Team Associated 13mm Rear Shock Spring. These replacement springs springs are intended for the Team Associated B6.4D, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

The Team Associated Factory Team B6 19mm Octalock LCF Slipper Pad is compatible with the Octalock spur gears. This design was debuted with the RC10B74.1 buggy, and are a great way to upgrade the transmission in your B4/B5/B6 series buggy or truck.  

Read more less

Team Associated RC10B74.2 Battery Mount Set. This is a replacement intended for the RC10B74.2 and B74.2D series of vehicles. Package includes battery mount parts tree, two rubber battery straps and mounting hardware. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

MIP Gen 2 Speed Tip Hex Driver (.050) [MIP9200S] 🛠️ Precision Meets Speed. Iconic, Upgraded. For over 30 years, MIP tools have been the gold standard in RC wrenching. Now, the Gen 2 Speed Tip series cranks it up with rugged durability and ergonomic finesse—built for pros who need speed, accuracy, and reliability. Perfect for your drill or power driver! 🔥 Gen 2 Upgrades: ✅ Laser-Etched Size Markings – No more squinting or guessing🎯 Color-Coded Ring – Instantly spot the right size🛡️ Black Oxide Coating – Better corrosion resistance, longer lifespan💪 Ergonomic Angled Tip – More comfortable and efficient than straight-cut designs 🔧 Built for Performance: Fits directly into power screwdrivers for fast action Tight tolerances for perfect fit—less wear, more wrenching Proudly Made in the USA Each tool is hand-assembled with care 📦 Includes:(1) Gen 2 Speed Tip Hex Driver (.050) 🇺🇸 Part Number: MIP9200S🔩 Brand: MIP📏 Category: Power Tool Accessories / RC Tools

Read more less

MIP Gen 2 1/10 Turnbuckle Wrench (3.70mm) (Lunsford/ProTek/JConcepts) [MIP9820] 🔧 The Legend Returns—Tougher, Smarter, Sleeker.The MIP Gen 2 1/10 Turnbuckle Wrench (3.70mm) is here to make your life easier—whether you’re dialing in toe or wrenching on your pit table before the next heat. Designed for Lunsford, ProTek, JConcepts, and similar 3.7mm turnbuckles, this tool locks in control with pro-grade precision and MIP’s legendary craftsmanship. 🔥 Gen 2 Upgrades:✅ Laser-Etched Size Markings – Instantly spot what you need🎨 Color-Coded Ring – Grab the right tool, every time🛡️ Black Oxide Finish – Rust-resistant, wear-proof, race-ready ⚙️ Wrench Features: Perfectly angled for ergonomic tuning Thin wall design reaches tight spots with ease Hardened steel shaft for long-lasting reliability Deep socket fits nuts on extended screws Polycarbonate handle is comfy, durable, and built for battle Hand-assembled and proudly made in the USA 📦 Includes:(1) Gen 2 1/10 Turnbuckle Wrench (3.70mm) 🧰 Part Number: MIP9820🛠️ Brand: MIP🇺🇸 Made in the USA

Read more less

MIP Nut Driver Speed Tip™ Bundle Set (Metric) [MIP9615] 🚀 Precision at Speed. Power Tool Ready.The MIP Nut Driver Speed Tip™ Bundle is built for fast-paced RC maintenance. Whether you're wrenching in the pits or building at home, these power tool-compatible tips bring pro-level efficiency with legendary MIP durability. Designed for cordless drills and drivers, they help you blast through nut removal without stripping or skipping. 🔥 Gen 2 Upgrades:✅ Laser-Etched Size Markings – Bold, crisp, and permanent🎨 Color-Coded Rings – Instantly spot the right size🛡️ Black Oxide Coating – Fights off rust and wear for long-lasting performance ⚙️ Speed Tip™ Features: Power Tool Compatibility – Fits into drills for quick removal Hardened Steel Shafts – Engineered to last through heavy-duty use Thin Wall Design – Gets into tight spaces without rounding Works with MIP Speed Tip™ Handle (MIP9220) for manual use Each tip is hand-assembled in the USA 📦 Includes:(1) 4.0mm Gen 2 Speed Tip™ Nut Driver(1) 5.0mm Gen 2 Speed Tip™ Nut Driver(1) 5.5mm Gen 2 Speed Tip™ Nut Driver(1) 7.0mm Gen 2 Speed Tip™ Nut Driver(1) 8.0mm Gen 2 Speed Tip™ Nut Driver 🧰 Part Number: MIP9615🛠️ Brand: MIP🇺🇸 Made in the USA  

