🔋🔌 A Simple Solution for 4S LiPo Balance ConnectionsThe ProTek RC 4S LiPo Charge/Balance Adapter is designed to provide an XH female to XH female connection for compatible 4S LiPo charging and balancing setups. It’s a handy addition to the pit box when you need to adapt between compatible XH balance connections.🔋 About the 4S LiPo Charge/Balance Adapter🔌 XH Female to XH FemaleThis adapter features an XH female connector on each end, allowing compatible 4S balance connections to be joined without modifying your existing wiring.⚙️ Made for 4S LiPo ApplicationsDesigned specifically for compatible 4S LiPo battery balance connections, making it useful for charging setups that require a female-to-female XH adapter.🧰 Great for the Pit BoxSmall charging adapters are easy to need and not have. Keeping the correct adapter on hand can make setting up your charger at home or at the track much easier.✨ Features✔ Designed for 4S LiPo applications✔ XH female connector on both ends✔ Provides a female-to-female balance connection✔ Compact and easy to keep in your charging gear✔ Useful for compatible charging and balancing setups✔ Genuine ProTek RC accessory📦 Includes (1) ProTek RC 4S LiPo Charge/Balance Adapter🔧 Compatibility Compatible 4S LiPo charging and balance setups using XH connections📝 Notes Verify your battery and charger balance connector type before use. This adapter is intended for the balance connection and does not replace the battery’s main charge lead.

Read more less

🏁⚙️ Factory Team Carbon Upgrade for the 7-Series DrivetrainThe Team Associated Factory Team Carbon 3-Gear Gearbox is an optional drivetrain component designed for compatible RC10B7, RC10T7, and RC10SC7 platforms using the 3-gear transmission configuration. Its carbon-composite construction provides a lightweight, rigid gearbox option for race-focused builds. 🏁 About the Factory Team 3-Gear Gearbox⚙️ 3-Gear Transmission DesignDesigned specifically for Team Associated’s 3-gear transmission layout, this gearbox provides the housing needed for compatible 7-series drivetrain setups.🔧 Carbon-Composite ConstructionThe Factory Team gearbox uses carbon-composite material for a lightweight and rigid construction while maintaining proper drivetrain alignment.🏎️ Factory Team UpgradeIdeal for racers building, converting, or servicing a compatible Team Associated 7-series vehicle with the 3-gear gearbox configuration.✨ Features✔ Factory Team carbon-composite construction✔ Designed for 3-gear transmission configurations✔ Lightweight and rigid gearbox design✔ Genuine Team Associated Factory Team component✔ Designed for compatible RC10 7-series platforms📦 Includes (1) Team Associated Factory Team Carbon 3-Gear Gearbox Set🔧 Compatibility Team Associated RC10B7 Team Associated RC10B7.1 Team Associated RC10T7 Team Associated RC10SC7 📝 Notes This is the Factory Team carbon-composite version of the 3-gear gearbox. Verify your vehicle is configured for the compatible 3-gear transmission setup before installation.  

Read more less

🏁⚙️ Sharpen Up Your Rear Suspension ResponseThe Aerox Long 1/10 Off-Road Rear Agile Spring Tuning Set is designed for racers looking for sharp, responsive handling and precise suspension control. Engineered by Schumacher, this four-pair tuning set gives you a range of rear spring options for dialing in your buggy as track conditions and grip levels change.🏁 About the Agile Rear Spring Set⚡ Sharp & Responsive HandlingAerox Agile springs are designed to deliver quick response and flatter cornering characteristics, making them a great tuning option for faster layouts and conditions where a responsive chassis is preferred.⚙️ Fine Suspension TuningClosely spaced spring-rate increments allow for small, precise setup changes, helping racers fine-tune rear traction, chassis roll, and overall responsiveness.🔧 Long Length Rear SpringsThis set features Long rear springs for compatible 1/10 off-road buggy applications, with easy identification between the different spring options for quick setup changes at the track.✨ Features✔ Four pairs of Long rear springs✔ Agile spring characteristics for sharp handling✔ Designed for flatter, responsive cornering✔ Allows precise suspension setup changes✔ Close spring-rate increments for fine tuning✔ Designed for 1/10 off-road buggy applications✔ Eight individual springs included📦 Includes (4) Pairs Aerox Long 1/10 Off-Road Rear Agile Springs (8) Individual Springs Total📝 Tuning Notes Softer springs: Increase chassis roll and traction, perform better in bumpy conditions, and are more likely to bottom out. Stiffer springs: Decrease chassis roll and traction while increasing responsiveness. This is the Long Rear Agile tuning set.

Read more less

🏁⚙️ Sharpen Up Your Front-End ResponseThe Aerox Medium 1/10 Off-Road Front Agile Spring Tuning Set is designed for racers looking for sharp, responsive handling and precise suspension control. Engineered by Schumacher and tested by top drivers, these springs provide four pairs of tuning options to help dial in your buggy for changing track conditions.🏁 About the Agile Front Spring Set⚡ Sharp & Responsive HandlingAerox Agile springs are designed to provide quick, precise response with flatter cornering characteristics, making them especially well suited for faster track layouts where sharp handling is key.⚙️ Fine Suspension TuningConstant wire diameter and closely spaced spring-rate increments allow racers to make small, controlled suspension changes rather than large jumps between setups.🔧 Medium Length Front SpringsThis set features Medium length front springs designed for compatible 1/10 off-road buggy applications. Color coding makes the different spring options easy to identify when making setup changes at the track.✨ Features✔ Four pairs of Medium front springs✔ Agile spring characteristics for sharp handling✔ Designed for flatter, responsive cornering✔ Engineered by Schumacher✔ Tested by top-level drivers✔ Constant wire diameter for consistent performance✔ Close rate increments for precise tuning✔ Color coded for easy identification✔ Designed for 1/10 off-road buggy applications📦 Includes (4) Pairs Aerox Medium 1/10 Off-Road Front Agile Springs (8) Individual Springs Total🔧 Compatibility Schumacher CAT K1 Schumacher CAT K1 Aero Schumacher CAT K2 Schumacher CAT L1 Schumacher CAT SX2 Schumacher CAT SX3 Schumacher Cougar KF Schumacher Cougar KF2 Schumacher Cougar KF2 SE Schumacher Cougar KR Schumacher Cougar LD2 Schumacher Cougar Laydown Schumacher Cougar SV Schumacher Cougar SV2 Schumacher Cougar SVR Schumacher Storm ST📝 Tuning Notes Softer springs: Increase chassis roll and traction, perform better in bumpy conditions, and are more likely to bottom out. Stiffer springs: Decrease chassis roll and traction while increasing responsiveness. This is the Medium Front Agile tuning set.

Read more less

🏁⚙️ Dial In Your Suspension with Seven Spring RatesThe Core RC High Response Medium Spring Tuning Set gives racers a convenient range of suspension springs for fine-tuning their off-road setup. With seven pairs of springs included, this tuning set makes it easy to adjust suspension response as track conditions and grip levels change.🏁 About the High Response Spring Tuning Set⚙️ Seven Pairs for Fine TuningWith seven different pairs included, racers can make smaller spring changes to dial in chassis balance, traction, and responsiveness without needing to purchase each pair separately.🏎️ High Response DesignCore RC High Response springs are designed to provide responsive suspension performance, giving racers additional control over how the chassis reacts through corners, bumps, and quick direction changes.🔧 Medium Length SpringsThis is the Medium length High Response tuning set, designed for compatible off-road buggy big bore shock applications requiring medium-length springs.✨ Features✔ High Response spring design✔ Medium length configuration✔ Seven pairs of springs included✔ Allows precise suspension tuning✔ Helps tune traction, chassis roll, and responsiveness✔ Designed for off-road racing applications✔ Convenient complete tuning set📦 Includes (7) Pairs Core RC Medium High Response Springs (14) Individual Springs Total📝 Tuning Notes Softer springs: Increase chassis roll and traction and can work better in bumpy conditions. Stiffer springs: Reduce chassis roll and provide increased responsiveness. This is the Medium length spring tuning set. Individual spring rates were not provided in the supplied product information, so they are not listed here.

