Step into the golden age of stock car racing with the officially licensed 1996 Chevy® Monte Carlo Clear Body for your Losi® NASCAR® Racecar! 🏁 Pro-Line delivers iconic 90s scale detail, giving your build that authentic throwback look. 🔥 Features: Officially licensed by NASCAR® and Chevrolet® Realistic 90s styling with windshield frames, side skirts & sponsor logos Pre-cut for faster prep and easier fitment Includes custom rear spoiler & mounting hardware Made from crystal-clear, durable polycarbonate Built-in paint-then-peel overspray film Made in the USA 🇺🇸 What’s Included: (1) Pre-Cut 1996 Chevy® Monte Carlo Clear Body (1) Black Rear Spoiler (1) Spoiler Mounting Hardware Set (1) Pre-Cut Decal Sheet (1) Window Mask Sheet (1) Paint-then-Peel Overspray Film Compatibility: Fits all 2024–2025 Losi® NASCAR® Racecars Paint Scheme Tip: Use Pro-Line paint colors PRO643603 (Orange), PRO643600 (White), and PRO643601 (Black) for a classic finish. Note: This body comes clear and unpainted. Vehicle chassis and tires not included. Shown painted for display purposes only.

Read more less

Upgrade your rear end with strength and style. The Losi Aluminum Rear Pivot Block Set brings precision-machined durability to your Mini-T 2.0 or Mini-B. Whether you're racing or bashing, these high-quality parts hold alignment better and stand up to abuse with sleek black anodizing and silver chamfered edges. 🔧 Features:✅ CNC machined aluminum construction for long-lasting performance✅ Black anodized finish with silver chamfers for a premium look✅ Includes both rear inner and outer pivot blocks✅ Improves durability and suspension consistency 📦 Includes:• (1) Rear Inner Pivot Block• (1) Rear Outer Pivot Block• Hardware 🚗 Compatibility:• Losi Mini-T 2.0• Losi Mini-B

Read more less

Boost durability and style with the Losi Mini-T 2.0 Aluminum Front Pivot. Precision CNC-machined from aluminum and finished in sleek black with silver chamfered edges, this upgrade adds strength right where it counts. Perfect for high-impact racing or just giving your Mini some custom flair. 🔧 Features:✅ CNC machined for precision fit✅ Anodized black with silver chamfered edges✅ Stronger than stock plastic part✅ Adds a premium, custom look 📦 Includes:• (1) Aluminum Front Pivot• (2) Set Screws 🚗 Compatibility:• Losi Mini-T 2.0• Losi Mini-B

Read more less

Keep your steering tight and responsive with the Losi Mini-T 2.0 Bellcrank Set. Designed as a direct replacement for worn or damaged components, this kit brings back factory steering precision so you can stay on target lap after lap. 🔧 Features:✅ Genuine Losi replacement for factory steering✅ Durable construction for long-lasting performance✅ Includes hardware for a complete install✅ Restores smooth, consistent steering feel 📦 Includes:• (1) Bellcrank Set• (Hardware) 🚗 Compatibility:• Losi Mini-T 2.0• Losi Mini-B

Read more less

Step up your racing game with these Stiffezel Front Suspension Arms for the TLR 22X! Engineered for high-performance racers, these arms provide increased stiffness and durability to enhance cornering, reduce flex, and maximize your control on high-bite tracks. 🔥 Features: Precision-engineered for the TLR 22X platform Stiffezel material delivers superior rigidity over stock arms Sharper steering response and enhanced high-speed handling Reduced flex = more precise suspension feel Perfect for traction-rich surfaces 📦 Includes:(2) Stiffezel Front Suspension Arms ✅ Compatibility:• TLR 22X• TLR 22X-4• TLR 22X-4 Elite• Losi 22S Sprint  

Read more less

This is a replacement Stiffezel Rear Arm Set for the Team Losi Racing 22 5.0 DC Elite 1/10 2WD Electric Buggy. Designed for VHA (Variable Hinge Angle) setups, these rear arms are optimized for dirt and clay tracks, offering enhanced rigidity and consistent performance. ✅ Fits:• TLR 22 5.0 DC Elite (2WD Buggy) ✅ Includes:• (1) Pair of VHA Stiffezel Rear Suspension Arms Perfect for racers looking to maintain top-tier handling and durability on loose surfaces.

