Keep your Team Associated RC28R running smooth with this genuine Rear Pod & Axle Carrier Set. Designed as a direct factory replacement, this assembly restores proper alignment, durability, and smooth rear-axle operation for your RC28R micro racer. ✅ OEM Replacement – Perfect fit and function for RC28R chassis✅ Durable Construction – Built to handle high-speed micro racing✅ Factory Precision – Ensures correct axle spacing and smooth drivetrain operation✅ Quick Install – Swap out worn or damaged parts easily Includes: (1) Rear Pod & Axle Carrier Set Compatibility: Team Associated RC28R ⚡ Restore your rear-end performance and keep your RC28R dialed with this precision-fit replacement set.

Read more less

Upgrade your touring car’s performance with the LC Racing C8071 3mm Carbon Fiber Rear Shock Tower. Built for precision and durability, this lightweight tower improves rear suspension response, consistency, and overall chassis balance for competitive track driving. 🔥 Key Features: 3mm genuine carbon fiber construction for optimal strength-to-weight ratio Precision CNC-cut mounting holes for accurate shock and camber link placement Improves rear end rigidity for stable cornering and predictable handling Direct OEM replacement — no modification required Perfect for racers seeking reduced flex and enhanced feedback ✅ Compatibility: LC Racing PTG-2TC Touring Car 📦 Includes: (1) 3mm carbon fiber rear shock tower ⚠️ Tip:Tighten screws evenly to avoid twisting the tower. Use small washers under mounting hardware to distribute pressure and protect the carbon finish.

Read more less

Increase chassis stiffness and tuning precision with the LC Racing C8070 3mm Carbon Fiber Front Shock Tower. This lightweight, high-strength upgrade provides improved shock response, enhanced cornering consistency, and a professional race-ready look for your PTG-2TC touring car. 🔥 Key Features: 3mm genuine carbon fiber construction for lightweight strength Precision-cut mounting holes for accurate suspension geometry Reduces flex in the front end for sharper handling Direct replacement for the stock composite shock tower Designed specifically for LC Racing’s PTG-2TC touring platform ✅ Compatibility: LC Racing PTG-2TC Touring Car 📦 Includes: (1) 3mm carbon fiber front shock tower ⚠️ Tip:Use thread-lock on the upper shock mount screws and avoid overtightening to prevent crushing the carbon weave.

Read more less

Upgrade your driveline with the LC Racing C8067 Wheel Hub Hex 8mm Set, designed for strength, precision, and consistent wheel fitment. These hubs provide a secure connection between the axle and wheel, ensuring reliable traction and true rotation under race conditions. 🔥 Key Features: Genuine LC Racing OEM replacement part Precision-machined 8mm hex for perfect wheel alignment Aluminum construction for durability and improved power transfer Lightweight design maintains low rotating mass Direct fit — installs easily with standard hardware ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (4) 8mm aluminum wheel hex hubs (4) Retaining pins ⚠️ Tip:Apply a small amount of grease to the drive pins before installation to prevent binding and make future maintenance easier.  

Read more less

Fine-tune your chassis balance with the LC Racing C8066 Sway Bar Set. Designed to reduce body roll and improve stability, this set provides consistent handling through corners while maintaining traction and control. 🔥 Key Features: Genuine LC Racing OEM replacement and tuning part Includes multiple sway bar options for precise suspension tuning Helps balance front-to-rear roll stiffness for smoother cornering Improves overall handling and mid-corner stability Direct fit — no modifications required ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: Complete sway bar set with hardware and mounting components ⚠️ Tip:Use softer sway bars for bumpy or low-grip tracks to increase traction, and stiffer bars for high-grip surfaces to sharpen response.

Read more less

Restore your handling precision with the LC Racing C8065 Rear Suspension Arms, designed for durability and perfect fitment on PTG-2 and PTG-2R chassis. These factory replacement arms maintain proper suspension geometry and flex characteristics for consistent rear traction on every surface. 🔥 Key Features: Genuine LC Racing replacement part Molded composite construction for strength and controlled flex Maintains correct toe, camber, and alignment under load Ideal for racing or general maintenance rebuilds Direct OEM fit — no modifications required ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (2) Rear suspension arms ⚠️ Tip:Inspect hinge pins and arm mounts when replacing — worn hardware can cause play and inconsistent handling.  

