Keep ESC and motor temperatures under control with the 30x30x10mm Aluminum High-Speed HV Cooling Fan from ProTek RC. Designed for high-performance RC applications, this compact fan delivers strong airflow while handling true 2S high-voltage power with confidence. The machined aluminum housing helps dissipate heat more efficiently than plastic fans and adds extra protection to the fan blades in the event of a crash. Dual ball bearings ensure smooth, reliable operation at high RPMs, making this fan a durable choice for racing and bashing alike. Pre-wired with a 2-pin JST connector and including a long adapter lead, installation is simple whether you’re powering it from a receiver or another voltage source. ⚠️ Installation Note:Install the fan at least 5mm away from the motor to allow proper airflow and prevent magnetic interference. Features: 30x30x10mm aluminum high-speed cooling fan Ideal for ESC and motor cooling applications Machined aluminum case improves heat dissipation Dual ball bearings for durability and longevity True 2S HV rated (up to 8.75V) Anodized black finish with silver chamfered edges Compact size fits 1/12, 1/10, and 1/8 scale platforms Includes: (1) 30mm Aluminum HV Cooling Fan Pre-installed 2-pin JST connector (1) 200mm adapter lead for easy power connection

Read more less

Perfect for High-Power Drag Racing Builds📦 Part #: Choose 20T–40T Take your drag racing setup to the next level with the ProTek RC 48P Lightweight Hard Anodized Aluminum Pinion Gear. These pinions are specifically engineered for high-RPM 4-pole motors with 5.0mm shafts, making them ideal for no-prep and straight-line drag applications. Precision-cut for smooth 48 pitch mesh, they're built to deliver maximum efficiency and faster acceleration by reducing rotational mass. 🔧 Key Features: Pitch: 48P (Perfect for drag and speed builds) Bore Size: 5.0mm – fits large shaft 4-pole motors Material: Lightweight aluminum for reduced rotating mass Finish: Hard anodized for durability under high stress Etched Tooth Count: Easy size identification Performance: Quick spool-up, consistent gear mesh, and reliable grip under load 🏁 Why It Matters: Less mass = faster response. Whether you're trying to shave tenths off your ET or just want smoother power delivery, these ProTek pinions give your build the edge where it counts. 👉 Choose from 20T to 40T to dial in your exact gearing needs! Note: Compatible with 48 pitch spur gears and motors that use 5mm output shafts. Always double-check mesh and gear clearance during install.

Read more less

🏁⚡ Reliable High-Current Electrical Connections The ProTek RC 4mm Serrated Male Bullet Connectors are high-quality connectors designed to provide secure, low-resistance electrical connections for a variety of RC applications. Ideal for batteries, motors, and electronic speed controllers, these serrated bullet connectors ensure excellent contact and dependable power transfer. Whether you're building custom battery packs or replacing worn connectors, these ProTek bullets offer the performance and reliability serious RC enthusiasts demand. 🏁 About the 4mm Serrated Bullet Connectors ⚡ Efficient Power Transfer Precision-machined 4mm bullet connectors provide a secure fit and low-resistance connection to maximize electrical efficiency. 🔒 Serrated Design The serrated surface improves contact pressure for a reliable connection that resists vibration and helps maintain consistent power delivery. 🔧 Versatile Applications Perfect for a wide range of RC wiring projects, including: Battery connectors Motor-to-ESC connections Custom wiring setups High-current electrical applications 🔧 Features ✔ High-quality 4mm male bullet connectors✔ Serrated design for improved electrical contact✔ Low-resistance power transfer✔ Ideal for high-current RC applications✔ Great for battery and motor wiring✔ Includes heat shrink tubing for a clean installation 📦 Includes (3) 4mm Serrated Male Bullet Connectors Heat Shrink Tubing 📊 Specifications Specification Details Connector Size 4mm Connector Type Male Design Serrated ⚠️ Notes Suitable for a variety of RC electrical applications. Professional soldering is recommended for the best connection and performance. Package contents include three (3) male bullet connectors, despite some product titles listing two.

Read more less

🔋⚡ Run Your 5mm Battery With Existing 4mm Connectors! The ProTek RC 5mm to 4mm Bullet Reducers are a simple and effective solution for racers using batteries equipped with 5mm bullet ports while maintaining 4mm bullet connectors on their ESC and charging equipment. These adapters eliminate the need to change connectors, allowing you to continue using your existing electronics and charge leads with newer battery packs. A must-have accessory for racers with mixed battery and connector setups. 🏁 About the Bullet Reducers 🔌 Simple Plug-and-Play Solution Simply insert the reducer into a battery's 5mm bullet socket to instantly create a 4mm bullet connection. ⚡ Maintain Existing Electronics Perfect for racers who: Use 5mm battery connectors Have ESCs with 4mm bullets Use charge leads with 4mm bullets No soldering or rewiring required. 🏎️ Race-Day Convenience Keep a set in your pit box to ensure compatibility between different battery and electronics setups. 🔧 Features ✔ Converts 5mm battery bullet ports to 4mm bullet ports✔ Allows use of existing 4mm ESC connectors✔ Compatible with 4mm charge leads✔ Quick and easy installation✔ No soldering required✔ Ideal for racing and hobby applications✔ Compact and lightweight design 📦 Includes (2) ProTek RC 5mm to 4mm Bullet Reducers 💡 Perfect For ✔ Competitive racers✔ Mixed battery connector setups✔ ESC compatibility upgrades✔ Battery charging applications✔ Pit box spare parts ⚠️ Notes Designed for use with batteries featuring 5mm bullet sockets Allows compatibility with standard 4mm bullet connectors

