Pacer Technology Zip-Kicker Aerosol CA Accelerator – 5oz Instantly Speed Up CA Glue Curing The Pacer Zip-Kicker is a must-have for hobbyists and builders using cyanoacrylate (CA) glues. This accelerator dramatically reduces curing time, allowing you to continue working without delay. Ideal for bonding tough materials and quick repairs! 🧪 Features: ✅ Fast-Acting Formula – Instantly cures most CA adhesives ✅ Aerosol Spray Can – Easy, even application ✅ Cleaner Bonds – Helps reduce blooming and fogging ✅ Works on Tough Surfaces – Great for metal, plastic, rubber, and more 📦 Specifications: Application Type: Aerosol Can Size: 5 Ounce Viscosity: Medium Adhesive Type: Accelerator 🛠 Perfect for use in RC, modeling, crafts, and DIY projects. Just apply CA glue, spray Zip-Kicker, and let the bond set in seconds!  

Read more less

Charge your 2S LiPo packs with PN Racing’s 4mm Banana Plug to JST-PH charging cable. Perfect for GL Racing, Atomic AMZ/BZ, Jomurema, and any other 2S LiPo batteries with a JST-PH connector, this cable connects directly to standard charger ports and balance boards. ✅ Universal Compatibility – Works with GL Racing, Atomic AMZ/BZ, Jomurema, and other JST-PH 2S LiPo batteries✅ 4mm Banana Plugs – Connects easily to most modern chargers✅ Durable Build – PE wrap protection for safe, long-lasting use✅ Premium Wiring – 14AWG silicone wire for power / 22AWG for balance lead✅ Convenient Length – 25cm cable keeps your pit setup neat and flexible Specifications: Length: 25cm Plug: 4mm Banana → JST-PH Wire: 14AWG (power), 22AWG (balance) Protective Wrap: PE sheath A must-have pit accessory, the PN Racing 4mm Banana to JST-PH charging cable makes charging your Mini-Z LiPo packs simple, safe, and reliable.    

Read more less

Charge up to three packs at once with PN Racing’s 4mm Banana Plug to XH Parallel Charging Cable. Perfect for SCX24 stock batteries and any 2S LiPo with an XH connector, this cable makes charging and balancing multiple packs simple and efficient. ✅ Parallel Charging – Features 3x XH connectors to charge or discharge up to three packs at once✅ Safe & Flexible – Works with just one battery, or up to three (must be same type & capacity when charging together)✅ Perfect for SCX24 – Recommended charge rate 0.35A–0.5A for stock batteries✅ Durable Build – PE wrap protection with high-quality silicone wire✅ Premium Wiring – 14AWG for power / 22AWG for balance lead Specifications: Length: 18cm Plug: 4mm Banana → 3x XH Connectors Wire: 14AWG (power), 22AWG (balance) Protective Wrap: PE sheath Recommended Max Charge Rate: ≤1A ⚠️ Attention: Do not exceed 1A charge current. When charging multiple packs, use only batteries of the same type and capacity. Efficient, safe, and race-ready — the PN Racing Parallel Charging Cable is a must-have for anyone managing multiple small LiPo packs.    

Read more less

Unlock serious power in your 1/28 scale racer with the PN Racing Anima V4 30A ESC. Built ultra-small, ultra-light, and competition-ready, this sensored brushless ESC delivers massive output in a tiny package with CNC metal housing for excellent heat dissipation. ✅ Tiny Size, Big Power – Designed specifically for 1/27–1/28 scale cars✅ 30A Continuous / 80A Peak – Handles even the hottest setups with ease✅ Ultra Lightweight – Only 7.1g (without wires) to keep your car nimble✅ CNC Aluminum Housing – Superior cooling and durability✅ Fully Adjustable – Multiple programmable parameters for fine-tuned performance Specifications: Input Voltage: 2S LiPo (6.0V–8.4V) BEC: 6V/7.4V 3A Continuous Current: 30A Peak Current: 80A Motor Size Limit: 1525 / 1626 Motor Maximum: 10,000Kv (0° timing) Size: 19.5 × 13.7 × 11.0mm (excluding plug) Weight: 7.1g (without wires) Package Includes: (1) Anima V4 30A ESC (1) 80mm Motor Sensor Wire (PN Anima Motors #500822) (1) 100mm Motor Sensor Wire (PN Anima Motors #50085) (1) 125mm Motor Sensor Wire (Atomic / Hobbywing / MWX motors) (1) Wire Connector (ESC to Receiver #500826) (1) JST2.0 Female Plug to 2S LiPo Battery Adapter Compact, powerful, and built for racers — the PN Racing Anima V4 ESC is the ultimate upgrade for serious Mini-Z competitors.  

Read more less

Upgrade your Jomurema GT01 setup with the PN Racing Front Bumper Body Mount Plate. Built from durable black PETG material, this mount plate is designed for a precise fit and reliable performance. Perfect for racers who want a clean and secure body installation. ✅ Direct Fit – Compatible with the Jomurema GT01 body✅ Durable PETG Construction – Strong, lightweight, and track-ready✅ Essential Upgrade – Provides proper mounting support for GT01 body Requirements: CP950 Jomurema GT01 Carbon Fiber Adapter Jomurema GT01 Car Body Set Material: Black PETGPart #: BMB950 Secure your GT01 body the right way with PN Racing’s Front Bumper Body Mount Plate — built for performance and durability.  

