Get your buggy rolling smooth again with the FastEddy RC8B3.2e Team Sealed Bearing Kit. Instead of piecing together individual bearings (and paying more than you need), this complete kit includes all the high-quality rubber-sealed steel bearings required for your RC8B3.2e. Built for durability and performance, these bearings reduce friction, protect against dirt and debris, and keep your drivetrain efficient. 🔥 Key Features: Complete bearing set tailored for the RC8B3.2e High-quality rubber-sealed steel bearings Protects against dust, dirt, and moisture Reduces friction for smoother performance Saves money vs. buying bearings individually ✅ Compatibility: Team Associated RC8B3.2e 📦 Includes: (4) 5x8x2.5 (2) 5x10x4 (4) 6x10x3 (4) 6x12x4 (6) 8x16x5 (4) 8x16x5 Flanged (4) 15x21x4 ⚠️ Note:Bearing sizes may vary depending on production run or installed hop-ups. Please double-check your RC8B3.2e before ordering to confirm fit.  

Read more less

Dial in your drivetrain with the Team Associated 48 Pitch, 66 Tooth Precision Spur Gear. Designed for smooth, efficient power transfer, this spur gear is perfect for fine-tuning your touring car or pan car’s torque and top speed. 🔥 Key Features: Precision-molded 48 pitch, 66 tooth spur gear Provides accurate and consistent gear mesh Optional tuning part to balance acceleration vs. top speed Genuine Team Associated factory quality and durability ✅ Compatibility: Team Associated Apex Team Associated RC10 R5 / RC10 R5.1 Team Associated RC12 R5 / RC12 R5.2 Team Associated TC5 Team Associated TC6 (Original) Team Associated TC6.1 Team Associated TC6.2 Team Associated TC7 (Original) Team Associated TC7.1 Team Associated TC7.2 📦 Includes: (1) 48P Spur Gear (66T) ⚠️ Tip:Experiment with different tooth counts to find the perfect balance between acceleration and top speed for your track layout.  

Read more less

Keep your micro racer strong and reliable with the Team Associated RC28R Chassis Plate. Precision-engineered for the RC28R platform, this lightweight yet durable plate is the foundation of your car—supporting the motor, suspension, battery, and more. 🔥 Key Features: Genuine Team Associated replacement part Durable molded design for long-lasting use Lightweight construction for efficient performance Provides a stable mounting base for all key components ✅ Compatibility: Team Associated RC28R 📦 Includes: (1) RC28R Chassis Plate (Black) ⚠️ Tip:When swapping chassis plates, check screws and mounting hardware for wear and replace as needed.

Read more less

Keep your RC10TC8 running smooth and reliable with this genuine Team Associated replacement part. The 38T Differential Case is designed specifically for the RC10TC8 platform, ensuring precision fit and long-lasting performance. Perfect for maintaining your drivetrain and keeping you race-ready. Features: Official Team Associated replacement part Designed for the RC10TC8 platform Durable construction for smooth differential operation Includes: (1) Differential Case (38T)

Read more less

Restore factory handling or upgrade worn parts with the Rear Suspension Arms for Team Associated 1/10 scale buggies. These durable molded arms are built to withstand the demands of competitive racing while maintaining the precise geometry your vehicle needs for consistent lap times. 🔥 Key Features: Genuine Team Associated replacement part Molded composite construction for durability and flex balance Maintains factory suspension geometry for consistent handling Direct replacement for stock rear arms Designed for competitive off-road performance ✅ Compatibility: Touring Car (TC6.2, TC7.1, TC7.2, TC7.4)   📦 Includes: (1) Left Rear Suspension Arm (1) Right Rear Suspension Arm ⚠️ Tip:Check hinge pin holes and arm ends regularly—excessive wear can affect alignment and handling.

Read more less

Fine-tune your steering geometry with the 4° Caster Blocks from Team Associated. These precision-molded components set the front suspension caster angle, helping you balance steering response, stability, and cornering performance to match track conditions. 🔥 Key Features: 4° caster angle for balanced steering and stability Molded composite construction for durability and precision fit Direct replacement part for worn or damaged caster blocks Designed for race-proven suspension geometry Easy installation with factory hardware ✅ Compatibility: Team Associated TC7 OriginalTeam Associated TC7.1Team Associated TC7.2 📦 Includes: (1) Left Caster Block (4°) (1) Right Caster Block (4°) ⚠️ Tip:Changing caster affects corner entry and straight-line stability—less caster = more steering response, more caster = better stability.

