⚙️ Precision-Engineered Power. Made in the USA. The Avid RC Triad 69-Tooth Spur Gear is built exclusively for the Avid Triad Slipper Clutch System, delivering ultra-smooth, ultra-quiet performance with unmatched durability. Crafted from Avid’s custom-blend low-noise material, this gear eliminates the harsh sound of standard fiberglass spurs while offering three times the impact strength of Delrin — all in a perfectly balanced, true-spinning design. ⚡ Features: 🇺🇸 Made in the USA from a proprietary high-strength plastic — zero glass fibers for low noise and maximum toughness 🔇 Ultra-quiet operation with 3× the impact strength of Delrin 🌀 Precision 48-pitch tooth form provides smooth rolling and consistent mesh 🎯 Centerpoint injection-molded for perfect balance and true rotation 🧩 Number of teeth molded in for easy identification 🔢 Marked with “1” and “2” for single- or dual-plate Triad clutch setup compatibility 🧠 Designed exclusively for use with the Avid Triad Slipper Clutch System 📏 Specifications: Pitch: 48P Tooth Count: 69T Compatibility: Avid Triad Slipper Clutch System (Stock or Mod Kit) Part Number: AV1020-69 💡 Pro Tip:Keep a few different Triad spur sizes (66T–87T range) on hand so you can fine-tune your gearing for any track layout or motor setup.  

Read more less

Precision Fit. Proven Strength. Upgrade your suspension geometry with the Team Associated Factory Team Aluminum 3-Gear Gearbox Arm Mount “C” Block. Designed for the RC10B7, B7D, T7, and SC7 platforms, this CNC-machined aluminum mount provides superior strength, precise alignment, and long-lasting durability under the toughest racing conditions. Factory-Grade Performance Engineered to maintain suspension integrity and reduce flex, this aluminum “C” block ensures consistent handling through high-speed corners and rough landings. Whether you’re chasing podiums or fine-tuning setup precision, this component delivers the reliability and performance serious racers expect from Team Associated. Features: CNC-machined aluminum construction for maximum rigidity and precision fit Designed for 3-gear gearbox setups Improves consistency and handling through rough terrain Factory Team engineering for professional-grade reliability Direct replacement for stock “C” block Includes: (1) Aluminum 3-Gear Gearbox Arm Mount “C” Block Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D Team Associated RC10 T7 Team Associated RC10 SC7 Team Associated Factory Team — Engineered to Win.

Read more less

  Power your precision RC builds with the Futaba 4PM Plus, a 4-channel radio system offering industry-leading reliability and features. Paired with the R304SB‑E telemetry-enabled receiver, this combo delivers low-latency performance, fine control, and telemetry feedback—perfect for high-end cars, boats, and surface vehicles. 🎯 Key Features Futaba T‑FHSS 2.4 GHz Modulation: Ultimate signal stability and ultra-low latency 4PM Plus Transmitter: Sleek, ergonomic form factor with a full-color display and intuitive button layout Built-in Telemetry: Monitor battery voltage, temperature, signal quality, and more in real time Multi-Model Memory: Store up to 40 models with easy menu navigation Eight-Way End-Point Adjust, Adjustable LED Lighting, Dual Rates & Expo 📦 What’s Included (1) Futaba 4PM Plus Radio Transmitter (1) R304SB‑E Telemetry Receiver (1) Futaba Neo™‑T Stick (Right-hand) (2) Studio‑Style Recess Covers User Manual ⚙️ Specifications Feature Specification Range Full-range 2.4 GHz Channels 4 (expandable via mixing) Model Memory Up to 40 models User Interface High-contrast color screen Telemetry Compatible with S.Bus equipment Power 6x AA batteries or rechargeable Button Layout 6 customizable switches Elevate your control precision with Futaba’s trusted tech—perfect for the racer or enthusiast who demands tight response, full telemetry integration, and serious reliability. 🚀

Read more less

Experience unmatched power and consistency with the NitroPro 2S 7.4V 8500mAh 140C Low-Profile Stick Pack. Built from the highest-grade proprietary cells available, this battery delivers blistering acceleration, rock-solid voltage retention, and the endurance top racers demand. 🔥 Key Features: High-output 140C continuous discharge for extreme performance Constructed from premium proprietary LiPo cells — maximum punch and reliability Low-profile stick pack design for optimal chassis balance Consistent voltage under heavy load for competitive racing conditions Built to exceed the demands of professional-level drivers ⚙️ Specifications: Voltage: 7.4V (2S) Capacity: 8500mAh Discharge Rate: 140C Dimensions: 25mm (H) x 47mm (W) x 139mm (L) Connector: 5mm bullets Weight: 319g 📦 Includes: (1) NitroPro 2S 7.4V 8500mAh 140C LP Stick Pack 🛡️ Warranty: 90-day manufacturer’s warranty against defects ⚠️ Tip:Balance-charge every cycle and avoid over-discharging (keep cells above 3.2V) for maximum performance and lifespan.

