Dial in your front-end feel with precision balance and smoother steering control. The R1WURKS B7 Series 10g Front Ball Stud Mount Weight is a simple drop-in upgrade that adds stability, traction, and predictability to the nose of your buggy—especially in conditions where the front end needs extra bite. Why Add Front-End Weight? Adding a small amount of mass to the front of your buggy can: Increase front-end traction Improve initial steering response Enhance mid-corner stability Reduce front-end bounce for smoother handling Help balance overall weight distribution when paired with battery placement adjustments Features High-quality brass construction Precision CNC machining Engraved for quick identification True drop-in fitment for the R1WURKS B7 ball stud mount Included (1) 10g Brass Weight (1) M2.5x8 Button Head Screw  

Read more less

Overview:Boost suspension precision and durability with the Team Associated RC10B7 Aluminum Arm Mount "C Block". CNC-machined from high-quality aluminum, this upgrade improves rigidity in the rear suspension, keeping hinge pins aligned under extreme racing loads. With its blue anodized finish and Factory Team quality, it’s a reliable upgrade over the stock composite mount for racers who demand consistency and strength. Features: Precision CNC-machined aluminum construction Stronger and more rigid than stock composite mounts Maintains accurate hinge pin alignment for consistent suspension geometry Blue anodized finish with Factory Team looks Genuine Team Associated Factory Team upgrade Compatibility: Team Associated RC10B7 1/10 2WD Buggy May also fit other B7-based platforms (verify with manual) Includes: (1) Aluminum Arm Mount "C Block" Part Number: 92432 ⚡ Pro Tip: Pair the Aluminum "C Block" with the Aluminum "D Block" (92433) for a fully reinforced rear suspension setup that maintains geometry through the toughest conditions.

Read more less

Fine-tune your XB2 with this Graphite Composite Front Left Suspension Arm featuring Low Shock Mounting (LSM) geometry in the short configuration. The Graphite blend offers the perfect balance of rigidity and controlled flex, making it ideal for medium to high-traction tracks where precision and cornering speed are key. Features: Graphite composite material for optimized stiffness and responsiveness Low Shock Mounting (LSM) design improves suspension geometry and handling Short length design for sharper steering response Factory XRAY precision molding for perfect fit Compatibility: XRAY XB2 (All variants using LSM geometry) Includes: (1) Front Left Suspension Arm – Short – Graphite

Read more less

Boost your 22X’s performance and durability with this CNC-machined Aluminum Gear Differential Cover from Team Losi Racing. Designed for racers who push their cars to the limit, this cover eliminates flex, protects your diff, and helps manage heat during hard off-road runs. 🔧 Features: CNC-machined aluminum for precision fit Improves heat dissipation during high-load conditions Rigid construction reduces flex and enhances handling Long-lasting protection for your gear differential Lightweight and race-tested 📦 Includes: (1) Aluminum Gear Differential Cover (1) Gasket (1) Spacer ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Team Associated RC10B7 Factory Team Carbon Side Rails. Constructed from AE legendary carbon composite material, these optional side rails are intended for the Team Associated RC10B7 1/10 buggy to stiffen the chassis and eliminate flex as a tuning option for high bite surfaces. Package includes two side rails. COMPATIBILITY: Team Associated RC10 B7 OriginalTeam Associated RC10 B7D

Read more less

1up Racing Pro Duty Equipment Case – Built for the Track, Ready for Anything 🔧 Protect your gear like a pro with the 1up Racing Pro Duty Equipment Case – the ultimate storage solution for racers who value durability, organization, and style. Whether you're hauling tools, electronics, or spare parts, this case is engineered to keep your essentials safe and scratch-free. 💼 Featuring a rigid outer shell, dense internal padding, and six customizable dividers, this case adapts to your setup with ease. Impact-absorbing foam on the top and bottom adds next-level protection, while the internal compartments and zippered pouch keep everything neat and accessible. ✨ Key Features: 🛡️ Heavy-Duty Shell with Dense Padding – Keeps your tools, chargers, and electronics safe📦 Adjustable Dividers – 6 foam inserts for a fully customizable interior layout🧵 Durable Black Fabric Interior – Clean, professional finish inside and out🧰 4 Tool Pouches + Zippered Pocket – Store scissors, pliers, leads, setup sheets, and more🧩 Impact-Absorbing Foam (Top & Bottom) – Superior protection during transport 📏 Dimensions: Interior Space: 23 x 20 x 7.5cm\ Dividers Included:✔️ (1) 23cm Divider✔️ (2) 12.5cm Dividers✔️ (3) 6.5cm Dividers 🎯 Built to Travel. Designed to Organize. Whether you're trackside or organizing your pit area at home, the 1up Racing Pro Duty Equipment Case keeps your essentials secure, accessible, and race-ready. 💡 Organize Like a Pro – Grab Your 1up Equipment Case Today!

