Fine-tune your XB2/XB4’s front suspension geometry with the precision-machined XRAY Aluminum Front Lower Arm Mount. Crafted from premium Swiss 7075 T6 aluminum, this mount allows for +3° or -3° arm sweep adjustment, giving racers the flexibility to dial in steering response and overall handling balance. Features: CNC-machined from high-grade Swiss 7075 T6 aluminum for maximum strength and durability Provides +3° or -3° adjustment to fine-tune suspension setup Anodized finish for wear resistance and factory look Precision design ensures a perfect fit with XRAY chassis components Improves handling versatility on varying track conditions Compatibility: XRAY XB2 – 1/10 2WD Buggy (all versions, check manual for exact fit) XRAY XT2 – 1/10 2WD Stadium Truck (all versions, check manual for exact fit) May also fit XB4 platforms depending on configuration (verify with manual) Part Number: 322317

Read more less

Dial in the perfect rear suspension setup with the XRAY 57.5mm Big Bore Rear Conical Spring Set. These precision-engineered springs are designed for XRAY big-bore rear shocks, giving you the flexibility to tune your buggy or stadium truck’s handling to match any track condition. Each spring is color-dot coded from soft (1-Dot) to stiff (5-Dot) for quick identification. Features: Set includes (2) precision-made conical rear springs 57.5mm length, built for XRAY big-bore rear shocks Dot-coded system for easy rate identification Softer springs provide more traction and bump absorption Stiffer springs increase stability and sharpen handling response Spring Rates (Softest → Hardest): 1-Dot – Part #368481 2-Dot – Part #368482 3-Dot – Part #368483 4-Dot – Part #368484 5-Dot – Part #368485 Effects of Shock Spring Changes: Softer: More chassis roll, more rear traction, better bump compliance, but more bottoming out. Stiffer: Less chassis roll, reduced rear traction, quicker response, more stability in high grip. Compatibility: XRAY XB2 – 1/10 2WD Buggy (Rear) XRAY XT2 – 1/10 Stadium Truck (Rear) Other XRAY 57.5mm big-bore rear shock applications (check manual for confirmation).

Read more less

Fine-tune your suspension with the XRAY 42.5mm Big Bore Front Conical Spring Set. Designed for big-bore shocks, these precision-engineered springs allow you to dial in your buggy or stadium truck’s handling for any track condition. Each spring is color-dot coded for quick identification, ranging from soft (1-Dot) to firm (5-Dot). Features: Set includes (2) precision-made conical front springs 42.5mm length, designed for XRAY big-bore shocks Dot-coded system for quick rate identification Softer springs increase traction and absorb bumps Stiffer springs increase responsiveness and reduce chassis roll Spring Rates (Softest → Hardest): 1-Dot – Part #368381 2-Dot – Part #368382 3-Dot – Part #368383 4-Dot – Part #368384 5-Dot – Part #368385 Effects of Shock Spring Changes: Softer: More chassis roll, more traction, smoother on bumps, but more prone to bottoming out. Stiffer: Less chassis roll, less traction, sharper response, improved handling in high grip. Compatibility: XRAY XB2 – 1/10 2WD Buggy (Front) XRAY XT2 – 1/10 Stadium Truck (Front) Other XRAY 42.5mm big-bore front shock applications (check manual for confirmation).

Read more less

Upgrade your drivetrain with the XRAY Composite Adjustment Ball-Bearing Hubs. Engineered for precision and durability, these hubs provide smoother rotation, reduced friction, and consistent performance under high-stress racing conditions. Features: Strong composite construction for lightweight durability Precision ball-bearing design for smoother drivetrain performance Helps reduce slop and improve efficiency Easy installation and long-lasting reliability Includes: (2) Composite Adjustment Ball-Bearing Hubs Compatibility: Fits XRAY XB2 / XT2 / XB4 platforms (check manual for specific fitment)