Read more less

  Keep your workspace clean and organized with the ProTek RC Aluminum 1/10 Pinion Gear Caddy — the ultimate pit accessory for racers who like their tools as dialed as their setups. Precision-machined from high-grade aluminum, this caddy securely stores up to 11 pinions, protecting them from damage while keeping them easily accessible for quick gearing changes. ✅ Holds Up to 11 Pinions – Fits standard 1/8" bore pinions✅ CNC-Machined Aluminum – Durable, professional-grade construction✅ Black Anodized Finish – Sleek look with chamfered edges and laser-etched logo✅ Steel Mounting Posts – Prevent pinions from slipping or scratching✅ Perfect for Trackside Adjustments – Keeps your gearing options ready for any setup Includes: (1) ProTek RC Aluminum 1/10 Pinion Gear Caddy ⚡ Stay organized, stay fast — the ProTek Pinion Caddy keeps your gearing game strong and your pit setup pro-level.

Read more less

🔧⚙️ Precision Suspension Tuning Starts Here The ProTek RC Aluminum Ball Stud Washer Set is a must-have upgrade for racers looking to fine-tune their suspension geometry. Made from durable black anodized aluminum, these precision-machined washers won't compress or deform like plastic spacers, providing consistent ball stud height for accurate suspension setup. With three different thicknesses included, you'll have the flexibility to make precise roll center, steering, and wheelbase adjustments. 🔧 About the Aluminum Ball Stud Washer Set ⚙️ Precision Suspension Adjustments These washers allow you to accurately adjust ball stud height, making it easier to fine-tune suspension geometry for improved handling and performance. Common uses include: Roll center adjustments Steering geometry tuning Wheelbase adjustments Link height spacing 💪 Durable Aluminum Construction Unlike plastic spacers, these black anodized aluminum washers resist flattening and deformation, helping maintain consistent suspension settings even under heavy loads. 🏁 Multiple Thicknesses Included Three washer thicknesses provide a variety of tuning options, allowing quick setup changes for different track conditions. 🔧 Features ✔ Precision-machined aluminum construction✔ Black anodized finish✔ Won't flatten or deform like plastic spacers✔ Fits both 4-40 and M3 ball studs✔ Ideal for suspension geometry adjustments✔ Three washer thicknesses included✔ Great for racers and performance tuning 📦 Includes (4) 3 x 5.5 x 0.5mm Aluminum Washers (4) 3 x 5.5 x 1.0mm Aluminum Washers (4) 3 x 5.5 x 2.0mm Aluminum Washers Total: 12 Washers 📊 Specifications Specification Details Material Aluminum Finish Black Anodized Inside Diameter 3mm Outside Diameter 5.5mm Thicknesses Included 0.5mm, 1.0mm, 2.0mm Quantity 12 Washers 🚗 Compatibility Compatible with: RC vehicles using 4-40 ball studs RC vehicles using M3 ball studs Ideal for most on-road and off-road vehicles that utilize adjustable ball stud suspension geometry. ⚠️ Notes Precision tuning washers designed for suspension geometry adjustments. Compatible with both 4-40 and M3 ball studs. Black anodized finish provides excellent durability and corrosion resistance. • • Also available in Blue Anodized (ProTek RC PTK-8371).

Read more less

  The ProTek RC Aluminum Clamping Servo Horn is a precision upgrade for Team Associated B6-series vehicles, delivering increased rigidity, accuracy, and durability over the stock plastic horn. Machined from a solid block of aluminum alloy and finished in black anodizing, this servo horn is built to handle the demands of modern high-performance racing. Designed as a direct replacement for the Team Associated ASC91728 servo horn, this updated version features a 2mm taller ball stud standoff, improving steering geometry and consistency. Weighing just 2 grams, it maintains ultra-low rotating mass while adding the security of a clamping design, helping prevent slippage even if the retaining screw loosens during a run. Ideal for competitive racers looking for precise steering response and long-term reliability, this ProTek servo horn offers the perfect balance of strength, weight, and performance. Features CNC-machined aluminum construction Clamping design for secure fitment 2mm taller ball stud standoff vs previous ProTek version Direct replacement for Team Associated ASC91728 Ultra-lightweight design (only 2g) Black anodized finish Specifications Spline: 25T (Futaba / Savox / ProTek compatible) Material: Aluminum Weight: 2 grams Compatibility Team Associated B6 Series Off-Road Vehicles B6 B6.1 / B6.2 / B6.3 / B6.4 B6D variants Notes Due to manufacturer tolerances, fitment may be tight with some servo brands. Test-fit before final installation.  

Read more less

🔩 Secure Your Hardware with ConfidenceThe ProTek RC Blue Thread Lock (Medium) is the ultimate solution for preventing hardware from loosening due to vibration or shock. Formulated for precision RC applications, this medium-strength thread locker is ideal for securing metal screws, nuts, and bolts — while still allowing easy disassembly with standard hand tools when needed. ⚙️ About the ProTek RC Blue Thread Lock Designed for both electric and nitro RC models, this medium-viscosity formula creates a strong bond that resists loosening under extreme conditions. It’s perfect for drivetrain components, suspension hardware, and any part exposed to constant vibration. In addition to its holding power, it prevents rust and corrosion, keeping your fasteners clean and reliable over time. 🌟 Features Medium strength — secures fasteners yet allows easy removal Resists shock and vibration for consistent reliability Prevents rust and corrosion on metal threads Cures without air exposure — sets in 10 minutes, full cure in 24 hours Ideal for RC vehicles, drones, and aircraft 🧴 Specifications Size: 0.34 fl oz (10ml) Strength: Blue (Medium) Cure Time: 10 minutes initial set / 24 hours full cure Removable: Yes Compatible Fasteners: Non-plastic screws, nuts, bolts 📦 Includes (1) 0.34 fl oz bottle of ProTek RC Blue Thread Lock (Medium Strength) 💪 Keep your rig tight, precise, and race-ready — ProTek RC Blue Thread Lock is your defense against loose hardware.

