Fine-tune your steering geometry with the 4° Caster Blocks from Team Associated. These precision-molded components set the front suspension caster angle, helping you balance steering response, stability, and cornering performance to match track conditions. 🔥 Key Features: 4° caster angle for balanced steering and stability Molded composite construction for durability and precision fit Direct replacement part for worn or damaged caster blocks Designed for race-proven suspension geometry Easy installation with factory hardware ✅ Compatibility: Team Associated TC7 OriginalTeam Associated TC7.1Team Associated TC7.2 📦 Includes: (1) Left Caster Block (4°) (1) Right Caster Block (4°) ⚠️ Tip:Changing caster affects corner entry and straight-line stability—less caster = more steering response, more caster = better stability.

Read more less

Maintain precise axle spacing and bearing alignment with these 5.6mm Axle Crush Tubes from Team Associated. Designed to sit between axle bearings, these tubes help reduce side loading, extend bearing life, and keep your drivetrain running smooth under racing conditions. 🔥 Key Features: Precision 5.6mm length for accurate axle spacing Reduces bearing side load and wear Helps maintain drivetrain efficiency and consistency Machined to Team Associated’s factory specifications Lightweight and durable for competitive applications ✅ Compatibility: Fits multiple Team Associated vehicles requiring 5.6mm axle crush tubes Commonly used in RC10B series and other AE 1/10 vehicles Check your manual for exact placement and fitment 📦 Includes: (4) 5.6mm Axle Crush Tubes ⚠️ Tip:Always replace worn crush tubes when servicing axles or bearings to ensure maximum drivetrain life.

Read more less

Upgrade your RC10B6.3’s drivetrain with the Heavy Duty (HD) Slipper Spring and Adapters from Team Associated. Engineered for improved durability and consistent slipper performance, this set is ideal for racers pushing their vehicles to the limit on high-traction surfaces. 🔥 Key Features: Heavy duty slipper spring for increased pressure and durability Includes updated slipper adapters for optimized fit and function Designed for smoother and more consistent slipper operation Direct replacement for the stock B6.3 slipper components ✅ Compatibility: RC10B6.3 RC10B6.3D May also fit other RC10B6-series models with similar slipper configurations 📦 Includes: (1) HD Slipper Spring (2) Slipper Adapters ⚠️ Note:Ensure proper slipper assembly for optimal performance. Refer to your vehicle’s manual for installation instructions.

Read more less

Fine-tune your drivetrain or suspension with precision using these Team Associated 5.1x8.0x0.20mm shims. Whether you're adjusting spacing, reducing play, or dialing in alignment, these thin profile shims provide the subtle tweaks that matter in competitive setups. 📏 Specifications: Inner Diameter: 5.1mm Outer Diameter: 8.0mm Thickness: 0.20mm Material: Steel Quantity: (Check product packaging—typically sold in packs) 🛠️ Common Uses: Differential spacing Suspension tuning Slop removal on pivot points or shafts ✅ Compatibility: RC10B74 series Universal use for other 5mm shaft applications Essential for racers looking for ultra-fine tuning adjustments. Keep these handy in your pit box!

Read more less

Upgrade or refresh your drivetrain with the RC10B74 Center Differential Set from Team Associated. This high-performance center diff helps balance power delivery between the front and rear, improving cornering, acceleration, and control—especially in high-traction or uneven conditions. 🔧 Key Features: Genuine Factory Team differential assembly Smooth and consistent power transfer Essential for tuning your RC10B74 for various track conditions Helps reduce drivetrain stress under heavy loads 📦 Includes: (1) Complete Center Differential Set(May include gears, outdrives, diff case, internal hardware — verify in manual) ✅ Compatibility: Team Associated RC10B74 Also fits other RC10B74 variants (check your manual for exact fitment) Keep your buggy driving like new with this premium center diff set, built to deliver the precision and durability Team Associated is known for.

Read more less

Upgrade or replace your servo mounting solution with the Team Associated RC10B74.1 Servo Mount. Precision-machined and built to secure your steering servo in place, this factory replacement part ensures solid, reliable performance lap after lap. 📌 Key Features: Direct replacement for the stock servo mount Compatible with RC10B74.1 chassis layout Ensures secure, vibration-free servo positioning Factory Team durability and fitment ✅ Compatibility: RC10B74.1 May also be compatible with other RC10B74-series vehicles depending on configuration This part is essential for maintaining proper steering geometry and performance under race conditions. Keep your servo locked in and dialed.