Read more less

Give your buggy extra front-end stability and sharper cornering response with the XRAY Wide Lexan Front Wing. Designed for high-downforce performance, this wing increases steering in both low and high-speed sections, keeping your car planted and predictable on the track. Features: Molded from lightweight, durable premium Lexan® Wide design for maximum front-end downforce Improves steering response and cornering grip Clear, ready for custom paint or decals Compatibility: XRAY XB2 / XT2 (and other 1/10 buggies that accept 1/10 front wings) Includes: (1) Wide Lexan Front Wing  

Read more less

The XRAY Composite Rear Upright (Lower Position – Graphite) is designed to provide precise handling and durability for your XB2/XB4. The lower roll center mounting gives improved cornering stability, making it an excellent choice for high-traction tracks where control and consistency are key. Features: Graphite composite material for maximum strength and rigidity Lower roll center mounting improves rear traction and stability Designed for high-traction surfaces and competitive setups Precision XRAY engineering ensures perfect fit and long life Compatibility: XRAY XB2 XRAY XB4 Includes: (1) Composite Rear Upright – Lower Position – Graphite

Read more less

Upgrade your XB2 with the XRAY Carbon Rear Shock Tower (4-Dots) for precision handling and durability. Made from high-quality carbon fiber, this shock tower provides the perfect balance of strength and lightweight performance. The 4-dot design gives you multiple shock mounting options, making it easy to fine-tune your suspension for any track condition. Features: Premium carbon fiber construction – lightweight yet rigid 4-dot design for expanded shock mounting adjustability Improves rear suspension tuning and consistency Factory XRAY precision fit and finish Direct replacement for stock rear shock tower Compatibility: XRAY XB2 (all versions requiring 4-dot rear tower) Includes: (1) Carbon Rear Shock Tower – 4-Dots

Read more less

Upgrade your ride with these precision-engineered 55mm Adjustable Turnbuckles, crafted from world-renowned HUDY Spring Steel™ for unmatched strength and durability. Featuring M3 left- and right-hand threads, they allow for easy and precise suspension and steering adjustments without removing them from the car. Features: Premium HUDY Spring Steel™ for maximum lifespan and toughness 55mm length – ideal fit for multiple XB2/XT2 suspension applications M3 left & right threads for fast, fine adjustments Black coating for wear resistance and a pro finish Includes two turnbuckles Compatibility: XRAY XB2 XRAY XT2 Other XRAY models requiring 55mm M3 turnbuckles Includes: (2) 55mm Adjustable Turnbuckles

Read more less

Take your steering precision to the next level with the XRAY Aluminum Steering Plate Set, designed specifically for the 1-piece chassis. Machined from premium Swiss 7075 T6 aluminum, this set ensures maximum strength, rigidity, and durability under the toughest racing conditions. Features: Swiss 7075 T6 aluminum construction for ultimate durability Black anodized finish with XRAY laser engraving Reinforces the steering system for consistent, precise handling Direct fit for XRAY’s 1-piece chassis design Perfect upgrade for racers demanding maximum performance Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (1) Aluminum Steering Plate Set

Read more less

Upgrade your XB2/XT2 with the XRAY Aluminum Steering Arm set, precision-machined from Swiss 7075 T6 aluminum for maximum strength and durability. Designed specifically for use with the 1-piece chassis, these arms deliver consistent, slop-free steering performance. Features: CNC-machined Swiss 7075 T6 aluminum Black anodized finish for style and protection Provides ultra-precise steering feel Direct fit for XRAY 1-piece chassis design Includes left and right aluminum arms (2) Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (2) Aluminum Steering Arms

