When performance matters, the Team Exalt X-Rated 5700mAh 2S LiPo is your ultimate power source. Designed with cutting-edge Silicon Graphene technology, this pack delivers exceptional efficiency, low resistance, and long-lasting power — giving you the edge you need lap after lap. ⚡ X-Rated Series Performance Highlights: 135C Continuous / 270C Burst Discharge Rate Silicon Graphene Cell Technology for improved efficiency and cycle life Flat Discharge Curve maintains consistent voltage under load Low Internal Resistance for cooler operation and more punch 5mm High-Amp Bullet Connectors ensure high current throughput ROAR Approval Pending 📊 Battery Specifications: Capacity: 5700mAh Voltage: 7.4V (2S) Discharge Rate: 135C Burst Rate: 270C Weight: 227g ± Dimensions: 96 x 47 x 25.1mm (LxWxH) Connector Type: 5mm Bullets Whether you're pushing your electronics to the limit or chasing consistency in long mains, the EXA3202 X-Rated LiPo gives you the confidence to run harder and longer.

Read more less

Team Associated RC10B7 Gear Differential Set – Reliable Power Transfer for the Track! ⚙️ Keep your buggy’s drivetrain running smooth and efficient with the Team Associated RC10B7 Gear Differential Set!Designed as a direct replacement for the RC10B7 and RC10B7D, this factory gear diff delivers durability, consistent performance, and easy maintenance — essential for serious racers. ✨ Key Features: ⚙️ Complete Factory Replacement Gear Differential – Designed specifically for peak performance with the RC10B7 and B7D 🛠️ Durable Construction – Built to withstand the demands of 1/10 off-road racing 🏁 Smooth and Reliable Power Delivery – Maintains consistent handling and traction under race conditions 🔧 Easy to Service – Designed for fast rebuilding and tuning between heats 📦 Includes: ✔ (1) Complete RC10B7 Gear Differential Set 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Differential fluid is not included and must be purchased separately.🔹 Check your manual for recommended fluid weight based on track conditions. 🏁 Maintain your competitive edge with a fresh RC10B7 Gear Differential Set! 🔥 Upgrade today and ensure maximum performance and reliability from your Team Associated buggy! 🔥

Read more less

  Restore smooth drivetrain performance with the CVA Rebuild Kit from Team Associated. Designed to refresh your constant velocity driveshafts, this kit includes all the necessary components to bring worn CVAs back to peak condition—ensuring efficient power transfer and extended part life. 🔥 Key Features: Complete rebuild set for CVA driveshaft assemblies Helps restore smooth, efficient drivetrain operation Includes cross pins, barrels, and set screws Precision components built to factory specifications Ideal for regular maintenance or post-race refresh ✅ Compatibility: Compatible with a variety of Team Associated CVA-style driveshafts Commonly used in RC10B6, B6.1, B6.2, B6.3, and other AE 1/10 vehicles Check your vehicle’s manual for exact fitment 📦 Includes: (2) Cross Pins (2) Barrels (2) Set Screws ⚠️ Tip:Use thread lock on set screws and inspect parts regularly for wear to prevent drivetrain failure.

Read more less

Keep your suspension dialed in with these M3x48mm steel turnbuckles from Team Associated. Designed for strength and precision, they’re a direct replacement for worn or bent camber or steering links on a variety of Team Associated vehicles. 🔥 Key Features: High-strength steel construction for durability M3 thread with a 48mm (1.89") length Ideal for use in suspension and steering linkages Precision-machined threads for secure fit and adjustability Standard AE turnbuckle design for easy setup ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 series (various locations) SC6.1 / T6.1 / T6.2 May also fit other models requiring M3x48mm turnbuckles — check your manual for fitment 📦 Includes: (2) M3 x 48mm Turnbuckles (1.89") ⚠️ Note:For proper installation, use a 3mm turnbuckle wrench and thread into ballcups evenly to maintain symmetry and alignment.