Read more less

MIP Gen 2 Hex Driver (0.9mm) [MIP9212] 🔧 Mini Tip. Major Performance.When you need pinpoint precision for the tiniest screws in your RC arsenal, the MIP Gen 2 0.9mm Hex Driver is the go-to weapon. Built with the same bulletproof quality MIP is known for, now upgraded for even more durability, comfort, and style.🔥 Gen 2 Upgrades You’ll Love:✅ Laser-Etched Size Markings – No fading, no guessing, just grab and go🎯 Color-Coded Ring – Quickly ID the right tool in a cluttered box🛡️ Black Oxide Finish – Resists rust, scratches, and daily wear💡 Angled Head – Better ergonomics = better control in tight spaces💎 Why MIP Rules the Tool Game: Diamond Ground Tips – Perfect fit, zero cam-out Thin-Wall Shaft – Gets into those tricky, recessed screws Legendary Amber Handle – Comfortable grip, hot or cold 100% USA Made & Hand Assembled – Built to outlast your toolbox📦 Includes:(1) MIP Gen 2 Hex Driver – 0.9mm🧰 Part Number: MIP9212🛠️ Brand: MIP🇺🇸 Made in the USA  

Read more less

  Traxxas BFGoodrich® Mud-Terrain™ T/A® KM3 Tires (2.4x1.0") – Part #9868🛞 Real Looks. Real Grip. Ready to Crawl. Upgrade your TRX-4M with officially licensed BFGoodrich® Mud-Terrain™ T/A® KM3 tires for unbeatable traction and scale realism. These 2.4x1.0" tires are perfect for conquering trails, rocks, and mud — just like the real thing. ✅ Officially licensed BFGoodrich® tread pattern✅ Molded in a high-traction rubber compound✅ Perfect scale detail with aggressive off-road look✅ Compatible with TRX-4M 1/18 scale vehicles 📦 Includes: (2) BFGoodrich® Mud-Terrain™ T/A® KM3 Tires (2.4x1.0")

Read more less

Boof RC Charging Lead – XT60 Female to EC3 Male A compact powerhouse for your charging setup, the Boof RC XT60 to EC3 lead is built for racers who need reliable performance and clean connections. Whether you're charging 2S or 3S LiPos, this lead handles the job with ease. ✅ XT60 Female plugs directly into your charger✅ EC3 Male fits many mid-size LiPo batteries✅ Flexible 12 AWG silicone wire for high-current loads✅ Precision-soldered and heat-shrunk for durability✅ Ideal for compact packs used in 1/10 scale vehicles 📏 Length: ~300mm⚡ Wire Gauge: 12 AWG🔌 Connector A: XT60 Female🔌 Connector B: EC3 Male 💡 Boof Tip: EC3 is the go-to connector for mid-range setups—this lead makes charging easy, safe, and fast.

Read more less

4 piece se 4.0  5.5 7.0 8.0     

Read more less

Pro-Motion 2.2" Rear Buggy Wheels (4)Available in White (3050-W) or Yellow (3060-Y) Engineered for Speed. Built to Dominate. Give your buggy the winning edge with Pro-Motion’s 2.2" Rear Wheels, designed for today's high-traction tracks. These wheels feature a reinforced inner rib structure for added durability without the weight penalty. The lightweight design and precision molding ensure a true, balanced rotation—exactly what you need for consistent traction and razor-sharp control. ✅ Fits most 1/10 scale buggies with 2.2" rear wheels✅ Lightweight inner rib design for enhanced strength✅ High-durability construction for racing abuse✅ Built-in vent holes reduce tire distortion✅ Available in sleek White or Fluorescent Yellow 📦 Includes:(4) 2.2" Rear Buggy Wheels 💡 Pro Tip: Match with Pro-Motion front wheels for a full performance setup that looks as good as it drives.