Read more less

Give your RC10B74.1 the perfect balance of flex and rigidity with the Factory Team Flex Chassis Brace Support Set. Crafted from 2.0mm carbon fiber, this brace set is optimized to allow controlled flex in the chassis for enhanced traction and handling on a variety of track conditions. 📌 Key Features: Factory Team carbon fiber construction 2.0mm thickness provides the ideal flex characteristics Designed to tune chassis response for high-traction or bumpy tracks Lightweight and durable for competitive performance 📦 Includes: (1) Front Flex Chassis Brace Support (1) Rear Flex Chassis Brace Support ✅ Compatibility: RC10B74.1 May also be used on other B74 models with compatible geometry For racers looking to fine-tune handling without sacrificing durability, this Factory Team upgrade is a must-have.

Read more less

Upgrade your RC10B74.1 with the Factory Team Carbon Fiber Chassis Brace Support Set. Precision-cut from 2.0mm carbon fiber, this lightweight and rigid brace support enhances chassis stiffness and tuning capabilities—ideal for racers looking to fine-tune flex characteristics for maximum track performance. 📌 Key Features: Precision CNC-machined carbon fiber construction 2.0mm thick for optimized strength-to-weight ratio Reduces chassis flex for more consistent handling Essential for high-traction racing surfaces 📦 Includes: (1) Front chassis brace support (1) Rear chassis brace support ✅ Compatibility: RC10B74.1 May be used on other B74 variants with matching geometry Built for performance-minded racers chasing precision and durability.

Read more less

Upgrade your RC10B74 series buggy with these Factory Team Carbon Fiber Chassis Braces. Designed for increased stiffness and responsiveness, these lightweight carbon braces enhance durability while delivering consistent performance on high-traction surfaces. 📌 Key Features: Lightweight 2.5mm carbon fiber construction Increases chassis stiffness and rigidity Enhances overall handling precision Direct Factory Team upgrade for stock braces 📦 Includes: (1) Front carbon chassis brace (1) Rear carbon chassis brace ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2 RC10B74.2D A must-have hop-up for serious racers seeking that perfect balance of strength and responsiveness.

Read more less

Upgrade your RC10B74.2 with the Factory Team Top Plate Kit, engineered for improved front-end strength and rigidity. This precision CNC-machined kit enhances durability while maintaining a lightweight design — perfect for serious racers looking to increase performance and chassis tuning options. 📌 Key Features: Factory Team precision fit and finish Provides increased stiffness to the front chassis area Reduces flex in high-load conditions Lightweight, durable construction 📦 Includes: (1) Factory Team top plate (1) Top plate brace Required mounting hardware ✅ Compatibility: RC10B74.2 RC10B74.2D Optimize your front-end stability and keep your steering precise with this must-have tuning upgrade from Team Associated!

Read more less

Upgrade your RC10B74.1 with this Factory Team LTC (Low Torque Capacity) Differential Set, designed to reduce rotational mass and improve acceleration and handling. This set includes both the front and rear differentials, offering a complete solution for racers seeking increased efficiency and improved cornering response. 📌 Key Features: Complete front and rear differential set Lightweight LTC design for reduced rotating mass Enhanced on-power steering and corner exit traction Factory Team components ensure a precise fit and long-term durability 📦 Includes: (2) LTC gear differential assemblies (front & rear) Internal gears and seals pre-installed Ready to fill with your preferred silicone diff fluid ✅ Compatibility: RC10B74.1 RC10B74.1D May also be used with RC10B74.2 platforms as a tuning option

Read more less

Boost chassis rigidity and improve handling response with the Factory Team 2.5mm Carbon Fiber Stiff Chassis Brace Support Set for the RC10B74.2. This upgrade provides enhanced stiffness across the center section of the buggy, helping to reduce unwanted flex and improve overall consistency, especially on high-grip tracks. 📌 Key Features: Precision-machined 2.5mm carbon fiber construction Stiffens chassis flex in key areas Lightweight with high-strength performance Ideal for high-traction surfaces or aggressive driving styles 📦 Includes: (1) Carbon fiber front brace support (1) Carbon fiber rear brace support ✅ Compatibility: Team Associated RC10B74.2 and B74.2D Factory Team tuned fit and finish

