Team Associated B6 Bumper Set (91685)Keep your RC10 B6 or B6D protected with this genuine Team Associated replacement bumper set. Whether you're replacing worn parts or upgrading your buggy's durability, this set has you covered with both front and rear bumpers included. Includes: (1) Front Bumper (1) Rear Bumper Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Hobbywing XR10 Pro Legacy Edition – Proven Performance, New Price! 💡 Relaunched with updated pricing! The original ESC that powered world champions is back as the XR10 Pro Legacy Edition — delivering uncompromised performance in a more affordable package. Whether you're a competitive racer or high-end hobbyist, the XR10 Pro Legacy has what it takes to push your 1/10 vehicle to the next level. Compact, powerful, and packed with race-winning features, this ESC is the real deal for touring car, buggy, drift, F1, and even rock crawler applications. ✨ Key Features: ⚡ 160A Continuous / 1200A Peak Current – Handles extreme power demands📊 10 Programmable Profiles – Easily dial in throttle/brake curves and turbo/boost settings🎛️ Precision Tuning – Adjust drive frequency, brake frequency, coast, turbo, and boost🛠️ Advanced Safety – ESC & motor thermal protection, LiPo low-voltage cutoff🔁 Remote ON/OFF – Easily power cycle without reaching into tight installs🌡️ Dual Cooling Fans Included – With backup fan for peace of mind📡 OTA Firmware Updates – Via optional WiFi Express Module📦 Loaded with Bonus Gear – Dual capacitors, heat shrink, tape, zip ties & decals🏆 ROAR Approved – Legal and trusted in high-level competition 📦 What’s In the Box? ✔️ (1) Hobbywing XR10 Pro Legacy ESC w/ Cooling Fan✔️ (2) Input Wires (12AWG, 200mm)✔️ (3) Output Wires (12AWG, 200mm)✔️ (1) Backup Cooling Fan✔️ (1) Dual Capacitor Module✔️ Bonus Items: Heat Shrink Tubes, Double-Sided Tape, Nylon Zip Ties, Decals✔️ (1) User Manual 📊 Specifications: Type: 1/10 Sensored Brushless ESC Continuous/Peak Current: 160A / 1200A Input Voltage: 2–3S LiPo / 4–9 Cell NiMH BEC Output: 6V/7.4V Switchable @ 4A Dimensions: 37.5 x 30.9 x 31.6mm (w/ fan) Weight: 95g (with wires) Cooling Fan: 25x25x10mm powered by stable 6–7.2V BEC 🔧 Compatible With: Motor Type: Sensored brushless (e.g., Hobbywing V10 G3 or G4 series) Vehicle Types: 1/10 Touring Car, Buggy, Drift Car, F1, Rock Crawler Motor Limits (2S LiPo): Touring ≥3.5T, Buggy ≥4.5T Motor Limits (3S LiPo): Touring ≥6.5T, Buggy ≥8.5T 🧠 Programming Options: LCD Program Box or WiFi Express Module (sold separately) Full access to throttle, brake, boost, turbo, timing, voltage cutoff, frequency tuning, and more! 🚀 Legendary Racing Tech — Now More Accessible The XR10 Pro Legacy is the same championship-grade ESC that set the standard for precision and reliability. With updated value pricing and the same core performance, it’s never been easier to upgrade to Hobbywing’s elite-level ESC platform. 💨 Get legendary power, proven control, and unmatched tuning in one sleek ESC — without breaking the bank. 🏁

Read more less

Arrma Safe-D5 Mod1 Pinion Gears feature a "D" shaped hole that allows the motor shaft to key inside the pinion gear, eliminating the loss of drive and brakes if the set screws comes loose. This tough steel Pinion Gear is available in multiple tooth count options, allowing you to fine tune the gear ratio. Features: Strong and durable steel for long-lasting performance in extreme RC conditions Precision manufactured wide tooth profile for smooth operation 'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out Suits 5mm motor shaft diameter Precision manufactured threaded set-screw hole E-clip supplied for motor shaft pinion retention Includes: (1) Mod1 Safe-D Pinion Gear (1) Set Screw - M4 x 4mm (1) E-Clip - 3.2mm COMPATIBILITY: Arrma Felony 6S BLX Arrma Infraction V2 6S BLX Arrma Kraton 8S BLX Arrma Outcast 8S BLX

Read more less

  Enhance steering strength and accuracy with the LC Racing Aluminum Steering Block. CNC-machined from high-quality aluminum, this upgrade offers improved durability, tighter tolerances, and a premium feel compared to stock composite parts. Features: CNC-machined aluminum for superior strength and wear resistance Maintains precise steering geometry for consistent handling Anodized finish for corrosion protection and a pro look Direct replacement for stock steering blocks on compatible LC Racing models Includes: (1) Aluminum Steering Block An ideal upgrade for drivers looking for precision, durability, and smoother steering performance.