Read more less

🧵🔧 Clean Mounting. Strong Hold. Easy Access. The ProTek RC Body Mounting Hook & Loop Tape provides a simple, reliable solution for securing RC bodies and accessories. With a full 1-meter length, you can cut exactly what you need for a clean, custom setup. 🏁 About This Tape ✂️ Fully Customizable Supplied in a 1-meter length, this tape can be cut to fit any application—from body mounting to accessory placement. 🔒 Secure & Reliable Hold The hook and loop design keeps bodies and components firmly in place, even under demanding conditions. 🔄 Quick Removal Easily remove your body for maintenance or battery changes without dealing with clips or hardware. 🔧 Key Features ✔ 1-meter length for custom applications✔ Strong hook & loop fastening system✔ Secure hold for RC bodies and accessories✔ Allows quick and easy removal✔ Ideal for clean, clipless setups✔ Versatile for multiple RC uses 📦 Includes (1) Hook & Loop Tape (1 Meter Length) 🧰 Recommended Use Body mounting (clipless setups) Securing electronics or accessories Custom RC builds and modifications    

Read more less

Upgrade your brushless setup with the ProTek RC Braided Sensor Cable — built for durability, flexibility, and ultra-reliable data transfer between your ESC and motor. Whether you're racing or bashing, this premium sensor cable ensures clean communication and long-lasting performance. Overview The ProTek RC braided sensor cable uses flexible silicone-shielded internal wires wrapped in a tough nylon braided outer sheath for maximum protection. Heat-shrink ends secure the braid and reinforce the connection points, preventing damage or fraying. This creates a smooth-bending, shock-absorbing cable that maintains consistent sensor accuracy under extreme chassis movement. Perfect for any sensor-based brushless system that uses standard replaceable sensor harnesses. Features Durable black braided nylon outer sheath Silicone-shielded internal sensor wires Heat-shrink reinforced ends for long life Flexible, shock-absorbing design Ensures clean and consistent ESC–motor data transfer Compatible with all standard brushless systems using 6-wire sensor leads Great upgrade for racing applications Includes (1) ProTek RC Braided Brushless Motor Sensor Cable — 150mm

Read more less

  Give your brushless system the reliability and protection it deserves with the ProTek RC Braided Sensor Cable. Designed for high-performance RC setups, this premium cable ensures smooth, accurate communication between your ESC and motor — even in the most demanding conditions. Overview The ProTek RC braided sensor cable features flexible silicone-insulated internal wires protected by a rugged black nylon braided sheath. Heat-shrink reinforcement on both ends secures the braid, prevents wear, and keeps the harness stable through constant chassis flex and vibration. The result is a durable, smooth-bending sensor cable that maintains consistent signal integrity for peak motor performance. Compatible with any sensor-based brushless motor system that uses a standard replaceable 6-wire sensor harness. Features Tough nylon braided outer sheath for maximum protection Silicone-shielded internal wires Heat-shrink reinforced ends Flexible, shock-absorbing design Maintains clean and stable ESC–motor data transfer Compatible with all standard 6-wire brushless systems Ideal for racing or high-performance applications Includes (1) ProTek RC Braided Brushless Motor Sensor Cable — 200mm  

Read more less

The ProTek RC Braided Brushless Motor Sensor Cable is a premium replacement sensor wire designed for sensor-based brushless motor systems that use removable sensor harnesses. Built for reliability and durability, this cable ensures clean, consistent signal transfer between your ESC and motor—race after race. Why You’ll Want It This cable uses individual silicone-shielded sensor wires wrapped in a black braided nylon sleeve, giving it excellent flexibility while protecting against abrasion, vibration, and shock. Shrink-wrapped ends keep everything secure and tidy, making it ideal for high-performance racing environments where reliability matters most. Features Compatible with most sensor-based brushless ESC & motor systems Individual silicone-shielded sensor wires for flexibility Braided nylon outer sheath for abrasion and impact protection Shrink-wrapped ends for durability and clean routing Smooth, reliable data transfer between ESC and motor Lightweight and race-proven design Specifications Length: 90mm Part Number: PTK-2107 Type: Brushless Motor Sensor Cable Wire Protection: Braided nylon sleeve with silicone-shielded internal wires Perfect for racers looking to replace a worn sensor wire or upgrade to a more durable, track-ready option that won’t hold your electronics back.

Read more less

ProTek R/C Clear Double Sided Tape is a 40" long roll of the 1" wide clear double side tape that has become a must have for RC use. This tape is 1mil thick and is perfect for securing receivers, ESC's or transponders to your RC car. The adhesive on the tape will keep your device securely fastened where you want it, yet the material remains easy to remove and leaves no residue behind. The waterproof, heat resistant properties help it stand up to the elements, and the soft, flexible material will conform to curved or uneven surfaces, and helps to reduce vibration to the component. Protek RC offers two types of double sided tape, clear and grey. Clear is recommend for warm weather and is superior on carbon fiber surfaces. Features: Perfect for cars, trucks, boats, helicopters, drones, rock crawlers and more! Strong adhesion and durability Water proof and heat resistant Reduces vibration Soft and flexible Suitable for curved surfaces Strong tensile strength