Read more less

Upgrade your RC10B6.3 front-end handling with these Factory Team Steering BlockArms. Featuring a +1mm height and made from lightweight carbon fiber, these HT (High Traction) arms are designed to optimize steering feel and response in high-grip conditions. A must-have for racers looking to fine-tune their setup for maximum performance. 🔥 Key Features: Genuine Team Associated Factory Team upgrade +1mm height for increased front roll center High traction (HT) geometry improves cornering in grippy conditions Constructed from precision-cut carbon fiber Lightweight and durable for competition use ✅ Compatibility: RC10B6.3 RC10B6.3D May fit other RC10B6-series vehicles with similar front-end geometry 📦 Includes: (1) Left Steering Block Arm (1) Right Steering Block Arm ⚠️ Note:Factory Team parts are intended for experienced builders and racers. Always check fitment before installation.

Read more less

Upgrade your 13mm shocks with these Factory Team precision pistons from Team Associated. The #91934 2x1.8mm shock pistons are designed with a 2.5mm thickness for added tuning flexibility and smoother damping response—perfect for racers fine-tuning their suspension on high-traction surfaces.📦 Includes: (2) FT 13mm Shock Pistons – 2x1.8mm hole layout 2.5mm thick ⚙️ Key Features: CNC-machined precision for consistent performance 13mm piston design fits Team Associated’s latest shocks Ideal for carpet, astro, or high-grip clay tracks Designed for RC10B6.4, RC10B74.2, and other AE vehicles using 13mm shocks 📌 Tuning Tip: Smaller holes (1.8mm) and thicker pistons increase pack and slow down shock speed, which is great for improved control on high-traction tracks or smoother landings. Let me know if you'd like a matching version for other piston sizes or to bundle with 13mm shock sets!

Read more less

The JConcepts S2 body for the XRAY XB2 2025 is a championship-inspired design born from victory at the 2015 World Championships. Originally created for high-grip carpet and turf, the S2 has become a go-to shell for racers demanding low-profile aerodynamics, aggressive styling, and razor-sharp performance. 🔧 Key Features:• Sleek, low-drag profile – optimized for speed and handling• Aggressive cab-forward design with recessed scoop• Rear sidepod scoops – trim for airflow or leave for added downforce• Integrated center fin for high-speed stability• Covers spur gear guard with a snug fit• Tight chassis contour and chamfered detailing• Includes two 6.5” Carpet | Turf | Dirt wings• Molded from clear polycarbonate with overspray film• Includes window masks and JConcepts decal sheet 🇺🇸 Proudly made in the USA and designed by racers for racers, the S2 brings heritage, innovation, and performance to your XB2 2025 build. 📦 Includes:(1) Clear S2 Body for XRAY XB2 2025(2) 6.5” Carpet | Turf | Dirt Wings(1) Decal Sheet(1) Window Mask Sheet 🖌️ Note: Body comes clear and unpainted. Painted body shown for illustration purposes only.

Read more less

These replacement front suspension arms are designed specifically for the Team Associated RC10B7 1/10 scale buggy. Built for strength and precision, they help maintain proper geometry and smooth suspension movement for peak performance on the track. ✅ Includes:• (2) Front Suspension Arms📦 Part Number: 92410🔧 Compatibility: RC10B7

Read more less

Team Associated RC10B6.4 / B7 Steering Hat Bushing Set – ASC91974Upgrade or replace worn bushings with this genuine Team Associated Steering Hat Bushing Set. Originally designed for the RC10B6.4 and B6.4D, this set is also compatible with the RC10B7 series. Perfect for keeping your steering smooth and precise, this pack includes four bushings – just what you need to tighten up your front end feel. ✅ Fits: RC10B6.4 RC10B6.4D RC10B7 RC10B7D 📦 Includes: (4) Steering Hat Bushings OEM Part #: ASC91974