Read more less

🏁⚙️ Fine-Tune Your Suspension with High Response SpringsThe Core-RC Long Length High Response Spring Tuning Set was developed by Schumacher engineers and top-level drivers across a wide range of track conditions, from low-grip dirt to high-grip carpet. Designed for off-road buggies using big bore shocks, these springs provide increased responsiveness while allowing racers to make precise suspension adjustments with closely spaced spring rates.🏁 About the High Response Spring Tuning Set⚙️ Four Spring Rates for Precise TuningThe set includes four different spring rates ranging from 2.0 to 2.6 lb/in, allowing small, controlled setup changes to suit changing grip levels, track conditions, and driving preferences.🏎️ High Response DesignCompared with alternative CORE RC and Schumacher Big Bore Springs, the High Response design uses fewer coils and a thinner wire diameter to improve responsiveness while reducing weight.🔧 Lightweight & ConsistentThe High Response springs provide an average weight savings of approximately 4 grams per pair compared with previous CORE RC springs. Constant wire diameter, precision-ground ends, and close rate increments help provide consistent performance and accurate tuning.✨ Features✔ Four spring rates included for suspension tuning✔ Developed for off-road buggy racing✔ Tested from low-grip dirt to high-grip carpet✔ High Response design for improved responsiveness✔ Fewer coils and thinner wire diameter✔ Approximately 4g average weight savings per pair✔ Close spring-rate increments for fine adjustments✔ Constant wire diameter✔ Precision-ground ends✔ Black-coated springs with easy rate identification✔ Designed for rear big bore shock applications📦 Includes (2) CR808 Long Red High Response Springs – 2.0 lb/in (2) CR809 Long Green High Response Springs – 2.2 lb/in (2) CR810 Long Blue High Response Springs – 2.4 lb/in (2) CR811 Long Black High Response Springs – 2.6 lb/in🔧 CompatibilityDesigned for rear big bore shock applications including: Schumacher Cougar Laydown Schumacher CAT L1 EVO Other compatible vehicles using big bore shocks📝 Tuning Notes Softer springs: Increase chassis roll and traction, work better in bumpy conditions, but are more likely to bottom out. Stiffer springs: Decrease chassis roll and traction while increasing responsiveness. This set includes 8 individual springs total — two of each of the four spring rates.

Read more less

🏁⚙️ Dial In Your XB2 Front-End SetupThe XRAY XB2 Composite Anti-Roll Bar Front Upper Deck is a genuine tuning component designed for the XB2 platform. This HARD composite version provides racers with an additional setup option while allowing the use of a front anti-roll bar system.🏁 About the Front Upper Deck⚙️ Anti-Roll Bar ReadyDesigned specifically for anti-roll bar applications, this front upper deck provides the proper mounting configuration for incorporating a front anti-roll bar into your XB2 setup.🔧 HARD Composite ConstructionMolded from XRAY's HARD composite material, this upper deck provides a rigid tuning option for racers looking to adjust chassis characteristics and front-end response.🏎️ Built for Setup TuningXRAY's optional composite components give racers additional ways to fine-tune their buggy for different track surfaces, grip levels, and driving preferences.✨ Features✔ Genuine XRAY tuning part✔ HARD composite construction✔ Front upper deck design✔ Designed for anti-roll bar applications✔ Provides an additional chassis tuning option✔ Direct-fit XB2 component📦 Includes (1) Composite Anti-Roll Bar Front Upper Deck – Hard🔧 Compatibility XRAY XB2📝 Notes This is the HARD composite version. Anti-roll bar components are sold separately unless otherwise specified. Verify compatibility with your specific XB2 model before installation.

Read more less

🏁🔧 Precision Spacing for Your XRAY SetupThe XRAY Aluminum Shim Set is a genuine tuning and replacement option designed for precise spacing and adjustment on compatible RC applications. Measuring 3x5x1.0mm, these lightweight aluminum shims feature XRAY's signature orange finish and are supplied in a convenient pack of ten.🏁 About the Aluminum Shim Set⚙️ Precision Setup AdjustmentsThese 1.0mm thick shims provide a simple way to make precise spacing adjustments wherever the 3x5mm shim size is required.🔧 Aluminum ConstructionMade from aluminum for a lightweight and durable setup solution, each shim features an orange finish for the classic XRAY factory look.🏎️ Perfect for the Parts BoxWith ten shims included, this set is a handy addition to any XRAY racer's pit box for maintenance, rebuilds, and setup changes.✨ Features✔ Genuine XRAY tuning hardware✔ Aluminum construction✔ 3x5x1.0mm size✔ 1.0mm thickness✔ Orange finish✔ Ideal for precision spacing and setup adjustments✔ Ten shims included📦 Includes (10) 3x5x1.0mm Aluminum Shims – Orange📝 Notes Genuine XRAY replacement/tuning hardware. Verify the required shim dimensions for your specific application before installation.

Read more less

🏁⚙️ Tune Rear Hub Flex for Changing Track ConditionsThe XRAY HARD Composite Rear Upright is an optional tuning component designed to give racers another way to fine-tune rear suspension feel. Featuring the upper mounting position and XRAY's HARD composite material, changing rear hub material allows you to alter the amount of flex in the upright to better suit different track conditions and handling preferences.🏁 About the HARD Composite Rear Upright⚙️ Rear Hub Flex TuningChanging the rear upright material influences the amount of flex in the hub assembly, giving racers another useful setup adjustment for changing grip levels and track conditions.🔧 HARD Composite ConstructionThis version is molded from XRAY's HARD composite material for a firmer hub option and is designed with the upper mounting position.🏎️ Built for Setup OptionsWhether you're adapting to carpet, dirt, or changing track grip, XRAY's interchangeable upright options allow you to further fine-tune the rear of your buggy or truck.✨ Features✔ Genuine XRAY optional tuning part✔ HARD composite construction✔ Upper position rear upright✔ Allows rear hub flex tuning✔ Helps fine-tune handling for different track conditions✔ One rear upright included📦 Includes (1) HARD Composite Rear Upright – Upper Position🔧 Compatibility XRAY XB2 Original XRAY XB2 Dirt XRAY XB2 2017 Carpet XRAY XB2 2017 Dirt XRAY XB2 2018 Carpet XRAY XB2 2019 Carpet XRAY XB2 2019 Dirt XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XB2 2021 Carpet XRAY XB2 2021 Dirt XRAY XB4 2019 XRAY XB4 2020 XRAY XB4 2021 Carpet XRAY XB4 2021 Dirt XRAY XT2 2021 Carpet XRAY XT4📝 Notes This is the HARD composite, upper-position version. Package includes one rear upright. Genuine XRAY optional tuning component.

Read more less

🏁⚙️ Fine-Tune Your XB2 Chassis FlexThe XRAY Short Composite Front Chassis Side Brace is a genuine tuning component originally designed for the XB2 2018 Carpet platform. The shorter design allows installation of the updated graphite side guard braces, giving racers an additional way to adjust front chassis flex and dial in handling for different track conditions.🏁 About the Short Front Chassis Side Brace⚙️ Adjustable Chassis FlexThe shorter front brace design works with XRAY's updated graphite side guard braces, allowing racers to tune front chassis flex as part of their overall setup.🔧 Composite ConstructionMade from composite material, these braces provide proper fit and function while allowing the chassis and side guard system to work together as intended.🏎️ Built for TuningChanging chassis flex can help racers adapt their setup for different surfaces and grip levels, making these short braces a useful tuning option for compatible XB2 and XT2 platforms.✨ Features✔ Genuine XRAY tuning parts✔ Short front chassis side brace design✔ Composite construction✔ Allows installation of updated graphite side guard braces✔ Provides additional front chassis flex adjustment options✔ Two braces included📦 Includes (2) Short Composite Front Chassis Side Braces🔧 Compatibility XRAY XB2 2018 Carpet XRAY XB2 2019 Carpet XRAY XB2 2019 Dirt XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XT2 2021 Carpet XRAY XT2 2021 Dirt📝 Notes Updated graphite side guard braces are sold separately. Genuine XRAY replacement/tuning parts.

