Upgrade your RC10B74 series buggy with these Factory Team Carbon Fiber Chassis Braces. Designed for increased stiffness and responsiveness, these lightweight carbon braces enhance durability while delivering consistent performance on high-traction surfaces. 📌 Key Features: Lightweight 2.5mm carbon fiber construction Increases chassis stiffness and rigidity Enhances overall handling precision Direct Factory Team upgrade for stock braces 📦 Includes: (1) Front carbon chassis brace (1) Rear carbon chassis brace ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2 RC10B74.2D A must-have hop-up for serious racers seeking that perfect balance of strength and responsiveness.

Read more less

Upgrade your RC10B74.2 with the Factory Team Top Plate Kit, engineered for improved front-end strength and rigidity. This precision CNC-machined kit enhances durability while maintaining a lightweight design — perfect for serious racers looking to increase performance and chassis tuning options. 📌 Key Features: Factory Team precision fit and finish Provides increased stiffness to the front chassis area Reduces flex in high-load conditions Lightweight, durable construction 📦 Includes: (1) Factory Team top plate (1) Top plate brace Required mounting hardware ✅ Compatibility: RC10B74.2 RC10B74.2D Optimize your front-end stability and keep your steering precise with this must-have tuning upgrade from Team Associated!

Read more less

Upgrade your RC10B74.1 with this Factory Team LTC (Low Torque Capacity) Differential Set, designed to reduce rotational mass and improve acceleration and handling. This set includes both the front and rear differentials, offering a complete solution for racers seeking increased efficiency and improved cornering response. 📌 Key Features: Complete front and rear differential set Lightweight LTC design for reduced rotating mass Enhanced on-power steering and corner exit traction Factory Team components ensure a precise fit and long-term durability 📦 Includes: (2) LTC gear differential assemblies (front & rear) Internal gears and seals pre-installed Ready to fill with your preferred silicone diff fluid ✅ Compatibility: RC10B74.1 RC10B74.1D May also be used with RC10B74.2 platforms as a tuning option

Read more less

Boost chassis rigidity and improve handling response with the Factory Team 2.5mm Carbon Fiber Stiff Chassis Brace Support Set for the RC10B74.2. This upgrade provides enhanced stiffness across the center section of the buggy, helping to reduce unwanted flex and improve overall consistency, especially on high-grip tracks. 📌 Key Features: Precision-machined 2.5mm carbon fiber construction Stiffens chassis flex in key areas Lightweight with high-strength performance Ideal for high-traction surfaces or aggressive driving styles 📦 Includes: (1) Carbon fiber front brace support (1) Carbon fiber rear brace support ✅ Compatibility: Team Associated RC10B74.2 and B74.2D Factory Team tuned fit and finish

Read more less

Upgrade your RC10B74.2 with the Factory Team Decoupled Slipper Shaft Outdrive Set. Designed for use with the decoupled slipper system, this precision-engineered outdrive set provides improved drivetrain durability and smooth power delivery, making it essential for high-level competition and maintenance. 📌 Key Features: Factory Team performance-grade components Designed for decoupled slipper configuration Enhances drivetrain strength and efficiency Precision-machined for accurate fit and finish 📦 Includes: (1) Pair of shaft outdrives (left & right) Hardware required for installation ✅ Compatibility: RC10B74.2 Works in conjunction with the Factory Team decoupled slipper system

Read more less

Optimize your drivetrain performance with the Factory Team Decoupled Slipper Hub and Pads for the RC10B74.2. Designed to work with the decoupled slipper system, this upgrade reduces front wheel influence during off-power cornering and braking, providing smoother handling and increased mid-corner stability on high-grip tracks. 📌 Key Features: Factory Team precision upgrade Designed for use with decoupled slipper setups Reduces braking drag and improves off-power steering Helps maintain consistent rear traction High-quality slipper pads included 📦 Includes: (1) Decoupled Slipper Hub (2) Slipper Pads ✅ Compatibility: Team Associated RC10B74.2 May also fit other RC10B74 variants using a decoupled slipper configuration

