Power up with confidence using the Gens Ace G-Tech Smart 2S 5300mAh 60C LiPo. Designed for drivers who demand low resistance, strong punch, and consistent runtime, this pack delivers outstanding performance across a wide range of RC applications. Built from factory-matched, low IR cells, it provides stable voltage output throughout the entire discharge cycle — meaning more power at throttle, longer runtime, and dependable delivery under heavy loads. 🧠 Smart G-Tech Technology Built-In Advanced smart tech monitors, records, and optimizes battery performance automatically. Smart features include: Auto identification of battery parameters Intelligent charge settings for enhanced safety Embedded smart balance plug with proprietary chip Protection and extended lifespan for your pack Smarter charging = safer performance, longer life. 🔋 High-Performance Power Delivery With a 60C continuous discharge rating and 100C peak bursts, this pack delivers serious punch for demanding setups, speed runs, and high-torque applications. Specifications Spec Value Voltage 7.4V (2S) Capacity 5300mAh Maximum Charge Rate 5C (26.5A) Continuous Discharge 60C Peak Discharge 100C Cell Configuration 2S1P Watt Hours 39.22Wh ROAR Approved No Connector Universal Balance G-Tech Smart Connector Dimensions 138.5x47x25.5mm Weight 275.5g What’s Included (1) Gens Ace G-Tech 2S 5300mAh 60C LiPo Battery w/Universal Connector ⚠️ Notes Use with a compatible LiPo charger Smart balance connector requires G-Tech support Follow proper LiPo storage, charging, and handling procedures

Read more less

The Hobbywing EZRun MINI28 Sensored Brushless ESC delivers next-level control and tuning in a tiny footprint — purpose-built for competitive 1/28-scale racing. Don’t let the size fool you… this ESC is absolutely loaded with features normally seen only on full-size race systems. At just 22.7 × 14.2 × 11.8mm, it fits cleanly into nearly any Mini-Z–style chassis, while the integrated aluminum heat sink keeps temps under control during hard runs. With 26 adjustable parameters, a high-voltage BEC, and OTA wireless programming (via optional module), the MINI28 gives racers every tuning edge possible. Key Features Designed specifically for 1/28-scale racing performance Ultra-compact and lightweight for tight chassis layouts Large integrated aluminum heat sink for temperature control High-voltage adjustable BEC (6V or 7.4V, 3.5A peak) Compatible with sensored and sensorless brushless motors Dual-mode App support (requires optional Hobbywing OTA module) Packed with 26 adjustable ESC tuning parameters Ideal for Mini-Z, GL Racing, PN, and other 1/28 platforms Specifications Continuous / Peak Current: 30A / 80A Motor Type: Sensored or Sensorless Brushless Motor Limit: 1626 size motors Battery: 2S LiPo BEC Output: 6V / 7.4V adjustable, 3.5A peak Dimensions: 22.7 × 14.2 × 11.8mm Weight: 5g (without wires) Programming: Via throttle cable or OTA module (sold separately) Includes (1) Hobbywing EZRun MINI28 Sensored Brushless ESC (1) ESC Manual Wiring harnesses

Read more less

Spur Gear Overview: Keep your drivetrain running smooth and efficient with the Team Associated RC10TC8 64P 92-Tooth Spur Gear. Designed specifically for the RC10TC8 chassis, this precision-cut gear delivers consistent mesh, quiet operation, and dependable durability — perfect for both racing and high-performance touring setups. A must-have replacement item for wear, damage, or gearing adjustments. Features Precision-molded 64 pitch gear profile Smooth, reliable operation for competitive on-road racing Direct factory replacement for the RC10TC8 Ideal for fine-tuning gearing and performance Compatibility Team Associated RC10TC8 Includes (1) 92T 64P Spur Gear

Read more less

Keep your drivetrain smooth and reliable with this pair of genuine Team Associated RC10B74 Center Differential Outdrives. Designed specifically for the center differential, these outdrives restore proper fit, durability, and power transfer — essential for maintaining peak performance in your B74 platform. Perfect for routine maintenance, worn-out parts, or keeping a spare set ready for race day. Features Genuine Team Associated replacement part Precision-machined for smooth power delivery Durable construction for demanding 4WD competition Direct factory fit — no modifications required Compatibility RC10B74(Center differential use only — not compatible with front or rear diffs) Includes (2) Center Differential Outdrives

Read more less

Motor Overview:The Team Exalt XLR8 1/8 Sensored Brushless Long Can Truggy Motor is built from the ground up for racers who demand top-tier speed, torque, smoothness, and durability in 1/8 truggy competition. Engineered around a long 74mm can, this motor packs massive punch while maintaining ultra-refined control thanks to its advanced sensing system and premium internal design. A staggered-magnet rotor delivers both low-drag efficiency and huge torque, while the high-purity copper windings and heat-resistant magnet formula ensure consistent performance run after run. Add in a fully rebuildable architecture — including a replaceable sensor board — and you’ve got a high-end truggy motor designed to win championships and take abuse doing it. To keep temps under control even in brutal racing conditions, Exalt uses a 2mm-thick aluminum can paired with ventilation ports that allow airflow in while keeping debris out. The result is a high-power 1/8 truggy motor that stays cool, reliable, and consistent all day long. Features: Long-can 74mm design for extreme torque & power Staggered-magnet rotor for low drag and incredible punch Adjustable timing from 0–40° (CW/CCW) Sensored & sensorless compatible Rebuildable with replaceable sensor board High-purity copper windings High-strength, heat-resistant magnet formula Top-quality alloy steel 5mm output shaft Advanced hall-sensing separation design for smoother throttle response Large vent ports for airflow while blocking debris ROAR Approved! Specifications: Type: Sensored Brushless kV: 2350kV Voltage: 2–4S LiPo (7.4–14.8V) Poles: 4 Timing: 0–40° Adjustable (CW/CCW) Diameter: 41.8mm (1.645") Length: 74mm (2.91") Shaft Diameter: 5mm Shaft Length: 17.7mm (0.696") Weight: 386g (13.6oz) Application: 1/8 Truggy Competition Includes: (1) Team Exalt XLR8 1/8 Sensored Brushless Long Can Truggy Motor (2350kV) (1) Sensor Wire

