Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex (2) Durable Upgrade for Precision Fit & Adjustable Offset Upgrade your RC10 with the precision and strength of the Team Associated 7.0mm Factory Team Aluminum Clamping Wheel Hex Set. CNC-machined and anodized for performance and style, these aluminum hexes offer a secure clamping design and are a great tuning option for adjusting track width and wheel fit. 🔧 Features: 🛠️ CNC-Machined Aluminum Construction – Lightweight, strong, and anodized for durability 🔒 Clamping Design – Secure fit with cap head screws prevents slipping during hard runs 🔁 Tuning Flexibility – Adjusts rear offset when used with compatible models 📦 Includes: (2) 7.0mm Clamping Hexes (2) Cross Pins (2) Cap Head Screws ⚙️ Compatibility Notes: ✅ Direct Fit For: RC10 B5M Factory Lite ✅ Optional Use On: T5M (stock offset), B5/B5M (adds offset) ⚠️ Requires: Team Associated HD Rear CVA Axle (ASC71019) 💡 Ideal for racers looking to fine-tune rear track width or reinforce wheel mounting with a reliable aluminum upgrade.

Read more less

Team Associated 7.8x1.0mm Aluminum Bulkhead Ball Stud Washers – Blue (10) – Part 31385Wider Support. Precision Shimming. Race-Ready Tuning. The Team Associated 7.8x1.0mm Blue Aluminum Ball Stud Washers (31385) are ideal for bulkhead and arm mount shimming in both on-road and off-road 1/10 scale vehicles. With a larger outer diameter, these washers provide more surface area, perfect for critical suspension points where strength and consistency matter. ✅ Pack of 10 precision washers✅ 7.8mm outer diameter / 1.0mm thickness✅ Anodized blue aluminum – lightweight and durable✅ Ideal for bulkhead, arm mount, and ball stud adjustments✅ Common in off-road and on-road setups alike✅ Perfect fit for 1/10 scale race platforms 📦 Includes: (10) 7.8x1.0mm Blue Aluminum Ball Stud Washers Part #: 31385 💡 Pro Tip: Use these in areas where added washer surface area can prevent flex or part deformation over time.

Read more less

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washers – Blue (10) – Part 31387Fine-Tune Wheelbase. Maximize Setup Precision. The Team Associated 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers (31387) are perfect for adjusting wheelbase and tuning suspension geometry on vehicles with 3.5mm hinge pins. Commonly used on the RC8B3 and RC8T3 series, these lightweight spacers are also compatible with other platforms that accept 3.5mm hinge pins. ✅ Pack of 10 high-precision spacers✅ Size: 7.8mm OD x 3.5mm ID x 0.5mm thick✅ Blue anodized aluminum – lightweight and corrosion-resistant✅ Used for fine-tuning wheelbase and hub spacing✅ Compatible with RC8B3, RC8T3, and any vehicle using 3.5mm hinge pins✅ Also available in 1.0mm and 2.0mm thicknesses (sold separately) 📦 Includes: (10) 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers Part #: 31387 💡 Pro Tip: Stack different thicknesses to get the exact rear end length or toe-in setup you're after.

Read more less

Team Associated 7.8x3.5x1.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31388Dial In Wheelbase. Precision You Can Stack. The Team Associated 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers (31388) are a smart tuning tool for adjusting wheelbase and hub spacing on RC8B3, RC8T3, and any 1/8 vehicle using 3.5mm hinge pins. These durable, lightweight aluminum spacers help you fine-tune geometry for track conditions or personal preference. ✅ Size: 7.8mm OD x 3.5mm ID x 1.0mm thick✅ CNC-machined blue anodized aluminum – race-grade durability✅ Used for hub spacing and wheelbase tuning✅ Fits RC8B3, RC8T3, and any vehicle with 3.5mm hinge pins✅ Perfect for stacking with .5mm or 2.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x1.0mm Blue Aluminum Hub Spacer Washers Part #: 31388 💡 Pro Tip: Fine-tuning wheelbase can impact rear grip, stability, and overall cornering behavior—stack accordingly for your surface.  

