Replace your worn or damaged chassis with the Kyosho Mini-Z MR-03 Main Chassis Set. This replacement main chassis is designed for both MR-03 and MR-03VE models, providing a direct-fit solution to restore performance and reliability. Built to factory specifications, this chassis maintains proper component alignment and suspension geometry, making it ideal for rebuilds, repairs, or spare parts. 🔧 Features:• Replacement main chassis for MR-03 platform• Direct fit for MR-03 and MR-03VE models• Restores proper chassis alignment• Durable composite construction• Ideal for rebuilds or repairs 📦 Includes:• (1) Main Chassis Set ⚙️ Specifications:• Type: Main Chassis• Material: Composite ✅ Compatibility:• Kyosho Mini-Z MR-03• Kyosho Mini-Z MR-03VE    

Read more less

Fine-tune rear traction with the Kyosho 11mm Wide Racing Radial Tires. Designed for Mini-Z Racer series vehicles, these tires feature a directional radial tread pattern that performs well on both urethane and carpet surfaces. Left and right-specific tires provide consistent handling, while multiple compound options allow you to adjust grip for different track conditions. Softer compounds increase traction, while harder compounds reduce grip for smoother, more controlled handling. 🔧 Features:• 11mm wide radial tread design• Directional left and right tires• Works on urethane and carpet surfaces• Multiple compounds for traction tuning• Durometer rating etched inside tire• Designed for Mini-Z Racer series 📦 Includes:• (4) 11mm Racing Radial Tires ⚙️ Compound Options:• MZW38-10 - 10 Shore – Extra Soft (maximum grip)• KYOMZW38-20B - 20 Shore – Soft• KYOMZW38-30 - 30 Shore – Medium• KYOMZW38-40 - 40 Shore – Hard (reduced grip) ⚠️ Note:• Must be used with 11mm wide wheels        

Read more less

Dial in the perfect suspension feel for your XBility RC XBOne 1/28 Performance RWD chassis with this Front Shock Springs Set. Featuring five precision-tuned spring rates, this kit gives racers full control over front-end balance, traction, and responsiveness on any track. About the Front Shock Springs Set Tuning Options for Any Track This spring set includes two springs of each stiffness level—from extra soft to extra hard—allowing you to tailor your front suspension for your driving style and track surface. Run softer springs for maximum front grip and smooth weight transfer, or switch to stiffer rates for razor-sharp steering response and reduced chassis roll. Whether you're chasing more rotation, stability, or consistency, these springs make it easy to extract the exact handling characteristics your XBOne chassis needs. Features Five front spring rates for precision suspension tuning Easily adapt handling to any track condition Enhances steering feel, grip balance, and responsiveness Engineered for consistency and durability Color-coded for fast identification Effects of Spring Rate Changes Softer Springs Increased chassis roll Increased traction Better in bumpy conditions More likely to bottom out Stiffer Springs Decreased chassis roll Decreased traction Increased responsiveness Includes (2) Red – Extra Hard (2) Yellow – Hard (2) Medium – Stock Rate (2) Green – Extra Soft (2) Blue – Soft

Read more less

Fine-tune your XBility RC XBOne chassis with this Side Springs Set, engineered to deliver precision handling adjustments for competitive 1/28 racing. With five spring rates included, this set gives you full control over roll stiffness, cornering balance, and track-specific performance. About the Side Springs Set Precision Tuning for Performance The XBility XBOne Side Springs Set includes five pairs of color-coded springs, allowing racers to tailor suspension behavior for any surface or driving style. From maximum traction to high-response stability, each spring rate provides a distinct tuning effect that makes dialing in your chassis quick and repeatable. Easy to install and essential for competitive setup work, these side springs help optimize grip, rotation, and chassis balance—giving you the confidence to push harder every lap. Features Five spring rates for precision suspension customization Improves roll control and cornering stability Quick installation for fast trackside tuning Enhances grip, balance, and overall chassis performance Color-coded for easy identification Spring Rate Characteristics Softer Springs Increased chassis roll Increased traction Better in bumpy conditions More likely to bottom out Stiffer Springs Reduced chassis roll Decreased traction Increased responsiveness Includes (2) Extra Hard Side Springs – Red (2) Hard Side Springs – Yellow (2) Medium Side Springs – Stock rate (2) Extra Soft Side Springs – Green (2) Soft Side Springs – Blue

