Team Associated 13mm Rear Shock Spring. These replacement springs springs are intended for the Team Associated B6.4D, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

This is pack of Team Associated Differential Cross Pins, intended for use with the Team Associated RC10 B74 Team 1/10 4WD Off-Road Electric Buggy as a replacement for the kit supplied part. Includes: (2) Differential Cross Pins  (2) 2x9mm Dowel Pins COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

This is a Team Associated Front Axle Crush Tube set, intended for use with the Team Associated RC10 B74 Team 1/10 4WD Off-Road Electric Buggy as replacement for the kit supplied front axel crush tubes. Includes: (2) Front Axle Crush Tubes 

Read more less

  Upgrade your slipper clutch with the Team Associated 19mm Octalock Slipper Pad. Featuring the Octalock design, this pad offers improved consistency, smoother power delivery, and longer-lasting performance compared to standard slipper pads. ✅ Octalock Design – Delivers smoother engagement and improved slipper consistency✅ Durable Material – Built to handle high power and repeated use✅ Direct OEM Replacement – Genuine Team Associated part for perfect fitment Includes: (1) 19mm Octalock Slipper Pad Compatibility: Team Associated vehicles equipped with 19mm Octalock spur gears and slipper assemblies (B6.2, B6.3, B6.4, T6.2, T6.4, SC6.2, SC6.4, and B74 series) Check your manual for exact fitment Part #: 92288

Read more less

Team Associated RC10B74.2 Rear Gearbox. This is a replacement gearbox intended for the RC10B74.2 and B74.2D series of vehicles. Package includes one lower rear gearbox, one upper rear gearbox and one sway bar retainer. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated 3.5x42mm Steel Turnbuckles. These are replacement steering and front camber link turnbuckles intended for the RC10B74.2 and B74.2D series of vehicles. Package includes two 3.5x42mm turnbuckles. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated RC10B74 HD Differential Outdrives. These are replacement outdrives intended for the RC10B74 and RC10B74D buggies. Package includes two outdrives. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

1up Racing Red CV Joint Oil – Smoother, Faster, Cleaner ⚙️ Looking for max performance and zero compromise? 1up Red CV Joint Oil is the top choice for racers demanding ultra-smooth suspension and long-lasting protection. Trusted worldwide, this ultra-slick formula keeps your drivetrain buttery-smooth while repelling dirt and debris like a champ. 💡 Whether you're rebuilding for race day or tuning your rig for fun, Red is the upgrade your CV joints and universals deserve. ✨ Key Features: 🧴 Leakproof 8ml Bottle – Take it anywhere, worry-free🧲 Stainless Needle Tip – Pinpoint accuracy with every drop🔐 Childproof Cap – Safety-first, pit-friendly packaging🔴 Engineered for CV Joints & Universals – Extreme performance and longevity🧼 Slick, Clean Finish – Repels dirt and dust for clean, efficient operation🌍 Proven Worldwide – Trusted by top racers across the globe 💡 Join the movement – experience the power of Red today!  

Read more less

1up Racing Pro-RX F-4G 2.4GHz Receiver – Futaba-Compatible, High-Performance & Affordable! Upgrade your RC system with the 1up Racing Pro-RX F-4G 2.4GHz Receiver, a high-performance yet budget-friendly alternative designed to work seamlessly with Futaba radio systems. Endorsed by 1up Racing Factory Drivers, this receiver has been rigorously tested to deliver elite-level reliability and responsiveness, making it a top choice for serious racers. Key Features: ✅ F-4G System Compatibility – Perfectly integrates with Futaba’s latest radio technology.✅ S.BUS2 Telemetry Support – Enables real-time telemetry data transmission for advanced monitoring.✅ 4-Channel PWM Output – Versatile control for multiple applications.✅ Ultra-Compact Size (27.5 x 20.5 x 18mm) – Easily fits in tight spaces, perfect for 1/10 & 1/12 scale RC setups.✅ Feather-Light Weight (5g) – Minimal weight impact for race-optimized performance.✅ Wide Operating Voltage (3.5V-8.4V) – Compatible with a range of power sources.✅ Built-in Antenna – Sleek design without external antenna clutter. Compatible With: ✔ Futaba 10PX ⚠️ Note: Antenna-free receivers may reduce range. For extended-range needs, consider a receiver with an external antenna. In the Box: (1) 1up Racing Pro-RX F-4G 2.4GHz Receiver (1) Protective Plastic Case (1) Bind Plug (1) Instruction Manual Precision Performance at an Affordable Price! The 1up Racing Pro-RX F-4G offers top-tier performance, seamless Futaba compatibility, and high-end reliability—all without the premium price tag. Whether you're upgrading your race setup or replacing a factory receiver, this lightweight, telemetry-ready receiver delivers unmatched precision and control. 🔥 Upgrade today and experience race-winning performance! 🏁💨