Read more less

Upgrade your RC10B74.2 with the Factory Team Decoupled Slipper Shaft Outdrive Set. Designed for use with the decoupled slipper system, this precision-engineered outdrive set provides improved drivetrain durability and smooth power delivery, making it essential for high-level competition and maintenance. 📌 Key Features: Factory Team performance-grade components Designed for decoupled slipper configuration Enhances drivetrain strength and efficiency Precision-machined for accurate fit and finish 📦 Includes: (1) Pair of shaft outdrives (left & right) Hardware required for installation ✅ Compatibility: RC10B74.2 Works in conjunction with the Factory Team decoupled slipper system

Read more less

Keep your drivetrain dialed in with the Factory Team Decoupled Slipper Thrust Bearing Rebuild Set for the RC10B74.2. Designed specifically for the decoupled slipper assembly, this kit includes everything needed to service the thrust bearing for smooth operation and consistent performance on the track. 📌 Key Features: Genuine Team Associated Factory Team part Restores slipper clutch smoothness and reliability Precision components for minimal friction Essential for regular maintenance of decoupled slipper setups 📦 Includes: Complete thrust bearing rebuild components (washers, balls, etc.) Enough to fully service one decoupled slipper thrust bearing assembly ✅ Compatibility: RC10B74.2 with Factory Team Decoupled Slipper System

Read more less

Optimize your drivetrain performance with the Factory Team Decoupled Slipper Hub and Pads for the RC10B74.2. Designed to work with the decoupled slipper system, this upgrade reduces front wheel influence during off-power cornering and braking, providing smoother handling and increased mid-corner stability on high-grip tracks. 📌 Key Features: Factory Team precision upgrade Designed for use with decoupled slipper setups Reduces braking drag and improves off-power steering Helps maintain consistent rear traction High-quality slipper pads included 📦 Includes: (1) Decoupled Slipper Hub (2) Slipper Pads ✅ Compatibility: Team Associated RC10B74.2 May also fit other RC10B74 variants using a decoupled slipper configuration

Read more less

Team Associated RC10B74.2 FT Center Dogbone Blades (Part #92374) Keep your drivetrain running smooth and efficient with the Factory Team Center Dogbone Blades for the RC10B74.2. These precision-machined blades are engineered to reduce friction, minimize wear, and provide consistent performance under extreme racing conditions. A must-have for serious 1/10 4WD racers looking to maintain their competitive edge. 📌 Key Features: Genuine Factory Team upgrade Designed specifically for center dogbones Reduces friction and drivetrain wear Improves longevity and performance Lightweight and durable material 📦 Includes: (4) Center Dogbone Blades ✅ Compatibility: Team Associated RC10B74.2 RC10B74.2D May also fit other B74 variants with center dogbone setup

Read more less

The Team Associated Factory Team Steering Block Arms +2 are a precision upgrade for your RC10B74 series vehicle. With a 2mm longer length than stock, these arms enhance steering geometry for improved handling and tuning options—especially beneficial on high-bite surfaces where extra steering stability is critical. 📌 Key Features: +2mm longer for refined steering geometry Factory Team upgrade for precision fit and durability CNC-machined for consistent performance Ideal for tuning your RC10B74.2 to specific track conditions 📦 Includes: (1) Left Steering Block Arm (+2) (1) Right Steering Block Arm (+2) ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2

Read more less

Upgrade your RC10B74.2 with this official Team Associated Servo Mount Set, specifically designed for use with the decoupled slipper configuration. Precision-engineered for perfect fit and performance, this set ensures secure servo mounting and consistent servo alignment during extreme track action. 🔩 Key Features: Designed for RC10B74.2 vehicles Compatible with decoupled slipper setups Factory Team precision fit and finish Includes both left and right servo mounts 📦 Includes: (1) Left Servo Mount (1) Right Servo Mount ✅ Compatibility: Team Associated RC10B74.2 Vehicles using the decoupled slipper layout

Read more less

Overview:Upgrade your buggy with the Team Associated RC10B84 Factory Team Carbon Side Rails. Made from high-quality carbon fiber, these side rails reduce weight and add rigidity compared to the standard composite rails. The result is a stiffer chassis with improved response, perfect for racers looking to maximize performance on high-traction tracks. Features: Carbon fiber construction for lightweight strength Adds rigidity to the chassis for sharper handling Reduces overall vehicle weight Direct replacement for stock composite side rails Genuine Factory Team performance upgrade Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Set of Factory Team Carbon Side Rails Part Number: 92502 ⚡ Pro Tip: Pair these with the Factory Team Carbon Chassis Braces (92504) for a fully optimized lightweight and rigid chassis setup.

