Traxxas 34-Tooth Pinion Gear (1.0 Mod, 5mm Bore) – Part #6493⚙️ Max Out Top Speed. Built for Brutal Brushless Power. The Traxxas 34T Pinion Gear is precision machined for smooth performance and maximum efficiency. With a 1.0 metric pitch and 5mm bore, it’s made to fit high-powered brushless setups and withstand serious speed and torque. Perfect for high-speed runs and gear ratio tuning. ✅ 34-tooth gear for higher top-end speed✅ 1.0 Mod pitch for strength and durability✅ Fits 5mm motor shafts (ideal for brushless systems)✅ Machined steel for long-lasting wear resistance✅ Includes set screw 📦 Includes: (1) 34T Pinion Gear (1.0 Mod, 5mm bore) (1) Set Screw

Read more less

Traxxas 36mm Camber Link Turnbuckles (2) – Part 2443Fine-Tune Your Ride Height & Camber. This replacement camber link turnbuckle set includes two 36mm steel turnbuckles, designed specifically for the Traxxas Bandit. Easily adjust your rear camber angle to improve handling, cornering grip, and tire wear. ✅ Direct fit for Traxxas Bandit✅ Includes two 36mm steel turnbuckles✅ Precision threads for smooth adjustment✅ Strong steel construction – durable and race-tested✅ Adjustable with a turnbuckle wrench (sold separately) 📦 Includes: (2) 36mm Camber Link Turnbuckles Part #: 2443 💡 Pro Tip: Pair with upgraded rod ends or toe links for full tuning flexibility and improved suspension geometry.

Read more less

Traxxas 39mm Front Aluminum Camber Link – Part 3737 (Red or Blue)Tuned Precision. Aluminum Strength. Color to Match Your Build. The Traxxas 39mm front camber link turnbuckle is built from lightweight, anodized aluminum to provide extra strength and adjustability over stock plastic links. Whether you're upgrading for durability or adding style, this part delivers both. ✅ Available in Red or Blue anodized finish – match your rig’s style✅ Assembled with rod ends & hollow balls – ready to install✅ 39mm length – direct fit for Traxxas front suspension✅ Aluminum construction – stiffer, more durable than stock✅ Perfect for tuning front camber on high-performance setups✅ See Part 3741X for complete front/rear camber link set 📦 Includes: (1) 39mm Aluminum Camber Link Turnbuckle (Assembled) (2) Hollow Balls Part #: 3737 OR 3737A (choose Red or Blue) 💡 Pro Tip: Pair with aluminum rear camber links and toe links for a fully upgraded suspension geometry setup.  

Read more less

Keep your engine secure with this pack of four 3x10mm flat head hex screws from Traxxas. Designed specifically for engine mount applications, these screws offer a flush fit and solid hold. A must-have for maintenance or replacement in your Traxxas nitro models. ✅ Flat head for flush engine mount fit✅ 3x10mm hardened steel construction✅ Hex drive for easy installation✅ Genuine Traxxas part Includes: (4) 3x10mm Flat Head Engine Mount Hex Screws Part #: 4859 Perfect fit. Proven durability. Traxxas quality.    

Read more less

Traxxas 3x10mm Countersunk Machine Screws (6) – Part 3177Flush Fit. Clean Finish. Reliable Hold. The Traxxas 3x10mm countersunk machine screws are ideal when you need a flat, snag-free finish on your chassis or components. Perfect for securely mounting parts where a flush surface is critical. ✅ Includes 6 countersunk machine screws✅ Size: 3x10mm✅ Precision-threaded for secure fitment✅ Countersunk head – sits flush for clean installs✅ Great for chassis plates, skid plates, and more 📦 Includes: (6) 3x10mm Countersunk Machine Screws Part #: 3177 💡 Pro Tip: Use with countersunk washers or directly into flat surfaces where clearance matters.