Read more less

Team Associated RC10B7 FT Ballstud Mount, Black Aluminum – ASC92478 Factory-Precision Suspension Mount for the RC10B7 The Factory Team Standard Height Ballstud Mount is a durable, performance-focused upgrade for your RC10B7 platform. Crafted from CNC-machined aluminum and finished in stealth black, it delivers consistent rear camber link geometry with improved strength and tuning potential. ⚙️ Features: ✅ Standard Height – Maintains factory camber link geometry ✅ CNC-Machined Aluminum – Lightweight and built to last ✅ Black Anodized Finish – Sleek and stealthy Factory Team look ✅ Reliable Upgrade – Improves rear-end durability and tuning flexibility 📦 Includes: (1) Black Aluminum Ballstud Mount (Standard Height) Mounting hardware ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7 🏁 A must-have for racers seeking durable, factory-style performance with a sleek, blacked-out look.

Read more less

Team Associated RC10B7 FT Ballstud Mount +2mm, Blue Aluminum – ASC92477 Precision Suspension Tuning for the RC10B7 The Factory Team +2mm Ballstud Mount is a premium upgrade for serious racers. Machined from lightweight aluminum and anodized in signature blue, this mount allows for fine-tuning of rear camber link geometry, improving handling and cornering stability on the track. ⚙️ Features: ✅ +2mm Height – Raises rear camber link mount for improved roll center adjustment ✅ CNC-Machined Aluminum – Durable and lightweight ✅ Blue Anodized Finish – Factory Team look and corrosion resistance ✅ Increased Setup Options – Perfect for dialing in rear-end grip and handling on high-traction surfaces 📦 Includes: (1) +2mm Blue Aluminum Ballstud Mount Mounting hardware ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🏁 Ideal for racers looking to fine-tune rear suspension geometry for high-performance setups.

Read more less

Team Associated RC10B7 FT Rear Hub Set, HRC, Blue or Black – 92473 / 92474Upgrade your RC10B7 with Factory Team aluminum HRC rear hubs – engineered for strength, precision, and tunability on high-grip tracks. These anodized blue or black hubs feature a high roll center (HRC) design to enhance handling, increased axle height adjustability, and a secondary bearing bore for use with FT universals. Built tough for serious racers who want consistency lap after lap. ✔️ CNC Aluminum for max durability✔️ HRC Design boosts handling on high-traction surfaces✔️ Supports higher axle heights and lower ride heights✔️ Compatible with Factory Team Universals✔️ Anodized in Blue (92473) or Black (92474)✔️ Includes left & right hubs plus mounting hardware✔️ Fits: RC10B7 & RC10B7D Race harder. Corner faster. Stay planted. 🏁  

Read more less

Team Associated FT 3x27.5mm V2 Chrome Shock Shafts – ASC91620 Smooth, Durable, Factory-Grade Suspension Parts Upgrade or replace your V2 shocks with the Factory Team 3x27.5mm Chrome Shock Shafts, engineered for exceptional performance and longevity. Designed specifically for #91577 buggy rear and #91578 truck front shock bodies, these shafts provide a precise fit with a low-friction chrome finish. ⚙️ Features: ✅ Chrome-coated for reduced stiction and increased durability ✅ Designed for secure screw-mounted piston setup ✅ Factory Team precision for consistent shock action ✅ Ideal for competitive racing environments 📦 Includes: (2) 3x27.5mm V2 Chrome Shock Shafts ✅ Compatibility: #91577 – Buggy Rear Shock Bodies #91578 – Truck Front Shock Bodies Not compatible with E-clip piston systems 🏁 Factory Team quality that keeps your ride smooth and race-ready!

