Team Associated RC10B6.2 Rear Suspension Arm, 73mm   ASC91853

Read more less

Team Associated B6 Laydown Idler Gear (39T) (91716)Keep your laydown transmission running smooth with these genuine Team Associated 39T idler gears. Designed for the RC10 B6, B6.1, and B6.2 series buggies with a laydown setup, these are the direct replacements you need for peak drivetrain performance. Includes: (2) 39T Idler Gears Compatibility: RC10 B6 RC10 B6.1 RC10 B6.2 (with laydown transmission)

Read more less

Team Associated RC10B7 Front Anti-Roll Sway Bars (5) [92459] 🌀 Precision in the Front, Grip in the Back!Upgrade your front-end handling with the Team Associated RC10B7 Front Anti-Roll Sway Bar Set. Whether you're fighting traction roll or just fine-tuning your buggy for max consistency, this 5-pack of sway bars gives you the tuning range you need to dominate any surface. Built for the RC10B7 and B7D platforms—just swap, test, and race! 🔧 Key Features:✅ Five sway bar options for ultimate front-end tuning🔄 Designed specifically for RC10B7 and B7D🎯 Helps maintain front grip and stability through corners🏁 Race-proven setup flexibility 📦 Includes:(5) Front Anti-Roll Sway Bars 🔩 Part Number: 92459🛠️ Compatible With: Team Associated RC10 B7 Team Associated RC10 B7D

Read more less

1up Racing 7075 LowPro Wing Washers – Lock It Down with Low-Profile Precision 💥 Keep your wing tight and your style tighter with the 1up Racing 7075 LowPro Wing Washers – the go-to choice for elite racers and style-focused builders. Whether you're launching off-road or speeding down the straight, these precision-machined aluminum washers are built to perform and look incredible doing it. 💪 Designed with no cutouts to trap dirt and an oversized 14mm diameter to reduce wing flex, these washers boost rear-end stability and give your ride that unmistakable 1up edge. ✨ Key Features: 🔩 7075 High-Strength Aluminum – Lightweight and tough enough for brutal landings📏 Low-Profile Design – No cutouts = no dirt buildup🌀 14mm Outer Diameter – Minimizes wing flex for consistent aero performance🎨 Available in 10 Anodized Colors – With mirror-like chamfered edges for that clean, pro look💡 Drag Car Ready – Clean body mount solution with aerodynamic benefit 📦 What’s Included? ✔️ (2) 7075 LowPro Wing Washers in your chosen color Note: Use with standard M3 flat head screws (not included). Slight screw head protrusion helps preserve the anodized finish. 🏁 Stay Locked. Stay Clean. Stay Fast. Whether you're racing, bashing, or building to win, the 1up Racing LowPro Wing Washers deliver race-ready function and next-level style. 💡 Finish Your Build Right – Add 1up Wing Washers to Your Setup Today!

Read more less

1up Racing Lockdown Adjustable Bullet Plugs – Tool-Free Power, Trackside Ready 🔧 Say goodbye to wobbly connections and clunky installs — the Lockdown Bullet Plugs by 1up Racing are here to redefine how you power your RC car. These are the world’s first fully tool-free adjustable bullet plugs, delivering max efficiency, minimal resistance, and an unbeatable fit — all with just a twist. 💡 With an innovative compression-fit system and eye-catching finishes, these aren’t just bullet plugs — they’re an upgrade in performance and style. ✨ Key Features: 🔧 Tool-Free Adjustable Design – Get a perfect fit in 5mm or 4mm sockets without a single tool⚡ Low Resistance, High Efficiency – Maximize power transfer from battery to ESC🌀 Easy-Grip Thumb Screws – Fast install, secure lock-in every time📏 Ultra-Low Profile – Only 8mm tall when installed (shorter than 1up Heatsink Bullets)🖤 Dual-Tone Style – 10 bold anodized colors for the positive plug, with a sleek black negative🌟 Mirror-Like Chamfer & Deep Laser Engraving – Looks as good as it performs💪 Lightweight & Durable – Built for serious racers who demand reliability 📦 What’s in the Box? ✔️ (2) Lockdown Adjustable Bullet Plugs (1x Positive Color, 1x Black Negative) 📌 Note: Installed height may vary slightly depending on your battery terminal’s snugness. Looser terminals = lower thumb screw depth. 🏁 Don’t Get Caught Slippin’ – Lock In with 1up! When every millisecond counts, 1up Racing’s Lockdown Bullet Plugs deliver unmatched grip, power, and pit-lane convenience. No tools, no fuss — just pro-grade power transfer and personalized style. 💡 Upgrade to Lockdown Plugs – Because “Good Enough” Ain’t Fast Enough.