Read more less

Traxxas 3x10mm Washer-Head Machine Screws (6) – Part 3193Secure Fit. Wider Hold. Versatile Length. The Traxxas 3x10mm washer-head machine screws are a go-to solution when you need a reliable fastener with added grip. The integrated washer-style head distributes pressure evenly — ideal for fastening into plastic or securing sensitive components. ✅ Includes 6 washer-head machine screws✅ Size: 3x10mm – versatile length for multiple RC applications✅ Integrated washer head – prevents pull-through and distributes load✅ Standard 3mm thread – fits most 1/10 scale Traxxas vehicles✅ Perfect for mounting electronics, suspension parts, and body panels 📦 Includes: (6) 3x10mm Washer-Head Machine Screws Part #: 3193 💡 Pro Tip: Ideal for use in plastic components where added surface area helps prevent damage.  

Read more less

Whether you're replacing worn-out hardware or stocking up your pit box, these genuine Traxxas 3x12mm button head machine screws are a must-have! Made with precision and durability in mind, they're perfect for securing various components on your Traxxas RC vehicles. ✅ Includes: 6 screws✅ Thread: Machine✅ Size: 3x12mm✅ Fits: Virtually any Traxxas vehicle – including Revo, Slash, Rustler, TRX-4, and more✅ Use for: Repairs, upgrades, or custom builds Built by Traxxas for Traxxas – engineered to fit right every time.    

Read more less

These 3x12mm countersunk machine screws from Traxxas are perfect for flush-mount applications where a clean, low-profile finish is needed. With Phillips drive heads for easy installation, they’re ideal for chassis and other flat-surface mounting tasks. Features:• 3x12mm steel machine screws• Countersunk heads for flush fit• Phillips drive for standard screwdriver compatibility• Great for chassis and hardware installations• Genuine Traxxas hardware for reliable performance Includes:• (6) 3x12mm Countersunk Machine Screws (Phillips Drive)Part Number: 3178 Tighten up your build with dependable, flush-fitting Traxxas screws.  

Read more less

  Keep your rig tight and secure with this set of 3x15mm button head machine screws from Traxxas. Built for durability and precision, these screws are perfect for maintenance, repairs, or custom builds. 🔩 Features: (6) High-quality 3x15mm button head machine screws Strong steel construction for long-lasting use Ideal for a wide range of Traxxas models, including the Revo Great for general RC repairs and upgrades Fits:Any vehicle that requires 3x15mm machine screws – universal compatibility across many Traxxas platforms. Reliable, tough, and ready to bolt down your next project.

Read more less

Traxxas 3x15mm Countersunk Machine Screws (6) – Part 3179Longer Reach. Flush Fit. Factory Reliable. The Traxxas 3x15mm countersunk machine screws are designed for secure fastening where a flush surface is needed — with a little more length for deeper mounting applications. ✅ Includes 6 precision-machined screws✅ Size: 3x15mm – great for thicker components or multiple layers✅ Countersunk head – installs flush for a smooth, clean finish✅ Standard 3mm thread – fits most Traxxas 1/10 scale builds✅ Perfect for chassis, skid plates, and hardware upgrades 📦 Includes: (6) 3x15mm Countersunk Machine Screws Part #: 3179 💡 Pro Tip: Ideal for use in areas where ground clearance matters or where screws pass through multiple materials.

Read more less

Traxxas 3x18mm Round-Head Machine Screws (6) – Part 2565Reliable Hardware. Precision Fit. The Traxxas 3x18mm round-head machine screws are perfect for replacing lost hardware or stocking your pit box. Built for a secure fit and clean finish, these screws are ideal for a wide range of RC assembly applications. ✅ Includes 6 round-head machine screws✅ Size: 3x18mm✅ Standard thread – compatible with most 1/10 Traxxas builds✅ Ideal for suspension, body, and chassis components✅ OEM quality for reliable performance 📦 Includes: (6) 3x18mm Round-Head Machine Screws Part #: 2565 💡 Pro Tip: Always keep a few spare hardware packs on hand for quick repairs and build adjustments.  