Read more less

Team Associated RC10B7 Factory Team Aluminum Front Bulkhead (0°) Stronger. Straighter. Smarter. Upgrade your RC10B7’s durability and precision with the Factory Team Aluminum Front Bulkhead. Machined from high-quality aluminum with a zero-degree angle for optimal front-end geometry, this bulkhead is designed to withstand the rigors of competitive 1/10-scale racing. 🔧 Features: ✅ Factory Team Precision: CNC-machined aluminum for a tight, accurate fit ✅ Zero-Degree Angle: Delivers neutral front kick-up geometry ✅ Reinforced Design: Built to handle hard landings and aggressive racing ✅ Includes Set Screws: Complete package for quick installation 📦 Includes: (1) Aluminum Front Bulkhead (0°) (4) Set Screws 🔩 Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D 💪 Built for racers who demand strength and precision at the front end.🛞 Factory Team quality — because your buggy deserves the best.

Read more less

Built for competitive stock racing, the ProTek RC 2S 150C “Stock Spec” Shorty LiPo delivers consistent power, low internal resistance, and excellent efficiency from start to finish. Featuring advanced Si-Graphene cell technology, this pack provides strong punch, cooler operating temps, and reliable voltage throughout the entire run. The shorty-style design is perfect for modern 2WD and 4WD setups, offering improved weight distribution and flexibility in chassis tuning. With increased capacity and extended cycle life, this battery is a top choice for racers who demand consistent performance every lap. 🔧 Features:• 150C discharge rating for strong power and punch• Advanced Si-Graphene technology for low IR and efficiency• 5600mAh capacity for extended runtime• Shorty pack design for improved weight balance and setup options• Runs cooler with lower internal resistance• Designed for stock class racing performance• ROAR Approved for competition use 📦 Includes:• (1) ProTek RC 2S Shorty LiPo Battery• (2) 5mm Bullet Connectors ⚙️ Specifications:• Voltage: 7.4V (2S)• Capacity: 5600mAh• Discharge Rate: 150C• Max Charge Rate: 10C (56A)• Watt Hours: 41.44Wh• Connector: 5mm Bullet• Balance Plug: 2mm Bullet• Dimensions: 95.7 x 47.1 x 25.1mm• Weight: 224g (7.90oz) ⚠️ Battery Safety Notes:• Always use a LiPo-compatible charger• Balance charge only and never leave charging unattended• Do not overcharge or over-discharge (min 3.2V per cell)• Allow battery to cool before recharging• Use a LiPo safe charging bag or box For racers who need reliable power and consistent performance, the ProTek RC 150C Stock Spec Shorty LiPo delivers the voltage, efficiency, and durability to stay competitive from the first lap to the last.  

Read more less

Keep your drivetrain running smooth and protected with R1WURKS Black WS2 Grease. Specially formulated for high-performance RC applications, this grease is ideal for universal joints, dogbones, drive cups, and other high-load drivetrain components where reduced friction and long-lasting lubrication are critical. Infused with WS2 (Tungsten Disulfide) particles, this grease provides exceptional lubrication under extreme pressure while maintaining smooth performance even at elevated temperatures. ⚙️ High-Performance Drivetrain Lubrication The WS2 formula offers an extremely low coefficient of friction, helping drivetrain components operate more efficiently while reducing wear. With an impressive 300,000 PSI load-bearing capacity, it is designed to handle the heavy loads and impacts commonly experienced in RC racing and bashing. 🔧 Built for Extreme Conditions R1WURKS Black WS2 Grease is engineered to remain stable even in harsh environments. Its high dropping point allows it to stay fluid at high temperatures, preventing the grease from breaking down or solidifying during demanding runs. It also provides strong resistance against water, rust, and humidity, helping protect components from corrosion and long-term wear. ⚡ Features Designed for RC drivetrain components Ideal for dogbones, drive cups, and universal joints WS2 (Tungsten Disulfide) lubrication technology Extremely low coefficient of friction 300,000 PSI load-bearing capacity Excellent resistance to water, rust, and humidity High-temperature stability Resists abrasion and extreme pressure 📦 Includes (1) 3g Tube of R1WURKS Black WS2 Grease A must-have maintenance product for racers and builders looking to reduce drivetrain friction, protect components, and maintain peak performance.  

