⚙️ Genuine Replacement Power for Your Mini-Z! Keep your Mini-Z running at peak performance with the Kyosho MR-03/MR-04 Motor Set. Designed as a direct replacement for RWD Mini-Z MR-03 and MR-04 platforms, this motor delivers smooth power delivery, efficient operation, and factory-spec reliability. Whether you’re rebuilding, maintaining, or restoring your Mini-Z, this genuine Kyosho part ensures long-lasting performance and precision fit. ⚡ Features: Genuine Kyosho replacement motor for MR-03 & MR-04 RWD chassis Smooth, efficient brushed design for reliable power Factory-tuned for consistent performance and durability Direct plug-and-play installation — no modification needed Ideal for maintenance, repair, or rebuild projects 📦 Includes: (1) MR-03/MR-04 Motor Set 🔧 Compatibility: Kyosho Mini-Z MR-03 Kyosho Mini-Z MR-04 💡 Pro Tip:Pair this replacement motor with fresh bearings and cleaned gears for the smoothest possible power delivery and maximum runtime on track.

Read more less

Overview:Upgrade your Mini-Z or Xbility One platform with the PN Racing Machine Cut Nylon 14x20mm Flanged Rear Wheels. Engineered from a brand-new, high-strength nylon fiberglass formula, these wheels deliver the perfect balance of durability, precision, and handling performance. The machine-cut construction ensures perfect roundness and balance, helping you achieve smoother cornering and reduced tire deformation under load. Features: Offset: R14 Material: Super strong black nylon fiberglass — acetone-safe and highly durable Width: 14 mm Outer flange lip diameter: 21.5 mm Full machine-cut construction for maximum precision and balance Helps reduce tire movement under load Stiffens sidewall for improved stability and reduced traction roll Designed for XBILITY One rear wheel fitment Includes: (2) PN Racing Machine Cut Nylon 14x20mm Flanged Rear Wheels (R14 Offset)

Read more less

Smooth power. Precision control. Mini-Z performance perfected.The Atomic Zenon 4500KV Sensored Brushless Motor delivers high-efficiency power and ultra-smooth throttle response for Mini-Z racers looking to push their setup to the next level. Designed for precision handling and reliable torque delivery, this motor gives you the speed and feel needed to dominate tight technical tracks or long straightaways alike. Built to Atomic’s exacting standards, the Zenon motor features advanced sensored technology for consistent performance, fine throttle modulation, and improved low-end response — making it ideal for both stock and modified Mini-Z racing classes. ⚙️ Features 4500KV sensored brushless motor for Mini-Z platforms Delivers smooth, linear throttle response and strong torque High-efficiency rotor and stator design for maximum power with minimal heat Precision balanced for stable, vibration-free performance Compatible with Atomic and Kyosho Mini-Z MR-03, EVO, and similar brushless setups Compact and lightweight design for perfect chassis balance 📏 Specifications Spec Detail Motor Type Sensored Brushless KV Rating 4500KV Application Mini-Z 1/28-scale chassis Model Number MO-046 Manufacturer Atomic RC

Read more less

Overview:This is V2 strong double-side tape for Mini-Z racer wheels — a much higher-grade adhesive compared to R246 tape, providing superior hold and consistency during high-speed racing. Details: Specifically designed for 14mm Mini-Z wheels Size: 13mm x 15 feet Optimized adhesive strength for reliable tire mounting Durable, residue-resistant, and easy to apply Ideal for competitive racing environments Made in USA ✅ That one now completes your PN Racing tire tape trio: 700505A – Narrow (6mm) 700506A – Wide (10mm) 700508A – 14mm wheel version (13mm width)

Read more less

Maximum hold. Zero slip. Race-proven reliability.The PN Racing V2 Strong Tire Tape (Wide) is engineered for Mini-Z racers who demand uncompromising grip and durability. Made in the USA and built with a higher-grade adhesive than R246 tape, this V2 version ensures your tires stay locked to the rims under the most extreme racing conditions — no slipping, no separation, just consistent traction and confidence every lap. Perfect for both front and rear wheel applications, the 10mm wide design provides full coverage and uniform tire contact for maximum performance on all surfaces. ⚙️ Features V2 high-strength double-sided adhesive for Mini-Z racers Superior grip and hold compared to R246 tape Wide 10mm design for full rim coverage 15-foot roll – enough for multiple tire sets Ideal for high-traction and long-run durability setups Made in the USA 📏 Specifications Spec Detail Width 10mm Length 15 feet Adhesive Type Double-sided (V2 strong) Application Mini-Z Racer Wheels Country of Origin USA

