FlySky Noble NB4 Pro+ AFHDS3 18-Channel 2.4GHz Radio System w/ FGr4B & FGr8B Receivers 🔥 The Ultimate Transmitter for Champions! 🚗💨 The FlySky Noble NB4 Pro+ AFHDS3 18-Channel 2.4GHz Radio System is designed with elite RC racers and enthusiasts in mind. Packed with advanced technology, a high-resolution color touchscreen, and ultra-low latency response, this radio system delivers unmatched control, precision, and reliability. Whether you're racing, crawling, bashing, or flying, the NB4 Pro+ is the top choice of world champions! 🏆 With 18 programmable channels, a powerful 3450mAh battery for extended runtime, real-time telemetry monitoring, and USB Type-C connectivity, this system provides next-level customization, performance, and durability. The included FGr4B (4-channel) and FGr8B (8-channel) receivers ensure rock-solid signal stability with AFHDS3 digital frequency-hopping technology. ✨ Key Features: 🎮 18-Channel Support – Provides extensive control customization for multiple applications 🖥️ 3.5" Full-Dot Matrix Color Touchscreen – High-resolution 320x480 display for intuitive navigation ☀️ IPS High-Brightness Display – Designed for clear visibility even in direct sunlight 🎨 Customizable UI & Themes – Personalize the interface with custom wallpapers and channel names 🔌 USB Type-C Port – Supports coach mode, head tracking, and firmware updates 🔋 3450mAh Quick-Release Battery – Up to 18 hours of runtime with included power base 💾 Model Memory & Telemetry Support – Monitor real-time battery voltage, temperature, and signal strength 🔄 Adjustable & Detachable Steering Wheel – Configurable for left- or right-handed users 🏎️ Ultra-Low Latency 2CH Mode – Ensures instant response times for high-speed racing 📡 AFHDS3 Protocol – Automatic frequency-hopping technology eliminates interference 🚀 Ergonomic, Lightweight Design – Comfortable grip for extended use 🎒 Premium Carbon Fiber Carrying Case Included – Protects your radio system in style 📦 What’s in the Box? (1) FlySky Noble NB4 Pro+ AFHDS3 18-Channel 2.4GHz Radio System (1) FGr4B 2.4GHz 4-Channel AFHDS3 Receiver (1) FGr8B 2.4GHz 8-Channel AFHDS3 Receiver (1) 3450mAh 18650 Battery (1) Hard Carrying Case with Carbon Fiber Finish (1) FlySky Lanyard (1) Decal Sheet 📖 Product Manual 📌 Note: Everything needed is included—no additional accessories required! 📊 Specifications: Input Voltage: 1S LiPo / 3450mAh 18650 Battery Protocol: AFHDS3 Frequency: 2.4GHz RF Range: >300m Channels: 18 Dimensions (L x W x H): 5.62 x 4.72 x 9.13 in (142.7 x 120 x 232mm) Weight: 23.63 oz (670g) 🏁 Experience Unmatched Control & Performance! 🔥 Whether you're a competitive racer, rock crawler, or RC aviation enthusiast, the FlySky Noble NB4 Pro+ delivers next-generation precision, customization, and responsiveness. 💨 Upgrade today and take your RC experience to championship levels! 🏆🏁

Read more less

Keep your buggy looking sharp and handling at its best!These clear front wings are direct replacements for the RC10B7 and come in the same style as included in the kit. Perfect for having a backup on hand or customizing with your own paint job for that extra flair. ✅ Features: Official Team Associated replacement part Clear polycarbonate – ready for custom paint Matches the original RC10B7 kit wing Adds front-end downforce for better steering feel 📦 Includes: (2) Clear Front Wings for RC10B7 Upgrade, replace, or customize—your RC10B7 deserves the best!

Read more less

Team Associated RC10B6.4 / B7 Steering Hat Bushing Set – ASC91974Upgrade or replace worn bushings with this genuine Team Associated Steering Hat Bushing Set. Originally designed for the RC10B6.4 and B6.4D, this set is also compatible with the RC10B7 series. Perfect for keeping your steering smooth and precise, this pack includes four bushings – just what you need to tighten up your front end feel. ✅ Fits: RC10B6.4 RC10B6.4D RC10B7 RC10B7D 📦 Includes: (4) Steering Hat Bushings OEM Part #: ASC91974

