Reedy Blackbox 610R 2S Competition ESC – ASC27016Unleash precision, power, and full control with the Reedy Blackbox 610R — Reedy’s most advanced 1/10 scale ESC yet. Built on the trusted legacy of the 510R, the 610R pushes the limits with updated 32-bit hardware, lightning-fast throttle response, and unmatched tuning capability. Whether you're running stock or modified 1/10 scale setups, this ESC delivers championship-winning performance in both on-road and off-road racing. Pair it with the optional Blackbox PROgrammer2 (not included) to unlock full customization and data logging. 🔧 Key Features: CNC-machined black aluminum case with integrated heat sink Fully adjustable brake, throttle, power, and safety functions Blinky mode with ROAR-approved software 32-bit MCU for ultra-fast response Precision throttle & brake control Ultra-low resistance FET board On-board power button Optional external fan ready Pro external capacitor board Firmware updateable (with PROgrammer2) 🧠 Advanced Tuning (with Blackbox PROgrammer2 – ASC27027): Brake Settings: Strength, frequency, drag brake, punch, dynamic drag Throttle Control: Drive frequency, current limit, punch, deadband Power Delivery: Boost and top speed timing, standard & expert modes Misc. Settings: BEC voltage, temp cutoff, rotation direction, mode switching Note: Requires firmware version EE460139 on the Programmer. Already installed if purchased as the 610R/Programmer combo (ASC27017). 📦 Specs: Voltage Input: 2S LiPo Suggested Use: 1/10 Off-Road & On-Road Resistance: 0.00043 ohms Continuous Current: 160A Motor Limit: 4.5T Dimensions: 38.5 x 36.9 x 19.5mm Weight (no wires/fan): 45g BEC Output: 6.0–7.4V / 5A Power Wires: 13-gauge silicone Fan: Optional (not included)

Read more less

Reedy Flat Sensor Wire (150mm) – ASC96980Keep your electronics tidy and your setup dialed with this Reedy Flat Sensor Wire. Originally included with Reedy Sonic motors, these high-quality flat wires are now available separately to fit your custom build needs. The flat design not only looks sleek but also makes routing easier and cleaner in tight spaces. Ideal for both 1/10 and 1/8 scale applications. 📏 Length: 150mm💡 Available in sizes from 70mm to 270mm ✅ Perfect for: Cleaner wiring layout Reedy Sonic motors and other ROAR-approved ESC/motor combos OEM Part #: ASC96980

Read more less

Team Associated 13mm Front Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated B6 Laydown Idler Gear (39T) (91716)Keep your laydown transmission running smooth with these genuine Team Associated 39T idler gears. Designed for the RC10 B6, B6.1, and B6.2 series buggies with a laydown setup, these are the direct replacements you need for peak drivetrain performance. Includes: (2) 39T Idler Gears Compatibility: RC10 B6 RC10 B6.1 RC10 B6.2 (with laydown transmission)

Read more less

Team Associated RC10B6.2 Rear Suspension Arm, 73mm   ASC91853

Read more less

Team Associated Gear Differential Rebuild [91463]🛠 Freshen Up Your Diff!Keep your ride dialed with the Team Associated Gear Differential Rebuild Kit, designed specifically for the optional ASC91461 gear diff. Whether you're doing routine maintenance or bringing a worn-out diff back to life, this kit has what you need to keep your buggy smooth, responsive, and race-ready. 🧰 Features:✅ Designed for the optional ASC91461 gear differential✅ Genuine Team Associated parts for perfect fit and function✅ Ideal for performance rebuilds and regular maintenance 📦 Includes:All necessary components to rebuild one gear differential 🔥 Part Number: 91463

Read more less

Team Associated RC10B6.2 Factory Team Carbon 75mm Rear Suspension Arms [91874] 💪 Lightweight. 💨 Rigid. 🏁 Race-Proven. Upgrade your RC10B6.2 with the Factory Team Carbon 75mm Rear Suspension Arms—built for racers who demand precision, strength, and speed. Crafted from ultra-rigid carbon material, these arms deliver sharper handling, improved durability, and better stability in high-traction conditions. ✅ 12% lighter than standard "hard" arms✅ Stronger and more durable than previous options✅ Improves high-speed stability and cornering control✅ Ideal for high-traction tracks✅ Direct Factory Team fit and finish Includes:(2) Carbon 75mm Rear Suspension ArmsPlastic Shims 📦 Part Number: 91874🔧 Brand: Team Associated🏎️ Compatible with: RC10B6.2