Read more less

1up Racing Premium R/C Solder – 12g Tube Achieve flawless electrical connections with 1up Racing Premium R/C Solder, designed for RC cars, drones, and high-performance electronics. Engineered to soak effortlessly into high-strand count wire, this solder ensures maximum conductivity and durability for even the most demanding applications. Key Features: ✅ Ultra-High Purity Formula – Provides strong, reliable, and long-lasting connections.✅ Easy to Work With – Flows smoothly into high-strand count wire for seamless soldering.✅ High-Performance Under Extreme Conditions – Proven to withstand heat, vibration, and high-current applications.✅ Bright & Shiny Finish – Dries with a clean, professional look.✅ Convenient 12g Tube – Perfect for pit bags and workbenches. The Must-Have Solder for Every Racer & Hobbyist! Whether you're building, repairing, or upgrading, 1up Racing Premium R/C Solder ensures top-tier performance and reliability in every connection. 🔥 Get yours today and experience the 1up Racing difference! 🏁💨

Read more less

Pro-Motion 2.2" Rear Buggy Wheels (4)Available in White (3050-W) or Yellow (3060-Y) Engineered for Speed. Built to Dominate. Give your buggy the winning edge with Pro-Motion’s 2.2" Rear Wheels, designed for today's high-traction tracks. These wheels feature a reinforced inner rib structure for added durability without the weight penalty. The lightweight design and precision molding ensure a true, balanced rotation—exactly what you need for consistent traction and razor-sharp control. ✅ Fits most 1/10 scale buggies with 2.2" rear wheels✅ Lightweight inner rib design for enhanced strength✅ High-durability construction for racing abuse✅ Built-in vent holes reduce tire distortion✅ Available in sleek White or Fluorescent Yellow 📦 Includes:(4) 2.2" Rear Buggy Wheels 💡 Pro Tip: Match with Pro-Motion front wheels for a full performance setup that looks as good as it drives.

Read more less

Team Associated RC10B7 Carbon Fiber Front Shock Tower – Lightweight Strength for Precision Handling ⚙️ The Team Associated RC10B7 Carbon Fiber Front Shock Tower is a lightweight and durable replacement part designed to boost performance and reduce weight. Built from high-quality carbon fiber, this front shock tower offers improved stiffness and consistency, allowing you to dial in your suspension setup with confidence. 🔧 Key Features: ✅ Lightweight carbon fiber construction✅ Increased stiffness for better shock response✅ Precision cut for consistent fit and geometry✅ Direct replacement with easy installation 📦 Includes: (1) Carbon Fiber Front Shock Tower ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Race with confidence.Upgrade your front suspension with this carbon fiber shock tower for consistent performance and competitive edge! 🏆

Read more less

Team Associated B6.1/B6.1D Rear Ballstud Mount (91775) Upgrade your suspension adjustability with the Team Associated B6.1/B6.1D Rear Ballstud Mount. This precision-machined part provides a secure mounting point for your rear camber links, allowing for fine-tuned handling and performance. Features: Precision-machined for accurate fit and alignment Provides stable mounting for rear camber link adjustments Durable construction for long-lasting performance Direct replacement for the stock rear ballstud mount Compatibility: Team Associated B6.1 Team Associated B6.1D Includes: (1) Rear Ballstud Mount Perfect for restoring or upgrading your buggy’s rear suspension geometry and tuning options.