Read more less

Overview:Reinforce your buggy’s backbone with the Team Associated RC10B84 Chassis Braces. Designed to stiffen the chassis and improve durability, these braces help maintain consistent handling by reducing flex under high loads. Whether you’re replacing worn parts or fine-tuning chassis stiffness, this set ensures your B84 stays reliable and race-ready. Features: Complete chassis brace set for the B84 Provides added rigidity and durability Helps maintain consistent handling and driveline alignment Molded composite construction for strength with balanced flex Genuine Team Associated replacement part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Chassis Brace Set (front and rear braces with hardware) Part Number: 92503 ⚡ Pro Tip: Upgrade to the Factory Team Carbon Chassis Braces (92504) for reduced weight and even greater stiffness if you’re racing on high-traction tracks.

Read more less

Overview:Keep your electronics secure and cool with the Team Associated RC10B84 Battery Holder & Fan Mount Set. Designed for the RC10B84, this set provides a lightweight, durable solution to lock your battery firmly in place while also offering a dedicated mount for a cooling fan. Perfect for racers pushing their buggy to the limit, it ensures both stability and reliable cooling during long runs or high-traction racing. Features: Secure, lightweight battery holder designed for the B84 chassis Integrated fan mount to keep electronics running cool Durable construction with precision fit Direct replacement or upgrade for easy installation Genuine Team Associated factory part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Battery Holder (1) Fan Mount Required mounting hardware Part Number: 92505 ⚡ Pro Tip: Pair this set with a 30mm or 40mm high-RPM fan for maximum cooling efficiency during long mains or hot outdoor racing conditions.

Read more less

Overview:Dial in your drivetrain with the Team Associated RC10B84 Differential Height Inserts. These precision-molded inserts allow you to easily adjust the height of the differentials in your B84, fine-tuning traction, handling balance, and driveshaft angles for any track condition. A critical tuning option for racers looking to maximize consistency and performance. Features: Precision-molded inserts for differential height adjustment Fine-tunes traction and balance by changing driveshaft angles Quick and easy to install or swap at the track Durable and lightweight construction Genuine Team Associated tuning accessory Compatibility: Team Associated RC10B84 1/10 4WD Buggy (front and rear differentials) Includes: (1) Set of Differential Height Inserts (various heights) Part Number: 92513 ⚡ Pro Tip: Use a lower diff height for improved stability and traction on bumpy or low-grip tracks, and a higher diff height for increased corner speed and sharper handling on high-grip surfaces.  

Read more less

Overview:Boost performance and durability with the Team Associated RC10B84 Factory Team Carbon Front Suspension Arms. Constructed from carbon composite material, these arms provide increased stiffness and reduced flex compared to standard arms—delivering sharper steering response, improved cornering consistency, and the durability needed for high-level racing. Features: Carbon composite construction for added stiffness and strength Reduces flex for more consistent suspension geometry Improves steering precision and cornering stability Lightweight design helps lower overall vehicle weight Genuine Factory Team upgrade part Compatibility: Team Associated RC10B84 1/10 4WD Buggy (Front suspension) Includes: (1) Set of Carbon Front Suspension Arms Part Number: 92515 ⚡ Pro Tip: Pair these with the Factory Team carbon rear arms (92516) for a fully upgraded suspension setup that maximizes handling precision on high-traction tracks.  

Read more less

Overview:Fine-tune your buggy’s steering geometry with the Team Associated RC10B84 Caster Inserts. These precision-molded inserts allow racers to adjust caster angle quickly and easily, giving you the flexibility to dial in steering response and stability for any track condition. A must-have tuning option for serious B84 racers. Features: Precision-molded caster adjustment inserts Allows quick and accurate caster angle changes Improves steering response and stability based on track surface Lightweight and durable construction Genuine Team Associated tuning part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Set of Caster Inserts (various angles) Part Number: 92522 ⚡ Pro Tip: Use less caster (lower angle) for quicker steering response on high-traction tracks, and more caster (higher angle) for improved straight-line stability on rough or low-traction surfaces.

