Team Associated 3.5x42mm Steel Turnbuckles. These are replacement steering and front camber link turnbuckles intended for the RC10B74.2 and B74.2D series of vehicles. Package includes two 3.5x42mm turnbuckles. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

The Team Associated RC10B74.1 Factory Team "Carbon" Side Rails are an optional upgrade for the Team Associated RC10B74 series models. These carbon fiber composite option parts are impregnated with rigid and light carbon fibers inside the injection molded material to create a lighter, more durable part with optimized rigidity to create the ultimate high performance composite part.Features: Lightweight: Approximately 12% weight savings over “hard” material. Extreme Rigidity: More predictable handling in high traction applications and increased vehicle stability in fast corners. Improved Durability: Significantly improved strength over “hard” option parts. COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated Factory Team RC10B6.4/B6.4D 3.5mm Titanium Turnbuckle Set. These are optional titanium turnbuckles intended for the Team Associated B6.4 and B6.4D platforms. Constructed from high quality titanium these offer increased durability over stock components. Package includes two titanium front camber links, two titanium rear camber links and two titanium steering links.. NOTE: 3.5mm Ballcups are required for installation (ASC92308). COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated RC10B74 HD Differential Outdrives. These are replacement outdrives intended for the RC10B74 and RC10B74D buggies. Package includes two outdrives. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Buggy Tires (2) — C4 Red (Soft Compound)Part #: 3090-C4 Dialed for Grip. Designed to Win. The Pro-Motion Viper 2.2" Low-Profile (LP) Rear Buggy Tire is built for next-level performance on high-traction carpet and turf tracks. The LP carcass reduces sidewall flex for improved stability, while the directional tread with tapered mini pins delivers smooth, predictable traction. C4 Red compound brings the extra softness needed for maximum bite in low-grip or cooler conditions. ✅ Low-profile design for reduced flex and razor-sharp response✅ C4 Red soft compound optimized for maximum traction✅ Dual mini wedge edges + radial rib for stable, consistent grip✅ Directional tread for tunable performance✅ Ideal for modern carpet and turf racing 📦 Includes:(2) Viper 2.2" Rear LP Tires(2) Black Closed Cell Inserts 💡 Pro Tip: Run C4 in colder conditions or low-grip indoor tracks to bring your setup to life.

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Pre-Mount Buggy Tires (2) — Yellow (C3 Green/Medium)Part #: 3090-C3-Y Low-Profile Speed. Carpet-Tuned Control. Engineered for precision, the Pro-Motion Viper 2.2" LP Rear Buggy Tire is built to dominate on high-traction carpet and turf tracks. With a low-profile carcass for reduced sidewall flex and quicker response, the Viper delivers unmatched stability and cornering grip. Its tapered pin tread and directional radius pattern provide predictable traction, while mini wedges and a radial rib add versatility across various conditions. ✅ Pre-mounted on yellow wheels—ready to race✅ Low-profile carcass enhances response and stability✅ Tapered mini pin design for maximum grip✅ Directional tread for fine-tuned traction control✅ Designed for 1/10 scale carpet and turf racing✅ C3 compound for medium traction balance 📦 Includes:(2) Viper LP Rear Pre-Mounted Tires(2) Foam Inserts 💡 Pro Tip: Combine with Pro-Motion Slim Front LPs for a fully dialed-in carpet setup.

Read more less

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31389Maximum Spacing. Race-Ready Adjustability. The Team Associated 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers (31389) are ideal for making larger wheelbase and hub spacing adjustments on RC8B3 and RC8T3 series vehicles—or any platform that uses 3.5mm hinge pins. Durable and lightweight, these aluminum washers are a reliable tuning option for racers who want full control over rear-end geometry. ✅ Size: 7.8mm OD x 3.5mm ID x 2.0mm thick✅ Anodized blue 7075 aluminum – high strength, low weight✅ Designed for wheelbase and hub spacing adjustments✅ Compatible with 3.5mm hinge pin platforms✅ Pairs perfectly with 0.5mm and 1.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers Part #: 31389 💡 Pro Tip: Use thicker spacers like this to extend wheelbase for more high-speed stability or track-specific tuning.