Read more less

Keep your wiring neat and secure with the PN Racing Wire Holder Set. Designed for 22AWG wires and sensor wires, these compact holders help organize your chassis and prevent messy wire routing. Perfect for Mini-Z and other small RC builds where space is tight. ✅ Holds 22AWG wires & sensor wires securely✅ Compact size – ideal for Mini-Z and micro RC applications✅ Prevents tangling and improves wire management✅ Includes 10pcs per pack Includes: (10) Wire Holders Upgrade your wiring layout and keep your build clean with the PN Racing Wire Holder set — simple, effective, and racer-approved.  

Read more less

Upgrade your Jomurema GT01 setup with the PN Racing Front Bumper Body Mount Plate. Built from durable black PETG material, this mount plate is designed for a precise fit and reliable performance. Perfect for racers who want a clean and secure body installation. ✅ Direct Fit – Compatible with the Jomurema GT01 body✅ Durable PETG Construction – Strong, lightweight, and track-ready✅ Essential Upgrade – Provides proper mounting support for GT01 body Requirements: CP950 Jomurema GT01 Carbon Fiber Adapter Jomurema GT01 Car Body Set Material: Black PETGPart #: BMB950 Secure your GT01 body the right way with PN Racing’s Front Bumper Body Mount Plate — built for performance and durability.  

Read more less

The Marka V1 Ultra Soft Rear Tires provide extreme traction for demanding Mini-Z tracks. Perfect for racers chasing maximum grip. ✅ Ultra Soft Compound (05°) – Highest possible traction✅ 14mm Rear Size – Wider contact patch✅ Proven performance on RCP surfaces Part #: MZR-V1RR05-14Includes: 1 pair (2 tires)  

Read more less

Charge up to three packs at once with PN Racing’s 4mm Banana Plug to XH Parallel Charging Cable. Perfect for SCX24 stock batteries and any 2S LiPo with an XH connector, this cable makes charging and balancing multiple packs simple and efficient. ✅ Parallel Charging – Features 3x XH connectors to charge or discharge up to three packs at once✅ Safe & Flexible – Works with just one battery, or up to three (must be same type & capacity when charging together)✅ Perfect for SCX24 – Recommended charge rate 0.35A–0.5A for stock batteries✅ Durable Build – PE wrap protection with high-quality silicone wire✅ Premium Wiring – 14AWG for power / 22AWG for balance lead Specifications: Length: 18cm Plug: 4mm Banana → 3x XH Connectors Wire: 14AWG (power), 22AWG (balance) Protective Wrap: PE sheath Recommended Max Charge Rate: ≤1A ⚠️ Attention: Do not exceed 1A charge current. When charging multiple packs, use only batteries of the same type and capacity. Efficient, safe, and race-ready — the PN Racing Parallel Charging Cable is a must-have for anyone managing multiple small LiPo packs.    

Read more less

Upgrade your Mini-Z or micro-scale racer with the PN Racing V4 Anima High Speed Digital Servo. Built with titanium gears, a coreless motor, and an aluminum case, this servo is engineered for lightning-fast response and rock-solid durability in competitive racing. ✅ High Speed Response – 0.0645 sec/60° @ 4.8V 0.0495 sec/60° @ 6.0V ✅ Strong Torque Output – 1.21 kg-cm (25 oz-in) @ 4.8V 2.39 kg-cm (30 oz-in) @ 6.0V ✅ Premium Construction – Titanium gears, coreless motor, and aluminum case for strength and reliability✅ Lightweight & Compact – Only 11g, sized perfectly for 1/28 scale builds✅ Includes POM Servo Horn Set for easy installation Specifications: Voltage: 4.8–6.0V Speed: 0.0645–0.0495 sec/60° Torque: 1.21–2.39 kg-cm Size: 20 × 21 × 11.3mm (0.78 × 0.82 × 0.44 in) Spline: 25T Weight: 11g Wire: JST1.5, 80mm / 28AWG Servo Horn Screw: M2.5 (length varies by build) Compatibility: PN Racing PNR3.0 chassis Drift Art DA2.5 / DA3.0 chassis Built for speed, precision, and durability, the Anima V4 Titanium Gear Servo gives you the edge in every race.