Read more less

Overview:Maintain precise steering response with the Team Associated RC10B84 Steering Links & Pivot Ball Sockets. Designed as genuine factory replacements, these parts restore proper geometry and eliminate unwanted slop when your originals show signs of wear. Perfect for racers who demand consistent handling and durability from their B84. Features: Complete set of steering links and pivot ball sockets Molded to factory specs for perfect fitment Durable construction withstands the demands of racing Direct replacement for worn or damaged parts Genuine Team Associated replacement part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (2) Steering Links (4) Pivot Ball Sockets Part Number: 92523 ⚡ Pro Tip: Combine these with the RC10B84 turnbuckle set (92558) for a fully refreshed and precise steering assembly.

Read more less

Overview:The Team Associated RC10B84 Arm Mount D is a precision-machined suspension mount designed for the rear end of the B84. Built to deliver strength and accuracy, this mount ensures the suspension arms stay properly aligned under extreme racing conditions. Whether you’re replacing a worn part or fine-tuning your setup, the Arm Mount D provides a reliable foundation for consistent handling and durability. Features: CNC-machined for precise hinge pin alignment Adds strength and rigidity to the rear suspension assembly Durable construction for long-lasting performance Genuine Team Associated factory replacement/upgrade part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Arm Mount D Part Number: 92540 ⚡ Pro Tip: Pair the Arm Mount D with the Arm Mount Backing Plate (92541) for maximum suspension durability and consistent geometry under heavy loads.

Read more less

Overview:The Team Associated RC10B84 Arm Mount Backing Plate is a precision-machined component designed to reinforce the suspension arm mounts on your buggy. By adding strength and stability to the rear suspension assembly, this backing plate helps maintain precise alignment under high loads, ensuring consistent handling and durability during hard racing conditions. Features: Strengthens and supports the suspension arm mount assembly Maintains proper alignment under heavy loads and impacts Machined for a perfect fit with the RC10B84 chassis Genuine Team Associated Factory Team part for race-proven reliability Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Arm Mount Backing Plate Part Number: 92541 ⚡ Pro Tip: Use this backing plate with the B84 aluminum arm mounts for maximum suspension rigidity and improved cornering consistency.

Read more less

1up Racing Curved Glue Tips feature a steel tip which is easy to unclog for extended use. A single tip can last the life of a bottle of glue! Universal fit. For use with thin viscosity CA glue. Package includes ten tips.

Read more less

Overview:Introducing the 1up Racing 7075 Aluminum Locknuts (M3) – the ultimate combination of strength, style, and lightweight performance. Precision-crafted from high-quality 7075 aluminum, these locknuts deliver the durability you need while saving weight where it counts. Each nut features a tight-fitting nylon insert that locks in place to keep everything secure, even under extreme R/C racing conditions. Choose from 10 bold anodized colors to match your build’s style and make your ride stand out! Features: Includes 8 locknuts per package Premium 7075 aluminum construction for strength and lightweight performance 5.5mm outer hex for easy installation M3 x 0.5mm threads (fits standard M3 hardware) Nylon lock inserts prevent loosening over time Available in 10 stunning anodized finishes for maximum style Compatibility: Fits most 1/10 and 1/8 scale R/C applications requiring M3 locknuts Perfect for off-road buggies, stadium trucks, touring cars, crawlers, drones, and more

Read more less

Fine-tune your XB2/XB4’s front suspension geometry with the precision-machined XRAY Aluminum Front Lower Arm Mount. Crafted from premium Swiss 7075 T6 aluminum, this mount allows for +3° or -3° arm sweep adjustment, giving racers the flexibility to dial in steering response and overall handling balance. Features: CNC-machined from high-grade Swiss 7075 T6 aluminum for maximum strength and durability Provides +3° or -3° adjustment to fine-tune suspension setup Anodized finish for wear resistance and factory look Precision design ensures a perfect fit with XRAY chassis components Improves handling versatility on varying track conditions Compatibility: XRAY XB2 – 1/10 2WD Buggy (all versions, check manual for exact fit) XRAY XT2 – 1/10 2WD Stadium Truck (all versions, check manual for exact fit) May also fit XB4 platforms depending on configuration (verify with manual) Part Number: 322317