Read more less

Upgrade your PN Lexan Pan Car Body setup with the Carbon Fiber Front Bumper (600800E). Lightweight, durable, and precision-cut, this bumper improves rigidity and provides secure mounting for serious Mini-Z racers. ✅ High-Strength Carbon Fiber – Strong and lightweight for competitive racing✅ Precision Fit – Designed specifically for PN Lexan Pan Car Body systems✅ Easy Upgrade – Direct replacement for the stock fiberglass bumper Requirements: PN Lexan Pan Car Body (600800A) PN Lexan Pan Car Body Mount Posts (600800D) Material: Carbon FiberPart #: 600800E Take your Mini-Z pan car build to the next level with carbon precision and race-ready durability.

Read more less

Dial in your Mini-Z grip with the Kyosho 8.5mm Racing Radial Tires. Designed for Mini-Z Racer series cars, these tires feature a radial tread pattern with directional left and right sides for improved performance on both urethane and carpet surfaces. Available in multiple compounds, you can fine-tune traction for different track conditions. Softer compounds provide maximum grip, while harder compounds reduce traction for smoother handling. 🔧 Features:• Radial tread pattern for consistent grip• Directional left and right specific tires• Works on urethane and carpet tracks• Multiple compounds for traction tuning• Durometer rating etched inside tire• Designed for 8.5mm wheels 📦 Includes:• (4) 8.5mm Racing Radial Tires ⚙️ Compound Options:• KYOMZW37-20B - 20 Shore – Soft (maximum grip)• KYOMZW37-30 - 30 Shore – Medium• KYOMZW37-40 - 40 Shore – Hard (less grip, smoother handling) ⚠️ Note:• Must be used with 8.5mm wide wheels      

Read more less

The Kyosho Mini-Z MR-04 EVO2 MM2 Motor Case Set is a genuine replacement part designed specifically for the Mini-Z MR-04 EVO2 platform. This motor case set ensures proper motor alignment and secure mounting, helping maintain consistent drivetrain performance and reliability during racing or regular use. Ideal for repairs, rebuilds, or routine maintenance, this factory Kyosho component delivers precise fitment and durability you can trust for competitive Mini-Z racing. Features Genuine Kyosho replacement part Precision-molded for accurate motor alignment Restores proper drivetrain function Designed for long-term durability Compatibility Kyosho Mini-Z MR-04 EVO2 (MM2 configuration) Includes (1) Kyosho Mini-Z MR-04 EVO2 Motor Case Set 📦 Includes (3) Soft Rear Suspension Plates 🔧 Compatibility Kyosho Mini-Z MR-03(MM, LM, and MM2 configuration)    

Read more less

Smooth, consistent, and reliable — the FastEddy Sealed Bearing Kit is the easiest way to refresh your Kyosho Mini-Z MR-04EVO2 and bring its performance back to peak condition. Instead of hunting down individual bearings, this kit gives you exactly what you need for this platform in one convenient package. About the Kit FastEddy bearings are known for their high-quality steel races, durable rubber seals, and smooth operation, making them a great upgrade or replacement for worn-out factory components. These sealed bearings help reduce friction, increase efficiency, and keep dirt and debris out — ideal for indoor racing, RCP track use, or garage tuning. Important Note:Mini-Z models can vary based on production date and installed hop-ups.Always double-check your bearing sizes before ordering. Features Smooth, efficient performance Rubber-sealed to keep debris out Direct replacement for MR-04EVO2 bearings Cost-effective kit with exactly what you need Great upgrade over stock bushings Includes (7) 3×6×2.5mm Sealed Bearings    

