-built and ready to install on either side of the rear chassis. The high-strength materials and precision construction make it perfect for high-power brushless systems and rough terrain use. Includes a screw pin for a quick, secure installation. 💪 Features: Genuine Traxxas heavy-duty replacement part Handles high torque and rough terrain with ease Factory-assembled for quick, hassle-free installation Fits left or right side of the rear chassis Includes screw pin for secure mounting 📦 Includes: (1) Pre-Assembled Rear Driveshaft (1) Screw Pin ✅ Compatibility: Traxxas Rustler® 4X4 Traxxas Stampede® 4X4  

Read more less

Oil, shock (30 wt, 350 cSt, 60cc) (silicone)

Read more less

Overview:Charge two batteries at once with the Traxxas EZ-Peak Dual 8-Amp Charger. Delivering up to 100 watts (8 amps) of charging power per side, this smart charger is designed to keep you running longer with less downtime. With Traxxas iD technology, charging is simple—just plug in any Traxxas iD battery and the charger automatically detects type, cell count, and capacity, then configures settings for a safe, optimized charge. Perfect for NiMH and LiPo packs, the EZ-Peak Dual includes advanced safety features, balance charging for LiPos, and intuitive LED indicators to keep you fully informed while charging. Features: Dual charging ports – charge two batteries at once 100W, 8A output per channel for fast charging Traxxas iD Auto-Battery Identification simplifies setup Compatible with NiMH and LiPo Traxxas iD batteries Advanced balance charging for LiPo packs LED status indicators for easy monitoring Built-in safety features for worry-free charging Compatibility: Charges all Traxxas iD-equipped batteries (NiMH and LiPo) Compatible with 5-8 cell NiMH and 2S–4S LiPo iD packs Works with popular Traxxas models including Slash, Rustler, Stampede, E-Revo, X-Maxx, and more Includes: (1) EZ-Peak Dual 8-Amp Charger Part Number: 2972

Read more less

Traxxas 54T Spur Gear – 0.8 Mod Metric Pitch – Part 3956Factory Fit. Smooth Mesh. Built to Perform. The Traxxas 54-Tooth Spur Gear (3956) is a direct replacement part designed to mount on the transmission input shaft, meshing with your pinion gear to deliver reliable, consistent power transfer in demanding driving conditions. ✅ 54-tooth gear – standard gearing for balanced speed and torque✅ 0.8 Metric Pitch – matches with Mod 0.8 / 32-pitch pinion gears✅ Durable molded construction – designed for long-lasting performance✅ Fits Traxxas vehicles using 0.8MP spur setups✅ Mounts to input shaft, meshes with clutch bell pinion 📦 Includes: (1) 54T Spur Gear (0.8 Metric Pitch) Part #: 3956 💡 Pro Tip: Use threadlock when re-installing your spur gear screws to prevent backing out under vibration.

Read more less

Traxxas 12mm Hex Stub Axle Pin & Collar Set Part #: 1654 | Replacement Wheel Hub Set The Traxxas 1654 Stub Axle Pin & Collar Set is a direct replacement for worn or lost hex hubs and axle pins on a wide range of Traxxas vehicles. This kit includes two 12mm hex wheel hubs and four axle pins, ensuring a secure fit for your wheels and reliable power transfer to the ground. 📦 Includes: (2) 12mm Hex Wheel Hubs (4) Stub Axle Pins ✅ Compatibility: Fits most Traxxas 1/10 scale vehicles with 12mm hexes Commonly used in Slash, Rustler, Stampede, and others Always refer to your model’s manual to confirm compatibility.

Read more less

Traxxas 48P Spur Gear (86T)Part #: 4686 Fine-tune your gearing with this optional 48-pitch, 86-tooth spur gear from Traxxas. Whether you're looking to optimize for more torque or higher top-end speed, this precision-molded gear delivers consistent performance and smooth power delivery. Features: Optional 48-pitch 86-tooth spur gear Ideal for adjusting gear ratios for better torque or speed Durable molded construction Genuine Traxxas quality and reliability Includes: (1) 86T 48P Spur Gear Note: Be sure to verify pitch compatibility with your pinion gear before installing.

