Limitless Carpet: 2WD MOD Buggy
-
Team Associated 5.5x2.0mm Aluminum Ball Stud Washers – Blue (10) – Part 31383
Team Associated 5.5x2.0mm Aluminum Ball Stud Washers – Blue (10) – Part 31383Stack Smart. Tune Precisely. Perform Better. The Team Associated 5.5x2.0mm Blue Aluminum Ball Stud Washers (31383) are essential for precise suspension tuning on your 1/10 scale vehicles. With a clean anodized finish and a small outside diameter, these washers are commonly used in on-road applications but work perfectly for off-road as well. ✅ Pack of 10 lightweight aluminum washers✅ 5.5mm outer diameter / 2.0mm thickness✅ Blue anodized finish – clean, race-inspired appearance✅ Perfect for adjusting ball stud height, roll center, and link angles✅ Ideal for both on-road and off-road 1/10 scale platforms 📦 Includes: (10) 5.5x2.0mm Blue Aluminum Ball Stud Washers Part #: 31383 💡 Pro Tip: Mix with other thicknesses to fine-tune geometry without over-adjusting a single point.
$15.23
-
Team Associated B6 Bumper Set (91685)
Team Associated B6 Bumper Set (91685)Keep your RC10 B6 or B6D protected with this genuine Team Associated replacement bumper set. Whether you're replacing worn parts or upgrading your buggy's durability, this set has you covered with both front and rear bumpers included. Includes: (1) Front Bumper (1) Rear Bumper Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D
$9.13
-
Team Associated 13mm Shock Rebuild Kit (B6.4/B6.4D) 91996
Keep your suspension performing at its best with the Team Associated 13mm Shock Rebuild Kit. Designed specifically for the B6.4 and B6.4D, this kit includes the essential O-rings and plastic bushings needed to refresh four shocks, restoring smooth, consistent performance on the track. Whether you're doing preventative maintenance or reacting to wear, this factory replacement kit ensures a proper fit and reliable sealing for optimal shock operation. 🛠️ Features Genuine Team Associated replacement parts Restores smooth and consistent shock performance Designed for 13mm shocks Fits Team Associated B6.4 / B6.4D platforms Enough components to service four shocks 📦 Includes O-rings (for four shocks) Plastic bushings (for four shocks) 🔧 Compatibility Team Associated B6.4 Team Associated B6.4D
$21.33
-
JConcepts Pin Swag 2.2" 2WD Slim Front Buggy Tires (2) (Pink Compound) SKU: JCO3181-010
Take your carpet and turf racing to the next level with the JConcepts Pin Swag 2.2" 2WD Slim Front Tires, engineered for razor-sharp steering and consistent forward bite. These innovative tires combine the proven outer lugs of the Swagger with a dense array of precision pins to deliver unmatched control, stability, and wear balance on today’s high-traction tracks. The unique “Pin + Swag” hybrid tread pattern features a split-center design for flexible surface adaptation and a staggered section that transitions power smoothly through corners. With a low-profile carcass for responsive handling and scalloped tire beads to cut weight, these front tires are the go-to choice for serious 1/10 racers seeking precision steering on high-grip carpet or turf. ⚙️ Features: JConcepts original Pin + Swag hybrid tread design for optimal front-end grip and balance Low-profile carcass layout improves stability and cornering precision Split-center pattern enhances surface conformity and steering smoothness Hefty base pins with sharp edges maximize bite and minimize wear Dense tread layout for even contact and consistent performance Ultra-light scalloped tire beads reduce rotating mass Ideal for EOS-style carpet and astro/turf tracks Pink compound optimized for high-traction racing 📏 Specifications: Part Number: 3181-010 Scale: 1/10 Position: Front (2WD Buggy) Compound: Pink (Carpet/Turf) Wheel Diameter: 2.2" Quantity: 2 Tires 📦 Includes: (2) JConcepts Pin Swag 2.2" 2WD Slim Front Tires
$25.91
-
Team Associated B6.1/B6.1D Gear Differential Outdrives [91785]
Team Associated B6.1/B6.1D Gear Differential Outdrives [91785] 🔩 Smooth power transfer starts here! These Team Associated Gear Differential Outdrives are the perfect replacement for your B6.1 or B6.1D buggy. Precision-machined and durable, they’re ready to handle race-day abuse while keeping your diff performing like new. ✅ Direct fit for B6.1 and B6.1D gear differentials✅ Includes outdrives and pins for a complete refresh✅ Built tough for consistent, long-lasting performance Includes:(2) Gear Diff Outdrives(2) Outdrive Pins 📦 Part Number: 91785🏁 Brand: Team Associated