Read more less

🏁🔧 Refresh Your XB4 Shocks with Genuine XRAY ComponentsThe XRAY Composite Shock Part Set is a genuine replacement parts package designed for the XRAY XB4 1/10 4WD buggy. This convenient set includes the key composite components needed to replace worn or damaged parts on two shock assemblies.🏁 About the Composite Shock Part Set⚙️ Complete Shock ComponentsThe set includes two shock caps, two spring cups, and two shock rod ends, making it an easy way to replace several commonly used shock components at once.🔧 Composite ConstructionXRAY's composite components provide the proper fit and function required for smooth, reliable shock operation.🏎️ Made for the XB4Designed specifically for the XRAY XB4 platform, these genuine replacement parts provide direct-fit compatibility with the factory shock assemblies.✨ Features✔ Genuine XRAY replacement parts✔ Composite construction✔ Replacement components for two shocks✔ Includes shock caps, spring cups, and rod ends✔ Direct-fit replacement for the XRAY XB4📦 Includes (2) Shock Caps (2) Spring Cups (2) Shock Rod Ends🔧 Compatibility XRAY XB4 1/10 4WD Buggy📝 Notes Genuine XRAY replacement parts. Includes composite shock components only. Shocks and other suspension components are sold separately.

Read more less

🏁⚙️ Strength, Precision & a Clean Race-Ready LookThe J&T Bearing Co. Titanium "Milled" XD Turnbuckle Set is a premium upgrade designed specifically for the 2025 XRAY XB2 Carpet and Dirt platforms. Made from high-quality Grade 5 titanium, these turnbuckles combine increased strength and durability with a sleek milled design that gives your buggy a sharp, finished appearance.🏁 About the Titanium "Milled" XD Turnbuckles💪 Reinforced for RacingThe XD design features a reinforced 4mm center for increased durability compared to standard finned-style turnbuckles, making them well suited for the demands of competitive racing.🔧 Milled Titanium ConstructionEach turnbuckle features a 3.5mm milled center that tapers down for a clean, timeless look. Grade 5 titanium construction provides an excellent combination of strength and lightweight performance.⚙️ Stock-Style ThreadingStandard right and left-hand threads allow the turnbuckles to work with the stock rod ends. A 1/8" drill bit is included for modifying the standard rod ends if required for proper fitment.✨ Features✔ Grade 5 titanium construction✔ Reinforced 4mm center for increased durability✔ 3.5mm milled center design✔ Standard right and left-hand threads✔ Compatible with stock rod ends✔ 1/8" drill bit included for rod end modification if needed✔ Black finish✔ Designed specifically for the 2025 XRAY XB2📦 Includes (1) XRAY XB2 '25 Titanium "Milled" XD Turnbuckle Set (1) 1/8" Drill Bit🔧 Compatibility XRAY XB2 2025 Carpet XRAY XB2 2025 Dirt📝 Notes Stock rod ends may require modification using the included 1/8" drill bit. Vehicle and other components are sold separately.  

Read more less

The Revolution Design Aluminum Clamping Servo Horn is a precision steering upgrade designed for the XRAY XB2 platform. Machined from high-quality 7075 aluminum, this lightweight and durable servo horn features a secure clamping design to minimize play and provide precise, consistent steering response. About the Aluminum Clamping Servo Horn Precision Steering Upgrade The clamping design provides a tight, secure fit on compatible 23T servo splines, helping reduce unwanted play in the steering system. High-strength 7075 aluminum construction delivers excellent rigidity without unnecessary weight.A silver chamfer and laser-etched RDRP logo complete the premium race-inspired appearance. Features ✔ High-quality 7075 aluminum construction✔ 23T servo spline✔ Designed for Hitec and Sanwa servo applications✔ Secure clamping design✔ Helps reduce steering play✔ Lightweight and extremely strong✔ Silver chamfer detailing✔ Laser-etched RDRP logo✔ Designed for precise steering response Includes (1) Revolution Design Aluminum Clamping Servo Horn Specifications Specification Details Brand Revolution Design Part Number RDRP-0665 Product Type Clamping Servo Horn Material 7075 Aluminum Spline 23T Servo Compatibility Hitec / Sanwa Quantity 1 Compatibility Compatible with: XRAY XB2 Original XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB2 2025 Carpet XRAY XB2 2025 Dirt Notes Designed for compatible 23T servo splines. Verify your servo spline count before installation. Servo and vehicle are sold separately.

Read more less

The ProTek RC SG3 HV ULCG Shorty LiPo Battery combines a lightweight, ultra-low center of gravity design with low internal resistance and high-voltage Silicon Graphene technology. Designed with competitive 1/10 buggy racing in mind, this 4600mAh 2S pack delivers consistent power, improved efficiency, and cooler operating temperatures throughout the run. About the SG3 HV ULCG Shorty LiPo Battery High-Voltage Performance Featuring ProTek's third-generation Silicon Graphene high-voltage cell technology, this pack provides a 7.6V nominal voltage with a 150C peak discharge rating. Lower internal resistance helps improve efficiency and power delivery while reducing operating temperatures. Ultra-Low Center of Gravity The compact 18.5mm height and 155g weight help lower the vehicle's center of gravity and optimize weight balance for improved handling. The shorty configuration is well suited for both 2WD and 4WD 1/10 buggy racing. Race-Ready Connections The battery features 5mm bullet connections and a 2mm balance connection. Two 5mm-to-4mm bullet reducers are also included for additional setup flexibility. Features ✔ 7.6V 2S high-voltage LiPo configuration✔ 4600mAh capacity✔ 150C peak discharge rating✔ Low internal resistance (Low IR) design✔ SG3 third-generation Silicon Graphene technology✔ Ultra-low center of gravity (ULCG) shorty configuration✔ Designed for consistent power delivery and improved efficiency✔ Compact 18.5mm pack height✔ 5mm bullet battery connections✔ 2mm bullet balance connection✔ 5mm-to-4mm bullet reducers included✔ Ideal for 1/10 2WD and 4WD buggy racing✔ ROAR Approved Includes (1) ProTek RC 2S 150C Low IR SG3 HV ULCG Shorty LiPo Battery – 7.6V/4600mAh (2) 5mm to 4mm Bullet Reducers (2) 5mm Bullet Connectors (1) 2mm Balance Bullet Connector Needed to Complete LiPo-compatible balance charger capable of charging 2S high-voltage (LiHV) batteries Appropriate charging leads/connections for your charger LiPo-safe charging bag or container Specifications Specification Details Brand ProTek RC Part Number PTK-5124-26 Battery Type Silicon Graphene High-Voltage LiPo Configuration 2S1P Nominal Voltage 7.6V Capacity 4600mAh Peak Discharge Rate 150C Maximum Charge Rate 1.5C Watt Hours 34.9Wh Battery Connector 5mm Bullets Balance Connector 2mm Bullet Dimensions 47 x 96 x 18.5mm Weight 155g (5.4oz) ROAR Approved Yes Notes Always use a LiPo-compatible balance charger and LiPo-safe charging bag or container. Never leave LiPo batteries unattended while charging. Do not charge the battery while installed in the vehicle. Do not overcharge or over-discharge the battery. End voltage should not be allowed to drop below 3.2V per cell. Allow the battery to cool completely before recharging after use. Read and follow all battery and charger safety instructions before use.  

