Keep your RC10TC8 running smooth and reliable with this genuine Team Associated replacement part. The 38T Differential Case is designed specifically for the RC10TC8 platform, ensuring precision fit and long-lasting performance. Perfect for maintaining your drivetrain and keeping you race-ready. Features: Official Team Associated replacement part Designed for the RC10TC8 platform Durable construction for smooth differential operation Includes: (1) Differential Case (38T)

Read more less

Boost drivetrain efficiency and durability with the Exalt Hybrid-XSN Ceramic Bearing Kit for the Team Associated B74.2. Featuring Silicon Nitride ceramic balls paired with stainless steel inner/outer rings, these bearings deliver smoother, faster performance than steel bearings while being more impact-resistant than full ceramic designs. Each kit comes lightly lubricated with Exalt Oil Slick Hi-Speed PTFE Bearing Oil for ready-to-race performance. 🔥 Key Features: Engineered for the Team Associated B74.2 1/10 4WD Buggy Hybrid design: Silicon Nitride ceramic balls + stainless steel rings Faster, smoother operation than steel bearings More durable under impact than full ceramic bearings Pre-lubed with Exalt Oil Slick Hi-Speed PTFE Bearing Oil (EXA9314) Serviceable design — clean with citrus cleaner or acetone, re-oil as needed Built for maximum performance in spec and modified racing ✅ Compatibility: Team Associated RC10B74.2 1/10 4WD Buggy 📦 Includes: (18) Hybrid-XSN Ceramic Bearings (complete kit for B74.2) ⚠️ Tip:Inspect bearings before each race — re-oil as needed for peak speed, smoothness, and longevity.  

Read more less

Restore factory handling or upgrade worn parts with the Rear Suspension Arms for Team Associated 1/10 scale buggies. These durable molded arms are built to withstand the demands of competitive racing while maintaining the precise geometry your vehicle needs for consistent lap times. 🔥 Key Features: Genuine Team Associated replacement part Molded composite construction for durability and flex balance Maintains factory suspension geometry for consistent handling Direct replacement for stock rear arms Designed for competitive off-road performance ✅ Compatibility: Touring Car (TC6.2, TC7.1, TC7.2, TC7.4)   📦 Includes: (1) Left Rear Suspension Arm (1) Right Rear Suspension Arm ⚠️ Tip:Check hinge pin holes and arm ends regularly—excessive wear can affect alignment and handling.

Read more less

Fine-tune your steering geometry with the 4° Caster Blocks from Team Associated. These precision-molded components set the front suspension caster angle, helping you balance steering response, stability, and cornering performance to match track conditions. 🔥 Key Features: 4° caster angle for balanced steering and stability Molded composite construction for durability and precision fit Direct replacement part for worn or damaged caster blocks Designed for race-proven suspension geometry Easy installation with factory hardware ✅ Compatibility: Team Associated TC7 OriginalTeam Associated TC7.1Team Associated TC7.2 📦 Includes: (1) Left Caster Block (4°) (1) Right Caster Block (4°) ⚠️ Tip:Changing caster affects corner entry and straight-line stability—less caster = more steering response, more caster = better stability.

Read more less

Maintain precise axle spacing and bearing alignment with these 5.6mm Axle Crush Tubes from Team Associated. Designed to sit between axle bearings, these tubes help reduce side loading, extend bearing life, and keep your drivetrain running smooth under racing conditions. 🔥 Key Features: Precision 5.6mm length for accurate axle spacing Reduces bearing side load and wear Helps maintain drivetrain efficiency and consistency Machined to Team Associated’s factory specifications Lightweight and durable for competitive applications ✅ Compatibility: Fits multiple Team Associated vehicles requiring 5.6mm axle crush tubes Commonly used in RC10B series and other AE 1/10 vehicles Check your manual for exact placement and fitment 📦 Includes: (4) 5.6mm Axle Crush Tubes ⚠️ Tip:Always replace worn crush tubes when servicing axles or bearings to ensure maximum drivetrain life.