Read more less

🏁 Direct replacement wing stay for the Losi Mini-B—designed to securely mount your wing and provide solid support from both the front and rear shock towers. 💡 Features: Precision fit for the Mini-B Durable plastic construction Replaces front or rear shock tower wing stay 🔧 Includes:(1) Front/Rear Wing Stay ✅ Compatibility:Losi Mini-B

Read more less

Bring the heat to the track with the JConcepts Hazard wheels! Designed for SC10 4x4 and SC10 2WD trucks (with 12mm hex conversion), these wheels widen your stance by 6mm for maximum stability and cornering performance. Perfect for high-speed dirt oval or off-road racing, the Hazard wheels are lightweight, durable, and race-legal to the max ROAR width. Features:• Adds 3mm offset per side for a total of 6mm extra width• Designed for SC10 4x4 and SC10 2WD w/ 12mm hex conversion• Durable 1-piece design with interior/exterior ribbing• Matte-finish face in Black (3344B), White (3344W), or Yellow (3344Y)• Inspired by full-scale racing wheels• Lightweight and hassle-free for race day

Read more less

This is a replacement G3 Shock End Set for Team Losi Racing vehicles equipped with G3 shocks. Designed for durability and smooth suspension operation, this set includes four high-quality shock ends compatible with a variety of TLR models. ✅ Includes:• (4) G3 Shock Ends Perfect for routine maintenance or as a direct replacement to keep your suspension performing at its best.

Read more less

Factory Team Silicone Shock Fluid – 2oz (10wt–80wt)Dial in your suspension like a pro with Factory Team Silicone Shock Fluid! 🛠️ Made from 100% pure silicone, this oil maintains consistent performance in any temperature — no thinning in the heat, no thickening in the cold. Whether you're tuning for smooth landings or sharp handling, there's a perfect weight from 10wt to 80wt to match your setup. ✅ Great for: Oil-filled shocks on 1/10 & 1/8 scale vehicles Consistent performance across all temps Precision tuning from ultra-light to ultra-thick damping 🧪 Choose your weight using the dropdown menu.📦 2oz bottle – available in 10wt, 15wt, 20wt... up to 80wt Note: Team Associated shock oil runs slightly thinner than comparable Team Losi oils with the same labeled weight.  

Read more less

Traxxas Slash Pro-Built Complete DifferentialPart #: 2380 Get back on the track fast with this Pro-Built Complete Differential from Traxxas! Designed for the 2WD Slash, Rustler, Bandit, and Stampede, this drop-in replacement comes fully assembled and ready to install—no fuss, no hassle. Whether you're repairing after a race or building up a new basher, this factory-built differential delivers consistent performance with Traxxas quality you can trust. Fits: 2WD Slash Rustler Bandit Stampede Includes: (1) Fully Assembled Complete Differential Spend less time wrenching and more time ripping.  

Read more less

Overview:Keep your 1/10 buggy clean, protected, and easy to carry with the ProTek RC 1/10 Buggy Carrier Bag — a practical, travel-friendly storage solution designed by racers, for racers. About the Buggy Carrier Bag Clean. Convenient. Compact.Whether you’re heading to the track or packing for a flight, the ProTek RC 1/10 Buggy Carrying Bag makes transport effortless. Designed to hold one complete 1/10 buggy with the body and tires attached, this durable bag keeps dirt and grime contained while protecting your car during travel. It’s compact enough to stack on top of your hauler bag, store neatly in your vehicle, or roll up when not in use. Durable Three-Ply ConstructionBuilt from a premium three-ply material, the bag combines an easy-to-clean outer and inner layer with a thin foam-padded core for extra protection. Two heavy-duty zippers secure the lid while leaving space for your buggy’s rear wing to remain exposed for easy handling. Grab the integrated side handle, the wing, or attach your own shoulder strap (not included) for versatile carrying options. Features: Fits 1/10 buggies with body and tires installed Keeps dirt, dust, and debris contained Foam-padded for added protection during transport Carry-on sized — ideal for flights and compact storage Rolls up for easy packing when not in use Durable three-ply construction for long life Convenient side handle and optional shoulder strap compatibility Specifications: Fits: 1/10 buggy w/body and tires Dimensions (W x L x H): 11.02 x 16.14 x 4.35 in (28 x 41 x 11 cm) Wing Compatibility: Yes (exposed) Shoulder Strap: Compatible (not included)