Read more less

🔌⚡ Clean Wiring. Reliable Signal. Low-Profile Design. The ProTek RC Flat Sensor Wire is designed to provide consistent, interference-free communication between your sensored brushless motor and ESC. With a slim, flat design, it keeps your build clean while improving wire routing in tight chassis layouts. 🏁 About This Sensor Wire 📏 Clean, Low-Profile Routing The flat cable design allows easy routing under components and through tight spaces, reducing clutter and improving overall build appearance. ⚡ Reliable Signal Transfer Engineered for consistent, interference-resistant communication, ensuring smooth motor performance in sensored brushless setups. 🎯 Perfect Fit Length At 150mm, this cable is ideal for a wide range of 1/10 scale applications and clean electronics layouts. 🔧 Key Features ✔ Low-profile flat cable design✔ Reliable signal transfer for sensored systems✔ Slim construction for easy routing✔ Helps reduce wiring clutter✔ Interference-resistant performance✔ Optimized for brushless motor/ESC communication 📦 Includes (1) Flat Sensor Wire (150mm) 📊 Specifications Length: 150mm 🧰 Recommended Use Sensored brushless motor to ESC connection Clean electronics installations Organized wiring setups  

Read more less

  Need a reliable extension for your servo wiring? The ProTek RC Heavy Duty 15cm (6") Servo Extension Lead is built for strength, durability, and high current capacity. Made with thick 22AWG wire, this extension minimizes resistance while providing dependable performance for demanding RC applications. Perfect for larger scale builds, tight chassis layouts, or any setup requiring extra lead length. Features 15cm (6") servo extension Heavy-duty 22AWG wire High current carrying capacity Durable, flexible insulation JR-style male connector Universal female connector design Connector Details Male End: JR style connector Female End: Compatible with Futaba, JR, Airtronics, and HiTec connectors Note: When using JR style connectors in the female end, verify correct polarity before powering on. Built tough for reliable signal and power delivery — a simple upgrade that prevents headaches in your electronics setup. 🔧  

Read more less

For Airtronics MT-4, MT-4S, MT-R, M12, M12S, M11X, and KoProPo EX-RR, MT-S transmitters Overview:Lightweight, long-lasting, and precision-built — the ProTek RC 7.4V 2800mAh LiPo Transmitter Battery is designed to power your Airtronics or KoProPo radio systems for marathon sessions without the bulk of standard NiMH packs. About the Transmitter Battery High-Performance LiPo Power for Pro-Level RadiosSpecifically engineered for top transmitters such as the Airtronics MT-4, M12, M11X, and KoProPo EX-RR, this 2S LiPo pack delivers up to 9–10 hours of runtime with rock-solid voltage stability. Weighing only 105g, it cuts transmitter weight by nearly 40% compared to a six-cell NiMH pack — perfect for long main events or full days at the track. Reliable Construction & Easy FitBuilt with premium lithium-polymer cells, this pack includes an XH balance lead and JR/Futaba-style discharge connector for compatibility with most chargers. Use soft foam padding inside your transmitter battery compartment for a snug, secure fit that keeps the pack in place during operation. Features: Specifically designed for Airtronics and KoProPo transmitters Lightweight LiPo chemistry — only 105g Up to 10 hours of continuous use per charge Reduces fatigue during long race days JR/Futaba connector and XH balance plug for universal compatibility Durable cell construction ensures consistent voltage and long cycle life Safety Notes: Always balance charge using a LiPo-specific charger Never over-charge, over-discharge, or leave batteries unattended Charge inside a LiPo safety bag Avoid exposure to direct sunlight or high-temperature environments Specifications: Specification Details Voltage 7.4V (2S LiPo) Capacity 2800mAh Chemistry Lithium-Polymer (LiPo) Charge Rate 1C Discharge Plug JR/Futaba Balance Plug XH Dimensions 99.2 × 31 × 17.9mm Weight 105g Includes: (1) ProTek RC 7.4V 2800mAh LiPo Transmitter Battery Pack

Read more less

Overview:Deliver maximum power with ProTek RC Low Profile 5mm “Super Bullet” Connectors, engineered for clean wiring, low resistance, and uncompromising reliability in high-current RC applications. About the Super Bullet ConnectorsThe ProTek RC Low Profile “Super Bullet” connectors feature a flat, lay-down solder design that makes for a tidy and efficient wiring setup—perfect for compact builds or low-clearance installations. Constructed from solid gold-plated brass, these connectors ensure superior conductivity and minimal voltage loss compared to traditional spring-type or Deans-style plugs. Designed for brushless motors, ESCs, chargers, and high-voltage batteries, these connectors set the new standard for performance RC power delivery. Features: Low-profile solder head for flat, lay-down wire connections Solid gold-plated design for ultra-low resistance and maximum efficiency Ideal for high-current / high-voltage applications Perfect for use between ESCs, batteries, motors, or power meters Improved durability and conductivity over traditional plug styles Simple to solder and install Includes: (2) 5mm Low Profile “Super Bullet” Male Connectors Other 5mm Bullet Options: PTK-5022: Standard (4 Male) PTK-5023: Standard (4 Female) PTK-5024: Standard (2 Male / 2 Female)

Read more less

This is the ProTek R/C Pit Mat. The ProTek R/C pit mat will take your work space from suitable, to stunning. With a 24 x 48 footprint and nearly 8 square feet of coverage, this mat is the perfect size for your work space. Made from durable 4mm thick foam material, this mat is easy to clean, roll up and store away. Plus, unlike other pit mats, the ProTek R/C Pit Mat includes a closeable mesh carry bag that makes it easy to throw the mat over your shoulder and haul around. Ditch the dirty towels and silly rubber mats, and start wrenching like a boss with this high quality mat from ProTek R/C. Features: Approximately 24 x 48 in. (60 x 120 cm) Textured surface helps to prevent parts rolling onto the floor 4mm thick padded material provides clean, flat, anti-fatigue surface Closeable, mesh bag makes for easy storage and transportation. Eye-catching ProTek R/C Styling!