Read more less

  Traxxas 83T Spur Gear – 48 Pitch – Part 4683Dial In the Perfect Gear Ratio. Built for Smooth Torque Control. The Traxxas 83-Tooth Spur Gear (Part 4683) is a high-precision replacement gear designed for models equipped with a Torque-Control slipper clutch. With fine 48-pitch teeth, it's perfect for smooth throttle response and gear ratio tuning in 1/10 scale vehicles. ✅ Tooth Count: 83T – ideal for high-acceleration gearing setups✅ Pitch: 48P – fine-tooth mesh for smooth and quiet operation✅ Designed for Torque-Control slipper clutch systems✅ Durable molded construction – reliable under brushless power✅ Fits a wide range of Traxxas 1/10 scale models 📦 Includes: (1) 83-Tooth 48P Spur Gear Part #: 4683 💡 Pro Tip: Pair with different 48P pinion sizes to fine-tune your speed vs. torque for your track or terrain.  

Read more less

Traxxas Front Extreme Heavy Duty Driveshaft – Rustler 4X4 – Part 6851ABeefed-Up Strength. Bolt-On Simplicity. The Traxxas 6851A Extreme Heavy Duty Front Driveshaft Assembly is built to handle high-power brushless setups and intense off-road abuse. Pre-assembled and ready to drop in, this driveshaft fits either the left or right front side of your Rustler 4X4. ✅ Fits front left or right side – fully interchangeable✅ Extreme Heavy Duty design – upgraded strength over stock✅ Fully assembled for fast installation✅ Ideal for high-torque applications and heavy bashing✅ Includes screw pin for secure mounting 📦 Includes: (1) Assembled Front Driveshaft (Left or Right) (1) Screw Pin Part #: 6851A Fits: Rustler 4X4 Rustler 4X4 VXL Also compatible with Slash 4X4, Stampede 4X4, and others using the Extreme HD upgrade system 💡 Pro Tip: Upgrade all four corners with Extreme HD shafts for a bulletproof driveline that’s ready for anything.

Read more less

Traxxas EZ-Peak® Plus Charger – 4A NiMH/LiPo w/ iD® Auto Battery Detection Fast, Safe, Smart Charging for Traxxas Batteries The Traxxas EZ-Peak® Plus 4-Amp Charger is the perfect solution for hobbyists looking for simplicity, speed, and safety. Featuring iD® Auto Battery Identification, this charger automatically configures the optimal charge settings for any Traxxas iD-equipped battery—just plug it in and press start! ⚙️ Features: ⚡ Charges 5–8 Cell NiMH or 2S–3S LiPo Traxxas iD® Batteries 🔍 iD® Auto Battery Detection – No settings to adjust or balance plugs to connect 🔒 Built-in Safety Features – Protects against overcharging and short circuits 🔥 4-Amp Fast Charging – Get back on the track quicker 🧠 Advanced High-Resolution Peak Detection – Ensures full, safe charging every time ✅ Simple One-Button Operation 🔌 Compatible Battery Types: NiMH: 5–8 cells (6.0V–9.6V) LiPo: 2S–3S (7.4V–11.1V)Traxxas iD®-equipped batteries only 📦 Includes: (1) Traxxas EZ-Peak® Plus 4A NiMH/LiPo Charger (2970) (1) Power cord Spend less time charging and more time driving—perfect for beginners and pros alike!

