Team Associated RC10B7 Spur Gear Cover, Bumpers & Bulkhead Shims Set [92427] 🔧 Protect, Reinforce, ReplaceKeep your RC10B7 in peak form with this official replacement set! Whether you’re freshening things up or replacing worn components, this kit has you covered—literally. Includes everything you need to protect your spur gear, brace your bulkheads, and shield your ride from front-to-rear. 🛠️ Set Includes:✅ Front Bumper✅ Rear Bumper✅ Spur Gear Cover✅ Bulkhead Shims 🔩 Part Number: 92427🚗 Compatible With: Team Associated RC10B7 Team Associated RC10B7D

Read more less

Team Associated RC10B7 Idler Gears (3) [92421] 🌀 Smooth Power, Every LapKeep the drivetrain of your B7 running smooth and strong with these genuine Team Associated RC10B7 Idler Gears. Designed for durability and precision, this 3-gear set ensures optimal power transfer and consistent performance during hard racing or long practice days. 🛠️ Includes:✅ (3) Idler Gears 🔩 Part Number: 92421🚗 Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

Team Associated RC10B7/B7D Factory Team Aluminum One-Piece Servo Mount (Blue) [92456] 💙 Lock It Down. Steer with Precision.Take your B7 or B7D to the next level with the Factory Team One-Piece Servo Mount! Crafted from ultra-light, tough-as-nails aluminum and finished in anodized blue with crisp chamfers and a laser-etched FT logo, this upgrade is all about flex-free performance and next-level style. Say goodbye to servo slop and hello to razor-sharp steering! 🔧 Upgrade Highlights:✅ One-piece flex-free design = increased steering precision🎯 Factory Team anodized finish with machined highlights💪 CNC aluminum construction—lightweight + durable✨ Laser-etched FT logo for pro-level bling 📦 Includes:(1) Blue Factory Team One-Piece Servo Mount 🔩 Part Number: 92456🚗 Compatible With: Team Associated RC10B7 Team Associated RC10B7D

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/4400mAh) – 140C Burst Ultra-Lightweight. High Voltage. Race-Ready. The Gens Ace Redline 2.0 4400mAh Shorty LiHV delivers elite-level performance in a compact, lightweight design. Perfect for modified and stock class racing, this pack uses Silicon Graphene technology for ultra-efficient discharge, reduced heat, and excellent cycle life — all in a low-profile shorty layout for ideal chassis balance. ⚙️ Features: ⚡ 140C Continuous Discharge – smooth, consistent power when it matters most 🔋 7.6V LiHV / 4400mAh Capacity – lightweight performance for serious racers 🔌 5mm Bullet Connectors – high-amp, secure, and reliable power transfer 🪶 Ultra Low-Profile Shorty Pack – minimal weight, maximum agility 🧪 Matched cells and advanced stacking for stable output and long life 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 4400mAh Continuous Discharge: 140C Configuration: 2S1P Watt Hours: 33.44Wh Connector: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 47 x 18mm Weight: 163.1g (5.75oz) 🏁 For racers demanding every ounce of power in a nimble format, the Redline 2.0 4400mAh Shorty delivers blazing-fast response and unbeatable efficiency on the track.

