If you’re racing your Team Associated B7 on high-bite surfaces like carpet or turf, this is one of those upgrades that instantly makes sense once you try it. The Avid -2° HD C Arm Mount widens the C pivot block to properly reduce rear toe — without narrowing your track width. The result? A freer car in the corners and more predictable landings off sideways jumps and corner tabletops. 🔧 What It Does Normally, to reduce rear toe on carpet, you narrow the pills in the D mount — which decreases track width and increases side bite. That can make the car edgy. Avid solves this by: Widening the C mount Starting you at 1° rear toe with centered pills Maintaining full track width Removing 2° of rear toe properly The difference in handling is noticeable immediately. 🏁 On-Track Benefits Frees the car up in high-grip conditions More rotation in tight corners Better stability when landing sideways Maintains proper rear geometry Keeps track width intact Perfect for carpet and turf racing where fine-tuned rear grip balance is critical. 💪 HD Construction This isn’t just geometry — it’s strength too. HD version adds material to the sides Pill cutouts removed for improved impact resistance Machined from 7075-T6 aluminum Anodized black with silver chamfer highlights Laser-etched Avid logo and -2° marking for easy identification 🔧 Fitment Team Associated B7 If you're chasing that perfect carpet/turf balance and want the rear end freed up without sacrificing stability, this mount is a must-have tuning piece.

Read more less

Upgrade your rear suspension with genuine Factory Team Carbon Rear Suspension Arms for the RC10T7 and RC10SC7 platforms. Designed for racers who demand precision and consistency, these arms increase rigidity and reduce flex under high-load conditions, giving you a more predictable and controlled feel on the track. Built using AE’s legendary carbon composite material, they offer the perfect balance of strength, durability, and lightweight performance — exactly what competitive racing requires. Features Factory Team performance upgrade Constructed from AE carbon composite material Increased rigidity over stock arms Reduces flex under hard cornering and acceleration Enhances durability and structural integrity Improves overall handling consistency Includes (2) Rear Factory Team Carbon Suspension Arms Designed specifically for: RC10T7 RC10SC7 A race-proven upgrade that delivers stronger, more consistent rear-end performance when it matters most. 🏁  

Read more less

More punch. More durability. More tuning freedom. The Exotek TLR 22X Locked Spur Mount Set is a high-performance upgrade designed to reduce rotating mass while increasing drivetrain strength and responsiveness. Precision-machined from lightweight aluminum and paired with a durable titanium center bolt, this setup delivers quicker acceleration and improved throttle response — exactly what stock class racers demand. This mount allows you to easily switch between a locked spur configuration or a slipper setup, giving you instant adaptability to match track conditions. Whether you’re looking for maximum forward drive on high-bite carpet or tuning consistency on clay, this system provides the flexibility to dial in your drivetrain. Fully compatible with Exotek and Kimbrough spur gears, it mounts directly to the stock 22X top shaft for a seamless installation. Features: Lightweight aluminum construction Durable titanium center bolt Reduces rotating mass for improved acceleration Allows quick conversion between locked spur and slipper Compatible with Exotek and Kimbrough spur gears Direct mount to stock 22X top shaft Designed for competitive 22X racing Includes: (1) TLR 22X Locked Spur Mount Set w/Titanium Bolt Built for racers who want sharper throttle response, increased drivetrain durability, and the flexibility to adapt to any surface.  

Read more less

Dial in sharper handling and increased chassis rigidity with the Team Losi Racing 22X Stiffezel Side Guards. Designed for competitive racers, these upgraded side guards offer increased stiffness over stock components, improving precision and stability on high-bite surfaces. Constructed from TLR’s Stiffezel material, these guards reduce chassis flex, delivering more direct suspension response and improved consistency through high-speed corners. The added rigidity helps the car stay planted and predictable, especially on high-traction tracks where flex control becomes critical. Whether you’re fine-tuning your setup for carpet, clay, or prepared dirt, these side guards offer a proven tuning option to maximize performance. Features: Stiffer and stronger than stock side guards Reduces chassis flex for improved precision Enhances suspension response and consistency Improves control in high-speed turns Optimized for high-bite and traction-heavy surfaces Direct fit for 22X platforms Includes: (2) 22X Stiffezel Side Guards Built for racers who want sharper steering response, increased stability, and a more locked-in feel on demanding race surfaces.