Read more less

Team Associated 13mm Front Shock Spring. These replacement springs are intended for the Team Associated B6.4, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Avid 7" High-Clearance Wing Set (Standard) – Uncut (2pcs) [AV10129-S] Product Overview: The Avid 7" High-Clearance / Low Drag Wing is meticulously engineered for 1/10 buggies requiring maximum airflow efficiency and structural integrity. Featuring high clearance wheel cutouts, smooth airflow shaping, and unmatched durability, this wing set is the perfect solution for racers demanding both performance and strength. This version includes two uncut wings in standard thickness, providing flexibility for trimming and custom fitment. Features: Set of two 7” uncut wings Standard thickness for maximum durability and longevity High-clearance wheel arches for improved tire clearance 18.5° low-drag rear angle relieves downforce pressure without compromising strength Small raised centerline mark for quick and precise centering during mounting Eight side support ribs for structural strength during impacts Embossed AVID logo at the center of each wing Includes gurney options to fine-tune rear traction (sold separately) Includes: (2) Avid 7" Uncut High-Clearance Wings (Standard Thickness) Part Number: AV10129-S

Read more less

🔧 Premium V2 Screw-Mount Front Shock ShaftsUpgrade your buggy's performance and durability with these Ti-Nitride coated 3x21mm shock shafts—built for smooth suspension action and long life! 💡 Key Features: Ti-Nitride coating reduces wear and improves shock performance Screw-mounted design keeps pistons secure NOT compatible with E-clip pistons 🔩 Includes:(2) Front Shock Shafts – 3x21mm ✅ Compatibility:Use with ASC91576 V2 shock bodies  

Read more less

Reedy B5 Flat Sensor Wire (125mm) – ASC96994Keep your electronics dialed and your wiring clean with the Reedy Flat Sensor Wire designed specifically for B5 series vehicles. At 125mm, it's a perfect fit for tight, compact setups where shorter wire runs are essential. The flat profile offers a streamlined look and hassle-free routing—ideal for racers looking to keep things tidy under the body. ✅ Designed for: RC10B5 / RC10B5M Fits most 1/10 ESC/motor setups 📏 Length: 125mm🧰 Flat wire for better cable management🔌 ROAR-legal sensor connection OEM Part #: ASC96994  

Read more less

  Team Associated 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shafts (2pcs) Durability Meets Precision. Upgrade your suspension with Team Associated’s V2 3x27.5mm Ti-Nitride Shock Shafts, engineered for ultra-smooth performance and long-lasting wear resistance. These shafts feature a screw-mount piston design—perfect for racers who demand consistency and reliability lap after lap. Compatible with specific buggy and truck shock bodies, these are a direct fit for serious performance upgrades. 🔩 Features: ✨ Ti-Nitride Coated – Hard coating increases wear resistance and reduces friction 🔧 Screw-Mount Design – Stronger and more secure piston mounting (no E-clips) 🚗 Vehicle Compatibility: Fits ASC91577 Buggy Rear Shock Bodies Fits ASC91578 Truck Front Shock Bodies ⚠️ Note: Not compatible with E-clip style pistons 📦 Includes: (2) 3x27.5mm V2 Ti-Nitride Screw Mount Shock Shafts Trust Team Associated components for reliable performance and race-ready precision.

Read more less

  Push your racing to the limit with the ProTek RC 2S 130C Shorty LiPo—engineered with Si-Graphene+ HV technology for insane power delivery and ultra-low internal resistance. Perfect for stock and mod classes, this 7.6V 5000mAh shorty pack offers lightning-fast response and consistency lap after lap. 🔋 Features: 2S HV LiPo rated at 7.6V for higher voltage punch Massive 130C burst and low internal resistance for peak performance Silicon-Graphene+ chemistry for superior cycle life and thermal stability Lightweight shorty case for optimal weight distribution 5mm bullet connectors for high-current flow ROAR Approved for sanctioned competition 📦 Includes: (1) 5000mAh 2S 7.6V HV LiPo Shorty Battery (1) 5mm to 4mm bullet adapter set Specs: Capacity: 5000mAh Voltage: 7.6V (2S HV) C-Rate: 130C Dimensions: 96x47x25mm Weight: Approx. 219g Connector Type: 5mm bullet Whether you're racing onroad or offroad, stock or modified—this ProTek pack delivers the edge you need to win.