Read more less

Lightweight. Grippy. Colorful. Affordable. Upgrade your wheels without draining your wallet! BOOF RC M4 Flange Lock Nuts deliver rock-solid wheel security with a lightweight, race-ready design — perfect for high-grip tracks, brutal bashing sessions, and everything in between. Precision machined from high-quality aluminum and finished in bold anodized colors, these nuts keep your wheels locked down tight while adding a clean, custom look to your ride. Engineered for strong bite and consistent performance, so you stay focused on driving — not chasing wheels across the track. Key Features: ✅ Lightweight Aluminum Construction – Reduce rotating mass, increase performance.✅ Serrated Flange Design – Bites into the wheel for improved grip and security.✅ Low-Profile, Race-Ready Shape – Clean look that stays clear of obstacles.✅ 7mm Hex & M4 Thread – Fits most 1/10 scale vehicles (buggy, truck, touring, drift, etc.).✅ Vibrant Anodized Colors – Customize your setup with bold, high-contrast hardware.✅ Engineered for Everyday Abuse – Strong bite without stripping or backing off. Available Colors: 🟥 Red⬛ Black🩶 Titanium🟦 Royal Blue🩵 Light Blue 🟩 Green🟪 Purple⭐ Gold🤍 Silver (Availability may vary) Includes: (4) BOOF RC Aluminum M4 Flange Lock Nuts Perfect For: 1/10 Off-Road Racing Drift builds Street bashers Scale and comp crawlers Touring cars Track cars Whether you're racing, drifting, or crawling — these nuts keep your wheels firmly planted and looking sharp. BOOF RC: Premium Parts. Not Premium Prices. We don’t pretend our hardware is magic — just solid, race-worthy gear at a price that makes sense.Spend less on nuts, more on tires and track time. 🏁 🔥 Lock it down. Stand out. Go race. Grab a set of BOOF M4 Lock Nuts today and give your ride some BOOF-grade hardware swagger!

Read more less

The Team Associated Reedy Power Servo Wire Extension Leads are the perfect solution for clean and reliable wiring in your RC build. Whether you’re routing around a large chassis or need extra length to reach your ESC or receiver, these premium extensions ensure a secure and low-resistance connection every time. Available in three convenient lengths (100mm, 150mm, and 200mm), they make it easy to achieve a tidy, professional-grade layout while maintaining top-level electrical performance. ⚙️ Features: Ideal for extending servo or ESC leads in any RC application High-quality, flexible wire for smooth routing and durability Cleanly connects servo to speed controller with minimal resistance Available in multiple lengths for the perfect fit in any setup Factory-terminated with precision connectors for plug-and-play use 📏 Specifications: Part Numbers: 100mm (3.93") — 27143 150mm (5.90") — 27144 200mm (7.87") — 27145 Connector Type: Standard Servo Plug (JR-Style) Lengths Available: 100mm / 150mm / 200mm Wire Gauge: 26 AWG (Flexible silicone wire) Brand: Reedy Power (by Team Associated) 📦 Includes: (1) Servo Wire Extension Lead (Choose Length) 💡 Pro Tip:Use the shortest extension that fits your layout — shorter wires reduce electrical resistance and keep your build looking clean and efficient.  

Read more less

Compatible with iCharger, iSDT, and SkyRC Chargers Overview:The TQ Wire XT60 2S Charge Cable delivers the perfect balance of premium materials, versatile connectivity, and durability. Designed for serious RC racers and hobbyists, this lead makes charging your 2S LiPo batteries easier, cleaner, and more reliable—whether you’re in the pit or at the track. About the XT60 2S Charge Cable Built for Performance and DurabilityFeaturing dual-size stepped bullets (4mm & 5mm), this cable ensures compatibility with a wide range of LiPo batteries. The 2-foot cable uses 12-gauge high-strand silicone wire wrapped in protective black nylon mesh, giving you maximum current flow and long-lasting flexibility. The XT60 connector provides a secure, low-resistance connection to your charger, compatible with popular models such as the Junsi X6 iCharger, iSDT, and SkyRC B6, as well as other chargers that use an XT60 output. Premium Design FeaturesTQ Wire went the extra mile with a molded strain relief housing around the bullet connectors and balance port, ensuring a stronger connection and minimizing wire fatigue. Integrated “grippers” make it easy to remove the bullets from your battery safely and efficiently—no more struggling with tight fits or risking wire damage. Features: XT60 connector for charger connection (iCharger/iSDT compatible) 4mm & 5mm stepped bullets fit most 2S LiPo packs Durable molded strain relief for long life and safety Integrated “grippers” for easy battery removal Heavy-duty 12-gauge silicone wire for efficient power transfer Wrapped in black nylon mesh for protection and clean looks 2-foot length provides ample reach without clutter Specifications: Specification Details Length 2 feet (610mm) Wire Gauge 12 AWG Charger Connector XT60 Battery Connectors 4mm & 5mm Stepped Bullets Balance Port XH Compatibility Junsi X6 iCharger, SkyRC B6, iSDT, and any XT60-output charger Includes: (1) TQ Wire 2S XT60 Charge Cable with 4mm/5mm Bullets Note:TQ Wire also offers a version with low-profile 90° tubes instead of the XT60 connector for alternative setups.

