Upgrade or replace your steering hardware with the XRAY Composite Extended Steering Servo Arm Set. Designed for precision and durability, these servo arms provide a secure fit and consistent steering response for XRAY competition platforms. Manufactured from high-quality composite material, each arm is precision machined for accurate spline engagement and easy installation right out of the package. Features & Benefits: High-quality composite construction for strength and durability Extended design for precise steering geometry Precision machined for accurate spline fit Easy installation with consistent steering performance Compatibility: XRAY XB4 XRAY XT2 1/10 Dirt & Carpet Competition Buggy and Stadium Truck platforms Includes: (1) 23T servo arm (1) 25T servo arm A clean, reliable replacement set to keep your XRAY steering system tight and responsive on any surface.    

Read more less

Maintain precise front suspension geometry with the XRAY Composite Front Lower Arm Mount. This genuine replacement part is designed for the 2024 XB2 and XT2 platforms, making it ideal for repairs, rebuilds, or keeping critical spares on hand. Features & Benefits: Composite construction for strength, durability, and controlled flex Precision molded for accurate fit and consistent suspension alignment Direct replacement for kit-supplied front lower arm mount Compatibility: XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XT2 2024 Carpet XRAY XT2 2024 Dirt Includes: (1) Composite front lower arm mount A must-have replacement to keep your XRAY suspension dialed and race-ready.    

Read more less

Fine-tune your suspension and lower the center of gravity with the Team Losi Racing 22X Carbon Fiber Front Shock Tower (-2mm). This optional tuning part is designed for racers looking to adjust front-end response and handling on the 22X 2WD buggy platform. Features & Benefits: Optional -2mm shock tower lowers front shock mounting points Carbon fiber construction for lightweight strength and rigidity Helps fine-tune suspension geometry and handling characteristics Precision cut for accurate fit and consistent performance Compatibility: Team Losi Racing 22X 2WD Buggy Includes: (1) -2mm Carbon Fiber Front Shock Tower A great tuning option for racers looking to dial in front-end feel and suspension performance on their 22X.    

Read more less

The ProTek RC Braided Brushless Motor Sensor Cable is a premium replacement sensor wire designed for sensor-based brushless motor systems that use removable sensor harnesses. Built for reliability and durability, this cable ensures clean, consistent signal transfer between your ESC and motor—race after race. Why You’ll Want It This cable uses individual silicone-shielded sensor wires wrapped in a black braided nylon sleeve, giving it excellent flexibility while protecting against abrasion, vibration, and shock. Shrink-wrapped ends keep everything secure and tidy, making it ideal for high-performance racing environments where reliability matters most. Features Compatible with most sensor-based brushless ESC & motor systems Individual silicone-shielded sensor wires for flexibility Braided nylon outer sheath for abrasion and impact protection Shrink-wrapped ends for durability and clean routing Smooth, reliable data transfer between ESC and motor Lightweight and race-proven design Specifications Length: 90mm Part Number: PTK-2107 Type: Brushless Motor Sensor Cable Wire Protection: Braided nylon sleeve with silicone-shielded internal wires Perfect for racers looking to replace a worn sensor wire or upgrade to a more durable, track-ready option that won’t hold your electronics back.

Read more less

The RC10B7 Gear Differential Cap is a genuine replacement part from Team Associated, designed to restore proper function and durability to your RC10B7 gear differential. Precision-molded for a perfect factory fit, this cap helps ensure consistent diff performance and reliability during racing or practice. Ideal for routine maintenance, rebuilds, or replacing worn or damaged components, it installs quickly with no modifications required. Features: Genuine Team Associated replacement part Precision fit for RC10B7 gear differentials Maintains proper differential operation and durability Direct drop-in installation Includes: (1) Gear Differential Cap Compatibility: Team Associated RC10B7 1/10 Buggy  

