Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31389Maximum Spacing. Race-Ready Adjustability. The Team Associated 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers (31389) are ideal for making larger wheelbase and hub spacing adjustments on RC8B3 and RC8T3 series vehicles—or any platform that uses 3.5mm hinge pins. Durable and lightweight, these aluminum washers are a reliable tuning option for racers who want full control over rear-end geometry. ✅ Size: 7.8mm OD x 3.5mm ID x 2.0mm thick✅ Anodized blue 7075 aluminum – high strength, low weight✅ Designed for wheelbase and hub spacing adjustments✅ Compatible with 3.5mm hinge pin platforms✅ Pairs perfectly with 0.5mm and 1.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers Part #: 31389 💡 Pro Tip: Use thicker spacers like this to extend wheelbase for more high-speed stability or track-specific tuning.

Read more less

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31388Dial In Wheelbase. Precision You Can Stack. The Team Associated 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers (31388) are a smart tuning tool for adjusting wheelbase and hub spacing on RC8B3, RC8T3, and any 1/8 vehicle using 3.5mm hinge pins. These durable, lightweight aluminum spacers help you fine-tune geometry for track conditions or personal preference. ✅ Size: 7.8mm OD x 3.5mm ID x 1.0mm thick✅ CNC-machined blue anodized aluminum – race-grade durability✅ Used for hub spacing and wheelbase tuning✅ Fits RC8B3, RC8T3, and any vehicle with 3.5mm hinge pins✅ Perfect for stacking with .5mm or 2.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers Part #: 31388 💡 Pro Tip: Fine-tuning wheelbase can impact rear grip, stability, and overall cornering behavior—stack accordingly for your surface.  

Read more less

Team Associated Aluminum Motor Mount – RC10B7 Precision Fit. Proven Durability. Upgrade your RC10B7 or B7D with this genuine Team Associated Aluminum Motor Mount, engineered for a secure motor install and optimal gear mesh. Made from high-quality aluminum, it offers improved strength and heat dissipation—perfect for high-performance builds. 🛠️ Features: CNC-machined aluminum construction Increased durability over stock components Optimized for heat dissipation and motor alignment Official Team Associated replacement part 📦 Includes: (1) Aluminum Motor Mount ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D ⚙️ Trust Team Associated parts to deliver race-ready performance with every install.

Read more less

Team Associated Differential Outdrive Shims (14pc) – RC10 B74 Precise Tuning for Your 4WD Drivetrain Optimize the fit and function of your RC10 B74 drivetrain with this Team Associated Differential Outdrive Shim Set. Designed as direct replacements for the kit-supplied parts, these precision shims allow you to fine-tune outdrive spacing and reduce slop for smoother, more efficient drivetrain performance. 🔧 Features: 🔩 Precision Tuning Parts – Designed to eliminate excess play in differential outdrives ⚙️ Direct Replacement – Ideal for use with the RC10 B74 1/10 4WD Buggy 🧷 Multiple Thicknesses – Mix and match to achieve perfect spacing 📦 Includes: (10) 0.1mm Outdrive Shims(4) 0.25mm Outdrive Shims COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

1up Racing UltraLite 3 Wire Organizer – Clean Wiring, Zero Compromise ⚡ Tidy up your electronics like a pro with the 1up Racing UltraLite 3 Wire Organizer — the perfect blend of style and performance for your wiring setup. Whether you're refreshing your race rig or building from scratch, this lightweight aluminum organizer delivers a clean look without the bulk. 💨 At just 0.59g, it’s engineered to keep things neat without adding drag or weight, making it ideal for serious racers who care about every gram. ✨ Key Features: 🎯 Fits 12–14 AWG Wires – Compatible with wire diameters up to 4.1mm OD🪶 Featherweight Design – Weighs only 0.59g to keep your ride light and fast💎 Anodized Aluminum Finish – Durable, sleek, and track-ready🔌 Organized & Secure – Prevents tangled wires and boosts air circulation📐 Ultra-Clean Aesthetic – Show-quality wiring made easy 📦 What’s in the Box? ✔️ (1) UltraLite 3 Wire Organizer (Anodized Aluminum)