Read more less

Spektrum Firma Brushless Motor / ESC / Receiver Combo, 4500Kv: NASCARPART: SPMXSEMC25 The Spektrum™ Firma™ Smart Brushless Combo delivers cutting-edge performance and telemetry in one sleek package — perfect for the 1/12th Scale Losi NASCAR AWD and other compact RC platforms. With a 4500Kv brushless motor, integrated Smart telemetry ESC, and SR215 DSMR receiver, this combo is built for racers demanding responsive control, powerful acceleration, and worry-free durability. Features: All-in-one Smart telemetry system with no additional modules required Waterproof ESC with multiple programming options (button, USB, or programming box) Advanced 32-bit ARM M4 processor for precise performance High-quality 4-pole 4500Kv motor with CNC aluminum housing Hardened 2.3mm alloy steel output shaft and precision ball bearings Adjustable high-current BEC (6V @ 2A) Over-current, low-voltage, thermal, and failsafe protection Built-in aluminum heat sink for efficient cooling Compact SR215 receiver with DSMR technology for fast and reliable signal Bind-button eliminates the need for a bind plug IC2 connector compatible with Spektrum Smart Batteries Supports 2S–3S LiPo battery setups Ideal for surface racers who want maximum drivability and plug-and-play Smart convenience in a compact package. Drop it in and dominate the track.  

Read more less

Team Associated RC10B74 74mm CVA Bones (2) – Part 92193Smooth Power Transfer. Factory Replacement. The Team Associated RC10B74 74mm CVA Bones (92193) are direct replacement parts designed specifically for the RC10B74 platform. These precision-machined CVA bones are built to handle the rigors of racing, offering consistent drivetrain performance and durability. ✅ Designed for the Team Associated RC10B74✅ Precision-machined for smooth drivetrain engagement✅ Durable construction for long-lasting performance✅ OEM replacement – fits just like the original✅ Ideal for spares or fresh builds 📦 Includes: (2) 74mm CVA Bones Part #: 92193 💡 Pro Tip: Regular inspection and replacement of CVA components can help prevent drivetrain wear and unexpected failures on race day.  

Read more less

Team Associated 12mm Blue Aluminum Shock Bushings (4) – Part 91816Precision Fit. Race-Proven Durability. The Team Associated 12mm Blue Aluminum Shock Bushings (91816) are high-quality replacements designed for enhanced suspension performance and long-lasting durability. Perfect for demanding race setups, these bushings are crafted from lightweight anodized aluminum to maintain alignment and reduce play in the shock mounting. ✅ Fits 12mm shock mount applications on select Team Associated vehicles✅ CNC-machined from high-grade aluminum for strength and precision✅ Anodized blue for a sleek, professional finish✅ Reduces slop and enhances suspension consistency✅ Upgraded alternative to plastic bushings 📦 Includes: (4) 12mm Blue Aluminum Shock Bushings Part #: 91816 💡 Pro Tip: Use with matching shock components for maximum suspension precision and race-level performance.

Read more less

Team Associated 10mm Blue Aluminum Shock Bushings (4) – Part 91815Lightweight. Durable. Precision-Tuned. The Team Associated 10mm Blue Aluminum Shock Bushings (91815) are precision-machined replacements designed to improve durability and reduce slop in your shock mounting setup. These aluminum bushings offer a secure, high-performance fit and are a direct upgrade over stock plastic bushings. ✅ Fits 10mm shock mounts on various Team Associated vehicles✅ Machined from lightweight, high-strength aluminum✅ Anodized blue for a clean factory look✅ Improves durability and shock alignment✅ Direct replacement for worn or damaged bushings 📦 Includes: (4) 10mm Blue Aluminum Shock Bushings Part #: 91815 💡 Pro Tip: Swap out plastic bushings with these for a tighter, more responsive suspension feel—especially under race conditions.  

Read more less

Key Features 7075 T6 aluminum Clamping style with large m2.5 screw Length 18.5mm for smoother steering response and less stress on the servo Laser etched spline size Overview Designed for the steering servo in the RC8B3, RC8B3e, RC8T3, and RC8T3e. These new machined aluminum servo horns are stronger than the stock plastic ones that come with most servos and due to the slightly shorter length, they provide a smoother steering feel while decreasing the load on the servo.   ASC1361

Read more less

Traxxas Hoss 54T Spur Gear – 0.8 Metric Pitch (32P Compatible) – Part 3956XHigh-Torque Gear for Big Power Builds. The Traxxas 3956X 54-Tooth Spur Gear is specifically designed for the Hoss 4X4 VXL 4WD Monster Truck, providing durable power transfer for aggressive driving and brushless torque. With 0.8 Mod metric pitch (compatible with 32-pitch), it’s the perfect match for high-load conditions. ✅ 54-tooth spur gear – factory spec for torque-heavy setups✅ 0.8 Mod (metric pitch) – compatible with 32-pitch pinions✅ Heavy-duty molded construction – strong and durable✅ Designed for Hoss 4X4 VXL – optimized for monster truck drivetrain✅ Requires Traxxas #6780 Center Differential for installation 📦 Includes: (1) 54T Spur Gear (0.8MP / 32P compatible) Part #: 3956X 💡 Note: This spur gear is not a direct bolt-on—you’ll need the TRA6780 center differential to install it properly on the Hoss 4X4 VXL.  