Read more less

Keep your Mini-Z running flawlessly with the Kyosho Motor Sensor Wire (80mm) — a genuine replacement part designed for smooth, reliable sensor connection between your ESC and motor. Perfect for maintaining optimal brushless performance on the Mini-Z MR-03 and MR-04 platforms. ⚙️ Features: Genuine Kyosho replacement sensor wire Designed for Mini-Z MR-03 and MR-04 brushless systems Provides accurate motor feedback for smooth, consistent throttle response Durable 80mm wire length for clean, secure fit 📦 Includes: (1) 80mm Motor Sensor Wire  

Read more less

The Reedy Sonic 540-FT 13.5T Competition Brushless Motor delivers professional-level performance at an affordable price. Designed for spec racing, clubs, and racing series where equalized performance is key, this ROAR-approved motor combines precision engineering with durability and ease of maintenance. Featuring a lightweight CNC-machined can, high-strength balanced rotor, and dual ball bearings for smooth operation, the 540-FT offers exceptional value without compromising performance. Its fixed 45-degree timing ensures consistent power delivery and reliability for all racers. ⚙️ Features: CNC-machined lightweight aluminum can for superior cooling and precision High-strength balanced rotor for smooth, efficient operation Dual precision ball bearings for long-lasting performance Fixed 45° timing for consistency and spec-class fairness Easy-to-solder tabs for clean wiring and quick installation Fully rebuildable design for extended motor life ROAR approved for sanctioned competition use 📏 Specifications: Turns: 13.5T Timing: Fixed (45°) Input Voltage: 1–2S LiPo Diameter: 35.8 mm Length: 51.8 mm Shaft Diameter: 3.15 mm Weight: 175 g 📦 Includes: (1) Reedy Sonic 540-FT 13.5T Fixed Timing Brushless Motor 💡 Pro Tip:Pair the Sonic 540-FT with a Reedy Blackbox 600Z ESC and Reedy LiPo 2S Shorty Pack for a smooth, balanced, and race-ready setup right out of the box.  

Read more less

Take control of the toughest trails with the JConcepts Bossman 1.9" Rock Crawler Tires, built for extreme traction, durability, and class-leading performance. Designed for serious 1/10 scale crawlers, the Bossman’s asymmetrical tread pattern delivers unmatched grip and adaptability — giving each side of your rig its own optimized traction profile for conquering diverse terrain. Crafted from JConcepts’ Green Super Soft compound, these tires flex, conform, and bite into rock, dirt, and uneven surfaces with precision. Whether you’re scaling slick rock faces or navigating jagged terrain, the Bossman tires deliver competition-ready performance with a clean, uniform carcass design and detailed sidewall lugging. ⚙️ Features: Asymmetrical tread pattern for left/right traction optimization Class 1 competition legal (4.19" OD) for realistic and performance-oriented builds Micro-bladed tread plots increase flexibility and terrain conformity Aggressive sidewall lugging enhances pinch grip and climbing stability Continuous thickness carcass for predictable handling and shape retention Fits all 1.9” crawler wheels for easy compatibility Recessed JConcepts logo and molded part number for authenticity Includes open-cell foam inserts for balanced internal support Engineered for maximum performance in Green compound for ultimate traction 📏 Specifications: Part Number: 4137-02 Scale: 1/10 Competition Class: Class 1 Outer Diameter: 4.19" (120.65mm) Inner / Outer Diameter: 1.9" Compound: Green (Super Soft) Quantity: 2 Tires + 2 Foams 📦 Includes: (2) JConcepts Bossman 1.9" Rock Crawler Tires (2) Open-Cell Foam Inserts 💡 Pro Tip:Pair the Bossman Tires with JConcepts Landmines or Tusk tires for versatile setups — perfect for adapting to varying course conditions from slick stone to loose terrain.