Read more less

Push performance to the limit with this 2S 7.4V 6500mAh 160C Low-Profile Stick Pack, engineered with the best proprietary LiPo cells available. Designed for racers who demand the absolute maximum in power delivery, voltage consistency, and reliability, this pack delivers explosive acceleration with cool, stable performance. 🔥 Key Features: High-output 160C discharge rating for extreme current delivery Built with premium proprietary LiPo cells — top-tier performance and reliability Low-profile stick pack design for improved weight balance Ideal for high-demand race setups and competition use Precision-matched cells for consistent voltage under load ⚙️ Specifications: Voltage: 7.4V (2S) Capacity: 6500mAh Discharge Rate: 160C Dimensions: 22mm (H) x 47mm (W) x 139mm (L) Connector: 5mm bullet Weight: 279g 📦 Includes: (1) 2S 7.4V 6500mAh 160C LP Stick Pack 🛡️ Warranty: 90-day manufacturer’s warranty against defects ⚠️ Tip:Always balance charge and monitor pack temperature during use. Avoid over-discharging — maintain cells above 3.2V for best longevity.

Read more less

Unleash extreme power and efficiency with the Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery. Engineered for competitive RC racing, this pack combines massive capacity, ultra-low internal resistance, and a high 140C discharge rate to deliver stable voltage, explosive acceleration, and unmatched endurance. Perfect for racers who demand consistent performance through the entire run. 🔥 Key Features: High Voltage (LiHV) 7.6V output for maximum speed and power 140C continuous discharge for exceptional punch and consistency 8500mAh capacity delivers long runtime and balanced weight Factory-matched cells for uniform voltage, capacity, and resistance Low IR design ensures stable voltage under heavy load 5mm bullet connectors provide secure, low-loss connections Built using stable automatic stacking technology for reliability Lightweight and low-profile design for chassis balance and fit 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 8500mAh Continuous Discharge: 140C Charge Rate: 1C (8.5A max recommended) Configuration: 2S1P Watt Hours: 64.4Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 139 × 47 × 25mm Weight: 10.65oz (302g) ✅ Compatibility: Ideal for 1/10 & 1/8 scale surface applications Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher racing platforms Works with Touring Car (TC6/TC7 series), 4WD Buggies, Truggies, and Short Course Trucks requiring 2S packs 📦 Includes: (1) Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always balance charge using a LiPo-compatible charger and LiPo safe bag. Never leave charging batteries unattended. Do not overcharge or discharge below 3.2V per cell. Allow batteries to cool completely before recharging. Follow proper break-in procedure for new packs (first 5 cycles at 50% discharge). 🏎️ Recommended For: 1/10 & 1/8 scale Buggy, Truggy, Touring Car, and Short Course Truck racing Ideal for spec and modified classes needing high voltage and long runtime

Read more less

Experience uncompromising power and consistency with the Gens Ace Redline 2.0 2S Shorty LiHV Battery. Designed for high-performance racing, this pack delivers exceptional punch, low internal resistance, and stable voltage from start to finish. Perfect for 1/10 scale off-road, on-road, and touring applications where balance and efficiency are critical. 🔥 Key Features: High Voltage (LiHV) 7.6V design for increased power output 140C discharge rate for explosive acceleration and sustained punch 5300mAh capacity delivers both power and endurance Factory cell matching ensures maximum performance and consistency Low internal resistance (IR) for stable voltage under load Compact shorty pack size for ideal chassis weight distribution 5mm bullet connectors for secure, low-resistance connections Built with stable automatic stacking technology and strict cell matching Lightweight and low-profile design for racing efficiency 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 5300mAh Continuous Discharge: 140C Charge Rate: 1C (5.3A max recommended) Configuration: 2S2P Watt Hours: 40.28Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 96 × 47 × 22.5mm Weight: 7.02oz (199g) ✅ Compatibility: Ideal for 1/10 scale off-road and on-road racing Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher chassis setups Compatible with Touring Car (TC6/TC7) platforms and other vehicles using 2S shorty packs 📦 Includes: (1) Gens Ace Redline 2.0 2S Shorty LiHV 5300mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always use a LiPo-compatible charger — never charge unattended. Always balance charge and use a LiPo Safe charging bag. Do not overcharge, over-discharge, or store above 35°C. Allow battery to cool before recharging after use. For best cycle life: charge fully before first use and discharge only 50% for first 5 cycles. 🏎️ Recommended For: 1/10 Scale Buggy, Stadium Truck, Short Course Truck, and Touring Car racing Perfect balance of voltage, runtime, and punch for both spec and modified classes

