Power your race machine with the Reedy Zappers HV SG6 Ultra Low Profile 2S LiPo Battery. Built for the demands of competitive RC, this pack delivers lightning-fast discharge, superior voltage retention, and rock-solid durability to keep you at peak performance lap after lap. ✅ Ultra Low Profile Design – Lowers center of gravity for sharper handling✅ 135C High Discharge Rating – Delivers extreme power output for racing applications✅ Flat Discharge Curve – Maintains consistent voltage through the entire run✅ State-of-the-Art Chemistry – Reduced internal resistance and improved cycle life✅ Meets Racing Standards – Built to ROAR, EFRA, BRCA, and IFMAR specifications Includes: (1) Zappers HV SG6 2S Ultra Low Profile 135C LiPo Battery (7.6V/6000mAh) 5mm Bullet Connectors Specifications: Nominal Voltage: 7.6V (2S HV LiPo) Capacity: 6000mAh Maximum Charge Rate: 2C (12A) Discharge Rate: 135C Peak Cell Configuration: 2S2P Watt Hours: 45.6Wh Connector: 5mm Bullet (battery), 2mm Bullet (balance) Dimensions (LxWxH): 139 x 47 x 19.5mm (5.47 x 1.85 x 0.77in) Weight: 247g (8.71oz) ROAR Approved: Yes ⚡ Take your racing to the next level with reliable power, ultra-low profile design, and championship-ready performance.

Read more less

Boost your steering accuracy and reliability with the Team Associated Factory Team Aluminum Clamping Servo Horn. Built for 23-tooth servos, this 20mm horn features a clamping design that locks securely in place, preventing slippage under high loads. Features: CNC-machined aluminum for superior strength and precision Clamping design ensures a secure, slip-free connection 20mm length for tuned steering leverage and response Fits 23T spline servos Factory Team quality for pro-level durability and performance Includes: (1) Aluminum Clamping Servo Horn – 23T, 20mm Ideal for racers who want maximum steering control and long-lasting reliability.

Read more less

This is a Reedy Flat Sensor Wire. The flat sensor wires that are included with the Reedy Sonic motor are now available separately in a variety of lengths to suit 1/10 and 1/8 applications! The flat design looks great and provides an extremely clean look. Choose from between 70mm and 270mm lengths.

Read more less

Team Associated 13mm Front Shock Spring (Grey/4.60lbs) (54mm) [71161]🛞 Dial in that perfect front-end feel!Upgrade your T6.2 or SC6.2 with the 13mm Front Shock Springs in Grey (4.60 lbs/in). At 54mm long, these springs are engineered for plush low-speed bump absorption and strong high-speed support. That means more grip, better landings, and next-level consistency lap after lap.💥 Features:✅ Grey rate: 4.60 lbs/in✅ Length: 54mm✅ Designed for 13mm bore shocks✅ Ideal balance of soft feel and responsive support✅ Includes 2 springs📦 Part Number: 71161🏁 Brand: Team Associated

Read more less

  Upgrade your slipper clutch with the Team Associated 19mm Octalock Slipper Pad. Featuring the Octalock design, this pad offers improved consistency, smoother power delivery, and longer-lasting performance compared to standard slipper pads. ✅ Octalock Design – Delivers smoother engagement and improved slipper consistency✅ Durable Material – Built to handle high power and repeated use✅ Direct OEM Replacement – Genuine Team Associated part for perfect fitment Includes: (1) 19mm Octalock Slipper Pad Compatibility: Team Associated vehicles equipped with 19mm Octalock spur gears and slipper assemblies (B6.2, B6.3, B6.4, T6.2, T6.4, SC6.2, SC6.4, and B74 series) Check your manual for exact fitment Part #: 92288

Read more less

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31389Maximum Spacing. Race-Ready Adjustability. The Team Associated 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers (31389) are ideal for making larger wheelbase and hub spacing adjustments on RC8B3 and RC8T3 series vehicles—or any platform that uses 3.5mm hinge pins. Durable and lightweight, these aluminum washers are a reliable tuning option for racers who want full control over rear-end geometry. ✅ Size: 7.8mm OD x 3.5mm ID x 2.0mm thick✅ Anodized blue 7075 aluminum – high strength, low weight✅ Designed for wheelbase and hub spacing adjustments✅ Compatible with 3.5mm hinge pin platforms✅ Pairs perfectly with 0.5mm and 1.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers Part #: 31389 💡 Pro Tip: Use thicker spacers like this to extend wheelbase for more high-speed stability or track-specific tuning.