Read more less

Upgrade or refresh your RC10B7’s steering and suspension with this genuine Team Associated rod end set. Designed specifically for the Team Associated RC10B7 1/10 buggy, these rod ends deliver the precision fit, smooth articulation, and durability you need to keep your buggy performing at its best. 📦 Includes: (16) Rod Ends 🔧 Compatibility: Team Associated RC10B7 1/10 Buggy 💡 Perfect for replacing worn or damaged rod ends to restore crisp steering response and suspension performance.

Read more less

JConcepts 12mm Hex Mono 2.2" Front Wheels (4) – Yellow or WhitePart Numbers: JCO3347Y (Yellow), JCO3347W (White) Upgrade your 1/10 buggy with these JConcepts Mono 2.2" Front Wheels, designed for performance, durability, and style. Available in bright white or fluorescent yellow, these wheels feature popular dish-style detailing and are molded using an advanced manufacturing process for maximum precision and strength. Perfect for racers running Team Associated B5, B5M, B4.1, or Kyosho RB5 platforms with 12mm hex conversions, these wheels offer great fitment, longevity, and modern styling. 🔧 Key Features: Fits: Team Associated B4.1/B5/B5M/B4.2 (w/ adaptors), Kyosho RB5 (direct fit) Quantity: 4 wheels per pack Color Options: White (JCO3347W), Yellow (JCO3347Y) ROAR-legal sizing with a dish-style concave design 12mm hex mount Vented design improves glue adherence Made from durable, race-proven material 🛠️ Compatibility Notes: For B4.1: Requires JConcepts clamping hexes (front/rear) and Team Associated hex conversion For Kyosho RB5: Use locking-style rear wheel nuts (JC #2089 Blue or #2090 Black) Designed for standard (wide) front-end configuration Will not work properly with narrow setups or without locking nuts on RB5 Specs: Feature Detail Position Front Diameter 2.2" Hex Size 12mm Quantity 4 Wheels Scale 1/10 Buggy Color Options White / Yellow Vehicle Type 2WD Buggy Bring style and performance to your front end with the JConcepts Mono wheels—perfect for racers who demand precision and durability on the track.

Read more less

Boost your buggy’s performance with this high-quality Factory Team Carbon Composite Laydown Gearbox and Chassis Braces set! Designed for racers looking to increase chassis rigidity and reduce unwanted flex, this upgrade delivers improved consistency, sharper handling, and enhanced tuning potential on high-grip surfaces. ✅ Key Features: Factory Team carbon composite construction for added durability and reduced flex Improves overall chassis response and driving precision Ideal for high-grip tracks where consistency is key Direct fit for RC10B6 platform—easy bolt-on performance upgrade 📦 Includes: (1) Laydown Gearbox (Carbon Composite) (2) Chassis Braces (Carbon Composite) 🔧 Compatibility: Team Associated RC10B6 Also compatible with RC10B6.1, B6.2, B6.3, and similar laydown setups Take your tuning to the next level with Factory Team precision—perfect for racers chasing every tenth!

Read more less

Team Losi Racing Upper Shock Bushing Set (4) – TLR5092 This is a genuine Team Losi Racing Upper Shock Bushing Set, designed for the TLR 22 1/10 buggy. These bushings provide a secure, smooth mounting point for your shock assembly and help reduce unwanted flex or wear during aggressive driving. ✅ Includes: 4 upper shock bushings✅ Fits: TLR 22 series✅ Genuine TLR performance parts Keep your suspension smooth and race-ready with factory-spec replacement bushings.