Read more less

JConcepts Pin Swag 2.2" 4WD Buggy Front Tires (2) (Carpet) 🏁 Overview:The JConcepts Pin Swag 2.2" 4WD Buggy Front Tires are engineered to blend the best features of two proven designs—combining the outer lugs of the Swagger front tire with a dense pin arrangement for ultimate grip on carpet and turf surfaces. The Swag section is split down the center, allowing independent movement to conform to various track conditions, while the angular stagger section and vertical rib enhance precision handling. Features: ✔️ JConcepts original design with a fusion of pin and lug technology✔️ Low-profile carcass for stability and quick response✔️ Pin and Swag hybrid tread for increased surface contact and control✔️ Dense pin layout to improve wear resistance and longevity✔️ Hefty base pin with crisp edges for consistent bite✔️ Ultra-lightweight scalloped tire beads for reduced rotating mass In The Box: 📦 (2) JConcepts Pin Swag 2.2" 4WD Buggy Front Tires Compatibility: ✅ Fits 2.2" 4WD Front Buggy Wheels✅ Ideal for carpet and turf racing

Read more less

Upgrade your front end with precision, strength, and expanded tuning capability. Weighing just 10.9 grams, this aluminum R1WURKS B7 Front Ball Stud Mount is lighter than the stock plastic piece and adds two in-between ball stud positions for finer camber-link tuning. It also accepts the optional 10g internal weight for racers who want added front-end stability (sold separately). Features Skeletonized design for optimal strength-to-weight balance 0.6g lighter than the stock plastic mount High-strength 7075-T6 aluminum construction Precision CNC-machined for exact fit and alignment Matte black anodized finish with laser-etched R1 branding Two additional in-between camber link mounting holes Compatible with optional 10g internal weight Includes (1) R1WURKS B7 Front Ball Stud Mount, Aluminum Fitment B7 B7D T7 SC7 For best results, apply low-strength blue thread locker to all screws and tighten until snug. Avoid overtightening.

Read more less

Precision Engineering in a Compact Package The Team Associated RC28R Team Kit brings true competition-level on-road performance to the 1:28 scale. Designed by Team Associated’s AREA 51 engineers, the RC28R delivers professional racing features in a compact footprint, making it perfect for tight indoor tracks and serious mini-scale competition. Built on a low-center-of-gravity steel chassis plate, the RC28R offers exceptional stability, balance, and handling. Despite its small size, this platform is fully tunable and engineered for racers who demand precision and performance. This version now includes the Radbody Mako X clear body, tires, and white wheels, giving you a race-ready look right out of the box. Advanced Suspension & Tuning Capability The RC28R features a fixed-arm front suspension with optional molded upper arms for caster and camber tuning. A torsion-style side link system replaces traditional side springs and includes three stiffness options for dialing in grip and responsiveness. A threaded aluminum center shock allows adjustments to droop, spring preload, and pitch, while side damper tubes help fine-tune roll control. The adjustable rear pod roll center and included carbon fiber shims make adapting to track conditions fast and precise. Easy Access & Trackside Adjustability Designed with racers in mind, the RC28R allows quick battery changes without disturbing the center shock. The front bulkhead enables fast upper arm swaps while maintaining consistent geometry. An adjustable servo mount allows on-the-fly Ackermann tuning, giving you control over steering response as track conditions change. Race-Ready Design From the gear differential to the two-piece rear pod, the RC28R is built to be customized. The included white wheels accept optional front wheel flanges to fine-tune steering feel, while both hard plastic and polycarbonate body mount options provide flexibility for different bodies. A universal front bumper adds durability, and the included Radbody Mako X clear body and tires complete the package. Compact in size but loaded with race-grade features, the RC28R delivers performance that rivals much larger platforms. Features Steel chassis plate with low center of gravity Fixed-arm front suspension with optional tuning Torsion-style side links with multiple stiffness options Side damper tubes & threaded aluminum center shock Adjustable rear pod roll center Two-piece rear pod design Quick-access battery mount Radbody Mako X clear body and tires included White wheels compatible with optional front wheel flanges Includes (1) RC28R 1/28 2WD Team Kit (1) Radbody Mako X Clear Body (1) Set of Tires (1) Set of White Wheels Needed to Complete (1) 98mm Body (1) Two-Channel Surface Radio System (1) Electronic Speed Control (ESC) (1) Steering Servo (1) Motor (1) 2S LiPo Battery Pack (1) Battery Charger (1) Pinion Gear (4) Tires AA batteries for transmitter CA glue Thread locker Paint Specifications Scale: 1:28 Drive: RWD Power Source: Electric Length: 5.51in (140mm) Wheelbase: 3.86in (98mm) Width: Varies Height: Varies Weight: Varies Assembly Level: Kit Tech Note:RC kits are unassembled models that require racer-selected electronics and additional items to complete. Images of assembled vehicles are for illustrative purposes only.