Read more less

Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty – High-Performance, Low-Profile Power! Maximize your racing potential with the Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty HV-LiPo, engineered with cutting-edge advancements in LiPo cell manufacturing and battery construction. Designed for elite on-road and off-road competition, this battery delivers higher power output, lower internal resistance, and increased durability, ensuring consistent voltage from start to finish. Key Features: ✅ State-of-the-Art LiPo Chemistry – Improves efficiency, reliability, and power output.✅ High-Voltage (HV) 7.6V Design – Safely charges to 4.35V/cell for maximum performance.✅ Flat Discharge Curve – Sustains higher voltage deeper into the race for consistent power delivery.✅ High Capacity & 135C Discharge Rate – Delivers explosive acceleration and extended runtime.✅ Durable Hard Case – Protects against damage in high-impact racing environments.✅ Low-Resistance Embedded Connectors – Minimizes power loss for peak efficiency.✅ ROAR & BRCA Approved – Legal for competitive racing.✅ Male ESC Connectors Included – Ensures plug-and-play compatibility. Precision Power for Competitive Racing! 🏁 Why Choose the Reedy Zappers SG6 4000mAh? Low-profile (LP) design for better weight distribution and improved handling. Higher voltage retention throughout the race ensures stronger acceleration and consistent performance. Ideal for both on-road & off-road racing, including 1/8 eBuggy and 1/10 scale competition. Proven durability and extended cycle life for long-lasting, race-winning performance. 🔥 Race with confidence using the Reedy Zappers SG6 – built for champions! Specifications: Capacity: 4000mAh Voltage: 7.6V (2S) Max Charge Rate: 8.0A Discharge Rate: 135C Dimensions: 95.8mm x 46.8mm x 18.5mm Weight: 162g Socket: 5mm Bullet Connectors In the Box: (1) Reedy Zappers SG6 4000mAh 135C 7.6V LP 2S Shorty HV-LiPo Battery (1) Set of Male ESC Connectors Race-Proven Power & Reliability! The Reedy Zappers SG6 4000mAh 135C LP Shorty is designed for racers demanding high-voltage, low-profile performance. Whether you're competing in tight indoor tracks or wide outdoor circuits, this power-dense battery delivers the speed, consistency, and durability needed to win. 🔥 Upgrade your setup today and experience next-level power with Reedy Zappers SG6! 🏁💨

Read more less

Optimize rear-end stability and durability with the RC10B6.2 Rear Hubs from Team Associated. Designed for high-performance racing, these molded composite hubs provide the perfect balance of strength, adjustability, and weight for 1/10 scale 2WD competition buggies. 🔥 Key Features: Molded composite construction for durability and weight savings Provides secure and precise fitment for rear axles and bearings Designed for high-performance rear suspension geometry Includes mounting locations for vertical ball stud height adjustments ✅ Compatibility: RC10B6.2 RC10B6.2D RC10B6.3 / B6.3D (backwards compatible) Also fits other B6-series vehicles with compatible rear hub geometry 📦 Includes: (1) Left Rear Hub (1) Right Rear Hub ⚠️ Note:Use with Team Associated’s tuning inserts and vertical ball stud hardware for full adjustability.