Read more less

Secure your components with confidence using Traxxas 3x20mm Countersunk Machine Screws. Featuring hex drive heads and a flush-fit countersunk design, these screws are perfect for applications where a smooth surface is essential. Features:• 3x20mm steel machine screws• Countersunk heads for flush mounting• Hex drive for reliable installation• Ideal for chassis, suspension, and flat-surface mounting• Genuine Traxxas hardware Includes:• (6) 3x20mm Countersunk Machine ScrewsPart Number: 2590 Perfect fit, strong hold—upgrade or replace with genuine Traxxas quality.      

Read more less

Traxxas 3x25mm Round-Head Machine Screws (6) – Part 2569Long Reach. Rock-Solid Hold. The Traxxas 3x25mm round-head machine screws are ideal for applications that require extra length without sacrificing strength or fit. Perfect for securing larger components or layering through thicker mounts. ✅ Includes 6 round-head machine screws✅ Size: 3x25mm – longer length for deeper mounting points✅ Durable steel construction – built to last under stress✅ Compatible with standard 3mm thread applications✅ Fits many Traxxas 1/10 scale models 📦 Includes: (6) 3x25mm Round-Head Machine Screws Part #: 2569 💡 Pro Tip: Match with washers or spacers to create rock-solid mounting solutions for electronics, bumpers, and more.    

Read more less

🔩 Strong, reliable fasteners for your Traxxas builds. This pack of Traxxas 3x30mm Button Head Machine Screws is perfect for repairs, upgrades, or custom builds. Made from durable steel and precision-threaded, they’re compatible with a wide range of Traxxas models, including the Revo. ✅ Durable steel construction✅ Precision M3 threading✅ Button head design for a smooth finish✅ Fits many Traxxas vehicles, including the Revo 📦 Includes:• (6) 3x30mm Button Head Machine Screws    

Read more less

Traxxas 3x8mm Button Head Machine Screws (6) – Part #2576🔩 Essential Hardware. Universal Fit. Keep your rig dialed with this 6-pack of Traxxas 3x8mm Button Head Screws. Designed for a clean, low-profile finish and built to handle tough conditions, these machine screws are perfect for a wide range of RC applications—including the Traxxas Revo and beyond. ✅ Button head design for a sleek and secure hold✅ Machine thread for metal or tapped plastic✅ Universal fit across many Traxxas vehicles✅ A great go-to screw for any pit box 📦 Includes: (6) 3x8mm Button Head Machine Screws 

Read more less

Traxxas 3x8mm Flat Head Screw (6) (VXL) – Part #3931🔩 Secure Fit. Clean Finish. The Traxxas 3x8mm Flat Head Screws are precision-machined for a flush, low-profile installation. Ideal for use in VXL and other Traxxas vehicles, these flat head screws ensure a snug, countersunk fit for components where a smooth finish is essential. ✅ Perfect for flush-mount applications✅ 3x8mm metric sizing✅ Flat head design for clean installation✅ Genuine Traxxas quality✅ Great for chassis, body panels, and more 📦 Includes: (6) 3x8mm Flat Head Screws 💡 Pro Tip: Always check your manual for proper screw placement and thread-lock recommendations for metal-on-metal applications.  

Read more less

Traxxas 3x8mm Washer-Head Machine Screws (6) – Part 3185Built-In Grip. Extra Hold. Compact Size. The Traxxas 3x8mm washer-head machine screws provide a wider contact surface for more secure fastening — without needing a separate washer. Ideal for mounting components where extra grip is needed in a tight space. ✅ Includes 6 washer-head machine screws✅ Size: 3x8mm – compact length for low-clearance installs✅ Washer-style head – spreads load, prevents pull-through✅ Standard 3mm thread – compatible with most Traxxas builds✅ Perfect for mounting electronics, linkages, and body parts 📦 Includes: (6) 3x8mm Washer-Head Machine Screws Part #: 3185 💡 Pro Tip: Great for plastic parts where larger heads reduce the risk of cracking or stripping.  