Read more less

Team Associated RC10B74.2 Factory Team Carbon Rear Gearbox – Part #92327🛠️ Stronger. Lighter. Factory-Ready. The Factory Team Carbon Rear Gearbox is a premium upgrade for your RC10B74.2 or B74.2D. Engineered for lightweight strength and race-ready reliability, this precision-molded carbon-reinforced gearbox improves stiffness and reduces weight in critical drivetrain areas—perfect for serious racers looking for an edge. ✅ Direct fit for RC10B74.2 & RC10B74.2D✅ Carbon-reinforced for reduced flex and improved durability✅ Includes sway bar mount for added tuning options✅ Genuine Factory Team performance part 📦 Includes: (1) Carbon Rear Gearbox Base (1) Gearbox Cover (1) Sway Bar Bracket

Read more less

Pro-Motion Viper 2.2" Slim 2WD Front Pre-Mount LP Carpet Buggy Tires (2) — C3 Green (Medium Compound, White Wheels)Part #: 3070-C3-W Race-Ready Precision. Built-In Speed. The Pro-Motion Viper Slim Pre-Mounts are made for the front of 2WD 1/10 buggies, combining speed, control, and convenience. Featuring a low-profile carcass and advanced directional tread pattern, these C3 Green medium compound tires offer balanced front-end grip and stability—ideal for clean, high-traction carpet or turf tracks. Pre-mounted on white wheels so you can hit the track faster and focus on winning. ✅ Pre-mounted on durable white wheels✅ C3 Green medium compound for consistent front traction✅ Slim profile for 2WD front buggy setups✅ Low-profile sidewall for sharper steering and reduced flex✅ Directional tapered pin tread for tuning potential 📦 Includes:(2) Viper 2.2" Slim 2WD Front Pre-Mount Tires (White Wheels) 💡 Pro Tip: Pair with matching C3 rears for optimal balance and predictable cornering.

Read more less

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31389Maximum Spacing. Race-Ready Adjustability. The Team Associated 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers (31389) are ideal for making larger wheelbase and hub spacing adjustments on RC8B3 and RC8T3 series vehicles—or any platform that uses 3.5mm hinge pins. Durable and lightweight, these aluminum washers are a reliable tuning option for racers who want full control over rear-end geometry. ✅ Size: 7.8mm OD x 3.5mm ID x 2.0mm thick✅ Anodized blue 7075 aluminum – high strength, low weight✅ Designed for wheelbase and hub spacing adjustments✅ Compatible with 3.5mm hinge pin platforms✅ Pairs perfectly with 0.5mm and 1.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers Part #: 31389 💡 Pro Tip: Use thicker spacers like this to extend wheelbase for more high-speed stability or track-specific tuning.

Read more less

Team Associated 5.5x0.5mm Aluminum Ball Stud Washers – Blue (10) – Part 31381Precise Tuning. Clean Looks. Universal Fit. The Team Associated 5.5x0.5mm Aluminum Ball Stud Washers (31381) are a must-have for fine-tuning suspension geometry and roll center adjustments. With a small outside diameter and anodized blue finish, these lightweight washers are ideal for 1/10 scale vehicles, especially touring and on-road setups. ✅ Pack of 10 precision-machined washers✅ 5.5mm outer diameter / 0.5mm thickness✅ Made from lightweight aluminum – won't add unwanted weight✅ Blue anodized finish – clean, pro-level look✅ Perfect for ball stud spacing and suspension tuning✅ Fits all 1/10 scale vehicles – off-road or on-road 📦 Includes: (10) 5.5x0.5mm Blue Aluminum Ball Stud Washers Part #: 31381 💡 Pro Tip: Use multiple washers to stack for exact suspension height or link angle adjustments.