Read more less

Fine-tune the rear suspension of your RC10B6.3 with the Wide “C” Arm Mount from Team Associated. Made from high-quality aluminum for added strength and precision, this Factory Team upgrade delivers improved durability and consistent geometry for high-performance setups. 🔥 Key Features: Factory Team aluminum arm mount for increased rigidity Wide “C” mount geometry for specific rear pivot configurations CNC-machined for precise fit and performance Hard-anodized finish for wear resistance and professional look Perfect for racers needing a durable, race-ready upgrade ✅ Compatibility: RC10B6.3 RC10B6.3D Also fits other RC10B6-series vehicles using the wide C arm mount configuration 📦 Includes: (1) Aluminum Arm Mount C (Wide) ⚠️ Tip:Pair with the correct A/B/D mounts to achieve your desired anti-squat and toe-in settings.

Read more less

These replacement front suspension arms are designed specifically for the Team Associated RC10B7 1/10 scale buggy. Built for strength and precision, they help maintain proper geometry and smooth suspension movement for peak performance on the track. ✅ Includes:• (2) Front Suspension Arms📦 Part Number: 92410🔧 Compatibility: RC10B7

Read more less

Team Associated RC10B7/B7D Factory Team Aluminum One-Piece Servo Mount (Blue) [92456] 💙 Lock It Down. Steer with Precision.Take your B7 or B7D to the next level with the Factory Team One-Piece Servo Mount! Crafted from ultra-light, tough-as-nails aluminum and finished in anodized blue with crisp chamfers and a laser-etched FT logo, this upgrade is all about flex-free performance and next-level style. Say goodbye to servo slop and hello to razor-sharp steering! 🔧 Upgrade Highlights:✅ One-piece flex-free design = increased steering precision🎯 Factory Team anodized finish with machined highlights💪 CNC aluminum construction—lightweight + durable✨ Laser-etched FT logo for pro-level bling 📦 Includes:(1) Blue Factory Team One-Piece Servo Mount 🔩 Part Number: 92456🚗 Compatible With: Team Associated RC10B7 Team Associated RC10B7D

Read more less

FlySky Noble NB4 Pro+ AFHDS3 18-Channel 2.4GHz Radio System w/ FGr4B & FGr8B Receivers 🔥 The Ultimate Transmitter for Champions! 🚗💨 The FlySky Noble NB4 Pro+ AFHDS3 18-Channel 2.4GHz Radio System is designed with elite RC racers and enthusiasts in mind. Packed with advanced technology, a high-resolution color touchscreen, and ultra-low latency response, this radio system delivers unmatched control, precision, and reliability. Whether you're racing, crawling, bashing, or flying, the NB4 Pro+ is the top choice of world champions! 🏆 With 18 programmable channels, a powerful 3450mAh battery for extended runtime, real-time telemetry monitoring, and USB Type-C connectivity, this system provides next-level customization, performance, and durability. The included FGr4B (4-channel) and FGr8B (8-channel) receivers ensure rock-solid signal stability with AFHDS3 digital frequency-hopping technology. ✨ Key Features: 🎮 18-Channel Support – Provides extensive control customization for multiple applications 🖥️ 3.5" Full-Dot Matrix Color Touchscreen – High-resolution 320x480 display for intuitive navigation ☀️ IPS High-Brightness Display – Designed for clear visibility even in direct sunlight 🎨 Customizable UI & Themes – Personalize the interface with custom wallpapers and channel names 🔌 USB Type-C Port – Supports coach mode, head tracking, and firmware updates 🔋 3450mAh Quick-Release Battery – Up to 18 hours of runtime with included power base 💾 Model Memory & Telemetry Support – Monitor real-time battery voltage, temperature, and signal strength 🔄 Adjustable & Detachable Steering Wheel – Configurable for left- or right-handed users 🏎️ Ultra-Low Latency 2CH Mode – Ensures instant response times for high-speed racing 📡 AFHDS3 Protocol – Automatic frequency-hopping technology eliminates interference 🚀 Ergonomic, Lightweight Design – Comfortable grip for extended use 🎒 Premium Carbon Fiber Carrying Case Included – Protects your radio system in style 📦 What’s in the Box? (1) FlySky Noble NB4 Pro+ AFHDS3 18-Channel 2.4GHz Radio System (1) FGr4B 2.4GHz 4-Channel AFHDS3 Receiver (1) FGr8B 2.4GHz 8-Channel AFHDS3 Receiver (1) 3450mAh 18650 Battery (1) Hard Carrying Case with Carbon Fiber Finish (1) FlySky Lanyard (1) Decal Sheet 📖 Product Manual 📌 Note: Everything needed is included—no additional accessories required! 📊 Specifications: Input Voltage: 1S LiPo / 3450mAh 18650 Battery Protocol: AFHDS3 Frequency: 2.4GHz RF Range: >300m Channels: 18 Dimensions (L x W x H): 5.62 x 4.72 x 9.13 in (142.7 x 120 x 232mm) Weight: 23.63 oz (670g) 🏁 Experience Unmatched Control & Performance! 🔥 Whether you're a competitive racer, rock crawler, or RC aviation enthusiast, the FlySky Noble NB4 Pro+ delivers next-generation precision, customization, and responsiveness. 💨 Upgrade today and take your RC experience to championship levels! 🏆🏁