Read more less

Traxxas 2075X High Torque Waterproof Digital Servo – Metal GearPart #: 2075X Tough. Reliable. Ready for the Trail.Upgrade or replace with confidence using the Traxxas 2075X Digital High-Torque Servo. Featuring rugged all-metal gears, ball bearings, and full waterproof protection, this servo delivers the strength and durability you need to tackle any off-road challenge. Standard equipment in the TRX-4, the 2075X is built to handle trail abuse and extreme terrain while offering smooth, precise control. Features: 125 oz-in of torque for confident steering response .17 sec/60° transit time for quick inputs Digital circuitry for enhanced performance Ball bearing supported output for smoother operation Full metal geartrain for lasting strength Waterproof – built for wet trails, mud, and snow Factory fit for most 1/10 scale Traxxas vehicles Specifications: Length: 55mm Height: 42.75mm Width: 21.5mm Torque: 125 oz-in Speed: 0.17 sec/60° Gears: Metal Motor Type: Digital Bearings: Ball Bearing Waterproof: Yes Built for the trail. Trusted in the TRX-4.Whether you're upgrading or replacing, the 2075X delivers reliable strength for every terrain.  

Read more less

Traxxas Suspension Arms (Left & Right) – 3655Replacement Arms for Bigfoot®, 2WD Rustler®, and 2WD Stampede® Keep your suspension performing at its best with these genuine Traxxas replacement suspension arms. Designed as direct replacements for the Bigfoot®, Rustler® 2WD, and Stampede® 2WD, this set includes both the left and right arms for a quick and reliable fix. Features:• Direct replacement suspension arms• Fits Bigfoot®, Rustler® 2WD, and Stampede® 2WD• Durable molded construction built for off-road abuse• Includes both left and right arms Includes:• (1) Left Suspension Arm• (1) Right Suspension ArmPart Number: 3655 Get back on the track or trail with OEM strength and fit—built Traxxas tough.

Read more less

Traxxas 30° Caster Blocks (2) – PART 3632 Keep your suspension strong and steering responsive with this set of 30° caster blocks from Traxxas. Whether you're replacing worn parts or dialing in your setup, these precision-molded blocks are built tough to handle the rigors of high-speed off-road action. Features: Genuine Traxxas replacement part Designed for consistent steering geometry and durability 30° caster angle for balanced handling on a variety of surfaces Includes left and right side caster blocks Upgrade with confidence—perfect for restoring performance and getting back on track fast.

Read more less

Traxxas Big Bore Aluminum Shocks (Set of 4) – Slash – Part 5862Smooth Control. Built to Soak It All Up. Upgrade your Slash suspension with Traxxas Big Bore Shocks—engineered from hard-anodized, PTFE-coated T6 aluminum and built to take a beating while delivering ultra-smooth damping. Pre-assembled with Titanium Nitride (TiN) coated shafts and springs, this complete set is a race-ready solution for both front and rear. ✅ Full set of 4 shocks – front & rear included✅ T6 aluminum shock bodies – hard-anodized and PTFE-coated for smooth travel✅ TiN-coated shafts – reduce stiction and increase durability✅ Pre-assembled with springs installed – ready to bolt on✅ Increased oil volume & heat dissipation – consistent damping on long runs✅ Perfect upgrade for Traxxas Slash and similar models 📦 Includes: (2) Front Big Bore Shocks (assembled) (2) Rear Big Bore Shocks (assembled) Springs (installed) Part #: 5862 💡 Pro Tip: Pair with shock oil tuned for your track conditions to get the most out of these premium dampers.

Read more less

  Traxxas Heavy Duty Front Driveshaft AssemblyPart #: 6851X Upgrade or replace with confidence using this Heavy Duty Front Driveshaft Assembly from Traxxas. Designed for the Stampede 4x4, this driveshaft is a direct-fit replacement that comes fully assembled and ready to install. Built for durability and performance, it’s compatible with both the left and right sides of the chassis. Features: Heavy-duty construction for increased durability Pre-assembled for quick, hassle-free installation Fits left or right front of the Stampede 4x4 Genuine Traxxas part for factory reliability Vehicle Compatibility: Traxxas Stampede 4x4 Includes: (1) Heavy Duty Front Driveshaft Assembly  

Read more less

Oil, shock (70 wt, 900 cSt, 60cc) (silicone)