Read more less

Dial in your tire gluing with ProTek RC’s Precision Stainless Steel Glue Tips—crafted for accuracy, speed, and control. Designed for use with most CA glue bottles, these 0.4mm tips offer a fine, consistent flow ideal for tire beads and other small adhesive tasks. 🛠 Features: Precision 0.4mm tip perfect for tire gluing and detailed adhesive work Reusable stainless steel construction—built to last the life of your glue bottle Works with thin to medium viscosity CA glues Universal fit – compatible with most CA glue bottles Easy to clean and maintain for repeated use 📦 Includes: (10) Precision Stainless Steel Glue Tips Stop the mess and get precise—ProTek RC glue tips are the pro’s choice for clean, controlled applications every time.

Read more less

Get clean, reliable solder joints every time with the ProTek RC Premium Rosin Core Solder 60/40. Designed for RC electronics and precision work, this solder features a classic 60/40 tin-to-lead blend that delivers smooth flow, excellent conductivity, and easy handling for everything from simple repairs to full custom builds. The integrated rosin core flux promotes strong bonding and clean joints by improving wetting action and reducing oxidation. Whether you're soldering connectors, wiring, or electronics, this solder provides consistent, professional-quality results. 🔧 Features:• 60/40 tin-to-lead blend for reliable performance• Rosin core flux for clean, strong solder joints• Smooth flow for easy and precise application• Excellent electrical conductivity• Helps reduce oxidation and improve bonding• Ideal for RC wiring, connectors, and electronics 📦 Includes:• (1) ProTek RC Premium Rosin Core Solder 60/40 (12g) ⚙️ Specifications:• Weight: 12g• Type: Rosin Core Solder• Composition: 60/40 Tin/Lead Perfect for builders and racers alike, the ProTek RC 60/40 solder delivers dependable performance and clean results for all your RC electronics work.  

Read more less

Dial in your car’s balance with precision—anywhere on the chassis.The ProTek RC Self Stick Chassis Weight Strips give racers a compact, customizable way to fine-tune weight bias, improve stability, and optimize handling on any track surface. About the Chassis Weights Each strip includes twelve 5g weights (24 total), backed with strong pre-applied adhesive.Their compact 20×9.4×4.4mm size makes them perfect for tight mounting locations—lay them flat, stack them, or tuck them into hard-to-reach spots to get your setup dialed exactly how you want. Great for: Balancing left/right weight Adding traction on slick tracks Fine-tuning front/rear bias Stabilizing high-powered builds Whether you're prepping for carpet, dirt, oval, or on-road, these weights give you total control over your setup. Features Compact 20×9.4×4.4mm design fits tight spaces Strong pre-applied sticky tape Perfect for fine-tuning chassis weight bias 120g total weight per package Stackable for precise tuning Includes (24) 5g Self-Stick Chassis Weights (12 per strip)

Read more less

🔧⚡ Build Custom Wires. Clean Connections. Professional Results. The ProTek RC Servo Lead & Terminal Crimping Tool makes it easy to create custom-length signal wires for servos, ESCs, and receiver batteries. Designed for precision and reliability, this tool ensures secure crimps without damaging pins or wiring. 🏁 About This Tool 🔌 Custom Wiring Made Easy Perfect for building or modifying servo leads and signal wires, allowing you to clean up your wiring and dial in exact lengths. 🎯 Precision Crimping Designed to securely crimp connector pins on 14–28 AWG wire, delivering consistent, reliable connections every time. 🛠️ Professional Results Ensures a tight, clean crimp without damaging delicate pins or wire insulation. 🔧 Key Features ✔ Designed for servo leads and signal wires✔ Works with 14–28 AWG wire✔ Precision crimping without damaging pins✔ Ideal for ESC, receiver, and battery wiring✔ Durable construction for long-term use✔ Perfect for custom wiring setups 📦 Includes (1) Servo Lead & Terminal Crimping Tool 🧰 Recommended Use Custom servo lead lengths ESC signal wire modification Receiver battery connector wiring Clean, professional wiring setups ⚠️ Note For best results, use new connector pins and housings when modifying or building wires  

Read more less

The R1WURKS Ultra-Lightweight Titanium HD CVA Bones (X67mm) are engineered for racers chasing maximum efficiency and response in stock classes. Crafted from specially treated Ti 6Al-4V Grade 5 Titanium, these are the lightest CVA bones R1WURKS has produced, dramatically reducing rotational inertia for faster acceleration and sharper braking. Optimized for 21.5–17.5 stock racing, these bones deliver improved power transfer, better cornering agility, and a noticeable reduction in overall drivetrain mass—giving stock racers a real competitive edge. Key Benefits Faster acceleration and deceleration Improved braking response Increased power transfer efficiency Better agility and responsiveness in corners Reduced rotational inertia and overall vehicle weight Features & Specifications Ultra-lightweight: 5.96g per pair Approximately 40% lighter than standard steel bones Precision Swiss-style machining with ultra-tight tolerances Made from treated Ti 6Al-4V Grade 5 Titanium Laser-etched logos and identification markings Designed specifically for stock racing performance Includes (2) Titanium HD CVA Bones Replaces TLR232138 Fitment TLR 22X TLR 22 5.0 A no-compromise drivetrain upgrade built for stock racers who want quicker response, lighter rotating mass, and sharper on-track performance. 🏁