Read more less

  📱 Wireless Tuning. Total Control.Ditch the cords and take full control of your ESC with the Hobbywing OTA Programmer. Designed to work with select Xerun, EzRun, Platinum, and Seaking ESCs, this compact module connects wirelessly to your smartphone using the HW Link App—giving you the power to fine-tune ESC settings, record real-time data, and even update firmware on the go. 🎯 Key Features: Real-time wireless tuning via the HW Link App Graphical interface with drop-downs and sliders for easy setup Built-in data logging and memory storage Seamless Bluetooth transmission One-touch factory reset Compact, lightweight design 📐 Specifications: Voltage: 5–12.6V Bluetooth Version: ≤ 4.0 Range: 0–3m (open field) Size: 30.0 x 25.5 x 8.5mm Weight: 10.2g 💡 Note: Compatible only with supported ESCs. Please check your ESC manual for compatibility. Download the HW Link V2 App for optimal performance. 🎮 Your ESC. Your Way.Whether you're dialing in race settings or checking temps after a bash session, this OTA module makes managing your ESC easier, faster, and smarter.

Read more less

This is a replacement Stiffezel Rear Arm Set for the Team Losi Racing 22 5.0 DC Elite 1/10 2WD Electric Buggy. Designed for VHA (Variable Hinge Angle) setups, these rear arms are optimized for dirt and clay tracks, offering enhanced rigidity and consistent performance. ✅ Fits:• TLR 22 5.0 DC Elite (2WD Buggy) ✅ Includes:• (1) Pair of VHA Stiffezel Rear Suspension Arms Perfect for racers looking to maintain top-tier handling and durability on loose surfaces.

Read more less

  Keep your transmission running smooth with this genuine TLR 22 4.0 laydown idler gear and shaft set. Designed specifically for the laydown transmission setup, this replacement set includes everything needed to restore drivetrain performance. ✅ Includes:• (2) Idler Gears• (1) Idler Shaft ✅ Compatible with: TLR 22 4.0 Laydown Transmission✅ OEM replacement for precise fit and function✅ Built tough for high-performance racing Essential for keeping your TLR 22 4.0 dialed in and track-ready.

Read more less

Team Exalt X-Rated 2S LiPo Battery (4400mAh/150C)📦 Part #: EXA3201 Dominate the track with the Team Exalt X-Rated 4400mAh 2S LiPo – engineered with next-gen chemistry for racers who demand maximum voltage, minimum resistance, and race-winning consistency. Whether you're running stock or mod, this pack delivers explosive acceleration and sustained punch all the way to the finish. ⚡ X-Rated Series Performance Highlights: 150C Continuous / 300C Burst Discharge Rate Silicon Graphene Technology for increased efficiency and lifespan Flat Discharge Curve means less sag, more power throughout your run Low Internal Resistance and cooler operating temps 5mm High-Amp Bullet Connectors for maximum current delivery ROAR Approval Pending 📊 Battery Specifications: Capacity: 4400mAh Voltage: 7.4V (2S) Discharge Rate: 150C Burst Rate: 300C Weight: 220g ± Dimensions: 96 x 47 x 25.1mm (LxWxH) Connector Type: 5mm Bullets Whether you're chasing podiums or pushing for personal bests, the EXA3201 X-Rated LiPo gives you the edge in acceleration, efficiency, and endurance.