Read more less

FlySky Noble NB4 Pro+ AFHDS3 18-Channel 2.4GHz Radio System w/ FGr4B & FGr8B Receivers 🔥 The Ultimate Transmitter for Champions! 🚗💨 The FlySky Noble NB4 Pro+ AFHDS3 18-Channel 2.4GHz Radio System is designed with elite RC racers and enthusiasts in mind. Packed with advanced technology, a high-resolution color touchscreen, and ultra-low latency response, this radio system delivers unmatched control, precision, and reliability. Whether you're racing, crawling, bashing, or flying, the NB4 Pro+ is the top choice of world champions! 🏆 With 18 programmable channels, a powerful 3450mAh battery for extended runtime, real-time telemetry monitoring, and USB Type-C connectivity, this system provides next-level customization, performance, and durability. The included FGr4B (4-channel) and FGr8B (8-channel) receivers ensure rock-solid signal stability with AFHDS3 digital frequency-hopping technology. ✨ Key Features: 🎮 18-Channel Support – Provides extensive control customization for multiple applications 🖥️ 3.5" Full-Dot Matrix Color Touchscreen – High-resolution 320x480 display for intuitive navigation ☀️ IPS High-Brightness Display – Designed for clear visibility even in direct sunlight 🎨 Customizable UI & Themes – Personalize the interface with custom wallpapers and channel names 🔌 USB Type-C Port – Supports coach mode, head tracking, and firmware updates 🔋 3450mAh Quick-Release Battery – Up to 18 hours of runtime with included power base 💾 Model Memory & Telemetry Support – Monitor real-time battery voltage, temperature, and signal strength 🔄 Adjustable & Detachable Steering Wheel – Configurable for left- or right-handed users 🏎️ Ultra-Low Latency 2CH Mode – Ensures instant response times for high-speed racing 📡 AFHDS3 Protocol – Automatic frequency-hopping technology eliminates interference 🚀 Ergonomic, Lightweight Design – Comfortable grip for extended use 🎒 Premium Carbon Fiber Carrying Case Included – Protects your radio system in style 📦 What’s in the Box? (1) FlySky Noble NB4 Pro+ AFHDS3 18-Channel 2.4GHz Radio System (1) FGr4B 2.4GHz 4-Channel AFHDS3 Receiver (1) FGr8B 2.4GHz 8-Channel AFHDS3 Receiver (1) 3450mAh 18650 Battery (1) Hard Carrying Case with Carbon Fiber Finish (1) FlySky Lanyard (1) Decal Sheet 📖 Product Manual 📌 Note: Everything needed is included—no additional accessories required! 📊 Specifications: Input Voltage: 1S LiPo / 3450mAh 18650 Battery Protocol: AFHDS3 Frequency: 2.4GHz RF Range: >300m Channels: 18 Dimensions (L x W x H): 5.62 x 4.72 x 9.13 in (142.7 x 120 x 232mm) Weight: 23.63 oz (670g) 🏁 Experience Unmatched Control & Performance! 🔥 Whether you're a competitive racer, rock crawler, or RC aviation enthusiast, the FlySky Noble NB4 Pro+ delivers next-generation precision, customization, and responsiveness. 💨 Upgrade today and take your RC experience to championship levels! 🏆🏁

Read more less

Upgrade your suspension game with these Team Associated 3x23mm V2 Ti-Nitride Front Shock Shafts. Built for precision and durability, these screw-mount shafts are a perfect fit for racers looking to keep their ride smooth and responsive. 🔧 Features:✅ Titanium Nitride coating for reduced friction and wear✅ Screw-mount design for secure, reliable installation✅ Precision machined for consistent performance 📦 Includes:(2) 3x23mm Front Shock ShaftsMounting Hardware 🚗 Compatibility:• Team Associated B64D• Team Associated B6 Series• Team Associated B74 / B74.2• Team Associated B7 / B7D• Team Associated SR10• Team Associated RB10

Read more less

Fine-tune your front-end geometry with this Spindle Trail Insert Set from Team Losi Racing. Designed for precision handling adjustments, this set includes four of each: 2mm, 3mm, and 4mm inserts—perfect for dialing in the feel you want on the track. ✅ Includes:• (4) 2mm Inserts• (4) 3mm Inserts• (4) 4mm Inserts Compatible with select TLR 22-series models. A must-have for racers chasing the perfect setup!

Read more less

This is a Reedy Flat Sensor Wire. The flat sensor wires that are included with the Reedy Sonic motor are now available separately in a variety of lengths to suit 1/10 and 1/8 applications! The flat design looks great and provides an extremely clean look. Choose from between 70mm and 270mm lengths.

Read more less

Team Associated 13mm Rear Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

The Team Associated Factory Team B6 19mm Octalock LCF Slipper Pad is compatible with the Octalock spur gears. This design was debuted with the RC10B74.1 buggy, and are a great way to upgrade the transmission in your B4/B5/B6 series buggy or truck.  