Read more less

The Pro-Motion Fury 2.2" Wide 2WD Front LP Buggy Tires are designed for high-performance carpet and turf racing. Featuring a low-profile wide carcass and Pro-Motion's C5 Super Soft compound, the Fury delivers responsive steering, predictable handling, and consistent grip for competitive 1/10 scale 2WD buggy applications. The low-profile construction helps minimize sidewall deflection, providing increased stability and control through fast transitions and technical corners. About the Fury Front Buggy Tires Grip & Stability The Fury uses pyramid-shaped tread pins positioned across the tire to provide strong grip while promoting consistent wear throughout the life of the tire. Its low-profile carcass reduces unwanted sidewall movement, helping the buggy remain stable and predictable during aggressive direction changes. Smooth Steering Response Outer tread wedges begin with a smaller profile and gradually widen toward the sidewall. This design provides responsive steering and cornering grip without creating an overly edgy or unpredictable front-end feel. C5 Super Soft Compound This version features Pro-Motion's C5 Super Soft compound for high-grip carpet and turf racing applications. Features ✔ Designed for 1/10 scale 2WD buggy front applications✔ C5 Super Soft compound✔ 2.2" Wide LP design✔ Low-profile carcass for improved stability✔ Reduced sidewall deflection✔ Pyramid-shaped tread pins✔ Designed for consistent, long-lasting grip✔ Outer wedges provide smooth steering response✔ Precise and predictable cornering✔ Designed for carpet and turf surfaces✔ Foam inserts included Includes (2) Pro-Motion Fury 2.2" Wide 2WD Front LP Buggy Tires – C5 Super Soft (2) Foam Inserts Specifications Specification Details Brand Pro-Motion Part Number PMT3085-C5 Product Fury Scale 1/10 Position Front Vehicle Type 2WD Buggy Wheel Diameter 2.2" Carcass Wide Low-Profile (LP) Compound C5 – Super Soft Surface Carpet / Turf Inserts Foam Notes Tires are supplied unmounted. Designed for compatible 2.2" Wide LP 2WD buggy front wheels. Foam inserts are included. Wheels and tire glue are sold separately.

Read more less

The Vision Racing Aluminum Front Ball Stud Mounting Plate is a precision-machined suspension upgrade designed for Vision Racing Team Associated 7 Series carbon chassis conversions. Machined from high-strength 7075-T6 billet aluminum and finished with a durable black hard anodizing, this one-piece plate provides increased strength along with additional front suspension tuning options. About the Aluminum Front Ball Stud Mounting Plate Increased Suspension Adjustability Vision Racing's design eliminates the outer stock mounting hole and adds two intermediate ball stud mounting positions, allowing racers to make finer adjustments to steering response and front roll center geometry. Strong One-Piece Construction The one-piece aluminum design maximizes ball stud thread engagement for a stronger, more rigid mounting point. This construction also eliminates the need for a separate nylon lock nut. 7075-T6 Billet Aluminum Precision-machined from 7075-T6 billet aluminum, the mounting plate provides a lightweight yet durable upgrade suitable for demanding competition use. A black hard-anodized finish adds wear resistance and provides a clean factory appearance. Features ✔ Designed for Vision Racing Team Associated 7 Series carbon chassis conversions✔ Precision-machined from 7075-T6 billet aluminum✔ Black hard-anodized finish✔ Adds two intermediate ball stud mounting positions✔ Allows finer steering and front roll center tuning✔ Eliminates the stock outer mounting hole✔ Maximizes ball stud thread engagement✔ Eliminates the need for a separate nylon lock nut✔ Strong one-piece construction✔ Lightweight and durable design✔ Precision fit for consistent suspension setup Includes (1) Vision Racing Aluminum Front Ball Stud Mounting Plate Specifications Specification Details Brand Vision Racing Part Number 00659 Product Type Front Ball Stud Mounting / Camber Plate Material 7075-T6 Billet Aluminum Finish Black Hard Anodized Construction One-Piece Application Team Associated 7 Series Carbon Chassis Conversion Compatibility Designed for: Vision Racing Team Associated 7 Series Carbon Chassis Conversions Notes This plate is intended for Vision Racing carbon chassis conversions and should not be assumed to fit a stock Team Associated chassis. Provides additional ball stud positioning for finer front suspension geometry adjustments. Installation hardware and other components are not listed as included unless otherwise specified.      

Read more less

The Hobbywing XR10 Pro G3X Stock Spec ESC and V10 G5 21.5T Torque Motor Combo delivers a complete competition power system designed specifically for 1/10 scale stock class racing. Combining the highly tunable XR10 Pro G3X Stock Spec ESC with Hobbywing's V10 G5 sensored brushless motor, this combo provides precise throttle control, efficient power delivery, advanced thermal management, and extensive setup adjustability. This version includes the 21.5T TORQUE motor, providing racers with a competition-focused option for classes requiring a 21.5-turn motor. About the XR10 Pro G3X & V10 G5 Combo Precision Stock Spec ESC The XR10 Pro G3X Stock Spec ESC is engineered for competitive stock racing with refined throttle and braking control. Multiple selectable profiles can be customized, renamed, and saved for different track conditions and racing classes. Adjustable PWM and brake frequencies allow racers to fine-tune throttle feel and braking force, while Hobbywing's Softening function provides additional control over power delivery and drivability. V10 G5 21.5T Torque Motor The included V10 G5 21.5T sensored brushless motor is built to competition standards with an emphasis on power, efficiency, and consistent performance. This TORQUE version provides strong, controllable power delivery while retaining the extensive tuning capabilities of the V10 G5 platform. Advanced Motor Cooling An exposed winding design and patented rotor cooling system help dissipate heat during demanding racing conditions. Lightweight construction and an optimized center of gravity help reduce unnecessary weight while contributing to improved vehicle balance and handling. Race-Level Tunability Adjustable Hall timing and sensing distance allow racers to fine-tune motor response to suit different track layouts and driving styles. The motor's modular construction allows easier servicing, while the ESC provides external programming and accessory ports along with built-in data logging for additional setup and performance analysis. Features ✔ Complete competition ESC and motor combo✔ Designed for 1/10 scale stock racing✔ XR10 Pro G3X Stock Spec ESC✔ V10 G5 21.5T TORQUE brushless motor✔ Sensored brushless operation✔ 160A continuous ESC current✔ 1200A burst ESC current✔ 2S LiPo ESC operation✔ Adjustable 5-7.4V BEC✔ Multiple customizable ESC profiles✔ Adjustable PWM frequency✔ Adjustable brake frequency✔ Hobbywing Softening function✔ Built-in data logging✔ Comprehensive ESC protection systems✔ Adjustable motor Hall timing✔ Adjustable sensing distance✔ Exposed winding motor design✔ Patented rotor cooling system✔ Lightweight motor construction✔ Optimized center of gravity✔ Modular motor design for easier maintenance✔ ESC cooling fan included✔ Programmable ESC Includes (1) Hobbywing XR10 Pro G3X Stock Spec Sensored Brushless ESC (1) Hobbywing V10 G5 21.5T Torque Sensored Brushless Motor (1) Sensor Cable (1) Set of Wiring Leads (1) ESC Cooling Fan (1) Instruction Manual Needed to Complete (1) Compatible 2S LiPo Battery Battery and motor connectors as required Compatible vehicle and radio electronics Soldering and installation equipment as required Specifications Specification Details ESC Model XR10 Pro G3X Stock Spec Suggested Application 1/10 Motor Type Sensored Brushless Input Voltage 2S LiPo (7.4V) Continuous Current 160A Burst Current 1200A BEC Voltage 5-7.4V BEC Continuous Current 5A Dimensions 35.0 x 33.6 x 30.3mm (1.38 x 1.32 x 1.19") Weight 101.5g (3.58oz) Motor Connector Bare Wire Battery Connector Bare Wire Programmable Yes Motor Model V10 G5 Version Torque Turns 21.5T Suggested Application 1/10 Motor Type Sensored Brushless Motor Voltage 1S-3S Adjustable Timing Yes Connector Solder Tab Dimensions 35.8 x 51.9mm (1.41 x 2.04") Shaft Diameter 3.175mm (1/8") Weight 138g (4.87oz) Notes This combo includes the 21.5T TORQUE version of the Hobbywing V10 G5 motor. The XR10 Pro G3X Stock Spec ESC is designed for 2S LiPo operation. The V10 G5 motor itself is rated for 1S-3S operation; when paired with the included ESC, follow the ESC's 2S input requirements. Battery and motor connections are supplied as bare wire/solder tabs and may require soldering during installation. Verify applicable motor, ESC, timing, and boost rules for your specific racing class or organization.    