Read more less

Cayote 2S 145C LCG Shorty LiHV Battery (7.6V/4600mAh) – w/5mm Bullets Dominate the Track with Low CG Power!Engineered for serious RC racers, the Cayote 2S 145C LCG Shorty LiHV Battery delivers lightning-fast acceleration, responsive throttle control, and high output — all in a lightweight, low-profile package. Perfect for 1/10 and 1/8 scale platforms seeking better balance and extreme performance. ✅ Features: 🔻 LCG (Low Center of Gravity) design for enhanced handling & cornering ⚡ 145C continuous discharge rate for aggressive power delivery 🏁 Built for competitive racing – from high-speed asphalt to rugged off-road 🔋 LiHV (High Voltage) technology boosts efficiency and top-end power 🔌 5mm bullet connectors for a secure, low-resistance connection 🧱 Hard case design ensures durability in demanding environments ✅ ROAR approved 📦 Includes: (1) Cayote 2S 145C LCG Shorty LiHV Battery (7.6V/4600mAh) 5mm bullet terminals (battery side) 📊 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 4600mAh Discharge Rate: 145C continuous Charge Rate: Max 1C Connector: 5mm Bullets (Battery) / 2mm (Balance) Dimensions: 95.8 x 46.5 x 18.5mm Weight: 162g Configuration: 2S1P Watt Hours: 34.96Wh ROAR Approved: ✅ Yes Power meets precision — the Cayote 145C Shorty LiHV is your go-to pack for next-level racing. 🏆

Read more less

Boost your buggy’s performance with this high-quality Factory Team Carbon Composite Laydown Gearbox and Chassis Braces set! Designed for racers looking to increase chassis rigidity and reduce unwanted flex, this upgrade delivers improved consistency, sharper handling, and enhanced tuning potential on high-grip surfaces. ✅ Key Features: Factory Team carbon composite construction for added durability and reduced flex Improves overall chassis response and driving precision Ideal for high-grip tracks where consistency is key Direct fit for RC10B6 platform—easy bolt-on performance upgrade 📦 Includes: (1) Laydown Gearbox (Carbon Composite) (2) Chassis Braces (Carbon Composite) 🔧 Compatibility: Team Associated RC10B6 Also compatible with RC10B6.1, B6.2, B6.3, and similar laydown setups Take your tuning to the next level with Factory Team precision—perfect for racers chasing every tenth!

Read more less

ProTek RC 2 Cell LiPo Battery: 7.6V High-Voltage Performance The ProTek R/C ULCG (Ultra Low Center of Gravity) 2S 130C Graphene + HV 4400mAh Shorty LiPo Battery is a great battery option for anyone looking for a lightweight, shorty style battery. The HV 4400mAh is the lightest (154 grams) and thinnest (18.3mm) Shorty race battery ProTek has produced to date, all while delivering race winning and industry leading capacity and peformance. When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, better run time, increased cycle life and increased voltage. This pack is ideal pack for 2WD and 4WD modified racing, or stock class racers that want optimum voltage for the entire run. The improved efficiency of this pack will allow for lower operating temperatures and lower internal resistance. This gives users a more consistent battery pack. ProTek Graphene + 130C Packs deliver the power needed by serious racers and enthusiasts alike. Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 130C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 130C Graphene + packs are perfect for racers and bashers that demand the absolute best. Features: Lighter and thinner than previous hardcase 2S LiPo packs Provides great runtime, with incredible voltage and punch Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery Improved efficiency, lower operating temperatures, and lower internal resistance! 10C max charge rates - 1C charge rate recommended for longest life Perfect for stock class racers looking to shave grams IMPORTANT LITHIUM POLYMER SAFETY INFORMATION DO NOT leave a battery in your model when charging DO NOT leave lithium batteries unattended when charging ALWAYS balance charge lithium battery ALWAYS use a LiPo Safe charging bag/box YOU MUST use a Li-Poly specific charger to charge lithium batteries (NiMH or NiCD only chargers WILL NOT WORK!) YOU MUST not over discharge lithium battery packs READ & UNDERSTAND the instructions carefully before operating this battery NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging. Includes: (1) ProTek R/C Battery (2) 5mm to 4mm Bullet Reducers (2) 5mm Bullet Connectors (1) 2mm Balance Bullet Connector Specifications