Read more less

Team Associated 7.8x3.5x2.0mm Aluminum Hub Spacer Washers – Blue (10) – Part 31389Maximum Spacing. Race-Ready Adjustability. The Team Associated 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers (31389) are ideal for making larger wheelbase and hub spacing adjustments on RC8B3 and RC8T3 series vehicles—or any platform that uses 3.5mm hinge pins. Durable and lightweight, these aluminum washers are a reliable tuning option for racers who want full control over rear-end geometry. ✅ Size: 7.8mm OD x 3.5mm ID x 2.0mm thick✅ Anodized blue 7075 aluminum – high strength, low weight✅ Designed for wheelbase and hub spacing adjustments✅ Compatible with 3.5mm hinge pin platforms✅ Pairs perfectly with 0.5mm and 1.0mm spacers (sold separately) 📦 Includes: (10) 7.8x3.5x2.0mm Blue Aluminum Hub Spacer Washers Part #: 31389 💡 Pro Tip: Use thicker spacers like this to extend wheelbase for more high-speed stability or track-specific tuning.

Read more less

Team Associated Aluminum LRC "D" Arm Mount – RC10B74.1 Optimize rear suspension geometry with precision. The ASC92261 Aluminum LRC "D" Arm Mount is a factory replacement part designed for the RC10B74.1 and B74.1D 1/10 scale 4WD electric buggies. Built from durable aluminum, this mount delivers enhanced strength and consistent performance under race conditions. ⚙️ Features: 🧱 CNC-machined aluminum for increased durability 📐 LRC (Low Roll Center) geometry helps fine-tune rear suspension behavior 🔧 Direct fit replacement for kit-supplied “D” arm mount 📦 Includes: (1) Aluminum LRC "D" Arm Mount ✅ Compatibility: Team Associated RC10B74.1 Team Associated RC10B74.1D Maintain your edge on the track with genuine Team Associated tuning components.

Read more less

Team Associated Arm Mount Inserts – ASC92014🔧 Fine-Tune Your Geometry with Precision Inserts Dial in your suspension setup with these official Team Associated Arm Mount Inserts. Designed as direct replacements for the RC10 B6 and B6D platforms, this set gives you a range of tuning options to adjust toe and anti-squat settings—so you can hit your marks on any track. ✅ Factory fit for B6 & B6D vehicles✅ Adjust toe and squat for maximum cornering control✅ Durable and lightweight composite construction 📦 Includes:• (4) Inserts – 0, 0• (4) Inserts – 0, 0.35• (4) Inserts – 0, 0.7• (4) Inserts – 0.35, 0.35 🔢 Part Number: ASC92014🏁 Brand: Team Associated

Read more less

  Keep your suspension tight and responsive with the Team Associated B6 Ballcups. These molded plastic ballcups are designed for smooth operation and long-lasting performance, making them a must-have maintenance item or upgrade for your buggy. Features: Durable molded composite construction Provides a secure and smooth fit on ball studs Helps maintain precise suspension and steering geometry Replacement or spare set for your pit bag Includes:(12) Ballcups Compatibility: RC10B6 RC10B6D RC10B6.1 / B6.1D RC10B6.2 / B6.2D RC10B6.3 / B6.3D RC10B6.4 / B6.4D  

Read more less

Team Associated B6 Bumper Set (91685)Keep your RC10 B6 or B6D protected with this genuine Team Associated replacement bumper set. Whether you're replacing worn parts or upgrading your buggy's durability, this set has you covered with both front and rear bumpers included. Includes: (1) Front Bumper (1) Rear Bumper Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D