Read more less

The Team Associated B6 Front Hinge Pin Brace is a genuine replacement part designed to restore strength and alignment to the front suspension of your RC10 platform. Precision-molded for a direct factory fit, this brace securely holds the front hinge pins in place, helping maintain consistent suspension geometry and reliable handling. Ideal for maintenance, rebuilds, or replacing damaged components after hard racing or bashing, this hinge pin brace installs easily and keeps your front end tight and predictable. Features: Genuine Team Associated replacement part Maintains proper front suspension alignment Durable construction for racing and off-road use Direct drop-in fit with no modifications required Includes: (1) Front Hinge Pin Brace Compatibility: Team Associated RC10B6 Team Associated RC10B6D Team Associated RC10B6.1 Team Associated RC10B6.1 Factory Lite Team Associated RC10B6.1D Team Associated RC10B6.2 Team Associated RC10B6.2D Team Associated RC10B6.3 Team Associated RC10B6.3D Team Associated RC10B6.4 Team Associated RC10B6.4D Team Associated RC10 SC6.1 Team Associated RC10 T6.1

Read more less

Dial in your steering feel with the Team Associated Factory Team Adjustable KPI Steering Blocks for the RC10B7 and RC10B7D. Designed to work with the Factory Team Adjustable KPI Set (ASC92479), these steering blocks allow racers to fine-tune Kingpin Inclination (KPI) to match track conditions and driving style. This set includes both 3mm and 4mm trailing steering blocks, giving you multiple KPI adjustment options to optimize steering response, corner entry, and mid-corner stability. A must-have tuning option for competitive racers looking to extract maximum performance from their B7 platform. Features: Factory Team adjustable KPI steering block set Multiple KPI options for precise steering tuning Improves steering feel, response, and consistency Designed for use with Factory Team Adjustable KPI Set (ASC92479) Ideal for competitive off-road racing setups Includes: (1) Left 3mm trailing steering block (1) Right 3mm trailing steering block (1) Left 4mm trailing steering block (1) Right 4mm trailing steering block Compatibility: Team Associated RC10B7 Team Associated RC10B7D

Read more less

The Team Losi Racing TLR-1194 Front Sway Bars Set is an optional tuning upgrade for the 22X 2WD buggy platform. This Evens front sway bar set allows drivers to fine-tune front roll stiffness, helping balance steering response, corner entry feel, and overall chassis control for changing track conditions. A simple, effective tuning tool that works without altering springs or shock setup. 🔧 Features Genuine Team Losi Racing tuning option Front sway bar set for 22X 2WD buggy platforms Evens sway bar configuration Enables fine adjustment of front chassis roll and steering feel Ideal for adapting to different grip levels and layouts ⚙️ Tuning Effects Softer Sway Bar Increases chassis roll Increases cornering grip Decreases on-power steering Slower response in direction changes Stiffer Sway Bar Decreases chassis roll Decreases cornering grip Increases on-power steering Faster response in direction changes 📦 Includes (1) Front Sway Bars Set ✅ Compatibility Losi 22X  Losi 22X-T

Read more less

The Team Losi Racing TLR-1212 Rear Sway Bars Set is an optional tuning upgrade for the 22X 2WD buggy platform. This Evens sway bar set allows drivers to fine-tune rear roll stiffness to better suit track grip levels, driving style, and layout demands. A simple and effective way to adjust handling balance without changing springs or shock settings. 🔧 Features Genuine Team Losi Racing tuning option Rear sway bar set for 22X 2WD buggy platforms Evens sway bar configuration Allows fine adjustment of chassis roll and cornering response Ideal for adapting to changing track conditions ⚙️ Tuning Effects Softer Sway Bar Increases chassis roll Increases cornering grip Decreases on-power steering Slower response in direction changes Stiffer Sway Bar Decreases chassis roll Decreases cornering grip Increases on-power steering Faster response in direction changes 📦 Includes (1) Rear Sway Bars Set ✅ Compatibility Losi 22X Losi 22X-T