Read more less

Fine-tune your drivetrain or suspension with precision using these Team Associated 5.1x8.0x0.20mm shims. Whether you're adjusting spacing, reducing play, or dialing in alignment, these thin profile shims provide the subtle tweaks that matter in competitive setups. 📏 Specifications: Inner Diameter: 5.1mm Outer Diameter: 8.0mm Thickness: 0.20mm Material: Steel Quantity: (Check product packaging—typically sold in packs) 🛠️ Common Uses: Differential spacing Suspension tuning Slop removal on pivot points or shafts ✅ Compatibility: RC10B74 series Universal use for other 5mm shaft applications Essential for racers looking for ultra-fine tuning adjustments. Keep these handy in your pit box!

Read more less

Upgrade or replace your servo mounting solution with the Team Associated RC10B74.1 Servo Mount. Precision-machined and built to secure your steering servo in place, this factory replacement part ensures solid, reliable performance lap after lap. 📌 Key Features: Direct replacement for the stock servo mount Compatible with RC10B74.1 chassis layout Ensures secure, vibration-free servo positioning Factory Team durability and fitment ✅ Compatibility: RC10B74.1 May also be compatible with other RC10B74-series vehicles depending on configuration This part is essential for maintaining proper steering geometry and performance under race conditions. Keep your servo locked in and dialed.

Read more less

Give your RC10B74.1 the perfect balance of flex and rigidity with the Factory Team Flex Chassis Brace Support Set. Crafted from 2.0mm carbon fiber, this brace set is optimized to allow controlled flex in the chassis for enhanced traction and handling on a variety of track conditions. 📌 Key Features: Factory Team carbon fiber construction 2.0mm thickness provides the ideal flex characteristics Designed to tune chassis response for high-traction or bumpy tracks Lightweight and durable for competitive performance 📦 Includes: (1) Front Flex Chassis Brace Support (1) Rear Flex Chassis Brace Support ✅ Compatibility: RC10B74.1 May also be used on other B74 models with compatible geometry For racers looking to fine-tune handling without sacrificing durability, this Factory Team upgrade is a must-have.

Read more less

Upgrade your RC10B74.1 with the Factory Team Carbon Fiber Chassis Brace Support Set. Precision-cut from 2.0mm carbon fiber, this lightweight and rigid brace support enhances chassis stiffness and tuning capabilities—ideal for racers looking to fine-tune flex characteristics for maximum track performance. 📌 Key Features: Precision CNC-machined carbon fiber construction 2.0mm thick for optimized strength-to-weight ratio Reduces chassis flex for more consistent handling Essential for high-traction racing surfaces 📦 Includes: (1) Front chassis brace support (1) Rear chassis brace support ✅ Compatibility: RC10B74.1 May be used on other B74 variants with matching geometry Built for performance-minded racers chasing precision and durability.

Read more less

Upgrade your RC10B74 series buggy with these Factory Team Carbon Fiber Chassis Braces. Designed for increased stiffness and responsiveness, these lightweight carbon braces enhance durability while delivering consistent performance on high-traction surfaces. 📌 Key Features: Lightweight 2.5mm carbon fiber construction Increases chassis stiffness and rigidity Enhances overall handling precision Direct Factory Team upgrade for stock braces 📦 Includes: (1) Front carbon chassis brace (1) Rear carbon chassis brace ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2 RC10B74.2D A must-have hop-up for serious racers seeking that perfect balance of strength and responsiveness.

Read more less

Upgrade your RC10B74.2 with the Factory Team Top Plate Kit, engineered for improved front-end strength and rigidity. This precision CNC-machined kit enhances durability while maintaining a lightweight design — perfect for serious racers looking to increase performance and chassis tuning options. 📌 Key Features: Factory Team precision fit and finish Provides increased stiffness to the front chassis area Reduces flex in high-load conditions Lightweight, durable construction 📦 Includes: (1) Factory Team top plate (1) Top plate brace Required mounting hardware ✅ Compatibility: RC10B74.2 RC10B74.2D Optimize your front-end stability and keep your steering precise with this must-have tuning upgrade from Team Associated!