Read more less

Upgrade your pit setup with the 1UP Racing Pro Pit Tray Set with Shock Stands Combo—a sleek, all-in-one workspace solution built for racers who demand organization, efficiency, and professional presentation. This complete pit system features precision-machined aluminum construction with a dual satin and gloss black finish for a high-end look. The tray is designed with the perfect depth, smooth filleted corners, and dedicated cutouts for differential outdrives, keeping parts secure and easy to access. Hidden magnets hold body clips in place and securely attach the included on-road and off-road shock stands. Both shock stands feature forged carbon trays and magnetically collapse into the included protective storage box with foam inserts, making transport clean and safe. Features Precision-machined aluminum pit tray Dual satin & gloss black finish Ideal tray depth with smooth filleted corners Hidden magnets for body clip storage Differential outdrive cutouts Includes on-road and off-road shock stands Shock stands magnetically attach to tray Forged carbon shock stand trays Protective storage box with foam insert included Includes (1) Pro Pit Tray (1) Off-Road Shock Stand (1) On-Road Shock Stand (1) Storage Box with Foam Insert A premium pit solution designed to keep your workspace organized, efficient, and race-ready—every time you wrench. 🏁  

Read more less

The 1UP Racing TLR 22X-4 Chassis Protector Sheet is a simple and effective way to protect your chassis from wear while adding a clean carbon fiber look to your build. Pre-cut specifically for the TLR 22X-4 buggy, this sheet is ready to apply right out of the package. Made from thick, durable vinyl and paired with an extremely tacky adhesive, this chassis protector can be peeled off and re-applied up to 7–8 times, making it both long-lasting and reusable. Features Pre-cut to fit TLR 22X-4 Thick, durable vinyl construction Carbon fiber style appearance Extremely tacky adhesive Reusable up to 7–8 applications Protects chassis from wear and abrasion Includes (1) TLR 22X-4 Reusable Chassis Protector Sheet Fitment TLR 22X-4 A clean, reusable chassis protection solution built for racers who want durability without sacrificing style. 🏁

Read more less

The Team Associated 92516 RC10B7 Rear Suspension Arms (81mm) are an optional geometry upgrade compared to the standard 78mm rear arms. While 78mm arms are the direct replacement, these 81mm arms are designed for racers looking to experiment with rear suspension geometry, stability, and tuning options. ⚠️ IMPORTANT – NOT A DIRECT BOLT-ONThese 81mm arms require additional parts to install correctly. This is not a simple swap, and is recommended for racers comfortable with setup changes. What’s Different vs 78mm Arms Longer 81mm arm length Changes rear geometry and axle position Results in a 1mm total rear width difference Requires different rear hub offset and drivetrain parts Required Parts for 81mm Conversion To run these arms properly, the following parts are required (per Team Associated supplement): RC10B7 Rear Hub Set, -4mm Offset (P/N 92518) HD CVA Bones, 71mm (P/N 92549) B74 CVA Axle, 66mm (P/N 92207) 1mm Wider Hex 1 Higher Axle Height Setting Features Genuine Team Associated option part Durable molded composite construction Designed for RC10B7 platform Allows advanced rear suspension tuning Compatibility RC10B7 with required supporting components Who This Is For Racers tuning rear grip and stability Builders experimenting with alternative geometry Not recommended as a basic replacement arm 🏁 Pro Tip: Make sure all required parts are installed together to maintain correct drivetrain alignment and handling.