Read more less

Secure your tires with confidence using the PN Racing V2 Strong Tire Tape. This high-grade double-sided tape provides a strong bond between tire and wheel, helping prevent tire slip during hard acceleration and cornering. Designed specifically for Mini-Z racing, this tape is ideal for rear wheels (11mm) and also works well for front wheel applications. The upgraded V2 material offers stronger adhesion compared to standard tapes, delivering reliable performance on high-grip tracks. 🔧 Features:• V2 high-strength double-sided tire tape• Designed for Mini-Z racing wheels• Ideal for 11mm rear wheels• Stronger adhesion than standard R246 tape• Helps prevent tire slip under load• Easy to cut and apply• Made in USA 📦 Includes:• (1) Roll V2 Strong Tire Tape ⚙️ Specifications:• Width: 9mm• Length: 15ft• Type: Double-sided tire tape  

Read more less

Increase steering durability with the Kyosho Metal Servo Gear for the Mini-Z MR-03. This optional upgrade replaces the 4th gear in the steering servo, providing improved strength and longer service life compared to the stock plastic gear. Designed as a direct replacement, this metal gear helps prevent stripping under heavy use and improves reliability during racing and high-grip conditions. 🔧 Features:• Metal upgrade for MR-03 steering servo• Replaces the 4th servo gear• Improves durability and wear resistance• Helps prevent stripped servo gears• Direct drop-in replacement• Ideal for racing and high-grip surfaces 📦 Includes:• (1) Metal Servo Gear ⚙️ Specifications:• Material: Metal• Position: 4th servo gear ✅ Compatibility:• Kyosho Mini-Z MR-03      

Read more less

Refresh and maintain your suspension with the Kyosho Suspension Small Parts Set for the Mini-Z MR-03. This replacement hardware set includes essential suspension components to restore proper fit, movement, and reliability. Perfect for rebuilds or replacing worn parts, this kit helps keep your MR-03 suspension operating smoothly and consistently. 🔧 Features:• Replacement suspension small parts set• Restores proper suspension performance• Ideal for maintenance or rebuilds• Genuine Kyosho replacement components• Precision fit for MR-03 platform 📦 Includes:• (1) Suspension Small Parts Set ⚙️ Specifications:• Application: Mini-Z MR-03 suspension hardware ✅ Compatibility:• Kyosho Mini-Z MR-03 📦 Includes (3) Soft Rear Suspension Plates 🔧 Compatibility Kyosho Mini-Z MR-03(MM, LM, and MM2 configuration)    

Read more less

Vehicle: XBility Nova GT The XBility Nova GT Bumper Weights Set is a precision tuning option designed to fine-tune front weight bias and steering response on the Nova GT platform. These optional weights install directly into the Nova GT bumper and allow racers to make small, meaningful balance adjustments without changing suspension geometry. Available in 1g or 2g, these weights are ideal for dialing in steering feel, improving front bite, and adapting to changing track conditions. ⚙️ Features Optional front bumper tuning weights for Nova GT Available in 1g or 2g configurations Allows precise front weight bias adjustment Improves steering feel and front traction Ideal for fine tuning across different track conditions Compatible with all XBility Nova GT bumpers 📦 Includes (2) Nova GT Bumper Weights(Weight option selected at purchase: 1g or 2g)  

Read more less

Upgrade your build with the XBility RC Titan Pivot Balls — precision-machined 4mm titanium balls designed for durability, smooth suspension movement, and long-lasting performance. Whether you're replacing worn components or stocking up on high-quality hardware, this 5-piece set offers reliable refinement for your RC projects. Features Precision 4mm titanium pivot balls Lightweight and extremely durable Corrosion-resistant titanium construction Provides smooth articulation and consistent suspension movement Ideal for high-stress linkage and suspension applications Universal-use hardware for RC builders and tuners Includes (5) XBility 4mm Titanium Pivot Balls Notes General-use upgraded hardware — vehicle compatibility not specified by manufacturer Always check your chassis manual to confirm pivot ball size requirements