Read more less

Dial in your setup with absolute confidence! The 1UP Racing Pro Pit Scale delivers ultra-fine accuracy, making it the perfect tool for weighing parts, tires, diffs, hardware, and more. Whether you're chasing consistency, balancing components, or fine-tuning for race day, this compact powerhouse gives you the precision trusted by top-level racers. Engineered with a 0.01g resolution, 500g capacity, and a crisp blue backlit LCD, the Pro Pit Scale is built for serious tuning in any pit environment. A stainless steel weighing platform, laser-etched branding, and a protective cover complete the professional-grade feel. Key Features: ✔️ 0.01g Precision – High-resolution measurement for pro-level tuning✔️ 500g Capacity – Perfect for tires, diffs, hardware, and small components✔️ Stainless Steel Platform – Durable, stable, and easy to clean✔️ Blue Backlit LCD – Clear visibility in any lighting✔️ Laser-Etched 1UP Logos – Clean, premium aesthetic✔️ 9 Weighing Modes – Versatile for all hobby and workshop uses✔️ Full-Capacity Tare Range – Zero out trays or containers instantly✔️ Protective Cover & Parts Tray Included – Ready for pit bench or travel Includes: (1) 1UP Racing Pro Pit Scale (2) AA Batteries (1) Protective Cover / Parts Tray Specifications: Capacity: 500g (17.637oz) Resolution: 0.01g (0.00035oz) Overall Size: 5 × 4.17 × 0.74 in (127 × 106 × 19mm) Platform Size: 3.93 × 3.93 in (100 × 100mm)

Read more less

Upgrade your suspension precision with the AVID 13mm Ringer Shock Collar Kit, engineered to let you run 13mm springs on multiple shock platforms including Team Associated 13mm, TLR G3/3.5, and Schumacher LD3/L1R. Crafted for racers who demand accuracy and consistency, these collars feature offset laser-etched AVID logos that allow you to match spring tension left-to-right in clean ¼-turn increments. Machined with AVID’s signature silver ringer highlight, these collars not only perform—they look pro doing it. Features Compatible with 13mm springs across popular racing platforms Fits: AE 13mm, TLR G3/3.5, Schumacher LD3/L1R shock bodies Offset laser-etched AVID logos for easy visual alignment Allows perfect ¼-turn spring tension adjustments Internal o-ring design keeps collars firmly in place Signature silver ringer machining for premium finish Works great with AE V3, XRAY, and 1UP 13mm springs Tips Spring cups are not included.Recommended options:• AE 13mm Spring Cups – ASC91966• AE 12mm Spring Cups – ASC91814 (compatible with some setups) Includes (4) AVID 13mm Shock Collars (4) Internal O-Rings (pre-installed)  

Read more less

The 1RC Racing 1/18 Servo Extension Wire is a direct replacement part designed for the 1RC Racing 1/18 chassis lineup. Perfect for extending servo reach or cleanly routing wires through your setup, this high-quality extension ensures a secure, low-resistance connection between components. ⚙️ Features: Genuine 1RC Racing replacement part 100mm length for flexible installation Durable, high-quality wire construction for reliable signal transfer Ideal for clean wire management on your 1/18 scale setup 📦 Includes: (1) 1RC Racing 1/18 Servo Extension Wire (100mm)  

Read more less

Bring world-class aerodynamics to your XRAY XB2 2025 buggy with the JConcepts “P2” Body, evolved from the legendary Punisher shell and refined through years of championship-winning performance. Trusted by top pros like Spencer Rivkin and Dakotah Phend, this body is designed for racers who demand speed, balance, and precision on every surface. ⚙️ Features: Forward cab design with recessed windshield and vertical rails for maximum front-end stability Signature center fin improves tracking through jumps and high-speed corners Double winglets ahead of rear tires enhance downforce and side-bite Chamfered side-pods deliver a sharp, modern look and smooth airflow Precision fit around the XRAY spur-gear guard — no trimming guesswork Includes two 6.5-inch wings ideal for carpet, turf, or dirt setups Comes with window masks, protective film, and full decal sheet 📏 Specifications: Part Number: 0691 Vehicle Compatibility: XRAY XB2 2025 1/10 2WD Buggy Material: Clear polycarbonate (unpainted) Body Thickness Options: Standard / Lightweight Wings Included: (2) 6.5-inch carpet / turf / dirt style 📦 Includes: (1) XRAY XB2 2025 “P2” Clear Body (2) JConcepts Wings (1) Decal Sheet (1) Window Mask Set 💡 Pro Tip:For the ultimate setup, pair the P2 body with JConcepts Aero Front Wings to create a balanced, high-downforce aero package proven at the IFMAR World Championships.