Read more less

Tune rear traction and balance with the Team Losi Racing 13mm Rear Springs (Green, 2.22lb). This spring rate provides increased rear compliance for improved grip and stability, especially on low-to-medium-grip surfaces or during corner exit transitions. Manufactured to Team Losi Racing standards, these springs offer consistent performance and repeatable setup changes, making them ideal for racers refining their suspension for specific track conditions. Features: 13mm rear shock springs Green color code for easy identification 2.22lb spring rate for enhanced rear grip Precision wound for consistent performance Ideal for fine suspension tuning Includes: (2) Rear Shock Springs Compatibility: Team Losi Racing 22X platforms Part Number: TLR-1190

Read more less

Team Losi Racing CVA Driveshaft Bones X69mm (2) 22X TLR232138 Improve drivetrain strength and suspension articulation with the Team Losi Racing CVA Driveshaft Bones, engineered for the 22X platform. These 69mm constant-velocity axle driveshaft bones provide smooth power transfer through suspension travel while helping reduce binding and drivetrain stress. Precision-manufactured to Team Losi Racing standards, these CVA bones are ideal for upgrading or replacing worn components to maintain responsive handling and consistent performance under race conditions. Features: Constant-velocity axle driveshaft bones 69mm length for proper fit on 22X Helps improve drivetrain articulation and reduce binding Precision-manufactured for smooth power transfer Durable construction for race use Compatibility: Team Losi Racing 22X Includes: (2) CVA Driveshaft Bones Part Number: TLR232138  

Read more less

Restore smooth drivetrain operation with the Team Losi Racing VHA V2 Axles Rebuild Set for the 22X platform. This replacement rebuild kit is designed specifically for vehicles equipped with VHA V2 axles, making it easy to refresh worn components and maintain consistent performance on the track. Ideal for routine maintenance or race-day prep, this set helps ensure proper axle function, reduced play, and reliable power delivery. Features: Genuine Team Losi Racing replacement parts Designed for VHA V2 axle assemblies Restores smooth operation and durability Helps maintain consistent drivetrain performance Easy rebuild solution for routine maintenance Includes: (2) Barrel Coupler Bushings (2) Axle Pins Compatibility: Team Losi Racing 22X Team Losi Racing 22X-T

Read more less

Dial in rear grip and balance with the Team Losi Racing Rear Springs Red 1.87lb. Designed for precise suspension tuning, these softer 13mm springs are ideal for low-to-medium grip conditions where increased rear traction and compliance are critical. Color-coded for quick identification and manufactured to Team Losi Racing’s exact specifications, these springs deliver consistent rates and repeatable performance for serious racers. Features: Red color-coded springs for easy identification 1.87lb spring rate for increased rear grip and compliance 13mm diameter for 22X shock compatibility Consistent spring tension for repeatable setup changes Precision manufactured for race-level performance Includes: (2) Rear Shock Springs Compatibility: Team Losi Racing 22X platform

Read more less

Increase strength and tuning precision with the Team Losi Racing HD Turnbuckle Kit, designed specifically for the 22X platform. These heavy-duty turnbuckles provide improved durability over stock components while allowing fast, accurate suspension and steering adjustments at the track. Perfect for racers looking to reduce flex, improve consistency, and maintain precise alignment through hard racing conditions. Features: Heavy-duty construction for increased strength Improves durability and resistance to bending Allows quick camber and toe adjustments Designed for consistent race performance Compatibility: Team Losi Racing 22X platforms Includes: HD Turnbuckle Set Part Number: TLR-1114

Read more less

Upgrade durability and precision with the Team Losi Racing Aluminum Front Axles, engineered specifically for the 22X platform. Machined from lightweight aluminum, these front axles deliver improved strength and consistency while maintaining smooth drivetrain operation under race conditions. Ideal as a performance upgrade or direct replacement, these axles help ensure reliable steering response and long-term durability on high-grip or demanding tracks. Features: Precision-machined aluminum construction Lightweight and durable design Improves front-end strength and reliability Smooth, consistent drivetrain operation Compatibility: Team Losi Racing 22X platforms Includes: (2) Aluminum Front Axles Part Number: TLR-1156

Read more less

Fine-tune front suspension feel and steering response with the Team Losi Racing 13mm Front Springs. Rated at 3.56lb, these red springs provide a balanced option for drivers looking to increase front-end support while maintaining smooth, predictable handling. Designed specifically for TLR 13mm shocks, these precision-wound springs deliver consistent rate accuracy and repeatable performance, making them ideal for dialing in grip and steering on a variety of track conditions. Features: Precision spring rate for consistent performance 3.56lb rate offers balanced front-end support Designed for 13mm TLR shock systems Ideal for tuning steering response and front grip Factory color-coded for quick identification Includes: (2) Front Springs Spring Rate: 3.56lbDiameter: 13mmColor: Red