Read more less

🔋 Next-Level Power for Your Mini-Z! Upgrade your Kyosho Mini-Z or other micro-scale RCs with the Gens Ace High Power Rechargeable AAA NiMH Battery Set. These premium 1.2V 750mAh cells deliver consistent voltage, fast recharge capability, and low self-discharge — perfect for racers who demand peak power and reliability run after run. Say goodbye to disposable batteries and hello to long-lasting, high-performance energy. ⚡ Features: Designed for Kyosho Mini-Z and similar micro-RC platforms High-capacity 750mAh cells for longer runtimes Quick-charging NiMH chemistry with excellent cycle life Low self-discharge keeps batteries ready to go Environmentally friendly rechargeable design Precision-matched cells for balanced performance 📐 Specifications: Type: NiMH AAA Voltage: 1.2V Capacity: 750mAh Configuration: 1S Weight: 11.8g per cell Dimensions: 44.4 × 10.1 mm 📦 Includes: (4) Gens Ace 1.2V 750mAh AAA Rechargeable NiMH Batteries 💡 Pro Tip:Pair these with a smart NiMH charger and rotate multiple sets to ensure consistent performance throughout race day.

Read more less

The Kyosho Mini-Z Narrow Tire Tape is a great option designed to firmly hold your tires to Kyosho Mini-Z wheels. This tape is available in both 7mm Narrow and 9mm Wide (KYOR246-1042) for different applications. Package includes one spool of narrow tire tape.Specifications:Length: 196.8" (5m)Width: 0.27"  (7mm)

Read more less

Overview:Upgrade your Mini-Z or Xbility One platform with the PN Racing Machine Cut Nylon 14x20mm Flanged Rear Wheels. Engineered from a brand-new, high-strength nylon fiberglass formula, these wheels deliver the perfect balance of durability, precision, and handling performance. The machine-cut construction ensures perfect roundness and balance, helping you achieve smoother cornering and reduced tire deformation under load. Features: Offset: R14 Material: Super strong black nylon fiberglass — acetone-safe and highly durable Width: 14 mm Outer flange lip diameter: 21.5 mm Full machine-cut construction for maximum precision and balance Helps reduce tire movement under load Stiffens sidewall for improved stability and reduced traction roll Designed for XBILITY One rear wheel fitment Includes: (2) PN Racing Machine Cut Nylon 14x20mm Flanged Rear Wheels (R14 Offset)

Read more less

Overview:This is V2 strong double-side tape for Mini-Z racer wheels — a much higher-grade adhesive compared to R246 tape, providing superior hold and consistency during high-speed racing. Details: Specifically designed for 14mm Mini-Z wheels Size: 13mm x 15 feet Optimized adhesive strength for reliable tire mounting Durable, residue-resistant, and easy to apply Ideal for competitive racing environments Made in USA ✅ That one now completes your PN Racing tire tape trio: 700505A – Narrow (6mm) 700506A – Wide (10mm) 700508A – 14mm wheel version (13mm width)

Read more less

The PN Racing KSK Compound RCP Radial Tires deliver consistent grip and smooth handling for Mini-Z racing on RCP surfaces. The radial tread pattern provides stable cornering and predictable traction, making them ideal for both competitive racing and tuning setups. Available in multiple compounds, these tires allow you to adjust traction based on track conditions. Softer compounds provide more grip, while harder compounds offer longer wear and smoother handling. 🔧 Features:• KSK compound for strong grip and long life• Radial tread pattern for stable handling• Designed for RCP track surfaces• 11mm width for Mini-Z setups• Laser marked part number inside tire• Multiple compounds for tuning performance 📦 Includes:• (2) Radial Tires ⚙️ Compound Options:• 30 Shore – Soft• 35 Shore – Medium• 40 Shore – Hard ⚙️ Specifications:• Width: 11mm• Surface: RCP• Quantity: 2 Tires    

