The XRAY Composite 48P Slipper Eliminator Spur Gear is a precision-molded 72-tooth spur designed for racers who prefer maximum efficiency and direct power delivery. By eliminating the slipper assembly, this gear reduces rotating mass and ensures a more consistent throttle response, making it ideal for high-traction surfaces where a slipper is not required. Features: 48 pitch, 72-tooth composite spur gear Eliminates slipper clutch for direct drive efficiency Lightweight, precision-molded construction Delivers consistent throttle response Perfect for high-traction racing conditions Includes:(1) 72T Slipper Eliminator Spur Gear      

Read more less

The XRAY XB2 Composite Idler Gear is the direct replacement 25-tooth idler gear for the XB2 1/10 scale buggy. Precision molded for durability and smooth drivetrain operation, this gear keeps your XB2 running strong with consistent performance. Features: Genuine XRAY replacement part Composite construction for strength and low wear Smooth, efficient power transfer 25-tooth idler gear Compatibility: XRAY XB2 1/10 Buggy Includes: (1) 25T Composite Idler Gear  

Read more less

🔥 Big Power. Small Footprint.The Team Exalt 110W Digital Soldering Iron packs serious heat in a travel-friendly design. With lightning-fast heat-up, digital precision, and a built-in safety shutoff, this is your go-to soldering tool whether you’re at the track or at the bench. ⚡ Features: 110W power output for rapid heat-up Digital display with °F/°C readout Auto safety shutoff & sleep timer Ceramic heater with platinum temp sensor Plug-and-play AC design—no base station needed Compact, portable, and ready to travel 💡 Built for RC racers, builders, and field techs who demand pro-level performance in a portable package.

Read more less

🔥 Pure Performance in Every Joint.Step up your soldering game with PUREFUSION™—the elite, lead-free solder designed for high-performance RC, drone, and electronics work. This Sn99.3Cu0.7 alloy delivers ultra-low resistance, superior flow, and a clean, consistent melt for pro-level connections every time. 🧪 Specs: Alloy: Sn99.3Cu0.7 (Lead-Free) Diameter: 1.0mm Flux Core: Rosin, No-Clean Melting Point: ~227°C Conductivity: Optimized for high-current, low-loss joints Residue: Minimal & non-corrosive 🛠️ Includes: 15g compact travel tube – ideal for pit bags, toolboxes, and field kits 💡 Why PureFusion? Ultra-low oxidation Superior wetting & flow Designed for clean, professional results—no mess, no compromise 💥 Whether you're rewiring on the bench or fixing in the field, PUREFUSION keeps your connections solid and your builds clean.  

Read more less

Team Associated RC10B7 Aluminum Hub Link Mounts (+1mm) – Precision Rear Geometry Upgrade 🔧 Fine-tune your rear suspension geometry with the Team Associated RC10B7 Aluminum Hub Link Mounts (+1mm). These mounts offer a +1mm vertical adjustment to the hub link position, helping you dial in rear traction and handling response. Built from lightweight aluminum for durability and performance, they’re a great replacement or upgrade for your RC10B7 or RC10B7D. 🔧 Key Features: ✅ CNC-machined aluminum construction for strength and precision✅ +1mm hub link height adjustment for fine-tuned handling✅ Direct replacement for stock hub link mounts✅ Easy installation for race-day tuning 📦 Includes: (2) Aluminum Hub Link Mounts (+1mm) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Enhance your rear suspension setup with lightweight adjustability.Upgrade to these +1mm aluminum hub link mounts and take control of your rear-end feel! 🏁

Read more less

💥 Domed for Performance. Bleeder for Precision.Upgrade your suspension with the TLR Aluminum G3 Domed Bleeder Shock Caps, engineered for racers who demand consistent damping, better landings, and refined tuning. These precision CNC-machined aluminum caps are lightweight, durable, and a direct fit for G3 shock bodies found in the 22 5.0 AC, DC, SR, Elite, and 22X-4 kits. 🔧 Features: Domed internal shape mimics Gen2 caps for better shock action Enhanced support and improved landing characteristics Integrated bleeder design allows precise, mess-free bleeding CNC-machined aluminum for strength without the weight Fits G3 shock bodies used in 22 5.0 & 22X-4 platforms 📦 Includes: (2) Domed Bleeder Shock Caps Bleeder screws and seals (pre-installed) 💪 Whether you’re dialing in for high traction or big jumps, these caps give your suspension the edge it needs to perform at its best.