Read more less

1UP Racing Blue O-Ring Grease Lubricant (3g) – 1UP120301 Maximize performance and minimize friction with 1UP Racing Blue O-Ring Grease. This 3g container of high-performance lubricant is ideal for serious racers who demand smoother suspension and leak-free differentials. Designed to reduce sliding friction, it delivers ultra-smooth shock feel and long-lasting protection for diff o-rings and seals. Features: Smooths shock operation with reduced sliding friction Ideal for diff o-rings and seals to help prevent leaks Long-lasting formula for consistent performance Perfect for serious racers and RC enthusiasts Includes: (1) 3g Container of Blue O-Ring Grease  

Read more less

1up Racing Pro Pack w/ Pit Stand – The Ultimate RC Lubrication Kit 🔧 Take your RC maintenance to the next level with the 1up Racing Pro Pack, featuring all four of 1up’s premium lubricants—Clear, Blue, Red, and Gold—plus a slick pit stand to keep your bench organized. Whether you're rebuilding a race rig or refreshing a basher, these Made-in-the-USA lubes are trusted by top-tier racers for a reason: performance, protection, and precision. 💡 Smooth drivetrains, responsive suspension, and long-lasting parts start here. This Pro Pack is your all-in-one solution for buttery bearings, sealed shocks, dialed CV joints, and impact-resistant gears. ✨ What's Inside: 🔍 Clear – Ultra-low resistance bearing oil for max drivetrain efficiency🔵 Blue – O-ring grease for silky-smooth shock and diff action🔴 Red – CV joint oil with extreme slickness and dirt-repelling protection🟡 Gold – Anti-wear grease for drivetrain parts under heavy load🪛 Compact Pit Stand – Keeps your car stable and your pit space clean 📦 Pro Tips for Application: Clear Bearing Oil – 1 drop per bearing after full clean/dry Blue O-Ring Grease – Apply generously to shock/diff o-rings and shaft threads Red CV Joint Oil – 1–2 drops on clean joints for ultra-smooth travel Gold Anti-Wear Grease – Light coat on pins, pulleys, and gear teeth for long life 🛡️ Race-Proven • Factory-Backed • Made in the USA This is the one lube kit that does it all—and does it right. Whether you're tuning 1/10 buggies or beefing up your 1/8 scale basher, the 1up Pro Pack delivers peak performance across your fleet. 💡 Protect Your Investment – Grab the 1up Racing Pro Pack Today!    

Read more less

1up Racing Pro Duty Equipment Case – Built for the Track, Ready for Anything 🔧 Protect your gear like a pro with the 1up Racing Pro Duty Equipment Case – the ultimate storage solution for racers who value durability, organization, and style. Whether you're hauling tools, electronics, or spare parts, this case is engineered to keep your essentials safe and scratch-free. 💼 Featuring a rigid outer shell, dense internal padding, and six customizable dividers, this case adapts to your setup with ease. Impact-absorbing foam on the top and bottom adds next-level protection, while the internal compartments and zippered pouch keep everything neat and accessible. ✨ Key Features: 🛡️ Heavy-Duty Shell with Dense Padding – Keeps your tools, chargers, and electronics safe📦 Adjustable Dividers – 6 foam inserts for a fully customizable interior layout🧵 Durable Black Fabric Interior – Clean, professional finish inside and out🧰 4 Tool Pouches + Zippered Pocket – Store scissors, pliers, leads, setup sheets, and more🧩 Impact-Absorbing Foam (Top & Bottom) – Superior protection during transport 📏 Dimensions: Interior Space: 23 x 20 x 7.5cm\ Dividers Included:✔️ (1) 23cm Divider✔️ (2) 12.5cm Dividers✔️ (3) 6.5cm Dividers 🎯 Built to Travel. Designed to Organize. Whether you're trackside or organizing your pit area at home, the 1up Racing Pro Duty Equipment Case keeps your essentials secure, accessible, and race-ready. 💡 Organize Like a Pro – Grab Your 1up Equipment Case Today!

Read more less

Team Associated 12mm Blue Aluminum Shock Bushings (4) – Part 91816Precision Fit. Race-Proven Durability. The Team Associated 12mm Blue Aluminum Shock Bushings (91816) are high-quality replacements designed for enhanced suspension performance and long-lasting durability. Perfect for demanding race setups, these bushings are crafted from lightweight anodized aluminum to maintain alignment and reduce play in the shock mounting. ✅ Fits 12mm shock mount applications on select Team Associated vehicles✅ CNC-machined from high-grade aluminum for strength and precision✅ Anodized blue for a sleek, professional finish✅ Reduces slop and enhances suspension consistency✅ Upgraded alternative to plastic bushings 📦 Includes: (4) 12mm Blue Aluminum Shock Bushings Part #: 91816 💡 Pro Tip: Use with matching shock components for maximum suspension precision and race-level performance.