Read more less

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washers – Blue (10) – Part 31387Fine-Tune Wheelbase. Maximize Setup Precision. The Team Associated 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers (31387) are perfect for adjusting wheelbase and tuning suspension geometry on vehicles with 3.5mm hinge pins. Commonly used on the RC8B3 and RC8T3 series, these lightweight spacers are also compatible with other platforms that accept 3.5mm hinge pins. ✅ Pack of 10 high-precision spacers✅ Size: 7.8mm OD x 3.5mm ID x 0.5mm thick✅ Blue anodized aluminum – lightweight and corrosion-resistant✅ Used for fine-tuning wheelbase and hub spacing✅ Compatible with RC8B3, RC8T3, and any vehicle using 3.5mm hinge pins✅ Also available in 1.0mm and 2.0mm thicknesses (sold separately) 📦 Includes: (10) 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers Part #: 31387 💡 Pro Tip: Stack different thicknesses to get the exact rear end length or toe-in setup you're after.

Read more less

Team Associated FT Carbon Fiber Front Suspension Arms – ASC92297 Precision Performance for RC10B74.1 & B74.1D Upgrade your B74.1's front end with these Factory Team Carbon Fiber Front Suspension Arms, engineered for lightweight strength and high-traction performance. These arms deliver sharper, more stable handling, especially in fast corners and on high-grip tracks. ⚙️ Features: ✅ Carbon Fiber Construction – Extreme rigidity for responsive steering and stability ✅ 12% Lighter than “hard” material arms ✅ Boosted Durability – Significantly stronger than standard “hard” arms ✅ Factory Team quality for competition-level performance 📦 Includes: (1) Left Front Carbon Suspension Arm (1) Right Front Carbon Suspension Arm ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D 🔧 Perfect for racers seeking precision handling and reduced unsprung weight.

Read more less

Team Associated RC10B74.2 FT Lightweight Driveline Center Kit – ASC92372 Maximize Efficiency. Minimize Rotational Mass. Take your RC10B74 to the next level with the Factory Team Lightweight Center Driveline Kit. Designed specifically for 13.5T Spec class racing, this kit reduces rotational mass by an impressive 19.3g compared to the standard steel setup—resulting in quicker acceleration and improved handling. ⚙️ Features: ✅ Reduces center driveline mass by 19.3g ✅ Includes lightweight dogbones and aluminum outdrives ✅ Plastic blade inserts reduce metal-to-metal wear ✅ Designed for use with center differential (not slipper) ✅ Ideal for 13.5T Spec racing class 📦 Includes: Lightweight center dogbones Aluminum outdrives Plastic blade inserts Complete hardware for installation ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.1D RC10B74.2 RC10B74.2D ⚠️ Note: Not recommended for modified racing or use with slipper clutch systems. 🏁 Built for racers chasing every gram of performance advantage.

Read more less

Team Associated RC10B74.2 Differential Pinion Gear Shims (5x6.5x1mm) – ASC92319 Precision Spacing for Consistent Gear Mesh. These Factory Team 5x6.5x1mm differential pinion gear shims are designed specifically for the RC10B74.2 and B74.2D. Ideal for maintaining correct gear mesh and minimizing drivetrain wear, these shims ensure smooth differential operation and long-term performance. 🔧 Features: ✅ OEM-quality replacement shims ✅ Sized 5x6.5x1mm for perfect pinion gear fit ✅ Helps fine-tune gear mesh and reduce wear ✅ Compatible with RC10B74.2 & B74.2D 📦 Includes: (Set of) Differential Pinion Gear Shims (5x6.5x1mm) 🛠️ Keep your drivetrain dialed in with these must-have tuning components!