Read more less

🛠️ Built to Handle the Power — Complete Drop-In DifferentialUpgrade or replace your worn-out diff with the TLR 22X AC Complete Gear Differential Set, precision-built for racers who demand maximum traction and bulletproof reliability. Pre-filled with 200,000cs diff fluid and ready to install, this complete assembly is the perfect performance refresh for your 22X platform. 🔧 What’s Inside: (1) Differential Case (2) Cross Pins (2) Outdrives (2) Sun Gears (4) Spider Gears (2) Pins (2) Gaskets (2) Washers (4) O-Rings (4) Button Head Screws (1) Bottle of 200,000cs Differential Fluid ✅ Compatibility:• Losi 22X• Losi 22X-T 🏁 Whether you’re prepping for race day or tuning for traction, this complete gear diff gets you dialed in fast!

Read more less

💥 Cut Weight. Gain Speed. Dominate the Track.The TLR 22X Titanium Slipper Top Shaft Screw is a small upgrade that delivers a big performance edge. Precision-machined from ultra-lightweight titanium, this screw weighs about 50% less than stock—reducing rotating mass and lowering the center of gravity for sharper handling, faster acceleration, and maximum on-track control. 🔧 Key Features: Ultra-lightweight titanium construction ~50% lighter than stock screw Reduces rotating mass for quicker response Lowers CG for improved stability and cornering Precision fit and finish Built for serious racing performance 📦 Includes: (1) Titanium Slipper Top Shaft Screw ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Upgrade your suspension with Team Losi Racing's 5.8mm Titanium Ball Studs. These precision-machined components are built from ultra-lightweight, high-strength titanium to deliver maximum performance with minimal weight—ideal for racers chasing every competitive edge. 🔧 Features: Machined from lightweight titanium for reduced weight Corrosion-resistant for long-lasting performance 5.8mm ball with 6mm thread length Hex-compatible head for easy installation and adjustment Perfect for fine-tuning suspension geometry under high loads 📦 Includes: (2) 5.8mm Titanium Ball Studs (6mm thread) ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Step up your racing game with these Stiffezel Front Suspension Arms for the TLR 22X! Engineered for high-performance racers, these arms provide increased stiffness and durability to enhance cornering, reduce flex, and maximize your control on high-bite tracks. 🔥 Features: Precision-engineered for the TLR 22X platform Stiffezel material delivers superior rigidity over stock arms Sharper steering response and enhanced high-speed handling Reduced flex = more precise suspension feel Perfect for traction-rich surfaces 📦 Includes:(2) Stiffezel Front Suspension Arms ✅ Compatibility:• TLR 22X• TLR 22X-4• TLR 22X-4 Elite• Losi 22S Sprint  

Read more less

Team Associated RC10T6.2 Carbon Fiber +1mm Steering Arm (2) – 71144Upgrade your steering precision with these lightweight +1mm carbon fiber arms from Team Associated. Originally made for the RC10T6.2, but may also fit newer models (check compatibility). ✅ Carbon Fiber Construction – Lightweight and durable✅ +1mm Offset – Provides fine-tuned steering response✅ Direct Replacement – Easy bolt-on upgrade 📦 Includes:(2) +1mm Carbon Fiber Steering Arms Perfect for racers looking to sharpen handling and dial in front-end feel.