Read more less

The Team Losi Racing 10x14mm Shim Set is a genuine replacement and setup component for compatible TLR and Losi 22-series vehicles. This set includes both 0.1mm and 0.2mm thicknesses, allowing for precise spacing and adjustment during vehicle setup, maintenance, or rebuilding. About the TLR Shim Set Precision Setup & Adjustment With two different shim thicknesses included, this set provides additional flexibility when making fine spacing adjustments. Each shim measures 10x14mm, with five 0.1mm and five 0.2mm shims included. Features ✔ Genuine Team Losi Racing replacement/setup parts✔ 10x14mm shim dimensions✔ Includes two shim thicknesses✔ 0.1mm and 0.2mm options✔ Allows precise spacing and adjustment✔ Ideal for maintenance, rebuilds, and vehicle setup✔ Ten total shims included Includes (5) 10x14x0.1mm Shims (5) 10x14x0.2mm Shims Specifications Specification Details Brand Team Losi Racing Part Number TLR236006 Product Type Shim Set Shim Size 10x14mm Thicknesses 0.1mm & 0.2mm Quantity 10 Total Compatibility Compatible with: Losi 22 4.0 SPEC-Racer Losi 22X Losi 22X-4 1.0 Losi 22X-4 Elite Losi 22X-T Notes Includes five shims of each thickness, for a total of 10 shims. Verify compatibility with your specific vehicle and application before installation.    

Read more less

The XRAY 2.5mm Graphite Steering Block Extension is a front-end tuning option designed to adjust Ackermann geometry and steering response. This 1-slot version provides a handling characteristic between XRAY's standard 2-slot extension and the more aggressive 0-slot version. About the Graphite Steering Block Extension Fine-Tune Steering & Ackermann XRAY designed these extensions to work on either the left or right steering block. The 1-slot configuration turns the outside wheel more than the 2-slot version, producing additional steering while remaining less aggressive than the 0-slot option. Features: Genuine XRAY optional tuning component 2.5mm graphite steering block extensions 1-slot Ackermann configuration Allows fine adjustment of steering characteristics More aggressive steering than the 2-slot configuration Less aggressive than the 0-slot configuration Can be used on left and right steering blocks Designed for tuning across different surfaces and track conditions Lightweight graphite construction Includes two extensions Includes: (2) XRAY Graphite Steering Block Extensions – 1 Slot Specifications: Manufacturer: XRAYPart Number: 322291Material: GraphiteThickness: 2.5mmConfiguration: 1 SlotPosition: Front SteeringQuantity: 2 Compatibility: ✅ XRAY XB2✅ XRAY XT2 XRAY's current XB2 documentation continues to list 322291 as the optional 1-slot steering block extension, alongside 322290 2-slot, 322292 0-slot, and 322293 3-slot configurations. 💡 Pro Tip: XRAY's Ackermann options let you tune how aggressively the car steers: 322290 – 2 Slot: Easier to drive, less aggressive322291 – 1 Slot: Middle-ground steering response322292 – 0 Slot: Most aggressive steering, suited to tight and technical layouts

Read more less

The XRAY Aluminum Front Suspension Holder Brace is a precision-machined suspension tuning component designed for XB2 setups using the optional 23°/29° front lower arm mounts. Manufactured from premium Swiss 7075-T6 aluminum, the brace supports the front suspension holder while allowing either 23° or 29° kick-up configurations. Features: Genuine XRAY optional tuning component CNC-machined Swiss 7075-T6 aluminum Designed for 23° or 29° front kick-up Supports the optional front lower suspension arm mount Precision-machined for accurate suspension geometry Durable aluminum construction Designed for competition-level XB2 setups Required when using applicable 23°/29° optional arm mounts Includes: (1) XRAY Aluminum Front Suspension Holder Brace Specifications: Manufacturer: XRAYPart Number: 321211Material: Swiss 7075-T6 AluminumKick-Up: 23° / 29°Position: FrontType: Suspension Holder Brace Compatibility: ✅ XRAY XB2✅ XRAY XT2 configurations using this front suspension system XRAY manuals document 321211 alongside the optional 322313 aluminum and 322314 brass 23°/29° front lower arm mounts. 💡 Pro Tip: If you're buying 321211, double-check your front arm mount. This brace is specifically associated with the 23°/29° setup and is used with 322313 or 322314.

Read more less

The XRAY Aluminum Rear Hub Plate is a precision-machined rear suspension component designed for XRAY's multi-adjustable rear upright system. Manufactured from premium Swiss 7075-T6 aluminum, this plate provides a strong and precise mounting interface while allowing racers to take advantage of XRAY's adjustable rear hub geometry. About the Aluminum Rear Hub Plate Precision Rear Suspension Adjustment The 323381 rear hub plate works with XRAY's multi-adjustable rear upright system, allowing the rear hub configuration to be tuned through different mounting positions. XRAY factory manuals show the plate installed in the rear upright assembly and provide alternate mounting orientations for setup changes. Features: Genuine XRAY replacement and tuning component CNC-machined from Swiss 7075-T6 aluminum Designed for XRAY multi-adjustable rear uprights Precision-machined for accurate suspension fitment Multiple mounting positions for rear suspension tuning Lightweight and durable aluminum construction Suitable for left or right rear upright Competition-oriented suspension component Great replacement or race-day tuning spare Includes: (1) XRAY Aluminum Rear Hub Plate Specifications: Manufacturer: XRAYPart Number: 323381Material: Swiss 7075-T6 AluminumPosition: RearQuantity: 1 Compatibility: ✅ XRAY XB2✅ XRAY XB4 XRAY factory documentation shows 323381 in both XB2 and XB4 rear upright assemblies. 💡 Pro Tip: This is one rear hub plate, not a pair. The same 323381 plate is used on either the left or right rear upright, so you'll need two if you're replacing both sides. XRAY's assembly diagrams specifically show the rear upright assembly as L=R

Read more less

The XRAY 83mm Front Drive Shaft is a genuine replacement CVD driveshaft designed for the XB4 front drivetrain. Manufactured from XRAY's premium HUDY Spring Steel™, this shaft combines high strength, durability, and precise machining for smooth and efficient power delivery. About the Front Drive Shaft Competition-Ready CVD Performance This 83mm CVD driveshaft uses a 2.5mm drive pin and is designed for the front drivetrain. XRAY factory documentation identifies the 83mm CVD as the included front driveshaft on multiple XB4 generations. Features: Genuine XRAY replacement component Front CVD driveshaft Premium HUDY Spring Steel™ construction 83mm length 2.5mm drive pin Precision-machined for smooth drivetrain operation Designed for competition-level durability Suitable for left or right front position Excellent replacement or race-day spare Includes: (1) XRAY Front Drive Shaft Specifications: Manufacturer: XRAYPart Number: 365225Material: HUDY Spring Steel™Length: 83mmDrive Pin: 2.5mmType: CVDPosition: FrontQuantity: 1 Compatibility: ✅ XRAY XB4 XRAY's factory documentation confirms 365225 across multiple XB4 generations, including the XB4 2021 and XB4 2024 front drivetrain assemblies. 💡 Pro Tip: XRAY also lists other front shaft options around this setup, including 365202 – 83mm ECS and 365226 – 84mm CVD. Make sure you're matching the shaft length and CVD/ECS configuration required by your specific setup.