Read more less

Dial in your aero and add a clean, pro finish to your 1/10 RC build with BOOF RC Wing Washers.These lightweight aluminum washers reinforce your wing mounting points, preventing cracks, pull-through, and premature wear — especially on high-downforce setups. Designed for racers who want performance, durability, and style without paying premium brand prices. Features: ✔️ Lightweight Aluminum Construction – Strong and low-mass for optimal wing support ✔️ Reduces Wing Damage – Prevents cracking and screw pull-through ✔️ CNC Machined Finish – Clean fitment with a premium look ✔️ Multiple Color Options – Customize your style ✔️ Easy Bolt-On Upgrade – Works with standard 1/10 wing hardware Specs: Fitment: 1/10 RC (buggy, touring, drift, basher) Material: Aluminum Hardware: M3 mounting compatible Pack: 2pcs (one pair) Available Colors: 🟥 Red⬛ Black🩶 Titanium🟦 Royal Blue🩵 Light Blue 🟩 Green🟪 Purple⭐ Gold🤍 Silver (Availability may vary) In the Pack: (2) BOOF RC Aluminum Wing Washers Perfect For: 1/10 Buggies 1/10 Touring & Drift High-downforce setups Bashers that break wings often Why BOOF RC? Affordable, clean, functional upgrades — without the silly markup.  

Read more less

  Give your brushless system the reliability and protection it deserves with the ProTek RC Braided Sensor Cable. Designed for high-performance RC setups, this premium cable ensures smooth, accurate communication between your ESC and motor — even in the most demanding conditions. Overview The ProTek RC braided sensor cable features flexible silicone-insulated internal wires protected by a rugged black nylon braided sheath. Heat-shrink reinforcement on both ends secures the braid, prevents wear, and keeps the harness stable through constant chassis flex and vibration. The result is a durable, smooth-bending sensor cable that maintains consistent signal integrity for peak motor performance. Compatible with any sensor-based brushless motor system that uses a standard replaceable 6-wire sensor harness. Features Tough nylon braided outer sheath for maximum protection Silicone-shielded internal wires Heat-shrink reinforced ends Flexible, shock-absorbing design Maintains clean and stable ESC–motor data transfer Compatible with all standard 6-wire brushless systems Ideal for racing or high-performance applications Includes (1) ProTek RC Braided Brushless Motor Sensor Cable — 200mm  

Read more less

Upgrade your brushless setup with the ProTek RC Braided Sensor Cable — built for durability, flexibility, and ultra-reliable data transfer between your ESC and motor. Whether you're racing or bashing, this premium sensor cable ensures clean communication and long-lasting performance. Overview The ProTek RC braided sensor cable uses flexible silicone-shielded internal wires wrapped in a tough nylon braided outer sheath for maximum protection. Heat-shrink ends secure the braid and reinforce the connection points, preventing damage or fraying. This creates a smooth-bending, shock-absorbing cable that maintains consistent sensor accuracy under extreme chassis movement. Perfect for any sensor-based brushless system that uses standard replaceable sensor harnesses. Features Durable black braided nylon outer sheath Silicone-shielded internal sensor wires Heat-shrink reinforced ends for long life Flexible, shock-absorbing design Ensures clean and consistent ESC–motor data transfer Compatible with all standard brushless systems using 6-wire sensor leads Great upgrade for racing applications Includes (1) ProTek RC Braided Brushless Motor Sensor Cable — 150mm

Read more less

Precision Steering. Proven Durability. Refresh or upgrade your steering setup with the Team Associated V2 Caster & Steering Blocks Set, designed specifically for the RC10T7 and RC10SC7 platforms. Built with Factory Team precision, these components deliver smooth steering response, consistent caster geometry, and the toughness to handle intense race conditions. V2 Performance Upgrade The updated V2 design refines steering feel and durability for improved handling and corner-entry precision. Whether you’re maintaining your race truck or tuning for optimal performance, these blocks keep your setup tight, aligned, and race-ready. Features: Genuine Team Associated V2 design for RC10T7 / RC10SC7 Provides precise steering response and consistent caster angle Durable composite construction built for high-stress racing Factory Team engineered for reliability and fit Includes: (1) RC10T7 V2 Caster & Steering Blocks Set Compatibility: Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated Factory Team — Engineered to Win.    