Read more less

Upgrade your drivetrain precision with the XBility 64P 53-Tooth Spur Gear. Designed for smooth, efficient power transfer, this high-quality spur gear delivers consistent mesh and reliable performance for competitive 1/28-scale racing. Whether you're fine-tuning your gear ratio or replacing worn components, this PNWC-spec gear offers the durability and accuracy serious racers demand. Features 64 Pitch, 53-Tooth spur gear Precision-molded for consistent gear mesh Durable material for long-lasting performance PNWC-compliant design Ideal for ratio tuning and smooth drivetrain operation Includes (1) 53T 64P Spur Gear Notes General 64P gear component — vehicle-specific compatibility not provided by manufacturer Confirm fitment with your chassis or gearbox design before installation

Read more less

Upgrade your build with the XBility RC Titan Pivot Balls — precision-machined 4mm titanium balls designed for durability, smooth suspension movement, and long-lasting performance. Whether you're replacing worn components or stocking up on high-quality hardware, this 5-piece set offers reliable refinement for your RC projects. Features Precision 4mm titanium pivot balls Lightweight and extremely durable Corrosion-resistant titanium construction Provides smooth articulation and consistent suspension movement Ideal for high-stress linkage and suspension applications Universal-use hardware for RC builders and tuners Includes (5) XBility 4mm Titanium Pivot Balls Notes General-use upgraded hardware — vehicle compatibility not specified by manufacturer Always check your chassis manual to confirm pivot ball size requirements

Read more less

Upgrade your steering precision with the XBility RC XBOne Aluminum Servo Horn — a durable, high-strength replacement part engineered specifically for the XBOne 1/28 Performance RWD Chassis. Designed for accuracy and reliability, this CNC-machined horn ensures consistent steering response and eliminates flex found in plastic alternatives. Features CNC-machined aluminum construction for maximum durability Improved steering precision and consistency Direct replacement for the XBOne 1/28 chassis kit Lightweight design maintains optimal front-end performance Secure clamping fit for reliable servo engagement Includes (1) XBOne Aluminum Servo Horn

Read more less

The Hobbywing EZRun MINI28 Sensored Brushless ESC delivers next-level control and tuning in a tiny footprint — purpose-built for competitive 1/28-scale racing. Don’t let the size fool you… this ESC is absolutely loaded with features normally seen only on full-size race systems. At just 22.7 × 14.2 × 11.8mm, it fits cleanly into nearly any Mini-Z–style chassis, while the integrated aluminum heat sink keeps temps under control during hard runs. With 26 adjustable parameters, a high-voltage BEC, and OTA wireless programming (via optional module), the MINI28 gives racers every tuning edge possible. Key Features Designed specifically for 1/28-scale racing performance Ultra-compact and lightweight for tight chassis layouts Large integrated aluminum heat sink for temperature control High-voltage adjustable BEC (6V or 7.4V, 3.5A peak) Compatible with sensored and sensorless brushless motors Dual-mode App support (requires optional Hobbywing OTA module) Packed with 26 adjustable ESC tuning parameters Ideal for Mini-Z, GL Racing, PN, and other 1/28 platforms Specifications Continuous / Peak Current: 30A / 80A Motor Type: Sensored or Sensorless Brushless Motor Limit: 1626 size motors Battery: 2S LiPo BEC Output: 6V / 7.4V adjustable, 3.5A peak Dimensions: 22.7 × 14.2 × 11.8mm Weight: 5g (without wires) Programming: Via throttle cable or OTA module (sold separately) Includes (1) Hobbywing EZRun MINI28 Sensored Brushless ESC (1) ESC Manual Wiring harnesses

Read more less

Keep your Mini-Z running flawlessly with the Kyosho Motor Sensor Wire (80mm) — a genuine replacement part designed for smooth, reliable sensor connection between your ESC and motor. Perfect for maintaining optimal brushless performance on the Mini-Z MR-03 and MR-04 platforms. ⚙️ Features: Genuine Kyosho replacement sensor wire Designed for Mini-Z MR-03 and MR-04 brushless systems Provides accurate motor feedback for smooth, consistent throttle response Durable 80mm wire length for clean, secure fit 📦 Includes: (1) 80mm Motor Sensor Wire  

Read more less

Clean connection. Reliable signal. Perfect fit.The PN Racing Wire Connector for the V4 Anima ESC is a precision-made harness designed to connect your ESC to the receiver with a clean, secure, and interference-free link. Measuring 115mm in length, it provides the ideal balance between flexibility and reach for compact Mini-Z and micro RC installations. Built from high-quality materials for dependable conductivity, this connector ensures a solid signal path and professional-grade wiring finish — exactly what serious racers expect from PN Racing electronics. ⚙️ Features Designed specifically for PN Racing V4 Anima ESC Connects ESC to receiver for stable signal transmission 115mm length ideal for Mini-Z and small-scale chassis Durable, flexible wiring for clean installation Plug-and-play design – no soldering required Ensures consistent connection and low resistance 📏 Specifications Spec Detail Application V4 Anima ESC to Receiver Length 115mm Connector Type Signal/Power Harness Material High-quality flexible wire Manufacturer PN Racing Part Number 500826  