Read more less

Avid Oiler Pen | Empty [AV10135] Product Overview: The Avid Empty Oiler Pen gives you full control over your lubrication needs. Originally used for Avid Slip oil, this handy tool now comes empty—ready to be filled with your favorite lubricant. It features a precision 1" (25.4mm) long steel tip for clean and accurate application and holds up to 1/4oz (7.4cc) of fluid. A perfect companion for any RC tool kit or pit box. Features: Comes empty – fill with your preferred lubricant Precision 1" steel tip for controlled application Holds up to 1/4oz (7.4cc) of fluid Compact, pit-friendly size Includes: (1) Empty Avid Oiler Pen Part Number: AV-OIL-PEN

Read more less

Durable factory replacement for the XB2 1/10 Buggy Overview:The XRAY XB2 Hard Graphite Composite Rear Suspension Arm delivers race-proven durability and precision handling for your XB2 1/10 buggy. Manufactured from XRAY’s exclusive hard graphite-reinforced composite, this arm provides the perfect balance of stiffness and flex—ideal for high-traction surfaces and competitive racing. About the Rear Suspension ArmThis left-side rear arm features XRAY’s signature design for smooth suspension movement and maximum impact strength. The hard graphite material improves cornering consistency and reduces flex under load, providing a more responsive feel and better traction balance across a range of track conditions. Features: Genuine XRAY Factory Team part Hard graphite composite for increased stiffness and reduced flex Provides improved steering precision and consistent cornering Ideal for high-grip indoor and outdoor tracks Precision-molded for perfect fit and geometry Lightweight yet highly durable construction Specifications: Part Type Rear Suspension Arm (Left) Material Hard Graphite Composite Vehicle Compatibility XRAY XB2 1/10 2WD Buggy Position Rear – Left Side Includes: (1) Hard Graphite Composite Rear Suspension Arm (Left)

Read more less

Push performance to the limit with this 2S 7.4V 6500mAh 160C Low-Profile Stick Pack, engineered with the best proprietary LiPo cells available. Designed for racers who demand the absolute maximum in power delivery, voltage consistency, and reliability, this pack delivers explosive acceleration with cool, stable performance. 🔥 Key Features: High-output 160C discharge rating for extreme current delivery Built with premium proprietary LiPo cells — top-tier performance and reliability Low-profile stick pack design for improved weight balance Ideal for high-demand race setups and competition use Precision-matched cells for consistent voltage under load ⚙️ Specifications: Voltage: 7.4V (2S) Capacity: 6500mAh Discharge Rate: 160C Dimensions: 22mm (H) x 47mm (W) x 139mm (L) Connector: 5mm bullet Weight: 279g 📦 Includes: (1) 2S 7.4V 6500mAh 160C LP Stick Pack 🛡️ Warranty: 90-day manufacturer’s warranty against defects ⚠️ Tip:Always balance charge and monitor pack temperature during use. Avoid over-discharging — maintain cells above 3.2V for best longevity.

Read more less

Refresh your drivetrain with the Factory Team DCV (Dual CVA) Rebuild Kit. Designed to restore smooth power delivery, this kit includes all the small but critical parts needed to service and maintain your dual CVA driveshafts for long-lasting, race-ready performance. 🔥 Key Features: Complete rebuild kit for Factory Team Dual CVA driveshafts Restores smooth, efficient drivetrain operation Precision parts built to Team Associated factory standards Extends the life of your DCV driveshaft assemblies Essential maintenance item for serious racers ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 series RC10B6D / B6.1D / B6.2D / B6.3D SC6.1 / SC6.2 T6.1 / T6.2 Touring Car (TC6.2, TC7.1, TC7.2, TC7.4) 📦 Includes: (2) Cross Pins (2) Barrels (2) Set Screws (2) O-Rings ⚠️ Tip:Inspect DCV components regularly—replace worn barrels and pins early to prevent axle or bone damage.

Read more less

Keep your suspension smooth and precise with the Team Associated Hinge Pin Set. Designed to replace worn or bent pins, this complete set provides the exact lengths and diameters needed for secure suspension arm mounting and consistent handling. 🔥 Key Features: Factory-spec hinge pins for suspension arm pivots Hardened steel construction for strength and durability Direct replacement for stock pins Maintains correct suspension geometry Essential maintenance item for serious racers ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 series RC10B6D / B6.1D / B6.2D / B6.3D SC6.1 / SC6.2 T6.1 / T6.2 Touring Car (TC6.2, TC7.1, TC7.2, TC7.4) 📦 Includes: Complete set of front and rear hinge pins (various lengths) ⚠️ Tip:Always check hinge pins after crashes—bent pins can cause binding and poor handling. Replace as needed to keep suspension moving freely.