Read more less

Team Exalt Shorty LiPo Battery Storage Case (LCG)PART #: EXA4053 Keep your race-day power organized, protected, and ready to roll with the Team Exalt Shorty LiPo Battery Storage Case. Designed to hold up to five LCG shorty LiPo batteries, this lightweight, 3D-printed case is the perfect addition to any pit setup. Built from high-quality PLA, this compact and durable box keeps your batteries secure during storage and transport—without taking up unnecessary space. Whether you're heading to a local club race or a national event, this case helps you stay race-ready and clutter-free. Features: Holds five LCG shorty LiPo batteries 3D printed from durable PLA material Compact and lightweight—ideal for transport Precision-sized battery slots keep packs secure Easy to fit into your tool bag or pit box Includes: (1) Shorty LiPo Battery Storage Case (holds 5 batteries) Specifications: Material: PLA Outer Dimensions: 6.5 x 5 x 2 in (165.1 x 127 x 50.8 mm) Slot Dimensions: 3.8 x 1 x 1.6 in (96.5 x 25.4 x 40.6 mm) Note: This case is for storage and transport only. Not designed for charging or fire-safe containment.

Read more less

Keep your differential running smooth and leak-free with the Team Associated 91782 Gear Differential Seals. Designed as a direct replacement for the B6.1 and B6.1D platforms, these seals restore proper diff performance, maintain consistent fluid viscosity, and help extend the life of your internal diff components. Perfect for routine maintenance or a full differential rebuild. Features Genuine Team Associated replacement seals Ensures proper diff sealing and fluid retention Helps maintain smooth, consistent differential action Ideal for rebuilds, maintenance, or performance refresh Compatible With B6.1 B6.1D And other Team Associated models using the same gear differential design

Read more less

Reedy 95mm Y-Connector (Black) – ASC27170Need to split a signal or power connection without cluttering your build? The Reedy 95mm Y-Connector offers a clean and efficient solution for a wide range of RC applications. Whether you're programming your ESC, running dual servos, or powering fans, this cable gets the job done. 🧩 Applications: 🔧 ESC Programming – Connect both fan and programmer when only one port is available 🛞 Dual Servo Setups – Run two servos from a single receiver channel ✈️ Aircraft Control Surfaces – Great for setups using dual servos for torque or redundancy 📏 Length: 95mm🎨 Color: Black🔌 Compatible with most standard RC connectors OEM Part #: ASC27170 Let me know if you want a version with variant colors, upsells, or if you're batching all Reedy wires and connectors into a collection!    

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated RC10B7 Factory Team Carbon Side Rails. Constructed from AE legendary carbon composite material, these optional side rails are intended for the Team Associated RC10B7 1/10 buggy to stiffen the chassis and eliminate flex as a tuning option for high bite surfaces. Package includes two side rails. COMPATIBILITY: Team Associated RC10 B7 OriginalTeam Associated RC10 B7D

Read more less

1UP Racing Blue O-Ring Grease Lubricant (3g) – 1UP120301 Maximize performance and minimize friction with 1UP Racing Blue O-Ring Grease. This 3g container of high-performance lubricant is ideal for serious racers who demand smoother suspension and leak-free differentials. Designed to reduce sliding friction, it delivers ultra-smooth shock feel and long-lasting protection for diff o-rings and seals. Features: Smooths shock operation with reduced sliding friction Ideal for diff o-rings and seals to help prevent leaks Long-lasting formula for consistent performance Perfect for serious racers and RC enthusiasts Includes: (1) 3g Container of Blue O-Ring Grease  

Read more less

1up Racing Pro Duty Equipment Case – Built for the Track, Ready for Anything 🔧 Protect your gear like a pro with the 1up Racing Pro Duty Equipment Case – the ultimate storage solution for racers who value durability, organization, and style. Whether you're hauling tools, electronics, or spare parts, this case is engineered to keep your essentials safe and scratch-free. 💼 Featuring a rigid outer shell, dense internal padding, and six customizable dividers, this case adapts to your setup with ease. Impact-absorbing foam on the top and bottom adds next-level protection, while the internal compartments and zippered pouch keep everything neat and accessible. ✨ Key Features: 🛡️ Heavy-Duty Shell with Dense Padding – Keeps your tools, chargers, and electronics safe📦 Adjustable Dividers – 6 foam inserts for a fully customizable interior layout🧵 Durable Black Fabric Interior – Clean, professional finish inside and out🧰 4 Tool Pouches + Zippered Pocket – Store scissors, pliers, leads, setup sheets, and more🧩 Impact-Absorbing Foam (Top & Bottom) – Superior protection during transport 📏 Dimensions: Interior Space: 23 x 20 x 7.5cm\ Dividers Included:✔️ (1) 23cm Divider✔️ (2) 12.5cm Dividers✔️ (3) 6.5cm Dividers 🎯 Built to Travel. Designed to Organize. Whether you're trackside or organizing your pit area at home, the 1up Racing Pro Duty Equipment Case keeps your essentials secure, accessible, and race-ready. 💡 Organize Like a Pro – Grab Your 1up Equipment Case Today!