Read more less

Team Associated Aluminum LRC "D" Arm Mount – RC10B74.1 Optimize rear suspension geometry with precision. The ASC92261 Aluminum LRC "D" Arm Mount is a factory replacement part designed for the RC10B74.1 and B74.1D 1/10 scale 4WD electric buggies. Built from durable aluminum, this mount delivers enhanced strength and consistent performance under race conditions. ⚙️ Features: 🧱 CNC-machined aluminum for increased durability 📐 LRC (Low Roll Center) geometry helps fine-tune rear suspension behavior 🔧 Direct fit replacement for kit-supplied “D” arm mount 📦 Includes: (1) Aluminum LRC "D" Arm Mount ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Maintain your edge on the track with genuine Team Associated tuning components.

Read more less

🔌⚡ Clean Wiring. Reliable Signal. Low-Profile Design. The ProTek RC Flat Sensor Wire is designed to provide consistent, interference-free communication between your sensored brushless motor and ESC. With a slim, flat design, it keeps your build clean while improving wire routing in tight chassis layouts. 🏁 About This Sensor Wire 📏 Clean, Low-Profile Routing The flat cable design allows easy routing under components and through tight spaces, reducing clutter and improving overall build appearance. ⚡ Reliable Signal Transfer Engineered for consistent, interference-resistant communication, ensuring smooth motor performance in sensored brushless setups. 🎯 Perfect Fit Length At 150mm, this cable is ideal for a wide range of 1/10 scale applications and clean electronics layouts. 🔧 Key Features ✔ Low-profile flat cable design✔ Reliable signal transfer for sensored systems✔ Slim construction for easy routing✔ Helps reduce wiring clutter✔ Interference-resistant performance✔ Optimized for brushless motor/ESC communication 📦 Includes (1) Flat Sensor Wire (150mm) 📊 Specifications Length: 150mm 🧰 Recommended Use Sensored brushless motor to ESC connection Clean electronics installations Organized wiring setups  

Read more less

🏁 Clean Look. Lightweight Upgrade. Precision Fit. Upgrade your sway bar setup with this R1WURKS aluminum hardware set, designed to replace the stock components with a lightweight, blacked-out look and precise fit. 🏁 About the Sway Bar Hardware Set ⚙️ Lightweight & Durable Machined from high-strength 7075-T6 aluminum, these components offer a solid balance of durability and reduced weight. 🎯 Precision Fit CNC machining ensures accurate fitment and smooth operation, helping maintain consistent sway bar performance. 🖤 Clean, Blacked-Out Style Finished in matte black anodizing with subtle R1 laser-etched branding for a sleek, professional appearance. 🔧 Key Features ✔ 7075-T6 aluminum construction✔ Precision CNC-machined components✔ Matte black anodized finish✔ Laser-etched R1 branding✔ Lightweight sway bar balls✔ Direct replacement upgrade 📦 Includes (2) Sway Bar Bearing Collars (2) Sway Bar Balls (4) M3x3 Set Screws 🚗 Compatibility Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated RC10 B84 Team Associated RC10 B84D Team Associated RC10 B7 Team Associated RC10 B7D 🏁 Simple upgrade. Clean look. Dialed performance.  

Read more less

Seal & Hardware Overview:This is a replacement differential seal and hardware set designed for the Team Losi Racing 22X-4 platform. It helps maintain proper differential sealing and ensures reliable operation. 🔧 Key Features ✔ Replacement diff seal and hardware set✔ Helps maintain proper sealing✔ Supports smooth differential performance✔ Direct fit design 📦 Includes Differential seals Associated hardware 🚗 Compatibility Team Losi Racing 22X-4 Ideal for maintenance or rebuilds, this set helps keep your differential sealed properly and performing consistently.  

Read more less

Ring Gear Overview:This is a replacement differential ring gear designed for the Team Losi Racing 22X-4 platform. It ensures proper drivetrain function and smooth power transfer through the differential. 🔧 Key Features ✔ Replacement differential ring gear✔ Maintains smooth drivetrain operation✔ Direct fit design 📦 Includes (1) Differential Ring Gear 🚗 Compatibility Team Losi Racing 22X-4 Ideal for replacing worn or damaged components, this ring gear helps keep your drivetrain running consistently and reliably.    