Read more less

Upgrade your RC10B74.1 with this Factory Team LTC (Low Torque Capacity) Differential Set, designed to reduce rotational mass and improve acceleration and handling. This set includes both the front and rear differentials, offering a complete solution for racers seeking increased efficiency and improved cornering response. 📌 Key Features: Complete front and rear differential set Lightweight LTC design for reduced rotating mass Enhanced on-power steering and corner exit traction Factory Team components ensure a precise fit and long-term durability 📦 Includes: (2) LTC gear differential assemblies (front & rear) Internal gears and seals pre-installed Ready to fill with your preferred silicone diff fluid ✅ Compatibility: RC10B74.1 RC10B74.1D May also be used with RC10B74.2 platforms as a tuning option

Read more less

Boost chassis rigidity and improve handling response with the Factory Team 2.5mm Carbon Fiber Stiff Chassis Brace Support Set for the RC10B74.2. This upgrade provides enhanced stiffness across the center section of the buggy, helping to reduce unwanted flex and improve overall consistency, especially on high-grip tracks. 📌 Key Features: Precision-machined 2.5mm carbon fiber construction Stiffens chassis flex in key areas Lightweight with high-strength performance Ideal for high-traction surfaces or aggressive driving styles 📦 Includes: (1) Carbon fiber front brace support (1) Carbon fiber rear brace support ✅ Compatibility: Team Associated RC10B74.2 and B74.2D Factory Team tuned fit and finish

Read more less

Upgrade your RC10B74.2 with the Factory Team Decoupled Slipper Shaft Outdrive Set. Designed for use with the decoupled slipper system, this precision-engineered outdrive set provides improved drivetrain durability and smooth power delivery, making it essential for high-level competition and maintenance. 📌 Key Features: Factory Team performance-grade components Designed for decoupled slipper configuration Enhances drivetrain strength and efficiency Precision-machined for accurate fit and finish 📦 Includes: (1) Pair of shaft outdrives (left & right) Hardware required for installation ✅ Compatibility: RC10B74.2 Works in conjunction with the Factory Team decoupled slipper system

Read more less

Optimize your drivetrain performance with the Factory Team Decoupled Slipper Hub and Pads for the RC10B74.2. Designed to work with the decoupled slipper system, this upgrade reduces front wheel influence during off-power cornering and braking, providing smoother handling and increased mid-corner stability on high-grip tracks. 📌 Key Features: Factory Team precision upgrade Designed for use with decoupled slipper setups Reduces braking drag and improves off-power steering Helps maintain consistent rear traction High-quality slipper pads included 📦 Includes: (1) Decoupled Slipper Hub (2) Slipper Pads ✅ Compatibility: Team Associated RC10B74.2 May also fit other RC10B74 variants using a decoupled slipper configuration

Read more less

Upgrade your RC10B74.2 with this official Team Associated Servo Mount Set, specifically designed for use with the decoupled slipper configuration. Precision-engineered for perfect fit and performance, this set ensures secure servo mounting and consistent servo alignment during extreme track action. 🔩 Key Features: Designed for RC10B74.2 vehicles Compatible with decoupled slipper setups Factory Team precision fit and finish Includes both left and right servo mounts 📦 Includes: (1) Left Servo Mount (1) Right Servo Mount ✅ Compatibility: Team Associated RC10B74.2 Vehicles using the decoupled slipper layout

Read more less

Overview:Upgrade your buggy with the Team Associated RC10B84 Factory Team Carbon Side Rails. Made from high-quality carbon fiber, these side rails reduce weight and add rigidity compared to the standard composite rails. The result is a stiffer chassis with improved response, perfect for racers looking to maximize performance on high-traction tracks. Features: Carbon fiber construction for lightweight strength Adds rigidity to the chassis for sharper handling Reduces overall vehicle weight Direct replacement for stock composite side rails Genuine Factory Team performance upgrade Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Set of Factory Team Carbon Side Rails Part Number: 92502 ⚡ Pro Tip: Pair these with the Factory Team Carbon Chassis Braces (92504) for a fully optimized lightweight and rigid chassis setup.