Read more less

💥 Heavy-Duty Upgrade for BLX 4X4 ModelsBoost durability and performance with this HD 13T input gear—perfect for replacing worn-out stock parts on your 1/10 Arrma 4X4! 🔧 Features: 13T bevel gear with 1.35M tooth profile Tough composite gear molded onto a metal splined shaft Precision-built for smooth operation and long-lasting durability Direct replacement for easy install 🔩 Includes:(1) HD Input Gear - 13 Tooth Use with Diff Sets #ARA310872 or #ARA310956  

Read more less

Traxxas Antenna Tube Kit (Blue) – Part #1726📡 Stay Tuned. Stay Connected. The Traxxas Antenna Tube Kit is a direct replacement for many Traxxas vehicles, including the legendary Revo. Designed to protect and organize your receiver antenna, this kit helps maintain strong, consistent radio signal during high-speed runs and rough terrain. Whether you're rebuilding or just refreshing your rig, this simple upgrade keeps things clean and dialed in. ✅ Compatible with Traxxas Revo and more✅ Helps prevent antenna wire damage and tangles✅ Blue tube with black end cap and secure tubing sleeve✅ Easy to install, race-ready durability 📦 Includes: (1) Blue Antenna Tube (1) Black Antenna Cap (1) Black Tubing Sleeve for wire management

Read more less

Team Associated 6mm Heavy Duty Ballstud Set (8) – Part 91047Stronger Threads. Smoother Movement. Built for Racing. The Team Associated 6mm Heavy Duty Ballstud Set (91047) is a direct replacement for worn or damaged ballstuds on vehicles like the SC10 4x4, B5, and B5M. Designed for high-strength performance under stress, these ballstuds offer secure fitment and smooth suspension articulation. ✅ Set of 8 heavy-duty 6mm ballstuds✅ OEM fit for SC10 4x4, B5, B5M, and other compatible platforms✅ Heavy-duty steel construction – improved durability in high-load areas✅ Precision fit for smooth ball cup movement✅ Ideal for camber links, steering systems, and shock mounts 📦 Includes: (8) 6mm Heavy Duty Ballstuds Part #: 91047 💡 Pro Tip: Pair with fresh ball cups for smooth, slop-free suspension movement and tighter handling.

Read more less

Oil, shock (80 wt, 1,000 cSt, 60cc) (silicone)

Read more less

Oil, shock (20 wt, 200 cSt, 60cc) (silicone)

Read more less

Team Associated RC10B6 Pre-Cut 7" Wide Buggy Wing – ASC91998 Increased Downforce & Stability for 1/10 Buggies Upgrade your RC10B6 with this pre-cut 7" wide buggy wing and experience enhanced high-speed cornering and rear stability. Designed to deliver more downforce than the standard 6.5" wing, this wider version excels on low grip tracks and sweeping turns. ⚙️ Features: ✅ 7" Width – More surface area for increased rear downforce ✅ Pre-Cut Design – Ready to mount, no trimming needed ✅ Improved Stability – Optimized for high-speed turns and loose surfaces ✅ Durable Lexan Material – Lightweight and race-proven 📦 Includes: (1) Clear Pre-Cut 7" Wing ✅ Compatibility: Team Associated RC10B6 May fit other 1/10 buggies requiring a 7" wing (modification may be needed) 🛠 A great tuning aid for racers looking to boost corner speed and traction on loose or high-speed layouts.