Read more less

Pro-Motion 2.2" Rear Buggy Wheels (4)Available in White (3050-W) or Yellow (3060-Y) Engineered for Speed. Built to Dominate. Give your buggy the winning edge with Pro-Motion’s 2.2" Rear Wheels, designed for today's high-traction tracks. These wheels feature a reinforced inner rib structure for added durability without the weight penalty. The lightweight design and precision molding ensure a true, balanced rotation—exactly what you need for consistent traction and razor-sharp control. ✅ Fits most 1/10 scale buggies with 2.2" rear wheels✅ Lightweight inner rib design for enhanced strength✅ High-durability construction for racing abuse✅ Built-in vent holes reduce tire distortion✅ Available in sleek White or Fluorescent Yellow 📦 Includes:(4) 2.2" Rear Buggy Wheels 💡 Pro Tip: Match with Pro-Motion front wheels for a full performance setup that looks as good as it drives.

Read more less

Team Associated 12mm Blue Aluminum Shock Bushings (4) – Part 91816Precision Fit. Race-Proven Durability. The Team Associated 12mm Blue Aluminum Shock Bushings (91816) are high-quality replacements designed for enhanced suspension performance and long-lasting durability. Perfect for demanding race setups, these bushings are crafted from lightweight anodized aluminum to maintain alignment and reduce play in the shock mounting. ✅ Fits 12mm shock mount applications on select Team Associated vehicles✅ CNC-machined from high-grade aluminum for strength and precision✅ Anodized blue for a sleek, professional finish✅ Reduces slop and enhances suspension consistency✅ Upgraded alternative to plastic bushings 📦 Includes: (4) 12mm Blue Aluminum Shock Bushings Part #: 91816 💡 Pro Tip: Use with matching shock components for maximum suspension precision and race-level performance.

Read more less

Team Associated RC10B7 FT Ballstud Mount +2mm, Blue Aluminum – ASC92477 Precision Suspension Tuning for the RC10B7 The Factory Team +2mm Ballstud Mount is a premium upgrade for serious racers. Machined from lightweight aluminum and anodized in signature blue, this mount allows for fine-tuning of rear camber link geometry, improving handling and cornering stability on the track. ⚙️ Features: ✅ +2mm Height – Raises rear camber link mount for improved roll center adjustment ✅ CNC-Machined Aluminum – Durable and lightweight ✅ Blue Anodized Finish – Factory Team look and corrosion resistance ✅ Increased Setup Options – Perfect for dialing in rear-end grip and handling on high-traction surfaces 📦 Includes: (1) +2mm Blue Aluminum Ballstud Mount Mounting hardware ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 🏁 Ideal for racers looking to fine-tune rear suspension geometry for high-performance setups.

Read more less

Team Associated RC10B7 FT Rear Hub Set, HRC, Blue or Black – 92473 / 92474Upgrade your RC10B7 with Factory Team aluminum HRC rear hubs – engineered for strength, precision, and tunability on high-grip tracks. These anodized blue or black hubs feature a high roll center (HRC) design to enhance handling, increased axle height adjustability, and a secondary bearing bore for use with FT universals. Built tough for serious racers who want consistency lap after lap. ✔️ CNC Aluminum for max durability✔️ HRC Design boosts handling on high-traction surfaces✔️ Supports higher axle heights and lower ride heights✔️ Compatible with Factory Team Universals✔️ Anodized in Blue (92473) or Black (92474)✔️ Includes left & right hubs plus mounting hardware✔️ Fits: RC10B7 & RC10B7D Race harder. Corner faster. Stay planted. 🏁  