Read more less

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washers – Blue (10) – Part 31387Fine-Tune Wheelbase. Maximize Setup Precision. The Team Associated 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers (31387) are perfect for adjusting wheelbase and tuning suspension geometry on vehicles with 3.5mm hinge pins. Commonly used on the RC8B3 and RC8T3 series, these lightweight spacers are also compatible with other platforms that accept 3.5mm hinge pins. ✅ Pack of 10 high-precision spacers✅ Size: 7.8mm OD x 3.5mm ID x 0.5mm thick✅ Blue anodized aluminum – lightweight and corrosion-resistant✅ Used for fine-tuning wheelbase and hub spacing✅ Compatible with RC8B3, RC8T3, and any vehicle using 3.5mm hinge pins✅ Also available in 1.0mm and 2.0mm thicknesses (sold separately) 📦 Includes: (10) 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers Part #: 31387 💡 Pro Tip: Stack different thicknesses to get the exact rear end length or toe-in setup you're after.

Read more less

Team Associated FT 3x35mm V2 TiN Shock Shafts – ASC91623 High-Performance Titanium Nitride Shock Shafts for #91579 Upgrade your suspension system with the 3x35mm Factory Team V2 TiN Shock Shafts, designed for use with #91579 truck rear shock bodies. Featuring a durable Titanium Nitride (TiN) coating, these shafts reduce friction and wear, delivering smoother and more consistent shock performance. ⚙️ Features: ✅ TiN coating for enhanced durability and ultra-smooth operation ✅ Screw-mounted piston design for secure, reliable assembly ✅ V2 shock shaft spec for modern Team Associated platforms 📦 Includes: (2) 3x35mm V2 TiN Shock Shafts ✅ Compatibility: #91579 – Truck Rear Shock Bodies Not compatible with E-clip pistons 🏁 Trusted Factory Team engineering — made to withstand the rigors of high-performance RC racing.

Read more less

🔌⚡ Clean Wiring. Reliable Signal. Low-Profile Design. The ProTek RC Flat Sensor Wire is designed to provide consistent, interference-free communication between your sensored brushless motor and ESC. With a slim, flat design, it keeps your build clean while improving wire routing in tight chassis layouts. 🏁 About This Sensor Wire 📏 Clean, Low-Profile Routing The flat cable design allows easy routing under components and through tight spaces, reducing clutter and improving overall build appearance. ⚡ Reliable Signal Transfer Engineered for consistent, interference-resistant communication, ensuring smooth motor performance in sensored brushless setups. 🎯 Perfect Fit Length At 150mm, this cable is ideal for a wide range of 1/10 scale applications and clean electronics layouts. 🔧 Key Features ✔ Low-profile flat cable design✔ Reliable signal transfer for sensored systems✔ Slim construction for easy routing✔ Helps reduce wiring clutter✔ Interference-resistant performance✔ Optimized for brushless motor/ESC communication 📦 Includes (1) Flat Sensor Wire (150mm) 📊 Specifications Length: 150mm 🧰 Recommended Use Sensored brushless motor to ESC connection Clean electronics installations Organized wiring setups  

Read more less

🧵🔧 Clean Mounting. Strong Hold. Easy Access. The ProTek RC Body Mounting Hook & Loop Tape provides a simple, reliable solution for securing RC bodies and accessories. With a full 1-meter length, you can cut exactly what you need for a clean, custom setup. 🏁 About This Tape ✂️ Fully Customizable Supplied in a 1-meter length, this tape can be cut to fit any application—from body mounting to accessory placement. 🔒 Secure & Reliable Hold The hook and loop design keeps bodies and components firmly in place, even under demanding conditions. 🔄 Quick Removal Easily remove your body for maintenance or battery changes without dealing with clips or hardware. 🔧 Key Features ✔ 1-meter length for custom applications✔ Strong hook & loop fastening system✔ Secure hold for RC bodies and accessories✔ Allows quick and easy removal✔ Ideal for clean, clipless setups✔ Versatile for multiple RC uses 📦 Includes (1) Hook & Loop Tape (1 Meter Length) 🧰 Recommended Use Body mounting (clipless setups) Securing electronics or accessories Custom RC builds and modifications    