Read more less

  Precision and reliability come standard with the RC10B74 Steering Blocks from Team Associated. Designed for durability and consistent performance, these blocks are a direct fit for your RC10B74 front-end steering assembly. 🔧 Key Features: OEM replacement for stock steering blocks Molded composite construction for long-lasting strength Maintains factory geometry and performance Lightweight yet rugged design 📦 Includes: (2) Steering Blocks (left and right) ✅ Compatibility: Team Associated RC10B74 May fit other RC10B74 variants (consult manual for fitment) Restore your steering performance or keep a spare set in your pit bag—these steering blocks are an essential component for smooth, responsive control on the track.

Read more less

This is a pack of two replacement Team Associated RC10B74 Rear Hub Hinge Pins.  COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10B6.2Team Associated RC10B6.2D

Read more less

Team Associated Factory Team RC10T6.2/SC6.2 3.5mm Titanium Turnbuckle Set. This is an optional titanium turnbuckle set intended for the Team Associated T6.2 and SC6.2 platforms. Constructed from high quality titanium these offer increased durability over stock components while shedding weight and replace all the stock turnbuckles. Package includes two titanium front camber links, two titanium rear camber links and two titanium steering links.NOTE: 3.5mm Ballcups are required for installation (ASC92308). COMPATIBILITY:   Team Associated RC10 SC6.2Team Associated RC10 T6.2 

Read more less

Gens Ace Redline 2.0 2S Shorty LiHV Battery (7.6V/5000mAh) – 140C Burst Unleash the Voltage – Dominate the Track The Gens Ace Redline 2.0 LiHV Shorty Battery is built for serious RC racers looking for explosive acceleration, sustained voltage, and consistent performance. Featuring ultra-low internal resistance and a massive 140C discharge rating, this lightweight pack delivers big power in a compact footprint — perfect for 1/10 scale racing applications. ⚙️ Features: ⚡ 140C Continuous Discharge – massive power for competitive racing 🔋 7.6V 2S LiHV / 5000mAh Capacity – extended runtime with high-voltage punch 🔌 5mm Bullet Connectors – secure, high-amp power delivery 📏 Shorty LCG design – low-profile for improved chassis balance and handling ✅ Factory-matched cells for consistency and efficiency 📐 Specifications: Voltage: 7.6V (2S LiHV) Capacity: 5000mAh Continuous Discharge: 140C Max Charge Rate: 1C (5.3A) Configuration: 2S1P Watt Hours: 38Wh Connector Type: 5mm Bullet Balance Plug: 2mm Bullet Dimensions: 96 x 46 x 19mm Weight: 177g (6.24oz) 🏁 Whether you're battling it out on high-traction carpet or slick dirt tracks, the Gens Ace Redline 2.0 Shorty brings unmatched burst and endurance to your race day setup.