$22.02
-
Team Associated 3-Gear Gearbox Conversion Kit – 71220
Refined torque. Tuned traction. Proven performance.The Team Associated RC10B7 3-Gear Gearbox Conversion Kit delivers a race-focused drivetrain upgrade that lets you fine-tune your buggy’s handling and power delivery. Designed for the RC10B7 and RC10B7D, and also compatible with T7 and SC7 platforms, this 3-gear layout alters torque transfer for a smoother, more balanced launch and enhanced rear-end stability. Perfect for racers chasing the edge on high-traction surfaces or looking to dial in rotation on tight tracks, the 3-gear conversion gives you the flexibility to tailor your drivetrain to your driving style. ⚙️ Features Performance-oriented 3-gear gearbox design Optimized torque response for improved traction and balance Includes notched differential height inserts for precise tuning Durable 54T idler gear with hardened idler shaft Factory-fit bearings and hardware for smooth installation CNC-machined aluminum arm mount (C) included Comprehensive kit with all mounting hardware and manual Designed for consistent durability and easy maintenance 📦 Includes (2) 3-Gear Gearbox Halves (4) Notched Differential Height Inserts (1) 54T Idler Gear (1) Idler Shaft (2) 10×15×4 mm Bearings (1) Aluminum Arm Mount (C) Full Hardware Set 3-Gear Conversion Manual ✅ Compatibility Team Associated RC10B7 / RC10B7D Team Associated T7 / SC7
$83.85
-
Team Associated RC10B6 FT Aluminum Bulkhead, 10g (Part #91658)
Add front-end strength and forward weight bias with this 10g Factory Team aluminum bulkhead for the RC10B6 series. Machined from high-quality aluminum and anodized for durability, it’s the perfect upgrade for racers seeking improved handling on high-traction tracks. 🔥 Key Features: CNC-machined aluminum construction for added strength Weighs 10 grams to shift weight forward for better cornering Factory Team part for pro-level durability and performance Hard-anodized finish resists wear and corrosion Direct fit replacement for the stock plastic bulkhead ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 RC10B6D / B6.1D / B6.2D / B6.3D May also fit SC6 and T6 series vehicles with shared front-end geometry 📦 Includes: (1) 10g Aluminum Front Bulkhead ⚠️ Tip:Consider pairing with additional brass or aluminum weight tuning components for a fully balanced setup.
$39.63
-
Team Losi Racing Team Foam Pit Mat | TLR70007
The Team Losi Racing Foam Pit Mat provides a large, stable, and protective workspace for racers who take their pit setup seriously. Designed for trackside and bench use, this mat helps protect your vehicle, tools, and work surface while giving you plenty of room to work comfortably. Constructed from durable foam, the mat cushions your RC car during maintenance and reduces the chance of parts rolling away. Finished in black with a bold TLR Team Losi Racing logo in yellow, it delivers a clean, professional look that fits perfectly in any race pit or workshop. Features Large foam pit mat for RC maintenance and setup Provides a stable, cushioned work surface Helps protect vehicles, tools, and tables Reduces parts movement while wrenching Bold Team Losi Racing logo for a pro pit appearance Specifications Width: 68 in (172 cm) Length: 22 in (559 mm) Color: Black with Yellow TLR Logo Includes (1) Team Losi Racing Foam Pit Mat A must-have addition for any racer looking to level up their pit area with a clean, professional, and functional work surface.
$42.68
-
Team Associated 13mm Front Shock Spring (Purple/4.6lbs) (44mm) - 91946
Team Associated 13mm Front Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes Shock Spring Characteristic Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D
$15.23
-
TQ Wire Flatwire Sensor Cable
This is a TQ Wire Flatwire Sensor Cable. TQ “Flatwire” sensor cables are constructed from soft black PVC insulated wire with high quality crimping at the connector for greater durability. They are slightly stiffer than the standard TQ silicone sensor cables, but provide a cleaner look and neat wire “management”. Choose from a variety of lengths to best suit your application.