Read more less

🏁 Clean Look. Lightweight Upgrade. Precision Fit. Upgrade your sway bar setup with this R1WURKS aluminum hardware set, designed to replace the stock components with a lightweight, blacked-out look and precise fit. 🏁 About the Sway Bar Hardware Set ⚙️ Lightweight & Durable Machined from high-strength 7075-T6 aluminum, these components offer a solid balance of durability and reduced weight. 🎯 Precision Fit CNC machining ensures accurate fitment and smooth operation, helping maintain consistent sway bar performance. 🖤 Clean, Blacked-Out Style Finished in matte black anodizing with subtle R1 laser-etched branding for a sleek, professional appearance. 🔧 Key Features ✔ 7075-T6 aluminum construction✔ Precision CNC-machined components✔ Matte black anodized finish✔ Laser-etched R1 branding✔ Lightweight sway bar balls✔ Direct replacement upgrade 📦 Includes (2) Sway Bar Bearing Collars (2) Sway Bar Balls (4) M3x3 Set Screws 🚗 Compatibility Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated RC10 B84 Team Associated RC10 B84D Team Associated RC10 B7 Team Associated RC10 B7D 🏁 Simple upgrade. Clean look. Dialed performance.  

Read more less

Keep your drivetrain running smoothly with the Team Associated 54T Idler Gear for the 3-gear gearbox. This replacement idler gear is designed for RC10B7, RC10T7, and RC10SC7 platforms, delivering reliable power transfer and consistent performance. Precision molded for proper mesh and durability, this gear is ideal for replacing worn or damaged components to maintain drivetrain efficiency and smooth operation. 🔧 Features:• Replacement 54T idler gear for 3-gear gearbox• Designed for RC10B7, RC10T7, and RC10SC7 platforms• Precision molded for smooth gear mesh• Durable construction for long-lasting performance• Ideal maintenance or replacement part 📦 Includes:• (1) 3-Gear Gearbox Idler Gear ⚙️ Specifications:• Tooth Count: 54T• Gearbox Type: 3-Gear• Position: Idler Gear Keep your drivetrain dialed in with the Team Associated 54T idler gear, built for smooth performance and dependable durability.    

Read more less

Built for competitive stock racing, the ProTek RC 2S 150C “Stock Spec” Shorty LiPo delivers consistent power, low internal resistance, and excellent efficiency from start to finish. Featuring advanced Si-Graphene cell technology, this pack provides strong punch, cooler operating temps, and reliable voltage throughout the entire run. The shorty-style design is perfect for modern 2WD and 4WD setups, offering improved weight distribution and flexibility in chassis tuning. With increased capacity and extended cycle life, this battery is a top choice for racers who demand consistent performance every lap. 🔧 Features:• 150C discharge rating for strong power and punch• Advanced Si-Graphene technology for low IR and efficiency• 5600mAh capacity for extended runtime• Shorty pack design for improved weight balance and setup options• Runs cooler with lower internal resistance• Designed for stock class racing performance• ROAR Approved for competition use 📦 Includes:• (1) ProTek RC 2S Shorty LiPo Battery• (2) 5mm Bullet Connectors ⚙️ Specifications:• Voltage: 7.4V (2S)• Capacity: 5600mAh• Discharge Rate: 150C• Max Charge Rate: 10C (56A)• Watt Hours: 41.44Wh• Connector: 5mm Bullet• Balance Plug: 2mm Bullet• Dimensions: 95.7 x 47.1 x 25.1mm• Weight: 224g (7.90oz) ⚠️ Battery Safety Notes:• Always use a LiPo-compatible charger• Balance charge only and never leave charging unattended• Do not overcharge or over-discharge (min 3.2V per cell)• Allow battery to cool before recharging• Use a LiPo safe charging bag or box For racers who need reliable power and consistent performance, the ProTek RC 150C Stock Spec Shorty LiPo delivers the voltage, efficiency, and durability to stay competitive from the first lap to the last.  

Read more less

Get clean, reliable solder joints every time with the ProTek RC Premium Rosin Core Solder 60/40. Designed for RC electronics and precision work, this solder features a classic 60/40 tin-to-lead blend that delivers smooth flow, excellent conductivity, and easy handling for everything from simple repairs to full custom builds. The integrated rosin core flux promotes strong bonding and clean joints by improving wetting action and reducing oxidation. Whether you're soldering connectors, wiring, or electronics, this solder provides consistent, professional-quality results. 🔧 Features:• 60/40 tin-to-lead blend for reliable performance• Rosin core flux for clean, strong solder joints• Smooth flow for easy and precise application• Excellent electrical conductivity• Helps reduce oxidation and improve bonding• Ideal for RC wiring, connectors, and electronics 📦 Includes:• (1) ProTek RC Premium Rosin Core Solder 60/40 (12g) ⚙️ Specifications:• Weight: 12g• Type: Rosin Core Solder• Composition: 60/40 Tin/Lead Perfect for builders and racers alike, the ProTek RC 60/40 solder delivers dependable performance and clean results for all your RC electronics work.  