Read more less

Maintain precise axle spacing and bearing alignment with these 5.6mm Axle Crush Tubes from Team Associated. Designed to sit between axle bearings, these tubes help reduce side loading, extend bearing life, and keep your drivetrain running smooth under racing conditions. 🔥 Key Features: Precision 5.6mm length for accurate axle spacing Reduces bearing side load and wear Helps maintain drivetrain efficiency and consistency Machined to Team Associated’s factory specifications Lightweight and durable for competitive applications ✅ Compatibility: Fits multiple Team Associated vehicles requiring 5.6mm axle crush tubes Commonly used in RC10B series and other AE 1/10 vehicles Check your manual for exact placement and fitment 📦 Includes: (4) 5.6mm Axle Crush Tubes ⚠️ Tip:Always replace worn crush tubes when servicing axles or bearings to ensure maximum drivetrain life.

Read more less

Secure your wheels with confidence using these Factory Team 17mm Aluminum Capped Wheel Nuts. Designed for strength, style, and security, these lightweight wheel nuts feature a closed-end design to keep dirt and debris out while maintaining a sleek look on your 1/8 scale vehicle. 🔥 Key Features: Capped design keeps dirt and debris out of the axle threads CNC-machined from lightweight, high-strength aluminum 17mm hex size for 1/8 scale buggies and trucks Hard-anodized finish with Factory Team laser etching Serrated back ensures secure, non-slip fit ✅ Compatibility: Fits most 1/8 scale vehicles using 17mm wheel hexes Compatible with Team Associated RC8B3 / RC8T3 series Also suitable for many other brands using standard 17mm nuts 📦 Includes: (4) 17mm Aluminum Capped Wheel Nuts ⚠️ Tip:Use a 17mm wheel nut wrench for proper installation. Do not overtighten.

Read more less

Fine-tune your drivetrain or suspension with precision using these Team Associated 5.1x8.0x0.20mm shims. Whether you're adjusting spacing, reducing play, or dialing in alignment, these thin profile shims provide the subtle tweaks that matter in competitive setups. 📏 Specifications: Inner Diameter: 5.1mm Outer Diameter: 8.0mm Thickness: 0.20mm Material: Steel Quantity: (Check product packaging—typically sold in packs) 🛠️ Common Uses: Differential spacing Suspension tuning Slop removal on pivot points or shafts ✅ Compatibility: RC10B74 series Universal use for other 5mm shaft applications Essential for racers looking for ultra-fine tuning adjustments. Keep these handy in your pit box!

Read more less

Give your RC10B74.1 the perfect balance of flex and rigidity with the Factory Team Flex Chassis Brace Support Set. Crafted from 2.0mm carbon fiber, this brace set is optimized to allow controlled flex in the chassis for enhanced traction and handling on a variety of track conditions. 📌 Key Features: Factory Team carbon fiber construction 2.0mm thickness provides the ideal flex characteristics Designed to tune chassis response for high-traction or bumpy tracks Lightweight and durable for competitive performance 📦 Includes: (1) Front Flex Chassis Brace Support (1) Rear Flex Chassis Brace Support ✅ Compatibility: RC10B74.1 May also be used on other B74 models with compatible geometry For racers looking to fine-tune handling without sacrificing durability, this Factory Team upgrade is a must-have.

Read more less

Upgrade your RC10B74.1 with the Factory Team Carbon Fiber Chassis Brace Support Set. Precision-cut from 2.0mm carbon fiber, this lightweight and rigid brace support enhances chassis stiffness and tuning capabilities—ideal for racers looking to fine-tune flex characteristics for maximum track performance. 📌 Key Features: Precision CNC-machined carbon fiber construction 2.0mm thick for optimized strength-to-weight ratio Reduces chassis flex for more consistent handling Essential for high-traction racing surfaces 📦 Includes: (1) Front chassis brace support (1) Rear chassis brace support ✅ Compatibility: RC10B74.1 May be used on other B74 variants with matching geometry Built for performance-minded racers chasing precision and durability.