Read more less

Upgrade your RC10B74.2 with this official Team Associated Servo Mount Set, specifically designed for use with the decoupled slipper configuration. Precision-engineered for perfect fit and performance, this set ensures secure servo mounting and consistent servo alignment during extreme track action. 🔩 Key Features: Designed for RC10B74.2 vehicles Compatible with decoupled slipper setups Factory Team precision fit and finish Includes both left and right servo mounts 📦 Includes: (1) Left Servo Mount (1) Right Servo Mount ✅ Compatibility: Team Associated RC10B74.2 Vehicles using the decoupled slipper layout

Read more less

Overview:Upgrade your buggy with the Team Associated RC10B84 Factory Team Carbon Side Rails. Made from high-quality carbon fiber, these side rails reduce weight and add rigidity compared to the standard composite rails. The result is a stiffer chassis with improved response, perfect for racers looking to maximize performance on high-traction tracks. Features: Carbon fiber construction for lightweight strength Adds rigidity to the chassis for sharper handling Reduces overall vehicle weight Direct replacement for stock composite side rails Genuine Factory Team performance upgrade Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Set of Factory Team Carbon Side Rails Part Number: 92502 ⚡ Pro Tip: Pair these with the Factory Team Carbon Chassis Braces (92504) for a fully optimized lightweight and rigid chassis setup.

Read more less

Overview:Reinforce your buggy’s backbone with the Team Associated RC10B84 Chassis Braces. Designed to stiffen the chassis and improve durability, these braces help maintain consistent handling by reducing flex under high loads. Whether you’re replacing worn parts or fine-tuning chassis stiffness, this set ensures your B84 stays reliable and race-ready. Features: Complete chassis brace set for the B84 Provides added rigidity and durability Helps maintain consistent handling and driveline alignment Molded composite construction for strength with balanced flex Genuine Team Associated replacement part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Chassis Brace Set (front and rear braces with hardware) Part Number: 92503 ⚡ Pro Tip: Upgrade to the Factory Team Carbon Chassis Braces (92504) for reduced weight and even greater stiffness if you’re racing on high-traction tracks.

Read more less

Overview:Keep your electronics secure and cool with the Team Associated RC10B84 Battery Holder & Fan Mount Set. Designed for the RC10B84, this set provides a lightweight, durable solution to lock your battery firmly in place while also offering a dedicated mount for a cooling fan. Perfect for racers pushing their buggy to the limit, it ensures both stability and reliable cooling during long runs or high-traction racing. Features: Secure, lightweight battery holder designed for the B84 chassis Integrated fan mount to keep electronics running cool Durable construction with precision fit Direct replacement or upgrade for easy installation Genuine Team Associated factory part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Battery Holder (1) Fan Mount Required mounting hardware Part Number: 92505 ⚡ Pro Tip: Pair this set with a 30mm or 40mm high-RPM fan for maximum cooling efficiency during long mains or hot outdoor racing conditions.

Read more less

Overview:Boost performance and durability with the Team Associated RC10B84 Factory Team Carbon Front Suspension Arms. Constructed from carbon composite material, these arms provide increased stiffness and reduced flex compared to standard arms—delivering sharper steering response, improved cornering consistency, and the durability needed for high-level racing. Features: Carbon composite construction for added stiffness and strength Reduces flex for more consistent suspension geometry Improves steering precision and cornering stability Lightweight design helps lower overall vehicle weight Genuine Factory Team upgrade part Compatibility: Team Associated RC10B84 1/10 4WD Buggy (Front suspension) Includes: (1) Set of Carbon Front Suspension Arms Part Number: 92515 ⚡ Pro Tip: Pair these with the Factory Team carbon rear arms (92516) for a fully upgraded suspension setup that maximizes handling precision on high-traction tracks.  

Read more less

Overview:Fine-tune your buggy’s steering geometry with the Team Associated RC10B84 Caster Inserts. These precision-molded inserts allow racers to adjust caster angle quickly and easily, giving you the flexibility to dial in steering response and stability for any track condition. A must-have tuning option for serious B84 racers. Features: Precision-molded caster adjustment inserts Allows quick and accurate caster angle changes Improves steering response and stability based on track surface Lightweight and durable construction Genuine Team Associated tuning part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Set of Caster Inserts (various angles) Part Number: 92522 ⚡ Pro Tip: Use less caster (lower angle) for quicker steering response on high-traction tracks, and more caster (higher angle) for improved straight-line stability on rough or low-traction surfaces.