Read more less

Reedy Blackbox 610R 2S Competition ESC w/ PROgrammer2 – Next-Level Performance & Precision! Take your RC racing performance to the next level with the Reedy Blackbox 610R 2S Competition ESC, designed for elite-level throttle response, braking precision, and customizable tuning options. Building on the success of the Blackbox 510R, the 610R features updated 32-bit hardware for crisper throttle feel, smoother braking, and enhanced tuning flexibility. Whether you're running stock or modified 1/10 applications, this ESC delivers race-winning control and power. Paired with the included Blackbox PROgrammer2, racers can unlock advanced settings, monitor battery health, and update firmware, making it the ultimate tool for fine-tuning your setup. Key Features: ✅ CNC-Machined Black Aluminum Case w/ Integrated Heat Sink – Provides superior cooling and durability.✅ 32-Bit Microcontroller Unit (MCU) – Ensures precise throttle and brake control with ultra-smooth response.✅ Fully Adjustable Brake, Throttle, Power & Safety Functions – Fine-tune your setup for maximum performance.✅ Blinky Mode with ROAR-Approved Software – Legal for stock class racing.✅ Ultra-Low Resistance FET Board – Delivers efficient power delivery and minimal heat buildup.✅ On-Board Power Button – Convenient and reliable operation.✅ Solder Tabs with 13-Gauge Power Wires – Ensures high current flow for optimal efficiency.✅ Pro External Capacitor Board – Improves voltage stability and consistency.✅ RPM & ESC Temp Data Logging – Monitor real-time performance with the Blackbox PROgrammer2.✅ Firmware Updateable – Stay ahead of the competition with upgradable software. Blackbox PROgrammer2 – Unlock Full Tuning Potential! With the included PROgrammer2, racers can adjust: 🔹 Brake Settings: Fine-tune brake strength, frequency, drag brake, and punch for the ultimate stopping power.🔹 Throttle Control: Adjust drive frequency, punch, initial throttle, current limits, and dead band for a dialed-in feel.🔹 Motor Power: Customize timing and boost settings for maximum speed and acceleration on large tracks.🔹 Miscellaneous Controls: Modify BEC voltage, low voltage cutoff, overheating protection, and reverse settings for the perfect race setup. 📌 Note: The Blackbox 610R requires the ASC27027 Programmer with firmware version EE460139 (included in this combo). Specifications: Voltage Input: 2S LiPo Suggested Applications: 1/10 Off-Road, 1/10 On-Road Resistance (Ohms): 0.00043 Continuous Current: 160A Dimensions: 38.5 x 36.9 x 19.5mm Motor Limit: 4.5T Weight (w/o Wires & Fan): 45g BEC (Adjustable): 6.0V - 7.4V / 5A Power Wires: 13-Gauge Silicone Cooling Fan: Optional In the Box: (1) Reedy Blackbox 610R 2S Competition ESC (1) Blackbox PROgrammer2 (1) External Capacitor Board (1) Instruction Manual Race-Proven Performance & Customization at Your Fingertips! Whether you're competing in stock or modified racing, the Reedy Blackbox 610R delivers incredible throttle precision, braking control, and power efficiency. With full tuning capabilities via the Blackbox PROgrammer2, you can tailor every aspect of your ESC to fit your driving style and track conditions. 🔥 Upgrade today and experience championship-winning control with the Reedy Blackbox 610R! 🏁💨  

Read more less

The Team Associated Reedy Power Servo Wire Extension Leads are the perfect solution for clean and reliable wiring in your RC build. Whether you’re routing around a large chassis or need extra length to reach your ESC or receiver, these premium extensions ensure a secure and low-resistance connection every time. Available in three convenient lengths (100mm, 150mm, and 200mm), they make it easy to achieve a tidy, professional-grade layout while maintaining top-level electrical performance. ⚙️ Features: Ideal for extending servo or ESC leads in any RC application High-quality, flexible wire for smooth routing and durability Cleanly connects servo to speed controller with minimal resistance Available in multiple lengths for the perfect fit in any setup Factory-terminated with precision connectors for plug-and-play use 📏 Specifications: Part Numbers: 100mm (3.93") — 27143 150mm (5.90") — 27144 200mm (7.87") — 27145 Connector Type: Standard Servo Plug (JR-Style) Lengths Available: 100mm / 150mm / 200mm Wire Gauge: 26 AWG (Flexible silicone wire) Brand: Reedy Power (by Team Associated) 📦 Includes: (1) Servo Wire Extension Lead (Choose Length) 💡 Pro Tip:Use the shortest extension that fits your layout — shorter wires reduce electrical resistance and keep your build looking clean and efficient.  

Read more less

🔧 Premium V2 Screw-Mount Front Shock ShaftsUpgrade your buggy's performance and durability with these Ti-Nitride coated 3x21mm shock shafts—built for smooth suspension action and long life! 💡 Key Features: Ti-Nitride coating reduces wear and improves shock performance Screw-mounted design keeps pistons secure NOT compatible with E-clip pistons 🔩 Includes:(2) Front Shock Shafts – 3x21mm ✅ Compatibility:Use with ASC91576 V2 shock bodies  

Read more less

Team Associated RC10B74 Differential Gasket & O-Rings – ASC92133🛠️ Keep It Sealed. Keep It Smooth. Maintain peak diff performance with this genuine Team Associated Differential Gasket & O-Ring Set for your RC10B74. Whether you're doing routine maintenance or a full rebuild, these factory-replacement parts help ensure a proper seal and smooth, consistent action. ✅ Perfect fit for RC10B74 front, center, or rear diffs✅ Helps prevent leaks and maintains consistent fluid pressure✅ Made from high-quality materials for long-lasting performance 📦 Includes:• (1) Differential Gasket• (2) 5x1.5mm O-Rings 🔢 Part Number: ASC92133🏁 Brand: Team Associated