Read more less

Team Associated 4mm Factory Team Heavy Duty Titanium Ball Stud Set (2) (91750)Upgrade your RC ride with strength and precision! The Team Associated Factory Team 4mm Heavy Duty Titanium Ball Stud Set offers superior durability with lightweight performance. Perfect for high-stress suspension points where reliability matters most. Includes: (2) 4mm Heavy Duty Titanium Ball Studs Factory Team Quality — Trusted by Pros!

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated RC10B7/RC10B7D Laydown Gearbox – Precision Replacement for 2WD Performance! 🔧 Keep your buggy in top form with this genuine replacement Laydown Gearbox Housing for the Team Associated RC10B7 and RC10B7D. Designed specifically for the 2WD platform, this gearbox delivers the durability, fit, and reliability you expect from Team Associated — straight from the Factory Team lineup. ⚙️ Key Features: ✅ Official Team Associated replacement part✅ Designed for laydown transmission configuration✅ Ensures proper gear mesh and alignment✅ Molded for durability and exact fitment✅ Ideal for maintenance, rebuilds, or spares 📦 Includes: (1) Laydown Gearbox Housing ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Maintain top-tier performance with factory-spec reliability.Team Associated—trusted by champions. 🏁🔩

Read more less

Team Associated RC10B7 Top Plate & Ballstud Mount Set. This replacement set is intended for the Team Associated RC10B7 1/10 buggy. Package includes one top plate and one ballstud mount. COMPATIBILITY: Team Associated RC10 B7 OriginalTeam Associated RC10 B7D

Read more less

Team Associated Factory Team 13mm 2.5mm Shock Pistons (2x1.9mm) – Fine-Tune Your Suspension! 📈 Dial in your shock performance with the Team Associated Factory Team 13mm 2.5mm Shock Pistons (2x1.9mm). These precision-machined pistons are ideal for customizing your shock's rebound and compression characteristics, allowing racers to adapt to various track conditions and driving styles. 🔧 Key Features: ✅ 13mm piston diameter with 2x1.9mm holes✅ 2.5mm thickness for controlled oil flow✅ CNC-machined for consistent performance✅ Ideal for tuning shock response and rebound speed✅ Factory Team quality for precision suspension setups 📦 Includes: (2) 13mm Shock Pistons (2x1.9mm, 2.5mm thick) ✅ Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D Team Associated RC10 B6.4 Team Associated RC10 B6.4D Team Associated RC10 B74.2 Team Associated RC10 B74.2D Team Associated RC10 B74.2 CE 💡 Precision matters.Upgrade your suspension tuning with these Factory Team pistons for the ultimate in control and consistency. 🏆  

Read more less

Team Associated RC10B7 HD CVA Bone (2) (69mm) [92454] 💥 Heavy Duty for Heavy HitsBuilt to handle the heat of hardcore racing, these 69mm HD CVA Bones are the perfect upgrade or replacement for your RC10B7 or B7D. Designed for durability and smooth power transfer, they’ll keep your buggy ripping lap after lap. 🔧 Upgrade Highlights:✅ Heavy-duty design for increased strength and longevity⚙️ 69mm length—direct fit for RC10B7/B7D🛠️ Precision-machined for consistent performance 📦 Includes:(2) 69mm HD CVA Bones 🔩 Part Number: 92454🚗 Compatible With: Team Associated RC10B7 Team Associated RC10B7D

Read more less

Team Associated RC10B7 Shock Tower Covers & Upper Wing Mount [92487] 💥 Upgrade your B7 with Precision Fit & Factory Style!Keep your buggy looking factory fresh and race-ready with the Team Associated RC10B7 Shock Tower Covers & Upper Wing Mount. Designed specifically for the RC10B7 platform, this set adds clean protection for your shock towers while locking down your rear wing with a durable, lightweight upper mount setup. 🏁 Why You’ll Love It:✅ Direct fit for the B7 platform—no mods needed🛡️ Protects your shock towers from dirt, debris, and damage🚀 Lightweight upper wing mount keeps your wing locked and stable🔩 Includes all the hardware you need—bolt it on and go! 📦 Includes:(2) Front Shock Tower Covers(1) Rear Shock Tower Cover(1) Upper Wing Mount SetMounting Hardware 🛠️ Part Number: 92487🏎️ Vehicle Compatibility: Team Associated RC10B7  