Read more less

Optimize rear-end stability and durability with the RC10B6.2 Rear Hubs from Team Associated. Designed for high-performance racing, these molded composite hubs provide the perfect balance of strength, adjustability, and weight for 1/10 scale 2WD competition buggies. 🔥 Key Features: Molded composite construction for durability and weight savings Provides secure and precise fitment for rear axles and bearings Designed for high-performance rear suspension geometry Includes mounting locations for vertical ball stud height adjustments ✅ Compatibility: RC10B6.2 RC10B6.2D RC10B6.3 / B6.3D (backwards compatible) Also fits other B6-series vehicles with compatible rear hub geometry 📦 Includes: (1) Left Rear Hub (1) Right Rear Hub ⚠️ Note:Use with Team Associated’s tuning inserts and vertical ball stud hardware for full adjustability.

Read more less

Upgrade your RC10B6.3’s drivetrain with the Heavy Duty (HD) Slipper Spring and Adapters from Team Associated. Engineered for improved durability and consistent slipper performance, this set is ideal for racers pushing their vehicles to the limit on high-traction surfaces. 🔥 Key Features: Heavy duty slipper spring for increased pressure and durability Includes updated slipper adapters for optimized fit and function Designed for smoother and more consistent slipper operation Direct replacement for the stock B6.3 slipper components ✅ Compatibility: RC10B6.3 RC10B6.3D May also fit other RC10B6-series models with similar slipper configurations 📦 Includes: (1) HD Slipper Spring (2) Slipper Adapters ⚠️ Note:Ensure proper slipper assembly for optimal performance. Refer to your vehicle’s manual for installation instructions.

Read more less

Upgrade your shocks with the XRAY Aluminum Shock Cap Nuts. Machined from premium Swiss 7075 T6 aluminum, these cap nuts include a precision vent hole that allows trapped air to escape during assembly for smoother and more consistent shock performance. Features: CNC-machined from high-quality Swiss 7075 T6 aluminum Integrated vent hole for bubble-free shock bleeding Designed for Big Bore shocks Hard-anodized finish for long-lasting durability Lightweight design without sacrificing strength Includes: (2) Aluminum Shock Cap Nuts with Vent Hole Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) XRAY XB4 (4WD Buggy) Other XRAY models equipped with Big Bore shocks (check manual)

Read more less

Secure your batteries with confidence using the XRAY Composite LiPo Battery Holder – Long. Precision-molded from premium XRAY composite, these holders are lightweight yet durable, ensuring a snug fit and reliable hold during even the most aggressive racing. The long version is designed for extended-size LiPo packs, offering proper alignment and security in your chassis layout. Features: Includes 2 front & 2 rear holders Long design for extended-size LiPo battery packs Molded from high-quality XRAY composite material Keeps batteries secure under high loads and impacts Lightweight and easy to install Compatibility: XRAY XB2 – 1/10 2WD Buggy (all versions, long battery layout) XRAY XT2 – 1/10 2WD Stadium Truck (all versions, long battery layout) XRAY XB4 – 1/10 4WD Buggy (check manual for pack fitment) Part Number: 326176-L      

Read more less

Upgrade your XB2 with the XRAY Carbon Rear Shock Tower (4-Dots) for precision handling and durability. Made from high-quality carbon fiber, this shock tower provides the perfect balance of strength and lightweight performance. The 4-dot design gives you multiple shock mounting options, making it easy to fine-tune your suspension for any track condition. Features: Premium carbon fiber construction – lightweight yet rigid 4-dot design for expanded shock mounting adjustability Improves rear suspension tuning and consistency Factory XRAY precision fit and finish Direct replacement for stock rear shock tower Compatibility: XRAY XB2 (all versions requiring 4-dot rear tower) Includes: (1) Carbon Rear Shock Tower – 4-Dots