Read more less

Traxxas 54T Spur Gear – 0.8 Mod / 32-Pitch – Part 3956RSmooth Power Transfer. Built for Brushless. The Traxxas 54-Tooth Spur Gear (3956R) is a direct replacement part for high-performance 1/10 scale models using a 0.8 Mod / 32-pitch gear setup. Ideal for brushless power systems, this gear delivers strong, consistent power transfer while holding up to heavy torque. ✅ Tooth Count: 54T – perfect for torque-balanced gearing setups✅ Pitch: 32P / 0.8 Mod – tough and compatible with brushless motors✅ Durable molded construction – long-lasting under load✅ OEM direct fit for Traxxas models using 32P spur gears✅ Compatible with slipper clutch systems 📦 Includes: (1) 54-Tooth Spur Gear (32P / 0.8 Mod) Part #: 3956R 💡 Pro Tip: Pair with the correct pinion gear to dial in your ideal torque vs. speed ratio for your terrain and driving style.  

Read more less

  ARRMA Front & Rear Composite Upper Gearbox Covers / Shock Tower Set Durable Composite Replacement PartsUpgrade or replace your worn-out components with this ARRMA Front and Rear Upper Gearbox Cover and Shock Tower Set. Made from tough composite material, these parts offer reliable durability and precision fitment—keeping your ARRMA vehicle running strong on the track or trail. 🔧 Features: ✅ Tough composite material for long-lasting durability ✅ Precision-manufactured for consistent fit and easy servicing ✅ Integrated gearbox cover, shock tower, body post mount, upper inner suspension mount, and steering brace ✅ High-specification shock towers built for rough terrain 📦 Includes: (1) Front Gearbox Upper Cover (1) Rear Gearbox Upper Cover

Read more less

RPM Extra Wide Front Bumper (Black) – RPM80042 Front-End Armor for Your Associated RideThe RPM Extra Wide Front Bumper is built for drivers who don’t hold back. With a full 6 inches of durable protection, this upgrade guards your chassis during head-on impacts and hard landings — perfect for bashing, racing, or rough terrain adventures. ✅ Features: 📏 6-inch width for maximum front-end coverage 🧱 High-strength RPM nylon absorbs big hits without cracking 🏁 Reinforced ribs double as skid rails for gliding over obstacles 🛬 Extra protection from hard landings and crash damage ⚙️ Direct fit for popular Associated models with no hassle 📦 Includes: (1) RPM Extra Wide Front Bumper (Black) 📊 Specifications: Material: RPM nylon composite Width: 6 in Color: Black Compatibility: Fits vehicles using Associated bulkheads #91359, #91364, or #9562 Compatible Models: Team Associated Trophy Rat Pro2 RT10SW RB10 B5 T5 Whether you bash or race, the RPM Extra Wide Front Bumper adds serious protection where it counts. Don’t just survive impacts — dominate them. 💥

Read more less

  Team Associated 3x24mm V2 Chrome Screw Mount Front Shock Shafts (2pcs) Smooth Front-End Performance for Your B74. Upgrade your RC10 B74 with this set of Team Associated 3x24mm V2 Front Shock Shafts. These chrome-finished, screw-mount style shafts offer enhanced durability, smoother shock action, and a secure fit for high-performance 4WD racing. Designed as a direct replacement or tuning option for your front shocks. 🔩 Features: 🧲 Chrome Coated – For smoother shock travel and reduced stiction 🔧 Screw-Mount Piston Design – Secure piston installation (no E-clips required) 💪 Built for long-lasting performance in competitive conditions 📦 Includes: (2) 3x24mm V2 Chrome Screw Mount Shock Shafts ✅ Compatibility: Team Associated RC10 B74 (Original) Fine-tune your B74 suspension and gain the edge with precision Team Associated hardware.