Read more less

Team Associated RC10B74.2 FT Lightweight Driveline Center Kit – ASC92372 Maximize Efficiency. Minimize Rotational Mass. Take your RC10B74 to the next level with the Factory Team Lightweight Center Driveline Kit. Designed specifically for 13.5T Spec class racing, this kit reduces rotational mass by an impressive 19.3g compared to the standard steel setup—resulting in quicker acceleration and improved handling. ⚙️ Features: ✅ Reduces center driveline mass by 19.3g ✅ Includes lightweight dogbones and aluminum outdrives ✅ Plastic blade inserts reduce metal-to-metal wear ✅ Designed for use with center differential (not slipper) ✅ Ideal for 13.5T Spec racing class 📦 Includes: Lightweight center dogbones Aluminum outdrives Plastic blade inserts Complete hardware for installation ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.1D RC10B74.2 RC10B74.2D ⚠️ Note: Not recommended for modified racing or use with slipper clutch systems. 🏁 Built for racers chasing every gram of performance advantage.

Read more less

Team Associated Rear CVA Axle – 66mm (RC10B74) Restore or upgrade your B74 drivetrain. The ASC92207 66mm Rear CVA Axle is a precision-engineered replacement part designed specifically for the Team Associated RC10B74. Whether you're maintaining performance or rebuilding after wear, this axle ensures smooth power delivery and durability for competitive 1/10 4WD off-road racing. ⚙️ Features: 🛞 66mm length optimized for rear CVA driveshaft assemblies 🧰 Direct replacement for factory parts 💪 Hardened for strength and longevity under racing conditions 📦 Includes: (1) 66mm Rear CVA Axle ✅ Compatibility: Team Associated RC10 B74 Keep your B74 running smooth and race-ready with genuine Team Associated drivetrain components.

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/6000mAh) – 140C Burst Race-Ready Power. Expanded Runtime. Shorty Format. Push your limits with the Gens Ace Redline 2.0 6000mAh LiHV Shorty — a premium high-discharge racing battery built for domination. Engineered with Silicon Graphene technology, this pack delivers stable voltage, a flatter discharge curve, and long-term cycle performance — all in a low-profile shorty size perfect for 1/10 scale competitive setups. ⚙️ Features: ⚡ 140C Continuous Discharge – massive power delivery for serious racers 🔋 7.6V LiHV / 6000mAh Capacity – extended runtime and high-voltage performance 🔌 5mm Bullet Connectors – high-amp, secure connectivity 🪶 Shorty LCG Design – optimized for low center of gravity setups 🔬 Factory-matched cells for superior balance and reliability 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 6000mAh Continuous Discharge: 140C Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 47 x 25mm Weight: 220g (7.76oz) 🏁 For racers needing a perfect blend of raw power, extended runtime, and reliable heat management, the Gens Ace Redline 2.0 6000mAh Shorty delivers. Built for the podium.

Read more less

1up Racing LowPro Bullet Plugs + Grips – The Perfect Pairing for Clean Power Delivery 🔥 Take your wiring to the next level with the 1up Racing LowPro Bullet Plugs and Grips — the ultimate combo for pro-level installs and unmatched reliability. Designed for all LiPo batteries with 5mm inputs, this duo ensures a secure connection, minimal resistance, and a factory-finished look. ⚡ The LowPro Plugs feature a deep solder recess for clean joints with 11–16 gauge wire, while the Grips slide snugly into place, providing clear terminal ID and a stylish silver outer ring for superior grip and aesthetics. ✨ Key Features: 🔩 LowPro 5mm Bullet Plugs – Oversized 6-point contact for secure, low-resistance connection🧲 Deep Solder Recess – Quick, easy soldering with any 11–16 AWG wire🎨 Grips with Color ID – Instantly identify positive/negative terminals💪 Textured Outer Ring – Superior grip and eye-catching finish⚙️ Universal Fit – Works with all LiPo batteries using 5mm bullet inputs 📦 What’s in the Box? ✔️ (2) 1up Racing LowPro 5mm Bullet Plugs✔️ (2) Color-Grip Caps (Red + Black) 📌 Tip: Use a couple drops of CA glue to secure the grips after install! 💡 Wired to Win – Upgrade to 1up LowPro Bullet Plugs + Grips Today!  