Read more less

JConcepts F2 Lightweight Body for XRAY XB2 2024 – Includes Two 6.5" Wings🏁 Lighten Up and Stay Fast – Proven Aero for High-Grip Racing The JConcepts F2 lightweight body for the XRAY XB2 2024 is built for serious racers looking to reduce weight and gain responsiveness on high-bite surfaces like turf, carpet, and polished clay. Based on the same winning layout as the standard F2, this lightweight version trims the fat while keeping all the performance you expect from a JConcepts shell. Featuring the signature forward cab bias, dual rear windows, and Finnisher "V" side-pod design, the F2 body offers maximum downforce, clean airflow, and high-speed stability. The slim profile hugs the XB2 2024 chassis perfectly, with built-in clearance for spur gear guards and space for electronics and wiring. ✨ Key Features: Direct fit for the XRAY XB2 2024 platform Clear lightweight polycarbonate for reduced weight and snappier handling Original JConcepts F2 profile with aggressive styling and aero balance Dual step side-pods and cab-forward layout for optimal steering response Includes (2) 6.5" Carpet | Turf | Dirt Wings Spur gear guard clearance molded into the body Comes with window masks and full decal sheet 📦 Includes: (1) F2 Clear Lightweight Body for XRAY XB2 2024 (2) 6.5" Wings (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Painted body shown for illustrative purposes only. Product ships clear and untrimmed. Compatibility: XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt

Read more less

JConcepts XRAY XB2 2024 "S15" Lightweight Clear Buggy Body w/Two Wings Premium Lightweight Option for Maximum Performance Dominate the track with the lightweight version of the JConcepts "S15" Buggy Body, precision-molded for the XRAY XB2 2024 Carpet and Dirt platforms. This body features the same aerodynamic enhancements and aggressive styling as the standard S15 — now in a thinner polycarbonate for reduced weight and sharper handling. Mid-body winglets, a cockpit shark fin, and a raised rear profile give your buggy the downforce, stability, and fitment needed to perform at its peak. Ideal for racers chasing every last tenth of a second, the lightweight S15 is a go-to choice for competitive events where agility and response matter most. ✨ Features: 💨 Lightweight Polycarbonate Construction – Reduces overall weight for quicker response and better rotation 🧭 Forward Cab Bias – Enhances steering feel and directional control 🛡️ Mid-Body Winglets & Stabilizer Kick-Up – Adds side bite and rear grip 🦈 Cockpit Shark Fin – Improves high-speed stability and structural integrity 🧰 Raised Rear Side-Pods – Fits tall shorty packs or saddle pack layout ✂️ Includes Window Mask & Decal Sheet 📦 Includes: ✔ (1) Lightweight Clear S15 Body for XRAY XB2 2024✔ (2) Rear Wings✔ (1) Window Mask Sheet✔ (1) JConcepts Decal Sheet ✅ Compatibility: XRAY XB2 2024 Carpet Edition XRAY XB2 2024 Dirt Edition 🖌️ Note: Body comes clear and unpainted. Painted image is for reference only.

Read more less

🏁🔧 Genuine Team Associated Replacement CVA Bones The Team Associated CVA Bone Set is a replacement drivetrain component designed to restore smooth and reliable power transfer in compatible Team Associated vehicles. Manufactured to Team Associated specifications, these CVA bones provide dependable performance and precise fitment for your drivetrain assembly. Ideal for routine maintenance, repairs, or keeping spares in your pit box. 🔧 Features ✔ Genuine Team Associated replacement part✔ Precision-manufactured for proper fit and function✔ Durable drivetrain component✔ Helps maintain smooth power transfer✔ Direct replacement for worn or damaged CVA bones✔ Sold as a pair 📦 Includes (2) CVA Bones 💡 Recommended Maintenance Team Associated recommends replacing the: CVA Barrel CVA Pin (ASC91438) when installing new CVA bones to ensure optimal drivetrain performance and longevity. 💡 Perfect For ✔ Routine maintenance✔ Drivetrain rebuilds✔ Race-day spare parts✔ Replacing worn CVA components✔ Maintaining smooth drivetrain operation ⚠️ Notes Verify compatibility with your vehicle before installation CVA barrel and pin sold separately (ASC91438)  