Read more less

Sticky Kicks RC is proud to introduce the Five Star Ceramic Bearing Sets, engineered for racers who want maximum efficiency, speed, and consistency in their 1/10 scale 2WD cars. If keeping your bearing game #superdialed matters, this is the upgrade. Built with Grade 5 ceramic components and designed to minimize resistance, these bearings deliver ultra-smooth rotation, quicker acceleration, and improved overall drivetrain efficiency—exactly what competitive racers demand. Product Details Designed for 1/10 scale 2WD racing cars Fits current Team Associated, Losi, and X-Ray platforms Lowest resistance, fastest rolling bearings available Grade 5 ceramic construction Extremely lightweight for reduced rotating mass Ideal for high-performance racing and rebuilds A premium ceramic bearing upgrade for racers chasing every last bit of speed and smoothness. 🏁

Read more less

Upgrade your buggy with the R1WURKS B7 Battery Mount Set, a lightweight, rigid replacement for the stock plastic mounts. This premium kit includes centered and 1/2 offset mounts, allowing precise battery positioning to fine-tune weight balance and handling for different track conditions. Machined from high-strength 7075-T6 aluminum and paired with carbon fiber battery latches, this system delivers race-grade durability with smooth, secure battery retention. Included low-profile and standard standoffs support a wide range of battery heights, while titanium hardware keeps weight to a minimum. Key Features CNC-machined 7075-T6 aluminum construction Matte black anodized finish with laser-etched R1WURKS branding Centered and 1/2 offset mounts for battery position tuning Carbon fiber battery latches for strength and weight savings O-ring latch friction feature for smooth operation and secure hold Supports low-profile and standard-height batteries Lightweight titanium mounting screws included Includes (4) R1WURKS M3×8 Titanium Button Head Screws (2.5mm hex) (2) M3×6 Flat Head Screws (4) M3×8 Flat Head Screws (2) Black Aluminum Countersunk Washers (2) 6×4×1 NBR Rubber O-Rings (2) Black Aluminum Low-Profile Standoffs (2) Black Aluminum Standard Standoffs (2) Carbon Fiber Battery Latches (1) 1/2 Offset Mount A (1) 1/2 Offset Mount B (2) Centered Offset Mounts Fitment B7 Series (B7 platform) Disclaimer R1 Brushless Motor Lab, LLC is an independent manufacturer and seller of aftermarket parts compatible with various RC vehicles. We are not affiliated with, sponsored by, or endorsed by Associated Electrics, Inc. All model references are used strictly for compatibility and identification purposes. Associated Electrics® is a registered trademark of Associated Electrics, Inc. All other trademarks are the property of their respective owners. A clean, adjustable battery mounting solution built for racers who want precision balance, lighter weight, and pro-level durability. 🏁  

Read more less

Upgrade your factory steering with the R1WURKS Aluminum Steering Rack, a precision-machined replacement designed to dramatically improve durability, steering precision, and on-track feel. Replacing the stock plastic component with 7075-T6 aluminum delivers tighter response and long-term reliability—without adding weight. At just 2.80 grams, this rack offers race-ready strength in a lightweight package, finished in sleek black anodizing with R1WURKS branding. Key Features Increased durability and precision over stock plastic Sharper steering response and improved feel Ultra-lightweight design: 2.80g CNC-machined from 7075-T6 aluminum Black anodized finish with R1WURKS branding Includes (1) Aluminum Steering Rack (2) 4×6×0.2mm shims Fitment B7 B7.1 B7D T7 SC7 B6.4 B6.4D SC6.4 T6.4 Disclaimer R1 Brushless Motor Lab, LLC is an independent manufacturer of aftermarket parts compatible with various RC vehicles. We are not affiliated with, sponsored by, or endorsed by Associated Electrics, Inc. All model references are used strictly for compatibility and identification purposes. Associated Electrics® is a registered trademark of Associated Electrics, Inc. A simple, effective steering upgrade for racers who want precision you can feel—lap after lap. 🏁  

Read more less

The F2 body from JConcepts brings IFMAR World Championship–winning design to the Losi 22X platform. Precision-engineered for a tight, clean fit, the F2 slides perfectly over the top deck and under the front shock tower, delivering race-proven aerodynamics and durability across dirt, carpet, and turf. About the F2 Buggy Body Proven Design & Advanced FeaturesThe aggressive, forward-biased cab improves steering response and adaptability on changing surfaces. A louvered roof with the Finnisher “V” profile enhances airflow and stability, while chamfered side-pods blend seamlessly into the cab for reduced drag. Extra rear windows add style, and reinforced spur-gear guard coverage with added clearance helps absorb impacts. Choose Standard or Lightweight thickness to match track conditions and durability needs. Features Proven F2 design from IFMAR World Championship lineage Forward-positioned cab with steep windshield for multi-surface control Tight chassis-outline fit for secure, clean mounting Louvered roof & Finnisher “V” for improved airflow and stability Double-step side-pods and roof for standout styling Reinforced spur-gear guard coverage with added clearance Includes (1) TLR 22X “F2” 1/10 Buggy Body (Clear) — Standard (0707) or Lightweight (0707L) (2) 6.5" Wings (carpet/turf/dirt) (1) Decal Sheet (1) Window Masking Sheet Compatibility: Losi 22XTech Note: Painted body shown for illustration only. Product is clear and unpainted.  