Read more less

Get clean, reliable solder joints every time with the ProTek RC Premium Rosin Core Solder 60/40. Designed for RC electronics and precision work, this solder features a classic 60/40 tin-to-lead blend that delivers smooth flow, excellent conductivity, and easy handling for everything from simple repairs to full custom builds. The integrated rosin core flux promotes strong bonding and clean joints by improving wetting action and reducing oxidation. Whether you're soldering connectors, wiring, or electronics, this solder provides consistent, professional-quality results. 🔧 Features:• 60/40 tin-to-lead blend for reliable performance• Rosin core flux for clean, strong solder joints• Smooth flow for easy and precise application• Excellent electrical conductivity• Helps reduce oxidation and improve bonding• Ideal for RC wiring, connectors, and electronics 📦 Includes:• (1) ProTek RC Premium Rosin Core Solder 60/40 (12g) ⚙️ Specifications:• Weight: 12g• Type: Rosin Core Solder• Composition: 60/40 Tin/Lead Perfect for builders and racers alike, the ProTek RC 60/40 solder delivers dependable performance and clean results for all your RC electronics work.  

Read more less

Built for national-level competition, the Trinity Slot Machine 2 Certified 13.5T Brushless Motor delivers elite performance, precision throttle control, and race-proven consistency. Each certified motor is hand-selected for top performance and includes a dyno sheet verifying peak output, giving racers confidence in their equipment right out of the box. Designed for competitive stock-class racing, this sensored motor provides smooth power delivery and excellent efficiency on the track. 🏁 Competition-Level Performance The Slot Machine 2 motor features a precision sensored design that ensures smooth throttle response and predictable power delivery. This makes it ideal for tight, technical tracks where consistent control and acceleration are critical. A highly machined aluminum motor can reduces weight while dramatically improving heat dissipation, helping maintain performance during long mains and qualifying heats. ⚙️ Tunable & Race Ready The motor includes a tunable endbell with laser-etched timing marks, making timing adjustments quick, precise, and repeatable for racers dialing in their setup. Each certified version is hand selected and dyno tested, ensuring it meets Trinity’s top performance standards. ⚡ Features Certified hand-selected high-performance motor Includes dyno sheet verifying peak performance Sensored brushless design for smooth throttle response Lightweight heavily machined aluminum motor can Improved cooling and heat dissipation Adjustable timing with laser-etched endbell markings Designed for high-level competition racing ROAR approved for sanctioned events 📦 Includes (1) Trinity Slot Machine 2 Certified Brushless Motor (13.5T) Dyno performance readout Designed for racers who want proven dyno-tested performance and championship-level reliability, the Trinity Slot Machine 2 Certified motor is built to perform when it matters most.

Read more less

Upgrade your pit setup with the 1UP Racing Pro Pit Tray Set with Shock Stands Combo—a sleek, all-in-one workspace solution built for racers who demand organization, efficiency, and professional presentation. This complete pit system features precision-machined aluminum construction with a dual satin and gloss black finish for a high-end look. The tray is designed with the perfect depth, smooth filleted corners, and dedicated cutouts for differential outdrives, keeping parts secure and easy to access. Hidden magnets hold body clips in place and securely attach the included on-road and off-road shock stands. Both shock stands feature forged carbon trays and magnetically collapse into the included protective storage box with foam inserts, making transport clean and safe. Features Precision-machined aluminum pit tray Dual satin & gloss black finish Ideal tray depth with smooth filleted corners Hidden magnets for body clip storage Differential outdrive cutouts Includes on-road and off-road shock stands Shock stands magnetically attach to tray Forged carbon shock stand trays Protective storage box with foam insert included Includes (1) Pro Pit Tray (1) Off-Road Shock Stand (1) On-Road Shock Stand (1) Storage Box with Foam Insert A premium pit solution designed to keep your workspace organized, efficient, and race-ready—every time you wrench. 🏁  