Read more less

Team Associated FT 3x27.5mm V2 Chrome Shock Shafts – ASC91620 Smooth, Durable, Factory-Grade Suspension Parts Upgrade or replace your V2 shocks with the Factory Team 3x27.5mm Chrome Shock Shafts, engineered for exceptional performance and longevity. Designed specifically for #91577 buggy rear and #91578 truck front shock bodies, these shafts provide a precise fit with a low-friction chrome finish. ⚙️ Features: ✅ Chrome-coated for reduced stiction and increased durability ✅ Designed for secure screw-mounted piston setup ✅ Factory Team precision for consistent shock action ✅ Ideal for competitive racing environments 📦 Includes: (2) 3x27.5mm V2 Chrome Shock Shafts ✅ Compatibility: #91577 – Buggy Rear Shock Bodies #91578 – Truck Front Shock Bodies Not compatible with E-clip piston systems 🏁 Factory Team quality that keeps your ride smooth and race-ready!

Read more less

Team Associated RC10B7 HD Gear Differential Outdrives (2) – Built Tough for Maximum Power Transfer! ⚙️ Maintain your RC10B7 or RC10B7D’s drivetrain strength with the Team Associated Factory Team HD Gear Differential Outdrives!These heavy-duty outdrives are designed to handle the intense loads of competitive racing, ensuring your buggy stays durable and consistent under extreme conditions. ✨ Key Features: ⚙️ Heavy-Duty Construction – Engineered to handle the rigors of intense 1/10 scale racing 🔧 Direct Replacement Design – Perfect fit for the Team Associated RC10B7 and B7D gear differentials 🏁 Improved Durability – Strengthens the drivetrain for better long-term performance 🛡️ Trusted Factory Team Quality – Race-proven reliability from Team Associated 📦 Includes: ✔ (2) Heavy-Duty Gear Differential Outdrives 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct fit for stock RC10B7 and B7D differentials.🔹 Ideal for racers looking to enhance drivetrain longevity and consistency under high loads. 🏁 Drive harder and push your limits with the Factory Team HD Gear Differential Outdrives! 🔥 Upgrade today for maximum durability on race day with Team Associated! 🔥  

Read more less

JConcepts S2 RC10B7 Clear Body w/ Wings (Standard Weight)📦 Includes Two Carpet / Turf / Dirt Wings Give your RC10B7 the competitive edge with the JConcepts S2 body — a low-drag, high-performance shell built for speed and agility on carpet, turf, and dirt tracks. Originally crafted for turf racing, the S2's aggressive styling and optimized aero features have made it a favorite among serious racers. 🔧 Features: 🔹 Designed for the Team Associated RC10B7 🔹 Original JConcepts S2 low-profile styling 🔹 Tight profile hugs the chassis outline 🔹 Dual window, forward cab placement for improved steering response 🔹 Rear sidepod scoops for optional airflow or added downforce 🔹 Recessed scoop on hood can be trimmed for cooling 🔹 Center fin improves high-speed tracking 🔹 Covers spur gear guard for added protection 🔹 Clear polycarbonate with protective film (standard weight) 🔹 Includes window masks & detailed decal sheet 🏁 Includes: (1) S2 Clear Body (Standard Thickness) (2) 6.5" Carpet / Turf / Dirt Wings (1) Window Mask Set (1) JConcepts Decal Sheet 🛠️ Body requires trimming and painting. Compatible with RC10B7 only.

Read more less

🔧 Quick-Access Body and Battery RetentionThe Team Associated B6 Thumbscrews are genuine replacement parts designed for the RC10 B6 and B6D buggies. These thumbscrews provide a secure and tool-free solution for fastening body mounts or battery straps — making maintenance and adjustments faster than ever. ⚙️ About the Thumbscrews Constructed from durable composite material with precision-molded threads, these thumbscrews ensure a tight and reliable hold while allowing easy removal by hand. Whether you’re making quick pit adjustments or swapping batteries between heats, these are a must-have for convenience and performance. 🌟 Features Direct replacement for RC10 B6 and B6D thumbscrews Tool-free installation and removal Durable composite construction for long life Provides secure hold for battery straps or body mounts Designed for quick pit adjustments Includes: (2) Team Associated B6 Thumbscrews Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D & more 🧰 Simple, strong, and efficient — these thumbscrews keep your buggy race-ready with no tools required.  