Read more less

Fine-tune your XB2’s handling with the XRAY 2024 Front Anti-Roll Bars. These sway bars allow you to balance steering response and cornering stability to match track conditions. Overview:Adjusting the front anti-roll bar directly affects steering response and front-end stability: Softer bar (thinner mm): Increases front grip and stability in low-traction conditions Stiffer bar (thicker mm): Reduces body roll for precise cornering but may decrease front-end grip Available Sizes: 0.8mm (Softest) – XRA322489 1.0mm – XRA322490 1.1mm – XRA322491 1.2mm – XRA322492 1.3mm (Hardest) – XRA322493 Effects of Roll Bar Changes: Softer bar: More chassis roll, more cornering grip, slower response Stiffer bar: Less chassis roll, quicker steering response, less cornering grip Compatibility: XRAY XB2 (2024 and later) Includes: (1) Anti-Roll Bar in chosen thickness    

Read more less

Upgrade your XB2/XT2 with the XRAY Aluminum Front Lower Arm Mount (0°). Precision-machined from Swiss 7075 T6 aluminum and finished in sleek black coating, this mount provides rock-solid suspension geometry and long-lasting durability for competitive racing. Features: CNC-machined from premium Swiss 7075 T6 aluminum 0° geometry for precise suspension setup Increases consistency and stability in all conditions Black coated for a factory-team look and added wear protection Direct fit replacement part Compatibility: XRAY XB2 (all versions) XRAY XT2 (all versions) Includes: (1) Aluminum Front Lower Arm Mount 0°  

Read more less

Fine-tune your steering geometry with XRAY’s precision-machined Graphite Steering Block Extension Plates. Available in 1-dot, 2-dot, and 3-dot options, these lightweight graphite plates let you adjust steering response and handling characteristics to match your track and driving style. Features: Made from high-quality graphite for strength and precision Adjusts steering geometry for optimal handling Lightweight, durable construction Direct fit for XB2 & XT2 platforms Includes 2 extension plates per set Dot Options (choose your setup): 1-Dot (322294): Minimal extension – smooth, stable steering 2-Dot (322295): Balanced setting – great all-around response 3-Dot (322296): Maximum extension – aggressive steering feel Compatibility: XRAY XB2 (all versions) XRAY XT2 (all versions) Includes: (2) Graphite Steering Block Extension Plates (select 1-dot, 2-dot, or 3-dot version)

Read more less

Upgrade your front end with XRAY’s Graphite Composite Steering Block for the XB2. Molded from a reinforced graphite composite material, this steering block provides increased strength and precision compared to standard composite parts, ensuring smoother steering response and long-lasting durability. Features: Strong graphite composite material for added rigidity Enhances steering consistency and precision Direct replacement upgrade for stock XB2 steering blocks Lightweight yet durable design Compatibility: XRAY XB2 (all versions) Other XRAY platforms using XB2 steering blocks Includes: (1) Graphite Composite Steering Block – 322250-G

Read more less

Upgrade your steering setup with XRAY’s Graphite Composite C-Hubs for the XB2. Available in Right (322210-G) or Left (322220-G), these hubs are molded from high-strength graphite composite material for improved stiffness, precision, and durability over standard composite parts. Features: Strong graphite composite construction Improves steering precision & consistency Direct replacement for stock XB2 C-hubs Available in Right or Left version Compatibility: XRAY XB2 (all versions) Other XRAY platforms using XB2 C-hubs Includes (choose option): (1) Right C-Hub – 322210-G (1) Left C-Hub – 322220-G

Read more less

Upgrade your XB2 with this Hard Composite Front Left Suspension Arm featuring Low Shock Mounting (LSM) geometry in the short configuration. The Hard material provides extra durability and reduced flex, making it perfect for high-traction surfaces where stability and consistent handling are critical. Features: Hard composite blend for maximum durability and precision Low Shock Mounting (LSM) design optimizes suspension geometry Short length design sharpens steering response Manufactured by XRAY for factory-perfect fit Compatibility: XRAY XB2 (All variants using LSM geometry) Includes: (1) Front Left Suspension Arm – Short – Hard