Read more less

The XRAY 77mm Rear Drive Shaft is a precision CNC-machined CVD driveshaft manufactured from XRAY's renowned HUDY Spring Steel™. Designed for competition-level durability and drivetrain efficiency, this rear driveshaft features a 2.5mm drive pin and a thin, lightweight profile while maintaining excellent strength. XRAY directly confirms these specifications for part 325327. About the Rear Drive Shaft Precision Drivetrain Performance The 77mm driveshaft is designed to provide efficient power transfer through the rear drivetrain. XRAY uses a proprietary hardening process on its HUDY Spring Steel™ driveshafts to increase durability and service life while maintaining a thin shaft profile for reduced rotating mass. Features: Genuine XRAY replacement drivetrain component CNC-machined CVD rear driveshaft Premium HUDY Spring Steel™ construction 77mm length 2.5mm drive pin Thin, lightweight driveshaft design Designed for maximum drivetrain efficiency Proprietary hardened construction for increased durability Precision manufactured for competition RC racing Includes: (1) XRAY Rear Drive Shaft Specifications: Manufacturer: XRAYPart Number: 325327Material: HUDY Spring Steel™Length: 77mmDrive Pin: 2.5mmPosition: RearQuantity: 1 Compatibility: ✅ XRAY XB2 XRAY's XB2 manuals continue to list 325327 in the rear drivetrain, including newer XB2 configurations. There is also evidence of this 77mm shaft being used on certain XB4 configurations, but I would not advertise universal XB4 compatibility because fitment varies by generation and setup. 💡 Pro Tip: When replacing the rear driveshaft, inspect the drive shaft coupling, 2.5mm pin, drive axle, and bearings for wear at the same time. Excessive play in any of these components can reduce drivetrain efficiency and accelerate wear on the new shaft.

Read more less

🏁 High-Grip Stability. Linear Response. Factory-Matched Performance. The XRAY 42mm 5-Dot Front Spring Set is designed specifically for XRAY big-bore shocks, providing a constant linear spring rate throughout compression for predictable and consistent suspension performance. XRAY identifies the 5-dot rating directly on the springs for quick setup identification. Each XRAY spring is individually measured, selected, and matched into pairs to ensure equal length and consistent performance between the left and right sides of your race car. ⚡ Features: 🏁 Genuine XRAY optional tuning springs⚙️ 5-Dot front spring rate📏 42mm length🎯 Linear spring design provides a constant rate throughout compression🔧 Specifically designed for XRAY big-bore shocks⚖️ Individually measured and matched into pairs🚀 Provides additional suspension setup options🔥 XRAY notes the 5-dot spring can improve front stability and overall handling on very high-grip tracks 📦 Includes: (2) XRAY 42mm 5-Dot Front Springs 📏 Specifications: Part Number: 368195Position: FrontLength: 42mmSpring Type: LinearIdentification: 5 DotsQuantity: 2 🔧 Compatibility: Used across multiple XRAY 1/10 off-road platforms, including various: ✅ XRAY XB2✅ XRAY XB4✅ XRAY XT2 Fitment spans numerous generations, so racers should confirm the 42mm front spring configuration used on their specific model before ordering. 💡 Pro Tip: The 5-Dot is a setup spring, not simply a replacement spring. XRAY specifically notes that this spring can provide better front stability and overall handling in very high-grip conditions, making it a useful tuning option for carpet and other high-traction surfaces.

Read more less

 🏁 Lightweight. Precise. Factory XRAY Steering Performance The XRAY Composite Steering Arms are genuine replacement steering components designed for XRAY's 1-piece chassis steering system. XRAY's factory manuals identify 322515 as the HARD composite steering arms included with the vehicle, with aluminum 322516 arms available as the optional upgrade. Designed for smooth, precise steering operation, these composite arms provide the factory steering characteristics intended by XRAY while keeping the steering assembly lightweight. ⚡ Features: 🏁 Genuine XRAY replacement parts💪 Hard composite construction🪶 Lightweight steering system design🎯 Designed for precise and consistent steering operation⚙️ Specifically designed for XRAY's 1-piece chassis configuration🔧 Direct replacement for the factory steering arms🏎️ Competition-ready factory specification🛠️ Great replacement or race-day spare 📦 Includes: (2) XRAY Composite Steering Arms 📏 Specifications: Part Number: 322515Material: Hard CompositeQuantity: 2Position: Front SteeringApplication: 1-Piece Chassis Steering System 🔧 Compatibility: Verified XRAY documentation shows 322515 used on: ✅ XRAY XB2 2024 Carpet✅ XRAY XB2 2024 Dirt ✅ XRAY XB2 2025 Dirt ✅ XRAY XT2 2024 Important: This part is specifically associated with the newer 1-piece chassis steering configuration, so I would not advertise it as fitting older XB2 generations universally. One parts source specifically lists it as incompatible with XB2 2022 and 2023 models. 💡 Pro Tip: If you're looking for a stronger, more rigid steering setup, XRAY offers 322516 Aluminum Steering Arms as the optional upgrade. XRAY states that the aluminum arms increase strength and reliability while improving steering precision and feel.

Read more less

 🏁 Lower Shocks. More Rear Traction. Serious Setup Tuning. The XRAY Aluminum Rear Shock Absorber Adapter Set is a performance tuning upgrade designed to mount the rear shocks lower on the suspension arms. Lowering the shock mounting position helps lower the center of gravity and generate additional rear traction, particularly on high-grip carpet and Astro tracks. Two mounting configurations allow the shocks to be positioned toward the inside or outside, giving racers another way to fine-tune rear suspension behavior. ⚡ Features: 🏁 Genuine XRAY performance option⬇️ Allows rear shocks to mount lower on the suspension arms🎯 Helps generate increased rear traction⚖️ Lowers the vehicle's center of gravity🔧 Inside or outside shock mounting options➡️ Arrow markings make mounting positions easy to identify💪 CNC-machined from premium Swiss 7075-T6 aluminum🪶 Lightweight and extremely durable construction⚫ Black anodized finish🏎️ Especially recommended for carpet and Astro surfaces🔩 Includes +2mm and +4mm longer shock ball joints 📦 Includes: (1) XRAY Rear Shock Absorber Adapter Set (1+1) +2mm Longer Shock Ball Joint +4mm Longer Shock Ball Joint 📏 Specifications: Part Number: 362390Material: Swiss 7075-T6 AluminumFinish: Black AnodizedPosition: RearApplication: Lower Shock Mounting / Suspension Tuning 🔧 Compatibility: XRAY documentation confirms 362390 across multiple current and recent platforms, including: ✅ XRAY XB2✅ XRAY XB4✅ XRAY XT4 XRAY's XB2 documentation specifically lists the 362390 adapter, and current XB4 documentation also shows it in the rear shock assembly. 💡 Pro Tip: This isn't just a replacement part—it's a setup option. Moving the rear shock mounting point lower can increase rear traction and lower CG, which is why XRAY particularly recommends these adapters for carpet and Astro racing. The two mounting alternatives give you additional flexibility when dialing in the rear of the car.