Read more less

Maximize rear traction with the Marka V1 Rear Tires, designed for Mini-Z racing on RCP track surfaces. These slick-style rear tires provide strong forward grip and improved stability for high-traction setups. The 10° soft compound delivers maximum grip, making them ideal for low-traction tracks or when extra rear bite is needed. The 14mm width increases contact patch for improved acceleration and corner exit stability. 🔧 Features:• V1 rubber compound for RCP track performance• 10° soft compound for maximum traction• 14mm wide rear tire for increased contact patch• Smooth and predictable handling• Ideal for tuning rear grip• Designed for Mini-Z racing 📦 Includes:• (2) Rear Tires ⚙️ Specifications:• Width: 14mm• Compound: 10° Soft• Position: Rear• Surface: RCP      

Read more less

The Marka V1 Rear Radial Tires are designed for Mini-Z racing on RCP surfaces, delivering consistent traction and predictable rear-end stability. The radial tread design provides smooth forward bite while maintaining controlled cornering performance. The 15° medium compound offers a balanced blend of grip and durability, making it a great all-around option for many track conditions. The 14mm width increases rear traction and stability under acceleration. 🔧 Features:• V1 radial tread design for consistent grip• Designed for RCP track surfaces• 15° medium compound for balanced performance• 14mm width for increased rear traction• Smooth and predictable handling• Ideal for Mini-Z racing setups 📦 Includes:• (2) Rear Radial Tires ⚙️ Specifications:• Width: 14mm• Compound: 15° Medium• Position: Rear• Surface: RCP    

Read more less

Get reliable grip and long-lasting performance with the PN Racing KSK Compound RCP Slick Tires. Designed for Mini-Z racing on RCP-style surfaces, these 11mm slicks deliver smooth traction and consistent handling. Available in multiple compounds, these tires allow you to fine-tune traction for different track conditions. Softer compounds provide more grip, while harder compounds offer improved durability and smoother driving characteristics. 🔧 Features:• KSK compound for strong grip and long life• Slick tire design for RCP track performance• 11mm width for Mini-Z applications• Consistent and predictable traction• Laser marked part number inside tire• Multiple compounds for tuning performance 📦 Includes:• (2) RCP Slick Tires ⚙️ Compound Options:• 30 Shore – Soft (more grip)• 35 Shore – Medium• 40 Shore – Hard (longer life) ⚙️ Specifications:• Width: 11mm• Surface: RCP• Quantity: 2 Tires    

Read more less

Replace or rebuild your drivetrain with the Kyosho Mini-Z MR-03 Type MM Motor Case Set. This replacement motor case is designed specifically for MR-03 MM configuration, providing proper motor positioning and drivetrain alignment. Built to factory specifications, this motor case ensures smooth power transfer and consistent performance while maintaining correct fitment for MM setups. 🔧 Features:• Replacement MM motor case for MR-03• Designed for MR-03 Type MM configuration• Maintains proper motor alignment• Durable composite construction• Ideal for rebuilds or configuration changes 📦 Includes:• (1) Type MM Motor Case Set ⚙️ Specifications:• Configuration: MM (Mid Motor)• Application: Motor mount / drivetrain housing ✅ Compatibility:• Kyosho Mini-Z MR-03 (MM Type)    

Read more less

Fine-tune your steering feel with the PN Racing V2 Strong Tire Tape (Narrow). This high-grade double-sided tape is designed specifically for Mini-Z racing wheels, offering strong adhesion and flexible placement options. The 6mm narrow width is slightly smaller than most front wheels, allowing you to adjust tape placement to change steering response. Positioning the tape toward the outer edge increases aggressive steering, while placing it toward the inner edge provides a smoother, more stable feel. 🔧 Features:• V2 high-strength double-sided tire tape• Narrow design for steering tuning flexibility• Stronger adhesion than standard R246 tape• Ideal for Mini-Z front wheel applications• Adjustable placement for different steering feel• Easy to cut and apply• Made in USA 📦 Includes:• (1) Roll Narrow V2 Tire Tape ⚙️ Specifications:• Width: 6mm• Length: 15ft• Type: Double-sided tire tape    