Read more less

Key Features 7075 T6 aluminum Clamping style with large m2.5 screw Length 18.5mm for smoother steering response and less stress on the servo Laser etched spline size Overview Designed for the steering servo in the RC8B3, RC8B3e, RC8T3, and RC8T3e. These new machined aluminum servo horns are stronger than the stock plastic ones that come with most servos and due to the slightly shorter length, they provide a smoother steering feel while decreasing the load on the servo.   ASC1361

Read more less

Team Exalt BL108 High Torque Brushless Servo (High Voltage / Metal Case)📦 Part #: EXAHB108 The Exalt HB108 is a high-performance servo designed for racers who demand power, speed, and durability. Perfect for 1/8 and 1/10 off-road applications, it features a brushless motor, aluminum case, and steel machined gears—making it a workhorse ready for harsh racing conditions. ⚙️ Features: 💪 High Torque Output: Up to 486oz-in @ 8.4V ⚡ Fast Response: As quick as 0.075sec/60° 🔋 High Voltage Capable: 4.8V to 8.4V operation 🛡️ Waterproof Design for all-weather confidence 🧊 All-Aluminum Case improves heat dissipation 🔩 CNC-Machined Steel Gears for max strength and durability 🔧 Smooth & Responsive Feel for high-precision control 📊 Performance Specs: Voltage Speed (sec/60°) Torque (oz-in / kg-cm) 6.0V 0.097 389 / 28 7.4V 0.086 431 / 31 8.4V 0.075 486 / 34.9 Motor: Brushless Operating Voltage: 4.8V–8.4V Temperature Range: -15°C to +70°C Spline: 25T Dimensions: 40x20x37.5mm (1.57x0.78x1.47in) Weight: 83g (2.92oz) 📦 Includes: (1) Exalt HB108 High Torque Brushless Servo (1) Set of Composite Servo Horns Mounting Hardware 🔥 Built to dominate. The BL108 delivers the strength and precision you need to stay in control—race after race.

Read more less

Avid B7 Hardened Rear Inner Hinge Pins (3.5x50mm) – 2pcs [AV10135] Product Overview: The Avid 3.5x50mm Hardened Rear Inner Hinge Pins for the Team Associated B7 are designed to fix a known issue with the stock kit pins. The stock 49.5mm length can lead to the pins pulling through the C arm mounts during hard impacts or wear. Avid’s precision-engineered 50mm pins provide that extra bit of length needed to offer better support and reduce the risk of failure — a must-have upgrade for racers pushing their B7 to the limit. Features: (2) 3.5x50mm hardened steel hinge pins for B7 rear inner location Increased length over stock (49.5mm) helps prevent pin pull-out from C arm mounts Designed as a direct replacement for the rear hinge pins in ASC92496 (no need to buy the whole set!) Developed in collaboration with Avid UK distributor (XFactory) For users with original-style C arm mounts: flip the arms and remove a 1mm shim for added retention strength (UK tuning tip!) Includes: (2) 3.5x50mm Hardened Rear Inner Hinge Pins Part Number: AV10135

Read more less

Team Associated FT 3x27.5mm V2 Chrome Shock Shafts – ASC91620 Smooth, Durable, Factory-Grade Suspension Parts Upgrade or replace your V2 shocks with the Factory Team 3x27.5mm Chrome Shock Shafts, engineered for exceptional performance and longevity. Designed specifically for #91577 buggy rear and #91578 truck front shock bodies, these shafts provide a precise fit with a low-friction chrome finish. ⚙️ Features: ✅ Chrome-coated for reduced stiction and increased durability ✅ Designed for secure screw-mounted piston setup ✅ Factory Team precision for consistent shock action ✅ Ideal for competitive racing environments 📦 Includes: (2) 3x27.5mm V2 Chrome Shock Shafts ✅ Compatibility: #91577 – Buggy Rear Shock Bodies #91578 – Truck Front Shock Bodies Not compatible with E-clip piston systems 🏁 Factory Team quality that keeps your ride smooth and race-ready!