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Buggy Tires (2) — C4 Red (Soft Compound)Part #: 3090-C4 Dialed for Grip. Designed to Win. The Pro-Motion Viper 2.2" Low-Profile (LP) Rear Buggy Tire is built for next-level performance on high-traction carpet and turf tracks. The LP carcass reduces sidewall flex for improved stability, while the directional tread with tapered mini pins delivers smooth, predictable traction. C4 Red compound brings the extra softness needed for maximum bite in low-grip or cooler conditions. ✅ Low-profile design for reduced flex and razor-sharp response✅ C4 Red soft compound optimized for maximum traction✅ Dual mini wedge edges + radial rib for stable, consistent grip✅ Directional tread for tunable performance✅ Ideal for modern carpet and turf racing 📦 Includes:(2) Viper 2.2" Rear LP Tires(2) Black Closed Cell Inserts 💡 Pro Tip: Run C4 in colder conditions or low-grip indoor tracks to bring your setup to life.

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Pre-Mount Buggy Tires (2) — Yellow (C3 Green/Medium)Part #: 3090-C3-Y Low-Profile Speed. Carpet-Tuned Control. Engineered for precision, the Pro-Motion Viper 2.2" LP Rear Buggy Tire is built to dominate on high-traction carpet and turf tracks. With a low-profile carcass for reduced sidewall flex and quicker response, the Viper delivers unmatched stability and cornering grip. Its tapered pin tread and directional radius pattern provide predictable traction, while mini wedges and a radial rib add versatility across various conditions. ✅ Pre-mounted on yellow wheels—ready to race✅ Low-profile carcass enhances response and stability✅ Tapered mini pin design for maximum grip✅ Directional tread for fine-tuned traction control✅ Designed for 1/10 scale carpet and turf racing✅ C3 compound for medium traction balance 📦 Includes:(2) Viper LP Rear Pre-Mounted Tires(2) Foam Inserts 💡 Pro Tip: Combine with Pro-Motion Slim Front LPs for a fully dialed-in carpet setup.

Read more less

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31388Dial In Wheelbase. Precision You Can Stack. The Team Associated 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers (31388) are a smart tuning tool for adjusting wheelbase and hub spacing on RC8B3, RC8T3, and any 1/8 vehicle using 3.5mm hinge pins. These durable, lightweight aluminum spacers help you fine-tune geometry for track conditions or personal preference. ✅ Size: 7.8mm OD x 3.5mm ID x 1.0mm thick✅ CNC-machined blue anodized aluminum – race-grade durability✅ Used for hub spacing and wheelbase tuning✅ Fits RC8B3, RC8T3, and any vehicle with 3.5mm hinge pins✅ Perfect for stacking with .5mm or 2.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers Part #: 31388 💡 Pro Tip: Fine-tuning wheelbase can impact rear grip, stability, and overall cornering behavior—stack accordingly for your surface.  

Read more less

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washers – Blue (10) – Part 31387Fine-Tune Wheelbase. Maximize Setup Precision. The Team Associated 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers (31387) are perfect for adjusting wheelbase and tuning suspension geometry on vehicles with 3.5mm hinge pins. Commonly used on the RC8B3 and RC8T3 series, these lightweight spacers are also compatible with other platforms that accept 3.5mm hinge pins. ✅ Pack of 10 high-precision spacers✅ Size: 7.8mm OD x 3.5mm ID x 0.5mm thick✅ Blue anodized aluminum – lightweight and corrosion-resistant✅ Used for fine-tuning wheelbase and hub spacing✅ Compatible with RC8B3, RC8T3, and any vehicle using 3.5mm hinge pins✅ Also available in 1.0mm and 2.0mm thicknesses (sold separately) 📦 Includes: (10) 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers Part #: 31387 💡 Pro Tip: Stack different thicknesses to get the exact rear end length or toe-in setup you're after.