Read more less

Keep your Mini-Z running strong with PN Racing’s High Power 750mAh Ni-MH AAA batteries. Built for racing, these cells deliver high voltage output over time, giving you the consistent performance needed for competitive runs. ✅ High Voltage Output – Maintains strong power throughout the run✅ Optimized Charging – Recommend charge rate: 0.7–1.0A for the best balance of power and runtime✅ Race Ready – Trusted by Mini-Z racers worldwide✅ Convenient Pack – Includes 4 matched AAA rechargeable batteries Specifications: Capacity: 750mAh Size: AAA Quantity: 4pcs Reliable, rechargeable, and race-proven — the PN Racing HP750 Ni-MH batteries are the perfect power solution for your Mini-Z.  

Read more less

Step up your runtime with PN Racing’s High Power 900mAh Ni-MH AAA batteries. Designed for Mini-Z racing, these cells deliver high voltage output over time with even longer endurance than the HP750 pack — perfect for racers who want more laps per charge. ✅ High Voltage Output – Consistent power delivery from start to finish✅ Optimized Charging – Recommend charge rate: 0.7–1.0A for best balance of power and runtime✅ Extended Capacity – 900mAh for longer sessions between charges✅ Race Proven – Trusted by competitive Mini-Z racers✅ Convenient Pack – Includes 4 matched AAA rechargeable batteries Specifications: Capacity: 900mAh Size: AAA Quantity: 4pcs With extra capacity and the same race-proven reliability, the PN Racing HP900 Ni-MH batteries give your Mini-Z the endurance to outlast the competition.  

Read more less

Upgrade your drivetrain with PN Racing’s high-precision machine cut Delrin pinions. Designed with extra length for secure mounting, these lightweight black Delrin gears deliver smooth and efficient power transfer for high-performance 1/10 scale applications. 🔥 Key Features: Available in 9T–16T tooth counts (Part #MR2709–MR2716) 64 pitch for precise, fine gearing adjustments Made from machine cut black Delrin for smooth mesh and lightweight performance Extra length (10.5mm) keeps the pinion fully seated on the motor shaft Perfect for optimizing gear ratios in stock and modified classes ✅ Compatibility: Fits most 1/10 scale vehicles using 64 pitch spur gears Compatible with Touring Car (TC6.2, TC7.1, TC7.2, TC7.4) Also works with RC10 series and other 64P setups (check your manual for fitment) 📦 Includes: (2) 64P Long Delrin Pinion Gears (tooth count based on selected part #) ⚠️ Note:Select the correct tooth count (9T–16T) based on track layout and motor timing for best performance.

Read more less

Keep your Mini car safe and supported with the PN Racing Mini Car Foam Stand. Designed to support the car from front to rear, this stand is a perfect fit for use on the PN MR02 setup board, covering all the pins while providing a stable resting place. ✅ Full Support Design – Holds your car securely from front to rear✅ Setup Board Compatible – Fits PN MR02 setup board, covering all pins✅ Durable Foam Construction – Lightweight, safe, and non-scratching✅ Color Options – Available in Orange, Blue, or Black Includes: 1x Mini Car Foam StandPart #: 700650 A must-have accessory for storage, display, or setup adjustments — the PN Racing Foam Stand combines convenience with professional-grade support.

Read more less

Give your Mini-Z the F1-inspired look with PN Racing’s machine-cut 10-spoke front wheels. Designed for 2WD Mini-Z platforms, these wheels combine lightweight precision with sleek, aggressive styling. Available in Yellow or White, and in multiple offsets (F0–F3) to fine-tune your setup. ✅ F1 Style – 10-spoke design brings open-wheel race car looks to your Mini-Z✅ Machine Cut – Ensures perfect balance and smooth performance on track✅ Multiple Offsets – Choose F0–F3 for the exact stance and handling you need✅ Color Choices – Bold Yellow or Crisp White to match your build Step up your Mini-Z’s style and performance with PN Racing’s 10-Spoke F1 Wheels – the perfect upgrade for racers who want both speed and looks.  

Read more less

Add style and performance to your Mini-Z with these precision machine-cut 16-spoke front wheels from PN Racing. Available in Yellow or White, they’re designed for 2WD Mini-Z platforms, delivering both looks and consistent race-winning performance. ✅ Machine Cut Precision – Lightweight and true for smooth, consistent handling✅ 16-Spoke Design – Classic race styling with maximum strength✅ Multiple Offsets – Choose the fitment (F0–F3) to dial in your setup✅ Color Options – Bold Yellow or Clean White to match your build Whether you’re fine-tuning your Mini-Z for competition or just upgrading the look, PN Racing’s 16-Spoke Front Wheels are the perfect balance of style, strength, and performance.