Read more less

 🏁 Precision Machined. Ultra-Durable. Genuine XRAY Performance. The XRAY Front Drive Axle is a genuine replacement drivetrain component designed for the XB4 and compatible XT4 platforms. XRAY manufactures this axle from its renowned HUDY Spring Steel™, providing the strength, durability, and precision required for competitive 1/10 scale racing. Designed for use on either the front left or front right, this axle is a direct replacement for the factory component. ⚡ Features: 🏁 Genuine XRAY replacement part💪 Manufactured from HUDY Spring Steel™⚙️ Precision-machined front wheel drive axle🎯 Designed for accurate drivetrain fit and operation🔧 Fits either front left or front right position🚀 Built for competition-level durability🛠️ Excellent replacement or race-day spare 📦 Includes: (1) XRAY Front Drive Axle 📏 Specifications: Part Number: 365240Material: HUDY Spring Steel™Position: Front Left or RightType: Front Drive Axle 🔧 Compatibility: Verified fitment includes: ✅ XRAY XB4 Original✅ XRAY XB4 2016✅ XRAY XB4 2017✅ XRAY XB4 2018✅ XRAY XB4 2019✅ XRAY XB4 2020✅ XRAY XB4 2021 Carpet✅ XRAY XB4 2021 Dirt✅ XRAY XT4 XRAY's newer documentation also continues to show 365240 in the XB4 front drivetrain, including the XB4 2024 manual and newer XB4 parts listings. 💡 Pro Tip: Front drive axles take significant load from acceleration, steering, and impacts. If you're replacing a damaged axle, check the drive shaft coupling, cross pin, wheel bearings, and wheel hub at the same time for wear or play.

Read more less

🏁 Lightweight Graphite Composite. LCG Differential Performance. Upgrade or replace the gear differential pulley/case on your XRAY with the 324954-G Graphite Composite Gear Differential Case with 53T Pulley. XRAY identifies this as the graphite optional version of the standard 324954 LCG differential component. Designed for XRAY's LCG gear differential, the graphite composite construction provides an optional alternative to the standard hard-composite version while retaining the factory 53-tooth configuration. ⚡ Features: 🏁 Genuine XRAY option part⚙️ Integrated 53-tooth gear differential pulley🪶 Graphite composite construction🔧 Designed for XRAY's LCG gear differential system🎯 Precision factory fitment🚀 Optional graphite version of standard part #324954🛠️ Excellent replacement or tuning component for your race-day parts box 📦 Includes: (1) XRAY LCG Graphite Composite Gear Differential Case with 53T Pulley 📏 Specifications: Part Number: 324954-GMaterial: Graphite CompositeTooth Count: 53TType: LCG Gear Differential Case / PulleyPosition: Rear Drivetrain 🔧 Verified Compatibility: ✅ XRAY XB2 2020 Carpet✅ XRAY XB2 2020 Dirt✅ XRAY XT2 2021 Carpet XRAY's own documentation also shows 324954-G as the optional graphite gear-differential pulley in later XB2 and XT2 LCG differential assemblies. 💡 Pro Tip: The important distinction here is the “-G” suffix. 324954 is the standard hard-composite 53T LCG component, while 324954-G is the optional graphite-composite version.

Read more less

 🏁 Lightweight. Precise. Genuine XRAY Replacement. Keep your XRAY steering system smooth and precise with the XRAY Composite Steering Plate. Designed specifically for XRAY's 1-piece chassis platforms, this factory steering plate provides the proper geometry and fit needed for consistent steering performance. XRAY lists 322574 as the hard composite steering plate included with the vehicle, with the aluminum 322575 available as the optional upgrade. ⚡ Features: 🏁 Genuine XRAY replacement component⚙️ Hard composite construction🪶 Lightweight design for minimal steering-system weight🎯 Maintains precise steering geometry🔧 Designed specifically for XRAY 1-piece chassis configurations🚀 Smooth, consistent steering operation🛠️ Direct replacement for the factory steering plate🏎️ Ideal for maintenance, rebuilds, or your race-day spare parts box 📦 Includes: (1) XRAY Composite Steering Plate 📏 Specifications: Part Number: 322574Material: Hard CompositeType: Steering PlateApplication: 1-Piece Chassis Steering System 🔧 Compatibility: Compatible with XRAY XB2 and XT2 models equipped with the applicable 1-piece chassis, including XB2 and XT2 platforms where 322574 is specified in the factory assembly. 💡 Pro Tip: If you're looking for additional steering-system strength and a more precise steering feel, XRAY offers the 322575 aluminum steering plate as the optional upgrade. XRAY notes that the aluminum version also provides increased clearance around the steering system for easier maintenance and setup adjustments.

Read more less

🏁 Genuine XRAY Replacement. Lightweight Composite. Precision Drivetrain Fit. Keep your XRAY drivetrain running smoothly with the XRAY XB2 LCG 38-Tooth Composite Gear. Designed for the LCG gear differential system, this genuine XRAY replacement component provides the precise fit and drivetrain performance expected from XRAY competition platforms. The lightweight composite construction helps keep rotating mass low while providing the durability needed for competitive 1/10 scale racing. ⚡ Features: 🏁 Genuine XRAY replacement part⚙️ 38-tooth composite gear🪶 Lightweight composite construction🎯 Precision molded for accurate fit and smooth operation🔧 Designed for the XRAY LCG gear differential system🚀 Helps maintain efficient and consistent drivetrain performance🛠️ Ideal replacement for worn or damaged differential components🏎️ Designed for competition-level 1/10 scale racing 📦 Includes: (1) XRAY LCG Composite Gear (38T) 📏 Specifications: Part Number: 324238Tooth Count: 38TMaterial: CompositeType: LCG Gear Differential Component 🔧 Compatibility: ✅ XRAY XB2 2020 Carpet✅ XRAY XB2 2020 Dirt✅ XRAY XT2 2021 Carpet 💡 Pro Tip: Differential and drivetrain gears experience constant load during acceleration and braking. If you're replacing a worn 38T gear, inspect the mating gears and differential components at the same time for damaged or rounded teeth. Keeping the complete gear set in good condition helps maintain a smooth, efficient drivetrain and consistent power delivery.

Read more less

 🏁 Factory Fit. Hard Composite. Precise Front-End Performance Keep your XRAY buggy performing with the precision and consistency it was designed for with the XRAY Hard Composite Front Roll Center Holder. This genuine XRAY replacement component is manufactured from hard composite material and designed to provide the correct mounting and geometry for the front roll center assembly. It's an ideal replacement for a worn or damaged component or a useful spare to keep in your race-day parts box. ⚡ Features: 🏁 Genuine XRAY replacement part💪 Hard composite construction🎯 Designed to maintain precise front suspension geometry⚙️ Supports the front roll center assembly🔧 Direct replacement for the original component🚀 Designed for consistent, competition-level performance🛠️ Great replacement or race-day spare 📦 Includes: (1) XRAY Hard Composite Front Roll Center Holder 📏 Specifications: Part Number: 322040-HMaterial: Hard CompositePosition: FrontType: Roll Center Holder 🔧 Compatibility: ✅ XRAY XB2 Original✅ XRAY XB2 Dirt✅ XRAY XB2 2017 Carpet✅ XRAY XB2 2017 Dirt✅ XRAY XB2 2018 Carpet✅ XRAY XB2 2019 Carpet✅ XRAY XB2 2019 Dirt✅ XRAY XB2 2020 Carpet✅ XRAY XB2 2020 Dirt✅ XRAY XT2 Original✅ XRAY XT2 2021 Carpet✅ XRAY XT2 2021 Dirt 💡 Pro Tip: The front roll center is an important part of suspension geometry and can affect steering response and overall chassis behavior. When replacing the holder, inspect the surrounding suspension hardware for wear or excessive play to help keep your XRAY's front end precise and consistent.