Read more less

Overview:The Team Associated RC10B84 Arm Mount D is a precision-machined suspension mount designed for the rear end of the B84. Built to deliver strength and accuracy, this mount ensures the suspension arms stay properly aligned under extreme racing conditions. Whether you’re replacing a worn part or fine-tuning your setup, the Arm Mount D provides a reliable foundation for consistent handling and durability. Features: CNC-machined for precise hinge pin alignment Adds strength and rigidity to the rear suspension assembly Durable construction for long-lasting performance Genuine Team Associated factory replacement/upgrade part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Arm Mount D Part Number: 92540 ⚡ Pro Tip: Pair the Arm Mount D with the Arm Mount Backing Plate (92541) for maximum suspension durability and consistent geometry under heavy loads.

Read more less

Overview:The Team Associated RC10B84 Arm Mount Backing Plate is a precision-machined component designed to reinforce the suspension arm mounts on your buggy. By adding strength and stability to the rear suspension assembly, this backing plate helps maintain precise alignment under high loads, ensuring consistent handling and durability during hard racing conditions. Features: Strengthens and supports the suspension arm mount assembly Maintains proper alignment under heavy loads and impacts Machined for a perfect fit with the RC10B84 chassis Genuine Team Associated Factory Team part for race-proven reliability Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Arm Mount Backing Plate Part Number: 92541 ⚡ Pro Tip: Use this backing plate with the B84 aluminum arm mounts for maximum suspension rigidity and improved cornering consistency.

Read more less

🛞 Smooth, Precise Steering ControlThe Team Associated RC10B84 Steering Bellcranks are a direct replacement set designed to restore or upgrade your buggy’s steering system. Built from durable composite material, these bellcranks provide consistent, slop-free steering response to keep your B84 handling sharp on the track. 🔧 Features: ✅ Genuine Team Associated replacement part for the RC10B84 ✅ High-strength molded construction for long-lasting durability ✅ Maintains precise steering geometry and smooth movement ✅ Easy installation — direct fit to stock components 📦 Includes: (1) Set of RC10B84 Steering Bellcranks      

Read more less

Team Associated RC10B84 Rear Gearbox – ASC92511 ⚙️ Durable Rear Drivetrain HousingThe Team Associated RC10B84 Rear Gearbox is a genuine replacement part designed to restore strength and precision to your buggy’s drivetrain. Molded from high-quality composite material, this housing keeps your differential, gears, and driveshafts properly aligned under the toughest racing conditions. 🔧 Features: ✅ Direct fit replacement for RC10B84 ✅ High-strength molded composite construction ✅ Maintains gear alignment and drivetrain efficiency ✅ Essential for restoring performance after wear or crash damage 📦 Includes: (1) Rear Gearbox Housing  

Read more less

⚡ Secure Power TransferThe Team Associated RC10B84 Motor Mount is a precision-engineered replacement part designed to keep your motor solidly in place while maintaining exact gear mesh and drivetrain alignment. Built for the rigors of high-performance racing, this mount ensures your buggy runs smooth, efficient, and consistent on the track. ⚙️ Features: ✅ Direct fit for the RC10B84 ✅ CNC-machined aluminum for strength and durability ✅ Provides accurate motor positioning and gear mesh ✅ Race-proven Factory Team quality and finish 📦 Includes: (1) RC10B84 Motor Mount    

Read more less

🏁 Factory Replacement PartThe RC10B84 Center Bulkhead (Diff) is a direct replacement designed specifically for the differential configuration of your B84 buggy. It provides a rigid and precise mounting point for the center diff, keeping your drivetrain secure and efficient during the toughest race conditions. ⚙️ Features: ✅ Fits RC10B84 with center differential configuration ✅ Ensures proper alignment and smooth drivetrain operation ✅ High-strength materials for durability and consistent performance ✅ Genuine Team Associated quality and fit 📦 Includes: (1) RC10B84 Center Bulkhead (Diff) 💡 Pro Tip: Pair with the ASC92529 Center Bulkhead Brace (Diff) for added stability and long-term reliability.  

