Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31389Maximum Spacing. Race-Ready Adjustability. The Team Associated 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers (31389) are ideal for making larger wheelbase and hub spacing adjustments on RC8B3 and RC8T3 series vehicles—or any platform that uses 3.5mm hinge pins. Durable and lightweight, these aluminum washers are a reliable tuning option for racers who want full control over rear-end geometry. ✅ Size: 7.8mm OD x 3.5mm ID x 2.0mm thick✅ Anodized blue 7075 aluminum – high strength, low weight✅ Designed for wheelbase and hub spacing adjustments✅ Compatible with 3.5mm hinge pin platforms✅ Pairs perfectly with 0.5mm and 1.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers Part #: 31389 💡 Pro Tip: Use thicker spacers like this to extend wheelbase for more high-speed stability or track-specific tuning.

Read more less

Team Associated 7.8x1.0mm Aluminum Bulkhead Ball Stud Washers – Blue (10) – Part 31385Wider Support. Precision Shimming. Race-Ready Tuning. The Team Associated 7.8x1.0mm Blue Aluminum Ball Stud Washers (31385) are ideal for bulkhead and arm mount shimming in both on-road and off-road 1/10 scale vehicles. With a larger outer diameter, these washers provide more surface area, perfect for critical suspension points where strength and consistency matter. ✅ Pack of 10 precision washers✅ 7.8mm outer diameter / 1.0mm thickness✅ Anodized blue aluminum – lightweight and durable✅ Ideal for bulkhead, arm mount, and ball stud adjustments✅ Common in off-road and on-road setups alike✅ Perfect fit for 1/10 scale race platforms 📦 Includes: (10) 7.8x1.0mm Blue Aluminum Ball Stud Washers Part #: 31385 💡 Pro Tip: Use these in areas where added washer surface area can prevent flex or part deformation over time.

Read more less

Team Associated Rear CVA Axle – 66mm (RC10B74) Restore or upgrade your B74 drivetrain. The ASC92207 66mm Rear CVA Axle is a precision-engineered replacement part designed specifically for the Team Associated RC10B74. Whether you're maintaining performance or rebuilding after wear, this axle ensures smooth power delivery and durability for competitive 1/10 4WD off-road racing. ⚙️ Features: 🛞 66mm length optimized for rear CVA driveshaft assemblies 🧰 Direct replacement for factory parts 💪 Hardened for strength and longevity under racing conditions 📦 Includes: (1) 66mm Rear CVA Axle ✅ Compatibility: Team Associated RC10 B74 Keep your B74 running smooth and race-ready with genuine Team Associated drivetrain components.

Read more less

Team Exalt X-Rated 2S 135C HVX LiHV LCG Shorty Battery (7.6V/5100mAh) High Voltage. Race Ready. ROAR Approved. Give your setup the edge it deserves with the Team Exalt X-Rated HVX LiHV Battery. Built for competition, this 7.6V 2S LCG pack combines advanced chemistry, low resistance, and Silicone Graphene tech for powerful, consistent output and longer cycle life. The hardcase shorty design makes it perfect for tight 1/10 chassis builds where balance and performance are critical. ⚙️ Features: ✅ 135C Continuous Discharge Rate for maximum punch ⚡ LiHV (7.6V) design for high-voltage performance 🧠 Silicone Graphene Technology for lower IR and longer life 🔌 5mm High-Amp Bullet Connectors included 🏁 ROAR Approved since Dec. 2024 – race legal and track ready 🧊 LCG Hardcase to fit snug in shorty-compatible chassis 📐 Specifications: Voltage: 7.6V (LiHV 2S2P) Capacity: 5100mAh Continuous Discharge: 135C Dimensions: 96 x 46 x 22.5mm (LxWxH) Weight: 210g (7.40oz) Connector Type: 5mm bullets Balance Plug: 2mm bullets Watt Hours: 38.8Wh Charge Rate: 1C Max Configuration: LCG Hardcase Shorty ROAR Approved ✅ 💥 Optimized for elite 1/10 scale racing in both off-road and on-road platforms.Stay cool, stay powerful — Exalt X-Rated gets you to the finish line faster.  