Read more less

Team Associated B6 Hinge Pin Set [91670]🔩 Keep It Tight, Keep It Right!Replace worn or bent hinge pins with the Team Associated B6 Hinge Pin Set, designed specifically for the RC10 B6 and B6D buggies. This complete set ensures your suspension arms stay securely in place, delivering the smooth and precise movement needed for peak performance on the track. 🔧 Features:✅ Includes front & rear, inner & outer hinge pins✅ Direct replacement for factory parts✅ Built to Team Associated’s precision standards✅ Perfect for maintenance or full rebuilds 📦 Includes:(1) Complete Hinge Pin Set 🔥 Part Number: 91670

Read more less

Team Associated B6 Laydown Idler Gear (39T) (91716)Keep your laydown transmission running smooth with these genuine Team Associated 39T idler gears. Designed for the RC10 B6, B6.1, and B6.2 series buggies with a laydown setup, these are the direct replacements you need for peak drivetrain performance. Includes: (2) 39T Idler Gears Compatibility: RC10 B6 RC10 B6.1 RC10 B6.2 (with laydown transmission)

Read more less

Direct-fit replacement for a range of B6-series buggies — essential for clean body and wing attachment. Upgrade or replace your worn mount with this OEM composite Wing/Body Mount for the RC10 B6 chassis line. The kit includes everything needed to properly secure both wing and body to your buggy. Includes: (1) Left Wing Brace (1) Right Wing Brace (1) Shim Plate (2) Wing Mount Buttons Key Features: Precision-molded composite for durability and reliable attachment Factory-style fit for consistent mounting and race-ready stiffness Optionally compatible with Team Associated Factory Team Aluminum Wing Mount (ASC91903) for racer upgrades Compatibility – What Fits Buggy Series Specific Models B6 Series RC10 B6, B6 Club Racer, B6D B6.1 Series B6.1, B6.1 Factory Lite, B6.1D, B6.1DL B6.2 Series B6.2, B6.2D B6.3 Series B6.3, B6.3D B6.4 Series B6.4, B6.4D Extended Chassis RC10 B64, B64 Club Racer, B64D T6 Variants RC10 T6.1, T6.2 SC6 Models SC6.1 Why It’s a Must-Have: Prevents body and wing movement during hard cornering or crashes Convenient replacement when original part wears or cracks Compatible across multiple mod cycles of the B6 platform — simplifies spare inventory!

Read more less

Team Associated B6.1/B6.1D Caster & Steering Block Set (91776)Keep your front end tight and precise with this replacement caster and steering block set from Team Associated. Originally designed for the B6.1 and B6.1D buggies, this set also works great for compatible short course and stadium trucks like the SC6.1 and T6.1. ✅ Direct Replacement – For B6.1/B6.1D buggies✅ Multi-Platform Compatibility – Also fits SC6.1 and T6.1✅ Durable Construction – Built for precision and performance✅ OEM Fit – Ensures smooth steering and proper caster geometry 📦 Includes:– (1) Left Caster Block– (1) Right Caster Block– (1) Left Steering Block– (1) Right Steering Block Perfect for rebuilds, spares, or freshening up your front-end setup before the next race.

Read more less

Upgrade or replace your buggy’s diff with the Team Associated B6.1/B6.1D Gear Differential Kit — engineered for smooth, consistent power delivery and long-lasting performance. Features: Complete kit with all parts needed to build one high-quality gear differential Designed for precision fit and smooth operation in B6.1 and B6.1D models Durable materials built to withstand competitive racing demands Includes: All gears, seals, outdrives, and hardware for one complete gear diff Perfect for racers looking for reliable performance and tunability on any surface. Team Associated RC10B6.3Team Associated RC10B6.3DTeam Associated RC10B6D

Read more less

Team Associated B6.1/B6.1D Gear Differential Outdrives [91785] 🔩 Smooth power transfer starts here! These Team Associated Gear Differential Outdrives are the perfect replacement for your B6.1 or B6.1D buggy. Precision-machined and durable, they’re ready to handle race-day abuse while keeping your diff performing like new. ✅ Direct fit for B6.1 and B6.1D gear differentials✅ Includes outdrives and pins for a complete refresh✅ Built tough for consistent, long-lasting performance Includes:(2) Gear Diff Outdrives(2) Outdrive Pins 📦 Part Number: 91785🏁 Brand: Team Associated