Read more less

The Team Associated 92417 Rear Wing & Body Mounts Set is a direct replacement designed for the RC10B7 1/10-scale buggy platform. This set restores proper rear wing positioning and body mounting alignment, making it ideal for repairs, rebuilds, or keeping race-day spares on hand. Manufactured to factory specifications for precise fit and durability. 🔧 Features Genuine Team Associated replacement parts Direct-fit rear wing and body mounts Maintains proper wing height and body positioning Ideal for maintenance, rebuilds, or race prep 📦 Includes (1) Rear Wing Mount (2) Rear Body Mounts ✅ Compatibility Team Associated RC10 B7 (Original) Team Associated RC10 B7D

Read more less

The Team Losi Racing TLR-1075 Bulkhead and Kick Shims Set is a direct replacement designed for the 22X 2WD buggy platform. This set restores proper front-end geometry and durability, making it ideal for maintenance, rebuilds, or race prep. Manufactured to exact factory specifications, this bulkhead and shim set ensures correct kick-up angle and consistent suspension alignment. 🔧 Features Genuine Team Losi Racing replacement parts Direct-fit bulkhead for 22X platforms Includes kick-up shims for proper front suspension geometry Ideal for repairs, rebuilds, or race-day spares 📦 Includes (1) Bulkhead (2) Kick-Up Shims ✅ Compatibility Losi 22X Losi 22X-T

Read more less

  Keep your battery secure and your buggy race-ready with the Team Associated B6 Battery Strap. Designed as a direct replacement part, this strap ensures a snug fit and reliable hold for your battery pack during the most demanding runs. ✅ Direct Replacement – Fits RC10 B6 and B6D buggies✅ Secure Fit – Keeps your battery firmly in place✅ Complete Package – Includes strap, nuts, and hardware Includes: (1) Battery Strap (2) Battery Strap Nuts (Hardware Set) Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D

Read more less

Team Associated B6.1/B6.1D Rear Ballstud Mount (91775) Upgrade your suspension adjustability with the Team Associated B6.1/B6.1D Rear Ballstud Mount. This precision-machined part provides a secure mounting point for your rear camber links, allowing for fine-tuned handling and performance. Features: Precision-machined for accurate fit and alignment Provides stable mounting for rear camber link adjustments Durable construction for long-lasting performance Direct replacement for the stock rear ballstud mount Compatibility: Team Associated B6.1 Team Associated B6.1D Includes: (1) Rear Ballstud Mount Perfect for restoring or upgrading your buggy’s rear suspension geometry and tuning options.

Read more less

🔥 Big Power. Small Footprint.The Team Exalt 110W Digital Soldering Iron packs serious heat in a travel-friendly design. With lightning-fast heat-up, digital precision, and a built-in safety shutoff, this is your go-to soldering tool whether you’re at the track or at the bench. ⚡ Features: 110W power output for rapid heat-up Digital display with °F/°C readout Auto safety shutoff & sleep timer Ceramic heater with platinum temp sensor Plug-and-play AC design—no base station needed Compact, portable, and ready to travel 💡 Built for RC racers, builders, and field techs who demand pro-level performance in a portable package.