Read more less

1up Racing LowPro Bullet Plugs + Grips – The Perfect Pairing for Clean Power Delivery 🔥 Take your wiring to the next level with the 1up Racing LowPro Bullet Plugs and Grips — the ultimate combo for pro-level installs and unmatched reliability. Designed for all LiPo batteries with 5mm inputs, this duo ensures a secure connection, minimal resistance, and a factory-finished look. ⚡ The LowPro Plugs feature a deep solder recess for clean joints with 11–16 gauge wire, while the Grips slide snugly into place, providing clear terminal ID and a stylish silver outer ring for superior grip and aesthetics. ✨ Key Features: 🔩 LowPro 5mm Bullet Plugs – Oversized 6-point contact for secure, low-resistance connection🧲 Deep Solder Recess – Quick, easy soldering with any 11–16 AWG wire🎨 Grips with Color ID – Instantly identify positive/negative terminals💪 Textured Outer Ring – Superior grip and eye-catching finish⚙️ Universal Fit – Works with all LiPo batteries using 5mm bullet inputs 📦 What’s in the Box? ✔️ (2) 1up Racing LowPro 5mm Bullet Plugs✔️ (2) Color-Grip Caps (Red + Black) 📌 Tip: Use a couple drops of CA glue to secure the grips after install! 💡 Wired to Win – Upgrade to 1up LowPro Bullet Plugs + Grips Today!  

Read more less

1up Racing Curved Glue Tips feature a steel tip which is easy to unclog for extended use. A single tip can last the life of a bottle of glue! Universal fit. For use with Medium to Thick viscosity CA glue. Package includes ten tips.

Read more less

Overview:Upgrade your motor mounting hardware with the JConcepts 3x6mm Finnisher Titanium Motor Screws. Precision-machined from lightweight titanium, these screws are both strong and stylish—giving you reduced weight without sacrificing durability. Available in Blue (2549-1) or Black (2549-2) anodized finishes, they’re the perfect blend of function and looks for your high-end RC build. Features: Machined from premium titanium for maximum strength and reduced weight Available in anodized Blue or Black finishes Low-profile Finnisher head design for a sleek look M3 x 6mm size – ideal for motor mounting applications Includes 2 screws per package Compatibility: Fits most 1/10 scale motors and motor plates that require 3x6mm screws Commonly used across popular RC racing platforms (check your motor and chassis manual for exact fitment) Part Numbers: Blue – 2549-1 Black – 2549-2  

Read more less

🔥 Big Power. Small Footprint.The Team Exalt 110W Digital Soldering Iron packs serious heat in a travel-friendly design. With lightning-fast heat-up, digital precision, and a built-in safety shutoff, this is your go-to soldering tool whether you’re at the track or at the bench. ⚡ Features: 110W power output for rapid heat-up Digital display with °F/°C readout Auto safety shutoff & sleep timer Ceramic heater with platinum temp sensor Plug-and-play AC design—no base station needed Compact, portable, and ready to travel 💡 Built for RC racers, builders, and field techs who demand pro-level performance in a portable package.

Read more less

🔥 Pure Performance in Every Joint.Step up your soldering game with PUREFUSION™—the elite, lead-free solder designed for high-performance RC, drone, and electronics work. This Sn99.3Cu0.7 alloy delivers ultra-low resistance, superior flow, and a clean, consistent melt for pro-level connections every time. 🧪 Specs: Alloy: Sn99.3Cu0.7 (Lead-Free) Diameter: 1.0mm Flux Core: Rosin, No-Clean Melting Point: ~227°C Conductivity: Optimized for high-current, low-loss joints Residue: Minimal & non-corrosive 🛠️ Includes: 15g compact travel tube – ideal for pit bags, toolboxes, and field kits 💡 Why PureFusion? Ultra-low oxidation Superior wetting & flow Designed for clean, professional results—no mess, no compromise 💥 Whether you're rewiring on the bench or fixing in the field, PUREFUSION keeps your connections solid and your builds clean.  

Read more less

Team Associated RC10T6.2 Carbon Fiber +1mm Steering Arm (2) – 71144Upgrade your steering precision with these lightweight +1mm carbon fiber arms from Team Associated. Originally made for the RC10T6.2, but may also fit newer models (check compatibility). ✅ Carbon Fiber Construction – Lightweight and durable✅ +1mm Offset – Provides fine-tuned steering response✅ Direct Replacement – Easy bolt-on upgrade 📦 Includes:(2) +1mm Carbon Fiber Steering Arms Perfect for racers looking to sharpen handling and dial in front-end feel.