Read more less

🏁 Precision Factory FitThe RC10B84 Center Bulkhead (DSC) is a genuine replacement part designed for the Direct Spool Configuration. It provides the secure mounting point for the center drivetrain components, ensuring reliable alignment and smooth power transfer through demanding race conditions. ⚙️ Features: ✅ Direct replacement for the RC10B84 (DSC configuration) ✅ Maintains precise drivetrain geometry and alignment ✅ Built from high-quality, durable materials ✅ Designed for competitive performance and long-lasting strength 📦 Includes: (1) RC10B84 Center Bulkhead (DSC) 💡 Pro Tip: Use alongside the ASC92530 Center Bulkhead Brace (DSC) for maximum rigidity and drivetrain stability.        

Read more less

🔧 Secure Your DrivetrainThe RC10B84 Center Bulkhead Brace (Diff) is a precision replacement part engineered to stabilize the center differential assembly. By reinforcing the bulkhead area, it helps maintain drivetrain alignment, reduces flex, and ensures consistent power delivery under high-stress racing conditions. ⚙️ Features: ✅ Direct replacement part for the RC10B84 ✅ Designed specifically for center differential configuration ✅ Provides additional strength to prevent chassis flex ✅ Durable and race-tested Factory Team quality 📦 Includes: (1) RC10B84 Center Bulkhead Brace (Diff) 💡 Pro Tip: Pair this with the FT Bearing Set (ASC92544) to keep your drivetrain smooth and efficient through long mains.        

Read more less

🛡️ Strength Where It CountsThe RC10B84 Center Bulkhead Brace (DSC) is a precision Factory Team component designed to reinforce the drivetrain area, helping your buggy stay rigid and balanced under racing loads. With the Decoupled Slipper Clutch (DSC) system, this brace maintains alignment and reduces chassis flex for more consistent performance. ⚙️ Features: ✅ Factory Team upgrade – engineered for race-level durability ✅ Designed specifically for the DSC drivetrain configuration ✅ Reinforces center bulkhead to maintain driveline stability ✅ CNC-machined aluminum with anodized finish for strength & style 📦 Includes: (1) RC10B84 Center Bulkhead Brace (DSC) 💡 Pro Tip: Run this with the FT Molded Ring & Pinion Set (ASC92543) to maximize drivetrain smoothness and strength in your B84.      

Read more less

🛠️ Lock Your Steering Power in PlaceThe RC10B84 Servo Mount is a direct replacement part that keeps your steering servo securely anchored, ensuring precise steering response every lap. Designed to fit perfectly on the B84 platform, this mount delivers reliability and consistent alignment under the toughest racing conditions. ⚙️ Features: ✅ Factory replacement for the RC10B84 ✅ Rigid mounting for consistent servo performance ✅ Lightweight design maintains balance without compromise ✅ Direct bolt-on fit with no modifications needed 📦 Includes: (1) RC10B84 Servo Mount 💡 Pro Tip: Pair this with a high-torque servo and the Steering Bellcrank Post Set (ASC92532) to maximize steering precision and durability in your B84.      

Read more less

🔩 Secure & Smooth Steering SupportThe RC10B84 Steering Bellcrank Post Set provides the solid mounting foundation your bellcrank assembly needs for precise and consistent steering. Built to factory specifications, these posts deliver strength and stability, keeping your buggy’s steering geometry dialed in under all track conditions. ⚙️ Features: ✅ Factory replacement for the RC10B84 ✅ Precision-machined posts for secure bellcrank mounting ✅ Maintains smooth steering response and durability ✅ Direct fit—no modifications required 📦 Includes: (1) RC10B84 Steering Bellcrank Post Set 💡 Pro Tip: When rebuilding your steering system, replace the bellcrank posts along with the steering rack (ASC92533) for maximum precision and to eliminate unwanted play.    

Read more less

🛠️ Restore Precision SteeringThe RC10B84 Steering Rack is a factory replacement component designed to keep your buggy’s steering system tight, consistent, and race-ready. Whether you’re rebuilding after wear or looking to maintain peak performance, this part ensures smooth, accurate steering response. ⚙️ Features: ✅ Direct factory replacement for the RC10B84 ✅ Maintains precise steering geometry and alignment ✅ Durable construction for long-lasting reliability ✅ Essential for smooth and predictable cornering performance 📦 Includes: (1) RC10B84 Steering Rack 💡 Pro Tip: Pair this steering rack with fresh bushings (ASC92534) to eliminate play and maximize steering accuracy during high-stress racing conditions.  