Read more less

Overview:Upgrade your suspension durability and precision with the Team Associated RC10B7 Aluminum Arm Mount "D Block". Machined from high-quality aluminum, this mount improves rigidity in the rear suspension assembly, keeping your hinge pins firmly aligned under heavy loads. It’s a race-proven upgrade that enhances consistency, handling, and longevity compared to the stock composite part. Features: CNC-machined aluminum construction for superior strength Maintains precise hinge pin alignment for consistent handling Blue anodized finish for durability and Factory Team looks Direct replacement upgrade for the stock “D Block” Genuine Team Associated Factory Team component Compatibility: Team Associated RC10B7 1/10 2WD Buggy May also fit other B7-based platforms (check manual for details) Includes: (1) Aluminum Arm Mount "D Block" Part Number: 92433 ⚡ Pro Tip: Combine the Aluminum Arm Mount "D Block" with the B7 Factory Team Arm Mount Inserts (92434) to unlock fine-tuned rear suspension geometry options.

Read more less

1up Racing Curved Glue Tips feature a steel tip which is easy to unclog for extended use. A single tip can last the life of a bottle of glue! Universal fit. For use with thin viscosity CA glue. Package includes ten tips.

Read more less

Overview:Introducing the 1up Racing 7075 Aluminum Locknuts (M3) – the ultimate combination of strength, style, and lightweight performance. Precision-crafted from high-quality 7075 aluminum, these locknuts deliver the durability you need while saving weight where it counts. Each nut features a tight-fitting nylon insert that locks in place to keep everything secure, even under extreme R/C racing conditions. Choose from 10 bold anodized colors to match your build’s style and make your ride stand out! Features: Includes 8 locknuts per package Premium 7075 aluminum construction for strength and lightweight performance 5.5mm outer hex for easy installation M3 x 0.5mm threads (fits standard M3 hardware) Nylon lock inserts prevent loosening over time Available in 10 stunning anodized finishes for maximum style Compatibility: Fits most 1/10 and 1/8 scale R/C applications requiring M3 locknuts Perfect for off-road buggies, stadium trucks, touring cars, crawlers, drones, and more

Read more less

Boost your efficiency with the XRAY Slipper Eliminator Composite Spur Gear. Designed to work seamlessly with the XRAY Slipper Eliminator system, this 69T / 48 pitch spur gear offers reduced weight, smooth power transfer, and dependable durability. Made from XRAY’s premium composite material, it provides a perfect balance of strength and low rotational mass. Features: High-strength composite construction for maximum durability Lightweight design reduces drivetrain drag Precision molded for smooth and quiet operation Intended for use with the XRAY Slipper Eliminator Set Compatibility: XRAY XB2 – 1/10 2WD Buggy (all versions, check manual for gearing) XRAY XT2 – 1/10 2WD Stadium Truck (all versions, check manual for gearing) Part Number: 325869      

Read more less

Upgrade your drivetrain for maximum efficiency with the XRAY Slipper Eliminator LCG Ultra-Lightweight Set. Designed for serious racers, this setup completely eliminates the traditional slipper clutch, reducing rotating mass and delivering a more direct throttle response. Perfect for high-traction conditions where a slipper is not required. Features: Ultra-lightweight design reduces rotating mass for quicker acceleration LCG (Low Center of Gravity) construction enhances balance and stability Provides more consistent power transfer and improved efficiency Precision-machined for a perfect fit with XRAY driveline components Complete set includes everything needed for installation Compatibility: XRAY XB2 – 1/10 2WD Buggy (all versions, check manual for specifics) XRAY XT2 – 1/10 2WD Stadium Truck (all versions, check manual for specifics) Part Number: 324103  

Read more less

Fine-tune your XB2’s rear-end handling with the XRAY Short Rear Anti-Roll Bar series. Designed for precision adjustment, these sway bars control body roll and improve cornering stability, giving you the flexibility to adapt your buggy to any track condition. A softer bar provides more rear grip and smoother steering response, while a stiffer bar sharpens steering and reduces rear traction. Choose the perfect thickness to match your setup! Available Sizes: 1.0mm (323490) – Softest 1.1mm (323491) 1.2mm (323492) 1.3mm (323493) 1.4mm (323494) 1.6mm (323496) – Hardest Effects of Rear Roll Bar Changes: Softer Bar: Increases chassis roll Increases rear grip in corners Decreases on-power steering Car responds more slowly to direction changes Stiffer Bar: Decreases chassis roll Decreases rear grip in corners Increases on-power steering Car responds quicker to direction changes Features: High-quality spring steel construction Short design for precise handling response Essential tuning part for competitive setups Compatibility: XRAY XB2 (All Versions) Includes: (1) Short Rear Anti-Roll Bar (size selected)    