Read more less

Spektrum RC 3S Smart G2 LiPo Battery (11.1V/850mAh, 30C, IC2) Smarter Power in a Compact Package. The Spektrum Smart G2 3S 850mAh LiPo Battery brings advanced Smart technology to micro and compact-scale RC platforms. With automatic storage discharge, no balance lead, and built-in performance monitoring, this battery is optimized for both safety and convenience. Just plug it in and let Smart technology do the rest! ⚙️ Features: ✅ Smart G2 Technology – stores charge settings, battery health, and cycle history 🔌 IC2 Connector – one plug for power and balancing; no extra leads required 🔄 Auto Storage Discharge after 72 hours of inactivity to 3.90V per cell 🔥 Thicker Internal Plates for better heat dissipation and cell protection ⚡ Up to 1.5A Auto-Discharge Rate – 3x faster than previous G1 Smart batteries 📐 Specifications: Voltage: 11.1V (3S) Capacity: 850mAh Discharge Rate: 30C (Burst) Connector: IC2 Wire Gauge: 12 AWG Battery Type: LiPo (3.7V per cell) Cells: 3 (3S) ⚠️ Note: Requires a Spektrum G2 Smart Charger or updated Smart charger for compatibility. 📦 Perfect for compact aircraft, mini crawlers, or other micro 3S setups.  

Read more less

JConcepts XRAY XB2 2024 "S15" Clear Buggy Body w/Two Wings High-Performance Shell for Elite-Level Racing Give your XRAY XB2 2024 the competitive edge with the JConcepts "S15" Buggy Body. Designed with precision for both the Carpet and Dirt versions of the XB2 2024, the S15 body blends aggressive styling with aerodynamic refinement for maximum performance. Mid-body winglets, a rear stabilizer kick-up, and the iconic “shark fin” cockpit spine enhance stability, steering response, and on-track handling. Whether you're running a tall shorty or the recommended saddle pack layout, the revised side-pods ensure proper clearance and a clean fit. Molded from clear polycarbonate, the S15 is ready for your paint scheme and includes everything you need to finish it off with professional results. ✨ Features: 💨 S15 Styling – Based on the popular Silencer body, tuned for XB2 2024 layout 🧭 Forward Cab Bias – Improves steering and directional stability 🛡️ Mid-Body Winglets – Add downforce and side bite for increased grip 🦈 Cockpit Shark Fin – Enhances high-speed tracking and body rigidity 🔧 Raised Rear Side-Pods – Accommodates multiple battery layouts 🪶 Available in Regular & Lightweight Versions (this version is standard) ✂️ Includes Window Mask & Decal Sheet 📦 Includes: ✔ (1) Clear S15 Body for XRAY XB2 2024✔ (2) Rear Wings✔ (1) Window Mask Sheet✔ (1) JConcepts Decal Sheet ✅ Compatibility: XRAY XB2 2024 Carpet Edition XRAY XB2 2024 Dirt Edition 🖌️ Note: Body comes clear and unpainted. Painted body shown for illustration purposes only.

Read more less

Team Associated RC10B7 Caster Inserts & Shims Set – Fine-Tune Your Front-End Geometry! 🛠️ The Team Associated RC10B7 Caster Inserts and Shims Set offers precise adjustability for front-end tuning on your RC10B7 buggy. Whether you're chasing more cornering grip or improved straight-line stability, this set lets you customize your caster settings with ease. 🔧 Key Features: ✅ Replacement caster insert and shim set✅ Allows for precise front-end geometry adjustments✅ Durable molded construction for consistent fit and performance✅ Essential for fine-tuning steering response and cornering balance 📦 Includes: (6) Caster Inserts (2) Shims ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Tuning made easy.Add precision to your setup and get the most from your suspension with this caster tuning set from Team Associated. 🏁

Read more less

Team Associated RC10B7 Aluminum Rear Ballstud Mount – Lightweight & Durable Upgrade 🔧 The Team Associated RC10B7 Aluminum Rear Ballstud Mount is a precision-machined replacement part designed to enhance strength and consistency in your buggy’s rear suspension. Built from lightweight aluminum, this mount ensures durability and minimizes flex under load, helping maintain consistent camber gain and suspension response during high-speed cornering. 🔧 Key Features: ✅ CNC-machined aluminum for precision and durability✅ Reduces flex for consistent camber and roll-center performance✅ Lightweight design helps lower unsprung weight✅ Simple drop-in replacement for stock rear ballstud mount 📦 Includes: (1) Aluminum Rear Ballstud Mount ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Strength where it matters most.Upgrade your rear suspension with this high-precision aluminum ballstud mount for improved performance lap after lap. 🏁