Read more less

Upgrade your RC10B74 series buggy with these Factory Team Carbon Fiber Chassis Braces. Designed for increased stiffness and responsiveness, these lightweight carbon braces enhance durability while delivering consistent performance on high-traction surfaces. 📌 Key Features: Lightweight 2.5mm carbon fiber construction Increases chassis stiffness and rigidity Enhances overall handling precision Direct Factory Team upgrade for stock braces 📦 Includes: (1) Front carbon chassis brace (1) Rear carbon chassis brace ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2 RC10B74.2D A must-have hop-up for serious racers seeking that perfect balance of strength and responsiveness.

Read more less

Upgrade your RC10B74.2 with the Factory Team Top Plate Kit, engineered for improved front-end strength and rigidity. This precision CNC-machined kit enhances durability while maintaining a lightweight design — perfect for serious racers looking to increase performance and chassis tuning options. 📌 Key Features: Factory Team precision fit and finish Provides increased stiffness to the front chassis area Reduces flex in high-load conditions Lightweight, durable construction 📦 Includes: (1) Factory Team top plate (1) Top plate brace Required mounting hardware ✅ Compatibility: RC10B74.2 RC10B74.2D Optimize your front-end stability and keep your steering precise with this must-have tuning upgrade from Team Associated!

Read more less

Upgrade your RC10B74.1 with this Factory Team LTC (Low Torque Capacity) Differential Set, designed to reduce rotational mass and improve acceleration and handling. This set includes both the front and rear differentials, offering a complete solution for racers seeking increased efficiency and improved cornering response. 📌 Key Features: Complete front and rear differential set Lightweight LTC design for reduced rotating mass Enhanced on-power steering and corner exit traction Factory Team components ensure a precise fit and long-term durability 📦 Includes: (2) LTC gear differential assemblies (front & rear) Internal gears and seals pre-installed Ready to fill with your preferred silicone diff fluid ✅ Compatibility: RC10B74.1 RC10B74.1D May also be used with RC10B74.2 platforms as a tuning option

Read more less

Boost chassis rigidity and improve handling response with the Factory Team 2.5mm Carbon Fiber Stiff Chassis Brace Support Set for the RC10B74.2. This upgrade provides enhanced stiffness across the center section of the buggy, helping to reduce unwanted flex and improve overall consistency, especially on high-grip tracks. 📌 Key Features: Precision-machined 2.5mm carbon fiber construction Stiffens chassis flex in key areas Lightweight with high-strength performance Ideal for high-traction surfaces or aggressive driving styles 📦 Includes: (1) Carbon fiber front brace support (1) Carbon fiber rear brace support ✅ Compatibility: Team Associated RC10B74.2 and B74.2D Factory Team tuned fit and finish

Read more less

Upgrade your RC10B74.2 with the Factory Team Decoupled Slipper Shaft Outdrive Set. Designed for use with the decoupled slipper system, this precision-engineered outdrive set provides improved drivetrain durability and smooth power delivery, making it essential for high-level competition and maintenance. 📌 Key Features: Factory Team performance-grade components Designed for decoupled slipper configuration Enhances drivetrain strength and efficiency Precision-machined for accurate fit and finish 📦 Includes: (1) Pair of shaft outdrives (left & right) Hardware required for installation ✅ Compatibility: RC10B74.2 Works in conjunction with the Factory Team decoupled slipper system

Read more less

Optimize your drivetrain performance with the Factory Team Decoupled Slipper Hub and Pads for the RC10B74.2. Designed to work with the decoupled slipper system, this upgrade reduces front wheel influence during off-power cornering and braking, providing smoother handling and increased mid-corner stability on high-grip tracks. 📌 Key Features: Factory Team precision upgrade Designed for use with decoupled slipper setups Reduces braking drag and improves off-power steering Helps maintain consistent rear traction High-quality slipper pads included 📦 Includes: (1) Decoupled Slipper Hub (2) Slipper Pads ✅ Compatibility: Team Associated RC10B74.2 May also fit other RC10B74 variants using a decoupled slipper configuration

Read more less

Upgrade your RC10B74.2 with this official Team Associated Servo Mount Set, specifically designed for use with the decoupled slipper configuration. Precision-engineered for perfect fit and performance, this set ensures secure servo mounting and consistent servo alignment during extreme track action. 🔩 Key Features: Designed for RC10B74.2 vehicles Compatible with decoupled slipper setups Factory Team precision fit and finish Includes both left and right servo mounts 📦 Includes: (1) Left Servo Mount (1) Right Servo Mount ✅ Compatibility: Team Associated RC10B74.2 Vehicles using the decoupled slipper layout