Read more less

Compatible with: XR10 PRO G2S Stealth / Max10 80A Keep your ESC cool under race heat with the Hobbywing G25 Stealth 2510BH-6V Frameless Cyclone Cooling Fan. Designed specifically for the XR10 PRO G2S Stealth and Max10 80A ESCs, this precision fan delivers high-RPM airflow with a frameless, low-drag design that maximizes efficiency and reduces noise. The G25’s compact profile fits tight racing setups while maintaining optimal heat management to protect critical electronics lap after lap. ⚡ Features: ✅ OEM replacement for Hobbywing XR10 PRO G2S Stealth and Max10 80A ESCs 🌪️ Frameless Cyclone Design provides superior airflow with minimal resistance 🔋 6 V operation for smooth, reliable cooling performance ⚙️ High-RPM brushless motor keeps ESC temperatures stable under load 💪 Compact 25×25×10 mm size for tight installations and low weight 🧠 Smart voltage guidance ensures proper pairing with your power system 📊 Specifications: Model: G25 Stealth 2510BH-6V Input Voltage: 6 V Size: 25 × 25 × 10 mm Design: Frameless Cyclone Recommended ESCs: Hobbywing XR10 PRO G2S Stealth, Max10 80A Weight: ≈ 10 g ⚙️ Voltage Selection Notes: 4–6 cell NiMH / 2S LiPo: Use included 5 V fan 7–9 cell NiMH / 3S LiPo: Use 12 V fan or power 5 V fan from receiver (+6 V) 10–12 cell NiMH / 4S LiPo: Use 12 V fan and external UBEC to power receiver 📦 Includes: (1) Hobbywing G25 Stealth 2510BH-6V Frameless Cyclone Cooling Fan 💡 Pro Tip:For the longest fan life, keep debris out of the blades and avoid running the fan when submerged or coated in tire compound dust — a quick blast of compressed air between runs keeps performance consistent.  

Read more less

🔑 Carry Your RC Passion Everywhere Show off your love for the INJORA brand with this premium Carbon Fiber Lanyard Keychain — a sleek, lightweight accessory that’s perfect for keys, tools, or even your transmitter bag. Built with real carbon fiber and durable paracord, it’s the perfect balance of strength, style, and function. ⚡ Features: 🏁 Carbon fiber logo tag with the official INJORA branding 🔩 Strong metal key clip — secure your keys or RC tools 🧵 Durable nylon paracord loop for long-lasting use 💨 Lightweight and easy to carry anywhere 💯 Perfect everyday accessory for RC enthusiasts 📏 Specifications: Part Number: INA-128 Material: Carbon Fiber Tag + Metal Clip + Nylon Cord Length: 185mm Weight: 12.2g Quantity: 1 Piece 📦 Includes: (1) INJORA Carbon Fiber Keychain Lanyard 💡 Pro Tip:Attach it to your transmitter case, pit bag, or tool set — it’s a stylish way to keep your essentials organized and show off your RC pride.  

Read more less

🧰 High-Strength Hardware for Serious Builders Upgrade your TRX4M’s reliability with the INJORA Grade 12.9 Stainless Steel Hardware Kit. Built for durability and precision, this kit includes a full selection of button-head screws and nuts to replace or upgrade the stock fasteners on your 1/18 TRX4M. With corrosion-resistant stainless steel construction and organized storage, this is a must-have kit for any serious RC crawler enthusiast. ⚡ Features: 🔩 Made from Grade 12.9 stainless steel — extreme strength and corrosion resistance 🧱 Direct fit for TRX4M — replaces stock hardware (except diff cover screws) 🧰 Includes multiple sizes and lengths to fit any build need 💪 Prevents rust, bending, and stripped heads for long-term performance 📦 Comes in a labeled storage box for easy organization and access 📏 Specifications: Part Number: 4M-15 Material: Grade 12.9 Stainless Steel Finish: Silver Polished Compatibility: 1/18 TRX4M (Defender, Bronco, K10, F-150) Note: Does not include screws used in the stock diff covers 📦 Includes: 10 × M1.6 × 7 mm Screws 12 × M1.6 × 12 mm Screws 10 × M2 × 4 mm Screws 45 × M2 × 6 mm Screws 10 × M2 × 8 mm Screws 10 × M2 × 12 mm Screws 8 × M2.5 × 8 mm Screws 10 × M2.5 × 10 mm Screws 10 × M2.5 × 12 mm Screws 20 × M2.5 × 14 mm Screws 15 × M2.5 × 18 mm Screws 5 × M2.5 × 21 mm Screws 3 × M3 × 6 mm Flat-Head Screws 28 × M3 × 6 mm Pins (Various Types) 10 × M2.5 Nuts (1) Reusable Plastic Storage Case 💡 Pro Tip:Keep one of these kits in your pit box — it’s the fastest way to replace missing hardware and keep your TRX4M tight and trail-ready after every run.    

Read more less

Lower Stance. Stronger Support. Race-Ready Durability. The Arrma Low Profile Wing Mount Set is a precision-engineered replacement designed to deliver maximum strength, stability, and aerodynamic performance for your Talion 6S BLX or Typhon 6S BLX. Crafted from impact-resistant composite material, this mount keeps your wing firmly in place during high-speed runs and extreme landings. Built for Strength & Precision Manufactured from high-quality composite, this low-profile mount enhances your RC’s durability while maintaining a sleek, aggressive look. Precision-cut mounting holes ensure secure installation and reduce stress points under impact — keeping your rear wing positioned perfectly, lap after lap. Features: Strong composite construction for long-lasting durability Low-profile design for improved aerodynamics and stability Precision screw holes for tight, reliable fitment Crash-resistant design for hard landings and extreme bashing Direct factory replacement for easy installation Includes: (1) Low Profile Rear Wing Mount Set Compatibility: Arrma Talion 6S BLX Arrma Typhon 6S BLX Arrma — Designed Fast. Designed Tough.