Read more less

Team Associated B6.1/B6.1D Rear Ballstud Mount (91775) Upgrade your suspension adjustability with the Team Associated B6.1/B6.1D Rear Ballstud Mount. This precision-machined part provides a secure mounting point for your rear camber links, allowing for fine-tuned handling and performance. Features: Precision-machined for accurate fit and alignment Provides stable mounting for rear camber link adjustments Durable construction for long-lasting performance Direct replacement for the stock rear ballstud mount Compatibility: Team Associated B6.1 Team Associated B6.1D Includes: (1) Rear Ballstud Mount Perfect for restoring or upgrading your buggy’s rear suspension geometry and tuning options.

Read more less

Fine-tune your chassis stiffness with the Team Associated RC10B6.4/B6.4D Factory Team Carbon Top Plate & Ball Stud Mount. This precision-crafted upgrade offers enhanced rigidity while allowing adjustable flex, giving racers more control over handling characteristics. Features: Carbon fiber construction for lightweight strength Adjustable top plate stiffness for fine-tuning handling Includes ball stud mount for secure, precise linkage connection Factory Team quality for professional-grade performance Compatibility: Team Associated RC10B6.4 Team Associated RC10B6.4D Includes: (1) Carbon Top Plate (1) Ball Stud Mount Perfect for competitive racers looking to dial in their chassis response and steering feel.

Read more less

Team Associated B64 Plastic Gear Differential Gear Set – ASC92076🔧 Smooth Power Transfer, Race-Ready Performance Keep your B64 running smooth with this genuine Team Associated Plastic Gear Differential Set. Whether you're rebuilding or replacing worn-out gears, this set includes everything needed for one full diff—ensuring reliable, consistent drivetrain performance on the track. ✅ Factory replacement for the RC10B64 series✅ Durable plastic gears for lightweight performance✅ Includes all internals needed for one differential rebuild 📦 Includes:• Complete internal gear set for one differential 🔢 Part Number: ASC92076🏁 Brand: Team Associated  

Read more less

Team Associated B74.1 3 Pad Slipper Conversion (Part #92282)Upgrade your ride with the Team Associated 3 Pad Slipper Conversion – perfect for drivers seeking smoother, more forgiving throttle control. This conversion replaces the stock 2-pad setup with a 3-pad system using a larger 19mm I.D. pad and a softer spring, ideal for dirt and low-traction tracks. ✅ Smoother engagement✅ Better throttle feel✅ Includes instructions for easy install Compatibility: B74.1 B74.1D (requires ASC92275 slipper shaft outdrive set) B74.2 B74.2D B74.2 CE Swap it in and feel the difference where it counts – on the track!  

Read more less

Team Associated Caster Hat Bushings: B6 [91676]🎯 Fine-Tune Your Front End!Dial in your perfect front-end geometry with the Team Associated B6 Caster Hat Bushings. Designed for the RC10 B6 and B6D, this set lets you adjust caster angle precisely, helping you gain the perfect balance of steering and stability for any track condition. 🔧 Features:✅ Direct replacement for stock bushings✅ Includes 0mm, 1mm, 2mm, and 3mm for custom tuning✅ Two of each size for left and right sides✅ Made for the RC10 B6 and B6D platforms 📦 Includes:(2) 0mm Bushings(2) 1mm Bushings(2) 2mm Bushings(2) 3mm Bushings 🔥 Part Number: 91676