Read more less

Team Associated T6.1/SC6.1 Front Anti-Roll Bar Set [71128] 🌀 Dial in your handling with confidence! This Front Anti-Roll Bar Set is designed for the Team Associated T6.1 and SC6.1, helping reduce chassis roll and boost stability when the grip is high and the corners are tight. Whether you're fine-tuning for race day or upgrading for performance, this set has your front-end covered. ✅ Reduces chassis roll on high-traction tracks✅ Improves cornering response and overall stability✅ Works with Roll Bar Hardware Set ASC71134 (sold separately) Includes:• (1) 1.2mm White Front Anti-Roll Bar• (1) 1.3mm Gray Front Anti-Roll Bar• (1) 1.4mm Blue Front Anti-Roll Bar 📦 Part Number: 71128🏁 Brand: Team Associated

Read more less

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31388Dial In Wheelbase. Precision You Can Stack. The Team Associated 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers (31388) are a smart tuning tool for adjusting wheelbase and hub spacing on RC8B3, RC8T3, and any 1/8 vehicle using 3.5mm hinge pins. These durable, lightweight aluminum spacers help you fine-tune geometry for track conditions or personal preference. ✅ Size: 7.8mm OD x 3.5mm ID x 1.0mm thick✅ CNC-machined blue anodized aluminum – race-grade durability✅ Used for hub spacing and wheelbase tuning✅ Fits RC8B3, RC8T3, and any vehicle with 3.5mm hinge pins✅ Perfect for stacking with .5mm or 2.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers Part #: 31388 💡 Pro Tip: Fine-tuning wheelbase can impact rear grip, stability, and overall cornering behavior—stack accordingly for your surface.  

Read more less

Team Exalt Phoenix 13.5T Gold Spec Brushless Motor – Offroad Carpet Version📦 Part #: EXA01135GSC Engineered for dominance on high-grip surfaces, the Phoenix 13.5T Gold Spec is the pinnacle of Team Exalt’s brushless motor line. Purpose-built for competitive offroad carpet racing, this motor is hand-built, precision-tuned, and Motolyser-verified to deliver maximum efficiency, speed, and consistency. 🏆 Gold Spec / Specialized Version Highlights: 💎 Top % Stator & Rotor from production batch 🧲 Sensor Deviation Guaranteed ≤ 1.0° ⚙️ Grade 10 Ceramic Bearings (metal shielded) 📊 Motolyser Tuned & Printout Included ✅ Sealed with Team Exalt Gold Spec Certification 🛠️ Technical Features: Designed for 1/10 Scale Offroad Carpet Racing CNC-machined 7075 Aluminum Two-Piece Can 90° Solder Tabs for cleaner and more secure wiring Infinite Timing Adjustability for race-specific tuning Thermal Epoxy-Filled Stator enhances heat dissipation Ultra-Rare Earth Magnet Formula resists heat and maintains magnetic strength under stress EXAS2305 Rotor installed Replaceable Sensor Board High Purity Copper Windings High-Heat-Resistant Materials throughout construction Rebuildable Design to extend motor life ROAR Approved for sanctioned events 📦 Includes: (1) Phoenix 13.5T Gold Spec Motor (EXA01135GSC) (1) Motolyser Printout Sheet Gold Spec Seal (Factory Installed) 🔧 Application-Specific Tuning:Gold Spec motors are built and tuned based on intended use—factoring in size, surface type, and climate. Minor final adjustments may still be needed to fine-tune performance for your exact conditions. 🔥 Whether you're club racing or chasing the podium at nationals, the Phoenix Gold Spec delivers world-class performance right out of the box.