Read more less

Fine-tune your steering geometry with the Team Losi Racing Narrow “A” Steering Arm, designed specifically for the 22X platform. This narrow steering arm provides precise steering response and is ideal for drivers looking to adjust Ackermann and steering feel to match track conditions. Precision molded for strength and accuracy, this part is perfect for replacements, rebuilds, or setup tuning on race day. Features: Narrow “A” steering arm configuration Precision-molded for accurate geometry Helps fine-tune steering response and feel Durable construction for race use Compatibility: Team Losi Racing 22X platforms Includes: (1) Narrow Steering Arm A Part Number: TLR-1089

Read more less

Upgrade or replace your steering hardware with the XRAY Composite Extended Steering Servo Arm Set. Designed for precision and durability, these servo arms provide a secure fit and consistent steering response for XRAY competition platforms. Manufactured from high-quality composite material, each arm is precision machined for accurate spline engagement and easy installation right out of the package. Features & Benefits: High-quality composite construction for strength and durability Extended design for precise steering geometry Precision machined for accurate spline fit Easy installation with consistent steering performance Compatibility: XRAY XB4 XRAY XT2 1/10 Dirt & Carpet Competition Buggy and Stadium Truck platforms Includes: (1) 23T servo arm (1) 25T servo arm A clean, reliable replacement set to keep your XRAY steering system tight and responsive on any surface.    

Read more less

Maintain precise front suspension geometry with the XRAY Composite Front Lower Arm Mount. This genuine replacement part is designed for the 2024 XB2 and XT2 platforms, making it ideal for repairs, rebuilds, or keeping critical spares on hand. Features & Benefits: Composite construction for strength, durability, and controlled flex Precision molded for accurate fit and consistent suspension alignment Direct replacement for kit-supplied front lower arm mount Compatibility: XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XT2 2024 Carpet XRAY XT2 2024 Dirt Includes: (1) Composite front lower arm mount A must-have replacement to keep your XRAY suspension dialed and race-ready.    

Read more less

Secure your batteries with confidence using the Powerhobby 25×450mm Battery Straps. Designed for strength and reliability, these straps keep your packs firmly in place during hard acceleration, jumps, and rough landings. Features & Benefits: Durable hook-and-loop design for a secure hold 25mm width x 450mm length fits a wide range of battery sizes Helps prevent battery movement during high-impact driving Ideal for racing, bashing, and high-power setups Includes: Battery strap(s) (25×450mm) A simple but essential upgrade to keep your battery locked in and your electronics protected.  

Read more less

Small in size but big on performance, the SkyRC B6 Neo delivers serious charging power in an ultra-portable design. With up to 200W DC output and USB-C PD support, this smart charger is built for hobbyists who want flexibility, speed, and safety—whether at the track or on the bench. Designed to handle a wide range of battery chemistries, the B6 Neo also doubles as a compact power supply, making it a versatile tool for modern RC setups. Features & Benefits 200W DC charging power with up to 10A output USB-C PD dual input delivers up to 80W for added flexibility Ultra-compact design—approximately ¼ the size of previous models XT60 DC input and modern Type-C PD input Built-in balance port enables faster, more efficient discharging Up to 24W discharge when using balance port + main port Comprehensive safety protections for reliable, secure charging Clean, modern design with a durable plastic housing Performance Highlights High-power charging in a pocket-sized footprint Efficient battery management across multiple chemistries Ideal for racers, bashers, and bench setups needing portable power Includes (1) SkyRC B6 Neo 200W Smart Charger A compact, high-output charger designed for today’s RC demands—powerful, portable, and built with safety in mind.  