Read more less

Overview:Reinforce your buggy’s backbone with the Team Associated RC10B84 Chassis Braces. Designed to stiffen the chassis and improve durability, these braces help maintain consistent handling by reducing flex under high loads. Whether you’re replacing worn parts or fine-tuning chassis stiffness, this set ensures your B84 stays reliable and race-ready. Features: Complete chassis brace set for the B84 Provides added rigidity and durability Helps maintain consistent handling and driveline alignment Molded composite construction for strength with balanced flex Genuine Team Associated replacement part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Chassis Brace Set (front and rear braces with hardware) Part Number: 92503 ⚡ Pro Tip: Upgrade to the Factory Team Carbon Chassis Braces (92504) for reduced weight and even greater stiffness if you’re racing on high-traction tracks.

Read more less

Overview:Boost performance and durability with the Team Associated RC10B84 Factory Team Carbon Front Suspension Arms. Constructed from carbon composite material, these arms provide increased stiffness and reduced flex compared to standard arms—delivering sharper steering response, improved cornering consistency, and the durability needed for high-level racing. Features: Carbon composite construction for added stiffness and strength Reduces flex for more consistent suspension geometry Improves steering precision and cornering stability Lightweight design helps lower overall vehicle weight Genuine Factory Team upgrade part Compatibility: Team Associated RC10B84 1/10 4WD Buggy (Front suspension) Includes: (1) Set of Carbon Front Suspension Arms Part Number: 92515 ⚡ Pro Tip: Pair these with the Factory Team carbon rear arms (92516) for a fully upgraded suspension setup that maximizes handling precision on high-traction tracks.  

Read more less

Overview:Fine-tune your buggy’s steering geometry with the Team Associated RC10B84 Caster Inserts. These precision-molded inserts allow racers to adjust caster angle quickly and easily, giving you the flexibility to dial in steering response and stability for any track condition. A must-have tuning option for serious B84 racers. Features: Precision-molded caster adjustment inserts Allows quick and accurate caster angle changes Improves steering response and stability based on track surface Lightweight and durable construction Genuine Team Associated tuning part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Set of Caster Inserts (various angles) Part Number: 92522 ⚡ Pro Tip: Use less caster (lower angle) for quicker steering response on high-traction tracks, and more caster (higher angle) for improved straight-line stability on rough or low-traction surfaces.

Read more less

Overview:The Team Associated RC10B84 Arm Mount D is a precision-machined suspension mount designed for the rear end of the B84. Built to deliver strength and accuracy, this mount ensures the suspension arms stay properly aligned under extreme racing conditions. Whether you’re replacing a worn part or fine-tuning your setup, the Arm Mount D provides a reliable foundation for consistent handling and durability. Features: CNC-machined for precise hinge pin alignment Adds strength and rigidity to the rear suspension assembly Durable construction for long-lasting performance Genuine Team Associated factory replacement/upgrade part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Arm Mount D Part Number: 92540 ⚡ Pro Tip: Pair the Arm Mount D with the Arm Mount Backing Plate (92541) for maximum suspension durability and consistent geometry under heavy loads.

Read more less

Overview:The Team Associated RC10B84 Arm Mount Backing Plate is a precision-machined component designed to reinforce the suspension arm mounts on your buggy. By adding strength and stability to the rear suspension assembly, this backing plate helps maintain precise alignment under high loads, ensuring consistent handling and durability during hard racing conditions. Features: Strengthens and supports the suspension arm mount assembly Maintains proper alignment under heavy loads and impacts Machined for a perfect fit with the RC10B84 chassis Genuine Team Associated Factory Team part for race-proven reliability Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Arm Mount Backing Plate Part Number: 92541 ⚡ Pro Tip: Use this backing plate with the B84 aluminum arm mounts for maximum suspension rigidity and improved cornering consistency.