Read more less

The XRAY Composite Rear Upright (Lower Position – Graphite) is designed to provide precise handling and durability for your XB2/XB4. The lower roll center mounting gives improved cornering stability, making it an excellent choice for high-traction tracks where control and consistency are key. Features: Graphite composite material for maximum strength and rigidity Lower roll center mounting improves rear traction and stability Designed for high-traction surfaces and competitive setups Precision XRAY engineering ensures perfect fit and long life Compatibility: XRAY XB2 XRAY XB4 Includes: (1) Composite Rear Upright – Lower Position – Graphite

Read more less

Fine-tune your XB2 with this Graphite Composite Front Left Suspension Arm featuring Low Shock Mounting (LSM) geometry in the short configuration. The Graphite blend offers the perfect balance of rigidity and controlled flex, making it ideal for medium to high-traction tracks where precision and cornering speed are key. Features: Graphite composite material for optimized stiffness and responsiveness Low Shock Mounting (LSM) design improves suspension geometry and handling Short length design for sharper steering response Factory XRAY precision molding for perfect fit Compatibility: XRAY XB2 (All variants using LSM geometry) Includes: (1) Front Left Suspension Arm – Short – Graphite

Read more less

The XRAY XB2 Graphite Front Suspension Arm (Right, Short, Low Shock Mounting) is crafted from graphite composite material to deliver the perfect balance of strength, stiffness, and responsiveness. The short design improves steering response and corner speed, while the low shock mounting provides increased stability on high-traction tracks. Features: Graphite composite material for enhanced stiffness and precision Short design improves steering response and agility Low shock mounting (LSM) for greater stability and cornering performance Precision-molded factory replacement part Compatibility: XRAY XB2 (all versions, right side front lower short arm)

Read more less

The XRAY Composite 48P Slipper Eliminator Spur Gear is a precision-molded 72-tooth spur designed for racers who prefer maximum efficiency and direct power delivery. By eliminating the slipper assembly, this gear reduces rotating mass and ensures a more consistent throttle response, making it ideal for high-traction surfaces where a slipper is not required. Features: 48 pitch, 72-tooth composite spur gear Eliminates slipper clutch for direct drive efficiency Lightweight, precision-molded construction Delivers consistent throttle response Perfect for high-traction racing conditions Includes:(1) 72T Slipper Eliminator Spur Gear      

Read more less

The XRAY XB2 Composite Idler Gear is the direct replacement 25-tooth idler gear for the XB2 1/10 scale buggy. Precision molded for durability and smooth drivetrain operation, this gear keeps your XB2 running strong with consistent performance. Features: Genuine XRAY replacement part Composite construction for strength and low wear Smooth, efficient power transfer 25-tooth idler gear Compatibility: XRAY XB2 1/10 Buggy Includes: (1) 25T Composite Idler Gear  

Read more less

Maximize efficiency and longevity with the Team Associated RC10B7 Factory Team Bearing Set. Featuring high-quality sealed bearings, this upgrade reduces friction, improves drivetrain smoothness, and delivers long-lasting, trouble-free performance for competitive racing. Features: Premium sealed bearings for protection against dirt and debris Low-friction design for smoother, more efficient operation Factory Team quality for professional-level performance and durability Direct fit for the RC10B7 buggy Includes: (1) Complete Factory Team Bearing Set for RC10B7 A must-have upgrade for racers who want maximum drivetrain efficiency and reliability.

Read more less

Enhance steering precision and durability with the Team Associated Factory Team Aluminum Clamping Servo Horn. Designed for 23-tooth servos, this 15.5mm horn offers a secure clamping design to prevent slipping and maintain consistent steering response. Features: CNC-machined aluminum for maximum strength and precision Clamping design for a secure, slip-free fit 15.5mm length for precise steering geometry Fits 23T spline servos Factory Team quality for competition-level performance Includes: (1) Aluminum Clamping Servo Horn – 23T, 15.5mm Perfect for racers who demand reliable, high-performance steering control.