Read more less

Upgrade your 22 5.0 series with precision gearing using the TLR 48 Pitch SHDS Spur Gear. Designed for use with the optional TLR Complete SHD Slipper System (TLR232085), these spur gears offer smooth, consistent performance and are available in a variety of tooth counts from 69T to 81T. ✅ Compatible with:• Losi 22 5.0 (with SHD Slipper System) ✅ Features:• High-strength composite construction• Available in multiple tooth counts (69T–81T)• Designed for 48 pitch setups• Perfect for fine-tuning your gear ratio 📦 Includes:(1) SHDS Spur Gear (choose tooth count)

Read more less

Fine-tune your buggy’s balance and handling with the Team Associated Steel Servo Chassis Weight, designed specifically for the RC10B6 and B6D platforms. Weighing in at 24 grams, this precision steel weight mounts securely under the servo to help lower the center of gravity and improve front-end stability — perfect for high-grip surfaces or drivers looking for a more planted feel. Constructed from high-quality steel, this tuning upgrade helps smooth steering response and adds consistency through corners without compromising agility. Installation is quick and easy using the included mounting screws. ⚙️ Features: Adds 24 grams of weight to optimize front-to-rear balance Lowers center of gravity for improved handling and steering feel Precision fit for Team Associated B6 and B6D buggies Ideal for high-traction tracks and fine-tuning race setups Made from durable steel for long-lasting performance Includes mounting hardware for easy installation 📏 Specifications: Part Number: 91747 Material: Steel Weight: 24g Vehicle Compatibility: Team Associated RC10B6 / B6D 📦 Includes: (1) 24g Steel Servo Chassis Weight (2) Mounting Screws 💡 Pro Tip:Combine this servo weight with a rear ballast plate or brass front bulkhead for the ultimate balance adjustment — helping you dial in your buggy to match any track condition.

Read more less

Team Associated CVA/Wheel Hex Pin (4) [91436]🔩 Lock It Down with Precision!The Team Associated CVA/Wheel Hex Pin Set is your go-to solution for keeping your drivetrain tight and reliable. These precision steel pins are perfect replacements for connecting rear CVA axles and bones, or securing wheel hexes to both front and rear axles. 🛠 Features:✅ Durable steel construction✅ Perfect fit for CVA assemblies and wheel hexes✅ Essential for smooth, consistent performance 📦 Includes:(4) CVA/Wheel Hex Pins 🔥 Part Number: 91436🏁 Compatible with multiple Team Associated platforms

Read more less

Upgrade your drivetrain with the Team Associated Factory Team 11mm Octalock LCF Slipper Pad. Originally launched with the RC10B74.1 buggy, this pad is designed to work with Octalock spur gears and offers smoother, more consistent slipper performance. It also serves as an optional upgrade for the original RC10 B74 series. ✅ Factory Team Performance – Designed for competitive precision and durability✅ Octalock Compatible – Works with Team Associated Octalock spur gears✅ Optional Upgrade – Updates older B74 models to the latest slipper assembly✅ Race Proven – Trusted by Team Associated drivers worldwide Compatibility: Team Associated RC10 B74 (original) Team Associated RC10 B74.1 Team Associated RC10 B74.1D A must-have for serious racers, the 11mm Octalock LCF Slipper Pad keeps your buggy smooth, efficient, and race-ready.

Read more less

Team Associated RC10B74.1 Anti-Roll Bar Set (1.8–2.0mm) – 92291🎯 Rear-End Mastery, Dialed to Perfection Step up your tuning game with this optional 1.8–2.0mm rear anti-roll bar set for your RC10B74.1 or B74.1D. Designed for racers who crave consistency and performance, this set lets you tweak rear-end roll stiffness to match track conditions with precision. 💡 Adjustment Effects:🔄 Softer = More rear roll, more rear grip, less front grip, less on-power steering🚀 Stiffer = Less rear roll, less rear grip, more on-power steering, quicker response in chicanes 💪 Key Features:✅ Includes 1.8mm, 1.9mm, and 2.0mm sway bars✅ Increases tuning flexibility for race-day perfection✅ Precision fit for RC10B74.1 and B74.1D buggies 🔧 Includes:• (1) 1.8mm Sway Bar• (1) 1.9mm Sway Bar• (1) 2.0mm Sway Bar 📦 Part Number: 92291🏁 Brand: Team Associated