Read more less

Team Associated Rear Suspension Arms: RC10B74   ASC92130

Read more less

When performance matters, the Team Exalt X-Rated 5700mAh 2S LiPo is your ultimate power source. Designed with cutting-edge Silicon Graphene technology, this pack delivers exceptional efficiency, low resistance, and long-lasting power — giving you the edge you need lap after lap. ⚡ X-Rated Series Performance Highlights: 135C Continuous / 270C Burst Discharge Rate Silicon Graphene Cell Technology for improved efficiency and cycle life Flat Discharge Curve maintains consistent voltage under load Low Internal Resistance for cooler operation and more punch 5mm High-Amp Bullet Connectors ensure high current throughput ROAR Approval Pending 📊 Battery Specifications: Capacity: 5700mAh Voltage: 7.4V (2S) Discharge Rate: 135C Burst Rate: 270C Weight: 227g ± Dimensions: 96 x 47 x 25.1mm (LxWxH) Connector Type: 5mm Bullets Whether you're pushing your electronics to the limit or chasing consistency in long mains, the EXA3202 X-Rated LiPo gives you the confidence to run harder and longer.

Read more less

Team Exalt X-Rated 2S 135C HVX LiHV LCG Shorty Battery (7.6V/5100mAh) High Voltage. Race Ready. ROAR Approved. Give your setup the edge it deserves with the Team Exalt X-Rated HVX LiHV Battery. Built for competition, this 7.6V 2S LCG pack combines advanced chemistry, low resistance, and Silicone Graphene tech for powerful, consistent output and longer cycle life. The hardcase shorty design makes it perfect for tight 1/10 chassis builds where balance and performance are critical. ⚙️ Features: ✅ 135C Continuous Discharge Rate for maximum punch ⚡ LiHV (7.6V) design for high-voltage performance 🧠 Silicone Graphene Technology for lower IR and longer life 🔌 5mm High-Amp Bullet Connectors included 🏁 ROAR Approved since Dec. 2024 – race legal and track ready 🧊 LCG Hardcase to fit snug in shorty-compatible chassis 📐 Specifications: Voltage: 7.6V (LiHV 2S2P) Capacity: 5100mAh Continuous Discharge: 135C Dimensions: 96 x 46 x 22.5mm (LxWxH) Weight: 210g (7.40oz) Connector Type: 5mm bullets Balance Plug: 2mm bullets Watt Hours: 38.8Wh Charge Rate: 1C Max Configuration: LCG Hardcase Shorty ROAR Approved ✅ 💥 Optimized for elite 1/10 scale racing in both off-road and on-road platforms.Stay cool, stay powerful — Exalt X-Rated gets you to the finish line faster.  

Read more less

Keep your suspension dialed in with these M3x48mm steel turnbuckles from Team Associated. Designed for strength and precision, they’re a direct replacement for worn or bent camber or steering links on a variety of Team Associated vehicles. 🔥 Key Features: High-strength steel construction for durability M3 thread with a 48mm (1.89") length Ideal for use in suspension and steering linkages Precision-machined threads for secure fit and adjustability Standard AE turnbuckle design for easy setup ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 series (various locations) SC6.1 / T6.1 / T6.2 May also fit other models requiring M3x48mm turnbuckles — check your manual for fitment 📦 Includes: (2) M3 x 48mm Turnbuckles (1.89") ⚠️ Note:For proper installation, use a 3mm turnbuckle wrench and thread into ballcups evenly to maintain symmetry and alignment.