Read more less

🔌⚡ Clean Wiring. Reliable Signal. Low-Profile Design. The ProTek RC Flat Sensor Wire is designed to provide consistent, interference-free communication between your sensored brushless motor and ESC. With a slim, flat design, it keeps your build clean while improving wire routing in tight chassis layouts. 🏁 About This Sensor Wire 📏 Clean, Low-Profile Routing The flat cable design allows easy routing under components and through tight spaces, reducing clutter and improving overall build appearance. ⚡ Reliable Signal Transfer Engineered for consistent, interference-resistant communication, ensuring smooth motor performance in sensored brushless setups. 🎯 Perfect Fit Length At 150mm, this cable is ideal for a wide range of 1/10 scale applications and clean electronics layouts. 🔧 Key Features ✔ Low-profile flat cable design✔ Reliable signal transfer for sensored systems✔ Slim construction for easy routing✔ Helps reduce wiring clutter✔ Interference-resistant performance✔ Optimized for brushless motor/ESC communication 📦 Includes (1) Flat Sensor Wire (150mm) 📊 Specifications Length: 150mm 🧰 Recommended Use Sensored brushless motor to ESC connection Clean electronics installations Organized wiring setups  

Read more less

Keep your drivetrain running smoothly with the Team Associated 54T Idler Gear for the 3-gear gearbox. This replacement idler gear is designed for RC10B7, RC10T7, and RC10SC7 platforms, delivering reliable power transfer and consistent performance. Precision molded for proper mesh and durability, this gear is ideal for replacing worn or damaged components to maintain drivetrain efficiency and smooth operation. 🔧 Features:• Replacement 54T idler gear for 3-gear gearbox• Designed for RC10B7, RC10T7, and RC10SC7 platforms• Precision molded for smooth gear mesh• Durable construction for long-lasting performance• Ideal maintenance or replacement part 📦 Includes:• (1) 3-Gear Gearbox Idler Gear ⚙️ Specifications:• Tooth Count: 54T• Gearbox Type: 3-Gear• Position: Idler Gear Keep your drivetrain dialed in with the Team Associated 54T idler gear, built for smooth performance and dependable durability.    

Read more less

Get clean, reliable solder joints every time with the ProTek RC Premium Rosin Core Solder 60/40. Designed for RC electronics and precision work, this solder features a classic 60/40 tin-to-lead blend that delivers smooth flow, excellent conductivity, and easy handling for everything from simple repairs to full custom builds. The integrated rosin core flux promotes strong bonding and clean joints by improving wetting action and reducing oxidation. Whether you're soldering connectors, wiring, or electronics, this solder provides consistent, professional-quality results. 🔧 Features:• 60/40 tin-to-lead blend for reliable performance• Rosin core flux for clean, strong solder joints• Smooth flow for easy and precise application• Excellent electrical conductivity• Helps reduce oxidation and improve bonding• Ideal for RC wiring, connectors, and electronics 📦 Includes:• (1) ProTek RC Premium Rosin Core Solder 60/40 (12g) ⚙️ Specifications:• Weight: 12g• Type: Rosin Core Solder• Composition: 60/40 Tin/Lead Perfect for builders and racers alike, the ProTek RC 60/40 solder delivers dependable performance and clean results for all your RC electronics work.  

Read more less

Gain a competitive edge with the R1WURKS Ultra-Lightweight Titanium HD CVA Bones, engineered to dramatically reduce drivetrain rotating mass for faster acceleration and improved responsiveness. Precision-machined from treated Grade 5 (Ti-6Al-4V) titanium, these CVA bones are designed specifically for high-performance stock racing applications. Optimized for 17.5T and 21.5T classes, they help deliver sharper throttle response, smoother braking, and improved cornering agility. ⚡ Ultra-Lightweight Racing Advantage Weighing only 6.0g for the pair, these CVA bones are 38.78% lighter than standard bones, significantly reducing rotational inertia in the drivetrain. Less rotating mass allows the drivetrain to spin up and slow down faster, giving racers improved throttle control and braking response. This results in a car that feels more agile, responsive, and efficient on the track. 🏁 Improved Efficiency & Performance The reduction in drivetrain mass also improves overall efficiency, helping reduce motor load and lower motor temperatures during long runs. Combined with improved power transfer, this helps racers maintain consistent performance throughout heats and mains. ⚙️ Features Ultra-lightweight design at 6.0g per pair 38.78% lighter than standard CVA bones Precision-machined from treated Grade 5 (Ti-6Al-4V) titanium Reduces drivetrain rotational inertia Improves acceleration and braking response Enhances cornering agility and vehicle responsiveness Improves drivetrain efficiency and power transfer Helps reduce motor temperatures Laser-etched logos and identification markings 📦 Includes (2) Titanium CVA Bones 🔧 Compatibility TLR 22X TLR 22 5.0 Replaces: TLR232138 A premium performance upgrade for competitive racers looking to reduce drivetrain weight, improve responsiveness, and maximize efficiency on the track.  