Read more less

Complete your Mini-Z setup with PN Racing’s machine-cut 16-spoke rear wheels, built for 2WD Mini-Z platforms. Designed to pair perfectly with the matching fronts, these rears deliver durability, precision, and a race-ready look. Available in Yellow or White, with multiple offsets to fine-tune your stance and handling. ✅ Machine Cut Precision – Lightweight and true for smooth, consistent traction✅ 16-Spoke Rear Design – Classic race styling with added strength where it counts✅ Multiple Offsets (R0–R3) – Dial in your rear track width for optimal grip✅ Color Options – Bold Yellow or Crisp White to match your build Lock in performance and style with PN Racing’s 16-Spoke Rear Wheels — the perfect finish to your Mini-Z racing setup.

Read more less

Race with style and performance using the PN Racing Concept C9 ABS Car Body Kit, officially allowed for the PNWC 2024 Paris 2WD Stock and GTLM Super Stock classes. Available in Yellow, White, or Orange, this high-quality ABS body is ready to mount, paint optional. ✅ PNWC 2024 Legal – Approved for 2WD Stock & GTLM Super Stock class✅ Configurable 98mm Wheelbase – Perfect fit for competitive setups✅ Glossy Finish ABS – Paint optional thanks to durable yellow, white, or orange material✅ Reversible Side Body Clip – Adjust body height by 1mm for fine tuning✅ Detailed Accessories – Includes Lexan roof/spoiler, clear & red light lenses, and stickers Includes: ABS Concept C9 Body (Yellow, White, or Orange) Lexan Roof Lexan Spoiler Front & Side Body Clips Headlight/Taillight Lenses (Clear & Red) Screws PN Racing UV Transfer Sticker Requirements (compatible with): Kyosho Mini-Z MR-02, MR-03, PN 2.5W GL Racing GLA, GLR Atomic AMZ, BZ Part Numbers: Yellow – 600500Y White – 600500W Orange – 600500O

Read more less

  Race-proven performance from PN Racing’s KS Compound series — designed specifically for RCP tracks and trusted by top Mini-Z drivers worldwide. These 8.5mm low-profile slick front tires deliver consistent grip, predictable handling, and long-lasting durability. ✅ Low Profile Advantage – At just 1.6mm thick, these mount on 20mm rims for a 23.2mm overall diameter, keeping your Mini-Z planted and responsive.✅ KS Compound Technology – Offers more grip as the tires heat up, making them ideal for long runs and endurance racing.✅ Easy Break-In – For stock class, no truing required — just run a pack and the tires will settle in.✅ Advanced Tuning – In higher classes, only a light true (0.1–0.2mm) is needed for a perfect racing surface.✅ Compound Options – Pick the grip level that matches your track and driving style: KS1130 Super Soft (8.5mm) – Maximum bite KS1134 Soft (8.5mm) – Strong grip, balanced feel KS1138 Medium (8.5mm) – Consistent, versatile KS1142 Hard (8.5mm) – Durable, steady handling Take control of your Mini-Z’s front-end grip with PN Racing’s KS Compound 8.5mm Slicks — engineered for speed, consistency, and championship results.

Read more less

Get proven rear-end traction with PN Racing’s KS-M Compound Radial Rear Tires, built for consistent performance on RCP tracks. The KS-M compound offers quick warm-up and strong grip from the very first lap — perfect for sprint races, cold climates, or any time you need dependable traction right away. ✅ KS-M Compound Advantage – Delivers instant grip and stability without long warm-up✅ Radial Rear Design – Improves rear-end balance and cornering consistency✅ Race Proven – Trusted by Mini-Z racers for predictable handling and long-lasting performance✅ Compound Options – Tailor your setup with the grip level you need: KS220 Super Soft (22 Shore) – Maximum traction KS224 Soft (24 Shore) – Strong grip, balanced feel KS230 Medium (30 Shore) – All-around performance and durability For racers chasing rear stability and consistent handling, PN Racing’s KS-M Compound Radial Rear Tires are a go-to upgrade.

Read more less

Get instant traction with PN Racing’s KS-M Compound 8.5mm low-profile slick front tires. Designed for RCP tracks and colder conditions, these tires deliver quick warm-up grip and consistent handling from the very first lap. ✅ KS-M Compound Technology – Provides strong grip right away, making it ideal for short races, sprint heats, and cooler track temps.✅ Low Profile Design – At just 1.6mm thick, they mount on 20mm rims for a 23.2mm overall diameter, giving your Mini-Z sharp steering and balance.✅ Easy Break-In – No heavy prep needed — just run a pack and the surface will set in naturally.✅ Advanced Class Ready – For precision racers, a light true of 0.1–0.2mm is all that’s needed for perfect contact.✅ Compound Options – Choose your grip level: KSM530 Super Soft (8.5mm) – Maximum bite, fastest warm-up KSM534 Soft (8.5mm) – Excellent grip with a stable feel KSM538 Medium (8.5mm) – Balanced option for most track conditions KSM542 Hard (8.5mm) – Durable choice with steady, predictable handling Race with confidence in any climate — PN Racing’s KS-M Compound Slicks are engineered for fast warm-up, dependable grip, and winning consistency.  