Read more less

Dominate the carpet with JConcepts' Fuzz Bite Wide front tires—built for precision, steering response, and longevity. The wide-body, low-profile design delivers quick transitions and reduced roll, while the reverse “water tower” pin layout grips tight in high-traction conditions. Engineered for elite-level performance on tight-knit turf or CRC-style carpeting. Features:• Low-profile, wide-body carcass for improved stability• Reverse “water tower” pins for precision grip• Radius-positioned pins deliver consistent traction• Directional sidewall lugs for steering response• Lightweight scalloped tire beads reduce unsprung weight• Includes two scalloped foam inserts  

Read more less

Team Losi Racing Upper Shock Bushing Set (4) – TLR5092 This is a genuine Team Losi Racing Upper Shock Bushing Set, designed for the TLR 22 1/10 buggy. These bushings provide a secure, smooth mounting point for your shock assembly and help reduce unwanted flex or wear during aggressive driving. ✅ Includes: 4 upper shock bushings✅ Fits: TLR 22 series✅ Genuine TLR performance parts Keep your suspension smooth and race-ready with factory-spec replacement bushings.

Read more less

Team Associated Rear Suspension Arms: RC10B74   ASC92130

Read more less

Team Associated RC10B7 Factory Team Carbon Gearbox – 92406Upgrade your RC10B7 or B7D with the Factory Team Carbon Laydown Gearbox. Built with carbon-infused material, this optional gearbox delivers enhanced rigidity and long-lasting durability. Ideal for racers chasing ultimate chassis stiffness and consistent power transfer. Note: Increased rigidity may reduce rear traction depending on track conditions. ✔️ Carbon-infused for superior stiffness and durability✔️ Designed for RC10B7 and RC10B7D 2WD buggies✔️ Laydown configuration for optimized weight distribution✔️ Genuine Factory Team performance part✔️ Includes: (1) Carbon laydown gearbox housing Built to handle high power with Factory Team precision. 🏁  

Read more less

Fine-tune your chassis stiffness with the Team Associated RC10B6.4/B6.4D Factory Team Carbon Top Plate & Ball Stud Mount. This precision-crafted upgrade offers enhanced rigidity while allowing adjustable flex, giving racers more control over handling characteristics. Features: Carbon fiber construction for lightweight strength Adjustable top plate stiffness for fine-tuning handling Includes ball stud mount for secure, precise linkage connection Factory Team quality for professional-grade performance Compatibility: Team Associated RC10B6.4 Team Associated RC10B6.4D Includes: (1) Carbon Top Plate (1) Ball Stud Mount Perfect for competitive racers looking to dial in their chassis response and steering feel.

Read more less

Upgrade your drivetrain with this optional set of TLR 22X-4 68mm CVA Driveshaft Bones. Precision-engineered for the front/center position, these driveshafts deliver smoother power transfer, improved durability, and consistent performance lap after lap—perfect for serious racers looking for reliability and precision. 🔧 Features:✅ 68mm CVA driveshaft bones for front/center position✅ Designed for optimized durability and power delivery✅ Precision machined for smooth, consistent operation✅ Ideal for high-performance race setups 📦 Includes:• (2) 68mm CVA Driveshaft Bones 🚗 Compatibility:• Losi 22S Sprint• Losi 22X• Losi 22X-4• Losi 22X-4 Elite Dominate the track with smoother handling and added strength—this is a must-have upgrade for your Losi race platform!

Read more less

Team Associated CVA/Wheel Hex Pin (4) [91436]🔩 Lock It Down with Precision!The Team Associated CVA/Wheel Hex Pin Set is your go-to solution for keeping your drivetrain tight and reliable. These precision steel pins are perfect replacements for connecting rear CVA axles and bones, or securing wheel hexes to both front and rear axles. 🛠 Features:✅ Durable steel construction✅ Perfect fit for CVA assemblies and wheel hexes✅ Essential for smooth, consistent performance 📦 Includes:(4) CVA/Wheel Hex Pins 🔥 Part Number: 91436🏁 Compatible with multiple Team Associated platforms