$10.66
-
JConcepts Swaggers Carpet 2.2" 2WD Front Buggy Tires (Pink) 3137-010
Dial in your carpet setup with JConcepts Swaggers 2.2" Front Buggy Tires. These tires feature a low-profile carcass and angular ribs in multiple heights for maximum corner speed, razor-sharp tracking, and consistency on high-grip carpet or astro tracks. Designed for slim 2WD front wheels (JCO3376W or JCO3376Y), the Swagger’s pink medium-soft compound offers excellent wear while staying fast and easy to drive. 🏁 No insert required. Features:• Precision fit and finish from JConcepts• Offset angular rib design for enhanced cornering• Low-profile carcass for sharp response• Pink compound optimized for carpet and astro• No insert required
$22.87
-
Team Associated RC10B7 Hinge Pin Set 92496
Team Associated RC10B7 Hinge Pin Set Part Number: ASC92496 Keep your suspension smooth and secure with the Team Associated RC10B7 Hinge Pin Set. This replacement set includes all necessary hinge pins for the RC10B7 platform, ensuring your vehicle maintains proper alignment and performance during high-stress racing conditions. ✅ Features: Direct replacement for the Team Associated RC10B7 Precision machined for smooth suspension operation Includes full set of hinge pins for the front and rear Durable construction for long-lasting performance 📦 Includes: (1) Complete hinge pin set for RC10B7 🚗 Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D
$18.28
-
Team Associated RC10B74 Aluminum Rear Hub Link Mount (2) 92180
Upgrade durability and precision with the Team Associated Aluminum Rear Hub Link Mount Set. Designed as a direct replacement for multiple Team Associated platforms, these aluminum mounts provide increased strength and more consistent suspension performance compared to stock components. Perfect for racers looking to improve reliability and maintain precise rear-end geometry under demanding conditions. ⚙️ Stronger, More Consistent Performance Constructed from high-quality aluminum, these rear hub link mounts help: Reduce flex under loadMaintain consistent suspension geometryImprove durability in high-impact situations Ideal for both racing and high-traction surfaces where precision matters. 🏁 Race-Ready Upgrade Whether you're replacing worn parts or upgrading for performance, these mounts deliver tight tolerances and long-lasting reliability to keep your car dialed in. ⚡ FeaturesGenuine Team Associated replacement/upgrade partDurable aluminum constructionImproves rear suspension consistencyReduces flex compared to stock partsDirect fit for multiple Team Associated platforms📦 Includes(2) Aluminum Rear Hub Link Mounts🔧 CompatibilityRC10B74RC10B74.1 / B74.1DRC10B74.2 / B74.2D / B74.2 CERC10 SC6.2RC10 T6.2RC10B6.2 / B6.2DRC10B6.3 / B6.3DRC10B6.4 / B6.4D A solid upgrade for racers looking to increase durability and keep rear suspension geometry consistent under race conditions.
$25.91
-
JConcepts Carpet/Astro High-Clearance 7" Rear Wing – JCO0501
The JConcepts Carpet/Astro High-Clearance 7" Rear Wing is engineered specifically for modern carpet and AstroTurf racing conditions. Featuring a short-chord design for quick rotation and a flat base for increased tire clearance, this wing delivers the balance racers want between downforce and low drag on high-speed layouts. Built from durable material, the wing includes clipped rear corners to improve rigidity and reduce breakage, along with a traditional rear trim-line to fine-tune aerodynamic balance. Large radius cut-outs in the side dams allow for greater rear tire expansion and flex, while dual stability fangs reinforce the structure from front to rear. Maintaining a high-angle vertical rear dam, the HCW provides predictable handling and confidence through fast sections. Multiple cut lines allow racers to customize trim and feel, making this wing one of the most tunable aerodynamic options for 1/10 off-road racing. Features Innovative 7" High-Clearance Wing (HCW) design Short-chord profile for quicker rotation Flat base increases rear tire clearance Clipped rear corners minimize breakage Large side-dam openings for tire expansion and flex Dual stability fangs for added structural strength Pro-level height and rake angle Designed for carpet & AstroTurf racing Compatibility Fits most 1/10 scale off-road buggies Includes (2) JConcepts Carpet/Astro High-Clearance 7" Rear Wings
$19.81
-
Team Associated 48P Brushless Spur Gear (69T / 72T / 75T) – 9648 / 9649 / 9650