Read more less

Fine-tune your XB2 with this Graphite Composite Front Left Suspension Arm featuring Low Shock Mounting (LSM) geometry in the short configuration. The Graphite blend offers the perfect balance of rigidity and controlled flex, making it ideal for medium to high-traction tracks where precision and cornering speed are key. Features: Graphite composite material for optimized stiffness and responsiveness Low Shock Mounting (LSM) design improves suspension geometry and handling Short length design for sharper steering response Factory XRAY precision molding for perfect fit Compatibility: XRAY XB2 (All variants using LSM geometry) Includes: (1) Front Left Suspension Arm – Short – Graphite

Read more less

Upgrade your XRAY XB2 with this Hard Composite Front Lower Left Suspension Arm featuring Low Shock Mounting (LSM) geometry. Designed for maximum durability and precision, this arm is ideal for high-traction conditions where reduced flex translates into improved consistency and cornering stability. Features: Hard composite construction for increased stiffness Low Shock Mounting design for improved suspension geometry and handling Factory precision molding for perfect fitment Direct replacement part for easy installation Compatibility: XRAY XB2 (All variants using LSM geometry) Includes: (1) Front Lower Left Suspension Arm – Hard

Read more less

The XRAY XB2 Hard Front Suspension Arm (Right, Short, Low Shock Mounting) is made from a stiffer hard composite material for maximum durability and consistent handling. The short design sharpens steering response, while the low shock mounting (LSM) improves cornering stability on high-traction surfaces. Features: Hard composite material for long life and maximum consistency Short arm design for sharper steering and improved agility Low shock mounting (LSM) for added stability in corners Precision-molded factory replacement part Compatibility: XRAY XB2 (all versions, right side front lower short arm)

Read more less

The XRAY XB2 Graphite Front Suspension Arm (Right, Short, Low Shock Mounting) is crafted from graphite composite material to deliver the perfect balance of strength, stiffness, and responsiveness. The short design improves steering response and corner speed, while the low shock mounting provides increased stability on high-traction tracks. Features: Graphite composite material for enhanced stiffness and precision Short design improves steering response and agility Low shock mounting (LSM) for greater stability and cornering performance Precision-molded factory replacement part Compatibility: XRAY XB2 (all versions, right side front lower short arm)

Read more less

The XRAY XB2 Hard Composite Front Suspension Arm (Right, Lower, Low Shock Mounting) is molded from specially-formulated hard composite material for maximum durability and precise handling. The low shock mounting design lowers the shock position for a more stable setup and improved cornering performance, especially on high-traction tracks. Features: Hard composite material for maximum stiffness and durability Low shock mounting for enhanced stability and cornering Precision-molded for perfect fit and geometry Factory replacement XRAY part Compatibility: XRAY XB2 (all versions, right side front lower arm)

Read more less

The XRAY XB2 Front Outer Pivot Pins are durable, precision-machined replacements engineered to keep your buggy’s suspension tight and consistent. Designed for smooth operation and long-lasting performance, these pins ensure accurate alignment and dependable handling through every race. Features: Precision-machined steel construction Ensures consistent suspension geometry Built for strength and durability Direct replacement for the XB2 buggy Includes:(2) Front Outer Pivot Pins      

Read more less

The XRAY XB2 Front Inner Suspension Pivot Pins are precision-machined replacements built to handle the demands of competitive racing. Designed for strength and accuracy, these pins maintain exact suspension geometry for consistent handling and durability. Features: High-strength steel construction Precision fit for smooth suspension operation Maintains accurate geometry under load Direct replacement for the XB2 buggy Includes:(2) Front Inner Suspension Pivot Pins      

Read more less

The XRAY XB4 2022 Composite Battery Clamp Set is a direct replacement designed to securely hold your battery in place during the most demanding race conditions. Molded from durable composite material, these clamps offer a lightweight and reliable solution while maintaining the factory fit and finish. Features: Precision-molded composite construction Lightweight and durable design Direct fit replacement for the XRAY XB4 2022 Ensures secure battery retention under racing stress Includes:(2) Composite Battery Clamps        