Read more less

Unleash extreme power and efficiency with the Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery. Engineered for competitive RC racing, this pack combines massive capacity, ultra-low internal resistance, and a high 140C discharge rate to deliver stable voltage, explosive acceleration, and unmatched endurance. Perfect for racers who demand consistent performance through the entire run. 🔥 Key Features: High Voltage (LiHV) 7.6V output for maximum speed and power 140C continuous discharge for exceptional punch and consistency 8500mAh capacity delivers long runtime and balanced weight Factory-matched cells for uniform voltage, capacity, and resistance Low IR design ensures stable voltage under heavy load 5mm bullet connectors provide secure, low-loss connections Built using stable automatic stacking technology for reliability Lightweight and low-profile design for chassis balance and fit 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 8500mAh Continuous Discharge: 140C Charge Rate: 1C (8.5A max recommended) Configuration: 2S1P Watt Hours: 64.4Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 139 × 47 × 25mm Weight: 10.65oz (302g) ✅ Compatibility: Ideal for 1/10 & 1/8 scale surface applications Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher racing platforms Works with Touring Car (TC6/TC7 series), 4WD Buggies, Truggies, and Short Course Trucks requiring 2S packs 📦 Includes: (1) Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always balance charge using a LiPo-compatible charger and LiPo safe bag. Never leave charging batteries unattended. Do not overcharge or discharge below 3.2V per cell. Allow batteries to cool completely before recharging. Follow proper break-in procedure for new packs (first 5 cycles at 50% discharge). 🏎️ Recommended For: 1/10 & 1/8 scale Buggy, Truggy, Touring Car, and Short Course Truck racing Ideal for spec and modified classes needing high voltage and long runtime

Read more less

Experience uncompromising power and consistency with the Gens Ace Redline 2.0 2S Shorty LiHV Battery. Designed for high-performance racing, this pack delivers exceptional punch, low internal resistance, and stable voltage from start to finish. Perfect for 1/10 scale off-road, on-road, and touring applications where balance and efficiency are critical. 🔥 Key Features: High Voltage (LiHV) 7.6V design for increased power output 140C discharge rate for explosive acceleration and sustained punch 5300mAh capacity delivers both power and endurance Factory cell matching ensures maximum performance and consistency Low internal resistance (IR) for stable voltage under load Compact shorty pack size for ideal chassis weight distribution 5mm bullet connectors for secure, low-resistance connections Built with stable automatic stacking technology and strict cell matching Lightweight and low-profile design for racing efficiency 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 5300mAh Continuous Discharge: 140C Charge Rate: 1C (5.3A max recommended) Configuration: 2S2P Watt Hours: 40.28Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 96 × 47 × 22.5mm Weight: 7.02oz (199g) ✅ Compatibility: Ideal for 1/10 scale off-road and on-road racing Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher chassis setups Compatible with Touring Car (TC6/TC7) platforms and other vehicles using 2S shorty packs 📦 Includes: (1) Gens Ace Redline 2.0 2S Shorty LiHV 5300mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always use a LiPo-compatible charger — never charge unattended. Always balance charge and use a LiPo Safe charging bag. Do not overcharge, over-discharge, or store above 35°C. Allow battery to cool before recharging after use. For best cycle life: charge fully before first use and discharge only 50% for first 5 cycles. 🏎️ Recommended For: 1/10 Scale Buggy, Stadium Truck, Short Course Truck, and Touring Car racing Perfect balance of voltage, runtime, and punch for both spec and modified classes

Read more less

1up Racing Curved Glue Tips feature a steel tip which is easy to unclog for extended use. A single tip can last the life of a bottle of glue! Universal fit. For use with thin viscosity CA glue. Package includes ten tips.

Read more less

Protect your workspace and make every cut count with the Excel Self-Healing Cutting Mat. Designed for hobbyists, crafters, and designers, this 18x24" mat features a self-healing surface that absorbs cuts from sharp tools, preserving the mat and extending its life. With a 1" grid pattern for precise alignment and durable flexible PVC construction, it’s a must-have for any serious project bench. 🟢 Key Features: Self-healing surface absorbs cuts and retains smoothness 1" grid pattern ensures accurate cuts and measurements Protects your workspace from blade damage Made from high-quality flexible PVC for long-term use Ideal for hobby, craft, design, and modeling projects 📐 Specifications: Size: 18" x 24" Material: Flexible PVC Color: Green Includes: (1) Cutting Mat 🛠️ A reliable, precision-friendly surface for every sharp project you take on.