Read more less

Traxxas Link Wireless Module – Smart Control, Real-Time Data Unleash the full power of your Traxxas TQi radio with the Traxxas Link Wireless Module. Instantly connect your transmitter to the Traxxas Link™ app via Bluetooth and dial in your vehicle like never before. Whether you're chasing lap times or just want to geek out on data—this module turns your RC experience into something next level. Highlights:🔹 Real-time telemetry (speed, RPM, temps, voltage – with optional sensors)🔹 Live tuning on the fly – make changes while you're driving🔹 Intuitive, HD interface through the free Traxxas Link app🔹 Bluetooth wireless connection to iOS & Android🔹 Share data, log runs, or let your buddy co-drive remotely What’s In The Box: (1) Traxxas Link Wireless Module Compatible With: All Traxxas TQi Transmitters iOS 4.3+ & Android 4.4+ Optional Traxxas telemetry sensors  

Read more less

Traxxas Slash Pro-Built Complete DifferentialPart #: 2380 Get back on the track fast with this Pro-Built Complete Differential from Traxxas! Designed for the 2WD Slash, Rustler, Bandit, and Stampede, this drop-in replacement comes fully assembled and ready to install—no fuss, no hassle. Whether you're repairing after a race or building up a new basher, this factory-built differential delivers consistent performance with Traxxas quality you can trust. Fits: 2WD Slash Rustler Bandit Stampede Includes: (1) Fully Assembled Complete Differential Spend less time wrenching and more time ripping.  

Read more less

Traxxas Antenna Tube Kit (Blue) – Part #1726📡 Stay Tuned. Stay Connected. The Traxxas Antenna Tube Kit is a direct replacement for many Traxxas vehicles, including the legendary Revo. Designed to protect and organize your receiver antenna, this kit helps maintain strong, consistent radio signal during high-speed runs and rough terrain. Whether you're rebuilding or just refreshing your rig, this simple upgrade keeps things clean and dialed in. ✅ Compatible with Traxxas Revo and more✅ Helps prevent antenna wire damage and tangles✅ Blue tube with black end cap and secure tubing sleeve✅ Easy to install, race-ready durability 📦 Includes: (1) Blue Antenna Tube (1) Black Antenna Cap (1) Black Tubing Sleeve for wire management

Read more less

Oil, shock (20 wt, 200 cSt, 60cc) (silicone)

Read more less

Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)

Read more less

Traxxas Front Hex Wheel Hub (2) – Part #3654🔧 Keep Your Front End Dialed In. The Traxxas 3654 Front Hex Wheel Hubs are direct replacements for your worn or damaged originals. Designed for a precise factory fit, these hubs ensure your front wheels stay securely mounted and spinning true. Includes the necessary axle pins for a quick, hassle-free install. ✅ Includes two front hex hubs and two axle pins✅ Factory fit for Traxxas 2WD models✅ Keeps wheels aligned and properly secured✅ Easy to install – get back on track in minutes 📦 Includes: (2) Front Hex Wheel Hubs (2) Axle Pins 💡 Pro Tip: Always inspect your hubs and pins for wear—keeping them fresh ensures consistent handling and durability on race day.  

Read more less

  🛠️ Keep your suspension together and performing at its best. The Traxxas Shock Spring Retainer Set includes upper and lower retainers for two shocks, providing a secure fit for your springs and helping maintain proper suspension function. Made from durable molded material, these retainers are a direct replacement for worn or damaged parts. ✅ Genuine Traxxas replacement parts✅ Fits two complete shocks✅ Includes both upper & lower retainers✅ Durable molded construction 📦 Includes:• Upper & Lower Spring Retainers for (2) shocks  

Read more less

Traxxas Slash 4x4 Pro-Built Rear Differential – Part #6789🔧 No Wrenching. Just Winning. Get back on the track in no time with the Traxxas 6789 Pro-Built Rear Differential. This factory-assembled drop-in replacement is designed specifically for the Slash 4X4, giving you hassle-free installation and reliable performance—no gear setup or grease required. ✅ Fully assembled and ready to install✅ Perfect fit for Traxxas Slash 4X4 Short Course Trucks✅ OEM quality with factory precision✅ Ideal for quick repairs or spares 📦 Includes:(1) Pro-Built Rear Differential (assembled)