Read more less

Upgrade your shocks with Team Associated's high-quality black aluminum 13mm shock caps. Designed for strength, consistency, and race-ready reliability, these caps provide enhanced durability over the stock plastic units while offering a sleek, factory look. ✅ Key Features Precision-machined aluminum construction for increased durability Anodized black for a factory team finish Lightweight design helps reduce unsprung mass Direct fit for Team Associated vehicles using 13mm shocks 🔧 Compatibility Fits the following Team Associated vehicles equipped with 13mm shocks: RC10B6.4 / RC10B6.4D RC10B6.3 / RC10B6.3D RC10B74.2 / RC10B74.2D RC10T6.4 RC10SC6.4(And any other models that use the 13mm V2 shock platform) 📦 Includes • • (2) Aluminum 13mm Shock Caps(Note: Shock bladders and O-rings sold separately)

Read more less

Traxxas Front Hex Wheel Hub (2) – Part #3654🔧 Keep Your Front End Dialed In. The Traxxas 3654 Front Hex Wheel Hubs are direct replacements for your worn or damaged originals. Designed for a precise factory fit, these hubs ensure your front wheels stay securely mounted and spinning true. Includes the necessary axle pins for a quick, hassle-free install. ✅ Includes two front hex hubs and two axle pins✅ Factory fit for Traxxas 2WD models✅ Keeps wheels aligned and properly secured✅ Easy to install – get back on track in minutes 📦 Includes: (2) Front Hex Wheel Hubs (2) Axle Pins 💡 Pro Tip: Always inspect your hubs and pins for wear—keeping them fresh ensures consistent handling and durability on race day.  

Read more less

Team Associated Factory Team Carbon Front Gullwing Arms – RC10B74.2 Increased Response for High-Traction Tracks Upgrade your RC10B74.2 or B74.2D with these Factory Team Carbon Front Gullwing Suspension Arms, designed for racers who demand sharper handling on high-grip or smooth surfaces. The carbon material increases stiffness, delivering enhanced steering response and cornering precision. 🔩 Features: 🏁 Carbon construction for added rigidity 🎯 Designed for smoother surfaces and high-traction conditions 🔧 Direct replacement for stock gullwing arms 🧩 Includes suspension arm spacers for proper fit 📦 Includes: (1) Left Front Carbon Gullwing Arm (1) Right Front Carbon Gullwing Arm (2) Suspension Arm Spacers ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 🏆 Dial in your front-end for faster response and refined control where it matters most.

Read more less

Team Associated RC10B7 Factory Team Carbon Rear Suspension Arms (2) – Lightweight Tuning for High-Bite Tracks! 💨 Take your RC10B7 handling to the next level with Factory Team Carbon Rear Suspension Arms. Built from AE’s proven lightweight carbon composite, these arms reduce unsprung weight and eliminate flex — giving you the precision and durability needed for high-grip conditions and competitive edge. 🔧 Key Features: ✅ Factory Team carbon composite material – ultra-light and super strong✅ Tuned stiffness for reduced flex and consistent rear traction✅ Ideal for high-bite tracks and competitive setups✅ Includes rear arm spacers for quick tuning adjustments✅ Race-proven performance, direct fit upgrade 📦 Includes: (2) Carbon Rear Suspension Arms (Arm Spacers) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🏁 Race harder, turn sharper, and accelerate faster with precision carbon upgrades.Factory Team quality you can feel. 🔧🔥

Read more less

The E-flite 3" Y-Harness is an ultra-lightweight solution designed for small indoor models, slow flyers, and 3D foamies. With a lighter gauge wire than typical extension leads, this Y-harness ensures minimal weight addition while maintaining reliable connectivity. 🔹 Key Features: ✅ Ultra-Lightweight Design – Ideal for lightweight aircraft where every gram counts.✅ Perfect for Indoor & Slow Flyers – Optimized for micro and small-scale RC planes.✅ Multiple Length Options – Available in 3" and 6" extensions.✅ Wide Compatibility – Works with all common receiver and servo brands.

Read more less

(For EMB-WRC, EMB-RA, EMB-1, EMB-SC, EMB-TC, EMB-TG, EMB-MT)

Read more less

  Enhance your suspension performance with the LC Racing 2.5mm Carbon Fiber Front Shock Tower. Crafted from 100% carbon fiber, this upgrade delivers increased rigidity, reduced weight, and precise shock mounting for improved handling and durability. Features: 100% 2.5mm carbon fiber for strength and lightweight performance Increased rigidity helps maintain consistent suspension geometry Precision-drilled shock mount holes for accurate tuning Direct replacement for the stock front shock tower on LC Racing 1/14-scale models Includes: (1) Front Carbon Fiber Shock Tower A premium upgrade for racers seeking maximum strength, precision, and reduced weight up front.