Read more less

Maintain precise handling and durability with the LC Racing C8064 Front Suspension Arms. Designed for strength and balanced flex, these arms ensure smooth suspension movement and reliable performance on or off the track. 🔥 Key Features: Genuine LC Racing OEM replacement part Molded composite material for optimal rigidity and controlled flex Maintains correct front geometry and alignment Direct bolt-on fit — no modifications needed Ideal for crash repair or scheduled maintenance ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (2) Front suspension arms ⚠️ Tip:Inspect hinge pins and arm mounts for wear before installation. Replacing worn components together ensures consistent suspension performance and even tire wear.

Read more less

Refresh your vehicle’s steering precision with the LC Racing C8062 Steering Block. This OEM replacement maintains crisp, consistent steering action and supports proper caster geometry under race conditions. 🔥 Key Features: Molded composite material for strength and impact resistance Designed to maintain torque wrap and responsive steering feedback Direct OEM form, fit, and function replacement Supports precise alignment in racing setups ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (2) Steering blocks (left & right) ⚠️ Tip:After installation, check for any binding at ball studs and arm pivots. Use matching ball studs and recheck camber/steering toe setup.

Read more less

Restore precise front-end geometry with the LC Racing C8061 C-Hub Set. These factory replacement hubs ensure smooth steering movement, accurate caster angle, and proper suspension alignment under race conditions. 🔥 Key Features: Genuine LC Racing OEM replacement part Molded composite construction for strength and controlled flex Maintains factory caster angle for balanced steering response Direct fit with stock hardware — no modifications required Ideal for maintenance or tuning rebuilds ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Left C-Hub (1) Right C-Hub ⚠️ Tip:Inspect hinge pins and steering knuckles during installation — worn parts can cause excessive play or uneven tire wear.

Read more less

Keep your steering and suspension geometry precise with the LC Racing C8060 Upright Set. These factory replacement parts provide strong, reliable wheel support while maintaining the correct kingpin angle and toe alignment for smooth, accurate handling. 🔥 Key Features: Genuine LC Racing OEM replacement part Molded composite uprights for balanced strength and lightweight performance Ensures proper wheel alignment and smooth bearing fitment Direct fit design — no modifications needed Ideal for routine maintenance or crash repairs ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Left upright (1) Right upright ⚠️ Tip:Check bearings and kingpins during installation — replace any worn parts to prevent steering wobble or uneven tire wear.

Read more less

Adjust your body height and fitment with the LC Racing C8043 Body Post Extender Set. Designed for precise, secure mounting, these extenders allow additional clearance for taller bodies or custom shell setups while maintaining a factory look and strength. 🔥 Key Features: Genuine LC Racing replacement part Durable molded composite construction Allows adjustable body height for various shell styles Maintains proper post alignment and rigidity Simple installation with OEM hardware ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Complete body post extender set ⚠️ Tip:Use thread-safe body clips or O-rings to prevent body post rattle during high-speed runs or crashes.

Read more less

Protect your chassis and components with the LC Racing C8040 Bumper Set, engineered to absorb impact and maintain the integrity of your vehicle’s front end. 🔥 Key Features: Durable molded composite construction Designed to flex and absorb shock during collisions Precisely dimensioned for an exact fit and protection coverage Direct OEM replacement — no trimming or modifications required ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Front bumper (1) Rear bumper or bumper hardware as per OEM spec ⚠️ Tip:After installation, ensure bumper is aligned square and test for interference with body shell or chassis parts.

Read more less

Enhance drivetrain strength with the LC Racing C8034 Metal Outdrive, engineered to handle higher torque demands and improve reliability under racing loads. 🔥 Key Features: CNC-machined metal construction for durability and wear resistance Precision tolerances for smooth operation and reduced backlash Ideal upgrade over stock composite outdrives Direct fit replacement—no modifications needed ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Metal outdrive gear piece (front or rear fit as required) ⚠️ Tip:Check gear mesh carefully and re-grease when installing. Misaligned outdrives can cause gear chatter or drivetrain binding.    

Read more less

Refresh critical mounting points with the LC Racing 5.5mm Ball Cup + Body Post set. Durable molded parts restore snug, slop-free steering/suspension links and secure body mounting for consistent handling and fit. 🔥 Key Features: 5.5mm ball cups for smooth, precise linkage movement Body post provides secure, adjustable shell mounting Molded composite construction for strength and long life Direct OEM replacement—no mods needed ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: 5.5mm ball cups (assorted) Body post with mounting hardware (as supplied by LC Racing) ⚠️ Tip:Replace worn ball cups in pairs to keep left/right linkage length equal. After install, recheck toe, camber, and body height.  