Read more less

The 1UP Racing TLR 22X-4 Chassis Protector Sheet is a simple and effective way to protect your chassis from wear while adding a clean carbon fiber look to your build. Pre-cut specifically for the TLR 22X-4 buggy, this sheet is ready to apply right out of the package. Made from thick, durable vinyl and paired with an extremely tacky adhesive, this chassis protector can be peeled off and re-applied up to 7–8 times, making it both long-lasting and reusable. Features Pre-cut to fit TLR 22X-4 Thick, durable vinyl construction Carbon fiber style appearance Extremely tacky adhesive Reusable up to 7–8 applications Protects chassis from wear and abrasion Includes (1) TLR 22X-4 Reusable Chassis Protector Sheet Fitment TLR 22X-4 A clean, reusable chassis protection solution built for racers who want durability without sacrificing style. 🏁

Read more less

The Team Associated 92516 RC10B7 Rear Suspension Arms (81mm) are an optional geometry upgrade compared to the standard 78mm rear arms. While 78mm arms are the direct replacement, these 81mm arms are designed for racers looking to experiment with rear suspension geometry, stability, and tuning options. ⚠️ IMPORTANT – NOT A DIRECT BOLT-ONThese 81mm arms require additional parts to install correctly. This is not a simple swap, and is recommended for racers comfortable with setup changes. What’s Different vs 78mm Arms Longer 81mm arm length Changes rear geometry and axle position Results in a 1mm total rear width difference Requires different rear hub offset and drivetrain parts Required Parts for 81mm Conversion To run these arms properly, the following parts are required (per Team Associated supplement): RC10B7 Rear Hub Set, -4mm Offset (P/N 92518) HD CVA Bones, 71mm (P/N 92549) B74 CVA Axle, 66mm (P/N 92207) 1mm Wider Hex 1 Higher Axle Height Setting Features Genuine Team Associated option part Durable molded composite construction Designed for RC10B7 platform Allows advanced rear suspension tuning Compatibility RC10B7 with required supporting components Who This Is For Racers tuning rear grip and stability Builders experimenting with alternative geometry Not recommended as a basic replacement arm 🏁 Pro Tip: Make sure all required parts are installed together to maintain correct drivetrain alignment and handling.

Read more less

Upgrade or replace your steering hardware with the XRAY Composite Extended Steering Servo Arm Set. Designed for precision and durability, these servo arms provide a secure fit and consistent steering response for XRAY competition platforms. Manufactured from high-quality composite material, each arm is precision machined for accurate spline engagement and easy installation right out of the package. Features & Benefits: High-quality composite construction for strength and durability Extended design for precise steering geometry Precision machined for accurate spline fit Easy installation with consistent steering performance Compatibility: XRAY XB4 XRAY XT2 1/10 Dirt & Carpet Competition Buggy and Stadium Truck platforms Includes: (1) 23T servo arm (1) 25T servo arm A clean, reliable replacement set to keep your XRAY steering system tight and responsive on any surface.    

Read more less

The ProTek RC Braided Brushless Motor Sensor Cable is a premium replacement sensor wire designed for sensor-based brushless motor systems that use removable sensor harnesses. Built for reliability and durability, this cable ensures clean, consistent signal transfer between your ESC and motor—race after race. Why You’ll Want It This cable uses individual silicone-shielded sensor wires wrapped in a black braided nylon sleeve, giving it excellent flexibility while protecting against abrasion, vibration, and shock. Shrink-wrapped ends keep everything secure and tidy, making it ideal for high-performance racing environments where reliability matters most. Features Compatible with most sensor-based brushless ESC & motor systems Individual silicone-shielded sensor wires for flexibility Braided nylon outer sheath for abrasion and impact protection Shrink-wrapped ends for durability and clean routing Smooth, reliable data transfer between ESC and motor Lightweight and race-proven design Specifications Length: 90mm Part Number: PTK-2107 Type: Brushless Motor Sensor Cable Wire Protection: Braided nylon sleeve with silicone-shielded internal wires Perfect for racers looking to replace a worn sensor wire or upgrade to a more durable, track-ready option that won’t hold your electronics back.