Read more less

Upgrade your drivetrain with the XRAY Composite Adjustment Ball-Bearing Hubs. Engineered for precision and durability, these hubs provide smoother rotation, reduced friction, and consistent performance under high-stress racing conditions. Features: Strong composite construction for lightweight durability Precision ball-bearing design for smoother drivetrain performance Helps reduce slop and improve efficiency Easy installation and long-lasting reliability Includes: (2) Composite Adjustment Ball-Bearing Hubs Compatibility: Fits XRAY XB2 / XT2 / XB4 platforms (check manual for specific fitment)

Read more less

Upgrade your XB2 with the XRAY Carbon Rear Shock Tower (4-Dots) for precision handling and durability. Made from high-quality carbon fiber, this shock tower provides the perfect balance of strength and lightweight performance. The 4-dot design gives you multiple shock mounting options, making it easy to fine-tune your suspension for any track condition. Features: Premium carbon fiber construction – lightweight yet rigid 4-dot design for expanded shock mounting adjustability Improves rear suspension tuning and consistency Factory XRAY precision fit and finish Direct replacement for stock rear shock tower Compatibility: XRAY XB2 (all versions requiring 4-dot rear tower) Includes: (1) Carbon Rear Shock Tower – 4-Dots

Read more less

Upgrade your ride with these precision-engineered 55mm Adjustable Turnbuckles, crafted from world-renowned HUDY Spring Steel™ for unmatched strength and durability. Featuring M3 left- and right-hand threads, they allow for easy and precise suspension and steering adjustments without removing them from the car. Features: Premium HUDY Spring Steel™ for maximum lifespan and toughness 55mm length – ideal fit for multiple XB2/XT2 suspension applications M3 left & right threads for fast, fine adjustments Black coating for wear resistance and a pro finish Includes two turnbuckles Compatibility: XRAY XB2 XRAY XT2 Other XRAY models requiring 55mm M3 turnbuckles Includes: (2) 55mm Adjustable Turnbuckles

Read more less

Fine-tune your XB2’s handling with the XRAY 2024 Front Anti-Roll Bars. These sway bars allow you to balance steering response and cornering stability to match track conditions. Overview:Adjusting the front anti-roll bar directly affects steering response and front-end stability: Softer bar (thinner mm): Increases front grip and stability in low-traction conditions Stiffer bar (thicker mm): Reduces body roll for precise cornering but may decrease front-end grip Available Sizes: 0.8mm (Softest) – XRA322489 1.0mm – XRA322490 1.1mm – XRA322491 1.2mm – XRA322492 1.3mm (Hardest) – XRA322493 Effects of Roll Bar Changes: Softer bar: More chassis roll, more cornering grip, slower response Stiffer bar: Less chassis roll, quicker steering response, less cornering grip Compatibility: XRAY XB2 (2024 and later) Includes: (1) Anti-Roll Bar in chosen thickness    

Read more less

Fine-tune your steering geometry with XRAY’s precision-machined Graphite Steering Block Extension Plates. Available in 1-dot, 2-dot, and 3-dot options, these lightweight graphite plates let you adjust steering response and handling characteristics to match your track and driving style. Features: Made from high-quality graphite for strength and precision Adjusts steering geometry for optimal handling Lightweight, durable construction Direct fit for XB2 & XT2 platforms Includes 2 extension plates per set Dot Options (choose your setup): 1-Dot (322294): Minimal extension – smooth, stable steering 2-Dot (322295): Balanced setting – great all-around response 3-Dot (322296): Maximum extension – aggressive steering feel Compatibility: XRAY XB2 (all versions) XRAY XT2 (all versions) Includes: (2) Graphite Steering Block Extension Plates (select 1-dot, 2-dot, or 3-dot version)

Read more less

Upgrade your front end with XRAY’s Graphite Composite Steering Block for the XB2. Molded from a reinforced graphite composite material, this steering block provides increased strength and precision compared to standard composite parts, ensuring smoother steering response and long-lasting durability. Features: Strong graphite composite material for added rigidity Enhances steering consistency and precision Direct replacement upgrade for stock XB2 steering blocks Lightweight yet durable design Compatibility: XRAY XB2 (all versions) Other XRAY platforms using XB2 steering blocks Includes: (1) Graphite Composite Steering Block – 322250-G

Read more less