Read more less

Upgrade your gear differential with this Factory Team aluminum diff cover for the RC10B6.1. Designed for maximum durability and precision, this machined aluminum cover adds strength to the gear diff case and helps reduce flex under load—ideal for high-power setups and serious racers. 🔥 Key Features: Precision CNC-machined aluminum construction Factory Team performance part for racing applications Provides added rigidity and improved seal pressure Hard-anodized finish for long-lasting durability Direct replacement for the stock plastic gear diff cover ✅ Compatibility: RC10B6.1 RC10B6.1D RC10B6.2 / B6.3 series (compatible gear diff cases) May also fit other Team Associated models using the same gear diff design 📦 Includes: (1) Aluminum Gear Diff Cover ⚠️ Tip:For best results, use with Team Associated Factory Team gear diff components and premium diff fluid.

Read more less

Upgrade your suspension setup with the Factory Team 13mm Shock Collar and Seal Retainer Set from Team Associated. This black anodized aluminum set is designed to increase durability and offer a clean, high-performance look. 📦 Includes: (2) Black aluminum shock collars (2) Black aluminum seal retainers ⚙️ Key Features: CNC-machined 6061-T6 aluminum construction Black anodized for a sleek, factory appearance Increased strength over stock plastic parts Designed for precision fit and long-term durability Factory Team tuning part ✅ Compatibility:Fits Team Associated 13mm shocks, commonly used on: RC10B6.4 / B6.4D RC10B74.2 / B74.2D RC10T6.4 RC10SC6.4 And other vehicles equipped with Team Associated 13mm shocks 🏁 Ideal For:Racers looking to improve the consistency, look, and longevity of their suspension setup. Great for both carpet and dirt track performance.

Read more less

1up Racing Curved Glue Tips feature a steel tip which is easy to unclog for extended use. A single tip can last the life of a bottle of glue! Universal fit. For use with Thick viscosity CA glue. Package includes ten tips.

Read more less

Fine-tune your buggy’s handling with the Team Associated RC10B6.2 +2mm CVA Axles. The extended length helps adjust track width and driveshaft plunge for improved stability and cornering performance. Features: +2mm length for optimized track width and driveshaft geometry Precision-machined for smooth, efficient power transfer Durable construction for long-lasting performance Direct replacement for stock CVA axles Includes: (2) +2mm CVA Axles Compatibility: Team Associated RC10B6.2 Perfect for racers looking to fine-tune suspension setup and gain an edge on the track.

Read more less

Keep your buggy looking sharp and handling at its best!These clear front wings are direct replacements for the RC10B7 and come in the same style as included in the kit. Perfect for having a backup on hand or customizing with your own paint job for that extra flair. ✅ Features: Official Team Associated replacement part Clear polycarbonate – ready for custom paint Matches the original RC10B7 kit wing Adds front-end downforce for better steering feel 📦 Includes: (2) Clear Front Wings for RC10B7 Upgrade, replace, or customize—your RC10B7 deserves the best!

Read more less

Team Associated RC10 B6.2 CVA Axle (2) [91858] 🔧 Keep your ride tight and true! These Team Associated RC10 B6.2 CVA Axles are direct replacement parts designed to restore the performance and precision of your buggy's driveline. Whether you're rebuilding or just stocking up, these 2 high-quality axles are built to take the abuse of competitive 1/10 off-road racing. ✅ Compatible with B6.2 & B6.2D✅ Precision-machined for smooth drivetrain action✅ Sold in pairs Includes:(2) CVA Axles 📦 Part Number: 91858🏁 Brand: Team Associated

Read more less

Team Associated 13mm Rear Shock Spring. These replacement springs springs are intended for the Team Associated B6.4D, however, they will also work with the Team Associated B6.4D as a tuning option. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less