Read more less

Give your RC10B84 the world-class aero advantage it deserves with the JConcepts S15 Buggy Body. Debuted at the IFMAR World Championships, the S15 blends proven design cues from the Punisher, Finnisher, and Silencer series into a modern, high-downforce shell built for competition on carpet, turf, or dirt. Available in Standard or Lightweight versions to match your driving style and track conditions. Why Racers Choose the S15 The S15 is engineered for sharp cornering, stable straight-line tracking, and smooth airflow management. With its balanced single-cockpit layout, chamfered side pods, aggressive roof fin, and sculpted rear spoiler, this body offers increased stability without compromising steering response. It also provides generous room for decals and logos—perfect for sponsored or team drivers. Key Features IFMAR World Championship-winning S15 body design Optimized deflection angles & refined side pod winglets Centerline roof fin for improved tracking and durability Rear spoiler shape adds consistent rear downforce Tight, efficient chassis fit for max aero performance Trimmable rear section helps vent heat from electronics Available in Standard or Lightweight material options Includes (1) JConcepts RC10B84 S15 Clear Buggy Body (2) JConcepts Turf/Carpet/Dirt Wings (1) Decal Sheet (1) Window Mask Set Notes Body ships clear and unpainted Painted example shown for reference only

Read more less

Dial in your setup with absolute confidence! The 1UP Racing Pro Pit Scale delivers ultra-fine accuracy, making it the perfect tool for weighing parts, tires, diffs, hardware, and more. Whether you're chasing consistency, balancing components, or fine-tuning for race day, this compact powerhouse gives you the precision trusted by top-level racers. Engineered with a 0.01g resolution, 500g capacity, and a crisp blue backlit LCD, the Pro Pit Scale is built for serious tuning in any pit environment. A stainless steel weighing platform, laser-etched branding, and a protective cover complete the professional-grade feel. Key Features: ✔️ 0.01g Precision – High-resolution measurement for pro-level tuning✔️ 500g Capacity – Perfect for tires, diffs, hardware, and small components✔️ Stainless Steel Platform – Durable, stable, and easy to clean✔️ Blue Backlit LCD – Clear visibility in any lighting✔️ Laser-Etched 1UP Logos – Clean, premium aesthetic✔️ 9 Weighing Modes – Versatile for all hobby and workshop uses✔️ Full-Capacity Tare Range – Zero out trays or containers instantly✔️ Protective Cover & Parts Tray Included – Ready for pit bench or travel Includes: (1) 1UP Racing Pro Pit Scale (2) AA Batteries (1) Protective Cover / Parts Tray Specifications: Capacity: 500g (17.637oz) Resolution: 0.01g (0.00035oz) Overall Size: 5 × 4.17 × 0.74 in (127 × 106 × 19mm) Platform Size: 3.93 × 3.93 in (100 × 100mm)

Read more less

The 1RC Racing 1/18 Servo Extension Wire is a direct replacement part designed for the 1RC Racing 1/18 chassis lineup. Perfect for extending servo reach or cleanly routing wires through your setup, this high-quality extension ensures a secure, low-resistance connection between components. ⚙️ Features: Genuine 1RC Racing replacement part 100mm length for flexible installation Durable, high-quality wire construction for reliable signal transfer Ideal for clean wire management on your 1/18 scale setup 📦 Includes: (1) 1RC Racing 1/18 Servo Extension Wire (100mm)  

Read more less

Upgrade your aero package with the JConcepts Aero Front Wing — purpose-built for the Team Associated RC10B84 4WD buggy. Developed alongside top pro drivers, this radical, edgy wing design enhances steering response, downforce, and stability, giving you the extra front-end grip needed to push harder in corners and over jumps. The lower front-mounted design delivers balanced handling and complements JConcepts’ Punisher, Finnisher, Silencer, and S15 bodies, completing your high-performance setup. 🏆 Proven Performance:Used to TQ and win the 2025 IFMAR 1/10 Off-Road World Championships in Castle Hills, Australia — proof of world-class design and engineering. ⚙️ Features: Original JConcepts Aero design for the RC10B84 platform Radical, edgy styling improves steering and high-speed stability Lightweight yet durable for racing abuse Includes cut lines and dimple marks for precise trimming and easy mounting Perfect complement to JConcepts 1/10 off-road buggy bodies Mounts directly to the front gearbox of the Team Associated B84 📏 Specifications: Part Number: 0534 Vehicle Compatibility: Team Associated RC10B84 4WD Buggy Material: Lightweight polycarbonate Quantity: 2 wings per package 📦 Includes: (2) JConcepts Aero Front Wings Mounting and trimming guide 💡 Pro Tip:Pair this front wing with a JConcepts S15 or Finnisher body for a fully optimized aerodynamic setup that delivers quicker corner entry and improved jump control — proven on the world stage.  