Read more less

Precision Fit. Proven Strength. Upgrade your suspension geometry with the Team Associated Factory Team Aluminum 3-Gear Gearbox Arm Mount “C” Block. Designed for the RC10B7, B7D, T7, and SC7 platforms, this CNC-machined aluminum mount provides superior strength, precise alignment, and long-lasting durability under the toughest racing conditions. Factory-Grade Performance Engineered to maintain suspension integrity and reduce flex, this aluminum “C” block ensures consistent handling through high-speed corners and rough landings. Whether you’re chasing podiums or fine-tuning setup precision, this component delivers the reliability and performance serious racers expect from Team Associated. Features: CNC-machined aluminum construction for maximum rigidity and precision fit Designed for 3-gear gearbox setups Improves consistency and handling through rough terrain Factory Team engineering for professional-grade reliability Direct replacement for stock “C” block Includes: (1) Aluminum 3-Gear Gearbox Arm Mount “C” Block Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D Team Associated RC10 T7 Team Associated RC10 SC7 Team Associated Factory Team — Engineered to Win.

Read more less

The XRAY XB4 2022 Composite Battery Clamp Set is a direct replacement designed to securely hold your battery in place during the most demanding race conditions. Molded from durable composite material, these clamps offer a lightweight and reliable solution while maintaining the factory fit and finish. Features: Precision-molded composite construction Lightweight and durable design Direct fit replacement for the XRAY XB4 2022 Ensures secure battery retention under racing stress Includes:(2) Composite Battery Clamps        

Read more less

  Power your precision RC builds with the Futaba 4PM Plus, a 4-channel radio system offering industry-leading reliability and features. Paired with the R304SB‑E telemetry-enabled receiver, this combo delivers low-latency performance, fine control, and telemetry feedback—perfect for high-end cars, boats, and surface vehicles. 🎯 Key Features Futaba T‑FHSS 2.4 GHz Modulation: Ultimate signal stability and ultra-low latency 4PM Plus Transmitter: Sleek, ergonomic form factor with a full-color display and intuitive button layout Built-in Telemetry: Monitor battery voltage, temperature, signal quality, and more in real time Multi-Model Memory: Store up to 40 models with easy menu navigation Eight-Way End-Point Adjust, Adjustable LED Lighting, Dual Rates & Expo 📦 What’s Included (1) Futaba 4PM Plus Radio Transmitter (1) R304SB‑E Telemetry Receiver (1) Futaba Neo™‑T Stick (Right-hand) (2) Studio‑Style Recess Covers User Manual ⚙️ Specifications Feature Specification Range Full-range 2.4 GHz Channels 4 (expandable via mixing) Model Memory Up to 40 models User Interface High-contrast color screen Telemetry Compatible with S.Bus equipment Power 6x AA batteries or rechargeable Button Layout 6 customizable switches Elevate your control precision with Futaba’s trusted tech—perfect for the racer or enthusiast who demands tight response, full telemetry integration, and serious reliability. 🚀

Read more less

Experience unmatched power and consistency with the NitroPro 2S 7.4V 8500mAh 140C Low-Profile Stick Pack. Built from the highest-grade proprietary cells available, this battery delivers blistering acceleration, rock-solid voltage retention, and the endurance top racers demand. 🔥 Key Features: High-output 140C continuous discharge for extreme performance Constructed from premium proprietary LiPo cells — maximum punch and reliability Low-profile stick pack design for optimal chassis balance Consistent voltage under heavy load for competitive racing conditions Built to exceed the demands of professional-level drivers ⚙️ Specifications: Voltage: 7.4V (2S) Capacity: 8500mAh Discharge Rate: 140C Dimensions: 25mm (H) x 47mm (W) x 139mm (L) Connector: 5mm bullets Weight: 319g 📦 Includes: (1) NitroPro 2S 7.4V 8500mAh 140C LP Stick Pack 🛡️ Warranty: 90-day manufacturer’s warranty against defects ⚠️ Tip:Balance-charge every cycle and avoid over-discharging (keep cells above 3.2V) for maximum performance and lifespan.

Read more less

Push performance to the limit with this 2S 7.4V 6500mAh 160C Low-Profile Stick Pack, engineered with the best proprietary LiPo cells available. Designed for racers who demand the absolute maximum in power delivery, voltage consistency, and reliability, this pack delivers explosive acceleration with cool, stable performance. 🔥 Key Features: High-output 160C discharge rating for extreme current delivery Built with premium proprietary LiPo cells — top-tier performance and reliability Low-profile stick pack design for improved weight balance Ideal for high-demand race setups and competition use Precision-matched cells for consistent voltage under load ⚙️ Specifications: Voltage: 7.4V (2S) Capacity: 6500mAh Discharge Rate: 160C Dimensions: 22mm (H) x 47mm (W) x 139mm (L) Connector: 5mm bullet Weight: 279g 📦 Includes: (1) 2S 7.4V 6500mAh 160C LP Stick Pack 🛡️ Warranty: 90-day manufacturer’s warranty against defects ⚠️ Tip:Always balance charge and monitor pack temperature during use. Avoid over-discharging — maintain cells above 3.2V for best longevity.

