Sturdy steel arm mounts to replace stock or upgrade for more rigidity. 🔥 Key Features: Steel construction for higher strength and durability over composite options Set includes upper and lower arm mounts Precision-machined dimensions for perfect suspension geometry ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: Full arm mount set (steel) for both sides ⚠️ Tip:Check alignment and clearance during installation — steel mounts shift suspension stiffness and may require repositioning.

Read more less

All-in-one bevel drive assembly, built to give long-lasting drivetrain performance. 🔥 Key Features: Steel bevel gear, spur gear, shaft & outdrive included Built for durability under high stress OEM-grade replacement for rally / touring setups ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Bevel drive gear with integrated spur, shaft & outdrive ⚠️ Tip:Ensure correct backlash and mesh with your pinion when installing, and use high-quality grease for the bevel gear interface.

Read more less

Precision replacement or upgrade drive shafts for your rally or touring platform. 🔥 Key Features: Complete front + rear drive shaft set Hardened steel construction for strength and reliability Designed to exact OEM spec for smooth drivetrain operation ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (2) Front & Rear drive shafts (matched set) Grease spline areas lightly before install and check for straightness — bent shafts degrade handling and increase wear.

Read more less

Upgrade or refresh your differential drive system with this gear diff outdrive suitable for multiple LC Racing rally and touring platforms. 🔥 Key Features: Machined diff outdrive gear for long life Compatible with front or rear differential applications OEM spec replacement for PTG-2 / PTG-2R / PTG-2TC ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R LC Racing PTG-2TC (touring car variant) 📦 Includes: (1) Diff outdrive gear (single piece) ⚠️ Tip:Ensure proper mesh with pinion and ring gear. Re-grease or inspect diff before use after install.  

Read more less

Restore adjustability and precision with this steel turnbuckle set designed for the PTG-2 / PTG-2R rally platforms. 🔥 Key Features: Hardened steel construction for durability Full turnbuckle set for front/rear use Direct replacement for PTG-2 / PTG-2R OEM parts ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: Complete turnbuckle hardware set ⚠️ Tip:After installation, check for smooth rotation and correct thread pitch. Use thread lock sparingly on ends (not the center turnbuckle adjustment section).  

Read more less

This adjustable bevel drive assembly provides reliable power transfer to your drivetrain. 🔥 Key Features: Steel bevel gear, integrated shaft, and outdrive High strength for long life OEM spec replacement ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Bevel drive gear + shaft + outdrive ⚠️ Tip: Check for backlash and mesh clearance during install. Use proper grease or diff oil as needed.

Read more less

Replace or upgrade your front and rear gearboxes all at once with this complete set — great for overhaul builds. 🔥 Key Features: Includes both front and rear gearbox housings/assemblies Durable composite / alloy construction Designed for direct drop-in replacement ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Front gearbox (1) Rear gearbox ⚠️ Tip: Reuse or replace internal gear sets as needed, and grease before installation.

Read more less

Restore smooth suspension movement with this hinge pin & set screw kit — indispensable for maintenance or rebuilding. 🔥 Key Features: Hardened steel hinge pins + matching set screws OEM spec replacement kit Ensures proper suspension geometry and smooth arm movement ✅ Compatibility: LC Racing PTG-2  LC Racing PTG-2R  📦 Includes: Multiple hinge pins & set screws (full set for one vehicle) ⚠️ Tip: Check pins for bend during routine inspection; replace at first sign of wear to preserve handling.    

Read more less

Upgrade your chassis’s front-end geometry with this complete Steering Block + C-Hub + Upright set. Ideal for maintenance or performance tuning. 🔥 Key Features: Full composite set: steering block, C-hub, upright Factory replacement / upgrade piece Precision-molded for durability and fit ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R  📦 Includes: (2) Steering Blocks (2) C-Hubs (2) Uprights ⚠️ Tip: Check alignment, camber, and steering bind after install. Use threadlock on hardware in high-stress runs.  

Read more less

Keep your RC10TC8 running smooth and reliable with this genuine Team Associated replacement part. The 38T Differential Case is designed specifically for the RC10TC8 platform, ensuring precision fit and long-lasting performance. Perfect for maintaining your drivetrain and keeping you race-ready. Features: Official Team Associated replacement part Designed for the RC10TC8 platform Durable construction for smooth differential operation Includes: (1) Differential Case (38T)

Read more less

Restore factory handling or upgrade worn parts with the Rear Suspension Arms for Team Associated 1/10 scale buggies. These durable molded arms are built to withstand the demands of competitive racing while maintaining the precise geometry your vehicle needs for consistent lap times. 🔥 Key Features: Genuine Team Associated replacement part Molded composite construction for durability and flex balance Maintains factory suspension geometry for consistent handling Direct replacement for stock rear arms Designed for competitive off-road performance ✅ Compatibility: Touring Car (TC6.2, TC7.1, TC7.2, TC7.4)   📦 Includes: (1) Left Rear Suspension Arm (1) Right Rear Suspension Arm ⚠️ Tip:Check hinge pin holes and arm ends regularly—excessive wear can affect alignment and handling.

Read more less

Fine-tune your steering geometry with the 4° Caster Blocks from Team Associated. These precision-molded components set the front suspension caster angle, helping you balance steering response, stability, and cornering performance to match track conditions. 🔥 Key Features: 4° caster angle for balanced steering and stability Molded composite construction for durability and precision fit Direct replacement part for worn or damaged caster blocks Designed for race-proven suspension geometry Easy installation with factory hardware ✅ Compatibility: Team Associated TC7 OriginalTeam Associated TC7.1Team Associated TC7.2 📦 Includes: (1) Left Caster Block (4°) (1) Right Caster Block (4°) ⚠️ Tip:Changing caster affects corner entry and straight-line stability—less caster = more steering response, more caster = better stability.

Read more less

Keep your RC ride race-ready with this pack of Arrma 2.5x8mm Cap Head Screws. Designed as a direct replacement for stock hardware, these high-quality screws are a must-have for routine maintenance or repairs. 🔧 Features: ✅ Precision-made 2.5x8mm cap head screws✅ Ideal for replacing worn or stripped hardware✅ Durable steel construction for lasting performance 📦 Includes: (10) 2.5x8mm Cap Head Screws 🚗 Compatibility: • Arrma Granite Grom• Arrma Mojave Grom• Arrma Typhon Grom• Losi NASCAR

Read more less

Upgrade your touring car with the Team Associated 1.875" Titanium Turnbuckle Set. Precision-made from lightweight titanium, these turnbuckles reduce weight while delivering strength and durability for consistent, accurate adjustments. Features & Benefits: Lightweight titanium construction for improved performance High strength and corrosion resistance Precision threads for smooth, accurate tuning Clean silver finish for a factory look Compatibility: Designed for the Team Associated TC6.1 1/10 Touring Car Includes: (2) 1.875" Titanium Turnbuckles Perfect for racers looking to fine-tune suspension and steering with premium materials.  

Read more less