Read more less

Durable factory replacement for the XB2 1/10 Buggy Overview:The XRAY XB2 Hard Graphite Composite Rear Suspension Arm delivers race-proven durability and precision handling for your XB2 1/10 buggy. Manufactured from XRAY’s exclusive hard graphite-reinforced composite, this arm provides the perfect balance of stiffness and flex—ideal for high-traction surfaces and competitive racing. About the Rear Suspension ArmThis left-side rear arm features XRAY’s signature design for smooth suspension movement and maximum impact strength. The hard graphite material improves cornering consistency and reduces flex under load, providing a more responsive feel and better traction balance across a range of track conditions. Features: Genuine XRAY Factory Team part Hard graphite composite for increased stiffness and reduced flex Provides improved steering precision and consistent cornering Ideal for high-grip indoor and outdoor tracks Precision-molded for perfect fit and geometry Lightweight yet highly durable construction Specifications: Part Type Rear Suspension Arm (Left) Material Hard Graphite Composite Vehicle Compatibility XRAY XB2 1/10 2WD Buggy Position Rear – Left Side Includes: (1) Hard Graphite Composite Rear Suspension Arm (Left)

Read more less

Push performance to the limit with this 2S 7.4V 6500mAh 160C Low-Profile Stick Pack, engineered with the best proprietary LiPo cells available. Designed for racers who demand the absolute maximum in power delivery, voltage consistency, and reliability, this pack delivers explosive acceleration with cool, stable performance. 🔥 Key Features: High-output 160C discharge rating for extreme current delivery Built with premium proprietary LiPo cells — top-tier performance and reliability Low-profile stick pack design for improved weight balance Ideal for high-demand race setups and competition use Precision-matched cells for consistent voltage under load ⚙️ Specifications: Voltage: 7.4V (2S) Capacity: 6500mAh Discharge Rate: 160C Dimensions: 22mm (H) x 47mm (W) x 139mm (L) Connector: 5mm bullet Weight: 279g 📦 Includes: (1) 2S 7.4V 6500mAh 160C LP Stick Pack 🛡️ Warranty: 90-day manufacturer’s warranty against defects ⚠️ Tip:Always balance charge and monitor pack temperature during use. Avoid over-discharging — maintain cells above 3.2V for best longevity.

Read more less

Upgrade your buggy’s performance with the Team Associated RC10B84 Factory Team Carbon Chassis Brace Set. Designed for the RC10B84 1/10 4WD Off-Road Electric Buggy Kit, this optional Factory Team upgrade delivers increased chassis rigidity without adding unnecessary weight. ✅ Rigid & Lightweight – Carbon construction improves stiffness while keeping weight low✅ Enhanced Handling – Added rigidity boosts steering response and overall control✅ Factory Team Quality – Precision-engineered to fit seamlessly✅ Easy Installation – A practical upgrade for serious racers Includes: (1) RC10B84 Factory Team Carbon Chassis Brace Set Compatibility: Team Associated RC10B84  