Read more less

Upgrade your RC10B6.3 front-end handling with these Factory Team Steering BlockArms. Featuring a +1mm height and made from lightweight carbon fiber, these HT (High Traction) arms are designed to optimize steering feel and response in high-grip conditions. A must-have for racers looking to fine-tune their setup for maximum performance. 🔥 Key Features: Genuine Team Associated Factory Team upgrade +1mm height for increased front roll center High traction (HT) geometry improves cornering in grippy conditions Constructed from precision-cut carbon fiber Lightweight and durable for competition use ✅ Compatibility: RC10B6.3 RC10B6.3D May fit other RC10B6-series vehicles with similar front-end geometry 📦 Includes: (1) Left Steering Block Arm (1) Right Steering Block Arm ⚠️ Note:Factory Team parts are intended for experienced builders and racers. Always check fitment before installation.

Read more less

Upgrade your suspension precision with the Factory Team 13mm Shock Pistons from Team Associated. The #91932 piston set features two 1.6mm holes with a 2.5mm thickness, providing a stiffer pack than larger hole configurations—ideal for high-speed, high-traction conditions. 📦 Includes: (2) FT 13mm Shock Pistons – 2x1.6mm holes 2.5mm thick profile ⚙️ Key Features: Designed for 13mm shock bodies Precision-molded for consistency and smooth operation Offers increased damping over 2x1.7 and 2x1.8 setups Used by top racers for fine-tuning on rough or fast tracks Fits platforms like RC10B6.4, RC10B74.2, and more 📌 Tuning Note: Smaller holes = more pack. Great for front shocks when you want the car to stay flatter in transitions or landings.

Read more less

Fine-tune your rear suspension geometry with the RC10B74 Rear Hub Insert Set from Team Associated. These precision-molded inserts allow you to customize hub adjustments for optimized handling on a variety of track surfaces. 🔧 Key Features: Factory Team precision for pro-level tuning Multiple offset options for customized camber and toe settings High-quality molded composite for durability Direct fit for RC10B74 rear hubs Ideal for racers seeking performance edge 📦 Includes: (1) Set of Rear Hub Inserts (multiple offsets) ✅ Compatibility: Team Associated RC10B74 May fit other models in the B74 lineup (check manual for fitment) Whether you're tuning for more cornering grip or better straight-line stability, this insert set gives you the flexibility you need to dial in your setup.

Read more less

Overview:Upgrade your motor mounting hardware with the JConcepts 3x6mm Finnisher Titanium Motor Screws. Precision-machined from lightweight titanium, these screws are both strong and stylish—giving you reduced weight without sacrificing durability. Available in Blue (2549-1) or Black (2549-2) anodized finishes, they’re the perfect blend of function and looks for your high-end RC build. Features: Machined from premium titanium for maximum strength and reduced weight Available in anodized Blue or Black finishes Low-profile Finnisher head design for a sleek look M3 x 6mm size – ideal for motor mounting applications Includes 2 screws per package Compatibility: Fits most 1/10 scale motors and motor plates that require 3x6mm screws Commonly used across popular RC racing platforms (check your motor and chassis manual for exact fitment) Part Numbers: Blue – 2549-1 Black – 2549-2  

Read more less

Upgrade your rear-end setup with precision and strength! This wide gull-wing carbon fiber rear shock tower is designed to optimize shock positioning for increased stability and rear traction, especially in high-bite track conditions. A direct replacement part for B6.3 and B6.3D platforms, it’s lightweight, ultra-durable, and race-proven. ✅ Key Features: High-quality carbon fiber construction for superior strength and reduced flex Wide gull-wing geometry enhances suspension performance and tuning range Lightweight upgrade with professional-level reliability Direct replacement with factory fit and finish 📦 Includes: (1) Carbon Fiber Wide Gull-Wing Rear Shock Tower 🔧 Compatibility: Team Associated RC10B6.3 Team Associated RC10B6.3D Pair it with the front gull-wing tower (#91880) for maximum performance and chassis balance.