Read more less

Team Associated RC10B74.1 Factory Team Aluminum Rear Hubs (Blue or Black) – 92270 / 92271Upgrade your B74.1 with these precision-machined Factory Team aluminum rear hubs! Whether you're after the slick anodized blue or stealthy black finish, these hubs deliver durability, style, and performance. Designed with dual set screws to eliminate play and keep your rear end locked in during intense racing action. Compatible with a wide range of Associated platforms including B74.1, B74.1D, T6.2, and SC6.2. ✔️ Available in Blue (92270) or Black (92271)✔️ CNC aluminum with laser-etched FT logo✔️ Dual set screw design for rock-solid mounting✔️ Direct replacement for ASC92267 hubs✔️ Fits multiple Associated platforms✔️ Weight: 8.5g each Built for racers who demand strength and consistency. 💪  

Read more less

Team Associated 13mm Rear Shock Spring (White/2.35lbs) (72mm) [71164]⚪ Land smoother. Drive sharper.These 13mm Rear Shock Springs in White (2.35 lbs/in) are made to fine-tune your T6.2 or SC6.2 suspension. Designed for 13mm shocks, they offer plush bump absorption with enough support for high-speed landings — exactly what you need for race-ready handling.💥 Features:✅ White rate: 2.35 lbs/in✅ Length: 72mm✅ Optimized for 13mm shock upgrades✅ Soft on bumps, strong on landings✅ Includes 2 springs📦 Part Number: 71164🏁 Brand: Team Associated

Read more less

Team Associated 13mm Rear Shock Spring (Green/2.20lbs) (72mm) [71163]🌿 Smooth rides, soft landings!Upgrade your T6.2 or SC6.2 with the 13mm Rear Shock Springs in Green (2.20 lbs/in). These 72mm springs are tuned for plush low-speed movement and firm high-speed impact absorption — ideal for maintaining grip while taming big jumps.💥 Features:✅ Green rate: 2.20 lbs/in✅ Length: 72mm✅ Engineered for 13mm shocks✅ Perfect balance of cushion and control✅ Includes 2 springs📦 Part Number: 71163🏁 Brand: Team Associated

Read more less

Team Associated 13mm Front Shock Spring (Grey/4.60lbs) (54mm) [71161]🛞 Dial in that perfect front-end feel!Upgrade your T6.2 or SC6.2 with the 13mm Front Shock Springs in Grey (4.60 lbs/in). At 54mm long, these springs are engineered for plush low-speed bump absorption and strong high-speed support. That means more grip, better landings, and next-level consistency lap after lap.💥 Features:✅ Grey rate: 4.60 lbs/in✅ Length: 54mm✅ Designed for 13mm bore shocks✅ Ideal balance of soft feel and responsive support✅ Includes 2 springs📦 Part Number: 71161🏁 Brand: Team Associated

Read more less

Team Associated 13mm Front Shock Spring (White/4.40lbs) (54mm) [71160]🛠️ Tuned for precision. Built for performance.Upgrade your T6.2 or SC6.2 with these 13mm Front Shock Springs and feel the difference! Rated at 4.40 lbs/in and measuring 54mm, these white springs deliver buttery-smooth handling with serious jump support. Soft in the corners, firm on impact—just how you want it.💥 Features:✅ White rate: 4.40 lbs/in✅ Length: 54mm✅ Designed for 13mm shocks✅ Optimized for balance between grip and control✅ Includes 2 springs📦 Part Number: 71160🏁 Brand: Team Associated

Read more less

Team Associated RC10 Factory Team 0.71 Gold Shock Shafts (2)PART: 6418 Team Associated RC10 Factory Team 0.71 Gold Shock Shafts are premium replacements designed specifically for the original RC10. These gold-coated shafts provide smooth performance and enhanced durability, ideal for restoring or upgrading your vintage racer. Includes: (2) 0.71 Gold Shock Shafts Compatibility: Team Associated RC10 (Original)    

Read more less

Team Associated 12mm Heavy Duty Ballstud Set (8) – Part 91050Maximum Strength. Extended Reach. Race Proven. The Team Associated 12mm Heavy Duty Ballstud Set (91050) is a direct replacement for SC10 4x4, B5, B5M, and other compatible platforms. With a longer 12mm thread length, these ballstuds are ideal for use in high-stress suspension and steering locations where extra bite and thread engagement are needed. ✅ Set of 8 heavy-duty 12mm ballstuds✅ OEM fit for SC10 4x4, B5, B5M, and more✅ Extra length (12mm) – for deeper mounting and improved strength✅ Precision-machined for smooth articulation and ball cup fit✅ Perfect for tuning camber links, steering arms, and shock setups 📦 Includes: (8) 12mm Heavy Duty Ballstuds Part #: 91050 💡 Pro Tip: Use longer ballstuds in plastic mounts or when adding spacers to maintain thread engagement and strength.