Read more less

Upgrade the drivetrain of your XRAY XB4 2024/2025 with the Exalt Hybrid-XSN Ceramic Bearing Kit. Featuring a precision-engineered hybrid design, these bearings pair Silicon Nitride ceramic balls with stainless steel inner/outer rings for smoother operation, higher speed, and greater impact resistance than traditional full steel or full ceramic bearings. Pre-lubricated with Exalt Oil Slick Hi-Speed PTFE Bearing Oil, this kit provides out-of-the-box performance that’s built for the demands of racing. 🔥 Key Features: Designed for the XRAY XB4 2024 & 2025 1/10 4WD Buggy Hybrid design: Silicon Nitride ceramic balls + stainless steel rings Faster and smoother than all-steel bearings More impact-resistant than full ceramic bearings Lightly lubricated with Exalt Oil Slick Hi-Speed PTFE Bearing Oil (EXA9314) Serviceable: clean with citrus cleaner or acetone, re-lube as needed Built for maximum performance in both spec and modified racing ✅ Compatibility: XRAY XB4 2024 XRAY XB4 2025 📦 Includes: (16) Hybrid-XSN Ceramic Bearings (complete kit for XB4 2024/2025) ⚠️ Tip:Check your bearings before each race day and re-oil as needed to ensure peak drivetrain efficiency and extended bearing life.  

Read more less

Upgrade your RC10B74's steering performance with the 9-degree Caster Blocks from Team Associated. Designed for precision and durability, these caster blocks deliver improved cornering stability and increased on-power steering response. 🛠️ Key Features: 9° caster angle for improved handling characteristics Factory Team quality with tight manufacturing tolerances Durable composite construction Direct fit for RC10B74 front suspension 📦 Includes: (1) Pair of 9° Caster Blocks (left & right) ✅ Compatibility: Team Associated RC10B74 and variants (check manual for specific fitment) Ideal for racers looking to fine-tune front-end geometry to suit different track conditions. A must-have tuning option for competitive setups.

Read more less

Fine-tune your RC10B74.2’s rear suspension geometry with this Rear Gearbox Adjustable Height Insert Set. Whether you're dialing in anti-squat or adjusting rear drive angles, these inserts give you the flexibility to get the most out of your setup. 📌 Key Features: Precision-molded plastic insert set Allows for rear gearbox height adjustment Fine-tune rear suspension geometry and anti-squat Designed specifically for RC10B74.2 and RC10B74.2D platforms 📦 Includes: Multiple insert pairs for adjustable configurations Designed to work with standard rear gearbox components ✅ Compatibility: RC10B74.2 RC10B74.2D Ideal for racers looking to squeeze out extra performance on varying track conditions — essential for serious 1/10 4WD competition setups.

Read more less

Keep your drivetrain dialed in with the Factory Team Decoupled Slipper Thrust Bearing Rebuild Set for the RC10B74.2. Designed specifically for the decoupled slipper assembly, this kit includes everything needed to service the thrust bearing for smooth operation and consistent performance on the track. 📌 Key Features: Genuine Team Associated Factory Team part Restores slipper clutch smoothness and reliability Precision components for minimal friction Essential for regular maintenance of decoupled slipper setups 📦 Includes: Complete thrust bearing rebuild components (washers, balls, etc.) Enough to fully service one decoupled slipper thrust bearing assembly ✅ Compatibility: RC10B74.2 with Factory Team Decoupled Slipper System

Read more less

Team Associated RC10B74.2 FT Center Dogbone Blades (Part #92374) Keep your drivetrain running smooth and efficient with the Factory Team Center Dogbone Blades for the RC10B74.2. These precision-machined blades are engineered to reduce friction, minimize wear, and provide consistent performance under extreme racing conditions. A must-have for serious 1/10 4WD racers looking to maintain their competitive edge. 📌 Key Features: Genuine Factory Team upgrade Designed specifically for center dogbones Reduces friction and drivetrain wear Improves longevity and performance Lightweight and durable material 📦 Includes: (4) Center Dogbone Blades ✅ Compatibility: Team Associated RC10B74.2 RC10B74.2D May also fit other B74 variants with center dogbone setup

Read more less

The Team Associated Factory Team Steering Block Arms +2 are a precision upgrade for your RC10B74 series vehicle. With a 2mm longer length than stock, these arms enhance steering geometry for improved handling and tuning options—especially beneficial on high-bite surfaces where extra steering stability is critical. 📌 Key Features: +2mm longer for refined steering geometry Factory Team upgrade for precision fit and durability CNC-machined for consistent performance Ideal for tuning your RC10B74.2 to specific track conditions 📦 Includes: (1) Left Steering Block Arm (+2) (1) Right Steering Block Arm (+2) ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2

Read more less