Read more less

The PN Racing Front Bumper Body Mount Plate is designed specifically for mounting the PN Racing Concept C9 body. Made from durable black PETG material, this plate provides a secure and lightweight solution for proper body positioning and support. Built for precision fitment, this mount works with the PNR C9 plastic body and required adapter components, helping maintain correct alignment and consistent body mounting for Mini-Z racing setups. 🔧 Features:• Designed for PN Racing Concept C9 body• Durable black PETG construction• Lightweight and strong design• Provides secure front body mounting support• Precision fit for consistent alignment 📦 Includes:• (1) Front Bumper Body Mount Plate ⚙️ Specifications:• Material: Black PETG• Application: PN Racing Concept C9 Body ⚠️ Requirements:• PNR C9 ABS Body Carbon Fiber Adapter• PNR C9 Body Set ✅ Compatibility:• PN Racing C9 Plastic Body (600500)  

Read more less

Compounds: Super Soft • Soft • Medium • Hard Get race-winning consistency with PN Racing’s KS Compound RCP Slicks, engineered for precision performance on Mini-Z RCP tracks. The KS compound delivers progressive grip that increases as tire temperature rises, giving you confident traction through every corner. Designed in an 11mm width, they’re perfect as front tires when paired with 14mm rears — or as balanced rears for lighter setups. ⚙️ Features: KS Compound provides more grip as tires warm up for consistent performance Ideal for RCP track surfaces and cold-to-moderate climates Low-profile 1.6mm design reduces flex for sharper steering 11mm width — excellent for front tires when using 14mm rears Long-lasting, stable feel with minimal break-in required 📏 Specifications: Tire Width: 11mm Thickness: 1.6mm Recommended Use: Front tire when using 14mm rears Track Type: RCP foam track Fitment: Mini-Z MR-03 / MR-04 / MR-015 / MR-02 and compatible chassis 🧪 Compound Options: KS2130 – Super Soft (30 Shore) 🟣 Maximum traction, best in cooler temps KS2134 – Soft (34 Shore) 🔵 Balanced grip for general conditions KS2138 – Medium (38 Shore) 🟢 Stable and smooth on warm tracks KS2142 – Hard (42 Shore) 🟠 Long-wearing, ideal for hot or high-grip surfaces 📦 Includes: (2) PN Racing KS Compound 11 mm Slick Tires 💡 Pro Tip:Pair 11 mm KS fronts with 14 mm rears to fine-tune steering response and rear-end stability — the perfect setup for Mini-Z racers chasing consistency and corner speed.  

Read more less

  Compound Options: Super Soft • Soft • Medium • Hard Experience race-proven grip and consistency with the PN Racing KS-M Compound Low Profile Slicks—engineered for RCP tracks and cool-temperature performance. These precision-molded slick tires offer rapid warm-up, instant traction, and long-lasting balance throughout your run. After months of R&D, PN Racing has perfected this 1.6 mm low-profile tire design for unmatched feel and cornering stability. Whether you’re competing in stock or modified classes, these slicks deliver smooth control, durability, and the confidence to push every lap. ⚙️ Features: KS-M compound provides quick warm-up and consistent grip, even in cooler conditions Low-profile 1.6 mm design reduces sidewall flex for sharper handling Optimized for RCP track surfaces Mounts directly to 20 mm rims (23.2 mm mounted diameter) Excellent wear life and predictable break-in behavior Ideal for stock or advanced racing classes 📊 Specifications: Tire Type: Slick (Low Profile) Width: 11 mm Thickness: 1.6 mm Mounted Diameter (on 20 mm rims): 23.2 mm Compound Options: KSM630 – Super Soft 🟣 KSM634 – Soft 🔵 KSM638 – Medium 🟢 KSM642 – Hard 🟠 Recommended Surface: RCP foam track 📦 Includes: (2) PN Racing KS-M Compound 11 mm Low Profile Slick Tires 💡 Pro Tip:No truing required for stock class — just one battery pack of runtime provides a perfect break-in. For advanced racers, true only 0.1 – 0.2 mm of the surface to unlock ultimate balance and precision grip.