Read more less

Unleash extreme power and efficiency with the Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery. Engineered for competitive RC racing, this pack combines massive capacity, ultra-low internal resistance, and a high 140C discharge rate to deliver stable voltage, explosive acceleration, and unmatched endurance. Perfect for racers who demand consistent performance through the entire run. 🔥 Key Features: High Voltage (LiHV) 7.6V output for maximum speed and power 140C continuous discharge for exceptional punch and consistency 8500mAh capacity delivers long runtime and balanced weight Factory-matched cells for uniform voltage, capacity, and resistance Low IR design ensures stable voltage under heavy load 5mm bullet connectors provide secure, low-loss connections Built using stable automatic stacking technology for reliability Lightweight and low-profile design for chassis balance and fit 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 8500mAh Continuous Discharge: 140C Charge Rate: 1C (8.5A max recommended) Configuration: 2S1P Watt Hours: 64.4Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 139 × 47 × 25mm Weight: 10.65oz (302g) ✅ Compatibility: Ideal for 1/10 & 1/8 scale surface applications Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher racing platforms Works with Touring Car (TC6/TC7 series), 4WD Buggies, Truggies, and Short Course Trucks requiring 2S packs 📦 Includes: (1) Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always balance charge using a LiPo-compatible charger and LiPo safe bag. Never leave charging batteries unattended. Do not overcharge or discharge below 3.2V per cell. Allow batteries to cool completely before recharging. Follow proper break-in procedure for new packs (first 5 cycles at 50% discharge). 🏎️ Recommended For: 1/10 & 1/8 scale Buggy, Truggy, Touring Car, and Short Course Truck racing Ideal for spec and modified classes needing high voltage and long runtime

Read more less

Experience uncompromising power and consistency with the Gens Ace Redline 2.0 2S Shorty LiHV Battery. Designed for high-performance racing, this pack delivers exceptional punch, low internal resistance, and stable voltage from start to finish. Perfect for 1/10 scale off-road, on-road, and touring applications where balance and efficiency are critical. 🔥 Key Features: High Voltage (LiHV) 7.6V design for increased power output 140C discharge rate for explosive acceleration and sustained punch 5300mAh capacity delivers both power and endurance Factory cell matching ensures maximum performance and consistency Low internal resistance (IR) for stable voltage under load Compact shorty pack size for ideal chassis weight distribution 5mm bullet connectors for secure, low-resistance connections Built with stable automatic stacking technology and strict cell matching Lightweight and low-profile design for racing efficiency 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 5300mAh Continuous Discharge: 140C Charge Rate: 1C (5.3A max recommended) Configuration: 2S2P Watt Hours: 40.28Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 96 × 47 × 22.5mm Weight: 7.02oz (199g) ✅ Compatibility: Ideal for 1/10 scale off-road and on-road racing Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher chassis setups Compatible with Touring Car (TC6/TC7) platforms and other vehicles using 2S shorty packs 📦 Includes: (1) Gens Ace Redline 2.0 2S Shorty LiHV 5300mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always use a LiPo-compatible charger — never charge unattended. Always balance charge and use a LiPo Safe charging bag. Do not overcharge, over-discharge, or store above 35°C. Allow battery to cool before recharging after use. For best cycle life: charge fully before first use and discharge only 50% for first 5 cycles. 🏎️ Recommended For: 1/10 Scale Buggy, Stadium Truck, Short Course Truck, and Touring Car racing Perfect balance of voltage, runtime, and punch for both spec and modified classes