Dial in your drivetrain with Team Associated’s 48 Pitch Brushless Spur Gears. Designed for smooth power transfer and durability under brushless systems, these precision-molded gears give you the tuning options you need for different track conditions. Features: High-strength composite construction 48 pitch, optimized for brushless motors Available in multiple tooth counts for gearing flexibility Perfect balance of durability and efficiency Available Sizes (each sold separately): 69T (Part #9648) 72T (Part #9649) 75T (Part #9650) Compatibility: RC10B6 / B6D RC10B6.1 / B6.1D RC10B6.2 / B6.2D RC10B6.3 / B6.3D RC10B6.4 / B6.4D And other Team Associated 1/10 buggies using 48P gears
$9.15
-
Team Associated B6 Wing/Body Mount Part Number: 91718
Direct-fit replacement for a range of B6-series buggies — essential for clean body and wing attachment. Upgrade or replace your worn mount with this OEM composite Wing/Body Mount for the RC10 B6 chassis line. The kit includes everything needed to properly secure both wing and body to your buggy. Includes: (1) Left Wing Brace (1) Right Wing Brace (1) Shim Plate (2) Wing Mount Buttons Key Features: Precision-molded composite for durability and reliable attachment Factory-style fit for consistent mounting and race-ready stiffness Optionally compatible with Team Associated Factory Team Aluminum Wing Mount (ASC91903) for racer upgrades Compatibility – What Fits Buggy Series Specific Models B6 Series RC10 B6, B6 Club Racer, B6D B6.1 Series B6.1, B6.1 Factory Lite, B6.1D, B6.1DL B6.2 Series B6.2, B6.2D B6.3 Series B6.3, B6.3D B6.4 Series B6.4, B6.4D Extended Chassis RC10 B64, B64 Club Racer, B64D T6 Variants RC10 T6.1, T6.2 SC6 Models SC6.1 Why It’s a Must-Have: Prevents body and wing movement during hard cornering or crashes Convenient replacement when original part wears or cracks Compatible across multiple mod cycles of the B6 platform — simplifies spare inventory!
$12.18
-
Team Losi Racing 48P Direct Drive Spur Gear (69T, 72T, or 75T)
📏 Fine-Tune Your Gear Ratio for Maximum 17.5 Power!The TLR 48 Pitch Direct Drive Spur Gears are precision-engineered for the TLR Direct Drive System (TLR332043), giving you ultimate control over your gearing setup. Whether you need more top-end speed or quicker acceleration, choose from 69T, 72T, or 75T options to match your track conditions and dial in your 17.5 stock setup like a pro. 🔧 Features: Designed specifically for the TLR Direct Drive System (TLR332043) Available in multiple tooth counts for perfect gearing: 69T, 72T, or 75T Precision-molded for smooth, quiet operation Ideal for 17.5 stock class racing 🏁 Optimize. Adapt. Win.These spurs help extract every ounce of performance when you're chasing podiums. Don't just race—race smart with the right spur gear. ✅ Note:The 69T and 75T spurs are included with TLR332043 but are also sold individually here for replacements or spares.
$15.23
-
JConcepts Fuzz Bite Wide 2.2" 2WD Front Buggy Carpet Tires (Pink) 4061-010
Dominate the carpet with JConcepts' Fuzz Bite Wide front tires—built for precision, steering response, and longevity. The wide-body, low-profile design delivers quick transitions and reduced roll, while the reverse “water tower” pin layout grips tight in high-traction conditions. Engineered for elite-level performance on tight-knit turf or CRC-style carpeting. Features:• Low-profile, wide-body carcass for improved stability• Reverse “water tower” pins for precision grip• Radius-positioned pins deliver consistent traction• Directional sidewall lugs for steering response• Lightweight scalloped tire beads reduce unsprung weight• Includes two scalloped foam inserts
$26.30
-
Team Associated RC10B6 Pre-Cut 7" Wide Buggy Wing – ASC91998
Team Associated RC10B6 Pre-Cut 7" Wide Buggy Wing – ASC91998 Increased Downforce & Stability for 1/10 Buggies Upgrade your RC10B6 with this pre-cut 7" wide buggy wing and experience enhanced high-speed cornering and rear stability. Designed to deliver more downforce than the standard 6.5" wing, this wider version excels on low grip tracks and sweeping turns. ⚙️ Features: ✅ 7" Width – More surface area for increased rear downforce ✅ Pre-Cut Design – Ready to mount, no trimming needed ✅ Improved Stability – Optimized for high-speed turns and loose surfaces ✅ Durable Lexan Material – Lightweight and race-proven 📦 Includes: (1) Clear Pre-Cut 7" Wing ✅ Compatibility: Team Associated RC10B6 May fit other 1/10 buggies requiring a 7" wing (modification may be needed) 🛠 A great tuning aid for racers looking to boost corner speed and traction on loose or high-speed layouts.