Read more less

Team Associated RC10B74.1/RC10B74.1D Factory Team LTC Plastic Differential Rebuild Set. This is an optional differential rebuild set intended for the RC10B74.1 and RC10B74.1D. This differential rebuild uses the updated LTC (Low Torque Capacity) gearset allowing for improved driveability and traction. The high tooth count on the gears makes for smoother differential action that won't lock on power. NOTE: Recommended starting diff oils for dirt and clay are 15k (ASC5447) front, 200k (ASC5461) center, 10k (ASC5455) rear. Recommended starting diff oils for carpet and Astro turf are 20k (ASC5456) front, 15k (ASC5447) rear. COMPATIBILITY: Team Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated RC10B74.2 FT Chassis Protective Sheet. This is an optional chassis protective sheet intended to fit the Team Associated RC10B74.2 buggy. Using high quality adhesive backed vinyl, Team Associated has created a durable protective surface that not only is functional but looks great! Printed on the sheet is an accurate depiction of the B74.2 drivetrain layout, providing an "X-Ray" style look to the bottom of your vehicle. Package includes one main chassis protection sheet and three tail pieces giving you two extras.   COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated RC10B7 Factory Team Carbon Gearbox – 92406Upgrade your RC10B7 or B7D with the Factory Team Carbon Laydown Gearbox. Built with carbon-infused material, this optional gearbox delivers enhanced rigidity and long-lasting durability. Ideal for racers chasing ultimate chassis stiffness and consistent power transfer. Note: Increased rigidity may reduce rear traction depending on track conditions. ✔️ Carbon-infused for superior stiffness and durability✔️ Designed for RC10B7 and RC10B7D 2WD buggies✔️ Laydown configuration for optimized weight distribution✔️ Genuine Factory Team performance part✔️ Includes: (1) Carbon laydown gearbox housing Built to handle high power with Factory Team precision. 🏁  

Read more less

Team Associated RC10B7 Idler Gears (3) [92421] 🌀 Smooth Power, Every LapKeep the drivetrain of your B7 running smooth and strong with these genuine Team Associated RC10B7 Idler Gears. Designed for durability and precision, this 3-gear set ensures optimal power transfer and consistent performance during hard racing or long practice days. 🛠️ Includes:✅ (3) Idler Gears 🔩 Part Number: 92421🚗 Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

Team Associated RC10B7 Shock Tower Covers & Upper Wing Mount [92487] 💥 Upgrade your B7 with Precision Fit & Factory Style!Keep your buggy looking factory fresh and race-ready with the Team Associated RC10B7 Shock Tower Covers & Upper Wing Mount. Designed specifically for the RC10B7 platform, this set adds clean protection for your shock towers while locking down your rear wing with a durable, lightweight upper mount setup. 🏁 Why You’ll Love It:✅ Direct fit for the B7 platform—no mods needed🛡️ Protects your shock towers from dirt, debris, and damage🚀 Lightweight upper wing mount keeps your wing locked and stable🔩 Includes all the hardware you need—bolt it on and go! 📦 Includes:(2) Front Shock Tower Covers(1) Rear Shock Tower Cover(1) Upper Wing Mount SetMounting Hardware 🛠️ Part Number: 92487🏎️ Vehicle Compatibility: Team Associated RC10B7  

Read more less

MIP Gen 2 Metric Nut Driver (7mm) [MIP9804] 🔧 Classic Look, New-Level Performance.The MIP Gen 2 Metric Nut Driver (7mm) is built for serious RC work—whether you're building, wrenching, or tuning. This precision tool makes quick work of scale hardware, with rock-solid accuracy and grip in even the tightest spots. 🔥 Gen 2 Upgrades:✅ Laser-Etched Markings – Crisp and easy to read🎨 Color-Coded Ring – Spot your size fast🛡️ Black Oxide Coated Shaft – Fights rust, scratches, and wear ⚙️ Tool Features: Hardened steel shaft for tough, long-term use Deep socket design fits long screws and recessed nuts Thin wall for tight space access Ergonomic polycarbonate handle — comfy in all temps Hand-assembled and 100% made in the USA The go-to 7mm nut driver for pros and weekend warriors alike 📦 Includes:(1) Gen 2 Metric Nut Driver (7mm) 🧰 Part Number: MIP9804🛠️ Brand: MIP🇺🇸 Made in the USA