Read more less

Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty – High-Performance, Low-Profile Power! Maximize your racing potential with the Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty HV-LiPo, engineered with cutting-edge advancements in LiPo cell manufacturing and battery construction. Designed for elite on-road and off-road competition, this battery delivers higher power output, lower internal resistance, and increased durability, ensuring consistent voltage from start to finish. Key Features: ✅ State-of-the-Art LiPo Chemistry – Improves efficiency, reliability, and power output.✅ High-Voltage (HV) 7.6V Design – Safely charges to 4.35V/cell for maximum performance.✅ Flat Discharge Curve – Sustains higher voltage deeper into the race for consistent power delivery.✅ High Capacity & 135C Discharge Rate – Delivers explosive acceleration and extended runtime.✅ Durable Hard Case – Protects against damage in high-impact racing environments.✅ Low-Resistance Embedded Connectors – Minimizes power loss for peak efficiency.✅ ROAR & BRCA Approved – Legal for competitive racing.✅ Male ESC Connectors Included – Ensures plug-and-play compatibility. Precision Power for Competitive Racing! 🏁 Why Choose the Reedy Zappers SG6 4000mAh? Low-profile (LP) design for better weight distribution and improved handling. Higher voltage retention throughout the race ensures stronger acceleration and consistent performance. Ideal for both on-road & off-road racing, including 1/8 eBuggy and 1/10 scale competition. Proven durability and extended cycle life for long-lasting, race-winning performance. 🔥 Race with confidence using the Reedy Zappers SG6 – built for champions! Specifications: Capacity: 4000mAh Voltage: 7.6V (2S) Max Charge Rate: 8.0A Discharge Rate: 135C Dimensions: 95.8mm x 46.8mm x 18.5mm Weight: 162g Socket: 5mm Bullet Connectors In the Box: (1) Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty HV-LiPo Battery (1) Set of Male ESC Connectors Race-Proven Power & Reliability! The Reedy Zappers SG6 4000mAh 135C LP Shorty is designed for racers demanding high-voltage, low-profile performance. Whether you're competing in tight indoor tracks or wide outdoor circuits, this power-dense battery delivers the speed, consistency, and durability needed to win. 🔥 Upgrade your setup today and experience next-level power with Reedy Zappers SG6! 🏁💨

Read more less

Keep your chassis protected and looking sharp with the Exalt Branded Chassis Protector for the XRAY XB4 2025. Made from premium polymetric print media with a high-tack adhesive, this protector guards your chassis from scratches, wear, and debris while offering a clean professional finish. Pre-cut for perfect fitment, installation is as simple as peel, stick, protect — no trimming required. 🔥 Key Features: Designed specifically for the XRAY XB4 2025 Premium polymetric print media with solvent-based adhesive 13.2 mil thickness for durability and clarity Protects chassis from scratches, scuffs, and wear Pre-cut for easy peel-and-stick application Removes cleanly without messy residue Exalt branded graphics for a professional look ✅ Compatibility: XRAY XB4 2025 1/10 4WD Buggy 📦 Includes: (1) Exalt XB4 2025 Chassis Protector ⚠️ Tip:Replace protectors regularly to keep your chassis clean and extend life between rebuilds.

Read more less

Dial in your suspension with Team Associated’s Factory Team 13mm shock pistons. The #91933 set features 2x1.7mm holes with a 2.5mm thick profile, providing a great tuning option for refining pack and rebound on modern high-performance off-road tracks. 📦 Includes: (2) FT 13mm Shock Pistons – 2x1.7mm hole layout 2.5mm thick ⚙️ Key Features: CNC-machined for ultra-precise damping consistency Designed for 13mm shock bodies used on AE’s latest platforms Ideal for high-traction surfaces needing tighter shock control Compatible with RC10B6.4, RC10B74.2, and similar vehicles 📌 Tuning Tip: Use 2x1.7mm pistons to increase damping over 2x1.8mm, providing more pack and control in bumpy or high-speed corners.

Read more less

Upgrade your RC10B74's steering performance with the 9-degree Caster Blocks from Team Associated. Designed for precision and durability, these caster blocks deliver improved cornering stability and increased on-power steering response. 🛠️ Key Features: 9° caster angle for improved handling characteristics Factory Team quality with tight manufacturing tolerances Durable composite construction Direct fit for RC10B74 front suspension 📦 Includes: (1) Pair of 9° Caster Blocks (left & right) ✅ Compatibility: Team Associated RC10B74 and variants (check manual for specific fitment) Ideal for racers looking to fine-tune front-end geometry to suit different track conditions. A must-have tuning option for competitive setups.