Read more less

Traxxas 400 High Torque Waterproof Brushless Servo – Red (High Voltage)Part #: 2255 Unleash Extreme Steering Power.The Traxxas 2255 High-Torque Brushless Servo delivers serious steering authority for high-demand 1/10 scale RC vehicles. With a whopping 400 oz-in of torque, lightning-fast response, and a waterproof design, this servo is built to take your vehicle’s performance to the next level—whether bashing, racing, or crawling. It features a full metal gear train, dual ball bearings, a high-efficiency brushless motor, and an anodized aluminum center case that sheds heat and adds strength. Whether you're piloting a Slash, Stampede, UDR, or upgrading your dual-servo E-Revo, the 2255 drops in for an immediate power boost. Built for the Toughest Terrain:Waterproof—not just water-resistant—this servo is ready for mud, snow, rain, or stream crossings without skipping a beat. TRX-4 Ready:For TRX-4 models, install with the Traxxas High-Voltage BEC Kit (#2262) and use the steel servo horn (#8247X) for optimal performance and protection. Highlights: 400 oz-in torque at 6.0V 0.15 sec/60° transit speed Waterproof sealed case Full metal gears and dual ball bearings Powerful brushless motor Aluminum center case dissipates heat Compatible with TSM™ and most 1/10 scale Traxxas vehicles Ideal single-servo upgrade for E-Revo Direct replacement for models using standard 2075 servos Specifications: Motor: Brushless Voltage Range: 6.0 – 7.4V DC Torque (6.0V): 400 oz-in Speed (6.0V): 0.15 sec/60° Weight: 64g Spline: 25T Gears: Metal Case: Plastic top/bottom, anodized aluminum center Controller: Digital Drop in the 2255 and take full control. Whether trail crawling or blasting around the track, this servo delivers the brute force and precision you need to lead the pack.

Read more less

Traxxas 47mm Front Camber Link Turnbuckles (2) – Part 2444Tighten Up Your Front-End Geometry. The Traxxas 47mm Front Camber Link Turnbuckle Set is a direct replacement for the front camber links on the Traxxas Bandit. These adjustable steel turnbuckles allow you to fine-tune your camber for better cornering, tire contact, and front-end responsiveness. ✅ Designed specifically for the Traxxas Bandit (front suspension)✅ Includes two 47mm steel turnbuckles✅ Smooth-threaded for precise alignment changes✅ Heavy-duty steel construction – reliable and durable✅ Adjustable with a turnbuckle wrench (sold separately) 📦 Includes: (2) 47mm Front Camber Link Turnbuckles Part #: 2444 💡 Pro Tip: Combine with the 36mm rear turnbuckles (Part 2443) for full camber control front and rear.

Read more less

Traxxas 48P Pinion Gear (28T) – Part #4728⚙️ Precision Gearing. Balanced Performance. Dial in your drivetrain with the Traxxas 28-tooth 48-pitch pinion gear. Perfect for fine-tuning your RC’s performance, this hardened steel gear delivers smooth acceleration and balanced top-end speed when paired with an 83T spur gear. Whether you're racing or bashing, proper gearing can mean the difference between finishing strong or falling short. ✅ 48-pitch, 28-tooth steel pinion✅ Ideal for increasing speed while maintaining efficiency✅ Compatible with standard 3mm motor shafts✅ Perfect match with 83T spur gear for optimized gearing✅ Set screw included for secure installation 📦 Includes: (1) 28T 48P Pinion Gear (1) Set Screw 💡 Pro Tip: Want more torque and acceleration? Go with a smaller pinion. Want more top speed? Gear up with a larger pinion—just like this one!  