Read more less

The all-new PN Racing KS-M Compound series (packaged in a green bag) is race-proven and designed for consistent performance right from the first lap. Built for RCP tracks, these slick front tires deliver dependable grip and precise handling across a wide range of track conditions. ✅ KS-M Compound Technology – Quick warm-up, strong grip from the start, perfect for cooler climates or sprint racing✅ Race-Proven Performance – Trusted by top Mini-Z racers worldwide✅ Easy Break-In – No heavy prep needed, just run and go✅ Compound Options – Fine-tune your Mini-Z with the right grip level: KSM130 Super Soft (38 Shore) – Maximum initial bite KSM134 Soft (38 Shore) – Strong, consistent grip KSM138 Medium (38 Shore) – Balanced durability and traction For drivers who demand quick warm-up and reliable grip, PN Racing’s KS-M Compound Slicks are the go-to choice.

Read more less

Dial in maximum traction with PN Racing’s KS-M Compound Type-F Rear Tires. Designed for RCP tracks, these radial rears deliver quick warm-up and reliable grip from the first lap, making them perfect for both competitive racing and consistent practice sessions. ✅ KS-M Compound Advantage – Instant grip on cooler tracks, no long warm-up required✅ Type-F Radial Pattern – Optimized for stable rear-end traction and predictable handling✅ Race Proven – Engineered for Mini-Z drivers demanding performance and consistency✅ Compound Options – Choose the level of grip you need: KS320 Super Soft (20 Shore) – Maximum bite, highest grip KS324 Soft (24 Shore) – Strong grip with smooth balance KS330 Medium (30 Shore) – All-around performance and durability KS334 Firm (34 Shore) – Added stability, less tire wear KS338 Extra Firm (38 Shore) – Longest lasting, steady handling Take your Mini-Z to the next level with PN Racing’s KS-M Compound Type-F Rear Tires — the perfect balance of grip, stability, and durability for every track condition.  

Read more less

Upgrade your PN Lexan Pan Car Body setup with the Carbon Fiber Front Bumper (600800E). Lightweight, durable, and precision-cut, this bumper improves rigidity and provides secure mounting for serious Mini-Z racers. ✅ High-Strength Carbon Fiber – Strong and lightweight for competitive racing✅ Precision Fit – Designed specifically for PN Lexan Pan Car Body systems✅ Easy Upgrade – Direct replacement for the stock fiberglass bumper Requirements: PN Lexan Pan Car Body (600800A) PN Lexan Pan Car Body Mount Posts (600800D) Material: Carbon FiberPart #: 600800E Take your Mini-Z pan car build to the next level with carbon precision and race-ready durability.

Read more less

Easily mount Lexan racing bodies on your Mini-Z MR02, MR03, or PN2.5 chassis with the PN Racing 600800K Body Mounting Kit. Designed for secure fitment and durability, this kit includes everything needed to get your body properly mounted and track-ready. ✅ Compatible with MR02, MR03 & PN2.5 Chassis – Perfect fit for popular Mini-Z platforms✅ Durable Fiber Glass Plates – Strong front bumper & side mounts for long-lasting use✅ Complete Mounting Hardware – Posts, clips, and screws included Includes: (1) Fiber Glass Front Bumper (1) Fiber Glass Side Body Post Mount Plate (4) Body Posts (35mm) (4) Body Clips (4) M2x4 Countersunk Screws Part #: 600800K A must-have for racers running Lexan racing bodies on their Mini-Z setups — secure, lightweight, and race-ready.

Read more less

Upgrade your Mini-Z with the PN Racing V2 Aluminum Interchangeable Front Body Mount Base. Made from high-strength aluminum, this mount replaces the stock Kyosho plastic base for improved durability and precision. Perfect for racers who swap bodies often, this system works with PN’s interchangeable carbon fiber adapter plates for quick and hassle-free changes. ✅ Durable Aluminum Construction – Stronger and longer lasting than stock plastic✅ Quick Body Swaps – Works with PN carbon fiber adapter plates (CPxxx)✅ Protects Your Chassis – Reduces wear on screw holes during frequent changes✅ Adjustable Fit – Add 0.3mm shims (BP801) for body height tuning Requirements: Body-specific PN carbon fiber adapter (CPxxx, matches Kyosho ASC base part numbers, e.g. CP201 for Ferrari ENZO) Color: OrangeMaterial: Aluminum Includes: (1) Aluminum Mount Base (2) M2x6 Screws (2) M2x8 Screws Part #: BM001A Take your Mini-Z body mounting system to the next level with the PN Racing V2 Aluminum Front Body Mount Base — built tough for racers who demand precision and flexibility.