Read more less

Restore precise suspension performance with the XRAY XB2 ’25 Front Carbon Shock Tower (2-Dot) (322091). Designed for the XB2 buggy platform, this carbon fiber shock tower maintains accurate front suspension geometry and consistent handling on the track. Manufactured from high-quality carbon fiber, the tower provides excellent stiffness while remaining lightweight, helping maintain precise shock mounting positions and predictable suspension performance during racing. Whether you're replacing a damaged component or refreshing your setup, this tower keeps your XB2 buggy performing at its best. Features• High-quality carbon fiber construction for strength and low weight• Maintains accurate front suspension geometry• 2-Dot specification for proper XB2 setup configuration• Precision fit for the XRAY XB2 platform Includes• (1) XB2 ’25 Front Carbon Shock Tower (2-Dot)

Read more less

Keep your suspension mounts protected and looking race-ready with the Team Associated RC10B7.1 Shock Tower Covers Set (92580). Designed specifically for the B7.1 buggy platform, these covers help shield the shock tower mounting areas from wear, impacts, and track debris during racing and practice. Perfect for routine maintenance or race-day prep, these covers maintain a clean, finished look while helping preserve the integrity of the suspension mounting points. A simple replacement that helps keep your Team Associated B7.1 performing consistently. Features• Genuine Team Associated replacement parts• Helps protect shock tower mounting areas from wear and debris• Maintains a clean, finished factory look• Ideal for maintenance, rebuilds, or race prep• Designed for the RC10B7.1 / B7.1 buggy platform Includes• (1) RC10B7.1 Shock Tower Covers Set    

Read more less

The Team Associated B7.1 Caster & Steering Blocks Set (92576) is a replacement set designed to restore precise steering performance and front suspension geometry on the RC10B7.1 platform. Perfect for maintenance, rebuilds, or race prep, this set ensures your buggy maintains accurate handling and consistent performance on the track. With multiple steering block options included, racers can fine-tune kingpin inclination (KPI) and steering characteristics to match track conditions and driving preferences. Features• Genuine Team Associated replacement parts• Restores precise steering and suspension performance• Multiple KPI steering block options for tuning• Helps maintain consistent handling and control• Designed specifically for the B7.1 platform Includes• (2) Caster Blocks• (2) 4L/R Steering Blocks (KPI0)• (2) 4L/R Steering Blocks (KPI2)• (2) 3L/R Steering Blocks (KPI0)• (2) 3L/R Steering Blocks (KPI2)    

Read more less

Keep your 22X AC running smooth and efficient with this Essentials Bearing Kit. Designed to replace the key drivetrain bearings, this kit helps reduce friction, improve efficiency, and restore that free-spinning feel critical for consistent lap times. Perfect for race prep, mid-season maintenance, or a full refresh before your next event. Includes (8) 5x10x4mm Revolution Bearings (Greased) (4) 10x15x4mm Rubber Shielded Bearings (Greased) (2) 5x13x4mm Revolution Bearings (Greased) Features Direct fit for TLR 22X AC High-performance Revolution series bearings Pre-greased for durability and longevity Rubber shielded bearings for added debris protection Reduces drivetrain drag Improves overall smoothness and consistency A simple but important upgrade to keep your 22X AC efficient, smooth, and race-ready. 🏁  

Read more less

The Team Associated 3-Gear Gearbox Set is a genuine replacement assembly designed for the RC10B7, RC10T7, and RC10SC7 platforms. Built to factory specifications, this gearbox set ensures proper drivetrain alignment, durability, and smooth power delivery. Whether you're rebuilding after heavy track use or replacing damaged components, this 3-gear configuration maintains the performance and reliability expected from Team Associated race platforms. Features Genuine Team Associated replacement part 3-gear gearbox configuration Factory-fit for proper alignment and durability Maintains smooth and efficient power transfer Includes (1) 3-Gear Gearbox Set Compatibility Team Associated RC10B7 Team Associated RC10T7 Team Associated RC10SC7 A reliable drivetrain replacement to keep your buggy or truck performing at its best. 🏁    