Read more less

Upgrade your drivetrain with the XRAY Composite Adjustment Ball-Bearing Hubs. Engineered for precision and durability, these hubs provide smoother rotation, reduced friction, and consistent performance under high-stress racing conditions. Features: Strong composite construction for lightweight durability Precision ball-bearing design for smoother drivetrain performance Helps reduce slop and improve efficiency Easy installation and long-lasting reliability Includes: (2) Composite Adjustment Ball-Bearing Hubs Compatibility: Fits XRAY XB2 / XT2 / XB4 platforms (check manual for specific fitment)

Read more less

Take your drivetrain performance to the next level with the XRAY Composite 3G Gear Box (Graphite). Designed to work with the chassis brace, this lightweight yet ultra-strong graphite-reinforced set delivers maximum durability and precision fitment. Perfect for racers who demand reliability and performance lap after lap. Features: High-strength graphite composite material Optimized 3rd generation (3G) design for improved stiffness and efficiency Works with the chassis brace system for enhanced stability Lightweight construction without sacrificing strength Precision-molded for a perfect XRAY factory fit Compatibility: XRAY XB2 XRAY XT2 Other XRAY models requiring 3G gearbox with chassis brace Includes: Complete Composite 3G Gear Box (Graphite) Set

Read more less

Upgrade your ride with these precision-engineered 55mm Adjustable Turnbuckles, crafted from world-renowned HUDY Spring Steel™ for unmatched strength and durability. Featuring M3 left- and right-hand threads, they allow for easy and precise suspension and steering adjustments without removing them from the car. Features: Premium HUDY Spring Steel™ for maximum lifespan and toughness 55mm length – ideal fit for multiple XB2/XT2 suspension applications M3 left & right threads for fast, fine adjustments Black coating for wear resistance and a pro finish Includes two turnbuckles Compatibility: XRAY XB2 XRAY XT2 Other XRAY models requiring 55mm M3 turnbuckles Includes: (2) 55mm Adjustable Turnbuckles

Read more less

Fine-tune your XB2’s handling with the XRAY 2024 Front Anti-Roll Bars. These sway bars allow you to balance steering response and cornering stability to match track conditions. Overview:Adjusting the front anti-roll bar directly affects steering response and front-end stability: Softer bar (thinner mm): Increases front grip and stability in low-traction conditions Stiffer bar (thicker mm): Reduces body roll for precise cornering but may decrease front-end grip Available Sizes: 0.8mm (Softest) – XRA322489 1.0mm – XRA322490 1.1mm – XRA322491 1.2mm – XRA322492 1.3mm (Hardest) – XRA322493 Effects of Roll Bar Changes: Softer bar: More chassis roll, more cornering grip, slower response Stiffer bar: Less chassis roll, quicker steering response, less cornering grip Compatibility: XRAY XB2 (2024 and later) Includes: (1) Anti-Roll Bar in chosen thickness    

Read more less

Upgrade your front end with XRAY’s Graphite Composite Steering Block for the XB2. Molded from a reinforced graphite composite material, this steering block provides increased strength and precision compared to standard composite parts, ensuring smoother steering response and long-lasting durability. Features: Strong graphite composite material for added rigidity Enhances steering consistency and precision Direct replacement upgrade for stock XB2 steering blocks Lightweight yet durable design Compatibility: XRAY XB2 (all versions) Other XRAY platforms using XB2 steering blocks Includes: (1) Graphite Composite Steering Block – 322250-G

Read more less

Upgrade your XB2 with this Hard Composite Front Left Suspension Arm featuring Low Shock Mounting (LSM) geometry in the short configuration. The Hard material provides extra durability and reduced flex, making it perfect for high-traction surfaces where stability and consistent handling are critical. Features: Hard composite blend for maximum durability and precision Low Shock Mounting (LSM) design optimizes suspension geometry Short length design sharpens steering response Manufactured by XRAY for factory-perfect fit Compatibility: XRAY XB2 (All variants using LSM geometry) Includes: (1) Front Left Suspension Arm – Short – Hard

Read more less

Upgrade your XRAY XB2 with this Hard Composite Front Lower Left Suspension Arm featuring Low Shock Mounting (LSM) geometry. Designed for maximum durability and precision, this arm is ideal for high-traction conditions where reduced flex translates into improved consistency and cornering stability. Features: Hard composite construction for increased stiffness Low Shock Mounting design for improved suspension geometry and handling Factory precision molding for perfect fitment Direct replacement part for easy installation Compatibility: XRAY XB2 (All variants using LSM geometry) Includes: (1) Front Lower Left Suspension Arm – Hard