Read more less

💥 Cut Weight. Gain Speed. Dominate the Track.The TLR 22X Titanium Slipper Top Shaft Screw is a small upgrade that delivers a big performance edge. Precision-machined from ultra-lightweight titanium, this screw weighs about 50% less than stock—reducing rotating mass and lowering the center of gravity for sharper handling, faster acceleration, and maximum on-track control. 🔧 Key Features: Ultra-lightweight titanium construction ~50% lighter than stock screw Reduces rotating mass for quicker response Lowers CG for improved stability and cornering Precision fit and finish Built for serious racing performance 📦 Includes: (1) Titanium Slipper Top Shaft Screw ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Unlock instant throttle response and maximum efficiency with the Team Losi Racing 22X Slipper Eliminator Plates Set — the ultimate upgrade for stock class racers aiming to shave weight and dominate on high-traction tracks. 🔧 Features: Designed specifically for stock racing applications Lightweight CNC-machined aluminum construction Hard anodized for extra strength and sleek looks Eliminates slipper assembly for direct power transfer Reduces rotating mass for quicker acceleration Rigid design ensures consistent drivetrain performance 📦 Includes: (1) Aluminum Slipper Eliminator Plates Set ⚠️ Tech Note: Not recommended for modified racing due to increased drivetrain stress. ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

This is a Reedy Flat Sensor Wire. The flat sensor wires that are included with the Reedy Sonic motor are now available separately in a variety of lengths to suit 1/10 and 1/8 applications! The flat design looks great and provides an extremely clean look. Choose from between 70mm and 270mm lengths.

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Built with one goal: predictable, repeatable steering that stays consistent. The Guardian 2.2” Slim Front was designed for racers who are tired of chasing front-end balance from run to run. After one proper break-in, this tire settles into its performance window — and stays there. No rollercoaster grip.No fading edge after a few heats.Just confidence, lap after lap. 🔄 A Break-In That Works For You Most front tires need to be “knocked down” to calm the initial edge. The Guardian works differently. The first run activates the tire rather than dulling it. First run: smooth, easy to drive, possibly slight push After break-in: steering comes alive Following runs: grip and feel remain remarkably consistent Where many fronts peak early and fade after 2–3 runs, the Guardian maintains its balance through the life of the tire. That means you tune once — and focus on driving. 🏁 Compounds A3 Medium (Green) Best for high-bite office carpet Great for tracks allowing traction compound Ideal for extended practice sessions Strong longevity with consistent grip A4 Soft (Red) Designed for lower-bite surfaces (CRC, Beach, EOS-style carpet) Ideal where traction compound is not allowed Maximum steering and forward grip Slightly higher wear for peak performance 🛠 Design Details That Matter ✔ Increased Sidewall (One Side) One sidewall is enlarged to calm initial edge and improve mid-corner stability. Mounted with the larger side outward, the result is confident turn-in without nervous steering. ✔ Debossed Logos No raised lettering to catch carpet fibers No glue cracking around sidewall branding Cleaner gluing and better long-term durability ✔ Larger, Tighter Pin Layout Maintains strong front traction Increases wear life Consistent grip without sacrificing durability If you value predictability, consistency, and confidence, the Guardian front tire delivers a planted, trustworthy feel that lets you focus on winning — not chasing setup changes.  

Read more less

The Team Associated Factory Team 8.5mm Aluminum Clamping Wheel Hexes are an optional upgrade designed to provide a secure, slip-resistant wheel mounting solution. Featuring a clamping design, these hexes help prevent wheel wobble and maintain consistent wheel alignment under high-load racing conditions. Machined from durable aluminum, they offer lightweight strength while improving reliability over standard hex designs. Ideal for racers looking for a more secure and precise wheel fit. Features Factory Team optional upgrade 8.5mm clamping wheel hex design CNC-machined aluminum construction Helps reduce wheel slop and movement Improves wheel mounting security Lightweight and durable Includes (2) 8.5mm Aluminum Clamping Wheel Hexes (2) Axle Pins (2) Hex Screws A race-ready wheel mounting upgrade built for strength, precision, and consistent performance. 🏁  

Read more less

Commemorate Team Losi Racing’s IFMAR World Championship with the official TLR World Champion Trucker Hat. Built on the iconic Richardson 112 platform, this cap combines premium comfort, durability, and classic trucker styling that has made it one of the most popular hats in the USA. Known for its quality construction and timeless fit, the Richardson 112 features a structured front panel and breathable mesh back, making it perfect for race days, shop time, or everyday wear. With championship-inspired TLR branding, this hat lets you represent winning heritage wherever you go. Features Official TLR World Championship commemorative design Richardson 112 premium trucker cap Structured front with breathable mesh back Classic mid-profile fit Adjustable snapback closure Durable, high-quality construction A clean, race-inspired look that celebrates TLR’s championship legacy while delivering everyday comfort and style. 🏁  