Read more less

Step up your pit setup with the Sticky Kicks RC Works Team Bottle. Built with a clean brushed aluminum finish and a true factory look, this bottle is perfect for oils, cleaners, or detail fluids at the track or in the shop. The included atomizer spray cap delivers smooth, controlled application while keeping your pit area looking professional and organized. Works Team Bottle Benefits Brushed aluminum construction Clean, factory-style appearance Atomizer spray cap for even, controlled spray Ideal for pit or workshop use A simple, dialed pit accessory that adds function and style to any race setup. 🏁  

Read more less

The Avid Triad Direct Drive for the Team Associated B7 is designed for stock racers looking to eliminate the slipper clutch and reduce rotating mass for maximum drivetrain efficiency. By removing the entire clutch assembly, you get direct power transfer with zero slip (other than the differential), resulting in sharper throttle response and a more connected feel on high-grip tracks. Weighing just 6.45g with a 72T spur installed (2.62g without spur), this is one of the lightest direct drive systems available. 🔥 Why Run Direct Drive? Some stock racers prefer direct drive for: Reduced rotating mass Immediate throttle response Consistent power delivery Simplified drivetrain setup It’s not for every track or driver, but in the right conditions it can offer a competitive edge. ⚙️ Features Eliminates full slipper clutch assembly Ultra-lightweight design (6.45g w/ 72T spur) All-aluminum construction Custom M3x48 aluminum topshaft screw Clean, secure install Easy conversion back to slipper setup No loose slipper screws to maintain Works with Avid Triad spur gears 📦 Includes (1) Direct Drive Aluminum Plate (1) 69T Triad Spur (1) 72T Triad Spur (1) M3x48 Aluminum Screw (1) Aluminum Hat Bushing (1) Aluminum Cone Washer (1) M3 Ringer Aluminum Nut Note: Works with Avid Triad spur gears (spur not included unless specified in package). 🛠 Installation Use B6.1 Triad Direct Drive assembly instructions (installation is the same for the B7). ✅ Compatibility Team Associated B7 For racers chasing maximum efficiency and minimal rotating mass, the Triad Direct Drive keeps things light, simple, and race-focused. 🏁  

Read more less

Restore smooth, consistent shock performance with the Team Losi Racing G3 TiNi Shock Shaft, designed for precision damping and long-lasting durability. Featuring a 3mm diameter and 48.7mm length, this shaft uses a TiNi coating to reduce friction and wear for smoother shock action and extended service life. Ideal for rebuilds or routine maintenance, this shock shaft helps maintain consistent suspension performance under demanding race conditions. Features: G3 TiNi-coated shock shaft 3mm diameter x 48.7mm length Reduced friction for smoother shock operation Increased wear resistance and durability Precision-machined for consistent performance Includes: (1) Shock Shaft Part Number: TLR-1129

Read more less

Ensure proper spring alignment and smooth shock operation with the Team Losi Racing 13mm Shock Spring Cups. Designed specifically for the TLR 22X platform, these spring cups fit at the shock ends to securely locate the spring and maintain consistent suspension performance. Ideal for replacement during shock rebuilds or routine maintenance, these parts help keep your suspension working smoothly and reliably on race day. Features: Designed for 13mm shock springs Helps keep springs properly seated Maintains smooth and consistent suspension action Precision-fit replacement components Compatibility: Team Losi Racing 22X Includes: Shock Spring Cups Part Number: TLR-1119    

Read more less

Keep your drivetrain running smoothly with the Team Losi Racing Idler Gear Set, designed specifically for the TLR 22X platform. These gears provide reliable power transfer and are ideal for routine maintenance or replacing worn drivetrain components. Manufactured to Team Losi Racing standards, this idler gear set ensures consistent performance and durability under race conditions. Features: Precision-molded idler gears Maintains smooth and efficient drivetrain operation Durable construction for race use Direct replacement parts Compatibility: Team Losi Racing 22X Includes: (2) Idler Gears Part Number: TLR-1120  

Read more less

Strengthen your chassis and reduce front-end tweak with the Vision Racing (VR) Carbon Chassis Standoff Brace Set. Designed for carbon fiber chassis platforms, this upgrade adds rigidity where it matters most while keeping weight low and looks clean. Featuring dual-mounting aluminum standoffs, this brace helps stabilize the front section of the chassis under load, improving consistency and feel—especially on high-grip tracks and during hard landings. Features & Benefits: Reduces front-end chassis tweak Adds rigidity to carbon fiber chassis Dual-mount aluminum standoffs for strength and stability Lightweight, race-focused design Clean, stylish finish that complements carbon chassis builds Compatibility: Team Associated B7 Team Associated B7D Team Associated T7 Team Associated SC7 Includes: Carbon chassis standoff brace set with aluminum standoffs A solid first impression from Vision Racing—functional, clean, and built for racers looking to tighten up their chassis performance.  