Read more less

The XRAY XB2 Hard Front Suspension Arm (Right, Short, Low Shock Mounting) is made from a stiffer hard composite material for maximum durability and consistent handling. The short design sharpens steering response, while the low shock mounting (LSM) improves cornering stability on high-traction surfaces. Features: Hard composite material for long life and maximum consistency Short arm design for sharper steering and improved agility Low shock mounting (LSM) for added stability in corners Precision-molded factory replacement part Compatibility: XRAY XB2 (all versions, right side front lower short arm)

Read more less

The XRAY XB2 Hard Composite Front Suspension Arm (Right, Lower, Low Shock Mounting) is molded from specially-formulated hard composite material for maximum durability and precise handling. The low shock mounting design lowers the shock position for a more stable setup and improved cornering performance, especially on high-traction tracks. Features: Hard composite material for maximum stiffness and durability Low shock mounting for enhanced stability and cornering Precision-molded for perfect fit and geometry Factory replacement XRAY part Compatibility: XRAY XB2 (all versions, right side front lower arm)

Read more less

Upgrade your steering precision with the XRAY Composite Servo Shim Set. Designed to perfectly space and align your servo, these durable composite shims help reduce stress on linkages and ensure smooth, consistent steering response. Features: Set includes 4 composite servo shims Provides proper servo height and alignment Reduces wear on steering components Lightweight yet durable composite material Easy direct installation Compatibility: Fits all XRAY 1/10 and 1/8 platforms where servo spacing adjustments are required  

Read more less

🛞 Smooth, Precise Steering ControlThe Team Associated RC10B84 Steering Bellcranks are a direct replacement set designed to restore or upgrade your buggy’s steering system. Built from durable composite material, these bellcranks provide consistent, slop-free steering response to keep your B84 handling sharp on the track. 🔧 Features: ✅ Genuine Team Associated replacement part for the RC10B84 ✅ High-strength molded construction for long-lasting durability ✅ Maintains precise steering geometry and smooth movement ✅ Easy installation — direct fit to stock components 📦 Includes: (1) Set of RC10B84 Steering Bellcranks      

Read more less

Team Associated RC10B84 Rear Gearbox – ASC92511 ⚙️ Durable Rear Drivetrain HousingThe Team Associated RC10B84 Rear Gearbox is a genuine replacement part designed to restore strength and precision to your buggy’s drivetrain. Molded from high-quality composite material, this housing keeps your differential, gears, and driveshafts properly aligned under the toughest racing conditions. 🔧 Features: ✅ Direct fit replacement for RC10B84 ✅ High-strength molded composite construction ✅ Maintains gear alignment and drivetrain efficiency ✅ Essential for restoring performance after wear or crash damage 📦 Includes: (1) Rear Gearbox Housing  

Read more less

⚡ Secure Power TransferThe Team Associated RC10B84 Motor Mount is a precision-engineered replacement part designed to keep your motor solidly in place while maintaining exact gear mesh and drivetrain alignment. Built for the rigors of high-performance racing, this mount ensures your buggy runs smooth, efficient, and consistent on the track. ⚙️ Features: ✅ Direct fit for the RC10B84 ✅ CNC-machined aluminum for strength and durability ✅ Provides accurate motor positioning and gear mesh ✅ Race-proven Factory Team quality and finish 📦 Includes: (1) RC10B84 Motor Mount    

Read more less

🏁 Precision Factory FitThe RC10B84 Center Bulkhead (DSC) is a genuine replacement part designed for the Direct Spool Configuration. It provides the secure mounting point for the center drivetrain components, ensuring reliable alignment and smooth power transfer through demanding race conditions. ⚙️ Features: ✅ Direct replacement for the RC10B84 (DSC configuration) ✅ Maintains precise drivetrain geometry and alignment ✅ Built from high-quality, durable materials ✅ Designed for competitive performance and long-lasting strength 📦 Includes: (1) RC10B84 Center Bulkhead (DSC) 💡 Pro Tip: Use alongside the ASC92530 Center Bulkhead Brace (DSC) for maximum rigidity and drivetrain stability.        

Read more less