Read more less

Team Associated CVA Bone, 66mm: RC10B74 – ASC92212🔩 Smooth Power. Built to Last. Keep your drivetrain locked in and reliable with the Team Associated 66mm CVA Bones for the RC10B74! These factory replacements are built to handle serious racing loads while delivering ultra-smooth power transfer through your suspension. A must-have part for anyone looking to keep their 4WD buggy running at peak performance. 🛠️ Features:✅ Genuine Team Associated quality✅ 66mm length – perfect factory fit✅ Built tough for high-performance racing✅ Ideal for spares or replacing worn components 📦 Includes:• (2) CVA Bones (66mm) 💡 Compatibility:✔️ Team Associated RC10B74 🔢 Part Number: ASC92212🏁 Brand: Team Associated

Read more less

  Restore smooth drivetrain performance with the CVA Rebuild Kit from Team Associated. Designed to refresh your constant velocity driveshafts, this kit includes all the necessary components to bring worn CVAs back to peak condition—ensuring efficient power transfer and extended part life. 🔥 Key Features: Complete rebuild set for CVA driveshaft assemblies Helps restore smooth, efficient drivetrain operation Includes cross pins, barrels, and set screws Precision components built to factory specifications Ideal for regular maintenance or post-race refresh ✅ Compatibility: Compatible with a variety of Team Associated CVA-style driveshafts Commonly used in RC10B6, B6.1, B6.2, B6.3, and other AE 1/10 vehicles Check your vehicle’s manual for exact fitment 📦 Includes: (2) Cross Pins (2) Barrels (2) Set Screws ⚠️ Tip:Use thread lock on set screws and inspect parts regularly for wear to prevent drivetrain failure.

Read more less

Team Associated CVA/Wheel Hex Pin (4) [91436]🔩 Lock It Down with Precision!The Team Associated CVA/Wheel Hex Pin Set is your go-to solution for keeping your drivetrain tight and reliable. These precision steel pins are perfect replacements for connecting rear CVA axles and bones, or securing wheel hexes to both front and rear axles. 🛠 Features:✅ Durable steel construction✅ Perfect fit for CVA assemblies and wheel hexes✅ Essential for smooth, consistent performance 📦 Includes:(4) CVA/Wheel Hex Pins 🔥 Part Number: 91436🏁 Compatible with multiple Team Associated platforms

Read more less

Team Associated DC10 1/10 Electric RWD Drift Car Kit – Highly Tunable Competition-Grade Drifting Chassis! Experience precision drifting like never before with the Team Associated DC10—a high-performance, competition-grade 1/10 RWD drift chassis designed for ultimate control, customization, and agility. Engineered by one of the most respected names in RC racing, the DC10 is built to dominate drift tracks with its lightweight carbon-fiber chassis, fully tunable drivetrain, and race-proven suspension system. Key Features: ✅ Factory Team Hard-Anodized Threaded Aluminum Shocks – Provides superior damping and precise handling.✅ 2.5mm Factory Team Carbon-Fiber Chassis – Ensures lightweight durability and optimal weight distribution.✅ Carbon-Fiber Shock Towers & Top Plates – Increases chassis rigidity and fine-tuned response.✅ Fully Tunable, Blue-Anodized Aluminum Ackermann Plates – Allows for precise steering geometry adjustments.✅ Factory Team Blue-Anodized Aluminum Chassis Post – Reinforces chassis strength and durability.✅ High & Low Motor Mounting Options – Customizable power delivery and balance for different driving styles.✅ +6mm Transmission Height Adjustment Insert – Raises roll center for improved control and compatibility with larger spur gears.✅ Maximum Steering Throw – Adjustable servo and battery positioning for optimal drift angle and control.✅ Rear-Mounted Electronic Speed Control (ESC) Plate – Lowers center of gravity for increased rear traction. Precision Engineering for Ultimate Drifting Control 🛠 Optimized Chassis & Suspension: Lightweight carbon-fiber chassis and shock towers ensure a perfect balance of strength, weight, and agility. Two top plate options allow drivers to adjust chassis rigidity for different drift conditions. Adjustable rear anti-squat and toe-in settings improve traction and stability for aggressive drifting. ⚙️ Fully Adjustable Steering & Drivetrain: Customizable high and low motor mounting positions let racers fine-tune their power delivery and handling balance. Blue-anodized aluminum Ackermann plates offer precise steering angle adjustments for superior drift transitions. Rear-mounted ESC plate optimizes weight bias for improved stability and throttle control. 🚀 Designed for High-Level Competition: +6mm transmission height adjustment improves roll center and compatibility with larger gears. Maximum steering throw capability allows for deep angle drifts and aggressive slides. Adjustable servo and battery positioning provides next-level weight distribution customization. In the Box: (1) Team Associated DC10 1/10 RWD Drift Car Kit Needed to Complete: 3+ Channel Transmitter & Receiver System 1/10 Scale ESC & 540-Size Motor Drift Gyro 2S LiPo or 6-Cell NiMH Battery Pack Compatible Battery Charger 1/10 Lexan Drift Car Body Polycarbonate Paint for Body 1/10 Drift Wheels & Tires Specifications: Scale: 1/10 Drive: 2WD RWD Power Source: 2S LiPo Wheelbase: 10.11 in (257mm) Width: 7.09 in (180mm) Assembly Level: Kit 🚨 Note: This is an unassembled RC kit requiring assembly, electronics, and other racer-provided components. Photos of the assembled kit are for illustrative purposes only. Master the Art of Drifting with the Team Associated DC10! 🏆 Built for precision, performance, and complete customization, the Team Associated DC10 sets the standard for competition-ready RC drift cars. Whether you're fine-tuning for deep-angle slides or quick transitions, this Factory Team chassis is engineered for podium-level performance. 🔥 Get your DC10 today and take control of the drift track! 🏁💨