Read more less

Unmatched Grip. Proven Performance. Engineered for RCP tracks and fine-tuned through extensive testing across the USA, the Reflex Racing 11mm Radial Tire (30°) delivers elite-level traction, corner stability, and forward bite. Designed from the ground up for competitive Mini-Z racers, this tire provides consistent performance and superior control lap after lap — trusted by both pros and weekend racers alike. Advanced Radial Design Unlike traditional directional tires, the Reflex Racing Radial features a non-directional tread pattern precision-cut directly into the slick — not molded over it. This design reduces tread flex under load, resulting in incredible stability during rotation and enhanced exit traction. Even as the tread wears down, performance remains sharp and consistent for longer track life. Optimized for Corner Speed The 11mm tire is 25.25mm in diameter (when mounted with super glue), optimized for maximum corner speed and smooth rotation. The 30° compound performs across a wide temperature range — from 45°F to 80°F — maintaining reliable grip in changing track conditions. For ultra-high grip environments, simply trim the tire for more rotation in tight corners. Features: Designed specifically for RCP track surfaces Non-directional radial tread for even wear and stable handling Superior cornering stability and exit traction Long-lasting 30° compound performs even after visible tread wear Optimized 25.25mm diameter for faster corner speed Proven performance by racers nationwide Includes: (2) Reflex Racing 11mm Radial Tires – 30°(Wheels not included; shown for reference only) Reflex Racing — Precision. Performance. Proven.

Read more less

Upgrade your Jomurema GT01 setup with the PN Racing Front Bumper Body Mount Plate. Built from durable black PETG material, this mount plate is designed for a precise fit and reliable performance. Perfect for racers who want a clean and secure body installation. ✅ Direct Fit – Compatible with the Jomurema GT01 body✅ Durable PETG Construction – Strong, lightweight, and track-ready✅ Essential Upgrade – Provides proper mounting support for GT01 body Requirements: CP950 Jomurema GT01 Carbon Fiber Adapter Jomurema GT01 Car Body Set Material: Black PETGPart #: BMB950 Secure your GT01 body the right way with PN Racing’s Front Bumper Body Mount Plate — built for performance and durability.  

Read more less

Charge up to three packs at once with PN Racing’s 4mm Banana Plug to XH Parallel Charging Cable. Perfect for SCX24 stock batteries and any 2S LiPo with an XH connector, this cable makes charging and balancing multiple packs simple and efficient. ✅ Parallel Charging – Features 3x XH connectors to charge or discharge up to three packs at once✅ Safe & Flexible – Works with just one battery, or up to three (must be same type & capacity when charging together)✅ Perfect for SCX24 – Recommended charge rate 0.35A–0.5A for stock batteries✅ Durable Build – PE wrap protection with high-quality silicone wire✅ Premium Wiring – 14AWG for power / 22AWG for balance lead Specifications: Length: 18cm Plug: 4mm Banana → 3x XH Connectors Wire: 14AWG (power), 22AWG (balance) Protective Wrap: PE sheath Recommended Max Charge Rate: ≤1A ⚠️ Attention: Do not exceed 1A charge current. When charging multiple packs, use only batteries of the same type and capacity. Efficient, safe, and race-ready — the PN Racing Parallel Charging Cable is a must-have for anyone managing multiple small LiPo packs.    