Read more less

  🛠️ Keep your suspension together and performing at its best. The Traxxas Shock Spring Retainer Set includes upper and lower retainers for two shocks, providing a secure fit for your springs and helping maintain proper suspension function. Made from durable molded material, these retainers are a direct replacement for worn or damaged parts. ✅ Genuine Traxxas replacement parts✅ Fits two complete shocks✅ Includes both upper & lower retainers✅ Durable molded construction 📦 Includes:• Upper & Lower Spring Retainers for (2) shocks  

Read more less

Team Associated B6.1/B6.1D Gear Differential Outdrives [91785] 🔩 Smooth power transfer starts here! These Team Associated Gear Differential Outdrives are the perfect replacement for your B6.1 or B6.1D buggy. Precision-machined and durable, they’re ready to handle race-day abuse while keeping your diff performing like new. ✅ Direct fit for B6.1 and B6.1D gear differentials✅ Includes outdrives and pins for a complete refresh✅ Built tough for consistent, long-lasting performance Includes:(2) Gear Diff Outdrives(2) Outdrive Pins 📦 Part Number: 91785🏁 Brand: Team Associated

Read more less

Team Associated 13mm Rear Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

🏁 Lightweight Strength for Elite PerformanceUpgrade your RC10B74.2 or B74.2D with this Carbon Front Shock Tower, built specifically for Gullwing arms. Crafted from high-quality carbon fiber, this tower offers the perfect blend of lightweight performance and rigid durability to keep your suspension responsive and race-ready. 🔧 Key Features: Designed for RC10B74.2 and B74.2D platforms Compatible with Gullwing front suspension arms Constructed from rigid, lightweight carbon fiber Improves handling precision and durability 📦 Includes: (1) Carbon Front Shock Tower (Gullwing Arm) 🔥 A must-have for racers who want consistent performance on demanding tracks!

Read more less

Traxxas Slash 4x4 Pro-Built Rear Differential – Part #6789🔧 No Wrenching. Just Winning. Get back on the track in no time with the Traxxas 6789 Pro-Built Rear Differential. This factory-assembled drop-in replacement is designed specifically for the Slash 4X4, giving you hassle-free installation and reliable performance—no gear setup or grease required. ✅ Fully assembled and ready to install✅ Perfect fit for Traxxas Slash 4X4 Short Course Trucks✅ OEM quality with factory precision✅ Ideal for quick repairs or spares 📦 Includes:(1) Pro-Built Rear Differential (assembled)

Read more less

Take your charging game to the next level with the most powerful and advanced charger in the Traxxas lineup. The EZ-Peak Live Dual iD Charger delivers over 26 amps and 200 watts of output power, with dual ports, iD-technology, Bluetooth connectivity, and advanced app features. Whether you're running 4S LiPos or NiMH packs, this charger is built to handle it all—and fast. 🔋 Key Features: ✅ Dual Charging Power: 200W total output (up to 26+ amps) ✅ iD® Battery Recognition: Automatically configures charge settings for Traxxas iD-equipped batteries ✅ MAXX Charge Mode: Prioritizes one battery to reach full charge even faster ✅ Storage Mode: Prepares your LiPos safely for long-term storage ✅ Balance Charging: Optimized LiPo balance charge for better cell health ✅ EZ-Peak Live App Support: Monitor, update, and customize charger settings via Bluetooth ✅ Dual Cooling Fans: Keeps internal temps down during extended sessions ✅ Dual Balance Ports: Supports older Traxxas batteries with external balance leads ✅ USB Output Port: 2A charging for mobile devices on the go ✅ Universal AC Input: Charges from any 100–240V outlet 📱 EZ-Peak Live App: Compatible with iOS and Android, the free app unlocks advanced functions: Monitor real-time charge progress Customize charge profiles Update firmware Control multiple EZ-Peak Live chargers at once Turn iD® mode on or off for legacy batteries 🔧 Specifications: Input Voltage: 100–240V AC, 50–60Hz Charge Current: 1.0–26.0A+ Battery Types: NiMH: 5–8 Cells (Dual) LiPo: 2S–4S (Dual) Balance Port Drain Rate: 750mAh USB Output: 2A Dimensions: 204 x 174 x 68mm 💡 Note: Some features require Bluetooth and the free EZ-Peak Live App on a compatible mobile device. 🚀 Get back to the action faster with smart, high-performance charging that just works. The EZ-Peak Live Dual is a must-have for serious Traxxas enthusiasts.