Read more less

Reinforce your rear suspension with the LC Racing C8025 Aluminum Rear Shock Tower, offering durability and precise damping response. 🔥 Key Features: CNC-machined aluminum design Multiple shock mounting positions for fine tuning Stronger and stiffer than composite stock version Enhances suspension feel and reliability ✅ Compatibility: LC Racing PTG-2 / PTG-2R 📦 Includes: (1) Aluminum rear shock tower ⚠️ Tip:Re-check camber and ride height after installation — aluminum towers can slightly alter geometry.    

Read more less

Upgrade your drivetrain precision with the LC Racing C8022 Motor Mount, engineered for perfect gear mesh and improved rigidity. 🔥 Key Features: CNC-machined aluminum construction Provides secure motor positioning and heat dissipation Precision tolerances for smooth spur/pinion engagement Direct OEM replacement for LC Racing platforms ✅ Compatibility: LC Racing PTG-2 / PTG-2R 📦 Includes: (1) Aluminum motor mount assembly ⚠️ Tip:Double-check gear mesh and apply thread lock to mounting screws for optimal performance.  

Read more less

An essential gearing option, this 70-tooth spur gear delivers consistent power transfer in the 48-pitch gearing system. 🔥 Key Features: 48 pitch, 70T spur gear Molded/deep-cut finish with precise tooth profile Quality steel/composite blend for good endurance ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) 70T 48-pitch spur gear ⚠️ Tip:Ensure proper mesh with the pinion gear and verify that backlash is within spec for smooth power delivery.

Read more less

Sturdy steel arm mounts to replace stock or upgrade for more rigidity. 🔥 Key Features: Steel construction for higher strength and durability over composite options Set includes upper and lower arm mounts Precision-machined dimensions for perfect suspension geometry ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: Full arm mount set (steel) for both sides ⚠️ Tip:Check alignment and clearance during installation — steel mounts shift suspension stiffness and may require repositioning.

Read more less

All-in-one bevel drive assembly, built to give long-lasting drivetrain performance. 🔥 Key Features: Steel bevel gear, spur gear, shaft & outdrive included Built for durability under high stress OEM-grade replacement for rally / touring setups ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Bevel drive gear with integrated spur, shaft & outdrive ⚠️ Tip:Ensure correct backlash and mesh with your pinion when installing, and use high-quality grease for the bevel gear interface.

Read more less

Precision replacement or upgrade drive shafts for your rally or touring platform. 🔥 Key Features: Complete front + rear drive shaft set Hardened steel construction for strength and reliability Designed to exact OEM spec for smooth drivetrain operation ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (2) Front & Rear drive shafts (matched set) Grease spline areas lightly before install and check for straightness — bent shafts degrade handling and increase wear.

Read more less

Upgrade or refresh your differential drive system with this gear diff outdrive suitable for multiple LC Racing rally and touring platforms. 🔥 Key Features: Machined diff outdrive gear for long life Compatible with front or rear differential applications OEM spec replacement for PTG-2 / PTG-2R / PTG-2TC ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R LC Racing PTG-2TC (touring car variant) 📦 Includes: (1) Diff outdrive gear (single piece) ⚠️ Tip:Ensure proper mesh with pinion and ring gear. Re-grease or inspect diff before use after install.  

Read more less

Restore adjustability and precision with this steel turnbuckle set designed for the PTG-2 / PTG-2R rally platforms. 🔥 Key Features: Hardened steel construction for durability Full turnbuckle set for front/rear use Direct replacement for PTG-2 / PTG-2R OEM parts ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: Complete turnbuckle hardware set ⚠️ Tip:After installation, check for smooth rotation and correct thread pitch. Use thread lock sparingly on ends (not the center turnbuckle adjustment section).  

Read more less

This adjustable bevel drive assembly provides reliable power transfer to your drivetrain. 🔥 Key Features: Steel bevel gear, integrated shaft, and outdrive High strength for long life OEM spec replacement ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Bevel drive gear + shaft + outdrive ⚠️ Tip: Check for backlash and mesh clearance during install. Use proper grease or diff oil as needed.