Read more less

Team Associated Factory Team 15.5mm Aluminum 25 Tooth Servo Horn. This is an optional servo horn designed for the RC10 B6 and B6D 1/10 buggies. 25T fits Futaba, ProTek, Savox and most other 25T servos. COMPATIBILITY: Team Associated RC10 B6 Team Associated RC10 B6.1 Team Associated RC10 B6.1 Factory Lite Team Associated RC10 B6.1D Team Associated RC10 B6.2 Team Associated RC10 B6.2D Team Associated RC10 B6D Team Associated RC10 SC6.1

Read more less

Key Features 7075 T6 aluminum Clamping style with large m2.5 screw Length 18.5mm for smoother steering response and less stress on the servo Laser etched spline size Overview Designed for the steering servo in the RC8B3, RC8B3e, RC8T3, and RC8T3e. These new machined aluminum servo horns are stronger than the stock plastic ones that come with most servos and due to the slightly shorter length, they provide a smoother steering feel while decreasing the load on the servo.   ASC1361

Read more less

Team Associated Factory Team Carbon Front Gullwing Arms – RC10B74.2 Increased Response for High-Traction Tracks Upgrade your RC10B74.2 or B74.2D with these Factory Team Carbon Front Gullwing Suspension Arms, designed for racers who demand sharper handling on high-grip or smooth surfaces. The carbon material increases stiffness, delivering enhanced steering response and cornering precision. 🔩 Features: 🏁 Carbon construction for added rigidity 🎯 Designed for smoother surfaces and high-traction conditions 🔧 Direct replacement for stock gullwing arms 🧩 Includes suspension arm spacers for proper fit 📦 Includes: (1) Left Front Carbon Gullwing Arm (1) Right Front Carbon Gullwing Arm (2) Suspension Arm Spacers ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 🏆 Dial in your front-end for faster response and refined control where it matters most.