Read more less

Keep your bearings spinning smoother and lasting longer with R1WURKS DOPE Double Ceramic Long Life Bearing Lube. Specially developed for high-performance RC applications, this advanced lubricant helps reduce friction, improve efficiency, and extend the life of your bearings under demanding racing conditions. Formulated with double ceramic technology, this premium bearing oil penetrates deeply into bearings to deliver smooth rotation and consistent performance lap after lap. ⚙️ Advanced Bearing Protection The ceramic-enhanced formula reduces friction and heat buildup inside the bearing, allowing for smoother operation and improved drivetrain efficiency. It also helps protect bearings from wear, contamination, and moisture. 🏁 Built for Racing Performance Designed for racers who demand maximum efficiency, DOPE bearing lube helps maintain free-spinning bearings and consistent performance, which can translate to better acceleration, improved drivetrain efficiency, and longer component life. ⚡ Features Premium double ceramic bearing lubricant Reduces friction and heat inside bearings Helps extend bearing lifespan Improves drivetrain efficiency and smoothness Penetrates bearings for long-lasting lubrication Ideal for RC cars, trucks, and other high-speed applications 📦 Includes (1) 10ml Bottle of R1WURKS DOPE Double Ceramic Bearing Lube A great maintenance product for keeping your RC bearings running smooth, efficient, and protected during intense racing conditions.  

Read more less

Built for national-level competition, the Trinity Slot Machine 2 Certified 13.5T Brushless Motor delivers elite performance, precision throttle control, and race-proven consistency. Each certified motor is hand-selected for top performance and includes a dyno sheet verifying peak output, giving racers confidence in their equipment right out of the box. Designed for competitive stock-class racing, this sensored motor provides smooth power delivery and excellent efficiency on the track. 🏁 Competition-Level Performance The Slot Machine 2 motor features a precision sensored design that ensures smooth throttle response and predictable power delivery. This makes it ideal for tight, technical tracks where consistent control and acceleration are critical. A highly machined aluminum motor can reduces weight while dramatically improving heat dissipation, helping maintain performance during long mains and qualifying heats. ⚙️ Tunable & Race Ready The motor includes a tunable endbell with laser-etched timing marks, making timing adjustments quick, precise, and repeatable for racers dialing in their setup. Each certified version is hand selected and dyno tested, ensuring it meets Trinity’s top performance standards. ⚡ Features Certified hand-selected high-performance motor Includes dyno sheet verifying peak performance Sensored brushless design for smooth throttle response Lightweight heavily machined aluminum motor can Improved cooling and heat dissipation Adjustable timing with laser-etched endbell markings Designed for high-level competition racing ROAR approved for sanctioned events 📦 Includes (1) Trinity Slot Machine 2 Certified Brushless Motor (13.5T) Dyno performance readout Designed for racers who want proven dyno-tested performance and championship-level reliability, the Trinity Slot Machine 2 Certified motor is built to perform when it matters most.

Read more less

Upgrade your rear suspension with genuine Factory Team Carbon Rear Suspension Arms for the RC10T7 and RC10SC7 platforms. Designed for racers who demand precision and consistency, these arms increase rigidity and reduce flex under high-load conditions, giving you a more predictable and controlled feel on the track. Built using AE’s legendary carbon composite material, they offer the perfect balance of strength, durability, and lightweight performance — exactly what competitive racing requires. Features Factory Team performance upgrade Constructed from AE carbon composite material Increased rigidity over stock arms Reduces flex under hard cornering and acceleration Enhances durability and structural integrity Improves overall handling consistency Includes (2) Rear Factory Team Carbon Suspension Arms Designed specifically for: RC10T7 RC10SC7 A race-proven upgrade that delivers stronger, more consistent rear-end performance when it matters most. 🏁  

Read more less

Strengthen your chassis and reduce front-end tweak with the Vision Racing (VR) Carbon Chassis Standoff Brace Set. Designed for carbon fiber chassis platforms, this upgrade adds rigidity where it matters most while keeping weight low and looks clean. Featuring dual-mounting aluminum standoffs, this brace helps stabilize the front section of the chassis under load, improving consistency and feel—especially on high-grip tracks and during hard landings. Features & Benefits: Reduces front-end chassis tweak Adds rigidity to carbon fiber chassis Dual-mount aluminum standoffs for strength and stability Lightweight, race-focused design Clean, stylish finish that complements carbon chassis builds Compatibility: Team Associated B7 Team Associated B7D Team Associated T7 Team Associated SC7 Includes: Carbon chassis standoff brace set with aluminum standoffs A solid first impression from Vision Racing—functional, clean, and built for racers looking to tighten up their chassis performance.  