Read more less

Traxxas 48P Spur Gear (76T)Part #: 4676 This 76-tooth, 48-pitch spur gear is a direct replacement from Traxxas, ideal for dialing in your gearing for optimal performance. Whether you're fine-tuning for acceleration or speed, this gear provides smooth, reliable power transfer. Features: Genuine Traxxas replacement part 48-pitch, 76-tooth gear Perfect for customizing gear ratios Durable molded construction Includes: (1) 76T 48P Spur Gear Note: Ensure pitch compatibility with your pinion gear before installation.  

Read more less

Traxxas 48P Spur Gear (86T)Part #: 4686 Fine-tune your gearing with this optional 48-pitch, 86-tooth spur gear from Traxxas. Whether you're looking to optimize for more torque or higher top-end speed, this precision-molded gear delivers consistent performance and smooth power delivery. Features: Optional 48-pitch 86-tooth spur gear Ideal for adjusting gear ratios for better torque or speed Durable molded construction Genuine Traxxas quality and reliability Includes: (1) 86T 48P Spur Gear Note: Be sure to verify pitch compatibility with your pinion gear before installing.

Read more less

Traxxas 4mm Aluminum Flanged Serrated Locknuts (4-Pack) Part #: 1747G / 1747R / 1747T / 1747A / 1747PAvailable Colors: Green, Red, Blue, Black, Purple Add both function and flair to your RC build with Traxxas Aluminum 4mm Flanged Locknuts! These serrated, anodized locknuts offer a lightweight, high-strength upgrade that resists loosening from vibration—perfect for racers and bashers alike. 📦 Includes: (4) 4mm Aluminum Flanged Serrated Locknuts (choose color) ✅ Features: CNC-machined from lightweight 6061-T6 aluminum Anodized finish for brilliant color and corrosion resistance Serrated flange helps grip plastic or metal surfaces securely Adds a high-performance, custom look to your RC rig Fits standard 4mm threaded axles and components Compatible with most Traxxas 1/10 scale vehicles 🎨 Dress up your build and lock in performance—available in multiple colors to match your style!

Read more less

Traxxas 4mm Locknuts (10-Pack) Part #: 1747 | Secure Fit for Your RC Wheels & Components The Traxxas 1747 4mm Locknuts are designed to keep your wheels and components securely in place under extreme RC conditions. Built for strength and vibration resistance, these locknuts are a must-have for racers and bashers alike. 📦 Includes: (10) 4mm Locknuts ✅ Features: Nylon-insert locknut design resists loosening from vibration Standard 4mm thread size for broad compatibility Ideal for wheel nuts, suspension arms, and more Fits a wide range of Traxxas vehicles Durable metal construction

Read more less

Traxxas 4mm Steel Flanged Serrated Nylon Locknuts (8) – Part #3647🔒 Secure It Right the First Time. The Traxxas 4mm Flanged Serrated Nylon Locknuts are built to keep your critical components locked down, even under extreme RC action. These steel locknuts feature a flanged base and serrated surface for extra grip, while the nylon insert ensures they won’t back off from vibration. ✅ Perfect for wheels, suspension, and drivetrain parts✅ Serrated flange resists loosening under stress✅ Durable steel construction with nylon insert✅ Direct replacement for most Traxxas vehicles 📦 Includes: (8) 4mm Flanged Serrated Nylon Locknuts 💡 Pro Tip: Always keep extras on hand—these are one of the most-used fasteners in your toolbox.

Read more less

Traxxas 4x15mm Countersunk Screws (6)Part #: 3167 Don’t let the small stuff slow you down! These Traxxas 4x15mm Countersunk Screws are a must-have for your toolbox. Designed to sit flush and secure, they’re perfect for keeping your rig dialed in and clean. Whether you're replacing worn hardware or building something new, this 6-pack has your back. Includes: (6) 4x15mm Countersunk Screws Built for durability. Backed by Traxxas. Ready for action.  