Read more less

🔥 Pure Performance in Every Joint.Step up your soldering game with PUREFUSION™—the elite, lead-free solder designed for high-performance RC, drone, and electronics work. This Sn99.3Cu0.7 alloy delivers ultra-low resistance, superior flow, and a clean, consistent melt for pro-level connections every time. 🧪 Specs: Alloy: Sn99.3Cu0.7 (Lead-Free) Diameter: 1.0mm Flux Core: Rosin, No-Clean Melting Point: ~227°C Conductivity: Optimized for high-current, low-loss joints Residue: Minimal & non-corrosive 🛠️ Includes: 15g compact travel tube – ideal for pit bags, toolboxes, and field kits 💡 Why PureFusion? Ultra-low oxidation Superior wetting & flow Designed for clean, professional results—no mess, no compromise 💥 Whether you're rewiring on the bench or fixing in the field, PUREFUSION keeps your connections solid and your builds clean.  

Read more less

Team Associated RC10B7 Aluminum Hub Link Mounts (+1mm) – Precision Rear Geometry Upgrade 🔧 Fine-tune your rear suspension geometry with the Team Associated RC10B7 Aluminum Hub Link Mounts (+1mm). These mounts offer a +1mm vertical adjustment to the hub link position, helping you dial in rear traction and handling response. Built from lightweight aluminum for durability and performance, they’re a great replacement or upgrade for your RC10B7 or RC10B7D. 🔧 Key Features: ✅ CNC-machined aluminum construction for strength and precision✅ +1mm hub link height adjustment for fine-tuned handling✅ Direct replacement for stock hub link mounts✅ Easy installation for race-day tuning 📦 Includes: (2) Aluminum Hub Link Mounts (+1mm) ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Enhance your rear suspension setup with lightweight adjustability.Upgrade to these +1mm aluminum hub link mounts and take control of your rear-end feel! 🏁

Read more less

💥 Domed for Performance. Bleeder for Precision.Upgrade your suspension with the TLR Aluminum G3 Domed Bleeder Shock Caps, engineered for racers who demand consistent damping, better landings, and refined tuning. These precision CNC-machined aluminum caps are lightweight, durable, and a direct fit for G3 shock bodies found in the 22 5.0 AC, DC, SR, Elite, and 22X-4 kits. 🔧 Features: Domed internal shape mimics Gen2 caps for better shock action Enhanced support and improved landing characteristics Integrated bleeder design allows precise, mess-free bleeding CNC-machined aluminum for strength without the weight Fits G3 shock bodies used in 22 5.0 & 22X-4 platforms 📦 Includes: (2) Domed Bleeder Shock Caps Bleeder screws and seals (pre-installed) 💪 Whether you’re dialing in for high traction or big jumps, these caps give your suspension the edge it needs to perform at its best.

Read more less

🛠️ Built to Handle the Power — Complete Drop-In DifferentialUpgrade or replace your worn-out diff with the TLR 22X AC Complete Gear Differential Set, precision-built for racers who demand maximum traction and bulletproof reliability. Pre-filled with 200,000cs diff fluid and ready to install, this complete assembly is the perfect performance refresh for your 22X platform. 🔧 What’s Inside: (1) Differential Case (2) Cross Pins (2) Outdrives (2) Sun Gears (4) Spider Gears (2) Pins (2) Gaskets (2) Washers (4) O-Rings (4) Button Head Screws (1) Bottle of 200,000cs Differential Fluid ✅ Compatibility:• Losi 22X• Losi 22X-T 🏁 Whether you’re prepping for race day or tuning for traction, this complete gear diff gets you dialed in fast!

Read more less

💥 Cut Weight. Gain Speed. Dominate the Track.The TLR 22X Titanium Slipper Top Shaft Screw is a small upgrade that delivers a big performance edge. Precision-machined from ultra-lightweight titanium, this screw weighs about 50% less than stock—reducing rotating mass and lowering the center of gravity for sharper handling, faster acceleration, and maximum on-track control. 🔧 Key Features: Ultra-lightweight titanium construction ~50% lighter than stock screw Reduces rotating mass for quicker response Lowers CG for improved stability and cornering Precision fit and finish Built for serious racing performance 📦 Includes: (1) Titanium Slipper Top Shaft Screw ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Upgrade your suspension with Team Losi Racing's 5.8mm Titanium Ball Studs. These precision-machined components are built from ultra-lightweight, high-strength titanium to deliver maximum performance with minimal weight—ideal for racers chasing every competitive edge. 🔧 Features: Machined from lightweight titanium for reduced weight Corrosion-resistant for long-lasting performance 5.8mm ball with 6mm thread length Hex-compatible head for easy installation and adjustment Perfect for fine-tuning suspension geometry under high loads 📦 Includes: (2) 5.8mm Titanium Ball Studs (6mm thread) ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Step up your racing game with these Stiffezel Front Suspension Arms for the TLR 22X! Engineered for high-performance racers, these arms provide increased stiffness and durability to enhance cornering, reduce flex, and maximize your control on high-bite tracks. 🔥 Features: Precision-engineered for the TLR 22X platform Stiffezel material delivers superior rigidity over stock arms Sharper steering response and enhanced high-speed handling Reduced flex = more precise suspension feel Perfect for traction-rich surfaces 📦 Includes:(2) Stiffezel Front Suspension Arms ✅ Compatibility:• TLR 22X• TLR 22X-4• TLR 22X-4 Elite• Losi 22S Sprint  