Read more less

The R1WURKS 22X Series Carbon Fiber Front Shock Towers are a direct replacement for both the standard and optional front shock towers on the TLR 22X. Precision CNC-machined from high-quality carbon fiber, these towers deliver race-grade strength, consistency, and a clean professional look. Available in two premium finishes—Matte Forged and Gloss 3K Plain Weave—and in Standard, -2mm, and +2mm height options, these towers allow you to fine-tune front geometry to suit track conditions and driving style. Key Features High-strength, high-quality carbon fiber construction Precision CNC-machined for accuracy and consistency Direct replacement for stock and optional front towers Multiple height options for chassis tuning Premium cosmetic finish options Finish Options Matte Forged Gloss 3K Plain Weave 📌 Note: The forged version features a forged cosmetic surface layer only. Structural material construction is the same as the 3K plain weave versions. Options & Part Numbers Standard (ST) Height Matte Forged – 900197-F Gloss 3K Plain Weave – 900197 -2mm Height Matte Forged – 900198-F Gloss 3K Plain Weave – 900198 +2mm Height Matte Forged – 900199-F Gloss 3K Plain Weave – 900199 Includes (1) Carbon Fiber Front Shock Tower(Select desired height and finish) Fitment TLR 22X A lightweight, precise tuning upgrade that delivers strength, consistency, and pro-level looks at the front of your 22X. 🏁

Read more less

Upgrade your factory steering with the R1WURKS Aluminum Steering Rack, a precision-machined replacement designed to dramatically improve durability, steering precision, and on-track feel. Replacing the stock plastic component with 7075-T6 aluminum delivers tighter response and long-term reliability—without adding weight. At just 2.80 grams, this rack offers race-ready strength in a lightweight package, finished in sleek black anodizing with R1WURKS branding. Key Features Increased durability and precision over stock plastic Sharper steering response and improved feel Ultra-lightweight design: 2.80g CNC-machined from 7075-T6 aluminum Black anodized finish with R1WURKS branding Includes (1) Aluminum Steering Rack (2) 4×6×0.2mm shims Fitment B7 B7.1 B7D T7 SC7 B6.4 B6.4D SC6.4 T6.4 Disclaimer R1 Brushless Motor Lab, LLC is an independent manufacturer of aftermarket parts compatible with various RC vehicles. We are not affiliated with, sponsored by, or endorsed by Associated Electrics, Inc. All model references are used strictly for compatibility and identification purposes. Associated Electrics® is a registered trademark of Associated Electrics, Inc. A simple, effective steering upgrade for racers who want precision you can feel—lap after lap. 🏁  

Read more less

Upgrade your buggy with the R1WURKS B7 Battery Mount Set, a lightweight, rigid replacement for the stock plastic mounts. This premium kit includes centered and 1/2 offset mounts, allowing precise battery positioning to fine-tune weight balance and handling for different track conditions. Machined from high-strength 7075-T6 aluminum and paired with carbon fiber battery latches, this system delivers race-grade durability with smooth, secure battery retention. Included low-profile and standard standoffs support a wide range of battery heights, while titanium hardware keeps weight to a minimum. Key Features CNC-machined 7075-T6 aluminum construction Matte black anodized finish with laser-etched R1WURKS branding Centered and 1/2 offset mounts for battery position tuning Carbon fiber battery latches for strength and weight savings O-ring latch friction feature for smooth operation and secure hold Supports low-profile and standard-height batteries Lightweight titanium mounting screws included Includes (4) R1WURKS M3×8 Titanium Button Head Screws (2.5mm hex) (2) M3×6 Flat Head Screws (4) M3×8 Flat Head Screws (2) Black Aluminum Countersunk Washers (2) 6×4×1 NBR Rubber O-Rings (2) Black Aluminum Low-Profile Standoffs (2) Black Aluminum Standard Standoffs (2) Carbon Fiber Battery Latches (1) 1/2 Offset Mount A (1) 1/2 Offset Mount B (2) Centered Offset Mounts Fitment B7 Series (B7 platform) Disclaimer R1 Brushless Motor Lab, LLC is an independent manufacturer and seller of aftermarket parts compatible with various RC vehicles. We are not affiliated with, sponsored by, or endorsed by Associated Electrics, Inc. All model references are used strictly for compatibility and identification purposes. Associated Electrics® is a registered trademark of Associated Electrics, Inc. All other trademarks are the property of their respective owners. A clean, adjustable battery mounting solution built for racers who want precision balance, lighter weight, and pro-level durability. 🏁  

Read more less

Gain a competitive edge with the R1WURKS Ultra-Lightweight Titanium HD CVA Bones, engineered to dramatically reduce drivetrain rotating mass for faster acceleration and improved responsiveness. Precision-machined from treated Grade 5 (Ti-6Al-4V) titanium, these CVA bones are designed specifically for high-performance stock racing applications. Optimized for 17.5T and 21.5T classes, they help deliver sharper throttle response, smoother braking, and improved cornering agility. ⚡ Ultra-Lightweight Racing Advantage Weighing only 6.0g for the pair, these CVA bones are 38.78% lighter than standard bones, significantly reducing rotational inertia in the drivetrain. Less rotating mass allows the drivetrain to spin up and slow down faster, giving racers improved throttle control and braking response. This results in a car that feels more agile, responsive, and efficient on the track. 🏁 Improved Efficiency & Performance The reduction in drivetrain mass also improves overall efficiency, helping reduce motor load and lower motor temperatures during long runs. Combined with improved power transfer, this helps racers maintain consistent performance throughout heats and mains. ⚙️ Features Ultra-lightweight design at 6.0g per pair 38.78% lighter than standard CVA bones Precision-machined from treated Grade 5 (Ti-6Al-4V) titanium Reduces drivetrain rotational inertia Improves acceleration and braking response Enhances cornering agility and vehicle responsiveness Improves drivetrain efficiency and power transfer Helps reduce motor temperatures Laser-etched logos and identification markings 📦 Includes (2) Titanium CVA Bones 🔧 Compatibility TLR 22X TLR 22 5.0 Replaces: TLR232138 A premium performance upgrade for competitive racers looking to reduce drivetrain weight, improve responsiveness, and maximize efficiency on the track.  