Read more less

Dial in elite front-end steering and precision with the JConcepts Pin Swag LP Wide 2.2" Front Carpet Tires — engineered for today’s high-grip carpet racing where responsiveness, consistency, and low-rolling resistance matter most. Designed for 2WD front buggies, the Pin Swag blends the proven outer lug profile of the Swagger with a dense cluster of micro pins for unreal grip and smooth, predictable steering. The wide, low-profile carcass offers a larger contact patch and flatter feel, helping your buggy stay aggressive without getting twitchy. Hybrid Pin + Swag Traction The design combines: Outer Swag lugs for crisp steering bite Tightly packed round pins for smooth forward grip and minimized wear A split center section that flexes naturally for carpet surface compliance Together, they deliver a fast, confident front-end feel that works across layouts — technical, high speed, or tight and grippy. Engineered for Carpet Performance Built on the same low-profile concept that made the Fuzz Bites so successful, the Pin Swag rolls through corners with ease. A vertical rib paired with a staggered inside section adds stability on corner entry, while the directional layout provides consistent steering through the full rotation. The scalloped tire beads remove unnecessary weight, reducing rotational mass and helping your buggy accelerate and rotate quicker through the infield. Features JConcepts original hybrid Pin + Swag lug design Low-profile, wide-body carcass for increased front contact patch Crisp-tipped round pins for maximum bite Durable, dense pin layout to minimize wear Smooth Swag transition near the sidewall for predictable cornering Ultra-light scalloped beads for reduced rotating mass Compatible with all standard 2.2” 2WD front buggy wheels Includes (2) Pin Swag LP Wide 2.2" 2WD Front Buggy Tires (Pink Compound) (2) Low-profile scalloped foam inserts  

Read more less

Fine-tune your buggy’s balance and handling with the Team Associated Steel Servo Chassis Weight, designed specifically for the RC10B6 and B6D platforms. Weighing in at 24 grams, this precision steel weight mounts securely under the servo to help lower the center of gravity and improve front-end stability — perfect for high-grip surfaces or drivers looking for a more planted feel. Constructed from high-quality steel, this tuning upgrade helps smooth steering response and adds consistency through corners without compromising agility. Installation is quick and easy using the included mounting screws. ⚙️ Features: Adds 24 grams of weight to optimize front-to-rear balance Lowers center of gravity for improved handling and steering feel Precision fit for Team Associated B6 and B6D buggies Ideal for high-traction tracks and fine-tuning race setups Made from durable steel for long-lasting performance Includes mounting hardware for easy installation 📏 Specifications: Part Number: 91747 Material: Steel Weight: 24g Vehicle Compatibility: Team Associated RC10B6 / B6D 📦 Includes: (1) 24g Steel Servo Chassis Weight (2) Mounting Screws 💡 Pro Tip:Combine this servo weight with a rear ballast plate or brass front bulkhead for the ultimate balance adjustment — helping you dial in your buggy to match any track condition.

Read more less

Upgrade your 13mm shocks with these Factory Team precision pistons from Team Associated. The #91934 2x1.8mm shock pistons are designed with a 2.5mm thickness for added tuning flexibility and smoother damping response—perfect for racers fine-tuning their suspension on high-traction surfaces.📦 Includes: (2) FT 13mm Shock Pistons – 2x1.8mm hole layout 2.5mm thick ⚙️ Key Features: CNC-machined precision for consistent performance 13mm piston design fits Team Associated’s latest shocks Ideal for carpet, astro, or high-grip clay tracks Designed for RC10B6.4, RC10B74.2, and other AE vehicles using 13mm shocks 📌 Tuning Tip: Smaller holes (1.8mm) and thicker pistons increase pack and slow down shock speed, which is great for improved control on high-traction tracks or smoother landings. Let me know if you'd like a matching version for other piston sizes or to bundle with 13mm shock sets!

Read more less

Overview:Secure your battery with confidence using the Team Associated RC10B7 Factory Team Battery Mount Set. Designed as a precision upgrade over the standard mounts, this Factory Team kit delivers improved strength, reduced flex, and a cleaner look for your B7 buggy. With its lightweight design and race-proven durability, it’s the perfect addition for serious racers who demand reliability and performance. Features: Factory Team precision-machined components for strength and fit Securely holds battery in place under high loads and hard landings Lightweight design reduces unnecessary weight Provides a cleaner, more professional chassis layout Genuine Team Associated Factory Team upgrade Compatibility: Team Associated RC10B7 1/10 2WD Buggy Includes: (1) Factory Team Battery Mount Set (with mounting hardware) Part Number: 92482 ⚡ Pro Tip: Pair this with the B7 Factory Team Carbon Side Rails (92483) for the ultimate lightweight and rigid chassis setup.  