Read more less

Overview:Upgrade your buggy with the Team Associated RC10B84 Factory Team Carbon Side Rails. Made from high-quality carbon fiber, these side rails reduce weight and add rigidity compared to the standard composite rails. The result is a stiffer chassis with improved response, perfect for racers looking to maximize performance on high-traction tracks. Features: Carbon fiber construction for lightweight strength Adds rigidity to the chassis for sharper handling Reduces overall vehicle weight Direct replacement for stock composite side rails Genuine Factory Team performance upgrade Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Set of Factory Team Carbon Side Rails Part Number: 92502 ⚡ Pro Tip: Pair these with the Factory Team Carbon Chassis Braces (92504) for a fully optimized lightweight and rigid chassis setup.

Read more less

Overview:Reinforce your buggy’s backbone with the Team Associated RC10B84 Chassis Braces. Designed to stiffen the chassis and improve durability, these braces help maintain consistent handling by reducing flex under high loads. Whether you’re replacing worn parts or fine-tuning chassis stiffness, this set ensures your B84 stays reliable and race-ready. Features: Complete chassis brace set for the B84 Provides added rigidity and durability Helps maintain consistent handling and driveline alignment Molded composite construction for strength with balanced flex Genuine Team Associated replacement part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Chassis Brace Set (front and rear braces with hardware) Part Number: 92503 ⚡ Pro Tip: Upgrade to the Factory Team Carbon Chassis Braces (92504) for reduced weight and even greater stiffness if you’re racing on high-traction tracks.

Read more less

Overview:Boost performance and durability with the Team Associated RC10B84 Factory Team Carbon Front Suspension Arms. Constructed from carbon composite material, these arms provide increased stiffness and reduced flex compared to standard arms—delivering sharper steering response, improved cornering consistency, and the durability needed for high-level racing. Features: Carbon composite construction for added stiffness and strength Reduces flex for more consistent suspension geometry Improves steering precision and cornering stability Lightweight design helps lower overall vehicle weight Genuine Factory Team upgrade part Compatibility: Team Associated RC10B84 1/10 4WD Buggy (Front suspension) Includes: (1) Set of Carbon Front Suspension Arms Part Number: 92515 ⚡ Pro Tip: Pair these with the Factory Team carbon rear arms (92516) for a fully upgraded suspension setup that maximizes handling precision on high-traction tracks.  

Read more less

Overview:Fine-tune your buggy’s steering geometry with the Team Associated RC10B84 Caster Inserts. These precision-molded inserts allow racers to adjust caster angle quickly and easily, giving you the flexibility to dial in steering response and stability for any track condition. A must-have tuning option for serious B84 racers. Features: Precision-molded caster adjustment inserts Allows quick and accurate caster angle changes Improves steering response and stability based on track surface Lightweight and durable construction Genuine Team Associated tuning part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Set of Caster Inserts (various angles) Part Number: 92522 ⚡ Pro Tip: Use less caster (lower angle) for quicker steering response on high-traction tracks, and more caster (higher angle) for improved straight-line stability on rough or low-traction surfaces.

Read more less

Overview:The Team Associated RC10B84 Arm Mount D is a precision-machined suspension mount designed for the rear end of the B84. Built to deliver strength and accuracy, this mount ensures the suspension arms stay properly aligned under extreme racing conditions. Whether you’re replacing a worn part or fine-tuning your setup, the Arm Mount D provides a reliable foundation for consistent handling and durability. Features: CNC-machined for precise hinge pin alignment Adds strength and rigidity to the rear suspension assembly Durable construction for long-lasting performance Genuine Team Associated factory replacement/upgrade part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Arm Mount D Part Number: 92540 ⚡ Pro Tip: Pair the Arm Mount D with the Arm Mount Backing Plate (92541) for maximum suspension durability and consistent geometry under heavy loads.

Read more less

Overview:The Team Associated RC10B84 Arm Mount Backing Plate is a precision-machined component designed to reinforce the suspension arm mounts on your buggy. By adding strength and stability to the rear suspension assembly, this backing plate helps maintain precise alignment under high loads, ensuring consistent handling and durability during hard racing conditions. Features: Strengthens and supports the suspension arm mount assembly Maintains proper alignment under heavy loads and impacts Machined for a perfect fit with the RC10B84 chassis Genuine Team Associated Factory Team part for race-proven reliability Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Arm Mount Backing Plate Part Number: 92541 ⚡ Pro Tip: Use this backing plate with the B84 aluminum arm mounts for maximum suspension rigidity and improved cornering consistency.