Read more less

Upgrade your gear differential with this Factory Team aluminum diff cover for the RC10B6.1. Designed for maximum durability and precision, this machined aluminum cover adds strength to the gear diff case and helps reduce flex under load—ideal for high-power setups and serious racers. 🔥 Key Features: Precision CNC-machined aluminum construction Factory Team performance part for racing applications Provides added rigidity and improved seal pressure Hard-anodized finish for long-lasting durability Direct replacement for the stock plastic gear diff cover ✅ Compatibility: RC10B6.1 RC10B6.1D RC10B6.2 / B6.3 series (compatible gear diff cases) May also fit other Team Associated models using the same gear diff design 📦 Includes: (1) Aluminum Gear Diff Cover ⚠️ Tip:For best results, use with Team Associated Factory Team gear diff components and premium diff fluid.

Read more less

Dial in your gearing with the XRAY Composite 3-Pad Slipper Clutch Spur Gears. Precision-molded from a special composite material, these spur gears deliver durability, smooth operation, and consistent performance. Available Tooth Counts (48 Pitch): 72T – Part #365872 75T – Part #365875 78T – Part #365878 81T – Part #365881 84T – Part #365884 Features: Lightweight yet durable composite construction Designed specifically for the XRAY 3-Pad Slipper Clutch System Provides smooth power transfer and quiet operation Wide range of sizes lets you fine-tune gearing for track conditions and motor setup Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) Other XRAY models using the 3-Pad Slipper Clutch System (check your manual)      

Read more less

Take your steering precision to the next level with the XRAY Aluminum Steering Plate Set, designed specifically for the 1-piece chassis. Machined from premium Swiss 7075 T6 aluminum, this set ensures maximum strength, rigidity, and durability under the toughest racing conditions. Features: Swiss 7075 T6 aluminum construction for ultimate durability Black anodized finish with XRAY laser engraving Reinforces the steering system for consistent, precise handling Direct fit for XRAY’s 1-piece chassis design Perfect upgrade for racers demanding maximum performance Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (1) Aluminum Steering Plate Set

Read more less

Upgrade your XB2/XT2 with the XRAY Aluminum Steering Arm set, precision-machined from Swiss 7075 T6 aluminum for maximum strength and durability. Designed specifically for use with the 1-piece chassis, these arms deliver consistent, slop-free steering performance. Features: CNC-machined Swiss 7075 T6 aluminum Black anodized finish for style and protection Provides ultra-precise steering feel Direct fit for XRAY 1-piece chassis design Includes left and right aluminum arms (2) Compatibility: XRAY XB2 (’21 onwards with 1-piece chassis) XRAY XT2 (’21 onwards with 1-piece chassis) Includes: (2) Aluminum Steering Arms

Read more less

Fine-tune your front-end geometry with this Spindle Trail Insert Set from Team Losi Racing. Designed for precision handling adjustments, this set includes four of each: 2mm, 3mm, and 4mm inserts—perfect for dialing in the feel you want on the track. ✅ Includes:• (4) 2mm Inserts• (4) 3mm Inserts• (4) 4mm Inserts Compatible with select TLR 22-series models. A must-have for racers chasing the perfect setup!

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

The Team Associated Factory Team B6 19mm Octalock LCF Slipper Pad is compatible with the Octalock spur gears. This design was debuted with the RC10B74.1 buggy, and are a great way to upgrade the transmission in your B4/B5/B6 series buggy or truck.  

Read more less

1up Racing Pro-RX FH5 2.4GHz Receiver – Elite Sanwa Compatibility Without the Cost 💥 Take your control to the next level with the 1up Racing Pro-RX FH5 — a precision-engineered 2.4GHz receiver that delivers elite-level responsiveness and reliability at a price that leaves the competition in the dust. 🏁 Designed to work seamlessly with Sanwa FH5 & FH5U protocols, this compact, antenna-free unit is a favorite among our 1up Factory Drivers. Rigorously tested for top-tier performance, the Pro-RX FH5 brings premium features to your pit table — without the premium price. ✨ Key Features: 🔗 FH5 & FH5U Protocol Compatible – Drop-in ready for your Sanwa M17, MT-5, or MT-R📡 4 Channels – Versatile setup options for steering, throttle, and more⚡ Lightweight & Compact – Only 6.8g, perfect for race builds where every gram counts🔋 Wide Voltage Range – Operates from 3.5V to 8.4V🧰 No Tools Needed – Plug-and-play with included bind plug and protective foam case🚫 Antenna-Free – Clean look and easy install (note: reduced range vs. external antenna units) 📦 What’s in the Box? ✔️ (1) 1up Racing Pro-RX FH5 Receiver✔️ (1) Instruction Manual✔️ (1) Foam-Lined Storage Case✔️ (1) Bind Plug 🔧 Specifications: Compatibility: Sanwa FH5 / FH5U (M17, MT-5, MT-R) Channels: 4 Voltage Input: 3.5–8.4V Dimensions: 28 x 20.5 x 18.5mm Weight: 6.8g 📌 Tech Note: While compact and antenna-free for convenience, this receiver has shorter range than traditional receivers with external antennas. For extended range applications, we recommend the standard Pro-RX model. 🏆 Sanwa-Ready, Race Proven When milliseconds matter, trust the receiver that racers rely on. Get elite FH5 performance without breaking the bank. 💡 Upgrade Smarter – Run the 1up Pro-RX FH5 Today!