Read more less

Dial in your drivetrain with the Team Associated RC10B74 Center Differential Spur Gear Set! This set includes both a 72-tooth and a 78-tooth spur gear, giving you versatile gearing options to match your track conditions and driving style. 🔧 Key Features: Includes (1) 72T and (1) 78T spur gear Precision-molded for smooth and efficient power delivery Allows for quick gearing adjustments for acceleration or top speed Genuine Team Associated parts ensure perfect fit and durability ✅ Compatibility: Team Associated RC10B74 May also fit other B74-based platforms with center differential setups Tweak your setup for the perfect balance of speed and control—whether you're hitting the straights or tightening your corners!

Read more less

This is a replacement Stiffezel Rear Arm Set for the Team Losi Racing 22 5.0 DC Elite 1/10 2WD Electric Buggy. Designed for VHA (Variable Hinge Angle) setups, these rear arms are optimized for dirt and clay tracks, offering enhanced rigidity and consistent performance. ✅ Fits:• TLR 22 5.0 DC Elite (2WD Buggy) ✅ Includes:• (1) Pair of VHA Stiffezel Rear Suspension Arms Perfect for racers looking to maintain top-tier handling and durability on loose surfaces.

Read more less

Upgrade your 22 5.0 series with precision gearing using the TLR 48 Pitch SHDS Spur Gear. Designed for use with the optional TLR Complete SHD Slipper System (TLR232085), these spur gears offer smooth, consistent performance and are available in a variety of tooth counts from 69T to 81T. ✅ Compatible with:• Losi 22 5.0 (with SHD Slipper System) ✅ Features:• High-strength composite construction• Available in multiple tooth counts (69T–81T)• Designed for 48 pitch setups• Perfect for fine-tuning your gear ratio 📦 Includes:(1) SHDS Spur Gear (choose tooth count)

Read more less

Team Associated RC10B7 Shock Tower Covers & Upper Wing Mount [92487] 💥 Upgrade your B7 with Precision Fit & Factory Style!Keep your buggy looking factory fresh and race-ready with the Team Associated RC10B7 Shock Tower Covers & Upper Wing Mount. Designed specifically for the RC10B7 platform, this set adds clean protection for your shock towers while locking down your rear wing with a durable, lightweight upper mount setup. 🏁 Why You’ll Love It:✅ Direct fit for the B7 platform—no mods needed🛡️ Protects your shock towers from dirt, debris, and damage🚀 Lightweight upper wing mount keeps your wing locked and stable🔩 Includes all the hardware you need—bolt it on and go! 📦 Includes:(2) Front Shock Tower Covers(1) Rear Shock Tower Cover(1) Upper Wing Mount SetMounting Hardware 🛠️ Part Number: 92487🏎️ Vehicle Compatibility: Team Associated RC10B7  

Read more less

Upgrade your drivetrain with the Team Associated Factory Team 11mm Octalock LCF Slipper Pad. Originally launched with the RC10B74.1 buggy, this pad is designed to work with Octalock spur gears and offers smoother, more consistent slipper performance. It also serves as an optional upgrade for the original RC10 B74 series. ✅ Factory Team Performance – Designed for competitive precision and durability✅ Octalock Compatible – Works with Team Associated Octalock spur gears✅ Optional Upgrade – Updates older B74 models to the latest slipper assembly✅ Race Proven – Trusted by Team Associated drivers worldwide Compatibility: Team Associated RC10 B74 (original) Team Associated RC10 B74.1 Team Associated RC10 B74.1D A must-have for serious racers, the 11mm Octalock LCF Slipper Pad keeps your buggy smooth, efficient, and race-ready.

Read more less

Team Associated RC10B74.2 FT Chassis Protective Sheet. This is an optional chassis protective sheet intended to fit the Team Associated RC10B74.2 buggy. Using high quality adhesive backed vinyl, Team Associated has created a durable protective surface that not only is functional but looks great! Printed on the sheet is an accurate depiction of the B74.2 drivetrain layout, providing an "X-Ray" style look to the bottom of your vehicle. Package includes one main chassis protection sheet and three tail pieces giving you two extras.   COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated RC10B74.1/RC10B74.1D Factory Team LTC Plastic Differential Rebuild Set. This is an optional differential rebuild set intended for the RC10B74.1 and RC10B74.1D. This differential rebuild uses the updated LTC (Low Torque Capacity) gearset allowing for improved driveability and traction. The high tooth count on the gears makes for smoother differential action that won't lock on power. NOTE: Recommended starting diff oils for dirt and clay are 15k (ASC5447) front, 200k (ASC5461) center, 10k (ASC5455) rear. Recommended starting diff oils for carpet and Astro turf are 20k (ASC5456) front, 15k (ASC5447) rear. COMPATIBILITY: Team Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less