Read more less

Team Associated Rear Suspension Arms, Hard: RC10B74   ASC92131

Read more less

Team Associated RC10B7 Front Anti-Roll Sway Bars (5) [92459] 🌀 Precision in the Front, Grip in the Back!Upgrade your front-end handling with the Team Associated RC10B7 Front Anti-Roll Sway Bar Set. Whether you're fighting traction roll or just fine-tuning your buggy for max consistency, this 5-pack of sway bars gives you the tuning range you need to dominate any surface. Built for the RC10B7 and B7D platforms—just swap, test, and race! 🔧 Key Features:✅ Five sway bar options for ultimate front-end tuning🔄 Designed specifically for RC10B7 and B7D🎯 Helps maintain front grip and stability through corners🏁 Race-proven setup flexibility 📦 Includes:(5) Front Anti-Roll Sway Bars 🔩 Part Number: 92459🛠️ Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

Avid Moon Style Aluminum HV High Speed Cooling Fan (30mm x 30mm) – Black w/Silver Chamfer High Voltage | High RPM | Lightweight Aluminum Housing Keep your electronics cool and stylish with the Avid Moon Style 30mm Cooling Fan. Designed for high-performance RC setups, this fan features a sleek anodized black aluminum case with silver chamfered edges and delivers powerful airflow at up to 28,000 RPM. Compatible with 5.0V to 8.4V systems. ⚙️ Features: 🌬️ 28,000 RPM Performance – Excellent cooling for ESCs and motors 🧊 Machined Aluminum Case – Durable and efficient heat dissipation ⚡ High Voltage Capable – Operates from 5.0V up to 8.4V 🖤 Anodized Black Finish – With sharp silver chamfer styling 🔧 30x30x10mm Size – Standard size for a variety of mounting applications 🙃 Pro Tip: Peel off the sticker for a cleaner look! 📦 Specifications: Operating Voltage: 5.0–8.4V RPM: 28,000 Current Draw @ 8.4V: 0.6A Dimensions: 30mm x 30mm x 10mm Case Material: Black anodized aluminum w/ silver chamfers Fan Blade Material: Plastic 🧩 A perfect mix of style, strength

Read more less

1up Racing Lockdown Adjustable Bullet Plugs – Tool-Free Power, Trackside Ready 🔧 Say goodbye to wobbly connections and clunky installs — the Lockdown Bullet Plugs by 1up Racing are here to redefine how you power your RC car. These are the world’s first fully tool-free adjustable bullet plugs, delivering max efficiency, minimal resistance, and an unbeatable fit — all with just a twist. 💡 With an innovative compression-fit system and eye-catching finishes, these aren’t just bullet plugs — they’re an upgrade in performance and style. ✨ Key Features: 🔧 Tool-Free Adjustable Design – Get a perfect fit in 5mm or 4mm sockets without a single tool⚡ Low Resistance, High Efficiency – Maximize power transfer from battery to ESC🌀 Easy-Grip Thumb Screws – Fast install, secure lock-in every time📏 Ultra-Low Profile – Only 8mm tall when installed (shorter than 1up Heatsink Bullets)🖤 Dual-Tone Style – 10 bold anodized colors for the positive plug, with a sleek black negative🌟 Mirror-Like Chamfer & Deep Laser Engraving – Looks as good as it performs💪 Lightweight & Durable – Built for serious racers who demand reliability 📦 What’s in the Box? ✔️ (2) Lockdown Adjustable Bullet Plugs (1x Positive Color, 1x Black Negative) 📌 Note: Installed height may vary slightly depending on your battery terminal’s snugness. Looser terminals = lower thumb screw depth. 🏁 Don’t Get Caught Slippin’ – Lock In with 1up! When every millisecond counts, 1up Racing’s Lockdown Bullet Plugs deliver unmatched grip, power, and pit-lane convenience. No tools, no fuss — just pro-grade power transfer and personalized style. 💡 Upgrade to Lockdown Plugs – Because “Good Enough” Ain’t Fast Enough.