$21.33
-
Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shaft (2) - 91618
Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shaft Smooth Performance. Race Proven. Upgrade your front suspension with the Team Associated 3x23mm V2 Chrome Screw Mount Front Shock Shafts. Designed for precision and durability, these chrome-coated shafts reduce friction and wear for smooth, consistent shock action. Perfect for racers running the B6 and B64D platforms, these shafts are a direct replacement and include the required mounting hardware for a hassle-free install. 🔩 Features: 🔧 V2 Chrome Finish – Reduces friction and enhances shock performance 🛠️ Screw Mount Design – Reliable and secure installation 🚗 Vehicle Compatibility – Fits Team Associated B6 and B64D models 📦 Complete Kit – Includes two shock shafts and mounting hardware 📦 Includes: (2) 3x23mm V2 Chrome Screw Mount Front Shock Shafts (1) Mounting Hardware Set Keep your suspension running smooth and race-ready—upgrade to Team Associated quality.
$25.91
-
Team Associated RC10B6.4 Front Wing Mount, Fan Mounts & Battery Brace Shim Set – Part #91978
Fine-tune your RC10B6.4 with this comprehensive tuning and hardware set from Team Associated. The #91978 Factory Team accessory pack includes everything needed to install a front wing, fan mounts, and adjust your battery brace height—all in one convenient kit. 📦 Includes: (1) Front Wing Mount (2) Fan Mounts (1) Battery Brace Shim Necessary hardware ⚙️ Key Features: Direct fit for RC10B6.4 and RC10B6.4D models Optional tuning parts to optimize airflow, improve downforce, and enhance cooling Lightweight and durable composite materials Designed by Team Associated for maximum performance & reliability This kit is perfect for racers who want to dial in their setup for competitive advantage. Whether you're aiming for better aerodynamics or more efficient motor cooling—this set has you covered.
$15.23
-
1UP Racing LowPro Bullet Plug Grips w/ 5mm Bullets (Black/Red) – 190432
Overview:Protect your electronics and add style to your setup with the 1UP Racing LowPro Bullet Plug Grips w/5mm Bullets. These grips slide directly onto 1UP 4mm and 5mm LowPro Bullet Plugs to clearly identify positive (+) and negative (–) wires, helping prevent costly mistakes while offering a professional finish. CNC machined from high-quality aluminum, they feature bold red and black anodizing, laser-etched polarity markings, and a silver outer ring for excellent grip and premium looks. The included 1UP 5mm LowPro Bullet Plugs have a low-profile 2mm tall head with 6-point contact for reduced resistance and a total length of 15mm—perfect for today’s LCG LiPo packs. Features: Instantly identifies positive (+) and negative (–) wires Prevents pulling on wires when unplugging your battery Hides messy solder joints for a cleaner look Precision CNC aluminum grips with black/red anodizing & laser etching Silver outer ring for excellent grip Includes: 1 Pair of LowPro Bullet Plug Grips (Black/Red) 1 Pair of 5mm LowPro Bullet Plugs Compatible with 1UP 4mm & 5mm LowPro Bullet Plugs (sold separately) Recommended: Secure with a drop of CA glue after installation Compatibility: Works with all 1UP Racing 4mm & 5mm LowPro Bullet Plugs Ideal for use with modern LCG LiPo batteries
$18.28
-
Reedy B5 Flat Sensor Wire (125mm) – 96994
Reedy B5 Flat Sensor Wire (125mm) – ASC96994Keep your electronics dialed and your wiring clean with the Reedy Flat Sensor Wire designed specifically for B5 series vehicles. At 125mm, it's a perfect fit for tight, compact setups where shorter wire runs are essential. The flat profile offers a streamlined look and hassle-free routing—ideal for racers looking to keep things tidy under the body. ✅ Designed for: RC10B5 / RC10B5M Fits most 1/10 ESC/motor setups 📏 Length: 125mm🧰 Flat wire for better cable management🔌 ROAR-legal sensor connection OEM Part #: ASC96994
$15.23
-