Read more less

🔧 Keep Your Steering Smooth & PreciseThe RC10B84 Steering Rack Hat Bushing Set is a direct replacement part designed to maintain the accuracy and smooth operation of your buggy’s steering system. Built to factory specs, these bushings ensure your steering rack operates freely with minimal slop—essential for consistent cornering and control. ⚙️ Features: ✅ Factory replacement set for the RC10B84 steering rack ✅ Helps maintain precise steering alignment ✅ Durable molded construction for long-lasting performance ✅ Easy drop-in installation 📦 Includes: (1) Steering Rack Hat Bushing Set 💡 Pro Tip: If your steering feels loose or inconsistent, replacing worn bushings can instantly improve handling and responsiveness—one of the simplest upgrades for sharper control.

Read more less

🏁 Restore or Upgrade Your Steering PrecisionThe RC10B84 Caster Block Set is a direct replacement designed to keep your buggy’s front-end geometry tight and consistent. Whether you’re replacing worn parts or refreshing your ride for peak performance, these caster blocks ensure smooth, predictable steering and durability under racing conditions. ⚙️ Features: ✅ Factory-spec replacement for the RC10B84 platform ✅ Maintains precise caster angle and suspension geometry ✅ High-strength molded composite construction ✅ Designed for durability and consistent steering response 📦 Includes: (1) Left Caster Block (1) Right Caster Block 💡 Pro Tip: Always inspect hinge pins and kingpins when replacing caster blocks—worn hardware can affect steering accuracy just as much as the blocks themselves.  

Read more less

🏁 Durability Meets PrecisionUpgrade your RC10B84 with the “B” Arm Mount, crafted from CNC-machined aluminum for superior strength and accuracy. This high-performance replacement ensures consistent suspension geometry under stress, giving you sharper handling and rock-solid reliability on the track. ⚙️ Features: ✅ CNC-machined aluminum construction for maximum strength ✅ Precision hinge-pin alignment maintains suspension geometry ✅ Anodized finish adds durability and a pro-level look ✅ Direct fit replacement for the stock plastic “B” mount 📦 Includes: (1) RC10B84 “B” Arm Mount 💡 Pro Tip: Pair the “B” and “C” aluminum mounts for a balanced upgrade that improves both durability and consistency across your rear suspension.  

Read more less

🏎️ Factory Team Suspension UpgradeStep up your B84’s rear suspension with the Factory Team blue aluminum “C” arm mount. This precision-machined part replaces the stock plastic mount to deliver greater rigidity, tighter tolerances, and a clean anodized finish that looks as good as it performs. ⚙️ Features: ✅ Lightweight blue anodized aluminum for strength and corrosion resistance ✅ Improves suspension rigidity for consistent geometry under load ✅ Factory Team upgrade for race-grade durability and handling ✅ Direct replacement for the RC10B84 stock "C" mount 📦 Includes: (1) RC10B84 "C" Arm Mount (Blue Aluminum) 💡 Pro Tip: For best results, pair this upgrade with the correct suspension inserts from Associated to fine-tune your setup for track conditions.    

Read more less

🏆 Factory Team Precision, Race-ReadyThe Team Associated RC10B84 Factory Team Bearing Set delivers premium performance with low-friction, high-durability bearings designed to keep your B84 running smooth and efficient. Built to withstand the demands of top-level racing, these bearings reduce drag, improve drivetrain efficiency, and extend longevity. ⚙️ Features: Genuine Factory Team high-performance bearings Sealed design for reduced maintenance and longer life Enhances drivetrain smoothness and efficiency Direct fit for the RC10B84 platform 📦 Includes: Complete Factory Team Bearing Set for RC10B84 💡 Pro Tip: Keep an extra bearing set in your pit bag—swapping in fresh bearings before big events can be the difference between a podium finish and a DNF.  

Read more less

🔧 Restore Rear-End Structure – The RC10B84 Rear Shock Tower is a direct replacement part designed to bring your buggy back to factory specifications. It ensures consistent suspension geometry and handling after wear, damage, or heavy use. ⚙️ Features:✅ Direct replacement for the stock RC10B84 rear shock tower✅ Maintains suspension geometry and stable handling✅ Durable composite construction for long-lasting performance✅ Designed for easy fit and reliability 📦 Includes: (1) RC10B84 Rear Shock Tower 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Consider keeping an extra shock tower on hand — they’re a common part to break in hard landings, and a quick swap can save your race day.  