Read more less

Team Associated RC10B7 FT Ballstud Mount, Black Aluminum – ASC92478 Factory-Precision Suspension Mount for the RC10B7 The Factory Team Standard Height Ballstud Mount is a durable, performance-focused upgrade for your RC10B7 platform. Crafted from CNC-machined aluminum and finished in stealth black, it delivers consistent rear camber link geometry with improved strength and tuning potential. ⚙️ Features: ✅ Standard Height – Maintains factory camber link geometry ✅ CNC-Machined Aluminum – Lightweight and built to last ✅ Black Anodized Finish – Sleek and stealthy Factory Team look ✅ Reliable Upgrade – Improves rear-end durability and tuning flexibility 📦 Includes: (1) Black Aluminum Ballstud Mount (Standard Height) Mounting hardware ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7 🏁 A must-have for racers seeking durable, factory-style performance with a sleek, blacked-out look.

Read more less

Team Associated FT 3x35mm V2 TiN Shock Shafts – ASC91623 High-Performance Titanium Nitride Shock Shafts for #91579 Upgrade your suspension system with the 3x35mm Factory Team V2 TiN Shock Shafts, designed for use with #91579 truck rear shock bodies. Featuring a durable Titanium Nitride (TiN) coating, these shafts reduce friction and wear, delivering smoother and more consistent shock performance. ⚙️ Features: ✅ TiN coating for enhanced durability and ultra-smooth operation ✅ Screw-mounted piston design for secure, reliable assembly ✅ V2 shock shaft spec for modern Team Associated platforms 📦 Includes: (2) 3x35mm V2 TiN Shock Shafts ✅ Compatibility: #91579 – Truck Rear Shock Bodies Not compatible with E-clip pistons 🏁 Trusted Factory Team engineering — made to withstand the rigors of high-performance RC racing.

Read more less

Team Associated Aluminum Motor Mount – RC10B7 Precision Fit. Proven Durability. Upgrade your RC10B7 or B7D with this genuine Team Associated Aluminum Motor Mount, engineered for a secure motor install and optimal gear mesh. Made from high-quality aluminum, it offers improved strength and heat dissipation—perfect for high-performance builds. 🛠️ Features: CNC-machined aluminum construction Increased durability over stock components Optimized for heat dissipation and motor alignment Official Team Associated replacement part 📦 Includes: (1) Aluminum Motor Mount ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D ⚙️ Trust Team Associated parts to deliver race-ready performance with every install.

Read more less

Team Associated Differential Outdrive Shims (14pc) – RC10 B74 Precise Tuning for Your 4WD Drivetrain Optimize the fit and function of your RC10 B74 drivetrain with this Team Associated Differential Outdrive Shim Set. Designed as direct replacements for the kit-supplied parts, these precision shims allow you to fine-tune outdrive spacing and reduce slop for smoother, more efficient drivetrain performance. 🔧 Features: 🔩 Precision Tuning Parts – Designed to eliminate excess play in differential outdrives ⚙️ Direct Replacement – Ideal for use with the RC10 B74 1/10 4WD Buggy 🧷 Multiple Thicknesses – Mix and match to achieve perfect spacing 📦 Includes: (10) 0.1mm Outdrive Shims(4) 0.25mm Outdrive Shims COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Compatible with: XR10 PRO G2S Stealth / Max10 80A Keep your ESC cool under race heat with the Hobbywing G25 Stealth 2510BH-6V Frameless Cyclone Cooling Fan. Designed specifically for the XR10 PRO G2S Stealth and Max10 80A ESCs, this precision fan delivers high-RPM airflow with a frameless, low-drag design that maximizes efficiency and reduces noise. The G25’s compact profile fits tight racing setups while maintaining optimal heat management to protect critical electronics lap after lap. ⚡ Features: ✅ OEM replacement for Hobbywing XR10 PRO G2S Stealth and Max10 80A ESCs 🌪️ Frameless Cyclone Design provides superior airflow with minimal resistance 🔋 6 V operation for smooth, reliable cooling performance ⚙️ High-RPM brushless motor keeps ESC temperatures stable under load 💪 Compact 25×25×10 mm size for tight installations and low weight 🧠 Smart voltage guidance ensures proper pairing with your power system 📊 Specifications: Model: G25 Stealth 2510BH-6V Input Voltage: 6 V Size: 25 × 25 × 10 mm Design: Frameless Cyclone Recommended ESCs: Hobbywing XR10 PRO G2S Stealth, Max10 80A Weight: ≈ 10 g ⚙️ Voltage Selection Notes: 4–6 cell NiMH / 2S LiPo: Use included 5 V fan 7–9 cell NiMH / 3S LiPo: Use 12 V fan or power 5 V fan from receiver (+6 V) 10–12 cell NiMH / 4S LiPo: Use 12 V fan and external UBEC to power receiver 📦 Includes: (1) Hobbywing G25 Stealth 2510BH-6V Frameless Cyclone Cooling Fan 💡 Pro Tip:For the longest fan life, keep debris out of the blades and avoid running the fan when submerged or coated in tire compound dust — a quick blast of compressed air between runs keeps performance consistent.  