Read more less

Take your charging game to the next level with the most powerful and advanced charger in the Traxxas lineup. The EZ-Peak Live Dual iD Charger delivers over 26 amps and 200 watts of output power, with dual ports, iD-technology, Bluetooth connectivity, and advanced app features. Whether you're running 4S LiPos or NiMH packs, this charger is built to handle it all—and fast. 🔋 Key Features: ✅ Dual Charging Power: 200W total output (up to 26+ amps) ✅ iD® Battery Recognition: Automatically configures charge settings for Traxxas iD-equipped batteries ✅ MAXX Charge Mode: Prioritizes one battery to reach full charge even faster ✅ Storage Mode: Prepares your LiPos safely for long-term storage ✅ Balance Charging: Optimized LiPo balance charge for better cell health ✅ EZ-Peak Live App Support: Monitor, update, and customize charger settings via Bluetooth ✅ Dual Cooling Fans: Keeps internal temps down during extended sessions ✅ Dual Balance Ports: Supports older Traxxas batteries with external balance leads ✅ USB Output Port: 2A charging for mobile devices on the go ✅ Universal AC Input: Charges from any 100–240V outlet 📱 EZ-Peak Live App: Compatible with iOS and Android, the free app unlocks advanced functions: Monitor real-time charge progress Customize charge profiles Update firmware Control multiple EZ-Peak Live chargers at once Turn iD® mode on or off for legacy batteries 🔧 Specifications: Input Voltage: 100–240V AC, 50–60Hz Charge Current: 1.0–26.0A+ Battery Types: NiMH: 5–8 Cells (Dual) LiPo: 2S–4S (Dual) Balance Port Drain Rate: 750mAh USB Output: 2A Dimensions: 204 x 174 x 68mm 💡 Note: Some features require Bluetooth and the free EZ-Peak Live App on a compatible mobile device. 🚀 Get back to the action faster with smart, high-performance charging that just works. The EZ-Peak Live Dual is a must-have for serious Traxxas enthusiasts.

Read more less

  Haul More. Adventure Further. Expand your TRX-4M’s capability with the Traxxas Utility Trailer w/ Hitch, the ultimate 1/18-scale accessory for adding realism and function to your trail runs. Perfectly scaled and built tough, this trailer lets you haul gear, accessories, and scale cargo while keeping your crawler’s performance light and nimble. Scale Realism Meets Functionality The TRX-4M Utility Trailer is pre-assembled and ready to attach right out of the box with its quick-connect hitch system. Designed for rugged off-road durability, it features a well-balanced frame, realistic wheels, and robust construction that keeps your cargo stable no matter where your trail leads. Take customization even further with optional add-ons like the LED Light Kit (TRA9790) and Side Panels (TRA9798) — sold separately — to elevate both the look and functionality of your setup. Features: Detailed 1/18-scale realism with authentic trailer design Durable construction for rugged off-road use Quick and secure hitch attachment to your TRX-4M Balanced weight distribution for smooth towing Lightweight design keeps crawler performance unhindered Fully assembled and ready to attach Compatible with optional accessories: LED Light Kit (TRA9790) Utility Trailer Side Panels (TRA9798) 1/18 Overlander Rack (Scale By Chris) Includes: (1) TRX-4M Utility Trailer (1) Trailer Hitch (2) Rear Preload Shock Spacers (2) 2.5×8 mm Screws Compatibility: Traxxas TRX-4M (All models) Traxxas Tough — Tow It. Haul It. Trail It.

Read more less

Keep your RC gear dialed in with the Traxxas Tool Kit, your all-in-one solution for maintaining any Traxxas vehicle. This premium set includes 11 telescoping bits, a comfortable ratcheting handle, and a variety of nut drivers, hex drivers, screwdrivers, and a wrench—all neatly packed in a tough zippered carrying case. Perfect for pit work, home repairs, or travel! 🔧 Includes: Ratcheting handle with clear directional markings 5 Nut Drivers: 4mm, 5mm, 5.5mm, 7mm, 8mm 6 Hex Drivers: 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm 3 Phillips Screwdrivers: Sizes 00, 0, 1 3 Flat-Head Screwdrivers: Sizes 2, 3, 4 Open-Ended Wrench: 4mm & 8mm Zippered Pouch: Keeps tools organized and protected ✅ Telescoping design for hard-to-reach screws✅ Built for durability and convenience✅ A must-have for every Traxxas owner Ready to wrench? This is the kit you need.