Read more less

Team Associated RC10B7 Top Shaft – Precision Replacement for Smooth Power Delivery! ⚙️ Keep your RC10B7 or RC10B7D drivetrain performing flawlessly with the Team Associated Top Shaft!This precision-machined replacement part is built to deliver smooth, reliable power transfer, helping maintain your buggy’s peak performance on race day. ✨ Key Features: ⚙️ Precision Machined Top Shaft – Ensures smooth and efficient drivetrain performance 🔧 Direct Replacement – Designed specifically for easy fitment in the RC10B7 and RC10B7D 🏁 Factory Team Reliability – Manufactured to meet Team Associated’s competition-grade standards 🛠️ Essential for Maintenance – Restore like-new drivetrain function after wear or damage 📦 Includes: ✔ (1) Top Shaft 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Use as a direct replacement for the stock top shaft.🔹 Recommended for racers looking to maintain drivetrain reliability and performance. 🏁 Maintain peak drivetrain efficiency with the Team Associated Top Shaft! 🔥 Smooth power, consistent performance — race ready with Factory Team precision!   

Read more less

⚙️ Smooth Performance. Complete Bearing Upgrade. Built for the Trail. Restore efficiency and improve drivetrain performance with the FastEddy TRX-4M Ford Bronco Bearing Kit. Designed specifically for the Traxxas TRX-4M Ford Bronco, this complete bearing kit includes high-quality rubber-sealed steel bearings to replace worn bushings and bearings throughout your crawler. Instead of hunting down individual bearing sizes, FastEddy provides a complete application-specific kit so you get exactly what you need to keep your TRX-4M running smooth, efficient, and ready for the next adventure. ⚡ Features: ⚙️ Complete bearing kit designed specifically for the TRX-4M Ford Bronco💪 High-quality rubber-sealed steel bearings🛞 Reduces drivetrain friction for smoother operation🔧 Helps improve efficiency and runtime🏁 Restores worn driveline and axle performance🧰 Convenient complete kit—no guessing bearing sizes🚀 Ideal for maintenance, rebuilds, and performance upgrades 📦 Includes: (8) 3x6x2.5mm Bearings(4) 3.5x7x2.5mm Bearings (Metal Shielded)(4) 4x8x3mm Bearings(4) 5x8x2.5mm Bearings(2) 8x12x3.5mm Bearings 🔧 Compatibility: Traxxas TRX-4M Ford Bronco ⚠️ Important Notes: 📏 Bearing requirements may vary depending on production date and installed aftermarket upgrades.🔍 Please verify bearing sizes on your vehicle before ordering.📸 Product photos showing loose bearings are for illustration purposes only and may not represent the exact contents of the kit. 💡 Pro Tip: One of the best upgrades for any crawler is replacing worn bushings and bearings. A fresh bearing kit helps reduce drivetrain drag, improve battery life, smooth out drivetrain operation, and keep your TRX-4M performing like new on the trail. 🪨🚙🔥

Read more less

🏁⚙️ Fine-Tune Handling & Cornering Performance! The Hot Racing Anti-Roll Sway Bar Set is a performance tuning upgrade designed for the Losi NASCAR and Arrma Typhon Grom platforms. Featuring multiple sway bar stiffness options, this kit allows racers to precisely adjust chassis balance, reduce body roll, and improve cornering consistency for a more planted and predictable driving experience. Whether you're dialing in a race setup or looking for more stability through the turns, this sway bar kit delivers valuable tuning flexibility. 🏁 About the Sway Bar Set ⚙️ Adjustable Suspension Tuning This kit includes three different sway bar diameters, allowing you to adjust front and rear roll stiffness to suit: Track conditions Driving style Tire selection Chassis setup 🏎️ Improved Cornering Stability Proper sway bar tuning helps: Reduce body roll Increase cornering consistency Improve chassis balance Enhance steering response 🔧 Complete Installation Package Includes front and rear mounts, sway bars, sway bar balls, and set screws for a complete tuning solution. 🔧 Features ✔ Adjustable roll stiffness tuning✔ Fine-tunes front and rear suspension response✔ Improves cornering stability✔ Reduces chassis body roll✔ Helps balance steering and rear traction✔ Three sway bar stiffness options included✔ Durable performance upgrade components✔ Designed for competitive tuning applications 📦 Includes (2) 2.0mm Sway Bars (Black) (2) 1.8mm Sway Bars (Chrome) (2) 1.6mm Sway Bars (Gold) (1) Front Sway Bar Mount (1) Rear Sway Bar Mount (4) Sway Bar Balls with Set Screws 🚗 Compatibility Losi NASCAR Arrma Typhon Grom 💡 Perfect For ✔ Oval racing setups✔ NASCAR Grom tuning✔ Typhon Grom handling upgrades✔ Reducing body roll✔ Fine-tuning suspension performance ⚠️ Notes Designed for Losi NASCAR and Arrma Typhon Grom platforms Additional Hot Racing mounts may be required for some Arrma Grom applications Verify compatibility before installation      