Read more less

🔧🏁 Replacement Composite Chassis Side Guards for XRAY XB2 & XT2 The XRAY Composite Bent Side Chassis Side Guards are genuine replacement components originally designed for the XB2C 2020 Carpet Edition and XB2D 2020 Dirt Edition buggy kits. These molded composite guards provide factory-fit protection along the sides of the chassis while maintaining the proper profile and fit of the vehicle. Also compatible with select XRAY XT2 platforms, this two-piece set is ideal for replacing worn or damaged side guards during a rebuild or routine maintenance. 🏁 About the Chassis Side Guards ⚙️ Bent Side Design The molded bent-side profile is designed to follow the chassis layout of compatible XRAY platforms, providing proper coverage while maintaining clearance for the vehicle's internal components. 🔧 Factory Replacement Fit Designed as genuine XRAY replacement parts, these guards install in place of the original components for a clean, precise fit. 🔧 Features Genuine XRAY replacement chassis components Composite construction Bent-side design Helps protect the sides of the chassis Precision molded for factory fitment Two-piece set Direct replacement for compatible XRAY platforms Ideal for maintenance, rebuilds, or race-day spares 📦 Includes (2) XRAY Composite Bent Side Chassis Side Guards 📊 Product Details Specification Details Brand XRAY Part Number 321250 Product Type Chassis Side Guards Material Composite Design Bent Side Quantity 2 🚙 Compatibility XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XT2 2021 Carpet XRAY XT2 2021 Dirt

Read more less

🔧🏁 Hard Composite Replacement C-Hubs for XRAY XB2 & XT2 The XRAY Composite C-Hub is a genuine replacement suspension component for compatible XRAY XB2 and XT2 1/10 competition platforms. Constructed from XRAY's durable Hard composite material, these C-hubs provide precise factory fitment and a rigid, responsive front suspension setup. Choose the Right or Left side needed for your vehicle. ⚙️ Choose Your Side Right C-Hub – 322210-H Left C-Hub – 322220-H 🔧 Features Genuine XRAY replacement C-hub Available in Right or Left Hard composite construction Durable and rigid design Precision molded for proper fitment Maintains factory front suspension geometry Direct replacement for compatible XRAY platforms Ideal for repairs or race-day spares 📦 Includes (1) XRAY Hard Composite C-Hub in selected Right or Left configuration 📊 Product Details Specification Details Brand XRAY Product Type C-Hub Material Composite Compound Hard Right Part Number 322210-H Left Part Number 322220-H Position Front – Right or Left 🚙 Compatibility XRAY XB2 Original XRAY XB2 Dirt XRAY XB2 2017 Carpet XRAY XB2 2017 Dirt XRAY XB2 2018 Carpet XRAY XB2 2019 Carpet XRAY XB2 2019 Dirt XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XT2 Original XRAY XT2 2021 Carpet XRAY XT2 2021 Dirt

Read more less

🔧🏁 Medium-Compound Rear Suspension Arm for XRAY XB2 & XB4 The XRAY Left Rear Lower Suspension Arm is a genuine replacement suspension component designed for compatible XRAY XB2 and XB4 1/10 competition buggies. Molded from XRAY's Medium composite compound, this arm provides the standard balance of durability, flex, and suspension response for both carpet and dirt racing applications. Precision molded for direct factory fitment, it's an ideal replacement for a worn or damaged suspension arm or a useful spare to keep ready in your pit box. 🏁 About the Medium Suspension Arm ⚙️ Medium Composite Compound XRAY offers these suspension arms in multiple compounds, including Medium, Hard, and Graphite. This Medium version provides the standard compound option for a balanced combination of flex and durability. 🔧 Factory Fitment Designed for compatible XB2 and XB4 platforms, the arm installs directly while maintaining XRAY's intended rear suspension geometry and mounting locations. 🔧 Features Genuine XRAY replacement suspension component Left rear lower suspension arm Medium composite compound Balanced flex and durability Precision molded construction Direct factory fitment Maintains proper suspension geometry Suitable for carpet and dirt racing Compatible with select XB2 and XB4 platforms Great replacement or race-day spare 📦 Includes (1) XRAY Left Rear Lower Suspension Arm – Medium 📊 Product Details Specification Details Brand XRAY Part Number 363122-M Product Type Rear Lower Suspension Arm Position Left Rear Compound Medium Application XRAY XB2 / XB4 🚙 Compatibility XRAY XB2 2021 Carpet XRAY XB2 2021 Dirt XRAY XB2 2023 Carpet XRAY XB2 2023 Dirt XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB4 2020 XRAY XB4 2021 Carpet XRAY XB4 2021 Dirt XRAY XB4 2023 Carpet XRAY XB4 2023 Dirt XRAY XB4 2024 Carpet XRAY XB4 2024 Dirt

Read more less

🔧🏁 Rigid Graphite Suspension Arm for the XRAY XB2 The XRAY Composite Front Right Suspension Arm is a genuine replacement and tuning component for compatible XRAY XB2 1/10 2WD competition buggies. Molded from XRAY's rigid Graphite compound, this version provides a stiffer suspension arm option for racers looking to fine-tune suspension response and handling. Precision molded for factory fitment, the 322113-G is ideal as a direct replacement or performance-oriented suspension tuning option for both carpet and dirt XB2 platforms. 🏁 About the Graphite Suspension Arm ⚙️ Rigid Graphite Compound XRAY offers its suspension arms in multiple material compounds to provide different setup options. This Graphite version is the most rigid option of the available Graphite, Hard, and Medium compounds, providing racers with a stiffer suspension configuration. 🔧 Factory Fitment Designed for compatible XB2 platforms, the arm provides a seamless fit while maintaining XRAY's intended suspension geometry and mounting locations. 🔧 Features Genuine XRAY replacement and tuning component Front right lower suspension arm Rigid Graphite compound Stiffer option compared to Hard and Medium compounds Precision molded construction Direct-fit installation Maintains factory suspension geometry Suitable for carpet and dirt racing Ideal for replacement or suspension setup tuning 📦 Includes (1) XRAY Composite Front Right Suspension Arm – Graphite 📊 Product Details Specification Details Brand XRAY Part Number 322113-G Product Type Front Lower Suspension Arm Position Front Right Compound Graphite Application XRAY XB2 1/10 2WD Buggy 🚙 Compatibility XRAY XB2 Original XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XB2 2021 Carpet XRAY XB2 2021 Dirt XRAY XB2 2022 Carpet XRAY XB2 2022 Dirt XRAY XB2 2023 Carpet XRAY XB2 2023 Dirt XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt Note: The supplied description says "left side," but the actual product listing identifies 322113-G as the Front Right Suspension Arm, so I kept this ad as Front Right.

Read more less

🔧🏁 Graphite Suspension Arm Upgrade for XB4 The XRAY Graphite Rear Lower Suspension Arm is an optional upgrade designed for compatible XRAY XB4 1/10 4WD competition buggies. This right-side rear arm features XRAY's graphite composite construction for a more rigid suspension setup and precise response on the track. Originally designed for the XB4 2016, this arm is also compatible with the 2017 and 2018 XB4 platforms. 🏁 About the Graphite Rear Arm ⚙️ Graphite Composite Construction The graphite material provides increased rigidity compared with softer suspension arm compounds, giving racers an additional tuning option for their XB4 setup. 🔧 Direct-Fit XRAY Upgrade Designed specifically for the XB4 suspension system, the arm provides factory fitment and maintains the intended suspension geometry. 🔧 Features Genuine XRAY optional suspension arm Right rear lower suspension arm Graphite composite construction Rigid suspension tuning option Precision molded for proper fitment Maintains factory suspension geometry Direct-fit upgrade for compatible XB4 models Ideal for racing, replacement, or setup tuning 📦 Includes (1) XRAY Graphite Right Rear Lower Suspension Arm 📊 Product Details Specification Details Brand XRAY Part Number 363111-G Product Type Rear Lower Suspension Arm Position Right Rear Material/Compound Graphite Application XRAY XB4 1/10 4WD Buggy 🚙 Compatibility XRAY XB4 2016 XRAY XB4 2017 XRAY XB4 2018  

Read more less