Read more less

Team Associated RC10T6.2 Carbon Fiber +1mm Steering Arm (2) – 71144Upgrade your steering precision with these lightweight +1mm carbon fiber arms from Team Associated. Originally made for the RC10T6.2, but may also fit newer models (check compatibility). ✅ Carbon Fiber Construction – Lightweight and durable✅ +1mm Offset – Provides fine-tuned steering response✅ Direct Replacement – Easy bolt-on upgrade 📦 Includes:(2) +1mm Carbon Fiber Steering Arms Perfect for racers looking to sharpen handling and dial in front-end feel.

Read more less

Reedy 95mm Y-Connector (Black) – ASC27170Need to split a signal or power connection without cluttering your build? The Reedy 95mm Y-Connector offers a clean and efficient solution for a wide range of RC applications. Whether you're programming your ESC, running dual servos, or powering fans, this cable gets the job done. 🧩 Applications: 🔧 ESC Programming – Connect both fan and programmer when only one port is available 🛞 Dual Servo Setups – Run two servos from a single receiver channel ✈️ Aircraft Control Surfaces – Great for setups using dual servos for torque or redundancy 📏 Length: 95mm🎨 Color: Black🔌 Compatible with most standard RC connectors OEM Part #: ASC27170 Let me know if you want a version with variant colors, upsells, or if you're batching all Reedy wires and connectors into a collection!    

Read more less

JConcepts B6/B6D “F2” Buggy Body w/ 6.5" Aero Wing (Clear) – JCO0315Give your buggy a performance boost and aggressive new look with the JConcepts F2 Body for the Team Associated B6 and B6D! With race-proven aerodynamics and competition-inspired details, this body delivers results both on the ground and in the air. 🌀 Engineered to Perform:The F2 design, born from the legendary Finnisher series, features a forward cab placement for enhanced steering and a steeper windshield angle to improve stability during jumps. Whether you're running a stand-up or lay-down transmission, this body fits with precision. 💨 Includes: (1) F2 Clear Body w/ protective overspray film (2) Aero 6.5” Rear Wings Window masks Decal sheet 🔧 Highlights: Fits B6 and B6D (stand-up or lay-down trans) Lightweight, durable polycarbonate construction Optional rear louvers for airflow tuning Designed for aggressive jumps and high-speed tracks Chamfered side-pods and dual-scoop styling 🏁 Trusted by pros and proven at events like the Reedy Race – dominate your local track with style and precision.  

Read more less

Team Associated 4mm Factory Team Heavy Duty Titanium Ball Stud Set (2) (91750)Upgrade your RC ride with strength and precision! The Team Associated Factory Team 4mm Heavy Duty Titanium Ball Stud Set offers superior durability with lightweight performance. Perfect for high-stress suspension points where reliability matters most. Includes: (2) 4mm Heavy Duty Titanium Ball Studs Factory Team Quality — Trusted by Pros!

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated RC10B7/RC10B7D Laydown Gearbox – Precision Replacement for 2WD Performance! 🔧 Keep your buggy in top form with this genuine replacement Laydown Gearbox Housing for the Team Associated RC10B7 and RC10B7D. Designed specifically for the 2WD platform, this gearbox delivers the durability, fit, and reliability you expect from Team Associated — straight from the Factory Team lineup. ⚙️ Key Features: ✅ Official Team Associated replacement part✅ Designed for laydown transmission configuration✅ Ensures proper gear mesh and alignment✅ Molded for durability and exact fitment✅ Ideal for maintenance, rebuilds, or spares 📦 Includes: (1) Laydown Gearbox Housing ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Maintain top-tier performance with factory-spec reliability.Team Associated—trusted by champions. 🏁🔩

Read more less