Read more less

Upgrade your drivetrain with this optional set of TLR 22X-4 68mm CVA Driveshaft Bones. Precision-engineered for the front/center position, these driveshafts deliver smoother power transfer, improved durability, and consistent performance lap after lap—perfect for serious racers looking for reliability and precision. 🔧 Features:✅ 68mm CVA driveshaft bones for front/center position✅ Designed for optimized durability and power delivery✅ Precision machined for smooth, consistent operation✅ Ideal for high-performance race setups 📦 Includes:• (2) 68mm CVA Driveshaft Bones 🚗 Compatibility:• Losi 22S Sprint• Losi 22X• Losi 22X-4• Losi 22X-4 Elite Dominate the track with smoother handling and added strength—this is a must-have upgrade for your Losi race platform!

Read more less

Upgrade your suspension game with these Team Associated 3x23mm V2 Ti-Nitride Front Shock Shafts. Built for precision and durability, these screw-mount shafts are a perfect fit for racers looking to keep their ride smooth and responsive. 🔧 Features:✅ Titanium Nitride coating for reduced friction and wear✅ Screw-mount design for secure, reliable installation✅ Precision machined for consistent performance 📦 Includes:(2) 3x23mm Front Shock ShaftsMounting Hardware 🚗 Compatibility:• Team Associated B64D• Team Associated B6 Series• Team Associated B74 / B74.2• Team Associated B7 / B7D• Team Associated SR10• Team Associated RB10

Read more less

Overview:The JConcepts XRAY XB2 2025 “S2” 1/10 Buggy Body delivers pro-level performance and aerodynamic precision for the latest XB2 platform. Originally designed for world-champion competition, the S2 design has become a staple for racers running low-profile setups on dirt, carpet, or turf. Precision-molded from high-quality clear polycarbonate, the S2 body features an aggressive low-drag profile with refined airflow management and enhanced downforce for stable, responsive handling.Available in both Standard (0685) and Lightweight (0685L) versions to match your preferred balance of strength and agility. About the S2 Buggy Body Streamlined Style & PerformanceThe S2 body uses computer-aided design to achieve symmetry, precision, and consistent airflow. Its low-profile cab, recessed hood, and dual window design enhance cooling and responsiveness, while the integrated center fin improves high-speed stability. Sidepod scoops can be trimmed to tune downforce or airflow, and the body wraps snugly around the XRAY spur-gear guard for a perfect fit. Each kit includes two 6.5" wings, making it a versatile choice across all surface types. Features Aerodynamic low-profile shape reduces drag and boosts corner speed Dual-window cab and recessed hood for improved airflow and cooling Rear sidepod scoops for customizable downforce or airflow tuning Stabilizing center fin and reinforced side rails for durability Perfect fit around XRAY spur-gear guard Includes two 6.5” wings for multi-surface versatility Available in Standard and Lightweight options Includes (1) XRAY XB2 2025 “S2” 1/10 Buggy Body (choose Standard or Lightweight) (2) Wings (1) Decal Sheet (1) Window Masking Sheet Compatibility XRAY XB2 2025 Tech Note: Painted body shown in photos is for illustrative purposes only. The product you will receive is clear and unpainted.

Read more less

Upgrade your 22 5.0 series with precision gearing using the TLR 48 Pitch SHDS Spur Gear. Designed for use with the optional TLR Complete SHD Slipper System (TLR232085), these spur gears offer smooth, consistent performance and are available in a variety of tooth counts from 69T to 81T. ✅ Compatible with:• Losi 22 5.0 (with SHD Slipper System) ✅ Features:• High-strength composite construction• Available in multiple tooth counts (69T–81T)• Designed for 48 pitch setups• Perfect for fine-tuning your gear ratio 📦 Includes:(1) SHDS Spur Gear (choose tooth count)