Read more less

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washers – Blue (10) – Part 31387Fine-Tune Wheelbase. Maximize Setup Precision. The Team Associated 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers (31387) are perfect for adjusting wheelbase and tuning suspension geometry on vehicles with 3.5mm hinge pins. Commonly used on the RC8B3 and RC8T3 series, these lightweight spacers are also compatible with other platforms that accept 3.5mm hinge pins. ✅ Pack of 10 high-precision spacers✅ Size: 7.8mm OD x 3.5mm ID x 0.5mm thick✅ Blue anodized aluminum – lightweight and corrosion-resistant✅ Used for fine-tuning wheelbase and hub spacing✅ Compatible with RC8B3, RC8T3, and any vehicle using 3.5mm hinge pins✅ Also available in 1.0mm and 2.0mm thicknesses (sold separately) 📦 Includes: (10) 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers Part #: 31387 💡 Pro Tip: Stack different thicknesses to get the exact rear end length or toe-in setup you're after.

Read more less

Team Associated Factory Team 15.5mm Aluminum 23 Tooth Servo Horn. This is an optional servo horn designed for the RC10 B6 and B6D 1/10 buggies. 23T fits KO Propo, JR, Sanwa & Airtronics servos. COMPATIBILITY: Team Associated RC10 B6 Team Associated RC10 B6.1 Team Associated RC10 B6.1 Factory Lite Team Associated RC10 B6.1D Team Associated RC10 B6.2 Team Associated RC10 B6.2D Team Associated RC10 B6D Team Associated RC10 SC6.1

Read more less

Team Associated FT 3x35mm V2 TiN Shock Shafts – ASC91623 High-Performance Titanium Nitride Shock Shafts for #91579 Upgrade your suspension system with the 3x35mm Factory Team V2 TiN Shock Shafts, designed for use with #91579 truck rear shock bodies. Featuring a durable Titanium Nitride (TiN) coating, these shafts reduce friction and wear, delivering smoother and more consistent shock performance. ⚙️ Features: ✅ TiN coating for enhanced durability and ultra-smooth operation ✅ Screw-mounted piston design for secure, reliable assembly ✅ V2 shock shaft spec for modern Team Associated platforms 📦 Includes: (2) 3x35mm V2 TiN Shock Shafts ✅ Compatibility: #91579 – Truck Rear Shock Bodies Not compatible with E-clip pistons 🏁 Trusted Factory Team engineering — made to withstand the rigors of high-performance RC racing.

Read more less

Team Associated FT 3x21mm V2 Chrome Shock Shafts – ASC91616 Precision Replacement for Ultra-Smooth Suspension The Factory Team 3x21mm V2 Chrome Shock Shafts are designed as high-quality replacements for use with the #91576 V2 shock bodies. Built with durability and performance in mind, these shafts feature a chrome finish to reduce friction and wear—delivering smooth and consistent suspension action on every run. ⚙️ Features: ✅ Chrome-plated for reduced friction and long wear life ✅ Factory Team quality for high performance ✅ Designed for use with V2 shock bodies ✅ Direct fit for #91576 📦 Includes: (2) 3x21mm V2 Chrome Shock Shafts ✅ Compatibility: Fits #91576 V2 Shock Bodies Vehicles using #91576 shocks (check vehicle manual for confirmation) 🏁 Keep your suspension running smooth and race-ready with Factory Team precision!

Read more less

1up Racing UltraLite 3 Wire Organizer – Clean Wiring, Zero Compromise ⚡ Tidy up your electronics like a pro with the 1up Racing UltraLite 3 Wire Organizer — the perfect blend of style and performance for your wiring setup. Whether you're refreshing your race rig or building from scratch, this lightweight aluminum organizer delivers a clean look without the bulk. 💨 At just 0.59g, it’s engineered to keep things neat without adding drag or weight, making it ideal for serious racers who care about every gram. ✨ Key Features: 🎯 Fits 12–14 AWG Wires – Compatible with wire diameters up to 4.1mm OD🪶 Featherweight Design – Weighs only 0.59g to keep your ride light and fast💎 Anodized Aluminum Finish – Durable, sleek, and track-ready🔌 Organized & Secure – Prevents tangled wires and boosts air circulation📐 Ultra-Clean Aesthetic – Show-quality wiring made easy 📦 What’s in the Box? ✔️ (1) UltraLite 3 Wire Organizer (Anodized Aluminum)

Read more less