Read more less

Charge your 2S LiPo packs with confidence using PN Racing’s XT60 Female to JST-PH charging cable. Designed for GL Racing, Atomic AMZ/BZ, Jomurema, and other 2S LiPo batteries with a JST-PH connector, this cable gives you extra length and flexibility compared to the 25cm version. ✅ Universal Fit – Compatible with GL Racing, Atomic AMZ/BZ, Jomurema, and other 2S LiPo JST-PH batteries✅ XT60 Female Connector – Direct connection to most modern chargers and balance boards✅ Extra Length – 30cm cable for more flexibility in your charging setup✅ Durable Build – Protected by PE wrap for safety and longevity✅ Premium Wiring – 14AWG silicone wire for power / 22AWG for balance lead Specifications: Length: 30cm Plug: XT60 Female → JST-PH Wire: 14AWG (power), 22AWG (balance) Protective Wrap: PE sheath With added reach and the same PN Racing quality, the 30cm XT60 to JST-PH charging cable is the perfect pit upgrade for reliable and flexible LiPo charging.  

Read more less

Pair your Jomurema GT01 body with strength and precision using the PN Racing CP950 Carbon Fiber Adapter. Built from high-strength carbon fiber, this adapter reduces weight, adds durability, and ensures a perfect fit for competitive Mini-Z racing. ✅ Carbon Fiber Construction – Lightweight and ultra-durable✅ Adjustable Height – Includes spacers and shims for body height tuning✅ Optimized Fit – Designed specifically for the Jomurema GT01 body✅ Race-Ready Design – Improves handling consistency and body stability Requirements: PN Interchangeable Body Mount (BM001) Jomurema GT01 Body Color: Carbon Fiber BlackMaterial: Body Mount: Carbon Fiber Spacer: Fiber Glass Shims: Polycarbonate (PC) Includes: (1) Carbon Fiber Body Mount (1) 0.5mm Fiber Glass Spacer (1) 1.0mm Fiber Glass Spacer (1) 2.0mm Fiber Glass Spacer Part #: CP950 Get the perfect fit for your Jomurema GT01 body — lightweight, durable, and adjustable with the PN Racing CP950 Carbon Fiber Adapter.

Read more less

Dial in smooth corner exits with the Marka V1 Super Soft Rear Tires, delivering excellent grip without excessive wear. ✅ Super Soft Compound (10°) – Ideal mix of traction and control✅ 14mm Rear Size – Stable, planted handling✅ Built for competitive Mini-Z racing Part #: MZR-V1RR10-14Includes: 1 pair (2 tires)  

Read more less

The Marka V1 Ultra Soft Rear Tires provide extreme traction for demanding Mini-Z tracks. Perfect for racers chasing maximum grip. ✅ Ultra Soft Compound (05°) – Highest possible traction✅ 14mm Rear Size – Wider contact patch✅ Proven performance on RCP surfaces Part #: MZR-V1RR05-14Includes: 1 pair (2 tires)  

Read more less

Put the power down with Marka V5 Rear Tires, engineered for maximum traction out of corners. ✅ Very Soft Compound (15°) – High bite for rear-end stability✅ Designed for RCP track conditions✅ Delivers smooth, consistent grip Part #: MZR-V5RR15Includes: 1 pair (2 tires)  

Read more less

Increase front-end grip with the Kyosho Mini-Z LM High Grip Front Tires. Designed for Mini-Z MR LM chassis, these tires provide improved steering response and consistent handling for high-performance racing. The 20 Shore compound is the softest option, delivering maximum front traction for high-grip tracks. Softer compounds increase steering bite, while harder compounds provide smoother, more stable handling. 🔧 Features:• High grip front tires for Mini-Z LM chassis• 20 Shore compound for maximum traction• Improves steering response and corner entry• Ideal for high-grip track conditions• Great for tuning front-end grip 📦 Includes:• (4) LM High Grip Front Tires ⚙️ Specifications:• Compound: 20 Shore (Soft)• Position: Front• Application: Mini-Z MR LM chassis            

Read more less