Read more less

Traxxas 54T Spur Gear – 0.8 Mod / 32-Pitch – Part 3956RSmooth Power Transfer. Built for Brushless. The Traxxas 54-Tooth Spur Gear (3956R) is a direct replacement part for high-performance 1/10 scale models using a 0.8 Mod / 32-pitch gear setup. Ideal for brushless power systems, this gear delivers strong, consistent power transfer while holding up to heavy torque. ✅ Tooth Count: 54T – perfect for torque-balanced gearing setups✅ Pitch: 32P / 0.8 Mod – tough and compatible with brushless motors✅ Durable molded construction – long-lasting under load✅ OEM direct fit for Traxxas models using 32P spur gears✅ Compatible with slipper clutch systems 📦 Includes: (1) 54-Tooth Spur Gear (32P / 0.8 Mod) Part #: 3956R 💡 Pro Tip: Pair with the correct pinion gear to dial in your ideal torque vs. speed ratio for your terrain and driving style.  

Read more less

Traxxas 54T Spur Gear – 0.8 Mod Metric Pitch – Part 3956Factory Fit. Smooth Mesh. Built to Perform. The Traxxas 54-Tooth Spur Gear (3956) is a direct replacement part designed to mount on the transmission input shaft, meshing with your pinion gear to deliver reliable, consistent power transfer in demanding driving conditions. ✅ 54-tooth gear – standard gearing for balanced speed and torque✅ 0.8 Metric Pitch – matches with Mod 0.8 / 32-pitch pinion gears✅ Durable molded construction – designed for long-lasting performance✅ Fits Traxxas vehicles using 0.8MP spur setups✅ Mounts to input shaft, meshes with clutch bell pinion 📦 Includes: (1) 54T Spur Gear (0.8 Metric Pitch) Part #: 3956 💡 Pro Tip: Use threadlock when re-installing your spur gear screws to prevent backing out under vibration.

Read more less

  Overview:Add strength and style to your build with the Traxxas 5mm Aluminum Flanged Nylon Locking Nuts. Machined from lightweight aluminum and equipped with nylon inserts, these locknuts stay tight under vibration and high loads while reducing rotating mass. Available in four bold anodized colors, they’re a perfect mix of performance and looks. Features: Set of 4 flanged M5 locknuts Machined from durable, lightweight aluminum Nylon insert for secure, vibration-resistant fit Flanged design distributes load for better holding power Available in Blue, Red, Green, or Black anodized finishes Genuine Traxxas factory hardware Compatibility: Fits Traxxas models using 5mm wheel nuts, including: X-Maxx Maxx E-Revo VXL Brushless E-Revo 2.0 XO-1 Other Traxxas vehicles requiring 5mm locknuts (check manual) Includes: (4) 5mm Aluminum Flanged Nylon Locking Nuts – selected color Part Number: 8447

Read more less

Traxxas 5x11x4mm Ball Bearings (2) – Part 5116Smooth Operation. Built to Last. The Traxxas 5x11x4mm Ball Bearings are a direct replacement for worn-out or damaged bearings in a variety of Traxxas vehicles. Designed for low-friction rotation and long-lasting performance, these bearings are perfect for keeping your drivetrain, hubs, or transmission running like new. ✅ Includes 2 ball bearings✅ Size: 5x11x4mm – fits many Traxxas applications✅ Precision construction – reduces rolling resistance and wear✅ Great for wheels, transmissions, and steering systems✅ OEM replacement quality – trusted fit and durability 📦 Includes: (2) 5x11x4mm Ball Bearings Part #: 5116 💡 Pro Tip: Replace bearings in pairs for balanced performance and reduced vibration.

Read more less

Traxxas 5x8x0.5mm Teflon Washers (20) Part #: 1985 Ensure smoother performance and reduced friction with Traxxas PTFE-Coated Teflon Washers. These 5x8x0.5mm washers are designed to be used with ball bearings, helping to extend bearing life and improve overall drivetrain efficiency. ✅ Features: PTFE (Teflon) coating for low friction and long wear Ideal for use with 5x8mm ball bearings Helps reduce heat and drag in rotating components Precision-manufactured for consistent fit and function 📦 Includes: (20) 5x8x0.5mm PTFE-Coated Teflon Washers 🛠️ Perfect for racers and bashers alike — upgrade your RC performance with these ultra-low friction washers from Traxxas!