Read more less

Mini Size. Maximum Performance. Pro-Line Quality. Take your small-scale crawler to the next level with the Pro-Line Big Bore Scaler Shocks, designed specifically for the Axial SCX24 and AX24 platforms. Inspired by Pro-Line’s full-size 1/10 Big Bore shocks, these precision-engineered dampers deliver smoother suspension action, superior damping, and unmatched durability — all in a compact 50mm design CNC Machined Precision Each shock features CNC-machined aluminum caps, threaded bodies, and bottom caps, paired with polished steel shafts for ultra-smooth operation and long-lasting strength. The double O-ring seal ensures leak-free performance, keeping your rig planted and predictable over every obstacle. Pre-Assembled & Ready for Action These shocks come pre-built and ready to fill — just add your preferred 20wt silicone shock oil and hit the trails. The kit also includes optional stiff springs and all necessary hardware for both SCX24 and AX24 installations, giving you complete tuning flexibility in one upgrade. Features: Ultimate performance shocks for the Axial AX24 & SCX24 CNC-machined aluminum caps, bodies, and bases True Big Bore design holds more oil for smoother damping Double O-ring seals eliminate leaks and friction Pre-assembled — just add oil (20wt recommended) Includes optional stiff springs & mounting hardware Pro-Line performance and durability in 1/24 scale Specifications: Spec Detail Scale 1/24 Extended Length 50mm (eye-to-eye) Collapsed Length 35.25mm (eye-to-eye) Stroke 14.75mm Spring Length 36mm Includes: (4) Big Bore Scaler Shocks (4) AX24 Upper Shock Balls (4) SCX24 Upper Shock Balls (8) SCX24 Upper Shock Ball O-Rings (4) Stiff Springs (4) 1.4x14mm Upper SCX24 Screws (4) 1.4x10mm Lower Screws Note: Shock oil not included. Compatibility: Axial SCX24 Axial AX24 Pro-Line Racing — Performance, Precision, and Style in Every Scale.  

Read more less

Precision Fit. Race-Proven Performance. Upgrade your TC8 with the 1UP Racing Aluminum DirectHex Hub Axles, engineered for racers who demand accuracy, strength, and tuning flexibility. Designed with a true hex interface, these axles eliminate slop and inconsistencies found in traditional clamping-style hubs, ensuring smooth, precise wheel alignment and consistent performance lap after lap. Precision Tuning Made Easy Machined from lightweight 7075 aluminum, these DirectHex axles combine strength and style with a sleek black anodized finish and laser-etched 1UP Racing logos. Each set includes premium 6x10x3 Cv2 Pro bearings and four o-rings for secure installation and long-lasting durability. With 6mm offset, they provide the perfect balance of handling and stability for competitive TC8 setups. Features: True hex interface eliminates wheel slop and clamping issues CNC-machined from 7075 aluminum for strength and weight savings Black anodized finish with laser-etched size and branding Includes 6x10x3 Cv2 Pro bearings for smooth performance Four o-rings included for precise and secure installation Race-proven design for the Team Associated TC8 platform Available in 4mm, 5mm, and 6mm options to fine-tune handling Includes: (2) TC8 Aluminum DirectHex Hub Axles (6mm Offset) (2) 6x10x3 Cv2 Pro Bearings (4) O-Rings Compatibility: Team Associated TC8 1UP Racing — Engineered for Precision. Tuned for Champions.

Read more less

Dress It Up. Toughen It Up. Give your TRX-4M or TRX-4MT a clean, polished look with the Traxxas Stainless Steel Hardware Kit. This premium upgrade replaces your factory hardware with high-quality stainless steel screws and fasteners, offering enhanced corrosion resistance, durability, and style. Performance Meets Style Engineered to the same precise standards as the original Traxxas components, this kit is perfect for drivers who want both performance and presentation. The stainless finish not only adds a sleek look but also protects against rust and wear — ideal for all-weather crawling and long-term reliability. Features: Complete stainless steel hardware upgrade kit Corrosion-resistant finish for lasting durability Adds a custom polished look to your TRX-4M or TRX-4MT Direct replacement for the factory hardware kit Includes all necessary screws and fasteners Genuine Traxxas factory-quality components Includes: (1) Complete Stainless Steel Hardware Kit Compatibility: Traxxas TRX-4M Traxxas TRX-4MT Traxxas Tough — Stainless Style That Lasts.

Read more less

Protect Your Steering. Preserve Your Servo. Keep your steering system precise and protected with the Traxxas Servo Saver Set, designed for the Mini XRT® and 4-Tec® platforms. This genuine Traxxas replacement part absorbs impact and steering stress, preventing damage to your servo during crashes and high-impact bashing. Reliable Steering Protection Engineered for durability and smooth operation, the servo saver ensures consistent steering response while safeguarding critical steering components. Whether you’re racing or bashing, it’s a simple yet essential upgrade to maintain performance and reliability. Features: Absorbs impact to protect the steering servo from damage Maintains precise steering control and smooth response Durable composite construction built for long-lasting performance Genuine Traxxas factory fit and finish Direct replacement for Mini XRT® and 4-Tec® platforms Includes: (1) Servo Saver Set Compatibility: Traxxas Mini XRT® Traxxas 4-Tec® Traxxas Tough — Steering Protection That Lasts.