Read more less

Overview:Keep your shocks and O-rings performing their best with Team Associated Factory Team Green Slime. This silicone-based grease conditions and protects shock O-rings, preventing swelling and tearing while reducing friction. The result is smoother shock action, longer O-ring life, and more consistent suspension performance. Features: Specially formulated silicone grease for shock O-rings and seals Prevents O-ring swelling, tearing, and leaking Reduces friction for smoother, more consistent shock performance Extends the life of seals and improves durability Easy-to-apply formula in a convenient container Trusted Factory Team product for racers and hobbyists alike Compatibility: Works with all RC shock absorbers using silicone O-rings Suitable for Team Associated vehicles and other brands Includes: (1) Container of Factory Team Green Slime Part Number: 1105 ⚡ Pro Tip: Apply a small amount of Green Slime to O-rings and seals whenever rebuilding your shocks—it’ll save you from leaks and keep your suspension feeling silky smooth longer.

Read more less

Team Associated Factory Team Low Friction X-Rings (8) [91493]🧪 Smoother Shocks. Better Performance.Upgrade your suspension with Team Associated Factory Team Low Friction X-Rings! Designed to reduce stiction and improve sealing, these high-performance shock seals help deliver ultra-smooth shock action and increased durability. 🔧 Features:✅ Low friction design for enhanced suspension response✅ Superior sealing to keep oil in and grit out✅ Perfect for racers demanding consistency and control✅ Genuine Team Associated Factory Team parts 📦 Includes:(8) Low Friction X-Rings 🔥 Part Number: 91493

Read more less

Team Associated Factory Team Molded Ring & Pinion Gear Set – RC10B74.2 Lightweight. Durable. Race Proven. Upgrade your drivetrain with the ASC92318 Factory Team Molded Ring and Pinion Gear Set, specifically engineered for the RC10B74.2 and B74.2D platforms. Made from a high-strength composite, this optional gear set delivers a significant 13.5g weight reduction while maintaining durability—even in modified power setups. Perfect for racers running a center differential in 13.5T class and beyond, this setup helps shave weight without sacrificing performance. 🔩 Features: ⚙️ Molded high-strength composite construction 🏁 Optimized for 13.5T class with center diff — holds up to mod setups 💨 Up to 13.5g weight savings for improved efficiency 🔧 Easy drop-in fit for B74.2 series vehicles 🧴 Gasket included – Grease sold separately 📦 Includes: (1) Molded Ring Gear (1) Molded Pinion Gear (1) Gasket ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 💡 Tip: Use Associated Silicone Grease (ASC6636 – sold separately) for optimal gear protection and smooth operation.

Read more less

Team Associated Factory Team RC10B7 FT Lightweight Rear Wing (7", Clear) – Gain the Competitive Edge! 🪶 Reduce weight and improve performance with the Team Associated Factory Team Lightweight Rear Wing for the RC10B7!This 7-inch clear wing matches the original style included in the RC10B7 kit but is crafted to be lighter, helping lower your buggy’s center of gravity and sharpen its handling for maximum track performance. ✨ Key Features: 🪶 Lightweight Design – Sheds critical weight from the top of your chassis for enhanced stability and faster cornering 🏁 7-Inch Wing Style – Matches the stock wing design included in the RC10B7 kit 💨 Optimized for Racing – Offers improved handling without sacrificing durability 🛡️ Official Factory Team Upgrade – Designed and tested by Team Associated for elite performance 📦 Includes: ✔ (1) RC10B7 Factory Team Lightweight Rear Wing (Clear, 7") 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Wing arrives clear and requires trimming and painting if desired.🔹 Use wing mounting hardware included with your RC10B7 kit or optional wing hardware. 🏁 Fine-tune your buggy's handling and stay ahead of the pack with the Factory Team Lightweight Rear Wing! 🔥 Upgrade today and experience the precision of Team Associated Factory Team performance! 🔥