Read more less

Upgrade your Mini-Z 2WD drivetrain with PN Racing PNWC Machine Cut Delrin Pinions. These high-precision 64 pitch pinions are built from durable Delrin material and feature an extra-long 10.5mm profile to ensure a secure hold on the motor shaft. The Yellow series delivers smooth, efficient mesh and lightweight performance for serious Mini-Z racers. 🔥 Key Features: Available in 9T–16T tooth counts: #MR2709WC – 9T #MR2710WC – 10T #MR2711WC – 11T #MR2712WC – 12T #MR2713WC – 13T #MR2714WC – 14T #MR2715WC – 15T #MR2716WC – 16T 64 pitch for precise gearing adjustments Machine cut Delrin for accuracy and smooth operation Extra length (10.5mm) keeps the pinion fully seated on the Mini-Z motor shaft Lightweight construction reduces rotating mass while maintaining durability ✅ Compatibility: Kyosho Mini-Z 2WD (1/28 scale) PN Racing Mini-Z upgrade platforms Other 1/28 scale cars using 64P spur gears 📦 Includes: (2) 64P Long Delrin Pinion Gears (per selected tooth count) ⚠️ Tip:Choose tooth count to match your track: Lower tooth (9T–11T) = more torque Higher tooth (12T–16T) = more top speed

Read more less

Power your 1/28 scale racer with PN Racing’s V5 LiPo 2S 7.6V HV Hardcase Battery. Built for maximum performance, this pack delivers high voltage under load, low internal resistance, and the reliability racers demand. Includes free charging cable and bullet plugs for easy setup. ✅ High Voltage, Low Resistance – Strong, consistent power delivery during runs✅ Perfect Fit – Designed for 1/28 scale cars including: Atomic: BZ, AMZ, FFZ, MRZ, SZ GL Racing: GLA, GLR, GLR-GT, GLF, GLD RTRC chassis✅ Racing-Grade Specs – 60C discharge rate for explosive performance✅ Durable Hardcase – Protects the pack during intense racing Specifications: Voltage: 7.6V HV (2S) Capacity: 360mAh Recommended Charge Rate: 0.8A C-Rate: 60C Cable: 24AWG Plug: Mini Bullet (includes 2 copper bullet plugs & free charging cable) Charging Cable Plug: JST-PH Type: Rectangular Size: 44.6 x 19.6 x 13mm (+/-0.5mm) Weight: 16.8g (+/-0.1g) Upgrade your Mini-Z or 1/28 scale racer with PN Racing’s V5 LiPo Hardcase — lightweight, powerful, and race-proven.

Read more less

Keep your wiring neat and secure with the PN Racing Wire Holder Set. Designed for 22AWG wires and sensor wires, these compact holders help organize your chassis and prevent messy wire routing. Perfect for Mini-Z and other small RC builds where space is tight. ✅ Holds 22AWG wires & sensor wires securely✅ Compact size – ideal for Mini-Z and micro RC applications✅ Prevents tangling and improves wire management✅ Includes 10pcs per pack Includes: (10) Wire Holders Upgrade your wiring layout and keep your build clean with the PN Racing Wire Holder set — simple, effective, and racer-approved.  

Read more less

Charge your 2S LiPo packs with confidence using PN Racing’s XT60 Female to JST-PH charging cable. Designed for GL Racing, Atomic AMZ/BZ, Jomurema, and other 2S LiPo batteries with a JST-PH connector, this cable gives you extra length and flexibility compared to the 25cm version. ✅ Universal Fit – Compatible with GL Racing, Atomic AMZ/BZ, Jomurema, and other 2S LiPo JST-PH batteries✅ XT60 Female Connector – Direct connection to most modern chargers and balance boards✅ Extra Length – 30cm cable for more flexibility in your charging setup✅ Durable Build – Protected by PE wrap for safety and longevity✅ Premium Wiring – 14AWG silicone wire for power / 22AWG for balance lead Specifications: Length: 30cm Plug: XT60 Female → JST-PH Wire: 14AWG (power), 22AWG (balance) Protective Wrap: PE sheath With added reach and the same PN Racing quality, the 30cm XT60 to JST-PH charging cable is the perfect pit upgrade for reliable and flexible LiPo charging.  

Read more less

Get ready to rip across the water with the Pro Boat Sonicwake 24"!Built for speed, stability, and ease of use, this ready-to-run brushless boat is perfect for ponds, park lakes, and pure adrenaline fun. With a powerful brushless system, self-righting hull, and included Spektrum Smart battery and charger—this boat is ready to hit the water right out of the box. 💥 Key Features: Self-Righting Deep-V Hull: Flips itself back over if it capsizes—no rescue mission needed Spektrum Brushless Power System: 3542 2500Kv motor + 50A ESC for high-speed thrills Spektrum SLT2 2.4GHz Radio System: Precise, interference-free control Breakaway Rudder: Swings back on impact to prevent damage Double-Sealed Canopy: Protects electronics with secure, splash-resistant design SSL Battery Mounting System: Tool-free install and removal Smart Battery Tech: Easier, safer charging with included 3S 3200mAh LiPo and USB-C Smart charger 📦 Includes: (1) Sonicwake 24" Deep-V RTR Brushless Boat (1) Spektrum 3542 2500Kv Brushless Outrunner Marine Motor (installed) (1) Spektrum 50A Smart Marine ESC w/IC3 (installed) (1) Pro Boat 5.3kg Analog Servo (installed) (1) Spektrum SR215 DSMR 2-Channel Receiver (installed) (1) Spektrum SLT2 2.4GHz Transmitter (1) Spektrum 3S 3200mAh 30C Smart LiPo Battery (1) Spektrum S120 USB-C Smart Charger (1) Boat Stand (4) AA Batteries for Transmitter (1) Product Manual 🔧 Needed to Complete: Nothing! Everything you need is included in the box. 📐 Specifications: Length: 24 in (610mm) Width: 7.09 in (180mm) Height: 4.3 in (109mm) Weight: 45.6 oz (1292.74g) Hull Material: Injection Molded ABS Motor Type: Brushless Power Source: 3S LiPo (11.1V) Scale: Standard Completion Level: Ready-to-Run (RTR) 🔥 Beginner-friendly. Expert-approved.The Sonicwake 24" is a compact, high-performance RC boat that’s as tough as it is fun. Whether you’re racing or just ripping water, this boat is everything you need in one box.