Read more less

Consistent Power. Brighter Performance. Keep your Traxxas LED accessories shining bright from start to finish with the Traxxas Regulated Accessory Power Supply (3V/3A). Engineered to deliver steady, flicker-free power, this compact unit ensures your lighting setup performs flawlessly run after run — no matter how rough the terrain. Reliable LED Power Featuring dual 3-volt output connectors, the power supply allows you to run multiple lighting accessories at once while maintaining consistent brightness. It’s the perfect match for Traxxas Mini Maxx® Front and Rear Bumpers with LED Lights (TRA10797 / TRA10798 – sold separately). With water-resistant construction and a wide input range, this unit provides dependable illumination in any environment. Features: Tightly regulated 3V output for stable LED performance Prevents flickering and dimming during acceleration or voltage drops Dual output connectors power multiple LED accessories Water-resistant design for extreme off-road conditions Compact, durable construction for easy installation and reliability Includes Power Tap connector and installation hardware Input range: 5.0–16.8V Includes: (1) Regulated Accessory Power Supply (3V/3A) (1) Power Tap Connector Installation Hardware Specifications: Spec Value Input Voltage 5.0–16.8V Output Voltage 3V Current 3A Power Output 8.4 Watts Traxxas Tough — Power Your LEDs the Right Way.  

Read more less

Smooth, Consistent Power Delivery. Keep your Mini Maxx® running at peak performance with the Traxxas 32P Center Differential Composite Spur Gear (47T) — a precision-engineered replacement designed specifically for models equipped with the optional center differential (TRA10760). Crafted from durable composite material, this spur gear ensures smooth, efficient power transfer and reliable operation during intense RC action. Engineered for Performance Built to Traxxas’ exacting standards, this 47T composite spur gear maintains proper gear mesh, reduces drivetrain noise, and provides consistent traction across all surfaces. Ideal for high-speed setups or heavy bashing, it delivers the balance of durability and precision your Mini Maxx deserves. Features: High-strength composite construction for long-lasting durability 47T, 32-pitch gearing for smooth, efficient performance Direct replacement for center differential–equipped models Maintains perfect gear mesh and drivetrain balance Genuine Traxxas factory fit and quality Includes: (1) 32P Composite Spur Gear (47T) Note: Does not fit standard center driveshaft setups Requires optional Center Differential (TRA10760) Compatibility: Traxxas Mini Maxx® (with optional center differential) Traxxas Tough — Smooth Power. Maximum Performance.

Read more less

Smooth Power. Secure Grip. Keep your Mini Maxx® running strong with the Traxxas 32P Slipper Clutch Composite Spur Gear (47T) — a genuine replacement designed for Mini Maxx® models equipped with the optional slipper clutch system (TRA10758). Engineered for precise fitment and reliable performance, this gear delivers smooth, consistent power transfer under heavy loads. Reliable Performance Upgrade Manufactured from high-quality composite material, this spur gear provides excellent durability while maintaining quiet, efficient drivetrain operation. It’s the perfect solution for drivers running a slipper clutch setup who need dependable performance and long-lasting wear. Features: High-strength composite construction for durability and smooth operation 32-pitch (47T) design for efficient power delivery Direct replacement for slipper clutch–equipped Mini Maxx® models Maintains precise gear mesh and consistent performance Genuine Traxxas factory fit and finish Includes: (1) 32P Composite Spur Gear (47T) Note: Does not fit standard center driveshaft setups Requires optional Slipper Clutch Assembly (TRA10758) Compatibility: Traxxas Mini Maxx® (with slipper clutch system Traxxas Tough — Smooth Power Meets Maximum Control.

Read more less

Smooth Power. Lightweight Strength. Upgrade your drivetrain with the Traxxas Composite Center Driveshaft, engineered for Mini Maxx® and XRT™ platforms equipped with the optional slipper clutch (TRA10760) or center differential (TRA10758). This precision-molded composite shaft delivers efficient, reliable power transfer while keeping overall weight low for improved acceleration and handling. Durable & Efficient Design Made from high-strength composite material, this center driveshaft provides long-lasting durability and smooth drivetrain performance. It’s designed for easy installation and precise fitment, making it the ideal upgrade or replacement when adding a slipper or center differential to your Mini Maxx or XRT. Features: High-strength composite construction for lightweight durability Optimized for slipper clutch or center diff setups (sold separately) Ensures smooth and efficient power transfer Direct-fit design for easy installation Genuine Traxxas factory precision Includes: (1) Composite Center Driveshaft Compatibility: Traxxas Mini Maxx® (with slipper clutch or center differential) Traxxas XRT™ (with slipper clutch or center differential) Traxxas Tough — Engineered for Smooth Power.  

Read more less

Built for Power. Made to Last. Upgrade your drivetrain with the Traxxas 32P Steel Spur Gear (47T) — the ultimate strength upgrade for your Mini Maxx® or Mini Slash®. Designed to handle the extreme torque and high-RPM abuse these trucks are known for, this precision-machined steel spur gear replaces the stock composite version for superior durability and smoother power transfer. Stronger Power Transfer When big power meets lightweight plastic, something has to give — and it won’t be this gear. Crafted from high-grade steel, this spur gear keeps your drivetrain tight and efficient under heavy acceleration, hard landings, and high-speed runs. The direct-fit design maintains the original gearing setup, ensuring seamless compatibility while delivering maximum reliability for demanding bashers and racers. Features: Made from premium steel for maximum durability Handles extreme torque and power loads Same tooth count (47T) as stock for direct fit Smooth, efficient power transfer under stress Drop-in replacement for the factory composite gear Perfect for high-performance Mini Maxx® and Mini Slash® builds Includes: (1) 32P Steel Spur Gear (47T) Compatibility: Traxxas Mini Maxx® Traxxas Mini Slash® Traxxas Tough — Steel Strength for Real Power.