Read more less

Fine-tune your suspension and lower the center of gravity with the Team Losi Racing 22X Carbon Fiber Front Shock Tower (-2mm). This optional tuning part is designed for racers looking to adjust front-end response and handling on the 22X 2WD buggy platform. Features & Benefits: Optional -2mm shock tower lowers front shock mounting points Carbon fiber construction for lightweight strength and rigidity Helps fine-tune suspension geometry and handling characteristics Precision cut for accurate fit and consistent performance Compatibility: Team Losi Racing 22X 2WD Buggy Includes: (1) -2mm Carbon Fiber Front Shock Tower A great tuning option for racers looking to dial in front-end feel and suspension performance on their 22X.    

Read more less

Upgrade durability and front suspension strength with these Powerhobby aluminum front upper arms. CNC-machined from aluminum and anodized for a clean finish, these arms are a direct replacement for the stock components and help reduce flex during hard driving. Features: CNC-machined aluminum construction Increased strength over stock plastic arms Precision fit for consistent suspension geometry Available in Red, Black, or Blue anodized finishes Fits: Arrma 1:18 Mojave Grom Losi 1:12 AWD NASCAR Part Number: PHB6846 Ideal for racers and bashers looking to improve durability while adding a custom look to their NASCAR or Grom platform.  

Read more less

The ProTek RC Braided Brushless Motor Sensor Cable is a premium replacement sensor wire designed for sensor-based brushless motor systems that use removable sensor harnesses. Built for reliability and durability, this cable ensures clean, consistent signal transfer between your ESC and motor—race after race. Why You’ll Want It This cable uses individual silicone-shielded sensor wires wrapped in a black braided nylon sleeve, giving it excellent flexibility while protecting against abrasion, vibration, and shock. Shrink-wrapped ends keep everything secure and tidy, making it ideal for high-performance racing environments where reliability matters most. Features Compatible with most sensor-based brushless ESC & motor systems Individual silicone-shielded sensor wires for flexibility Braided nylon outer sheath for abrasion and impact protection Shrink-wrapped ends for durability and clean routing Smooth, reliable data transfer between ESC and motor Lightweight and race-proven design Specifications Length: 90mm Part Number: PTK-2107 Type: Brushless Motor Sensor Cable Wire Protection: Braided nylon sleeve with silicone-shielded internal wires Perfect for racers looking to replace a worn sensor wire or upgrade to a more durable, track-ready option that won’t hold your electronics back.

Read more less

The XPT3 LCG Transmission from Reefs RC is a purpose-built, ultra-compact drivetrain upgrade engineered for competitive 1/10 crawlers. Weighing in at just 75 grams, the XPT3 delivers a true low-CG advantage without sacrificing strength or reliability. Designed with a machined aluminum case, hardened steel gears, and titanium output shafts, this transmission is built to take abuse while maintaining smooth, precise power delivery. The forward motor mounting improves balance and packaging, while 48-pitch gearing and an easy-set gear mesh with protective cover keep performance consistent even in harsh trail conditions. Whether you’re running straight axles or portals, the XPT3 offers flexible gearing options to dial in the perfect final drive for your setup—making it a serious upgrade for high-end crawler builds. 🔧 Features Ultra-lightweight design — only 75g Compact low-profile (LCG) transmission layout CNC-machined aluminum case for durability Hardened steel gears for long service life Titanium output shafts for maximum strength Forward motor mounting for improved balance Smooth-running 48-pitch gears Easy gear-mesh setup with debris-blocking cover 📐 Specifications Weight: 75g Pinion Range: 11T–20T (48p) Transmission Ratio: 6.75:1 – 12.27:1 Final Drive Ratios (FDR): Straight Axle: 25.31:1 – 46.02:1 Axial Portal Axle: 48.52:1 – 88.21:1 Vanquish F10 Portal Axle: 35.44:1 – 64.43:1 📦 Includes (1) Reefs RC XPT3 LCG Transmission (Silver) ⚠️ Pinion Recommendation Straight axles: 11T Portal axles: 14T(May vary depending on rig setup and motor choice) ✅ Compatibility Axial SCX10 II Axial SCX10 III Vanquish Products VRD Vanquish Products VS4-10 A premium transmission built for serious crawlers—lightweight, strong, and engineered to win.