Read more less

The ProTek RC Braided Brushless Motor Sensor Cable is a premium replacement sensor wire designed for sensor-based brushless motor systems that use removable sensor harnesses. Built for reliability and durability, this cable ensures clean, consistent signal transfer between your ESC and motor—race after race. Why You’ll Want It This cable uses individual silicone-shielded sensor wires wrapped in a black braided nylon sleeve, giving it excellent flexibility while protecting against abrasion, vibration, and shock. Shrink-wrapped ends keep everything secure and tidy, making it ideal for high-performance racing environments where reliability matters most. Features Compatible with most sensor-based brushless ESC & motor systems Individual silicone-shielded sensor wires for flexibility Braided nylon outer sheath for abrasion and impact protection Shrink-wrapped ends for durability and clean routing Smooth, reliable data transfer between ESC and motor Lightweight and race-proven design Specifications Length: 90mm Part Number: PTK-2107 Type: Brushless Motor Sensor Cable Wire Protection: Braided nylon sleeve with silicone-shielded internal wires Perfect for racers looking to replace a worn sensor wire or upgrade to a more durable, track-ready option that won’t hold your electronics back.

Read more less

The Team Associated B6 Front Hinge Pin Brace is a genuine replacement part designed to restore strength and alignment to the front suspension of your RC10 platform. Precision-molded for a direct factory fit, this brace securely holds the front hinge pins in place, helping maintain consistent suspension geometry and reliable handling. Ideal for maintenance, rebuilds, or replacing damaged components after hard racing or bashing, this hinge pin brace installs easily and keeps your front end tight and predictable. Features: Genuine Team Associated replacement part Maintains proper front suspension alignment Durable construction for racing and off-road use Direct drop-in fit with no modifications required Includes: (1) Front Hinge Pin Brace Compatibility: Team Associated RC10B6 Team Associated RC10B6D Team Associated RC10B6.1 Team Associated RC10B6.1 Factory Lite Team Associated RC10B6.1D Team Associated RC10B6.2 Team Associated RC10B6.2D Team Associated RC10B6.3 Team Associated RC10B6.3D Team Associated RC10B6.4 Team Associated RC10B6.4D Team Associated RC10 SC6.1 Team Associated RC10 T6.1

Read more less

Replace worn or damaged rear protection with the Team Associated SC6.1 Rear Bumper Assembly. Designed as a direct factory replacement, this rear bumper restores proper protection and fitment for your short course truck after hard racing or bashing sessions. This kit includes all required plastic components needed to assemble one complete rear bumper, making it an easy, hassle-free replacement. Features Genuine Team Associated replacement part Direct factory-spec fit Restores rear-end protection and durability Ideal for repairs, rebuilds, or spares Compatibility Team Associated RC10 SC6.1 Team Associated RC10 SC6.2 Includes Rear bumper plastic parts to assemble one complete bumper

Read more less

Dial in your setup with absolute confidence! The 1UP Racing Pro Pit Scale delivers ultra-fine accuracy, making it the perfect tool for weighing parts, tires, diffs, hardware, and more. Whether you're chasing consistency, balancing components, or fine-tuning for race day, this compact powerhouse gives you the precision trusted by top-level racers. Engineered with a 0.01g resolution, 500g capacity, and a crisp blue backlit LCD, the Pro Pit Scale is built for serious tuning in any pit environment. A stainless steel weighing platform, laser-etched branding, and a protective cover complete the professional-grade feel. Key Features: ✔️ 0.01g Precision – High-resolution measurement for pro-level tuning✔️ 500g Capacity – Perfect for tires, diffs, hardware, and small components✔️ Stainless Steel Platform – Durable, stable, and easy to clean✔️ Blue Backlit LCD – Clear visibility in any lighting✔️ Laser-Etched 1UP Logos – Clean, premium aesthetic✔️ 9 Weighing Modes – Versatile for all hobby and workshop uses✔️ Full-Capacity Tare Range – Zero out trays or containers instantly✔️ Protective Cover & Parts Tray Included – Ready for pit bench or travel Includes: (1) 1UP Racing Pro Pit Scale (2) AA Batteries (1) Protective Cover / Parts Tray Specifications: Capacity: 500g (17.637oz) Resolution: 0.01g (0.00035oz) Overall Size: 5 × 4.17 × 0.74 in (127 × 106 × 19mm) Platform Size: 3.93 × 3.93 in (100 × 100mm)