Read more less

Avid Oiler Pen | Empty [AV10135] Product Overview: The Avid Empty Oiler Pen gives you full control over your lubrication needs. Originally used for Avid Slip oil, this handy tool now comes empty—ready to be filled with your favorite lubricant. It features a precision 1" (25.4mm) long steel tip for clean and accurate application and holds up to 1/4oz (7.4cc) of fluid. A perfect companion for any RC tool kit or pit box. Features: Comes empty – fill with your preferred lubricant Precision 1" steel tip for controlled application Holds up to 1/4oz (7.4cc) of fluid Compact, pit-friendly size Includes: (1) Empty Avid Oiler Pen Part Number: AV-OIL-PEN

Read more less

Avid Slip Bearing Oil | High-Performance Teflon-Based Lubricant [AV10134] Product Overview: Slip into unmatched performance with Avid Slip Bearing Oil—now with a light blue tint! This ultra-premium Teflon-based oil is engineered to drastically reduce metal-on-metal friction, extend bearing life, and protect against rust and dirt. Put through rigorous third-party testing, Slip Bearing Oil has proven to outperform typical light oils with ease. The convenient oiler pen features a 1" steel precision tip, perfect for quick access to clutch or wheel bearings. Each pen contains 1/4oz (7.4cc) of high-efficiency lubricant—enough for over a year of racing use! Features: Teflon-based formula for extreme anti-friction performance Light blue tint for easy visual reference Reduces wear, repels dirt, and displaces moisture Ideal for clutch and wheel bearings Convenient oiler pen with 1" steel tip and protective cap 1/4oz (7.4cc) of oil lasts through countless applications Pro Tip:For clutch bearings, blow out factory grease before initial use. After each clutch inspection, wipe bearing clean and reapply 1 drop of Slip Bearing Oil for maximum life and performance. Includes:  • (1) Avid Slip Bearing Oil Pen

Read more less

⚙️ Quiet Strength. Precision-Engineered in the USA. The Avid RC Triad 72-Tooth Spur Gear delivers smooth, whisper-quiet performance and unbeatable strength — designed exclusively for the Avid Triad Slipper Clutch System. Each gear is made from Avid’s custom-blend, glass-free high-strength material, offering three times the impact resistance of Delrin while running noticeably quieter than traditional fiberglass-reinforced spurs. Perfectly balanced, true-spinning, and built to last — this is the gear serious racers trust. ⚡ Features: 🇺🇸 Made in the USA from Avid’s premium low-noise, high-strength composite (zero glass fibers) 🔇 Ultra-quiet operation with 3× the impact strength of Delrin 🌀 Precision 48-pitch tooth form ensures smooth, drag-free rolling 🎯 Center-point injection molded for perfect balance and true rotation — no wobble 🧩 Molded tooth count and setup indicators for easy identification and assembly 🔢 Marked with “1” and “2” for single- or dual-plate Triad clutch configuration 🧠 Designed exclusively for the Avid Triad Slipper Clutch System (Stock or Mod kits) 📏 Specifications: Pitch: 48P Tooth Count: 72T Compatibility: Avid Triad Slipper Clutch System Part Number: AV1020-72 Made in: USA 💡 Pro Tip:Use 72T for mid-range gearing — perfect balance between acceleration and top-end speed on most 1/10 2WD buggy and stadium-truck setups running a Triad slipper.  