Read more less

The RC10B7 Gear Differential Cap is a genuine replacement part from Team Associated, designed to restore proper function and durability to your RC10B7 gear differential. Precision-molded for a perfect factory fit, this cap helps ensure consistent diff performance and reliability during racing or practice. Ideal for routine maintenance, rebuilds, or replacing worn or damaged components, it installs quickly with no modifications required. Features: Genuine Team Associated replacement part Precision fit for RC10B7 gear differentials Maintains proper differential operation and durability Direct drop-in installation Includes: (1) Gear Differential Cap Compatibility: Team Associated RC10B7 1/10 Buggy  

Read more less

  The Hobbywing 1/10 ESC Switch is a direct replacement for a wide range of Hobbywing electronic speed controls that use a slider-style on/off switch. If your original switch becomes worn, damaged, or unreliable, this replacement restores proper operation with a factory-fit feel. Compatible with popular ESCs such as the Justock, XeRun 120A V2.1, QuicRun 10BL60-Sensored, and other Hobbywing 1/10 ESCs using this same switch format. Features Genuine Hobbywing replacement part Restores reliable on/off control Slider-style switch for smooth operation Compatible with multiple Hobbywing 1/10 ESC models Easy plug-in installation Compatibility Justock ESC XeRun 120A V2.1 QuicRun 10BL60-Sensored Other Hobbywing 1/10 ESCs equipped with a slider switch

Read more less

Dial in your setup with absolute confidence! The 1UP Racing Pro Pit Scale delivers ultra-fine accuracy, making it the perfect tool for weighing parts, tires, diffs, hardware, and more. Whether you're chasing consistency, balancing components, or fine-tuning for race day, this compact powerhouse gives you the precision trusted by top-level racers. Engineered with a 0.01g resolution, 500g capacity, and a crisp blue backlit LCD, the Pro Pit Scale is built for serious tuning in any pit environment. A stainless steel weighing platform, laser-etched branding, and a protective cover complete the professional-grade feel. Key Features: ✔️ 0.01g Precision – High-resolution measurement for pro-level tuning✔️ 500g Capacity – Perfect for tires, diffs, hardware, and small components✔️ Stainless Steel Platform – Durable, stable, and easy to clean✔️ Blue Backlit LCD – Clear visibility in any lighting✔️ Laser-Etched 1UP Logos – Clean, premium aesthetic✔️ 9 Weighing Modes – Versatile for all hobby and workshop uses✔️ Full-Capacity Tare Range – Zero out trays or containers instantly✔️ Protective Cover & Parts Tray Included – Ready for pit bench or travel Includes: (1) 1UP Racing Pro Pit Scale (2) AA Batteries (1) Protective Cover / Parts Tray Specifications: Capacity: 500g (17.637oz) Resolution: 0.01g (0.00035oz) Overall Size: 5 × 4.17 × 0.74 in (127 × 106 × 19mm) Platform Size: 3.93 × 3.93 in (100 × 100mm)

Read more less

The 1RC Racing 1/18 Servo Extension Wire is a direct replacement part designed for the 1RC Racing 1/18 chassis lineup. Perfect for extending servo reach or cleanly routing wires through your setup, this high-quality extension ensures a secure, low-resistance connection between components. ⚙️ Features: Genuine 1RC Racing replacement part 100mm length for flexible installation Durable, high-quality wire construction for reliable signal transfer Ideal for clean wire management on your 1/18 scale setup 📦 Includes: (1) 1RC Racing 1/18 Servo Extension Wire (100mm)  

Read more less

Smoother Rotation. Faster Corner Speed. Upgrade your XRAY X4 with the 58mm ECS BB Drive Shaft Set, engineered for maximum efficiency and precision handling. Featuring a ball-bearing inner assembly, this advanced driveshaft dramatically reduces friction for smoother steering response and improved corner speed — giving you the ultimate edge on the track. Precision Engineering by XRAY Built for professional performance, the ECS BB (Ball-Bearing) design minimizes joint wear, delivers more consistent power transfer, and enhances overall drivetrain smoothness. Ideal for competitive touring racers seeking razor-sharp control and acceleration through every turn. Features: Ball-bearing inner assembly for ultra-smooth rotation Reduces friction for faster cornering and improved stability Increases drivetrain efficiency and steering precision Durable, high-quality materials for long-lasting performance Genuine XRAY Factory Team upgrade Includes: (1) 58mm ECS BB Drive Shaft Set (unassembled) Note: Must be used with XRAY Gear Differential BB CVD Outdrives (XRA304972) – sold separately Compatibility: XRAY X4 XRAY — The Art of Performance.    