Read more less

🏁 Clean Look. Lightweight Upgrade. Precision Fit. Upgrade your sway bar setup with this R1WURKS aluminum hardware set, designed to replace the stock components with a lightweight, blacked-out look and precise fit. 🏁 About the Sway Bar Hardware Set ⚙️ Lightweight & Durable Machined from high-strength 7075-T6 aluminum, these components offer a solid balance of durability and reduced weight. 🎯 Precision Fit CNC machining ensures accurate fitment and smooth operation, helping maintain consistent sway bar performance. 🖤 Clean, Blacked-Out Style Finished in matte black anodizing with subtle R1 laser-etched branding for a sleek, professional appearance. 🔧 Key Features ✔ 7075-T6 aluminum construction✔ Precision CNC-machined components✔ Matte black anodized finish✔ Laser-etched R1 branding✔ Lightweight sway bar balls✔ Direct replacement upgrade 📦 Includes (2) Sway Bar Bearing Collars (2) Sway Bar Balls (4) M3x3 Set Screws 🚗 Compatibility Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated RC10 B84 Team Associated RC10 B84D Team Associated RC10 B7 Team Associated RC10 B7D 🏁 Simple upgrade. Clean look. Dialed performance.  

Read more less

Dial in your front-end feel with precision balance and smoother steering control. The R1WURKS B7 Series 10g Front Ball Stud Mount Weight is a simple drop-in upgrade that adds stability, traction, and predictability to the nose of your buggy—especially in conditions where the front end needs extra bite. Why Add Front-End Weight? Adding a small amount of mass to the front of your buggy can: Increase front-end traction Improve initial steering response Enhance mid-corner stability Reduce front-end bounce for smoother handling Help balance overall weight distribution when paired with battery placement adjustments Features High-quality brass construction Precision CNC machining Engraved for quick identification True drop-in fitment for the R1WURKS B7 ball stud mount Included (1) 10g Brass Weight (1) M2.5x8 Button Head Screw  

Read more less

Upgrade your front end with precision, strength, and expanded tuning capability. Weighing just 10.9 grams, this aluminum R1WURKS B7 Front Ball Stud Mount is lighter than the stock plastic piece and adds two in-between ball stud positions for finer camber-link tuning. It also accepts the optional 10g internal weight for racers who want added front-end stability (sold separately). Features Skeletonized design for optimal strength-to-weight balance 0.6g lighter than the stock plastic mount High-strength 7075-T6 aluminum construction Precision CNC-machined for exact fit and alignment Matte black anodized finish with laser-etched R1 branding Two additional in-between camber link mounting holes Compatible with optional 10g internal weight Includes (1) R1WURKS B7 Front Ball Stud Mount, Aluminum Fitment B7 B7D T7 SC7 For best results, apply low-strength blue thread locker to all screws and tighten until snug. Avoid overtightening.

Read more less

Keep your drivetrain running smooth and protected with R1WURKS Black WS2 Grease. Specially formulated for high-performance RC applications, this grease is ideal for universal joints, dogbones, drive cups, and other high-load drivetrain components where reduced friction and long-lasting lubrication are critical. Infused with WS2 (Tungsten Disulfide) particles, this grease provides exceptional lubrication under extreme pressure while maintaining smooth performance even at elevated temperatures. ⚙️ High-Performance Drivetrain Lubrication The WS2 formula offers an extremely low coefficient of friction, helping drivetrain components operate more efficiently while reducing wear. With an impressive 300,000 PSI load-bearing capacity, it is designed to handle the heavy loads and impacts commonly experienced in RC racing and bashing. 🔧 Built for Extreme Conditions R1WURKS Black WS2 Grease is engineered to remain stable even in harsh environments. Its high dropping point allows it to stay fluid at high temperatures, preventing the grease from breaking down or solidifying during demanding runs. It also provides strong resistance against water, rust, and humidity, helping protect components from corrosion and long-term wear. ⚡ Features Designed for RC drivetrain components Ideal for dogbones, drive cups, and universal joints WS2 (Tungsten Disulfide) lubrication technology Extremely low coefficient of friction 300,000 PSI load-bearing capacity Excellent resistance to water, rust, and humidity High-temperature stability Resists abrasion and extreme pressure 📦 Includes (1) 3g Tube of R1WURKS Black WS2 Grease A must-have maintenance product for racers and builders looking to reduce drivetrain friction, protect components, and maintain peak performance.  