ProTek RC Low Profile 5mm “Super Bullet” Solid Gold Connectors (2 Male) – PTK-5045
Overview:Deliver maximum power with ProTek RC Low Profile 5mm “Super Bullet” Connectors, engineered for clean wiring, low resistance, and uncompromising reliability in high-current RC applications. About the Super Bullet ConnectorsThe ProTek RC Low Profile “Super Bullet” connectors feature a flat, lay-down solder design that makes for a tidy and efficient wiring setup—perfect for compact builds or low-clearance installations. Constructed from solid gold-plated brass, these connectors ensure superior conductivity and minimal voltage loss compared to traditional spring-type or Deans-style plugs. Designed for brushless motors, ESCs, chargers, and high-voltage batteries, these connectors set the new standard for performance RC power delivery. Features: Low-profile solder head for flat, lay-down wire connections Solid gold-plated design for ultra-low resistance and maximum efficiency Ideal for high-current / high-voltage applications Perfect for use between ESCs, batteries, motors, or power meters Improved durability and conductivity over traditional plug styles Simple to solder and install Includes: (2) 5mm Low Profile “Super Bullet” Male Connectors Other 5mm Bullet Options: PTK-5022: Standard (4 Male) PTK-5023: Standard (4 Female) PTK-5024: Standard (2 Male / 2 Female)
$7.61
-
Team Associated RC10B7 Caster Block Link Mounts (+0mm) (2) 92467
Team Associated RC10B7 Caster Block Link Mounts (+0mm) (2) [92467] 🛠️ Dial in your RC10B7 with Factory-Grade Precision!Swap in the Team Associated RC10B7 Carbon Fiber Caster Block Link Mounts for ultra-precise handling and durability where it counts. Made from tough carbon fiber and engineered to spec, these +0mm mounts are a must-have replacement or upgrade for racers chasing podium consistency. 🔧 Key Features:✅ +0mm geometry for a stock setup and consistent steering💪 Made from lightweight, high-strength carbon fiber🚗 Direct fit for the RC10B7—no guesswork, no fuss🔄 Perfect as spares or performance replacements 📦 Includes:(2) Carbon Fiber Caster Block Link Mounts (+0mm) 🔩 Part Number: 92467🏁 Fits: Team Associated RC10B7 1/10 Buggy
$15.23
-
Cayote 2S 145C LCG Shorty LiHV Battery (7.6V/4600mAh) – w/5mm Bullets
Cayote 2S 145C LCG Shorty LiHV Battery (7.6V/4600mAh) – w/5mm Bullets Dominate the Track with Low CG Power!Engineered for serious RC racers, the Cayote 2S 145C LCG Shorty LiHV Battery delivers lightning-fast acceleration, responsive throttle control, and high output — all in a lightweight, low-profile package. Perfect for 1/10 and 1/8 scale platforms seeking better balance and extreme performance. ✅ Features: 🔻 LCG (Low Center of Gravity) design for enhanced handling & cornering ⚡ 145C continuous discharge rate for aggressive power delivery 🏁 Built for competitive racing – from high-speed asphalt to rugged off-road 🔋 LiHV (High Voltage) technology boosts efficiency and top-end power 🔌 5mm bullet connectors for a secure, low-resistance connection 🧱 Hard case design ensures durability in demanding environments ✅ ROAR approved 📦 Includes: (1) Cayote 2S 145C LCG Shorty LiHV Battery (7.6V/4600mAh) 5mm bullet terminals (battery side) 📊 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 4600mAh Discharge Rate: 145C continuous Charge Rate: Max 1C Connector: 5mm Bullets (Battery) / 2mm (Balance) Dimensions: 95.8 x 46.5 x 18.5mm Weight: 162g Configuration: 2S1P Watt Hours: 34.96Wh ROAR Approved: ✅ Yes Power meets precision — the Cayote 145C Shorty LiHV is your go-to pack for next-level racing. 🏆
$94.52
-
Sticky Kicks RC Five Star Bearing Oil