Read more less

The XRAY Composite 48P Slipper Eliminator Spur Gear is a precision-molded 72-tooth spur designed for racers who prefer maximum efficiency and direct power delivery. By eliminating the slipper assembly, this gear reduces rotating mass and ensures a more consistent throttle response, making it ideal for high-traction surfaces where a slipper is not required. Features: 48 pitch, 72-tooth composite spur gear Eliminates slipper clutch for direct drive efficiency Lightweight, precision-molded construction Delivers consistent throttle response Perfect for high-traction racing conditions Includes:(1) 72T Slipper Eliminator Spur Gear      

Read more less

The XRAY XB2 Differential Gasket Set includes four precision-cut gaskets designed for use in the XB2 gear differential. These gaskets provide a tight, consistent seal to prevent oil leakage and ensure smooth, reliable diff performance. Perfect for rebuilds or routine maintenance, they help extend the life of your differential while maintaining peak performance. Features: Precision-cut gaskets for perfect sealing Prevents oil leaks and maintains smooth diff action Durable material for long-lasting reliability Essential for rebuilds and maintenance Designed for XRAY XB2 vehicles Includes:(4) Differential Gaskets    

Read more less

The XRAY LCG Narrow Gear Differential Assembly Set is a complete, factory-precision unit designed for the XB2, XB4, and XT2 platforms. This low center of gravity (LCG) design lowers weight placement, improving corner speed, stability, and overall handling balance. Built with XRAY’s renowned attention to detail, this differential offers smoother power delivery and enhanced consistency during long runs. Features: Complete pre-assembled gear differential for quick installation LCG design improves cornering stability and reduces chassis roll Precision-molded composite and hardened steel components for durability Optimized sealing system for reduced leakage and longer maintenance intervals Direct factory replacement for XRAY XB2, XB4, and XT2 vehicles Includes:(1) XRAY LCG Narrow Gear Differential Assembly (fully built)  

Read more less

The XRAY XB2 Composite Idler Gear is the direct replacement 25-tooth idler gear for the XB2 1/10 scale buggy. Precision molded for durability and smooth drivetrain operation, this gear keeps your XB2 running strong with consistent performance. Features: Genuine XRAY replacement part Composite construction for strength and low wear Smooth, efficient power transfer 25-tooth idler gear Compatibility: XRAY XB2 1/10 Buggy Includes: (1) 25T Composite Idler Gear  

Read more less

Maximize efficiency and longevity with the Team Associated RC10B7 Factory Team Bearing Set. Featuring high-quality sealed bearings, this upgrade reduces friction, improves drivetrain smoothness, and delivers long-lasting, trouble-free performance for competitive racing. Features: Premium sealed bearings for protection against dirt and debris Low-friction design for smoother, more efficient operation Factory Team quality for professional-level performance and durability Direct fit for the RC10B7 buggy Includes: (1) Complete Factory Team Bearing Set for RC10B7 A must-have upgrade for racers who want maximum drivetrain efficiency and reliability.

Read more less

🌪️ Dial in the front-end feel. The JConcepts Aero Narrow Front Wing is purpose-built for high-speed, high-grip tracks—designed to deliver a lighter steering feel while maintaining front-end downforce and balance. Engineered for the Team Associated B6/B6D with gullwing arms, this wing features a V-angle, high-attack profile and trim-able rear gurney for fine-tuned aero performance. ✅ Fits B6/B6D with gullwing front arms✅ Narrow design = lighter feel up front✅ High-attack V-shape for clean air and aggressive steering✅ Triple mount dimples for easy install✅ Compliments Finnisher & Silencer bodies 📦 Includes:• (2) Aero Narrow Front Wings• Trim lines & mounting dimples included Precision aero. Proven performance. JConcepts delivers.  