Read more less

Upgrade your suspension precision with the AVID 13mm Ringer Shock Collar Kit, engineered to let you run 13mm springs on multiple shock platforms including Team Associated 13mm, TLR G3/3.5, and Schumacher LD3/L1R. Crafted for racers who demand accuracy and consistency, these collars feature offset laser-etched AVID logos that allow you to match spring tension left-to-right in clean ¼-turn increments. Machined with AVID’s signature silver ringer highlight, these collars not only perform—they look pro doing it. Features Compatible with 13mm springs across popular racing platforms Fits: AE 13mm, TLR G3/3.5, Schumacher LD3/L1R shock bodies Offset laser-etched AVID logos for easy visual alignment Allows perfect ¼-turn spring tension adjustments Internal o-ring design keeps collars firmly in place Signature silver ringer machining for premium finish Works great with AE V3, XRAY, and 1UP 13mm springs Tips Spring cups are not included.Recommended options:• AE 13mm Spring Cups – ASC91966• AE 12mm Spring Cups – ASC91814 (compatible with some setups) Includes (4) AVID 13mm Shock Collars (4) Internal O-Rings (pre-installed)  

Read more less

The 1RC Racing 1/18 Servo Extension Wire is a direct replacement part designed for the 1RC Racing 1/18 chassis lineup. Perfect for extending servo reach or cleanly routing wires through your setup, this high-quality extension ensures a secure, low-resistance connection between components. ⚙️ Features: Genuine 1RC Racing replacement part 100mm length for flexible installation Durable, high-quality wire construction for reliable signal transfer Ideal for clean wire management on your 1/18 scale setup 📦 Includes: (1) 1RC Racing 1/18 Servo Extension Wire (100mm)  

Read more less

Stronger. Stiffer. Race-Ready. Upgrade your steering and camber links with the Team Associated 3.5x48 mm Steel Turnbuckles — a precision-built Factory Team option for racers who demand maximum strength and reliability. Perfect for high-stress race conditions, these heavy-duty steel links add confidence to every corner and landing. Performance Upgrade Designed to replace standard turnbuckles on the RC10B6, RC10T6, and RC10SC6 platforms, this 3.5 mm version provides added stiffness and durability when used with 3.5 mm ballcups (92308). The result is tighter handling, smoother steering response, and reduced flex over time — a must-have for competitive racers and bashers alike. Features: Heavy-duty 3.5 mm steel construction for extreme strength Increased stiffness for consistent steering geometry Works with 3.5 mm ballcups (#92308) Ideal upgrade for high-traction and high-impact racing Factory Team precision fit and finish Includes: (2) 3.5 × 48 mm Steel Turnbuckles Compatibility: Team Associated RC10 B6 series Team Associated RC10 T6 series Team Associated RC10 SC6 series Team Associated Factory Team — Engineered to Win.

Read more less

Team Associated RC10T6.2 Carbon Fiber +1mm Steering Arm (2) – 71144Upgrade your steering precision with these lightweight +1mm carbon fiber arms from Team Associated. Originally made for the RC10T6.2, but may also fit newer models (check compatibility). ✅ Carbon Fiber Construction – Lightweight and durable✅ +1mm Offset – Provides fine-tuned steering response✅ Direct Replacement – Easy bolt-on upgrade 📦 Includes:(2) +1mm Carbon Fiber Steering Arms Perfect for racers looking to sharpen handling and dial in front-end feel.

Read more less

Team Associated 13mm Rear Shock Spring (Green/2.20lbs) (72mm) [71163]🌿 Smooth rides, soft landings!Upgrade your T6.2 or SC6.2 with the 13mm Rear Shock Springs in Green (2.20 lbs/in). These 72mm springs are tuned for plush low-speed movement and firm high-speed impact absorption — ideal for maintaining grip while taming big jumps.💥 Features:✅ Green rate: 2.20 lbs/in✅ Length: 72mm✅ Engineered for 13mm shocks✅ Perfect balance of cushion and control✅ Includes 2 springs📦 Part Number: 71163🏁 Brand: Team Associated