Read more less

Keep your Traxxas vehicle running smooth with this pack of 6x12x4mm ball bearings. Designed as a direct replacement, these bearings reduce friction, improve efficiency, and help extend the life of your drivetrain. ✅ Direct Replacement – OEM Traxxas quality and fit✅ Smooth Performance – Reduces friction for improved speed and efficiency✅ Durable Design – Built to handle the demands of RC bashing and racing Includes: (2) Traxxas 6x12x4mm Ball Bearings Part Number: 5117 Simple, effective, and essential — the Traxxas 5117 Ball Bearings are a must-have for keeping your RC vehicle running at peak performance.

Read more less

The Traxxas 5117A Ball Bearings are a direct replacement set designed to keep your vehicle running smooth and efficient. These high-quality bearings reduce friction, improve drivetrain performance, and extend component life. ✅ OEM Replacement – Perfect fit and finish for Traxxas vehicles✅ Improves Efficiency – Reduces rolling resistance for smoother operation✅ Durable & Reliable – Built to withstand the demands of RC use Includes: (2) Traxxas 6x12x4mm Ball Bearings Part Number: 5117A Keep your Traxxas vehicle race-ready with the 5117A Ball Bearings — simple, effective, and essential.

Read more less

Keep your RC running smooth and efficient with this pair of Traxxas 6x13x5mm Ball Bearings. Designed as direct replacements, these high-quality bearings reduce friction and improve performance wherever they’re used. 🛠️ Features: Genuine Traxxas replacement part Precision 6x13x5mm ball bearings Helps maintain smooth and reliable drivetrain operation Perfect for maintenance or upgrades Includes:(2) 6x13x5mm Ball Bearings A simple upgrade that makes a big difference in durability and speed—don’t hit the track without them!

Read more less

  Traxxas 83T Spur Gear – 48 Pitch – Part 4683Dial In the Perfect Gear Ratio. Built for Smooth Torque Control. The Traxxas 83-Tooth Spur Gear (Part 4683) is a high-precision replacement gear designed for models equipped with a Torque-Control slipper clutch. With fine 48-pitch teeth, it's perfect for smooth throttle response and gear ratio tuning in 1/10 scale vehicles. ✅ Tooth Count: 83T – ideal for high-acceleration gearing setups✅ Pitch: 48P – fine-tooth mesh for smooth and quiet operation✅ Designed for Torque-Control slipper clutch systems✅ Durable molded construction – reliable under brushless power✅ Fits a wide range of Traxxas 1/10 scale models 📦 Includes: (1) 83-Tooth 48P Spur Gear Part #: 4683 💡 Pro Tip: Pair with different 48P pinion sizes to fine-tune your speed vs. torque for your track or terrain.  

Read more less

Traxxas 90T Spur Gear – 48 Pitch – Part 4690Optional Gearing. Maximum Torque. Smooth Power Delivery. The Traxxas 90-Tooth Spur Gear (Part 4690) is a high-tooth-count option for drivers looking to increase low-end torque and improve throttle control. Designed for 1/10 scale Traxxas vehicles using 48-pitch gears, this spur is perfect for tight tracks, crawling setups, or slower-speed applications where control matters most. ✅ Tooth Count: 90T – increases torque and low-end response✅ Pitch: 48P – fine-pitch for smooth and quiet operation✅ Optional upgrade for fine-tuning gear ratio✅ Durable molded construction – built to handle real-world use✅ Fits a wide range of Traxxas 1/10 scale models 📦 Includes: (1) 90-Tooth 48P Spur Gear Part #: 4690  

Read more less