Read more less

Fine-tune your steering geometry with XRAY’s precision-machined Graphite Steering Block Extension Plates. Available in 1-dot, 2-dot, and 3-dot options, these lightweight graphite plates let you adjust steering response and handling characteristics to match your track and driving style. Features: Made from high-quality graphite for strength and precision Adjusts steering geometry for optimal handling Lightweight, durable construction Direct fit for XB2 & XT2 platforms Includes 2 extension plates per set Dot Options (choose your setup): 1-Dot (322294): Minimal extension – smooth, stable steering 2-Dot (322295): Balanced setting – great all-around response 3-Dot (322296): Maximum extension – aggressive steering feel Compatibility: XRAY XB2 (all versions) XRAY XT2 (all versions) Includes: (2) Graphite Steering Block Extension Plates (select 1-dot, 2-dot, or 3-dot version)

Read more less

Upgrade your steering setup with XRAY’s Graphite Composite C-Hubs for the XB2. Available in Right (322210-G) or Left (322220-G), these hubs are molded from high-strength graphite composite material for improved stiffness, precision, and durability over standard composite parts. Features: Strong graphite composite construction Improves steering precision & consistency Direct replacement for stock XB2 C-hubs Available in Right or Left version Compatibility: XRAY XB2 (all versions) Other XRAY platforms using XB2 C-hubs Includes (choose option): (1) Right C-Hub – 322210-G (1) Left C-Hub – 322220-G

Read more less

Upgrade your XRAY XB2 with this Hard Composite Front Lower Left Suspension Arm featuring Low Shock Mounting (LSM) geometry. Designed for maximum durability and precision, this arm is ideal for high-traction conditions where reduced flex translates into improved consistency and cornering stability. Features: Hard composite construction for increased stiffness Low Shock Mounting design for improved suspension geometry and handling Factory precision molding for perfect fitment Direct replacement part for easy installation Compatibility: XRAY XB2 (All variants using LSM geometry) Includes: (1) Front Lower Left Suspension Arm – Hard

Read more less

The XRAY XB2 Hard Composite Front Suspension Arm (Right, Lower, Low Shock Mounting) is molded from specially-formulated hard composite material for maximum durability and precise handling. The low shock mounting design lowers the shock position for a more stable setup and improved cornering performance, especially on high-traction tracks. Features: Hard composite material for maximum stiffness and durability Low shock mounting for enhanced stability and cornering Precision-molded for perfect fit and geometry Factory replacement XRAY part Compatibility: XRAY XB2 (all versions, right side front lower arm)

Read more less

The XRAY XB2 Differential Gasket Set includes four precision-cut gaskets designed for use in the XB2 gear differential. These gaskets provide a tight, consistent seal to prevent oil leakage and ensure smooth, reliable diff performance. Perfect for rebuilds or routine maintenance, they help extend the life of your differential while maintaining peak performance. Features: Precision-cut gaskets for perfect sealing Prevents oil leaks and maintains smooth diff action Durable material for long-lasting reliability Essential for rebuilds and maintenance Designed for XRAY XB2 vehicles Includes:(4) Differential Gaskets    

Read more less

The XRAY XB2 Composite Idler Gear is the direct replacement 25-tooth idler gear for the XB2 1/10 scale buggy. Precision molded for durability and smooth drivetrain operation, this gear keeps your XB2 running strong with consistent performance. Features: Genuine XRAY replacement part Composite construction for strength and low wear Smooth, efficient power transfer 25-tooth idler gear Compatibility: XRAY XB2 1/10 Buggy Includes: (1) 25T Composite Idler Gear  

Read more less

Exalt Z-RoX 21.5T Fixed Timing Spec Motor – 30° Locked TimingPart #: EXA1215LT 🔧 Zero excuses. Just skill. The Exalt Z-RoX 21.5T motor delivers pure spec racing performance with locked 30° timing to keep the playing field level and the racing tight. Engineered for consistency and built to last, it’s the motor that puts driving and setup back in the spotlight—right where it belongs. 🏁 Features: Fixed 30° timing for locked-in fairness 21.5T winding – designed for true spec-class performance 100% rebuildable with tight QC tolerances Optional 40° & 50° endplates available (sold separately) Sleek, aggressive design – looks fast, runs faster Ideal for clubs, promoters, and competitive racers 📦 The spec is in the motor—not in the margins.Leave the tweaking behind. With Z-RoX, your performance speaks for itself.