Read more less

🛞 Smooth, Precise Steering ControlThe Team Associated RC10B84 Steering Bellcranks are a direct replacement set designed to restore or upgrade your buggy’s steering system. Built from durable composite material, these bellcranks provide consistent, slop-free steering response to keep your B84 handling sharp on the track. 🔧 Features: ✅ Genuine Team Associated replacement part for the RC10B84 ✅ High-strength molded construction for long-lasting durability ✅ Maintains precise steering geometry and smooth movement ✅ Easy installation — direct fit to stock components 📦 Includes: (1) Set of RC10B84 Steering Bellcranks      

Read more less

Team Associated RC10B84 Rear Gearbox – ASC92511 ⚙️ Durable Rear Drivetrain HousingThe Team Associated RC10B84 Rear Gearbox is a genuine replacement part designed to restore strength and precision to your buggy’s drivetrain. Molded from high-quality composite material, this housing keeps your differential, gears, and driveshafts properly aligned under the toughest racing conditions. 🔧 Features: ✅ Direct fit replacement for RC10B84 ✅ High-strength molded composite construction ✅ Maintains gear alignment and drivetrain efficiency ✅ Essential for restoring performance after wear or crash damage 📦 Includes: (1) Rear Gearbox Housing  

Read more less

⚡ Secure Power TransferThe Team Associated RC10B84 Motor Mount is a precision-engineered replacement part designed to keep your motor solidly in place while maintaining exact gear mesh and drivetrain alignment. Built for the rigors of high-performance racing, this mount ensures your buggy runs smooth, efficient, and consistent on the track. ⚙️ Features: ✅ Direct fit for the RC10B84 ✅ CNC-machined aluminum for strength and durability ✅ Provides accurate motor positioning and gear mesh ✅ Race-proven Factory Team quality and finish 📦 Includes: (1) RC10B84 Motor Mount    

Read more less

🏁 Factory Replacement PartThe RC10B84 Center Bulkhead (Diff) is a direct replacement designed specifically for the differential configuration of your B84 buggy. It provides a rigid and precise mounting point for the center diff, keeping your drivetrain secure and efficient during the toughest race conditions. ⚙️ Features: ✅ Fits RC10B84 with center differential configuration ✅ Ensures proper alignment and smooth drivetrain operation ✅ High-strength materials for durability and consistent performance ✅ Genuine Team Associated quality and fit 📦 Includes: (1) RC10B84 Center Bulkhead (Diff) 💡 Pro Tip: Pair with the ASC92529 Center Bulkhead Brace (Diff) for added stability and long-term reliability.  

Read more less

🏁 Precision Factory FitThe RC10B84 Center Bulkhead (DSC) is a genuine replacement part designed for the Direct Spool Configuration. It provides the secure mounting point for the center drivetrain components, ensuring reliable alignment and smooth power transfer through demanding race conditions. ⚙️ Features: ✅ Direct replacement for the RC10B84 (DSC configuration) ✅ Maintains precise drivetrain geometry and alignment ✅ Built from high-quality, durable materials ✅ Designed for competitive performance and long-lasting strength 📦 Includes: (1) RC10B84 Center Bulkhead (DSC) 💡 Pro Tip: Use alongside the ASC92530 Center Bulkhead Brace (DSC) for maximum rigidity and drivetrain stability.        

Read more less

🔧 Secure Your DrivetrainThe RC10B84 Center Bulkhead Brace (Diff) is a precision replacement part engineered to stabilize the center differential assembly. By reinforcing the bulkhead area, it helps maintain drivetrain alignment, reduces flex, and ensures consistent power delivery under high-stress racing conditions. ⚙️ Features: ✅ Direct replacement part for the RC10B84 ✅ Designed specifically for center differential configuration ✅ Provides additional strength to prevent chassis flex ✅ Durable and race-tested Factory Team quality 📦 Includes: (1) RC10B84 Center Bulkhead Brace (Diff) 💡 Pro Tip: Pair this with the FT Bearing Set (ASC92544) to keep your drivetrain smooth and efficient through long mains.        