Read more less

⚙️ Precision-Engineered Power. Made in the USA. The Avid RC Triad 69-Tooth Spur Gear is built exclusively for the Avid Triad Slipper Clutch System, delivering ultra-smooth, ultra-quiet performance with unmatched durability. Crafted from Avid’s custom-blend low-noise material, this gear eliminates the harsh sound of standard fiberglass spurs while offering three times the impact strength of Delrin — all in a perfectly balanced, true-spinning design. ⚡ Features: 🇺🇸 Made in the USA from a proprietary high-strength plastic — zero glass fibers for low noise and maximum toughness 🔇 Ultra-quiet operation with 3× the impact strength of Delrin 🌀 Precision 48-pitch tooth form provides smooth rolling and consistent mesh 🎯 Centerpoint injection-molded for perfect balance and true rotation 🧩 Number of teeth molded in for easy identification 🔢 Marked with “1” and “2” for single- or dual-plate Triad clutch setup compatibility 🧠 Designed exclusively for use with the Avid Triad Slipper Clutch System 📏 Specifications: Pitch: 48P Tooth Count: 69T Compatibility: Avid Triad Slipper Clutch System (Stock or Mod Kit) Part Number: AV1020-69 💡 Pro Tip:Keep a few different Triad spur sizes (66T–87T range) on hand so you can fine-tune your gearing for any track layout or motor setup.  

Read more less

🏁 Built to Win – Engineered for Precision The Avid Truss 2.2 Rear Buggy Wheels bring next-level design and performance to your 1/10 scale race setup. Every detail is optimized for durability, torque strength, and visual appeal — featuring Avid’s unique concave face and reinforced truss hex structure for maximum power transfer and style. Whether you’re running high-grip carpet or smooth clay, these lightweight wheels deliver consistent performance lap after lap. ⚡ Features: 💪 Truss reinforcement at the hex ensures maximum torque strength and stability through hard corners 🧱 Concave vertical face protects wheel nuts and axles while adding sleek visual depth 🌀 Six internal ribs minimize rotating mass and resist fatigue under heavy load 🧩 Low-profile inner bead ribs allow tire foams to flex naturally for better landings ✨ Textured glue bead and tapered outer face ensure clean, secure tire mounting 🔩 Reinforced wheel-nut area withstands aggressive serrated nuts 🌬️ Oversized 4mm vent holes provide smooth airflow—no drilling needed ⚙️ Standard 2.2" fitment for universal buggy tires 💡 Lightweight at just 17.5g per wheel to reduce rotating mass and improve acceleration 📦 Includes: (4) Avid Truss 2.2 Rear Wheels – White 📏 Specifications: Outer Diameter: 2.2” Hex Depth: 3.5mm (Standard Offset) Weight: 17.5g each Fitment: 1/10 2WD & 4WD Buggy Rear Part Number: AV1110 💡 Pro Tip:Pair these with Avid Truss 2.2 Front Slim Wheels (AV1112) for a complete, balanced wheel setup that looks as sharp as it performs.  