Read more less

Team Associated Rear Suspension Arms, Hard: RC10B74   ASC92131

Read more less

This Buggy Body is a clear body option intended for the Team Associated RC10B7 buggy. Using the same body style included in the RC10B7 kit, this clear body gives you the option to add a spare body to your stable or add your own custom paint and flair! NOTE: Painted body shown in the photos is for illustrative purposes only. The product you will receive is clear and unpainted. Includes: (1) RC10B7 Buggy Body (Clear) (1) Window mask sheet Stickers COMPATIBILITY: Team Associated RC10 B7 OriginalTeam Associated RC10 B7D

Read more less

Team Associated RC10B7 Shock Tower Covers & Upper Wing Mount [92487] 💥 Upgrade your B7 with Precision Fit & Factory Style!Keep your buggy looking factory fresh and race-ready with the Team Associated RC10B7 Shock Tower Covers & Upper Wing Mount. Designed specifically for the RC10B7 platform, this set adds clean protection for your shock towers while locking down your rear wing with a durable, lightweight upper mount setup. 🏁 Why You’ll Love It:✅ Direct fit for the B7 platform—no mods needed🛡️ Protects your shock towers from dirt, debris, and damage🚀 Lightweight upper wing mount keeps your wing locked and stable🔩 Includes all the hardware you need—bolt it on and go! 📦 Includes:(2) Front Shock Tower Covers(1) Rear Shock Tower Cover(1) Upper Wing Mount SetMounting Hardware 🛠️ Part Number: 92487🏎️ Vehicle Compatibility: Team Associated RC10B7  

Read more less

Pro-Motion Viper 2.2" Slim 2WD Front LP Carpet Buggy Tires (2) — C4 Red (Soft Compound)Part #: 3070-C4 Precision Steering. Peak Grip. Podium Ready. The Pro-Motion Viper Slim 2WD Front Tire is engineered for high-bite indoor tracks, delivering precise steering response with its low-profile carcass and directional tread. The soft C4 Red compound gives you the edge in low-grip or cooler track conditions, while the tapered mini pin layout and dual outer wedges help maintain control in high-speed corners and through bumps. ✅ Slim profile designed for 2WD front buggies✅ Low-profile sidewall for reduced flex and sharper feel✅ C4 Red soft compound for aggressive front-end grip✅ Directional tread for tunable steering response✅ Optimized for carpet and turf tracks 📦 Includes:(2) Viper 2.2" Slim 2WD Front LP Carpet Tires 💡 Pro Tip: Match with C4 Viper rears for balanced handling and maximum traction.

Read more less

  This is a replacement Hobbywing Xerun Super Capacitor Module, intended for use with the Xerun series ESC's.  Features: Super low impedance. Low temperature in working state. Reduces the RF interference to make the RC model more reliable, Improves the burst power when the motor starts to run. Specifications:Capacity: 330uF*2.Voltage: 16V.Impedance: 0.002 ohmRipple Current Endurance: 24 AmpSize: 29mm * 13mm * 13.2mmWeight: 5gSuitable ESC: XERUN and EZRUN series 1/10 scale ESC.

Read more less

  Power. Precision. Performance. Upgrade your ESC with the Hobbywing Module-X Non-Polarity Capacitor Module — engineered to deliver faster throttle response, smoother acceleration, and reduced electrical noise for ultimate racing consistency. Perfect for 1/10-scale Modified or Stock setups, this high-efficiency capacitor pack enhances performance without adding unnecessary weight or bulk. Race-Grade EfficiencyThe Module-X features low impedance and high ripple current endurance, allowing it to absorb voltage spikes and minimize interference caused by rapid ESC switching. The result: improved startup acceleration, lower heat generation, and longer ESC lifespan. Compact and lightweight, it mounts easily on your chassis for a clean, professional installation. ⚡ Features: Greatly improves startup acceleration and throttle response Reduces interference from ESC power switching Low impedance design for higher efficiency Minimal heat generation under load Small, lightweight, and easy to install Designed for 1/10-scale racing applications 📏 Specifications: Size: Standard (1/10-scale) 📦 Includes: (1) Hobbywing Module-X Modified/Stock Non-Polarity Capacitor Module  