Read more less

Team Associated 13mm Front Shock Spring (White/4.40lbs) (54mm) [71160]🛠️ Tuned for precision. Built for performance.Upgrade your T6.2 or SC6.2 with these 13mm Front Shock Springs and feel the difference! Rated at 4.40 lbs/in and measuring 54mm, these white springs deliver buttery-smooth handling with serious jump support. Soft in the corners, firm on impact—just how you want it.💥 Features:✅ White rate: 4.40 lbs/in✅ Length: 54mm✅ Designed for 13mm shocks✅ Optimized for balance between grip and control✅ Includes 2 springs📦 Part Number: 71160🏁 Brand: Team Associated

Read more less

Team Associated T6.1/SC6.1 Front Anti-Roll Bar Set [71128] 🌀 Dial in your handling with confidence! This Front Anti-Roll Bar Set is designed for the Team Associated T6.1 and SC6.1, helping reduce chassis roll and boost stability when the grip is high and the corners are tight. Whether you're fine-tuning for race day or upgrading for performance, this set has your front-end covered. ✅ Reduces chassis roll on high-traction tracks✅ Improves cornering response and overall stability✅ Works with Roll Bar Hardware Set ASC71134 (sold separately) Includes:• (1) 1.2mm White Front Anti-Roll Bar• (1) 1.3mm Gray Front Anti-Roll Bar• (1) 1.4mm Blue Front Anti-Roll Bar 📦 Part Number: 71128🏁 Brand: Team Associated

Read more less

Team Associated FT 3x21mm V2 Chrome Shock Shafts – ASC91616 Precision Replacement for Ultra-Smooth Suspension The Factory Team 3x21mm V2 Chrome Shock Shafts are designed as high-quality replacements for use with the #91576 V2 shock bodies. Built with durability and performance in mind, these shafts feature a chrome finish to reduce friction and wear—delivering smooth and consistent suspension action on every run. ⚙️ Features: ✅ Chrome-plated for reduced friction and long wear life ✅ Factory Team quality for high performance ✅ Designed for use with V2 shock bodies ✅ Direct fit for #91576 📦 Includes: (2) 3x21mm V2 Chrome Shock Shafts ✅ Compatibility: Fits #91576 V2 Shock Bodies Vehicles using #91576 shocks (check vehicle manual for confirmation) 🏁 Keep your suspension running smooth and race-ready with Factory Team precision!

Read more less

🔋⚡ Run Your 5mm Battery With Existing 4mm Connectors! The ProTek RC 5mm to 4mm Bullet Reducers are a simple and effective solution for racers using batteries equipped with 5mm bullet ports while maintaining 4mm bullet connectors on their ESC and charging equipment. These adapters eliminate the need to change connectors, allowing you to continue using your existing electronics and charge leads with newer battery packs. A must-have accessory for racers with mixed battery and connector setups. 🏁 About the Bullet Reducers 🔌 Simple Plug-and-Play Solution Simply insert the reducer into a battery's 5mm bullet socket to instantly create a 4mm bullet connection. ⚡ Maintain Existing Electronics Perfect for racers who: Use 5mm battery connectors Have ESCs with 4mm bullets Use charge leads with 4mm bullets No soldering or rewiring required. 🏎️ Race-Day Convenience Keep a set in your pit box to ensure compatibility between different battery and electronics setups. 🔧 Features ✔ Converts 5mm battery bullet ports to 4mm bullet ports✔ Allows use of existing 4mm ESC connectors✔ Compatible with 4mm charge leads✔ Quick and easy installation✔ No soldering required✔ Ideal for racing and hobby applications✔ Compact and lightweight design 📦 Includes (2) ProTek RC 5mm to 4mm Bullet Reducers 💡 Perfect For ✔ Competitive racers✔ Mixed battery connector setups✔ ESC compatibility upgrades✔ Battery charging applications✔ Pit box spare parts ⚠️ Notes Designed for use with batteries featuring 5mm bullet sockets Allows compatibility with standard 4mm bullet connectors