Read more less

Summertime excitement in a size you can take anywhere! The Sprintjet 9" Deep-V Jet Boat delivers powerful performance and nonstop fun thanks to its self-righting design, jet pump system, and ready-to-run setup. Just charge the included LiPo battery and hit the water! Compact 9" Deep-V hull — perfect for pools, ponds, or lakes Self-righting hull design for worry-free fun Potent 390 brushed motor with jet pump drive system Includes Dynamite® 7.4V 600mAh LiPo battery & USB Smart Charger 9–12 minutes of run-time per charge 2.4GHz Pro Boat radio system for interference-free control Injection-molded ABS hull with crisp, durable lines Waterproof steering servo and 3-in-1 ESC/RX for reliability Includes everything you need: Sprintjet boat, LiPo battery, Pro Boat transmitter, Smart charger, USB cable, and manual. The PRB08045 Sprintjet is small, fast, and ready for action — your portable ticket to all-day summer fun on the water!  

Read more less

Tackle Any Terrain. Bash With Confidence. Pro-Line’s Badlands 3.8" tires are built for the true off-road basher. With oversized motocross-inspired tread lugs and legendary M2 compound, these beasts deliver maximum traction in dirt, grass, and all-terrain environments. Now pre-mounted on durable Raid 8x32 wheels with removable hexes, they’re ready to handle serious punishment—while giving you the ability to replace hex hubs instead of entire wheels. Tire Features: Aggressive motocross-style tread with large lugs for insane traction Durable M2 compound for all-around bashing performance Designed for long-lasting tread life Made in the USA since 1982 Wheel Features: Raid 10-spoke design with black DuPont nylon construction Removable 17mm hex hubs (1/2” offset) – replace or upgrade without re-gluing tires Includes M3 x 12mm mounting screws Specs: Height: 5.85" (149mm) Width: 2.72" (69mm) Includes: (2) Pre-Mounted Badlands 3.8" Tires on Raid 8x32 Black Wheels (2) 8x32 to 17mm 1/2" Offset Hex Adapters (16) M3 x 12mm Screws

Read more less

Pro-Line Badlands MX Pre-Mounted 1/8 Buggy Tires are known for having sweet Motocross inspired tread and the Badlands MX tires kick that up a notch with a Bigger and Bolder knobby tread that matches modern MX tire design. The Badlands MX is a true All-Terrain tire that will find traction on any surface but is best suited for loose & loamy dirt, mud, or grass. The Badlands MX Tire is pre-mounted on Mach 10 Black Wheels so you don't have to worry about gluing your own tires or waiting for them to dry. All you need to do is slap them on your buggy and get to ripping up the dirt! The Mach 10 features 10 aggressive spokes that will make your off-road bash buggy look fast even sitting still. The Mach 10 wheels have a 17mm hex and are made from a single molded piece of high-quality Nylon proudly produced by Pro-Line in the USA!    Pro-Line Badlands MX All Terrain 1:8 Buggy Tires     Features: Tire: Awesome Motocross-Inspired Appearance Bigger, Bolder, and Badder than Ever Incredible Traction on Loose, Loamy or Muddy Terrain Improved Wear Resistance Combined with Modern Style Made from Pro-Lines Legendary M2 Race Rubber Less Time Gluing and More Time Having Fun Made in the USA, since 1982 - Read about Pro-Line Racing's History Wheel: Greater Stability and Connectivity For Use on Standard 17mm 1:8 Hexes Extremely True Finish Made from High Strength DuPont Nylon Wheels Also Available Un-Mounted Specifications: Height: 4.60" (117mm) Width: 1.72" (44mm) Includes: (2) Pre-mounted Badlands MX Tires Mounted on Black Mach 10 Wheels 

Read more less

Tear It Up—Without the Ballooning. Dominate dirt, grass, and loose terrain with confidence. The Pro-Line Badlands MX28 HP 2.8" Belted Tires bring unmatched traction and control with an aggressive motocross-inspired tread pattern. Pre-mounted on durable Raid 6x30 wheels, these tires are ready to rip and built to last. Tire Features: Molded-in herringbone weave high-performance belt prevents ballooning Aggressive MX-style tread for all-terrain grip—especially on loamy dirt, mud, and grass M2 compound for optimal balance of durability and grip Soft foam inserts included Made in the USA since 1982 Wheel Features: Raid 6x30 removable hex system – swap between narrow and wide 12mm offsets or upgrade to 14mm/17mm hexes Durable DuPont nylon construction Includes M3 x 12mm hex hardware Specs: Height: 5.02" (128mm) Width: 2.10" (53mm) Includes: (2) Pre-mounted Badlands MX28 HP 2.8" Tires on Raid 6x30 Black Wheels (2) 6x30 to 12mm Hex Adapters (Narrow & Wide) (12) M3 x 12mm Screws