Read more less

🔥 Pure Performance in Every Joint.Step up your soldering game with PUREFUSION™—the elite, lead-free solder designed for high-performance RC, drone, and electronics work. This Sn99.3Cu0.7 alloy delivers ultra-low resistance, superior flow, and a clean, consistent melt for pro-level connections every time. 🧪 Specs: Alloy: Sn99.3Cu0.7 (Lead-Free) Diameter: 1.0mm Flux Core: Rosin, No-Clean Melting Point: ~227°C Conductivity: Optimized for high-current, low-loss joints Residue: Minimal & non-corrosive 🛠️ Includes: 15g compact travel tube – ideal for pit bags, toolboxes, and field kits 💡 Why PureFusion? Ultra-low oxidation Superior wetting & flow Designed for clean, professional results—no mess, no compromise 💥 Whether you're rewiring on the bench or fixing in the field, PUREFUSION keeps your connections solid and your builds clean.  

Read more less

Protect your workspace and make every cut count with the Excel Self-Healing Cutting Mat. Designed for hobbyists, crafters, and designers, this 18x24" mat features a self-healing surface that absorbs cuts from sharp tools, preserving the mat and extending its life. With a 1" grid pattern for precise alignment and durable flexible PVC construction, it’s a must-have for any serious project bench. 🟢 Key Features: Self-healing surface absorbs cuts and retains smoothness 1" grid pattern ensures accurate cuts and measurements Protects your workspace from blade damage Made from high-quality flexible PVC for long-term use Ideal for hobby, craft, design, and modeling projects 📐 Specifications: Size: 18" x 24" Material: Flexible PVC Color: Green Includes: (1) Cutting Mat 🛠️ A reliable, precision-friendly surface for every sharp project you take on.

Read more less

💥 Domed for Performance. Bleeder for Precision.Upgrade your suspension with the TLR Aluminum G3 Domed Bleeder Shock Caps, engineered for racers who demand consistent damping, better landings, and refined tuning. These precision CNC-machined aluminum caps are lightweight, durable, and a direct fit for G3 shock bodies found in the 22 5.0 AC, DC, SR, Elite, and 22X-4 kits. 🔧 Features: Domed internal shape mimics Gen2 caps for better shock action Enhanced support and improved landing characteristics Integrated bleeder design allows precise, mess-free bleeding CNC-machined aluminum for strength without the weight Fits G3 shock bodies used in 22 5.0 & 22X-4 platforms 📦 Includes: (2) Domed Bleeder Shock Caps Bleeder screws and seals (pre-installed) 💪 Whether you’re dialing in for high traction or big jumps, these caps give your suspension the edge it needs to perform at its best.

Read more less

Unlock instant throttle response and maximum efficiency with the Team Losi Racing 22X Slipper Eliminator Plates Set — the ultimate upgrade for stock class racers aiming to shave weight and dominate on high-traction tracks. 🔧 Features: Designed specifically for stock racing applications Lightweight CNC-machined aluminum construction Hard anodized for extra strength and sleek looks Eliminates slipper assembly for direct power transfer Reduces rotating mass for quicker acceleration Rigid design ensures consistent drivetrain performance 📦 Includes: (1) Aluminum Slipper Eliminator Plates Set ⚠️ Tech Note: Not recommended for modified racing due to increased drivetrain stress. ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Boost your 22X’s performance and durability with this CNC-machined Aluminum Gear Differential Cover from Team Losi Racing. Designed for racers who push their cars to the limit, this cover eliminates flex, protects your diff, and helps manage heat during hard off-road runs. 🔧 Features: CNC-machined aluminum for precision fit Improves heat dissipation during high-load conditions Rigid construction reduces flex and enhances handling Long-lasting protection for your gear differential Lightweight and race-tested 📦 Includes: (1) Aluminum Gear Differential Cover (1) Gasket (1) Spacer ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Upgrade or replace your buggy’s shocks with this set of Team Losi Racing 13mm Composite Shock Caps, built specifically for the 22X platform. Designed for precision fit and durability, these shock caps help keep your suspension smooth and race-ready. 🛠️ Features: Durable composite construction Direct fit replacement for 13mm shocks Lightweight design to maintain performance 📦 Includes: (2) 13mm Composite Shock Caps ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less