Read more less

Pro-Motion 2.2" 2WD Front Slim Carpet Buggy Wheels (4)Available in Yellow (3080-Y) or White (3070-W) Precision on the Carpet. Built for Grip. Dial in your buggy for high-traction carpet tracks with Pro-Motion’s 2.2" Slim Front Wheels. These lightweight wheels are engineered with a reinforced inner rib design to reduce flex without adding unnecessary weight. The tough plastic construction holds up under pressure, while integrated vent holes keep performance sharp through long mains. ✅ Perfect fit for 2WD front carpet setups✅ Slim profile design tailored for high-grip surfaces✅ Ultra-lightweight ribbed structure for strength without bulk✅ Built-in vent holes reduce tire ballooning✅ Available in bright Fluorescent Yellow or Clean White✅ Includes 12mm hex mounting 📦 Includes:(4) 2.2" Slim Front Carpet Buggy Wheels (choose Yellow or White) 💡 Pro Tip: Pair with low-profile carpet tires for the ultimate precision and responsiveness on tight indoor layouts.

Read more less

Team Associated 7.8x1.0mm Aluminum Bulkhead Ball Stud Washers – Blue (10) – Part 31385Wider Support. Precision Shimming. Race-Ready Tuning. The Team Associated 7.8x1.0mm Blue Aluminum Ball Stud Washers (31385) are ideal for bulkhead and arm mount shimming in both on-road and off-road 1/10 scale vehicles. With a larger outer diameter, these washers provide more surface area, perfect for critical suspension points where strength and consistency matter. ✅ Pack of 10 precision washers✅ 7.8mm outer diameter / 1.0mm thickness✅ Anodized blue aluminum – lightweight and durable✅ Ideal for bulkhead, arm mount, and ball stud adjustments✅ Common in off-road and on-road setups alike✅ Perfect fit for 1/10 scale race platforms 📦 Includes: (10) 7.8x1.0mm Blue Aluminum Ball Stud Washers Part #: 31385 💡 Pro Tip: Use these in areas where added washer surface area can prevent flex or part deformation over time.

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/6000mAh) – 140C Burst Race-Ready Power. Expanded Runtime. Shorty Format. Push your limits with the Gens Ace Redline 2.0 6000mAh LiHV Shorty — a premium high-discharge racing battery built for domination. Engineered with Silicon Graphene technology, this pack delivers stable voltage, a flatter discharge curve, and long-term cycle performance — all in a low-profile shorty size perfect for 1/10 scale competitive setups. ⚙️ Features: ⚡ 140C Continuous Discharge – massive power delivery for serious racers 🔋 7.6V LiHV / 6000mAh Capacity – extended runtime and high-voltage performance 🔌 5mm Bullet Connectors – high-amp, secure connectivity 🪶 Shorty LCG Design – optimized for low center of gravity setups 🔬 Factory-matched cells for superior balance and reliability 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 6000mAh Continuous Discharge: 140C Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 47 x 25mm Weight: 220g (7.76oz) 🏁 For racers needing a perfect blend of raw power, extended runtime, and reliable heat management, the Gens Ace Redline 2.0 6000mAh Shorty delivers. Built for the podium.