Read more less

This is a set of two Pro-Line Black MX38 Badlands HP Belted 3.8" Truck Tires, Pre-Mounted on Raid wheels. Pro-Line Badlands tires are known for having a noticeable Motocross inspired tread and the updated Badlands MX38 HP tires improves on this with and even Bigger and Bolder knobby tread. The Badlands MX38 is a true All-Terrain tire that will find traction on any surface but is best suited for loose and loamy dirt, mud or grass. Pro-Line has used a refined processes to mold a High-Performance herringbone weave pattern Belt directly inside of the Badlands MX38 HP tires that will prevent the tire from ballooning or expanding during use. This design gives maximum control to put the power down even at high speeds. Quit wasting tires and lay down the power with a clear conscious. The Badlands MX38 HP 3.8" tires provide the incredible grip that you expect from Pro-Line due to the soft M2 compound and the aggressive Motocross inspired tread. In response to customer demand, Pro-line has designed an updated tire size to fit the current generation of Monster Trucks and the MX38 HP delivers at 3.48" wide and 6.8" tall. Features: Tire: Molded-in High-Performance Herringbone Weave Pattern Belt Aggressive Motocross Inspired Tread Design Badlands MX38 HP 3.8" tires Will Not Balloon or Expand During Use Soft M2 Compound Provides Incredible Grip on a Variety of Surfaces Belted Tires Give You Control to Put the Power Down Tire Size comes in at 3.48" wide and 6.8" tall Soft Foam Inserts Included Made in the USA, since 1982 Wheel: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 6.80" (173mm) Width: 3.48" (88mm) Includes: (2)  Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires on Raid wheels COMPATIBILITY: Arrma Kraton 6S BLXHPI Savage Flux HPHPI Savage XHPI Savage XLTekno RC MT410Traxxas RevoTraxxas SummitTraxxas T-Maxx

Read more less

Key Features Fits the front and rear 2WD and 4x4 Traxxas Slash Latest generation V2 SC wide carcass for increased contact patch Super aggressive motocross style tread for longevity and superior traction M2 (medium) compound Soft, reusable and waterproof closed cell foam inserts Removable hexes allow easy wheel offset changes, or upgrade to 14mm, 17mm and 12mm ProTrac Offset Hexes Fits any of Pro-Line's 6x30 Removable Wheel Hexes The two most common 12mm offset hexes are included Wheels constructed of high-strength DuPont nylon Overview Pro-Line is proud to introduce a next-generation Short Course wheel design – the Raid 2.2”/3.0” Removable Hex Wheel for all Short Course Tires! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! Now you can with the new 6x30 Removable Hex system from Pro-Line. The wheels include a pair of 12mm Slash® 4x4 Front/Rear (Slash® 2wd Rear) hexes and a pair of 12mm Slash® 2wd Front hexes that fit the most popular trucks. Optional 14mm, 17mm and ProTrac™ offset 12mm hexes (6355-00) are available separately to fit your exact application. Wheel hexes can be easily replaced without needing to replace your glued tires (6354-00 Replacement Slash® Hexes)! Uses Pro-Line's unique 6x30 interlocking hex design that is secured to the wheel by six M3 screws that are spaced 30mm across. Needed to Complete Nothing What's in the box? (2) Pro-Line Badlands Tires (2) Raid 2.2"/3.0" Black 6x30mm Removable Hex SC Wheels (2) Closed Cell Inserts (2) 6x30 - 12mm Hex Adapters (Slash 4x4 F and R and Slash 2wd F) 2 pcs of each size (12) M3x12mm Socket Head Cap Screw Hardware

Read more less

🏁 Authentic NASCAR Style Meets Pro-Line PerformanceBring true NASCAR® realism and performance to your Losi® racecar with the Pro-Line Goodyear® Eagle Pre-Mounted Retro Truck Tires. Featuring officially licensed Goodyear® yellow sidewall lettering, larger sidewalls, and replica steel wheels, these tires perfectly capture the look and handling of classic NASCAR Truck Series racers. ⚙️ About the Goodyear Eagle Tires Designed for both performance and scale detail, these tires transform your Losi NASCAR into a true showpiece on and off the track. The soft compound delivers consistent grip and control, while the taller sidewall improves scale realism and cornering dynamics—ideal for truck series builds and retro NASCAR setups. 🌟 Features Officially licensed by NASCAR® and Goodyear® Perfect for Truck Series or Retro NASCAR builds Larger sidewalls for authentic scale proportions Yellow Goodyear® Eagle sidewall lettering for true realism Mounted on replica steel wheels for period-correct looks Made in the USA by Pro-Line Racing Durable soft compound for balanced grip and longevity 📦 Includes (4) Goodyear™ Eagle Pre-Mounted Retro Truck Tires 📏 Specifications Spec Detail Scale 1/12 Overall Diameter 2.23 in (57 mm) Width 1.1 in (28 mm) Hex Size 8 mm 🔥 Upgrade your Losi NASCAR with the official Goodyear look — where scale style meets race-day performance!