Read more less

Boof RC 12AWG Silicone Wire – Black (1 Meter / 3.3 Feet) 🖤 Sleek Looks. Reliable Power. Boof RC’s 12AWG Black Silicone Wire offers premium flexibility and durability for clean and reliable wiring. Whether you’re upgrading electronics or building custom charge leads, this wire is a solid go-to choice for RC hobbyists. ✅ 12AWG gauge – reliable current handling✅ Ultra-flexible silicone insulation✅ Low-resistance stranded copper conductor✅ Clean black color for a pro finish✅ Heat-resistant and easy to solder✅ 1 meter (approx. 3.3 feet) 📦 Includes:(1) Meter of Black 12AWG Boof RC Silicone Wire  

Read more less

Boof RC Adapter – T-Style Plug (Female) to EC3 (Male) with Short Wire Need to connect EC3 batteries to a T-plug setup? This Boof RC adapter features a clean, flexible short-wire design that gets the job done—no soldering needed. ✅ T-Style Female (Deans-type) to EC3 Male✅ Short wire provides flexibility without the bulk✅ Gold-plated connectors for reliable performance✅ Great for charging or running mismatched plug types 🔌 Connector A: T-Style (Female)🔌 Connector B: EC3 (Male)📏 Wire Length: Short (approx. 2–3 inches) 💡 Boof Tip: A handy solution for adapting gear on the fly—keep one in your box and never miss a heat.

Read more less

  Charge with confidence using the Boof RC XT60 to TRX-style charging lead — a reliable connection for your RC power needs. Whether you're juicing up packs on your bench or in the pits, this cable bridges modern XT60 chargers with the classic-style battery plug found on many RTR vehicles. ✅ XT60 female plugs directly into most smart chargers✅ Compatible with legacy "clip-style" battery connectors✅ 12 AWG silicone wire for safe, efficient current flow✅ Heat-shrunk terminals for clean, durable connections✅ Great for backyard bashers and race rigs alike 📏 Length: ~300mm⚡ Wire Gauge: 12 AWG🔌 Connector A: XT60 Female🔌 Connector B: TRX-style Male 💡 Boof Tip: Always double-check polarity and connector fit before plugging in. This lead is built for performance — just like your rig.  

Read more less

Flysky FS-R4P 4-Channel 2.4GHz ANT Receiver Compact. Capable. Reliable.The Flysky FS-R4P is a lightweight, 4-channel receiver designed for use with Flysky transmitters utilizing the ANT protocol. With plug-and-play simplicity and reliable long-range performance, it’s an excellent choice for RC cars, boats, and other surface applications. ✅ Features: 🔁 4-channel PWM output for straightforward servo or ESC control 📶 ANT protocol for fast, stable 2.4GHz signal 🛰️ 100–300 meter ground range for long-distance control 🧲 Integrated single antenna keeps the setup compact and clutter-free ⚡ Wide input voltage range of 3.5–8.4V 🪶 Lightweight and compact at just 6 grams 🔌 Easy plug-and-play setup — ideal for beginners and pros alike 📦 Includes: (1) Flysky FS-R4P 4-Channel Receiver (1) Instruction Manual 📊 Specifications: Channels: 4 Frequency: 2.4GHz Protocol: ANT Range: 328–984ft (100–300m) Input Voltage: 3.5–8.4V Dimensions: 22.6 x 20.6 x 25.5mm (0.89 x 0.81 x 1.0in) Weight: 6g (0.21oz) For RC drivers looking for a simple yet powerful receiver, the FS-R4P is a reliable solution that won’t weigh you down. 🏁  