Read more less

Key Features Fits the front and rear 2WD and 4x4 Traxxas Slash Latest generation V2 SC wide carcass for increased contact patch Super aggressive motocross style tread for longevity and superior traction M2 (medium) compound Soft, reusable and waterproof closed cell foam inserts Removable hexes allow easy wheel offset changes, or upgrade to 14mm, 17mm and 12mm ProTrac Offset Hexes Fits any of Pro-Line's 6x30 Removable Wheel Hexes The two most common 12mm offset hexes are included Wheels constructed of high-strength DuPont nylon Overview Pro-Line is proud to introduce a next-generation Short Course wheel design – the Raid 2.2”/3.0” Removable Hex Wheel for all Short Course Tires! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! Now you can with the new 6x30 Removable Hex system from Pro-Line. The wheels include a pair of 12mm Slash® 4x4 Front/Rear (Slash® 2wd Rear) hexes and a pair of 12mm Slash® 2wd Front hexes that fit the most popular trucks. Optional 14mm, 17mm and ProTrac™ offset 12mm hexes (6355-00) are available separately to fit your exact application. Wheel hexes can be easily replaced without needing to replace your glued tires (6354-00 Replacement Slash® Hexes)! Uses Pro-Line's unique 6x30 interlocking hex design that is secured to the wheel by six M3 screws that are spaced 30mm across. Needed to Complete Nothing What's in the box? (2) Pro-Line Badlands Tires (2) Raid 2.2"/3.0" Black 6x30mm Removable Hex SC Wheels (2) Closed Cell Inserts (2) 6x30 - 12mm Hex Adapters (Slash 4x4 F and R and Slash 2wd F) 2 pcs of each size (12) M3x12mm Socket Head Cap Screw Hardware

Read more less

  The Pro-Line Badlands MX43 Pro-Loc All Terrain Tire is the ultimate tire solution for X-MAXX owners. Pro-Line Badlands take the Motocross inspired tread and elevate the look a Bigger and Bolder knobby tread that matches modern MX tires. These tires have been developed from the ground up for extreme X-MAXX punishment with an all-new ultra-durable compound that prevents tire ballooning even at high speeds. Pro-Line X-MAXX Impulse Pro-Loc Black Wheels feature a ground breaking Bead-Loc design that allows users to change tires or foams when necessary without worrying about the tires coming out of the bead. Pro-Line’s proprietary Pro-Loc Technology brings this feature to life and creates an ultra-secure bond between Pro-Line’s Pro-Loc Tires and Pro-Line’s Impulse Pro-Loc Wheels. The reinforced Tire bead of Pro-Line’s Pro-Loc Tires fits into a uniquely shaped channel on the wheel and the bead-loc screws actually pass through the tire rubber before being pinched by the outer bead-loc ring to create the maximum possible mounting security. Features: Tires Incredible Traction on Any Surface Ultra-Durable and Anti-Ballooning Tire Compound Aggressive Motocross-Inspired Appearance Reinforced Tire Bead Proprietary Pro-Loc Technology for Secure Tire Mounting Pairs perfectly with Pro-Line’s Impulse Pro-Loc wheels for X-MAXX® Foam Inserts Included Made in the USA, since 1982 Wheels Ground Breaking Pro-Loc Mounting Technology Change Tires or Foams and Re-use the Wheels Tough, Blacked-out Impulse Wheel styling Extra Thick, Extremely Durable to Take Serious X-MAXX® Abuse Stone Gray Bead-Loc Rings Stand Out from the Crowd Pairs perfectly with Pro-Line’s Badlands MX43 Pro-Loc Tires Made in the USA, since 1982

Read more less