Read more less

Give your Typhon GROM a classic off-road makeover with the Pro-Line Racing Class 1 VW Bug Clear Race Body Conversion Kit. Designed specifically for the 1/14 ARRMA Typhon GROM 223S DSC 4X4, this body delivers iconic VW styling while adding race-inspired details for a unique and aggressive look. ⚡ Features: Officially licensed Volkswagen® Bug design Fits ARRMA Typhon GROM 1/14 223S DSC 4X4 Clear polycarbonate for custom paint jobs Lightweight, durable construction Race-inspired scale styling 📦 Includes: (1) VW Bug Clear Body (1) Wing Set (1) Decal Sheet Window Masks Mounting Hardware Compatibility: ARRMA Typhon GROM 1/14 223S DSC 4X4 Part #: PRO368000T3

Read more less

🔥 Unstoppable Traction for Your Monster TruckThe Pro-Line Trencher X MX38 3.8" Tires, pre-mounted on Raid 8x32 Removable Hex Wheels, are built for drivers who demand maximum grip, control, and durability across every terrain. Whether you're bashing on asphalt, dirt, or grass — these tires deliver the ultimate blend of bite and stability. ⚙️ About the Trencher X Tires Featuring Pro-Line’s signature horizontal “H” tread pattern, the Trencher X offers incredible forward traction and side-to-side stability. With massive 1/4" tread blocks and an aggressive open pattern, these tires chew through loose dirt while maintaining balance on hard-packed surfaces. The M2 (medium) compound provides an excellent balance of grip and longevity, perfect for all-season bashing. 🛞 About the Raid 8x32 Wheels Mounted on Pro-Line’s Raid 8x32 wheels, these feature an innovative interlocking hex design that allows easy hex replacement if damaged. The strong DuPont nylon material provides lightweight toughness, while the 10-spoke styling gives your truck a bold, race-inspired look. Includes 17mm hex adapters and mounting hardware for direct fitment. 🌟 Features Tires: Aggressive horizontal “H” tread design for massive traction 1/4" tall tread for long-lasting performance Excellent durability and side-to-side stability M2 compound ideal for mixed surfaces Made in the USA since 1982 Wheels: Removable 8x32 hexes for easy replacement Includes 17mm hex adapters and mounting hardware High-strength DuPont nylon construction 10-spoke Raid design for a sleek, realistic look Made in the USA since 1982 📦 Includes (2) Pre-mounted Trencher X 3.8" Tires on Raid Black 8x32 Removable Hex Wheels (2) 8x32 to 17mm Hex Adapters (16) M3 x 12mm Socket Head Cap Screws 📏 Specifications Height: 6.50" (165mm) Width: 4.15" (105mm) 🔩 Compatibility Arrma Kraton 6S BLX Traxxas E-Revo VXL 2.0 Traxxas Summit 1/10 Tekno MT410 Other 1/8 and 1/10 Monster Trucks with 17mm Hexes 💥 The Pro-Line Trencher X MX38 is the ultimate bashing upgrade — dominate any terrain with unmatched traction, strength, and style!

Read more less

  The Pro-Line Badlands MX43 Pro-Loc All Terrain Tire is the ultimate tire solution for X-MAXX owners. Pro-Line Badlands take the Motocross inspired tread and elevate the look a Bigger and Bolder knobby tread that matches modern MX tires. These tires have been developed from the ground up for extreme X-MAXX punishment with an all-new ultra-durable compound that prevents tire ballooning even at high speeds. Pro-Line X-MAXX Impulse Pro-Loc Black Wheels feature a ground breaking Bead-Loc design that allows users to change tires or foams when necessary without worrying about the tires coming out of the bead. Pro-Line’s proprietary Pro-Loc Technology brings this feature to life and creates an ultra-secure bond between Pro-Line’s Pro-Loc Tires and Pro-Line’s Impulse Pro-Loc Wheels. The reinforced Tire bead of Pro-Line’s Pro-Loc Tires fits into a uniquely shaped channel on the wheel and the bead-loc screws actually pass through the tire rubber before being pinched by the outer bead-loc ring to create the maximum possible mounting security. Features: Tires Incredible Traction on Any Surface Ultra-Durable and Anti-Ballooning Tire Compound Aggressive Motocross-Inspired Appearance Reinforced Tire Bead Proprietary Pro-Loc Technology for Secure Tire Mounting Pairs perfectly with Pro-Line’s Impulse Pro-Loc wheels for X-MAXX® Foam Inserts Included Made in the USA, since 1982 Wheels Ground Breaking Pro-Loc Mounting Technology Change Tires or Foams and Re-use the Wheels Tough, Blacked-out Impulse Wheel styling Extra Thick, Extremely Durable to Take Serious X-MAXX® Abuse Stone Gray Bead-Loc Rings Stand Out from the Crowd Pairs perfectly with Pro-Line’s Badlands MX43 Pro-Loc Tires Made in the USA, since 1982

Read more less