Read more less

JConcepts F2 Lightweight Body for XRAY XB2 2024 – Includes Two 6.5" Wings🏁 Lighten Up and Stay Fast – Proven Aero for High-Grip Racing The JConcepts F2 lightweight body for the XRAY XB2 2024 is built for serious racers looking to reduce weight and gain responsiveness on high-bite surfaces like turf, carpet, and polished clay. Based on the same winning layout as the standard F2, this lightweight version trims the fat while keeping all the performance you expect from a JConcepts shell. Featuring the signature forward cab bias, dual rear windows, and Finnisher "V" side-pod design, the F2 body offers maximum downforce, clean airflow, and high-speed stability. The slim profile hugs the XB2 2024 chassis perfectly, with built-in clearance for spur gear guards and space for electronics and wiring. ✨ Key Features: Direct fit for the XRAY XB2 2024 platform Clear lightweight polycarbonate for reduced weight and snappier handling Original JConcepts F2 profile with aggressive styling and aero balance Dual step side-pods and cab-forward layout for optimal steering response Includes (2) 6.5" Carpet | Turf | Dirt Wings Spur gear guard clearance molded into the body Comes with window masks and full decal sheet 📦 Includes: (1) F2 Clear Lightweight Body for XRAY XB2 2024 (2) 6.5" Wings (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Painted body shown for illustrative purposes only. Product ships clear and untrimmed. Compatibility: XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt

Read more less

JConcepts XRAY XB2 2024 "S15" Lightweight Clear Buggy Body w/Two Wings Premium Lightweight Option for Maximum Performance Dominate the track with the lightweight version of the JConcepts "S15" Buggy Body, precision-molded for the XRAY XB2 2024 Carpet and Dirt platforms. This body features the same aerodynamic enhancements and aggressive styling as the standard S15 — now in a thinner polycarbonate for reduced weight and sharper handling. Mid-body winglets, a cockpit shark fin, and a raised rear profile give your buggy the downforce, stability, and fitment needed to perform at its peak. Ideal for racers chasing every last tenth of a second, the lightweight S15 is a go-to choice for competitive events where agility and response matter most. ✨ Features: 💨 Lightweight Polycarbonate Construction – Reduces overall weight for quicker response and better rotation 🧭 Forward Cab Bias – Enhances steering feel and directional control 🛡️ Mid-Body Winglets & Stabilizer Kick-Up – Adds side bite and rear grip 🦈 Cockpit Shark Fin – Improves high-speed stability and structural integrity 🧰 Raised Rear Side-Pods – Fits tall shorty packs or saddle pack layout ✂️ Includes Window Mask & Decal Sheet 📦 Includes: ✔ (1) Lightweight Clear S15 Body for XRAY XB2 2024✔ (2) Rear Wings✔ (1) Window Mask Sheet✔ (1) JConcepts Decal Sheet ✅ Compatibility: XRAY XB2 2024 Carpet Edition XRAY XB2 2024 Dirt Edition 🖌️ Note: Body comes clear and unpainted. Painted image is for reference only.

Read more less

JConcepts XRAY XB2 2024 "S15" Clear Buggy Body w/Two Wings High-Performance Shell for Elite-Level Racing Give your XRAY XB2 2024 the competitive edge with the JConcepts "S15" Buggy Body. Designed with precision for both the Carpet and Dirt versions of the XB2 2024, the S15 body blends aggressive styling with aerodynamic refinement for maximum performance. Mid-body winglets, a rear stabilizer kick-up, and the iconic “shark fin” cockpit spine enhance stability, steering response, and on-track handling. Whether you're running a tall shorty or the recommended saddle pack layout, the revised side-pods ensure proper clearance and a clean fit. Molded from clear polycarbonate, the S15 is ready for your paint scheme and includes everything you need to finish it off with professional results. ✨ Features: 💨 S15 Styling – Based on the popular Silencer body, tuned for XB2 2024 layout 🧭 Forward Cab Bias – Improves steering and directional stability 🛡️ Mid-Body Winglets – Add downforce and side bite for increased grip 🦈 Cockpit Shark Fin – Enhances high-speed tracking and body rigidity 🔧 Raised Rear Side-Pods – Accommodates multiple battery layouts 🪶 Available in Regular & Lightweight Versions (this version is standard) ✂️ Includes Window Mask & Decal Sheet 📦 Includes: ✔ (1) Clear S15 Body for XRAY XB2 2024✔ (2) Rear Wings✔ (1) Window Mask Sheet✔ (1) JConcepts Decal Sheet ✅ Compatibility: XRAY XB2 2024 Carpet Edition XRAY XB2 2024 Dirt Edition 🖌️ Note: Body comes clear and unpainted. Painted body shown for illustration purposes only.