Read more less

Upgrade or replace your steering hardware with the XRAY Composite Extended Steering Servo Arm Set. Designed for precision and durability, these servo arms provide a secure fit and consistent steering response for XRAY competition platforms. Manufactured from high-quality composite material, each arm is precision machined for accurate spline engagement and easy installation right out of the package. Features & Benefits: High-quality composite construction for strength and durability Extended design for precise steering geometry Precision machined for accurate spline fit Easy installation with consistent steering performance Compatibility: XRAY XB4 XRAY XT2 1/10 Dirt & Carpet Competition Buggy and Stadium Truck platforms Includes: (1) 23T servo arm (1) 25T servo arm A clean, reliable replacement set to keep your XRAY steering system tight and responsive on any surface.    

Read more less

Pivot Weight Overview:Dial in precise front-end balance with the Team Losi Racing 22X Brass Pivot Weight. This 5-gram tuning weight adds mass exactly where it matters most, helping improve stability, cornering consistency, and overall handling performance on the track. 🏁 About the Brass Pivot Weight Designed for racers who demand fine-tuned control, this brass pivot weight installs directly into any front pivot location. The added low-mounted mass lowers the center of gravity and enhances front-end weight distribution, resulting in improved steering response and chassis stability. It’s a simple, effective upgrade for dialing in your setup for changing track conditions. 🔧 Key Features Heavy brass construction Adds 5 grams of precisely placed weight Fits any front pivot location Lowers center of gravity Improves front-end balance and stability Enhances cornering consistency Quick and easy installation Ideal for fine-tuning race setups 📦 Includes (1) Brass Pivot Weight (5g) A must-have tuning option for competitive 22X racers looking to extract maximum performance through precise weight balance adjustments.  

Read more less

Restore strength and precision to the rear suspension of your 22X with the Team Losi Racing Carbon Fiber Rear Shock Tower. This standard replacement shock tower is designed specifically for the 22X 2WD buggy platform, delivering lightweight rigidity and consistent suspension performance. Features & Benefits: Carbon fiber construction for lightweight strength and durability Standard height replacement for factory rear suspension geometry Precision cut for accurate fit and reliable performance Compatibility: Team Losi Racing 22X 2WD Buggy Includes: (1) Carbon Fiber Rear Shock Tower Perfect for replacing worn or damaged parts while keeping your 22X race-ready  

Read more less

Upgrade your rear suspension with the Factory Team Aluminum Rear Hubs from Team Associated, designed for racers who demand precision, durability, and consistent handling. These CNC-machined aluminum hubs replace the standard plastic parts to deliver improved strength, better bearing support, and a true Factory Team look. About the Aluminum Rear Hubs Race-Focused Performance & GeometryThe -4mm offset fine-tunes rear track width to optimize suspension geometry, improving stability and cornering response—especially on high-grip or technical tracks. Precision machining ensures a direct, stress-free fit, while the anodized finish provides long-lasting wear resistance and a professional race aesthetic. Features CNC-machined aluminum construction Factory Team anodized finish -4mm offset for optimized rear geometry Improved bearing support and consistency Increased durability for competitive racing Includes (1) Left Rear Hub (1) Right Rear Hub (4) Set Screws Compatibility Team Associated RC10 B7 / B7D Team Associated RC10 B84 / B84D Team Associated RC10 SC7 Team Associated RC10 T7 Perfect for racers looking to sharpen rear-end feel, increase reliability, and add Factory Team style to their setup.  