Read more less

Dial In the Perfect Suspension Feel. Fine-tune your suspension with the Traxxas Tan 4.1 Rate GTR Shock Springs, designed for the Revo and E-Revo VXL 2.0 platforms. Crafted from premium spring steel and finished with a durable powder coating, these springs deliver precision performance and consistent rebound for every terrain. Performance Suspension Tuning Traxxas offers a wide range of GTR spring rates to perfectly match your truck’s setup — whether you’re running lighter or heavier configurations or experimenting with rocker arm positions. The Tan 4.1 rate springs offer a balanced blend of firmness and control, making them ideal for mixed-terrain bashing or racing. Each spring is color-coded with a dot indicator for easy rate identification during tuning. Features: Tan 4.1 spring rate for balanced control and responsiveness Premium spring steel construction for consistent performance Durable powder-coated finish for long life and corrosion resistance Color-coded ends for easy identification Designed for Traxxas GTR shocks Includes: (2) Tan 4.1 Rate GTR Shock Springs Compatibility: Traxxas E-Revo VXL 2.0 Traxxas Revo Nitro Traxxas Tough — Tune It. Send It. Own It.

Read more less

Precision Fit. Factory Strength. Keep your XRAY buggy performing flawlessly with the Composite 3G Gear Box Housing, designed specifically for the XB2C and XB2D 2025 platforms. Manufactured with XRAY’s world-class precision and composite technology, this gearbox housing delivers the perfect balance of strength, light weight, and durability for top-level competition. Race-Proven Design Engineered for optimal drivetrain alignment and smooth power delivery, this factory replacement housing ensures your XB2 transmission runs reliably and efficiently. Ideal for racers looking to maintain peak performance, it’s built to handle high torque and intense track conditions without flex or wear. Features: Genuine XRAY factory replacement part Durable composite construction for lightweight strength Ensures precise gear mesh and smooth drivetrain operation Designed for maximum performance and reliability Direct fit for XB2C & XB2D 2025 models Includes: (1) Composite 3G Gear Box Housing Compatibility: XRAY XB2C 2025 XRAY XB2D 2025 XRAY — The Art of Performance.

Read more less

Precision Performance. Lab-Calibrated Consistency. Keep your shocks performing at their peak with HUDY Ultimate Silicone Oil 400 cSt, the trusted choice of top racers worldwide. Manufactured in Europe by HUDY’s premium silicone specialists, this oil is laboratory tested and calibrated to deliver unmatched consistency, batch after batch. Whether you’re tuning for off-road stability or on-road precision, HUDY’s 400 cSt oil provides the perfect balance of damping and responsiveness for smooth, predictable handling. Race-Ready Quality HUDY oils use the industry-standard cSt rating for easy identification and setup changes. The 400 cSt blend sits in the light-to-medium viscosity range, making it ideal for shock applications where precise damping is key. Each oil type is color-coded for instant recognition and faster pit work. Features: Premium-grade silicone oil manufactured in Europe Lab-tested for precision and batch consistency 400 cSt viscosity — perfect for shock tuning cSt-rated for easy setup adjustments Color-coded labeling for quick identification Trusted by professional racers worldwide Specifications: Viscosity: 400 cSt Volume: 100 ml bottle Product Code: 106341 HUDY Ultimate Oils — Consistency You Can Feel.    

Read more less

The Arrma Mojave Grom Steering Knuckles & Rear Hubs Set (B) provides durable, factory-fit replacements to keep your suspension and steering performing like new. Designed for precision fit and smooth operation, these molded composite parts ensure reliable handling and impact resistance on your 1/18-scale Mojave Grom. ✅ Factory Replacement Components – direct OEM fit for the Mojave Grom platform✅ Includes Front & Rear Components – complete hub and knuckle replacement set✅ Durable Composite Construction – built to handle tough driving conditions Includes: (2) Steering Knuckles (2) Rear Hubs Compatibility: Arrma Mojave Grom Losi NASCAR Part #: ARA330841

Read more less

The Arrma Granite Grom Rear Suspension Arm Set “A” provides durable, factory-fit replacements to keep your 1/18-scale Grom running strong. Precision-molded from high-strength composite material, these upper and lower arms deliver reliable performance and consistent suspension geometry for smooth handling and crash resistance. ✅ Factory OEM Replacement – direct fit for the Grom platform✅ High-Strength Composite Construction – tough enough for heavy bashing✅ Includes Upper & Lower Arms – complete replacement set for one rear side Includes: (2) Rear Upper Suspension Arms (2) Rear Lower Suspension Arms Compatibility: Arrma Gorgon Grom Arrma Granite Grom Arrma Quake Grom Arrma Typhon Grom Part #: ARA330808    

Read more less

The Arrma Mojave Grom Rear Suspension Arm Set (B) includes precision-molded upper and lower arms designed to restore factory handling and durability to your 1/18-scale Mojave Grom. Built from high-strength composite material, these arms deliver the perfect balance of rigidity and flex for reliable performance on any surface. ✅ Factory Replacement Set – direct OEM fit for the Mojave Grom platform✅ High-Strength Composite Construction – built to withstand hard impacts✅ Includes Upper & Lower Arms – complete replacement for one rear side Includes: (2) Rear Upper Suspension Arms (2) Rear Lower Suspension Arms Compatibility: Arrma Mojave Grom 4×4 1/18-Scale Desert Truck Part #: ARA330840    