Read more less

⚙️🏁 Ultra-Lightweight Performance for Maximum Efficiency The eXcelerate ION Aluminum 64 Pitch Pinion Gear is engineered for racers looking to reduce rotating mass and maximize drivetrain efficiency. Precision CNC-machined from high-strength aluminum, these lightweight pinions help improve acceleration and throttle response while maintaining excellent durability for competitive racing applications. Available in a wide range of tooth counts from 23T to 70T to help fine-tune gearing for any track condition. 🏁 About the ION Pinion Gear ⚡ Lightweight Performance Design The ultra-light aluminum construction reduces rotating mass, helping: Improve acceleration Increase drivetrain efficiency Enhance throttle response 🔧 Precision Machined Accuracy Each pinion is CNC-machined to ensure: Precise gear mesh Smooth operation Consistent performance 🛡️ Durable Anodized Finish The anodized coating helps reduce wear while maintaining a professional race-ready appearance. 🔧 Features ✔ Ultra-lightweight design for quicker acceleration✔ Precision CNC-machined construction✔ High-strength aluminum material✔ Durable anodized finish✔ Laser-etched tooth count identification✔ Smooth and efficient power transfer✔ Available in multiple tooth counts 📊 Specifications Pitch: 64 Pitch Bore: 3.17mm (1/8") Tooth Count Options: 23T–70T Material: Machined Aluminum Finish: Anodized 📦 Includes (1) eXcelerate ION Aluminum 64P Pinion Gear 💡 Perfect For ✔ 1/10 Electric Touring Cars✔ 1/10 Off-Road Buggies✔ Carpet Racing✔ Oval Racing✔ Competitive Stock & Modified Classes ⚠️ Notes Select desired tooth count when ordering Designed for motors with a 3.17mm (1/8") shaft Verify gearing compatibility before installation

Read more less

🌈✨ Bright Pop. Smooth Flow. Perfect for Eye-Catching Detail. The DSPIAE Soft Tip Fluorescent Acrylic Paint Markers deliver bold, high-visibility color for models, RC bodies, and creative projects. With a flexible sponge tip and high-coverage formula, these markers make it easy to add vibrant highlights and standout accents. 🏁 About the Fluorescent Markers 🌈 High-Visibility Color Designed with bright fluorescent pigments, these markers add eye-catching detail that pops under normal and bright lighting. 🎯 Precision & Versatility The soft sponge tip allows for both fine detail work and broader coverage—perfect for panel accents, highlights, and custom designs. 🧼 Easy Application & Cleanup The water-based acrylic formula provides smooth coverage while allowing easy corrections using alcohol. 🔧 Key Features ✔ High-coverage fluorescent acrylic formula✔ Bright, high-visibility colors✔ Flexible soft sponge tip for multiple techniques✔ Fine tip for detail and panel lining✔ Side stroke for larger coverage✔ Easy correction with alcohol✔ Ergonomic triangular barrel for comfort✔ Color-coded ends for quick identification 📦 Includes (1) Soft Tip Water-Based Acrylic Paint Marker 🎨 Available Fluorescent Colors (Variants) Fluorescent Red Fluorescent Yellow Fluorescent Orange Fluorescent Pink Green 💡 Perfect For ✔ Gunpla (Gundam model kits)✔ Pokémon model kits✔ RC body accents and highlights✔ Scale modeling and crafts 🧰 Recommended Use Highlighting edges and details Custom color accents Panel line enhancement with bold color  