Read more less

Team Exalt Pit Mat (24x48") w/ Anti-Fray Stitched Edge Part Number: EXA-PITMAT-2448 Upgrade your workspace with the Team Exalt Pit Mat — a premium solution for racers who want style, function, and durability in one sleek setup. Measuring 24" x 48", this pit mat provides ample room for wrenching while delivering a clean, professional appearance. ✅ Features: 🧵 Anti-fray stitched edges for long-lasting durability and a clean finish 🖐️ Smooth cloth surface for a comfortable and efficient workspace 🌱 Eco-friendly, non-slip rubber base keeps the mat securely in place 🧳 Lightweight and ultra-thin design — perfect for travel 🖨️ High-definition custom graphics with bold Exalt branding 🛠️ Ideal for pit tables, benches, or mobile workstations 📐 Specifications: Length: 48in (1219.2mm) Width: 24in (609.6mm) Thickness: 0.12in (3mm) 📦 Includes: (1) Team Exalt Pit Mat (24x48") Roll it out. Wrench in style. Represent Team Exalt.

Read more less

JConcepts F2 Finnisher Body – T6.1 / T6.2 (Clear)🏁 Aggressive Styling Meets Championship Performance! The JConcepts F2 Finnisher Body for the Team Associated T6.1 and T6.2 stadium trucks brings together high-performance aerodynamics, detailed styling, and a winning racing pedigree. Designed with a narrow front end for improved clearance and tire avoidance during tight cornering, the F2 delivers precise handling, reduced drag, and better durability in all racing conditions. Sculpted with JConcepts’ signature Finnisher lines—including the V step-down bed design, angular roof, and dual side windows—this body looks as fast as it performs. The F2 also includes two rear wing options for high- and low-bite tracks, giving racers versatile downforce tuning right out of the package. 🔧 Compatible with Team Associated T6.1 and T6.2 race trucks. ✨ Key Features: Original JConcepts F2 Finnisher styling Narrow arrow-based front for tire clearance Dual side-window design with aggressive angular cab Sculpted rear shock tower humps support multiple shock layouts Double-drop bed with rocker panel reinforcement Includes two rear spoiler options (high-bite and low/medium-bite) Clear polycarbonate with protective film Includes window masks and F2-specific decal sheet Spoiler mounting hardware included 📦 Includes: (1) JConcepts F2 T6.1/T6.2 Stadium Truck Body (Clear, Unpainted) (2) Rear Spoilers (1) F2 Decal Sheet (1) Window Mask Sheet (1) Spoiler Mounting Hardware Kit 🛠 Requires cutting, painting, and mounting. Shown painted for illustration purposes only. 🧩 Compatibility: Team Associated RC10 T6.1 Team Associated RC10 T6.2

Read more less

  Keep your lap timing setup clean and reliable with the EASYLAP Transponder Connect Cable, designed specifically for Kyosho Mini-Z Sport RWD chassis. This plug-and-play lead connects your EASYLAP transponder directly to the car’s board for stable timing performance without modification. ⚙️ Features: Designed for Kyosho Mini-Z Sport RWD models Direct plug-in connection — no soldering required Provides reliable power and data link to EASYLAP transponder Lightweight and compact for clean installation Ensures accurate lap counting and timing during races 📏 Specifications: Part Number: ET009-S Compatibility: Kyosho Mini-Z Sport RWD Cable Type: Transponder connection lead Use: Connects EASYLAP transponder to Mini-Z Sport receiver board 📦 Includes: (1) EASYLAP Transponder Connect Cable for Mini-Z Sport RWD 💡 Pro Tip:Pair with your EASYLAP timing transponder for seamless race lap detection on Mini-Z Sport RWD cars — a must-have for serious racers running club timing systems.