Read more less

Hobbywing Low-Impedance Capacitor Modules are designed to improve power delivery, reduce ripple, stabilize ESC performance, and protect sensitive electronics during high-load acceleration and braking. These capacitor modules help reduce RF noise, maintain lower operating temperatures, and provide a smoother, more responsive feel on the track. Each module is tailored for specific Hobbywing ESC platforms, ranging from 1/10 Stock Spec systems to full 1/8 racing setups. This chart makes it easy to match the correct capacitor module to your ESC. Available Capacitor Modules MODULE-F – Part #30840007 Scale: Standard 1/10 Use With: Stock Spec, Justock, QuicRun 10BL60 SD Specification: 470uF / 20V × 1 capacitor MODULE-D – Part #86030030 Scale: Standard 1/10 Use With: XeRun XR10, QuicRun 10BL60 Sensored G2 Specification: 560uF / 20V × 2 capacitors MODULE-A – Part #86030000 Scale: Upgrade 1/10 Use With: XeRun XR10 Pro XeRun XR10 Stock Spec XeRun 120A V3.1 / V2.1 XStock QuicRun 10BL60 Sensored Specification: 470uF / 20V × 4 capacitors MODULE-E – Part #30840000 Scale: Standard 1/8 Use With: XeRun XR8 Plus G2S EzRun MAX8 G2S EzRun MAX10 G2 QuicRun WP 8BL150 G2 QuicRun WP 10BL120 G2 XeRun XR8 Pro G3 Specification: 470uF / 35V × 4 capacitors MODULE-B – Part #30840008 Scale: Standard 1/10 Use With: XeRun XR10 Stock Spec G2 Specification: 1000uF / 16V × 3 capacitors MODULE-C – Part #30840009 Scale: Standard 1/10 Use With: XeRun XD10, XeRun XR10 Pro Specification: 560uF / 20V × 3 capacitors MODULE-C Upgrade – Part #30840011 Scale: Upgrade 1/10 Use With: XeRun XD10, XeRun XR10 Pro Specification: 1000uF / 16V × 3 capacitors MODULE-D Upgrade – Part #30840010 Scale: Upgrade 1/10 Use With: XeRun XR10 Pro Specification: 1000uF / 16V × 2 capacitors Why Use a Hobbywing Capacitor Module? Reduces voltage ripple and electrical noise Improves throttle punch and braking consistency Keeps ESC temps lower under heavy load Helps protect ESC MOSFETs during rapid switching Provides cleaner overall power delivery

Read more less

Upgrade your front end with precision, strength, and expanded tuning capability. Weighing just 10.9 grams, this aluminum R1WURKS B7 Front Ball Stud Mount is lighter than the stock plastic piece and adds two in-between ball stud positions for finer camber-link tuning. It also accepts the optional 10g internal weight for racers who want added front-end stability (sold separately). Features Skeletonized design for optimal strength-to-weight balance 0.6g lighter than the stock plastic mount High-strength 7075-T6 aluminum construction Precision CNC-machined for exact fit and alignment Matte black anodized finish with laser-etched R1 branding Two additional in-between camber link mounting holes Compatible with optional 10g internal weight Includes (1) R1WURKS B7 Front Ball Stud Mount, Aluminum Fitment B7 B7D T7 SC7 For best results, apply low-strength blue thread locker to all screws and tighten until snug. Avoid overtightening.

Read more less

Dial in your aero and add a clean, pro finish to your 1/10 RC build with BOOF RC Wing Washers.These lightweight aluminum washers reinforce your wing mounting points, preventing cracks, pull-through, and premature wear — especially on high-downforce setups. Designed for racers who want performance, durability, and style without paying premium brand prices. Features: ✔️ Lightweight Aluminum Construction – Strong and low-mass for optimal wing support ✔️ Reduces Wing Damage – Prevents cracking and screw pull-through ✔️ CNC Machined Finish – Clean fitment with a premium look ✔️ Multiple Color Options – Customize your style ✔️ Easy Bolt-On Upgrade – Works with standard 1/10 wing hardware Specs: Fitment: 1/10 RC (buggy, touring, drift, basher) Material: Aluminum Hardware: M3 mounting compatible Pack: 2pcs (one pair) Available Colors: 🟥 Red⬛ Black🩶 Titanium🟦 Royal Blue🩵 Light Blue 🟩 Green🟪 Purple⭐ Gold🤍 Silver (Availability may vary) In the Pack: (2) BOOF RC Aluminum Wing Washers Perfect For: 1/10 Buggies 1/10 Touring & Drift High-downforce setups Bashers that break wings often Why BOOF RC? Affordable, clean, functional upgrades — without the silly markup.  

Read more less