Read more less

Upgrade your suspension with Team Losi Racing's 5.8mm Titanium Ball Studs. These precision-machined components are built from ultra-lightweight, high-strength titanium to deliver maximum performance with minimal weight—ideal for racers chasing every competitive edge. 🔧 Features: Machined from lightweight titanium for reduced weight Corrosion-resistant for long-lasting performance 5.8mm ball with 6mm thread length Hex-compatible head for easy installation and adjustment Perfect for fine-tuning suspension geometry under high loads 📦 Includes: (2) 5.8mm Titanium Ball Studs (6mm thread) ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Upgrade your rear suspension geometry with the JConcepts Aluminum HRC "D Block" Arm Mount. Designed for the RC10B7/B7D, this mount raises the hinge pin height for a higher roll center, offering improved stability and cornering response on high-traction surfaces. Built from premium 7075 aluminum, it's strong, precise, and ready for race-day abuse. Features:• Raises hinge pins for High Roll Center (HRC) tuning• Precision-machined 7075 aluminum construction• Compatible with Team Associated pill inserts• Enhances control over toe, anti-squat, and wheelbase• Lightweight and race-proven design• Anodized finish in your choice of blue or black• Laser-etched JConcepts logo and chamfered edges for a clean, factory look Includes (1) Aluminum HRC “D Block” mount. A must-have for advanced buggy setups.

Read more less

Team Associated RC10T6.2 Carbon Fiber +1mm Steering Arm (2) – 71144Upgrade your steering precision with these lightweight +1mm carbon fiber arms from Team Associated. Originally made for the RC10T6.2, but may also fit newer models (check compatibility). ✅ Carbon Fiber Construction – Lightweight and durable✅ +1mm Offset – Provides fine-tuned steering response✅ Direct Replacement – Easy bolt-on upgrade 📦 Includes:(2) +1mm Carbon Fiber Steering Arms Perfect for racers looking to sharpen handling and dial in front-end feel.

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Stronger. Stiffer. Race-Ready. Upgrade your steering and camber links with the Team Associated 3.5x48 mm Steel Turnbuckles — a precision-built Factory Team option for racers who demand maximum strength and reliability. Perfect for high-stress race conditions, these heavy-duty steel links add confidence to every corner and landing. Performance Upgrade Designed to replace standard turnbuckles on the RC10B6, RC10T6, and RC10SC6 platforms, this 3.5 mm version provides added stiffness and durability when used with 3.5 mm ballcups (92308). The result is tighter handling, smoother steering response, and reduced flex over time — a must-have for competitive racers and bashers alike. Features: Heavy-duty 3.5 mm steel construction for extreme strength Increased stiffness for consistent steering geometry Works with 3.5 mm ballcups (#92308) Ideal upgrade for high-traction and high-impact racing Factory Team precision fit and finish Includes: (2) 3.5 × 48 mm Steel Turnbuckles Compatibility: Team Associated RC10 B6 series Team Associated RC10 T6 series Team Associated RC10 SC6 series Team Associated Factory Team — Engineered to Win.

Read more less

Team Associated RC10B7 FT Adjustable KPI Set – ASC92479 Fine-Tune Your Front End for Any Track Condition The Factory Team Adjustable KPI (KingPin Inclination) Set gives you race-proven steering geometry flexibility for your RC10B7. Originally featured on prototype models, this advanced tuning option is now available to all racers looking to optimize handling for different surfaces—from low-grip dirt to high-traction clay or carpet. ⚙️ Features: ✅ Precision adjustable KPI set for RC10B7 ✅ Nine distinct KPI settings for optimal tuning range ✅ Includes 3mm and 4mm trailing steering blocks ✅ Enhance corner entry, steering feel, and overall stability ✅ Factory Team engineered for high-level performance 📦 Includes: (2) Adjustable KPI Steering Blocks (1) 3mm Trailing Block Set (1) 4mm Trailing Block Set (Kit Default) Supplement with setup steps and KPI values ✅ Compatibility: RC10B7 🏁 Elevate your steering control and tailor your B7 to any surface with this ultimate front-end tuning kit!

Read more less