Read more less

The Arrma Granite Grom Bumper Set provides rugged protection for your 1/18-scale Granite Grom Monster Truck. Designed to absorb hard impacts and keep your chassis safe during high-energy bashing, this factory-fit replacement kit includes both front and rear bumpers with all required hardware. ✅ Durable Factory Parts – absorbs impacts and protects your chassis✅ Complete Front & Rear Set – everything needed for quick replacement✅ Direct OEM Fit – precision-molded by Arrma for the Granite Grom Includes: (1) Front Bumper (1) Rear Bumper (4) 2.5 × 8 mm Cap Head Screws (8) 2.5 × 8 mm Flat Head Screws Compatibility: Arrma Granite Grom Monster Truck Part #: ARA320745  

Read more less

Built Tough. Engineered to Last. Keep your 4x4 running strong with the Arrma Composite Long Wheelbase Chassis, designed for extreme durability and precision fitment across multiple 3S BLX and MEGA platforms. Whether you’re rebuilding, upgrading, or replacing a worn chassis, this genuine Arrma component ensures your vehicle stays rigid, reliable, and ready for action. Durability by Design Constructed from tough composite material, this chassis provides the perfect balance of lightweight strength and resilience. Reinforced stress zones improve impact resistance, while precisely molded mounting points guarantee a secure fit for all critical components. The integrated gearbox housings and suspension mounts add rigidity and reduce flex for consistent performance in even the most demanding conditions. Features: Tough composite construction for long-lasting durability Precision-manufactured mounting holes for perfect fit Reinforced stress areas for extra strength and rigidity Integrated lower gearbox housings and suspension mounts for solid handling Genuine Arrma 4x4 factory fitment Compatibility: Arrma Big Rock 3S BLX Arrma Infraction MEGA Arrma Infraction V3 3S BLX Arrma Kraton 4S BLX Arrma Senton 4x2 Boost Arrma Senton 4x4 550 Arrma Typhon 3S BLX Arrma Typhon 4x4 550 Arrma Vendetta 3S BLX Arrma Tough — Designed for Maximum Bashing Power.

Read more less

Upgrade Strength. Boost Performance. Take your Grom’s durability to the next level with the Arrma Metal Axle & Hex Set — the ultimate upgrade for smoother power delivery and tougher performance. Built from precision-machined metal, this kit replaces stock components for enhanced strength, longer life, and confident control no matter how hard you bash. Performance Upgrade Designed to withstand serious abuse, the Metal Axle & Hex Set keeps your drivetrain running true even under heavy loads. Expect tighter wheel engagement, improved handling, and reduced wear — everything you need to keep your Grom performing like new, run after run. Features: High-quality metal construction for superior strength and longevity Enhanced durability over stock plastic parts Improved drivetrain efficiency and smoother operation Direct bolt-on fit for multiple Grom models Includes: (2) Front Universal Joint Driveshafts (2) Rear Stub Axles (4) Clamping Wheel Hexes (4) Locking Grub Screws (4) Drive Pins (4) 4 mm Wheel Nuts Compatibility: Arrma Gorgon Grom Arrma Granite Grom Arrma Quake Grom Arrma Typhon Grom Arrma Tough — Metal where it matters.

Read more less

Overview:Upgrade your suspension performance with the Traxxas PTFE-Coated Aluminum Ball Studs. Designed specifically for the Jato®, these premium ball studs reduce friction and weight compared to stock steel components, allowing the suspension to move more freely for smoother, more responsive handling. Perfect for racers and enthusiasts looking to fine-tune performance and durability. Features Genuine Traxxas Factory Upgrade Lightweight aluminum construction PTFE (Teflon) coating minimizes friction Improves suspension smoothness and responsiveness Direct replacement for stock steel ball studs Includes (4) PTFE-Coated Aluminum Ball Studs Compatibility Traxxas Jato®

Read more less

Heavy-duty charge lead for Junsi iCharger 456DUO and other XT90-input chargers Overview:The ProTek RC 2S High Current Charge/Balance Adapter is built for racers who demand maximum efficiency and reliability when charging at high amperage. Designed specifically for Junsi iCharger 456DUO users—and ideal for any charger using XT90 inputs—this cable delivers ultra-low resistance and premium performance for modern high-power LiPo packs. About the High Current Charge/Balance Adapter Built for Serious Power HandlingThis adapter features gold-plated 5 mm bullets for secure, low-loss battery connection and a female XT90 connector for the charger side, ensuring stable current transfer even during extreme charge or discharge cycles. The 10 AWG high-strand wire provides the heavy-duty conductivity needed for charging at higher-than-average amp rates without voltage drop or excess heat. Clean, Tangle-Free DesignThe 24-inch coiled jacket keeps your pit area organized and the cable flexible, while reducing tangling during setup or transport. A 7-pin XH balance connector provides easy balancing for 2S and higher cell count packs—making this a truly versatile, professional-grade charging lead. Features: Designed for Junsi iCharger 456DUO and other XT90-input chargers 5 mm gold-plated bullets for secure battery connection 10 AWG high-strand wire handles extreme current demands Female XT90 connector ensures solid charger connection 7-pin XH balance plug supports up to 6S balancing 24" (61 cm) coiled jacket for flexibility and a tangle-free workspace Low resistance design for maximum charge performance Specifications: Specification Details Wire Gauge 10 AWG Length 24" (61 cm) Charger Connector Female XT90 Battery Connector 5 mm Gold-Plated Bullets Balance Connector 7-Pin XH (Up to 6S) Compatibility Junsi iCharger 456DUO / 458DUO, XT90-input chargers Includes: (1) 2S High Current Charge/Balance Adapter Cable