Read more less

  Haul More. Adventure Further. Expand your TRX-4M’s capability with the Traxxas Utility Trailer w/ Hitch, the ultimate 1/18-scale accessory for adding realism and function to your trail runs. Perfectly scaled and built tough, this trailer lets you haul gear, accessories, and scale cargo while keeping your crawler’s performance light and nimble. Scale Realism Meets Functionality The TRX-4M Utility Trailer is pre-assembled and ready to attach right out of the box with its quick-connect hitch system. Designed for rugged off-road durability, it features a well-balanced frame, realistic wheels, and robust construction that keeps your cargo stable no matter where your trail leads. Take customization even further with optional add-ons like the LED Light Kit (TRA9790) and Side Panels (TRA9798) — sold separately — to elevate both the look and functionality of your setup. Features: Detailed 1/18-scale realism with authentic trailer design Durable construction for rugged off-road use Quick and secure hitch attachment to your TRX-4M Balanced weight distribution for smooth towing Lightweight design keeps crawler performance unhindered Fully assembled and ready to attach Compatible with optional accessories: LED Light Kit (TRA9790) Utility Trailer Side Panels (TRA9798) 1/18 Overlander Rack (Scale By Chris) Includes: (1) TRX-4M Utility Trailer (1) Trailer Hitch (2) Rear Preload Shock Spacers (2) 2.5×8 mm Screws Compatibility: Traxxas TRX-4M (All models) Traxxas Tough — Tow It. Haul It. Trail It.

Read more less

  📡 Compact, Reliable, and Built for Electric RC PrecisionThe Futaba R304SB-E is a 4-channel, telemetry-capable receiver designed specifically for electric-powered RC vehicles. Featuring Futaba’s T-FHSS protocol, this receiver provides lightning-fast response, high signal stability, and full telemetry capability in a compact and efficient package. Unlike its sibling (the R304SB), the R304SB-E features a built-in internal antenna, providing a sleek, snag-free design ideal for tight chassis layouts and high-performance on-road or off-road builds. ⚙️ About the R304SB-E Perfectly matched for Futaba’s T-FHSS transmitters (such as the 4PM, 4PM+, and 7PXR), the R304SB-E delivers reliable control and telemetry feedback while maintaining a compact footprint. It’s optimized for electric vehicle (EP) applications, ensuring clear, interference-free operation under racing conditions — without the signal noise that can occur in gas or nitro setups. This receiver supports S.Bus2 connectivity, allowing advanced telemetry sensors to plug directly into the system, giving drivers access to live voltage, temperature, RPM, and more (depending on transmitter support). 🌟 Features T-FHSS Telemetry System – Real-time telemetry feedback 4-Channel Output – Ideal for most 1/10 and 1/8 electric vehicles S.Bus2 Compatible – Connect telemetry sensors directly Built-in Internal Antenna – Clean look, no exposed wire High-Speed Signal Transmission – Fast response for competitive driving Electric Models Only – Designed specifically for EP applications Compact & Lightweight Design – Perfect for tight chassis layouts 📊 Specifications Specification Detail Futaba System T-FHSS Channels 4 Telemetry Yes (T-FHSS only) S.Bus2 Ports 1 Range 70m (230ft) under optimal conditions Rated Voltage 4.8–7.4V Usable Voltage 3.5–8.4V Dimensions 35.1 × 23.2 × 12.5mm Weight 6.7g Connector Type J (Standard) Recommended Use Electric Powered Vehicles Only ⚠️ Important Notes ⚡ Electric Only: Not suitable for nitro or gas-powered models. 🚫 Compatibility: Works only with Futaba T-FHSS transmitters.(Not compatible with FHSS, S-FHSS, FASST, or FASSTest systems.) 📦 Includes (1) Futaba R304SB-E 4-Channel Receiver 🏁 Compact, telemetry-ready, and purpose-built for electric racing — the Futaba R304SB-E delivers precision and performance trusted by serious RC enthusiasts.

Read more less

  Upgrade your suspension setup with the LC Racing 2.5mm Carbon Fiber Rear Shock Tower, offering increased rigidity, reduced weight, and a premium race-ready look. Made from 100% carbon fiber, this tower provides improved strength over stock while maintaining precision fitment. Features: 100% 2.5mm carbon fiber for lightweight strength and durability Flat design (stock version has a bend) for enhanced rigidity Precision-drilled shock mount holes for accurate tuning Ideal for racers seeking improved suspension response Installation Note: When a rear body mount is needed, modification is required for proper body fitment A shim between the post and mount is recommended for best results Includes: (1) Rear Carbon Fiber Shock Tower A high-performance upgrade for LC Racing 1/14-scale vehicles, built for strength, precision, and style.

Read more less