Read more less

Standard or Lightweight The S2 buggy body from JConcepts is a race-proven shell engineered specifically for the Losi 22X (2025) platform. Born from elite competition and refined over years of development, the S2 delivers a low-profile, high-efficiency aerodynamic package for dirt, carpet, or turf. Precision-molded in clear polycarbonate, the S2 features a sleek, symmetrical design with purposeful airflow management to reduce drag and sharpen corner speed. Available in standard or lightweight thickness, it lets racers fine-tune durability versus weight to match track conditions. About the S2 Buggy Body Streamlined Style, Race-Ready PerformanceCAD-designed lines, a dual-window cab, recessed hood cooling area, and trimmable rear scoops work together to enhance airflow and downforce. A stabilizing center fin and rear side rails improve high-speed tracking and durability, while the body wraps cleanly around the spur gear guard for a perfect fit. Features Low-profile shape minimizes drag and boosts corner speed Trimmable rear sidepod scoops for airflow or added downforce Stabilizing center fin & rear side rails for durability and tracking Recessed hood area for cooling and airflow options Precision fit around the TLR spur gear guard Available in Standard or Lightweight materials Includes (1) TLR 22X “S2” 1/10 Buggy Body (Clear) (2) 6.5" Wings (Aero) (1) Decal Sheet (1) Window Masking Sheet Compatibility: Losi 22XTech Note: Painted body shown for illustration only. Product is clear and unpainted.  

Read more less

The Team Losi Racing TLR334076 VHA Hinge Pin Insert Set is an optional tuning pack designed for the 22 5.0 and select 22-series platforms. These inserts allow racers to fine-tune rear suspension geometry by adjusting hinge pin and axle height positions within the VHA system. Ideal for dialing in handling characteristics across different track conditions, this set is a must-have for racers running Variable Height Axle configurations. 🔧 Features Genuine Team Losi Racing option parts Designed for VHA (Variable Height Axle) tuning Allows precise rear suspension geometry adjustments Ideal for setup changes on varying track conditions Direct fit for compatible 22-series platforms 📦 Includes (6) VHA Hinge Pin Inserts ✅ Compatibility Losi 22 5.0 AC Losi 22 5.0 DC Losi 22 5.0 Elite Losi 22 5.0 SR Losi 22X Losi 22X-4 Losi 22X-4 Elite Losi 22X-T Losi TEN-SCTE 3.0

Read more less

Get fast, accurate temperature readings anywhere in your RC setup with the EcoPower Digital Infrared Temp Gauge — a lightweight, compact, non-contact tool designed specifically for RC motors, ESCs, nitro engines, batteries, chargers, and even track surfaces. Just aim, press, and read. Simple, precise, essential. Why Every RC Driver Needs This Gauge Monitoring temps is one of the easiest ways to protect your investment and improve performance. Electric Motors: Prevent demagnetization, wiring damage, and sensor failure — keep temps under ~170°F. ESCs: Avoid capacitor failure or internal board damage. Nitro Engines: Tune with confidence. Most engines like 230–270°F — anything over 290°F risks serious damage. Track Surface: Choose the right tire compound for the conditions. A temp gauge is one of the most important tools any RC racer, crawler, nitro driver, or basher can own. Features: Fast, accurate non-contact temperature readings Measures in °F or °C ±2°C precision for reliable tuning Built-in LED flashlight Data hold function Battery level indicator Ultra-compact & lightweight Includes: (1) EcoPower Digital Infrared Temp Gauge (2) AAA Batteries Specifications: Display: 1.0 × 0.74 in (26.8 × 18.8mm) Temperature Range: –58° to 500°F (–50° to 260°C) Working Temp: –0° to 50°C (–32° to 122°F) Response Time: 0.5 sec Weight: 2.29 oz (65g) Dimensions: 3.64 × 1.77 × 1.16 in (92.5 × 45 × 29.5mm)

Read more less

Experience unmatched power and consistency with the NitroPro 2S 7.4V 8500mAh 140C Low-Profile Stick Pack. Built from the highest-grade proprietary cells available, this battery delivers blistering acceleration, rock-solid voltage retention, and the endurance top racers demand. 🔥 Key Features: High-output 140C continuous discharge for extreme performance Constructed from premium proprietary LiPo cells — maximum punch and reliability Low-profile stick pack design for optimal chassis balance Consistent voltage under heavy load for competitive racing conditions Built to exceed the demands of professional-level drivers ⚙️ Specifications: Voltage: 7.4V (2S) Capacity: 8500mAh Discharge Rate: 140C Dimensions: 25mm (H) x 47mm (W) x 139mm (L) Connector: 5mm bullets Weight: 319g 📦 Includes: (1) NitroPro 2S 7.4V 8500mAh 140C LP Stick Pack 🛡️ Warranty: 90-day manufacturer’s warranty against defects ⚠️ Tip:Balance-charge every cycle and avoid over-discharging (keep cells above 3.2V) for maximum performance and lifespan.