Read more less

  Spektrum 2S 300mAh 30C LiPo Battery w/PH Connector Perfect Power for UMX Aircraft! The Spektrum 2S 300mAh LiPo Battery is the ideal match for E-flite UMX airplanes that require a 2S LiPo setup. With a lightweight design, high discharge rate, and a PH connector, this battery delivers consistent performance and flight time in a compact package. ⚙️ Features: ✅ Designed for E-flite UMX Airplanes 🔌 PH Connector for plug-and-play compatibility ⚡ 30C Discharge Rate provides up to 9 amps of continuous current 🔋 Compact and Lightweight for efficient power-to-weight ratio ⏱️ Supports Charging Up to 0.9A (3C) 📐 Specifications: Voltage: 7.4V (2S) Capacity: 300mAh Max Discharge: 30C (9 Amps) Max Charge Rate: 0.9A (3C) Connector: PH Length: 1.65" (42mm) Width: 0.74" (19mm) Height: 0.47" (12mm) Weight: 17g Discharge Lead Length: 2" (51mm) ⚠️ Note: Always use a compatible charger and follow LiPo safety guidelines. 📦 Great for UMX planes and small 2S electric aircraft.

Read more less

1up Racing Shock & Diff Oil Carrier Bag – Trackside Tuning, Organized 🎯 Keep your oils organized and protected with the 1up Racing Shock & Diff Oil Carrier Bag — the perfect solution for racers who bring the whole tuning bench to the track. Designed to fit 12 bottles of 1up Racing Pure Silicone Oils, this carrier keeps your setup clean, efficient, and ready for any condition. 💼 Featuring rigid, oil-resistant internal dividers and a durable zip-up enclosure, this bag is built to take spills, bumps, and race day chaos in stride. A woven carry handle and bold 1up Racing logo complete the look, making this the go-to organizer for serious racers. ✨ Key Features: 🧴 12 Dedicated Bottle Slots – Fits 41x41x105mm bottles like a glove🧽 Rigid Oil-Resistant Dividers – Won’t break down or absorb spills🧵 Zipper Enclosure – Securely seals your oils for transport🪢 Woven Carry Handle – Easy grab-and-go for race day🔥 Signature 1up Racing Look – Clean and professional trackside presence 📏 Dimensions: Individual Slots: 41mm x 41mm x 105mm\ Overall Bag Size: 22 x 17 x 12cm 🧰 Stay Dialed In – Wherever You Race From shock tuning to diff balancing, this carrier keeps your essential fluids safe, sorted, and spill-proof. No more mess. No more guesswork. 💡 Stay Race-Ready – Grab the 1up Oil Carrier Bag Today!

Read more less

Nitro Pro CT3 JTP RC 550 – Jared Tebo Signature Power 💪 Engineered in collaboration with pro driver Jared Tebo, the 3rd generation CT3 550 servo delivers elite-level performance and toughness for full-sized RC platforms. Whether you’re bashing, crawling, or racing, this servo is built to handle it all with zero compromise. 🧠 Featuring upgraded electronics, reinforced stainless gears, and an overhauled billet case, the CT3 JTP takes your control to the next level — delivering a massive 556 oz-in of torque at 0.085 sec. And yes, it’s IP67 waterproof, so weather won't stop the action. ✨ Key Features: ⚡ 556 oz-in Torque @ 7.4V – Insane power for serious 1/8 & monster builds⏱️ 0.085 Transit Speed – Lightning-fast response, built for pro-level control🛠️ Jared Tebo Signature Servo – Tuned and tested by a champion💧 IP67 Waterproof Rating – Drive confidently in all conditions🔩 Upgraded Stainless Gearset (316/304) – Tough, reliable, and precise🏗️ CNC Billet Aluminum Case – Strength and style with advanced cooling🔋 Brushless Motor – High-efficiency power and long-term performance✅ 12-Month Warranty + 100% Satisfaction Guarantee 📦 What’s in the Box? ✔️ (1) CT3 JTP RC 550 Servo✔️ Mounting Hardware✔️ Instruction Sheet 📊 Specifications: Torque: 556 oz-in Speed: 0.085 sec Motor Type: Brushless Waterproof Rating: IP67 Gears: 316/304 Stainless Steel Case Material: CNC Machined Aluminum Warranty: 12-Month No-Hassle 🧰 Built with Pros. Trusted by Racers. The CT3 JTP is the ultimate upgrade for those who demand next-level torque, speed, and durability — backed by Jared Tebo himself. 💡 Unlock Pro-Level Precision – Upgrade to Nitro Pro CT3 JTP Today!