Read more less

🛡️ Strength Where It CountsThe RC10B84 Center Bulkhead Brace (DSC) is a precision Factory Team component designed to reinforce the drivetrain area, helping your buggy stay rigid and balanced under racing loads. With the Decoupled Slipper Clutch (DSC) system, this brace maintains alignment and reduces chassis flex for more consistent performance. ⚙️ Features: ✅ Factory Team upgrade – engineered for race-level durability ✅ Designed specifically for the DSC drivetrain configuration ✅ Reinforces center bulkhead to maintain driveline stability ✅ CNC-machined aluminum with anodized finish for strength & style 📦 Includes: (1) RC10B84 Center Bulkhead Brace (DSC) 💡 Pro Tip: Run this with the FT Molded Ring & Pinion Set (ASC92543) to maximize drivetrain smoothness and strength in your B84.      

Read more less

🛠️ Lock Your Steering Power in PlaceThe RC10B84 Servo Mount is a direct replacement part that keeps your steering servo securely anchored, ensuring precise steering response every lap. Designed to fit perfectly on the B84 platform, this mount delivers reliability and consistent alignment under the toughest racing conditions. ⚙️ Features: ✅ Factory replacement for the RC10B84 ✅ Rigid mounting for consistent servo performance ✅ Lightweight design maintains balance without compromise ✅ Direct bolt-on fit with no modifications needed 📦 Includes: (1) RC10B84 Servo Mount 💡 Pro Tip: Pair this with a high-torque servo and the Steering Bellcrank Post Set (ASC92532) to maximize steering precision and durability in your B84.      

Read more less

🔩 Secure & Smooth Steering SupportThe RC10B84 Steering Bellcrank Post Set provides the solid mounting foundation your bellcrank assembly needs for precise and consistent steering. Built to factory specifications, these posts deliver strength and stability, keeping your buggy’s steering geometry dialed in under all track conditions. ⚙️ Features: ✅ Factory replacement for the RC10B84 ✅ Precision-machined posts for secure bellcrank mounting ✅ Maintains smooth steering response and durability ✅ Direct fit—no modifications required 📦 Includes: (1) RC10B84 Steering Bellcrank Post Set 💡 Pro Tip: When rebuilding your steering system, replace the bellcrank posts along with the steering rack (ASC92533) for maximum precision and to eliminate unwanted play.    

Read more less

🛠️ Restore Precision SteeringThe RC10B84 Steering Rack is a factory replacement component designed to keep your buggy’s steering system tight, consistent, and race-ready. Whether you’re rebuilding after wear or looking to maintain peak performance, this part ensures smooth, accurate steering response. ⚙️ Features: ✅ Direct factory replacement for the RC10B84 ✅ Maintains precise steering geometry and alignment ✅ Durable construction for long-lasting reliability ✅ Essential for smooth and predictable cornering performance 📦 Includes: (1) RC10B84 Steering Rack 💡 Pro Tip: Pair this steering rack with fresh bushings (ASC92534) to eliminate play and maximize steering accuracy during high-stress racing conditions.  

Read more less

🔧 Keep Your Steering Smooth & PreciseThe RC10B84 Steering Rack Hat Bushing Set is a direct replacement part designed to maintain the accuracy and smooth operation of your buggy’s steering system. Built to factory specs, these bushings ensure your steering rack operates freely with minimal slop—essential for consistent cornering and control. ⚙️ Features: ✅ Factory replacement set for the RC10B84 steering rack ✅ Helps maintain precise steering alignment ✅ Durable molded construction for long-lasting performance ✅ Easy drop-in installation 📦 Includes: (1) Steering Rack Hat Bushing Set 💡 Pro Tip: If your steering feels loose or inconsistent, replacing worn bushings can instantly improve handling and responsiveness—one of the simplest upgrades for sharper control.

Read more less

🏁 Restore or Upgrade Your Steering PrecisionThe RC10B84 Caster Block Set is a direct replacement designed to keep your buggy’s front-end geometry tight and consistent. Whether you’re replacing worn parts or refreshing your ride for peak performance, these caster blocks ensure smooth, predictable steering and durability under racing conditions. ⚙️ Features: ✅ Factory-spec replacement for the RC10B84 platform ✅ Maintains precise caster angle and suspension geometry ✅ High-strength molded composite construction ✅ Designed for durability and consistent steering response 📦 Includes: (1) Left Caster Block (1) Right Caster Block 💡 Pro Tip: Always inspect hinge pins and kingpins when replacing caster blocks—worn hardware can affect steering accuracy just as much as the blocks themselves.  

Read more less