The Sticky Kicks RC Five Star Bearing Oil is a premium, race-proven lubricant formulated specifically for high-speed ceramic and stainless steel RC racing bearings. Designed for serious racers, this oil helps keep bearings running smooth, efficient, and consistent under demanding conditions. Its carefully tuned formula reduces drag and lowers operating temperatures, helping maximize drivetrain efficiency and bearing longevity—perfect for competition-level maintenance and rebuilds. Product Details Formulated for hi-speed ceramic and stainless steel bearings Helps lower operating temperatures Reduces drag for improved efficiency Ideal for racing and regular bearing maintenance Precision applicator bottle Includes 10cc / 10ml bottle of Five Star Bearing Oil A must-have pit essential for keeping your bearings smooth, fast, and #superdialed every race day. 🏁
$13.71
-
TLR 22X Stiffezel Front Suspension Arms (2) – Part #: TLR-1094
Step up your racing game with these Stiffezel Front Suspension Arms for the TLR 22X! Engineered for high-performance racers, these arms provide increased stiffness and durability to enhance cornering, reduce flex, and maximize your control on high-bite tracks. 🔥 Features: Precision-engineered for the TLR 22X platform Stiffezel material delivers superior rigidity over stock arms Sharper steering response and enhanced high-speed handling Reduced flex = more precise suspension feel Perfect for traction-rich surfaces 📦 Includes:(2) Stiffezel Front Suspension Arms ✅ Compatibility:• TLR 22X• TLR 22X-4• TLR 22X-4 Elite• Losi 22S Sprint
$22.86
-
Team Associated 13mm Front Shock Spring (Red/4.0lbs) (44mm) 91944
Team Associated 13mm Front Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes Shock Spring Characteristic Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D
$15.23
-
AVID RC Ringer Wing Buttons
Product Overview The Avid Ringer Wing Buttons are designed to have that extra pop of two silver highlights without sacrificing durability. Details 7075-T6 Aluminum anodized with two silver highlight areas for that extra pop. M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market. Available colors: Black, Blue, Red, Pink, Orange, and Silver. Each package includes 2 Wing Mount Buttons.
-
Team Associated B6.1/B6.1D Factory Team Direct Drive Slipper Eliminator Kit (91800)
Eliminate the slip. Gain the edge. Upgrade your B6-series buggy with the Factory Team Direct Drive Slipper Eliminator Kit — the precision solution for racers who demand instant throttle response and maximum efficiency. This setup removes the traditional slipper assembly and mounts the spur gear directly to the top shaft, reducing rotating mass by 30% for quicker acceleration and sharper control. Perfect for Stock or Spec class racing (17.5T / 21.5T motors), this kit delivers smoother power transfer and improved consistency on high-traction surfaces like clay or dirt. Key Features: Direct-drive top shaft eliminates the traditional slipper clutch 30% lighter than the stock slipper assembly Faster acceleration from reduced rotating mass Improved drivetrain efficiency may extend run times Ideal for Stock or Spec racing (17.5T / 21.5T) Precision-machined Factory Team quality ⚠️ Note: Not recommended for use on carpet — high-grip surfaces may overstress idler gears. Includes: (1) Top Shaft (Direct Drive) (1) Direct Drive Hub (3) M3x0.5x5mm BHCS Screws (1) M4 Locknut w/Flange Compatible With: RC10 B6.1 / B6.1 Factory Lite / B6.1D RC10 B6.2 / B6.2D RC10 B6.3 / B6.3D RC10 B6.4 / B6.4D RC10 SC6.1 / SC6.2 RC10 T6.2 Team Associated Factory Team – precision, performance, perfection.
$39.63
-
Team Associated RC10B6.2 69mm CVA Bone (2) (91860)
Maintain smooth, efficient power transfer with the Team Associated RC10B6.2 69mm CVA Bones. Built from high-quality materials, these precision-machined components are designed to withstand the rigors of competitive racing while ensuring consistent drivetrain performance. Features: 69mm length for proper fitment and geometry Precision-machined for smooth, efficient power delivery Durable construction for long-lasting performance Direct replacement for worn or damaged CVA bones Includes: (2) 69mm CVA Bones Compatibility: Team Associated RC10B6.2 Perfect for keeping your buggy’s drivetrain strong, smooth, and race-ready.