Read more less

🏆 Flysky Noble NB4+ AFHDS3 8-Channel 2.4GHz Radio System w/ FGr4B Receiver The FlySky Noble NB4+ is a world-class, 8-channel transmitter system built for elite RC racers and hobbyists. With its advanced AFHDS3 protocol, ultra-low latency performance, and striking full-color touchscreen interface, this radio sets a new benchmark in comfort, style, and control precision. 🧠 Smart Features: 3.5” full-color IPS touchscreen with 320x480 resolution Updated customizable UI with themes and wallpapers Adjustable & detachable steering wheel for left or right-handed use 8 fully customizable channels for complex setups USB-C port with coach mode and head-tracking support Telemetry-ready: monitor real-time voltage, temp, signal strength Ergonomic grip for comfortable long sessions 🔋 Battery & Connectivity: 3450mAh high-capacity battery (18650 cell, included) Quick-release battery system for fast swaps Includes FGr4B 4-channel AFHDS3 receiver with failsafe function 2.4GHz operation with >300m range 📦 Includes: (1) FlySky Noble NB4+ 8-Channel Transmitter (1) FGr4B AFHDS3 Receiver (1) 3450mAh 18650 Battery Product Manual 🔧 Needed to Complete: Nothing! Ready to use out of the box.

Read more less

JConcepts 12mm Hex Mono 2.2" Front Wheels (4) – Yellow or WhitePart Numbers: JCO3347Y (Yellow), JCO3347W (White) Upgrade your 1/10 buggy with these JConcepts Mono 2.2" Front Wheels, designed for performance, durability, and style. Available in bright white or fluorescent yellow, these wheels feature popular dish-style detailing and are molded using an advanced manufacturing process for maximum precision and strength. Perfect for racers running Team Associated B5, B5M, B4.1, or Kyosho RB5 platforms with 12mm hex conversions, these wheels offer great fitment, longevity, and modern styling. 🔧 Key Features: Fits: Team Associated B4.1/B5/B5M/B4.2 (w/ adaptors), Kyosho RB5 (direct fit) Quantity: 4 wheels per pack Color Options: White (JCO3347W), Yellow (JCO3347Y) ROAR-legal sizing with a dish-style concave design 12mm hex mount Vented design improves glue adherence Made from durable, race-proven material 🛠️ Compatibility Notes: For B4.1: Requires JConcepts clamping hexes (front/rear) and Team Associated hex conversion For Kyosho RB5: Use locking-style rear wheel nuts (JC #2089 Blue or #2090 Black) Designed for standard (wide) front-end configuration Will not work properly with narrow setups or without locking nuts on RB5 Specs: Feature Detail Position Front Diameter 2.2" Hex Size 12mm Quantity 4 Wheels Scale 1/10 Buggy Color Options White / Yellow Vehicle Type 2WD Buggy Bring style and performance to your front end with the JConcepts Mono wheels—perfect for racers who demand precision and durability on the track.

Read more less

Upgrade your rear-end setup with precision and strength! This wide gull-wing carbon fiber rear shock tower is designed to optimize shock positioning for increased stability and rear traction, especially in high-bite track conditions. A direct replacement part for B6.3 and B6.3D platforms, it’s lightweight, ultra-durable, and race-proven. ✅ Key Features: High-quality carbon fiber construction for superior strength and reduced flex Wide gull-wing geometry enhances suspension performance and tuning range Lightweight upgrade with professional-level reliability Direct replacement with factory fit and finish 📦 Includes: (1) Carbon Fiber Wide Gull-Wing Rear Shock Tower 🔧 Compatibility: Team Associated RC10B6.3 Team Associated RC10B6.3D Pair it with the front gull-wing tower (#91880) for maximum performance and chassis balance.

Read more less

Upgrade your 22 5.0 series with precision gearing using the TLR 48 Pitch SHDS Spur Gear. Designed for use with the optional TLR Complete SHD Slipper System (TLR232085), these spur gears offer smooth, consistent performance and are available in a variety of tooth counts from 69T to 81T. ✅ Compatible with:• Losi 22 5.0 (with SHD Slipper System) ✅ Features:• High-strength composite construction• Available in multiple tooth counts (69T–81T)• Designed for 48 pitch setups• Perfect for fine-tuning your gear ratio 📦 Includes:(1) SHDS Spur Gear (choose tooth count)

Read more less

Team Associated RC10B7 Idler Gears (3) [92421] 🌀 Smooth Power, Every LapKeep the drivetrain of your B7 running smooth and strong with these genuine Team Associated RC10B7 Idler Gears. Designed for durability and precision, this 3-gear set ensures optimal power transfer and consistent performance during hard racing or long practice days. 🛠️ Includes:✅ (3) Idler Gears 🔩 Part Number: 92421🚗 Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less