Read more less

High-temp. High-flex. High-quality.The PN Racing 20AWG i-MAC Silicone Wire delivers exceptional performance for high-demand RC builds. Rated for 200°C and 600V, this premium silicone wire is ultra-flexible, easy to solder, and built to handle extreme heat without losing conductivity or strength. Perfect for Mini-Z, ESC wiring, battery leads, or any custom electronics work where precision and reliability matter. Available in i-MAC Red or i-MAC Blue, each roll includes 5 feet of wire — ideal for compact RC setups that demand professional-grade quality. ⚙️ Features High-temperature 200°C-rated silicone insulation Handles up to 600V for high-power applications 20AWG gauge – strong, flexible, and easy to route Ultra-soft silicone jacket resists cracking and abrasion Perfect for Mini-Z, ESC, and battery lead wiring Available in i-MAC Red or i-MAC Blue Each pack includes 5 feet of wire 📏 Specifications Spec Detail Gauge 20 AWG Length 5 ft (per color) Temperature Rating 200°C Voltage Rating 600V Colors Available i-MAC Red / i-MAC Blue Material Pure Copper Wire w/ High-Flex Silicone Insulation Manufacturer PN Racing

Read more less

  Unleash performance and style with the Marka Mini-Z RK-BLD Racing Lexan Body Kit. Designed for a 98mm wheelbase, this unpainted Lexan body gives racers the flexibility to customize their car for both competitive and scale looks. ✅ 98mm Wheelbase Compatible – Fits popular Mini-Z and competition chassis✅ Lightweight Lexan Construction – Optimized for performance and durability✅ Unpainted & Customizable – Make it truly yours with your paint scheme✅ Complete Kit – Includes body, wing, hardware, and stickers Includes: 1 x Lexan Body 1 x Lexan Wing 2 x M2 Screws 2 x M2 Nuts 1 x Window Sticker 1 x Decal Sheet Requirements: PN Racing Lexan Body Mounting Kit (600800K) – not included Compatible with: Kyosho Mini-Z MR-02, MR-03, PN 2.5W, GL Racing GLA & GLR, Atomic AMZ & BZ, Jomurema KR128-R01, and more    

Read more less

Upgrade your PN Lexan Pan Car Body setup with the Carbon Fiber Front Bumper (600800E). Lightweight, durable, and precision-cut, this bumper improves rigidity and provides secure mounting for serious Mini-Z racers. ✅ High-Strength Carbon Fiber – Strong and lightweight for competitive racing✅ Precision Fit – Designed specifically for PN Lexan Pan Car Body systems✅ Easy Upgrade – Direct replacement for the stock fiberglass bumper Requirements: PN Lexan Pan Car Body (600800A) PN Lexan Pan Car Body Mount Posts (600800D) Material: Carbon FiberPart #: 600800E Take your Mini-Z pan car build to the next level with carbon precision and race-ready durability.

Read more less

Upgrade your Mini-Z with the PN Racing V2 Aluminum Interchangeable Front Body Mount Base. Made from high-strength aluminum, this mount replaces the stock Kyosho plastic base for improved durability and precision. Perfect for racers who swap bodies often, this system works with PN’s interchangeable carbon fiber adapter plates for quick and hassle-free changes. ✅ Durable Aluminum Construction – Stronger and longer lasting than stock plastic✅ Quick Body Swaps – Works with PN carbon fiber adapter plates (CPxxx)✅ Protects Your Chassis – Reduces wear on screw holes during frequent changes✅ Adjustable Fit – Add 0.3mm shims (BP801) for body height tuning Requirements: Body-specific PN carbon fiber adapter (CPxxx, matches Kyosho ASC base part numbers, e.g. CP201 for Ferrari ENZO) Color: OrangeMaterial: Aluminum Includes: (1) Aluminum Mount Base (2) M2x6 Screws (2) M2x8 Screws Part #: BM001A Take your Mini-Z body mounting system to the next level with the PN Racing V2 Aluminum Front Body Mount Base — built tough for racers who demand precision and flexibility.

Read more less