$27.43
-
JConcepts 12mm Hex Mono 2.2" Front Wheels (4) – Yellow or White Part Numbers: JCO3347Y (Yellow), JCO3347W (White)
JConcepts 12mm Hex Mono 2.2" Front Wheels (4) – Yellow or WhitePart Numbers: JCO3347Y (Yellow), JCO3347W (White) Upgrade your 1/10 buggy with these JConcepts Mono 2.2" Front Wheels, designed for performance, durability, and style. Available in bright white or fluorescent yellow, these wheels feature popular dish-style detailing and are molded using an advanced manufacturing process for maximum precision and strength. Perfect for racers running Team Associated B5, B5M, B4.1, or Kyosho RB5 platforms with 12mm hex conversions, these wheels offer great fitment, longevity, and modern styling. 🔧 Key Features: Fits: Team Associated B4.1/B5/B5M/B4.2 (w/ adaptors), Kyosho RB5 (direct fit) Quantity: 4 wheels per pack Color Options: White (JCO3347W), Yellow (JCO3347Y) ROAR-legal sizing with a dish-style concave design 12mm hex mount Vented design improves glue adherence Made from durable, race-proven material 🛠️ Compatibility Notes: For B4.1: Requires JConcepts clamping hexes (front/rear) and Team Associated hex conversion For Kyosho RB5: Use locking-style rear wheel nuts (JC #2089 Blue or #2090 Black) Designed for standard (wide) front-end configuration Will not work properly with narrow setups or without locking nuts on RB5 Specs: Feature Detail Position Front Diameter 2.2" Hex Size 12mm Quantity 4 Wheels Scale 1/10 Buggy Color Options White / Yellow Vehicle Type 2WD Buggy Bring style and performance to your front end with the JConcepts Mono wheels—perfect for racers who demand precision and durability on the track.
-
Team Associated RC10B7 Spur Gear Cover, Bumpers & Bulkhead Shims Set [92427]
Team Associated RC10B7 Spur Gear Cover, Bumpers & Bulkhead Shims Set [92427] 🔧 Protect, Reinforce, ReplaceKeep your RC10B7 in peak form with this official replacement set! Whether you’re freshening things up or replacing worn components, this kit has you covered—literally. Includes everything you need to protect your spur gear, brace your bulkheads, and shield your ride from front-to-rear. 🛠️ Set Includes:✅ Front Bumper✅ Rear Bumper✅ Spur Gear Cover✅ Bulkhead Shims 🔩 Part Number: 92427🚗 Compatible With: Team Associated RC10B7 Team Associated RC10B7D
$19.81
-
Team Associated 10x15x4mm Factory Team Bearings (4 pcs) Part #: 91563
Upgrade your drivetrain with Team Associated Factory Team Bearings — precision 10x15x4mm bearings designed to reduce friction, smooth out rotation, and improve overall performance. Featuring the signature blue shield for easy identification, these premium bearings deliver tighter tolerances and longer-lasting durability compared to stock components. Perfect for restoring worn-out bearing sets or boosting efficiency in your B5M, Apex, Prolite 4x4, ProRally, MGT 3.0, and many more platforms using 10x15x4mm bearings. Features: Premium Factory Team–grade precision bearings Blue-shielded on one side for quick identification Reduces friction and slop for smoother drivetrain operation Ideal upgrade or replacement for worn bearings Compatible with multiple Team Associated platforms Includes: (4) 10x15x4mm Factory Team Bearings
$15.99
-
Team Associated RC10B6.4 Steering Bell Crank & Rack Set – 91973
Restore precision steering to your B6.4 or B6.4D with this genuine Team Associated replacement set. The kit includes two steering bell cranks and a steering rack, designed to keep your front-end dialed in and race-ready. 🔧 Features: Direct replacement for the RC10B6.4 and B6.4D Includes (2) bell cranks and (1) steering rack Durable, race-proven design ✅ Compatibility: RC10B6.4 RC10B6.4D Ideal for racers who want tight, responsive steering and long-lasting performance.
$13.71