Read more less

Team Associated Factory Team RC10B7 FT Steering Block Mount Set – Precision Handling Upgrade! 🔧 Enhance your RC10B7 or RC10B7D’s steering performance with the Team Associated Factory Team RC10B7 FT Steering Block Mount Set!Crafted from high-quality aluminum, these mounts are designed for use with the Factory Team Adjustable KPI Set (ASC92479), delivering superior durability and sharper steering response for competitive racing. ✨ Key Features: 🔩 CNC-Machined Aluminum Construction – Provides exceptional strength and durability 🏁 Designed for Adjustable KPI Tuning – Works perfectly with the Factory Team Adjustable KPI Set (ASC92479) 🔧 Precision Fit for Factory Team Performance – Improves steering accuracy and responsiveness 🛡️ Official Team Associated Factory Team Upgrade – Race-proven quality and reliability 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Compatible only with vehicles equipped with the Factory Team Adjustable KPI Set (ASC92479).🔹 Includes two aluminum steering block mounts. 🏁 Maximize your steering precision with the Factory Team RC10B7 FT Steering Block Mount Set! 🔥 Upgrade today and experience superior handling and durability from Team Associated! 🔥

Read more less

Team Associated Factory Team Rear Gearbox Pinion Height Inserts – RC10B74.2 Precision Tuning for Peak Gear Mesh Upgrade your drivetrain precision with the Factory Team Machined Rear Gearbox Pinion Height Inserts for the RC10B74.2 and B74.2D. These CNC-machined aluminum inserts allow fine-tuning of your pinion height, ensuring ideal mesh alignment when adjusting differential height settings. 🔩 Features: 🧰 Precision-machined aluminum construction 🎯 Adjustable pinion height ensures proper gear mesh 🔁 Ideal for setups that involve diff height tuning 🔧 Quick and easy installation 📦 Includes: (1) 0–3mm Pinion Height Insert (1) 1–2mm Pinion Height Insert ✅ Compatibility: Team Associated RC10B74.2 Team Associated RC10B74.2D 🛠️ Factory-level adjustment for competitive edge.

Read more less

Dial in your suspension with Team Associated’s Factory Team 13mm shock pistons. The #91933 set features 2x1.7mm holes with a 2.5mm thick profile, providing a great tuning option for refining pack and rebound on modern high-performance off-road tracks. 📦 Includes: (2) FT 13mm Shock Pistons – 2x1.7mm hole layout 2.5mm thick ⚙️ Key Features: CNC-machined for ultra-precise damping consistency Designed for 13mm shock bodies used on AE’s latest platforms Ideal for high-traction surfaces needing tighter shock control Compatible with RC10B6.4, RC10B74.2, and similar vehicles 📌 Tuning Tip: Use 2x1.7mm pistons to increase damping over 2x1.8mm, providing more pack and control in bumpy or high-speed corners.

Read more less

Upgrade your 13mm shocks with these Factory Team precision pistons from Team Associated. The #91934 2x1.8mm shock pistons are designed with a 2.5mm thickness for added tuning flexibility and smoother damping response—perfect for racers fine-tuning their suspension on high-traction surfaces.📦 Includes: (2) FT 13mm Shock Pistons – 2x1.8mm hole layout 2.5mm thick ⚙️ Key Features: CNC-machined precision for consistent performance 13mm piston design fits Team Associated’s latest shocks Ideal for carpet, astro, or high-grip clay tracks Designed for RC10B6.4, RC10B74.2, and other AE vehicles using 13mm shocks 📌 Tuning Tip: Smaller holes (1.8mm) and thicker pistons increase pack and slow down shock speed, which is great for improved control on high-traction tracks or smoother landings. Let me know if you'd like a matching version for other piston sizes or to bundle with 13mm shock sets!

Read more less

Dial in your suspension for ultimate precision with the Factory Team 13mm Shock Pistons. The #91931 pistons feature two 1.5mm holes, offering maximum damping for high-traction surfaces and rough tracks where control is key. 📦 Includes: (2) FT 13mm Shock Pistons – 2x1.5mm hole configuration 2.5mm thickness ⚙️ Key Features: Compatible with 13mm Team Associated shock bodies CNC-precision molding ensures consistency Smaller hole size for slower rebound and increased pack Ideal for high-bite or rough surface tracks Tuning option for front or rear shocks on RC10B6.4, RC10B74.  

Read more less