Read more less

Built for serious stock-class racers, the ProTek RC 2S 150C Stock Spec 4800mAh Shorty LiPo delivers explosive punch, ultra-low internal resistance, and consistent voltage from tone to tone. Featuring advanced Si-G cell technology and a low-profile LCG shorty design, this pack keeps your car balanced, planted, and fast all the way to the last lap. If you're chasing consistency and clean power delivery in 2WD or 4WD stock racing — this is the pack. ⚡ Stock-Class Performance You Can Trust With 150C discharge capability and extremely low internal resistance, this battery provides: Strong acceleration Stable voltage under load Lower operating temperatures Improved efficiency Extended cycle life The shorty LCG form factor helps optimize chassis balance and weight placement for modern race platforms. 🏁 Designed for Stock Racing This pack is engineered specifically for stock-class competition where smooth, consistent voltage is critical. The improved efficiency and reduced heat build-up keep performance predictable and reliable throughout your main. Features 4800mAh capacity 150C high-discharge rating Low IR Si-G cell technology LCG shorty hardcase design Lighter and thinner profile Strong runtime with aggressive punch 10C maximum charge rate (1C recommended for longest life) ROAR approved Includes (1) ProTek RC 2S 4800mAh Battery (2) 5mm Bullet Connectors Specifications Nominal Voltage: 7.4V (2S) Capacity: 4800mAh Max Charge Rate: 10C (40A) Peak Discharge: 150C Cell Configuration: 2S1P Watt Hours: 35.5Wh ROAR Approved: Yes Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions: 95.3 x 46.9 x 21.2mm Weight: 190g ⚠️ Important LiPo Safety Always balance charge Use a LiPo-specific charger Never leave charging batteries unattended Do not over-discharge (minimum 3.2V per cell) Use a LiPo safe charging bag Allow pack to cool before recharging Reliable voltage. Strong punch. Championship consistency. 🏆  

Read more less

Hinge Pin Brace Overview:This is a replacement front hinge pin brace designed for Team Associated RC10 platforms. It helps secure the hinge pins and maintain proper suspension alignment. 🔧 Key Features ✔ Replacement front hinge pin brace✔ Helps maintain suspension alignment✔ Supports chassis rigidity✔ Direct fit design 📦 Includes (1) Front Hinge Pin Brace 🚗 Compatibility Team Associated RC10 B7.1 Team Associated RC10 B7.1D Team Associated RC10 SC7 Team Associated RC10 T7 Ideal for replacing worn or damaged components, this brace helps keep your suspension secure and performing consistently.  

Read more less

Protect the rear of your truck with the Team Associated RC10SC7 Rear Bumper Set, designed as a direct replacement for the RC10SC7 platform. This durable bumper helps absorb impacts and protects the chassis and body during aggressive racing and bashing. Built for proper fit and easy installation, this rear bumper restores protection and keeps your truck race-ready. 🔧 Features:• Direct replacement for RC10SC7• Helps protect chassis and body from rear impacts• Durable composite construction• Easy installation with factory fit• Ideal replacement for worn or damaged bumpers 📦 Includes:• (1) Rear Bumper Set ⚙️ Specifications:• Position: Rear• Vehicle Type: Short Course Truck ✅ Compatibility:• Team Associated RC10SC7      

Read more less

Upgrade your pit setup with the 1UP Racing Pro Pit Tray Set with Shock Stands Combo—a sleek, all-in-one workspace solution built for racers who demand organization, efficiency, and professional presentation. This complete pit system features precision-machined aluminum construction with a dual satin and gloss black finish for a high-end look. The tray is designed with the perfect depth, smooth filleted corners, and dedicated cutouts for differential outdrives, keeping parts secure and easy to access. Hidden magnets hold body clips in place and securely attach the included on-road and off-road shock stands. Both shock stands feature forged carbon trays and magnetically collapse into the included protective storage box with foam inserts, making transport clean and safe. Features Precision-machined aluminum pit tray Dual satin & gloss black finish Ideal tray depth with smooth filleted corners Hidden magnets for body clip storage Differential outdrive cutouts Includes on-road and off-road shock stands Shock stands magnetically attach to tray Forged carbon shock stand trays Protective storage box with foam insert included Includes (1) Pro Pit Tray (1) Off-Road Shock Stand (1) On-Road Shock Stand (1) Storage Box with Foam Insert A premium pit solution designed to keep your workspace organized, efficient, and race-ready—every time you wrench. 🏁  

Read more less

Rolling freely is critical for race-day performance, and the JConcepts Radial NMB Bearing Set is built to meet the demands of elite competition. This complete kit uses NMB stainless steel bearings manufactured to exacting tolerances, delivering smooth rotation, durability, and long service life under hard racing conditions. Designed as a direct-fit replacement, this set restores efficiency, reduces drivetrain drag, and helps keep lap times consistent from the first heat to the mains. Features & Benefits: High-quality NMB stainless steel bearings Precision tolerances for smooth, efficient rotation Durable construction for long-lasting performance Reduces friction and improves drivetrain efficiency Designed for the rigors of competitive racing Compatibility (Direct Fit): Team Associated B6.4 Team Associated B6.4D Team Associated T6.4 Team Associated SC6.4 Includes: Complete radial bearing set for supported models A must-have upgrade or refresh for racers looking to keep their Associated platform rolling smooth and fast.

Read more less