Read more less

JConcepts F2 RC10B7 Clear Body w/ Wings (Standard Weight)📦 Includes Two Carpet / Turf / Dirt Wings The legendary F2 body by JConcepts is now available for the Team Associated RC10B7 and B7D platforms! Featuring the iconic Finnisher “V” layout, louvered roof, and double-step side pods, the F2 delivers sharp performance with a proven championship pedigree. Whether you’re racing on carpet, turf, or dirt, this body provides the precision, downforce, and durability racers demand. 🔧 Features: 🔹 Designed for the Team Associated RC10B7 / B7D 🔹 Original JConcepts F2 styling with Finnisher “V” details 🔹 Forward-biased cab and powerful windshield angle for precise steering 🔹 Tight profile follows chassis perimeter for clean fit 🔹 Slim nose fits over top deck and under shock tower 🔹 Louvered roof and double-step side pods for enhanced airflow 🔹 Built-in clearance for spur gear guard 🔹 Broad rear mounting ledge for secure fit 🔹 Clear polycarbonate with protective film (standard weight) 🔹 Includes window masks & JConcepts decal sheet 🏁 Includes: (1) F2 Clear Body (Standard Thickness) (2) 6.5" Carpet / Turf / Dirt Wings (1) Window Mask Set (1) JConcepts Decal Sheet 🛠️ Body requires trimming and painting. Compatible with RC10B7 and RC10B7D chassis.

Read more less

REEFS RC 9' Sticky Double-Sided 1"x108" Servo Tape Secure Your Electronics with Confidence! The REEFS RC 9' Sticky Double-Sided Servo Tape is the go-to solution for mounting servos, ESCs, receivers, and more. Designed with ultimate adhesion and easy peel-off, this heavy-duty tape ensures your RC components stay locked in place while still being simple to remove when needed. Whether you're bashing, crawling, or racing, this high-strength tape holds up against vibrations, impacts, and extreme conditions — making it a staple in any RC toolkit. ⚡ Key Features: ✅ 9 Feet Long — plenty of tape for multiple builds and repairs.✅ Double-Sided & Clear for a clean, professional finish.✅ 1” Wide (25mm) — perfect for servos, ESCs, receivers, and more.✅ 1mm Thick — provides excellent cushioning and grip.✅ Strong Adhesion yet easy to peel off without residue.✅ 55mm Roll Diameter — compact and easy to store. 📏 Specifications: 🔹 Length: 108" (9 feet)🔹 Width: 1" (25mm)🔹 Thickness: 1mm🔹 Roll Diameter: 55mm🔹 Type: Double-Sided, Clear 💡 Pro Tip: Perfect for mounting RC electronics, but also works great for drones, model kits, and DIY projects!

Read more less

Arrma Typhon Grom Composite Chassis (200mm) Direct Replacement Chassis for 1/14 Typhon Grom This composite chassis is a genuine Arrma replacement part, designed to match the stock 200mm wheelbase configuration. Made from tough composite materials and reinforced in high-stress areas, it ensures long-lasting durability and a precise fit for your Typhon Grom buggy. Features: ✅ Durable Composite Material – Built to handle rough terrain and high-impact action.✅ Precision Manufactured – Ensures a secure and reliable fit.✅ Reinforced High-Stress Areas – Extra material added where it’s needed most.✅ Integrated Lower Gearbox Housing & Suspension Mounts – Maintains the structural integrity of your buggy. Includes: 📦 (1) Composite Chassis - 200mm Wheelbase Compatibility: ✔ 1/14 Typhon Grom 223S DSC 4X4 RTR Brushless Buggy (ARA2306 & ARA2306S)✔ 1/14 Typhon Grom 4X4 RTR Brushed Buggy (ARA2106) Restore your Typhon Grom to peak condition with this high-quality replacement chassis! 🏎️💨  