Read more less

Fine-tune your RC10B74.2’s rear suspension geometry with this Rear Gearbox Adjustable Height Insert Set. Whether you're dialing in anti-squat or adjusting rear drive angles, these inserts give you the flexibility to get the most out of your setup. 📌 Key Features: Precision-molded plastic insert set Allows for rear gearbox height adjustment Fine-tune rear suspension geometry and anti-squat Designed specifically for RC10B74.2 and RC10B74.2D platforms 📦 Includes: Multiple insert pairs for adjustable configurations Designed to work with standard rear gearbox components ✅ Compatibility: RC10B74.2 RC10B74.2D Ideal for racers looking to squeeze out extra performance on varying track conditions — essential for serious 1/10 4WD competition setups.

Read more less

Keep your drivetrain dialed in with the Factory Team Decoupled Slipper Thrust Bearing Rebuild Set for the RC10B74.2. Designed specifically for the decoupled slipper assembly, this kit includes everything needed to service the thrust bearing for smooth operation and consistent performance on the track. 📌 Key Features: Genuine Team Associated Factory Team part Restores slipper clutch smoothness and reliability Precision components for minimal friction Essential for regular maintenance of decoupled slipper setups 📦 Includes: Complete thrust bearing rebuild components (washers, balls, etc.) Enough to fully service one decoupled slipper thrust bearing assembly ✅ Compatibility: RC10B74.2 with Factory Team Decoupled Slipper System

Read more less

Team Associated RC10B74.2 FT Center Dogbone Blades (Part #92374) Keep your drivetrain running smooth and efficient with the Factory Team Center Dogbone Blades for the RC10B74.2. These precision-machined blades are engineered to reduce friction, minimize wear, and provide consistent performance under extreme racing conditions. A must-have for serious 1/10 4WD racers looking to maintain their competitive edge. 📌 Key Features: Genuine Factory Team upgrade Designed specifically for center dogbones Reduces friction and drivetrain wear Improves longevity and performance Lightweight and durable material 📦 Includes: (4) Center Dogbone Blades ✅ Compatibility: Team Associated RC10B74.2 RC10B74.2D May also fit other B74 variants with center dogbone setup

Read more less

Upgrade your steering setup with the Team Associated Factory Team +1 Steering Block Arms, designed to improve cornering response and handling consistency. These +1mm arms provide a subtle but impactful change to the steering geometry, offering increased tunability for your RC10B74 series buggy—especially on smooth or high-traction tracks. 📌 Key Features: +1mm length for refined steering characteristics Factory Team precision upgrade Durable, CNC-machined composite construction Ideal for racers tuning for surface-specific handling 📦 Includes: (1) Left Steering Block Arm (+1) (1) Right Steering Block Arm (+1) ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2

Read more less

The Team Associated Factory Team Steering Block Arms +2 are a precision upgrade for your RC10B74 series vehicle. With a 2mm longer length than stock, these arms enhance steering geometry for improved handling and tuning options—especially beneficial on high-bite surfaces where extra steering stability is critical. 📌 Key Features: +2mm longer for refined steering geometry Factory Team upgrade for precision fit and durability CNC-machined for consistent performance Ideal for tuning your RC10B74.2 to specific track conditions 📦 Includes: (1) Left Steering Block Arm (+2) (1) Right Steering Block Arm (+2) ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2

Read more less

Overview:Secure your rear wing with confidence using the Team Associated RC10B84 Wing Mount Set. Designed for strength and precision, this set provides the perfect fit to keep your wing stable under high loads and during hard landings. A must-have replacement or upgrade to ensure consistent aerodynamics and handling for your B84 buggy. Features: Complete rear wing mount set for the RC10B84 Strong molded construction for durability Maintains wing stability and aero balance under race conditions Genuine Team Associated factory part for perfect fit Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Wing Mount Set (all required mounting components) Part Number: 92506 ⚡ Pro Tip: Pair this with the Factory Team adjustable wing (92366) to fine-tune downforce and stability for different track conditions.

Read more less

Overview:Maintain precise steering response with the Team Associated RC10B84 Steering Links & Pivot Ball Sockets. Designed as genuine factory replacements, these parts restore proper geometry and eliminate unwanted slop when your originals show signs of wear. Perfect for racers who demand consistent handling and durability from their B84. Features: Complete set of steering links and pivot ball sockets Molded to factory specs for perfect fitment Durable construction withstands the demands of racing Direct replacement for worn or damaged parts Genuine Team Associated replacement part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (2) Steering Links (4) Pivot Ball Sockets Part Number: 92523 ⚡ Pro Tip: Combine these with the RC10B84 turnbuckle set (92558) for a fully refreshed and precise steering assembly.

Read more less