Read more less

Replace or upgrade your front and rear gearboxes all at once with this complete set — great for overhaul builds. 🔥 Key Features: Includes both front and rear gearbox housings/assemblies Durable composite / alloy construction Designed for direct drop-in replacement ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R 📦 Includes: (1) Front gearbox (1) Rear gearbox ⚠️ Tip: Reuse or replace internal gear sets as needed, and grease before installation.

Read more less

Restore smooth suspension movement with this hinge pin & set screw kit — indispensable for maintenance or rebuilding. 🔥 Key Features: Hardened steel hinge pins + matching set screws OEM spec replacement kit Ensures proper suspension geometry and smooth arm movement ✅ Compatibility: LC Racing PTG-2  LC Racing PTG-2R  📦 Includes: Multiple hinge pins & set screws (full set for one vehicle) ⚠️ Tip: Check pins for bend during routine inspection; replace at first sign of wear to preserve handling.    

Read more less

Upgrade your chassis’s front-end geometry with this complete Steering Block + C-Hub + Upright set. Ideal for maintenance or performance tuning. 🔥 Key Features: Full composite set: steering block, C-hub, upright Factory replacement / upgrade piece Precision-molded for durability and fit ✅ Compatibility: LC Racing PTG-2 LC Racing PTG-2R  📦 Includes: (2) Steering Blocks (2) C-Hubs (2) Uprights ⚠️ Tip: Check alignment, camber, and steering bind after install. Use threadlock on hardware in high-stress runs.  

Read more less

Keep your suspension strong and reliable with the Traxxas X-Maxx Rear Shock Tower. Designed as a direct replacement, this shock tower set includes both left and right halves for a complete installation. Built from heavy-duty composite materials, it delivers the durability and strength needed to handle the extreme demands of the X-Maxx. ✅ Complete Set – Includes both left and right halves✅ Heavy-Duty Composite – Built tough for extreme off-road use✅ Direct Replacement – Genuine Traxxas part for perfect fit Compatibility: Traxxas X-Maxx Includes: (1) Left Shock Tower Half (1) Right Shock Tower Half ⚡ Maintain peak performance and durability — replace worn parts with the genuine Traxxas X-Maxx Rear Shock Tower.

Read more less

Upgrade your ride with the Traxxas 2.8" Talon Tires, pre-mounted on All-Star mirror chrome wheels. These tires deliver all-terrain versatility with a long-wear tread pattern, soft rubber compound, and precision foam inserts. Whether you’re bashing on asphalt, dirt, rocks, or grass — the Talons are built to handle it all with style. ✅ All-Terrain Traction – Soft compound + foam inserts for grip on any surface✅ Durable Tread Pattern – Long-lasting performance with tapered edges to reduce traction roll✅ Pre-Glued Convenience – Ready to install and hit the ground running✅ Mirror-Chrome Wheels – Bold looks with strong, lightweight nylon construction Compatibility: Traxxas Hoss Traxxas Nitro Stampede Traxxas Stampede 2WD Traxxas Stampede 4X4 Includes: (2) Talon 2.8" Tires (w/foam inserts) (2) All-Star Mirror Chrome Wheels (pre-mounted) ⚡ Run harder, grip longer, and look sharper — the Talon 2.8" tire & wheel set is the upgrade your truck deserves.

Read more less

Get your buggy rolling smooth again with the FastEddy RC8B3.2e Team Sealed Bearing Kit. Instead of piecing together individual bearings (and paying more than you need), this complete kit includes all the high-quality rubber-sealed steel bearings required for your RC8B3.2e. Built for durability and performance, these bearings reduce friction, protect against dirt and debris, and keep your drivetrain efficient. 🔥 Key Features: Complete bearing set tailored for the RC8B3.2e High-quality rubber-sealed steel bearings Protects against dust, dirt, and moisture Reduces friction for smoother performance Saves money vs. buying bearings individually ✅ Compatibility: Team Associated RC8B3.2e 📦 Includes: (4) 5x8x2.5 (2) 5x10x4 (4) 6x10x3 (4) 6x12x4 (6) 8x16x5 (4) 8x16x5 Flanged (4) 15x21x4 ⚠️ Note:Bearing sizes may vary depending on production run or installed hop-ups. Please double-check your RC8B3.2e before ordering to confirm fit.  