Read more less

Battery, Power Cell AA Alkaline (4)

Read more less

Turnbuckle Overview:This is a replacement set of camber link turnbuckles designed for select Traxxas models. Pre-assembled with rod ends and hollow balls, they provide easy installation and precise suspension adjustment. 🔧 Key Features ✔ 39mm camber link turnbuckles✔ 69mm center-to-center length✔ Pre-assembled with rod ends and hollow balls✔ Includes left and right side✔ Allows precise camber adjustment✔ Direct fit replacement 📦 Includes (1) Left Turnbuckle Assembly (1) Right Turnbuckle Assembly 🚗 Compatibility Traxxas Drag Slash Traxxas Hoss Traxxas Nitro Slash Traxxas Rally Traxxas Rustler 2WD Traxxas Rustler 4x4 Traxxas Slash 2WD Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede 2WD Traxxas Stampede 4x4 Ideal for replacing worn or bent links, these turnbuckles help maintain proper suspension geometry and allow for accurate camber tuning.  

Read more less

Body & Wing Overview:This is a replacement clear lightweight body and wing set designed for the Team Losi Racing 22X-4 platform. It provides a fresh body setup ready for custom paint while maintaining a lightweight design. 🔧 Key Features ✔ Lightweight clear polycarbonate body✔ Includes matching wing✔ Ready to paint and customize✔ Direct fit replacement 📦 Includes (1) Clear Lightweight Body (1) Wing 🚗 Compatibility Team Losi Racing 22X-4 Perfect for refreshing your buggy’s look or building a custom paint scheme, this lightweight body and wing set keeps your setup race-ready.

Read more less

  Drag Link Overview:The Team Losi Racing 22X-4 Aluminum Drag Link is an optional upgrade designed to improve steering precision and durability. Machined from lightweight aluminum, it offers a more rigid connection for consistent steering response. 🔧 Key Features ✔ Lightweight aluminum construction✔ Improves steering precision✔ More rigid than stock components✔ Direct fit upgrade 📦 Includes (1) Aluminum Drag Link 🚗 Compatibility Team Losi Racing 22X-4 A simple upgrade that enhances steering feel and consistency, this aluminum drag link is a solid addition for racers looking for improved control.  

Read more less

Rear grip you can trust. The Avid Sweeper 2.2” Rear was designed for racers who want strong forward drive and dependable side bite without the rear feeling edgy or unpredictable. Built around an aggressive arched chevron pin layout, this tire keeps the back of the car planted whether you’re powering out of a corner or carrying speed through long sweepers. Push harder. Stay confident. Repeat every lap. 🏁 Compounds A3 Medium (Green) Ideal for high-bite office carpet Great for tracks that allow traction compound Excellent longevity for long practice days Balanced grip and wear A4 Soft (Red) Designed for lower-bite CRC, Beach, and EOS-style carpets Ideal where traction compound is not allowed Maximum forward and steering grip Slightly increased wear for peak performance 🛠 Design Details That Matter ✔ Arched Chevron Pin Layout Engineered for exceptional side bite and stability under load. The design keeps the rear planted through long sweepers and high-speed transitions. When you lean on it, it stays planted. ✔ Directional Design These tires are directional — the center tip of the chevron points toward the car. To eliminate mounting mistakes, directional arrows are integrated into the debossed Avid sidewall logo so you can confidently mount them correctly every time. ✔ Debossed Sidewall Logos No raised lettering to grab carpet fibers No glue cracking around logos Clean, consistent sidewalls ✔ Wide-Base Pin Structure Each pin features a larger base for improved support under load, creating predictable side bite and consistent rear grip when throttle control matters most. ✔ Soft Grey Foams Included Includes soft grey foams (recommended trim width: 35mm). Trimming improves: Stability on sideways landings Corner forgiveness Side bite consistency Overall rear confidence If you’re building a carpet setup that rewards aggression while staying stable, the Avid Sweeper Rear delivers planted rear grip you can rely on every lap.    