Read more less

The 1up Racing Pro Duty Titanium Turnbuckle Set is engineered specifically for the RC10B7.1, delivering maximum strength with massive weight savings. These turnbuckles weigh ~45% less than steel while maintaining exceptional durability for the most demanding racing conditions. Manufactured from precision-ground centerless 6AL4V Titanium bar stock using Swiss-style CNC screw machines with live tooling and thread rolling, these turnbuckles set a new standard in quality and performance. Each piece features the 1up arrow laser-engraved on all four sides of the center lug for unmistakable authenticity. Key Benefits Roughly 45% lighter than steel turnbuckles Increased strength and durability Improves overall vehicle efficiency and response Designed specifically for the B7.1 platform Features Precision 6AL4V Titanium construction Swiss-style CNC machining with rolled threads Laser-engraved 1up arrow on all four sides Pro-level performance and finish Backed by the 1up Racing Pro Duty Guarantee Includes (6) Pro Duty Titanium Turnbuckles Raw Titanium finish (standard) Finish Options (Optional) Raw Titanium  Blue (+$10) Bronze (+$10) Gold (+$10) Pink (+$10) Installation Notes Use 1up Racing 3.2mm Pro Double-Ended Turnbuckle Wrench Apply a small amount of 1up Racing Gold AW Grease to threads before installation for smooth adjustment Fitment Team Associated RC10B7.1 A premium upgrade for racers who want lighter weight, maximum strength, and precision you can feel on the track. 🏁    

Read more less

Upgrade your tuning options with the Team Associated RC10B7 Factory Team Caster Block Link Mounts. Made from AE’s legendary lightweight carbon fiber, these optional mounts increase the caster block link offset by +1mm, giving racers an additional adjustment point for fine-tuning handling characteristics to suit different track conditions. A simple but effective setup change for drivers looking to refine steering feel, roll characteristics, and front-end response. Features Factory Team carbon fiber construction Lightweight, strong, and race-proven Increases caster block link offset by +1mm Provides additional tuning flexibility Direct fit for the RC10B7 platform Includes (2) +1mm Caster Block Link Mounts

Read more less

Charge Clean. Charge Confident. Upgrade your charging setup with the Team Exalt ProCharge 2S Specialized Charging Cable, designed for precision, durability, and a professional look at your pit station. Built for Junsi iCharger 456/458 Duo chargers, this premium cable ensures a clean, secure, and efficient charge for your 2S LiPo batteries. Professional-Grade Construction Each ProCharge cable is meticulously assembled with 12AWG charge leads and 18AWG balance leads, paired with high-quality XT90 and 5mm bullet connectors for consistent, low-resistance power delivery. A custom braided PET sleeve and self-sealing shrink tubing keep everything neat, organized, and protected from wear. Features: Custom-built 2S ProCharge cable for Junsi iCharger 456/458 Duo XT90 charger connector with 5mm battery bullets 12AWG main leads and 18AWG balance leads for reliable current flow 2mm balance plug to 3-pin XH connector Braided PET sleeve for a clean, professional finish Self-sealing shrink tube ensures durability and neat cable management Reduces pit clutter and promotes safe, organized charging Specifications: Spec Detail Charger Connector XT90 Battery Connector 5mm Bullet Balance Connector 2mm to 3-pin XH Main Leads 12AWG Balance Leads 18AWG Includes: (1) Team Exalt ProCharge 2S Specialized Charging Cable Team Exalt — Professional Power. Cleaner Charging.

Read more less

Precision Fit. Proven Strength. Upgrade your suspension geometry with the Team Associated Factory Team Aluminum 3-Gear Gearbox Arm Mount “C” Block. Designed for the RC10B7, B7D, T7, and SC7 platforms, this CNC-machined aluminum mount provides superior strength, precise alignment, and long-lasting durability under the toughest racing conditions. Factory-Grade Performance Engineered to maintain suspension integrity and reduce flex, this aluminum “C” block ensures consistent handling through high-speed corners and rough landings. Whether you’re chasing podiums or fine-tuning setup precision, this component delivers the reliability and performance serious racers expect from Team Associated. Features: CNC-machined aluminum construction for maximum rigidity and precision fit Designed for 3-gear gearbox setups Improves consistency and handling through rough terrain Factory Team engineering for professional-grade reliability Direct replacement for stock “C” block Includes: (1) Aluminum 3-Gear Gearbox Arm Mount “C” Block Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D Team Associated RC10 T7 Team Associated RC10 SC7 Team Associated Factory Team — Engineered to Win.

Read more less