Read more less

  🏁 Proven Race Design. Low Profile. Track-Ready Performance. The JConcepts S2 body for the 22X-4 is a championship-proven shell designed to deliver balanced handling, improved airflow, and a low center of gravity for competitive 4WD buggy racing. 🏁 About the S2 Body 🏎️ Low-Profile Performance The low overall height lowers the center of mass, helping your buggy stay planted through corners and transitions. 🎯 Balanced Handling A progressive cab design adds front-end downforce, improving steering response and overall balance on track. 🌬️ Optimized Airflow The channeled roof and side-pod vents improve airflow while adding rigidity to the body structure. 🔧 Key Features ✔ JConcepts Silencer 2 (S2) styling✔ Low-profile design for improved handling✔ Progressive cab for enhanced steering✔ Channeled roof for airflow and rigidity✔ Side window design for classic race look✔ Includes S-Type rear wings✔ Includes window masks and decal sheet 📦 Includes (1) Clear S2 Buggy Body (2) S-Type Rear Wings Window Mask JConcepts Decal Sheet 🚗 Compatibility Team Losi Racing 22X-4 1.0 Team Losi Racing 22X-4 2.0 ⚠️ Note: Body comes clear and unpainted Painted examples shown are for reference only 🏁 Lower CG. Better balance. Built to win on any track.  

Read more less

Gear Set Overview:This is a replacement differential ring gear and pinion gear set designed for select Traxxas models. It helps maintain smooth power transfer and reliable drivetrain performance. 🔧 Key Features ✔ Replacement ring & pinion gear set✔ Maintains smooth power transfer✔ Supports drivetrain durability✔ Direct fit design 📦 Includes (1) Ring Gear (1) Pinion Gear 🚗 Compatibility Fits select Traxxas models using this gear set Ideal for replacing worn or damaged gears, this set helps keep your drivetrain running smoothly and consistently.    

Read more less

Body Overview:This is a replacement clear body designed for the Losi Asphalt Late Model Grom platform. Made from durable polycarbonate, it’s ready for paint and customization while delivering a clean, race-inspired look. 🔧 Key Features ✔ High-strength polycarbonate construction✔ Clear body ready for custom paint✔ High-gloss finish when completed✔ Includes detailed window graphics✔ Direct fit design 📦 Includes (1) Clear Chevy Asphalt Late Model Body Window Graphics 🚗 Compatibility Losi Asphalt Late Model Grom Losi 1/12 Asphalt Late Model RC Race Car (Dale Earnhardt Jr. No. 8) Perfect for creating a custom race look or replacing a worn body, this clear shell gives you a clean slate with a true late model style.      

Read more less

  Tape Set Overview:This is a replacement hook & loop tape set designed for securing bodies on Team Losi Racing platforms. It provides a simple and reliable way to mount and hold your body in place. 🔧 Key Features ✔ Hook & loop mounting system✔ Helps secure body panels✔ Easy to apply and replace✔ Direct replacement set 📦 Includes (8) Hook Side Tabs (10x20mm) (8) Loop Side Tabs (10x20mm)

Read more less

  🔩 A simple, go-to tool for cutting wire, zip ties, and small RC components. These BOOF RC diagonal pliers are a solid addition to any pit box or workbench. 🔧 Highlights: ✔ Clean, precise cutting✔ Comfortable grip handles✔ Great for general RC use✔ Easy, reliable everyday tool 🔧 Simple. Solid. Gets it done.BOOF RC – No nonsense. Just works.    

Read more less

Easily connect your power system with the Spektrum IC3 to JST Adapter, designed to link IC3 batteries to JST-equipped devices. This compact adapter provides a simple plug-and-play solution for running smaller electronics without modifying your wiring. Featuring a female IC3 connector to female JST connector, this adapter ensures a secure and reliable connection while keeping your setup clean and efficient. 🔧 Features:• Converts IC3 battery connection to JST device• Female IC3 to female JST configuration• Compact, easy-to-use plug-and-play design• Reliable connection for consistent power delivery• No soldering required 📦 Includes:• (1) IC3 to JST Adapter ⚙️ Specifications:• Connector Type: IC3 (Female) to JST (Female) ✅ Compatibility:• E-flite UMX Cirrus SR22• E-flite UMX Citation Longitude• E-flite UMX Conscendo• E-flite UMX P-51D• E-flite UMX P-51D Voodoo• E-flite UMX Pitts S-1S• E-flite UMX Timber X Keep your setup flexible and ready to run with the Spektrum IC3 to JST adapter, making it easy to power JST-equipped models from IC3 batteries.    

Read more less