Read more less

Unleash extreme power and efficiency with the Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery. Engineered for competitive RC racing, this pack combines massive capacity, ultra-low internal resistance, and a high 140C discharge rate to deliver stable voltage, explosive acceleration, and unmatched endurance. Perfect for racers who demand consistent performance through the entire run. 🔥 Key Features: High Voltage (LiHV) 7.6V output for maximum speed and power 140C continuous discharge for exceptional punch and consistency 8500mAh capacity delivers long runtime and balanced weight Factory-matched cells for uniform voltage, capacity, and resistance Low IR design ensures stable voltage under heavy load 5mm bullet connectors provide secure, low-loss connections Built using stable automatic stacking technology for reliability Lightweight and low-profile design for chassis balance and fit 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 8500mAh Continuous Discharge: 140C Charge Rate: 1C (8.5A max recommended) Configuration: 2S1P Watt Hours: 64.4Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 139 × 47 × 25mm Weight: 10.65oz (302g) ✅ Compatibility: Ideal for 1/10 & 1/8 scale surface applications Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher racing platforms Works with Touring Car (TC6/TC7 series), 4WD Buggies, Truggies, and Short Course Trucks requiring 2S packs 📦 Includes: (1) Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always balance charge using a LiPo-compatible charger and LiPo safe bag. Never leave charging batteries unattended. Do not overcharge or discharge below 3.2V per cell. Allow batteries to cool completely before recharging. Follow proper break-in procedure for new packs (first 5 cycles at 50% discharge). 🏎️ Recommended For: 1/10 & 1/8 scale Buggy, Truggy, Touring Car, and Short Course Truck racing Ideal for spec and modified classes needing high voltage and long runtime

Read more less

Power your race machine with the Reedy Zappers HV SG6 Ultra Low Profile 2S LiPo Battery. Built for the demands of competitive RC, this pack delivers lightning-fast discharge, superior voltage retention, and rock-solid durability to keep you at peak performance lap after lap. ✅ Ultra Low Profile Design – Lowers center of gravity for sharper handling✅ 135C High Discharge Rating – Delivers extreme power output for racing applications✅ Flat Discharge Curve – Maintains consistent voltage through the entire run✅ State-of-the-Art Chemistry – Reduced internal resistance and improved cycle life✅ Meets Racing Standards – Built to ROAR, EFRA, BRCA, and IFMAR specifications Includes: (1) Zappers HV SG6 2S Ultra Low Profile 135C LiPo Battery (7.6V/6000mAh) 5mm Bullet Connectors Specifications: Nominal Voltage: 7.6V (2S HV LiPo) Capacity: 6000mAh Maximum Charge Rate: 2C (12A) Discharge Rate: 135C Peak Cell Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet (battery), 2mm Bullet (balance) Dimensions (LxWxH): 139 x 47 x 19.5mm (5.47 x 1.85 x 0.77in) Weight: 247g (8.71oz) ROAR Approved: Yes ⚡ Take your racing to the next level with reliable power, ultra-low profile design, and championship-ready performance.

Read more less

Fine-tune your XB2’s rear-end handling with the XRAY Short Rear Anti-Roll Bar series. Designed for precision adjustment, these sway bars control body roll and improve cornering stability, giving you the flexibility to adapt your buggy to any track condition. A softer bar provides more rear grip and smoother steering response, while a stiffer bar sharpens steering and reduces rear traction. Choose the perfect thickness to match your setup! Available Sizes: 1.0mm (323490) – Softest 1.1mm (323491) 1.2mm (323492) 1.3mm (323493) 1.4mm (323494) 1.6mm (323496) – Hardest Effects of Rear Roll Bar Changes: Softer Bar: Increases chassis roll Increases rear grip in corners Decreases on-power steering Car responds more slowly to direction changes Stiffer Bar: Decreases chassis roll Decreases rear grip in corners Increases on-power steering Car responds quicker to direction changes Features: High-quality spring steel construction Short design for precise handling response Essential tuning part for competitive setups Compatibility: XRAY XB2 (All Versions) Includes: (1) Short Rear Anti-Roll Bar (size selected)    

Read more less