Read more less

🏁 Precision. Strength. Style. The Avid Truss 2.2 Buggy Front Slim Wheels set a new standard for performance and durability in 1/10 buggy racing. Designed for racers who demand precision and style, these wheels feature Avid’s signature concave truss face, optimized rib structure, and lightweight build for superior handling and torque strength. ⚡ Features: 🧱 Truss reinforcement at the hex delivers maximum torque strength and prevents flex under load 💥 Concave vertical face protects axles and wheel nuts from track impacts while giving a premium polished look 🌀 Six internal ribs reduce rotating mass and increase structural rigidity 🧩 Low-profile inner bead ribs let the foam absorb impact for smoother landings 🔩 Reinforced wheel-nut area withstands aggressive serrated nuts ✨ Textured glue bead for stronger tire bonds and cleaner mounting 🌬️ 2.5mm vent holes allow perfect airflow – no drilling needed ⚙️ Standard 2.2” fit for all 1/10 scale buggies 🎨 Available in White or Yellow 📦 Includes: (4) Avid Truss 2.2 Front Slim Wheels 📏 Specifications: Outer Diameter: 2.2” Hex Depth: 2.0mm (Standard Offset) Fitment: 1/10 2WD Buggy Front (Slim Tires) Part Number: AV1112 💡 Pro Tip:Pair these with Avid 2.2 Rear Buggy Wheels and your favorite clay or carpet tires for a perfectly balanced setup that shines on-track and in the pits.    

Read more less

Clean Power. Pro-Level Charging. Simplify your pit setup and maximize efficiency with the Team Exalt 2S Specialized Bullet ProCharge Cable. Built for serious racers and hobbyists alike, this precision-crafted cable delivers a neat, reliable, and safe connection for 2S LiPo battery charging — combining high-quality materials with professional-grade durability. Pro-Grade Construction Each ProCharge cable is hand-assembled with 12AWG main charge leads and 18AWG balance leads, paired with 4mm bullet charger connectors and 5mm battery bullet plugs for low-resistance, high-efficiency power delivery. The braided PET sleeve and self-sealing shrink tubing keep your setup organized and protected, ensuring performance that looks as good as it runs. Features: Custom 2S ProCharge cable designed for 4mm charger to 5mm battery bullets 12AWG charge leads and 18AWG balance leads for consistent current flow 2mm balance plug to 3-pin XH connector for standard 2S LiPo compatibility Braided PET sleeve for a clean, organized look Self-sealing shrink tube for a secure, durable finish Reduces pit clutter while maintaining professional-grade reliability Safe, efficient, and visually clean charging solution Specifications: Spec Detail Charger Connector 4mm Bullet Battery Connector 5mm Bullet Balance Connector 2mm to 3-pin XH Main Leads 12AWG Balance Leads 18AWG Includes: (1) Team Exalt 2S Specialized Bullet ProCharge Cable Team Exalt — Sleek Design. Solid Power. Perfect Connection.

Read more less

Charge Clean. Charge Confident. Upgrade your charging setup with the Team Exalt ProCharge 2S Specialized Charging Cable, designed for precision, durability, and a professional look at your pit station. Built for Junsi iCharger 456/458 Duo chargers, this premium cable ensures a clean, secure, and efficient charge for your 2S LiPo batteries. Professional-Grade Construction Each ProCharge cable is meticulously assembled with 12AWG charge leads and 18AWG balance leads, paired with high-quality XT90 and 5mm bullet connectors for consistent, low-resistance power delivery. A custom braided PET sleeve and self-sealing shrink tubing keep everything neat, organized, and protected from wear. Features: Custom-built 2S ProCharge cable for Junsi iCharger 456/458 Duo XT90 charger connector with 5mm battery bullets 12AWG main leads and 18AWG balance leads for reliable current flow 2mm balance plug to 3-pin XH connector Braided PET sleeve for a clean, professional finish Self-sealing shrink tube ensures durability and neat cable management Reduces pit clutter and promotes safe, organized charging Specifications: Spec Detail Charger Connector XT90 Battery Connector 5mm Bullet Balance Connector 2mm to 3-pin XH Main Leads 12AWG Balance Leads 18AWG Includes: (1) Team Exalt ProCharge 2S Specialized Charging Cable Team Exalt — Professional Power. Cleaner Charging.

Read more less