Read more less

The R1WURKS Slipper Eliminator Gear is a precision-machined 48-pitch spur gear designed specifically for use with slipper eliminator hubs. Made from POM (Polyoxymethylene), this gear delivers low friction, excellent wear resistance, and consistent performance—ideal for stock racers running a locked-out drivetrain. Featuring a standard inner bore and bolt pattern, this gear fits most slipper eliminator hubs, including the R1WURKS B7 hub. Features & Specifications 48-Pitch spur gear Precision machined for accuracy and concentricity Made from POM (Polyoxymethylene) Low friction High durability Excellent wear resistance Standard inner bore and bolt pattern Designed for slipper eliminator setups Options 69 Tooth – 900055-69 72 Tooth – 900055-72 Includes (1) Precision machined slipper eliminator gear(Select desired tooth count) Fitment Team Associated RC10 B7 fitted with R1WURKS 900054-1 B7 Slipper Eliminator Hub or similar aftermarket hub Team Associated RC10 B7D fitted with R1WURKS 900054-1 B7 Slipper Eliminator Hub or similar aftermarket hub A lightweight, durable spur gear built for racers running slipper eliminators who want smooth power transfer and long service life. 🏁

Read more less

The Racers Edge 11-Piece Complete Tool Set is a versatile, all-in-one kit designed for RC racers and hobbyists who want everything they need in one organized package. Featuring ergonomic 25mm composite handles, essential hex and nut drivers, cutting tools, and a durable storage case, this set is perfect for the track, pit table, or home bench. Features Ergonomic 25mm large lightweight composite handles High-grip design for comfort and control Covers common RC assembly, maintenance, and setup needs Organized storage with clear box and zipper transport case Includes 1 × Hex Wrench 1.5mm 1 × Hex Wrench 2.0mm 1 × Hex Wrench 2.5mm 1 × Hex Wrench 3.0mm 1 × Steel 5.5mm Nut Driver 1 × Steel 7mm Wheel Nut Driver 1 × Curved Lexan Scissors 1 × Sprue / Side / Tire Cutters 1 × Aluminum Hobby Knife w/ #11 Blade 1 × Turnbuckle Wrench (3.2, 4, 5, 5.5, 7 & 8mm) 1 × Cleaning Brush 1 × Clear Storage Box (245 × 175 × 38mm) Storage / Transport Zipper Case Specifications Overall Dimensions: 285 × 180 × 50mm A great all-around tool kit for beginners and experienced racers alike—perfect for keeping your pit setup clean, organized, and ready to race. 🏁

Read more less

A next-generation surface radio for drivers who want full control, deep customization, and open-source freedom.The RadioMaster MT12 is the first surface transmitter officially supported by EdgeTX, ExpressLRS, and the Multi-Module Project — making it one of the most versatile radios ever developed for RC cars, trucks, crawlers, boats, robotics, and more. With 10 physical inputs, up to 32 channels, and a fully modular RF design, the MT12 gives you the tools to build, tune, and control anything from mild to wild. ⚠️ Pre-Order Notice: First batch ships November 20th. 🚀 Why the MT12 Is a Game-Changer Official support for EdgeTX + ExpressLRS + Multi-Module Choose built-in 4-in-1 MPM or ExpressLRS Up to 32 channels for complex rigs* Hall-effect steering and throttle sensors Modular Nano-bay for external transmitters Oversized battery bay for 2×18650 or 2S 5000mAh LiPo USB-C fast charging (QC3.0 — 2A max) Compact, ergonomic, and highly customizable *32 channels requires 4-in-1 version + external module + compatible receivers 🧠 Open-Source Power EdgeTX installed out of the box Deep programming, mixes, and logic options Fully user-tunable behavior and controls Save, backup, and share model profiles Firmware upgrades via USB-C or SD card This is the radio for drivers who want control without limitations. 📐 MT12 Specifications Dimensions: 177.8 × 118.4 × 207.8 mmWeight: 480gOperating Frequency: 2.400–2.480GHzInternal RF Module: 4-in-1 Multi-ProtocolChannels: 16 standard, up to 32*Current Draw: 160mA (4-in-1)Voltage: DC 6.6–8.4VDisplay: 128×64 mono LCDSensors: Hall-effect steering + triggerModule Bay: Nano sizeCharging: USB-C (built-in)Batteries: 2×18650 or 2S 7.4V (not included) 📦 What’s Included (1) RadioMaster MT12 Surface Transmitter (1) R85C 5-Channel Receiver Manual + Accessories 📡 R85C Receiver (Included) FrSky D8 / D16 + Futaba SFHSS compatible 5-channel PWM output Built-in TCXO for frequency stability High-sensitivity 2.4GHz antenna Weight: 5.7g Size: 31×18.5×13 mm Voltage: 4.5–8.4V Telemetry: 100mW Perfect for small RC builds, crawlers, boats, robotics, and DIY projects. 🏁 Who It’s For The MT12 is ideal for: RC crawlers & scale rigs Racing & bashers Boats Robotics & mechatronics Multi-servo custom builds Engineering projects Experimental vehicles Anything unusual, wild, or complex If your project needs more inputs, more channels, and more customization, this is the next-level radio you’ve been waiting for. ⭐ Why Drivers Love It Endless flexibility Ultra-precise inputs Modular RF ecosystem Incredible value for features Community-driven development This is not just another surface radio — it’s a platform. 🔋 Battery Options 2× 18650 Li-ion cells, or 2S 7.4V 5000mAh pack Batteries NOT included 🧰 Expandability Works with: RadioMaster Ranger Nano RM 4-in-1 External Module TBS Crossfire Nano ExpressLRS modules Multi-protocol receivers SBUS, PWM, PPM, CRSF, and more (module dependent) Flight-radio-tier flexibility in a surface-focused form factor. 🎯 Summary Powerful. Open-source. Modular. Future-proof. The RadioMaster MT12 sets a new standard for surface radios with unmatched customization, expandability, and controller feel — ready to drive anything you can imagine.  

Read more less