Read more less

Keep your micro racer strong and reliable with the Team Associated RC28R Chassis Plate. Precision-engineered for the RC28R platform, this lightweight yet durable plate is the foundation of your car—supporting the motor, suspension, battery, and more. 🔥 Key Features: Genuine Team Associated replacement part Durable molded design for long-lasting use Lightweight construction for efficient performance Provides a stable mounting base for all key components ✅ Compatibility: Team Associated RC28R 📦 Includes: (1) RC28R Chassis Plate (Black) ⚠️ Tip:When swapping chassis plates, check screws and mounting hardware for wear and replace as needed.

Read more less

Keep your RC10TC8 running smooth and reliable with this genuine Team Associated replacement part. The 38T Differential Case is designed specifically for the RC10TC8 platform, ensuring precision fit and long-lasting performance. Perfect for maintaining your drivetrain and keeping you race-ready. Features: Official Team Associated replacement part Designed for the RC10TC8 platform Durable construction for smooth differential operation Includes: (1) Differential Case (38T)

Read more less

Upgrade your PN Lexan Pan Car Body setup with the Carbon Fiber Front Bumper (600800E). Lightweight, durable, and precision-cut, this bumper improves rigidity and provides secure mounting for serious Mini-Z racers. ✅ High-Strength Carbon Fiber – Strong and lightweight for competitive racing✅ Precision Fit – Designed specifically for PN Lexan Pan Car Body systems✅ Easy Upgrade – Direct replacement for the stock fiberglass bumper Requirements: PN Lexan Pan Car Body (600800A) PN Lexan Pan Car Body Mount Posts (600800D) Material: Carbon FiberPart #: 600800E Take your Mini-Z pan car build to the next level with carbon precision and race-ready durability.

Read more less

The Atomic MRX Master Touring Lexan Body Mount is engineered specifically for the MRX Master chassis to provide a secure, lightweight, and stable mounting solution for touring-style lexan bodies. Precision-made to deliver durability without sacrificing performance, this body mount is the perfect upgrade for serious racers. ⚡ Features: Direct fit for Atomic MRX Master chassis Optimized for touring-style lexan bodies Lightweight design helps maintain chassis balance Strong, durable construction for long-lasting use Quick and easy installation Part #: MRXME-UP04-B

Read more less

Compact, efficient, and competition-ready — the Rocket-RC TS80-PRO 80A Brushless Sensored ESC is designed for 1/10 stock class racing and 1/14 scale competition. With precision engineering and powerful output, it delivers smooth throttle control, reliable braking, and durability for serious racers. ⚡ Features: Compact size perfect for 1/14 & 1/10 scale vehicles Efficient aluminum casing with machined heatsink High-performance cooling fan (23,000 RPM @ 7.2V) Built-in Super BEC for stable power delivery Programmable with optional LED V2 Program Card (KS-300004-00) Pre-installed XT60 battery connector Factory preset: Forward/Brake (can be adjusted to Forward/Brake/Reverse) 🔧 Specifications: Dimensions: 29.5 x 29.5 x 24mm (with fan) Weight: 62g (with wires) Voltage Input: 6V–11V (2S LiPo) Continuous Current: 80A Peak Current: 160A Motor Limit: Over 13.5T (540) / Over 10.5T (380/390) Motor Type: Sensored 380 / 390 / 540 Brushless Motors BEC: 3A / 6V Multi-Protection System: Yes 📦 Includes: (1) Rocket-RC TS80-PRO 80A Brushless Sensored ESC XT60 Battery Connector (installed)

Read more less

Keep your suspension tight and responsive with the Arrma 2.5x24mm Hingepin Set. Built from high-quality steel, these pins are designed as direct replacements for worn or damaged stock components, ensuring smooth suspension performance and long-lasting durability. ⚡ Features: Precision steel construction Direct replacement for stock kit components Provides smooth, consistent suspension movement Strong and durable for extreme RC action 📦 Includes: (4) 2.5x24mm Hingepins Part #: ARA320751

Read more less

Upgrade your Pro Scale Sand Car with the Hardened Steel Front Suspension Pin Set. Built for extreme durability, these precision-engineered suspension pins replace stock components to withstand the toughest terrain and hardest impacts. ⚡ Features: Hardened steel construction for maximum strength Precision fit for smooth suspension performance Direct replacement for stock parts Designed for high-stress off-road conditions 📦 Includes: (1) Hardened Steel Front Suspension Pin Set Compatibility: Traxxas Pro Scale Sand Car (Model #109076-4) Part #: 10940  

Read more less