Read more less

  Keep your battery secure and your buggy race-ready with the Team Associated B6 Battery Strap. Designed as a direct replacement part, this strap ensures a snug fit and reliable hold for your battery pack during the most demanding runs. ✅ Direct Replacement – Fits RC10 B6 and B6D buggies✅ Secure Fit – Keeps your battery firmly in place✅ Complete Package – Includes strap, nuts, and hardware Includes: (1) Battery Strap (2) Battery Strap Nuts (Hardware Set) Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D

Read more less

Dial in your suspension for ultimate precision with the Factory Team 13mm Shock Pistons. The #91931 pistons feature two 1.5mm holes, offering maximum damping for high-traction surfaces and rough tracks where control is key. 📦 Includes: (2) FT 13mm Shock Pistons – 2x1.5mm hole configuration 2.5mm thickness ⚙️ Key Features: Compatible with 13mm Team Associated shock bodies CNC-precision molding ensures consistency Smaller hole size for slower rebound and increased pack Ideal for high-bite or rough surface tracks Tuning option for front or rear shocks on RC10B6.4, RC10B74.  

Read more less

Upgrade your 13mm shocks with these Factory Team precision pistons from Team Associated. The #91934 2x1.8mm shock pistons are designed with a 2.5mm thickness for added tuning flexibility and smoother damping response—perfect for racers fine-tuning their suspension on high-traction surfaces.📦 Includes: (2) FT 13mm Shock Pistons – 2x1.8mm hole layout 2.5mm thick ⚙️ Key Features: CNC-machined precision for consistent performance 13mm piston design fits Team Associated’s latest shocks Ideal for carpet, astro, or high-grip clay tracks Designed for RC10B6.4, RC10B74.2, and other AE vehicles using 13mm shocks 📌 Tuning Tip: Smaller holes (1.8mm) and thicker pistons increase pack and slow down shock speed, which is great for improved control on high-traction tracks or smoother landings. Let me know if you'd like a matching version for other piston sizes or to bundle with 13mm shock sets!

Read more less

Overview:Boost suspension precision and durability with the Team Associated RC10B7 Aluminum Arm Mount "C Block". CNC-machined from high-quality aluminum, this upgrade improves rigidity in the rear suspension, keeping hinge pins aligned under extreme racing loads. With its blue anodized finish and Factory Team quality, it’s a reliable upgrade over the stock composite mount for racers who demand consistency and strength. Features: Precision CNC-machined aluminum construction Stronger and more rigid than stock composite mounts Maintains accurate hinge pin alignment for consistent suspension geometry Blue anodized finish with Factory Team looks Genuine Team Associated Factory Team upgrade Compatibility: Team Associated RC10B7 1/10 2WD Buggy May also fit other B7-based platforms (verify with manual) Includes: (1) Aluminum Arm Mount "C Block" Part Number: 92432 ⚡ Pro Tip: Pair the Aluminum "C Block" with the Aluminum "D Block" (92433) for a fully reinforced rear suspension setup that maintains geometry through the toughest conditions.

Read more less

1up Racing Curved Glue Tips feature a steel tip which is easy to unclog for extended use. A single tip can last the life of a bottle of glue! Universal fit. For use with Thick viscosity CA glue. Package includes ten tips.

Read more less

Team Associated B6.1/B6.1D Rear Ballstud Mount (91775) Upgrade your suspension adjustability with the Team Associated B6.1/B6.1D Rear Ballstud Mount. This precision-machined part provides a secure mounting point for your rear camber links, allowing for fine-tuned handling and performance. Features: Precision-machined for accurate fit and alignment Provides stable mounting for rear camber link adjustments Durable construction for long-lasting performance Direct replacement for the stock rear ballstud mount Compatibility: Team Associated B6.1 Team Associated B6.1D Includes: (1) Rear Ballstud Mount Perfect for restoring or upgrading your buggy’s rear suspension geometry and tuning options.

Read more less