Read more less

  The Team Associated Factory Team 5x12x4mm Bearings are precision replacement bearings designed to restore smooth operation and reliable performance in critical drivetrain and rotating assemblies. Built to Factory Team standards, these bearings help reduce friction, improve efficiency, and maintain consistent performance on the track. Ideal for replacing worn bearings during maintenance or rebuilds to keep your vehicle operating at peak performance. Features Genuine Team Associated Factory Team bearings Precision construction for smooth rotation Helps reduce drag and improve efficiency Ideal for maintenance or performance rebuilds Factory-fit replacement Includes (4) 5x12x4mm Bearings Compatibility Team Associated RC10 B74 Other applications requiring 5x12x4mm bearings A dependable replacement choice for maintaining smooth, consistent performance in your RC vehicle. 🏁

Read more less

The R1WURKS Slipper Eliminator Gear is a precision-machined 48-pitch spur gear designed specifically for use with slipper eliminator hubs. Made from POM (Polyoxymethylene), this gear delivers low friction, excellent wear resistance, and consistent performance—ideal for stock racers running a locked-out drivetrain. Featuring a standard inner bore and bolt pattern, this gear fits most slipper eliminator hubs, including the R1WURKS B7 hub. Features & Specifications 48-Pitch spur gear Precision machined for accuracy and concentricity Made from POM (Polyoxymethylene) Low friction High durability Excellent wear resistance Standard inner bore and bolt pattern Designed for slipper eliminator setups Options 69 Tooth – 900055-69 72 Tooth – 900055-72 Includes (1) Precision machined slipper eliminator gear(Select desired tooth count) Fitment Team Associated RC10 B7 fitted with R1WURKS 900054-1 B7 Slipper Eliminator Hub or similar aftermarket hub Team Associated RC10 B7D fitted with R1WURKS 900054-1 B7 Slipper Eliminator Hub or similar aftermarket hub A lightweight, durable spur gear built for racers running slipper eliminators who want smooth power transfer and long service life. 🏁

Read more less

Dial in your suspension and steering geometry with the Hot Racing Aluminum Adjustable Camber & Steering Links Set, engineered specifically for the Losi NASCAR platform. Designed for precision, durability, and easy tuning, this upgrade gives you greater control over handling and steering response. Machined from durable aluminum, these adjustable links replace the stock components to provide increased strength and more accurate alignment control. Quick camber and toe-in adjustments allow you to fine-tune your setup for different track conditions, improving steering feel, stability, and overall performance. Built for OEM fitment, installation is straightforward and hassle-free. Features CNC-machined aluminum construction for increased strength Adjustable design for precise camber and toe-in tuning Improves steering response and handling consistency Durable upgrade over stock plastic links OEM fit for easy installation and proper geometry Includes (1) Aluminum Adjustable Camber & Steering Links Set A perfect upgrade for racers and drivers looking to improve durability, tuning flexibility, and on-track performance from their Losi® NASCAR.  

Read more less

The Reefs RC 99micro is a high-performance high-voltage digital micro servo designed for applications that demand serious torque, speed, and durability in a compact package. Featuring precision metal gears housed in a CNC aluminum case, the 99micro delivers smooth, powerful steering with excellent reliability—even under harsh conditions. With up to 115 oz-in of torque at 8.4V, fast transit speeds, and a fully waterproof design, this servo is ideal for competitive crawlers, minis, and scale builds requiring maximum performance without added bulk. Features High-voltage capable (6.0V–8.4V) All-metal gear drivetrain CNC aluminum casing for strength and heat dissipation Fully waterproof construction Dual ball bearings (2BB) Fast, precise digital response 25T micro spline No external BEC required Specifications Voltage: 6.0V – 8.4V Torque: 89 oz-in @ 6.0V 99 oz-in @ 7.4V 115 oz-in @ 8.4V Speed: 0.11 sec @ 6.0V 0.09 sec @ 7.4V 0.08 sec @ 8.4V Gear Type: Precision metal gears Bearings: 2 Ball Bearings Spline: 25T Micro Dead Band Width: 2 μs Dimensions (L×W×H): 0.90 × 0.47 × 1.08 in Weight: 0.70 oz BEC: Not required Part Number: SEHREEFS25 Perfect for builders looking for maximum torque, speed, and durability in a compact micro servo with true high-voltage capability.  

Read more less