Read more less

Overview:Upgrade your touring car with the ultimate combination of lightweight performance and precision engineering. The 1UP Racing Pro Duty Titanium Lower Shock Screws are built for racers who demand strength, accuracy, and efficiency on every lap. CNC-machined from aerospace-grade titanium, these screws eliminate unnecessary unsprung weight while providing unmatched reliability and alignment accuracy for your shocks. About the Pro Duty Titanium Lower Shock Screws Titanium Strength AdvantagePrecision-machined from 6AL4V Grade 5 titanium, each screw delivers exceptional strength and corrosion resistance at a fraction of the weight of steel. The LH (left-hand) threads ensure the screws stay locked in place, even through long mains and rough track conditions. A thin integrated flange keeps the shock eye perfectly centered, while a deep 1.5 mm hex ensures consistent torque and tool engagement over countless installs. Designed specifically for plastic or composite suspension arms, these Pro Duty screws are race-proven and trusted by top-level drivers for their consistent feel and superior longevity. Features Ultra-lightweight — just 0.93 g per set of four Aerospace-grade 6AL4V (Grade 5) titanium construction CNC-machined for perfect precision Left-hand threads prevent loosening under load Built-in flange keeps shocks centered Deep 1.5 mm hex resists rounding Stronger, lighter, and more durable than steel hardware Compatible with most 1/10-scale touring cars Includes (4) Pro Duty Titanium 1/10 On-Road Lower Shock Screws Team Associated RC10 B6.4D Includes: (1) Complete Titanium Upper Screw Set (for RC10 B6.4/B6.4D)  

Read more less

Durable factory replacement for the XB2 1/10 Buggy Overview:The XRAY XB2 Hard Graphite Composite Rear Suspension Arm delivers race-proven durability and precision handling for your XB2 1/10 buggy. Manufactured from XRAY’s exclusive hard graphite-reinforced composite, this arm provides the perfect balance of stiffness and flex—ideal for high-traction surfaces and competitive racing. About the Rear Suspension ArmThis left-side rear arm features XRAY’s signature design for smooth suspension movement and maximum impact strength. The hard graphite material improves cornering consistency and reduces flex under load, providing a more responsive feel and better traction balance across a range of track conditions. Features: Genuine XRAY Factory Team part Hard graphite composite for increased stiffness and reduced flex Provides improved steering precision and consistent cornering Ideal for high-grip indoor and outdoor tracks Precision-molded for perfect fit and geometry Lightweight yet highly durable construction Specifications: Part Type Rear Suspension Arm (Left) Material Hard Graphite Composite Vehicle Compatibility XRAY XB2 1/10 2WD Buggy Position Rear – Left Side Includes: (1) Hard Graphite Composite Rear Suspension Arm (Left)

Read more less

Overview:Take your Team Associated TC8’s performance and style to the next level with the 1UP Racing CF1 Carbon Fiber Front Bumper Brace and Body Mount Plate — precision-engineered for strength, rigidity, and race-winning consistency. About the CF1 Bumper Brace & Body Mount PlateDesigned and manufactured in the USA, this premium carbon fiber upgrade provides a durable, lightweight solution that enhances the handling characteristics of your TC8. The dual-level layout mirrors the rear plate for balanced rigidity, while additional body mount locations improve shell fitment and aerodynamics. CNC-machined from top-grade carbon fiber, this plate offers a tight, perfect fit and a confidence-inspiring driving feel — ideal for high-traction track conditions. Features: Made in the USA 🇺🇸 Super lightweight carbon fiber construction One-piece design minimizes chassis flex Dual-level layout matches the rear plate for balance Adds extra body mount locations for improved fitment CNC-machined for precision and easy installation Increases cornering speed and handling stability Designed for high-traction race tracks Includes: (1) CF1 Carbon Fiber Front Bumper Brace & Body Mount Plate

Read more less