Read more less

Compatible with iCharger 456DUO, 458DUO, and iSDT Chargers Overview:The TQ Wire XT90 2S Charge Cable is built to handle high-power charging applications with maximum efficiency and reliability. Designed specifically for use with Junsi iCharger 456DUO and 458DUO, this premium cable provides a secure connection between your charger and LiPo batteries equipped with 4mm or 5mm bullet connectors. About the XT90 2S Charge Cable Heavy-Duty Design for High Power ChargingFeaturing an XT90 connector for the charger side and stepped 4mm/5mm bullets for the battery side, this cable is ideal for high-current setups where performance and safety are critical. The stepped bullet design ensures wide compatibility with various LiPo battery packs while maintaining a tight, low-resistance connection. Built from 12-gauge high-strand wire, the cable provides excellent current flow and flexibility. The length of 2 feet (610mm) offers convenience for bench setups without cluttering your workspace. Wrapped in durable black nylon mesh, it’s both tough and clean-looking—ready for the pits or workshop. Features: XT90 connector for secure charger connection 4mm & 5mm stepped bullets for wide battery compatibility Designed for Junsi iCharger 456DUO and 458DUO 12 AWG high-strand wire for maximum current efficiency 2-foot length for optimal reach and organization Durable black nylon mesh wrap for protection and aesthetics Plug-and-play reliability for professional or hobby use Specifications: Specification Details Length 2 feet (610mm) Wire Gauge 12 AWG Charger Connector XT90 Battery Connectors 4mm & 5mm Stepped Bullets Compatibility iCharger 456DUO, 458DUO, iSDT, and XT90-equipped chargers Includes: (1) XT90 2S Charge Cable with 4mm & 5mm Bullet Connectors

Read more less

Overview:Upgrade your Team Associated B6.4 or B6.4D with the 1UP Racing Pro Duty Titanium Upper Screw Set, engineered for racers who demand the perfect blend of strength, precision, and style. Crafted from aerospace-grade titanium, these screws reduce weight while boosting durability and adding a premium look to your build. About the Pro Duty Titanium Upper Screw SetThe 1UP Racing Pro Duty Titanium Upper Screw Set replaces all stock M3 button and flat-head screws with 1UP’s precision LowPro and Flat Head titanium hardware. Each set also includes Lockdown Screws wherever possible, eliminating the need for separate upgrades. Machined from 6AL-4V (Grade 5) titanium, every screw is CNC-cut for optimal strength, consistency, and a flawless finish — giving you reliability that lasts race after race. Features: Aerospace-grade 6AL-4V (Grade 5) titanium construction Replaces all kit M3 button and flat-head screws Includes 1UP Lockdown Screws where applicable CNC-lathe machined for superior strength and precision fit Reduces overall vehicle weight while improving durability Race-proven design for high-stress RC conditions Sleek, professional finish for premium appearance Installation Tip:For best results, 1UP Racing recommends using Genuine MIP 2.0 mm Hex Driver Wrenches for optimal hex engagement and longevity. Compatibility: Team Associated RC10 B6.4 Team Associated RC10 B6.4D Includes: (1) Complete Titanium Upper Screw Set (for RC10 B6.4/B6.4D)  

Read more less

High-temp. High-flex. High-quality.The PN Racing 20AWG i-MAC Silicone Wire delivers exceptional performance for high-demand RC builds. Rated for 200°C and 600V, this premium silicone wire is ultra-flexible, easy to solder, and built to handle extreme heat without losing conductivity or strength. Perfect for Mini-Z, ESC wiring, battery leads, or any custom electronics work where precision and reliability matter. Available in i-MAC Red or i-MAC Blue, each roll includes 5 feet of wire — ideal for compact RC setups that demand professional-grade quality. ⚙️ Features High-temperature 200°C-rated silicone insulation Handles up to 600V for high-power applications 20AWG gauge – strong, flexible, and easy to route Ultra-soft silicone jacket resists cracking and abrasion Perfect for Mini-Z, ESC, and battery lead wiring Available in i-MAC Red or i-MAC Blue Each pack includes 5 feet of wire 📏 Specifications Spec Detail Gauge 20 AWG Length 5 ft (per color) Temperature Rating 200°C Voltage Rating 600V Colors Available i-MAC Red / i-MAC Blue Material Pure Copper Wire w/ High-Flex Silicone Insulation Manufacturer PN Racing

Read more less

Durable. Precise. Ready for the strip.The Team Associated DR10M Suspension Arm Set is a direct replacement designed specifically for your DR10M drag car. Crafted from high-strength composite material, these arms deliver the ideal blend of rigidity and flex for consistent traction, smooth launches, and precise straight-line stability. Whether you're repairing crash damage or refreshing your suspension setup, this factory-original set ensures your DR10M stays race-ready and performing at its best. ⚙️ Features Genuine Team Associated factory replacement parts Durable composite construction for strength and consistency Precision molded for perfect fit and alignment Keeps your DR10M handling smooth and stable on every pass 📦 Includes (1) Complete DR10M Suspension Arm Set ✅ Compatibility Team Associated DR10M    

Read more less