Read more less

🔧 Precision Steering Control – Keep your B84’s front end dialed with the Factory Team Front Hubs. Designed for durability and tuning flexibility, these hubs ensure consistent steering response and smooth suspension geometry under race conditions. ⚙️ Features:✅ Precision-molded for a perfect fit on the B84 platform✅ Multiple camber link mounting holes for fine-tuned steering feel✅ Durable construction for long-lasting performance✅ Factory Team quality parts for competitive-level racing 📦 Includes: (1) Left Front Hub (1) Right Front Hub 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Use the inner camber link holes for more aggressive steering on tight tracks, and the outer holes for smoother, more stable cornering.

Read more less

🏁 Stronger, Smarter Suspension – Keep your RC10B84 handling sharp with the Factory Team Rear Hubs. Designed for precision and durability, these hubs maintain wheel alignment under load while giving you the tuning options needed to adapt to any track. ⚙️ Features:✅ Precision-molded for a perfect factory fit✅ Multiple camber link mounting options for quick tuning✅ Strong, durable construction built for competitive racing✅ Factory Team grade components for long-lasting reliability 📦 Includes: (1) Left Rear Hub (1) Right Rear Hub 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Experiment with upper camber link positions on the hubs — lower holes increase traction, while higher ones improve stability on high-grip tracks.

Read more less

⚙️ Precision Drivetrain Component – Keep your RC10B84 running smooth with the Factory Team 38.5mm Center CVA Bone. Designed for a perfect fit, this part ensures efficient power transfer and durability under the rigors of racing. ⚙️ Features:✅ 38.5mm length – engineered specifically for the RC10B84✅ Precision-machined for consistent, smooth drivetrain performance✅ Durable construction for long-lasting reliability✅ Factory Team grade for serious racers 📦 Includes: (1) 38.5mm Center CVA Bone 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Keep a spare set of center CVA bones in your pit box — they’re small, lightweight, and can save your main if a drivetrain failure happens mid-race.  

Read more less

⚡ Keep the Power Flowing – Replace or upgrade your drivetrain with the Factory Team 102mm Center CVA Bone for the RC10B84. Precision-machined for smooth rotation and durability, this part ensures consistent power transfer through your buggy’s center driveline. ⚙️ Features:✅ 102mm length – designed specifically for the RC10B84✅ Precision-machined for smooth, efficient drivetrain performance✅ Strong, durable construction for long-lasting use✅ Factory Team quality for competitive racing 📦 Includes: (1) 102mm Center CVA Bone 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Always check for wear at the pins and outdrives—swapping CVA bones before they fail helps protect more expensive drivetrain parts.    

Read more less

⚡ Durability Where It Matters – Take your drivetrain to the next level with the Factory Team LTC Metal Differential Set for the B84. Designed to withstand the demands of top-tier racing, these precision-machined diffs deliver smooth, consistent power transfer and extended life. ⚙️ Features:✅ Complete front & rear metal differentials for maximum durability✅ Longer wear life than composite options✅ Factory Team precision for smoother operation✅ Engineered specifically for the RC10B84 📦 Includes: (1) Front LTC Metal Differential Assembly (1) Rear LTC Metal Differential Assembly 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Pair with Factory Team diff fluids to fine-tune traction and stability based on track grip levels.

Read more less

💪 Lightweight Strength for Precision Tuning – Upgrade your B84 with the Factory Team Titanium Turnbuckle Set. Built from premium titanium, these turnbuckles reduce weight while maintaining strength, giving racers more responsive handling and durability on the track. ⚙️ Features:✅ CNC-machined titanium construction – lighter than steel, stronger than aluminum✅ Factory Team quality for top-level racing✅ Improves suspension adjustability and responsiveness✅ Direct fit for the RC10B84 📦 Includes: Complete Titanium Turnbuckle Set for the RC10B84 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Combine titanium turnbuckles with Factory Team ball cups for ultra-smooth adjustments and consistent geometry in long mains.    

Read more less