Keep your suspension smooth and precise with the Team Associated Hinge Pin Set. Designed to replace worn or bent pins, this complete set provides the exact lengths and diameters needed for secure suspension arm mounting and consistent handling. 🔥 Key Features: Factory-spec hinge pins for suspension arm pivots Hardened steel construction for strength and durability Direct replacement for stock pins Maintains correct suspension geometry Essential maintenance item for serious racers ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 series RC10B6D / B6.1D / B6.2D / B6.3D SC6.1 / SC6.2 T6.1 / T6.2 Touring Car (TC6.2, TC7.1, TC7.2, TC7.4) 📦 Includes: Complete set of front and rear hinge pins (various lengths) ⚠️ Tip:Always check hinge pins after crashes—bent pins can cause binding and poor handling. Replace as needed to keep suspension moving freely.

Read more less

Optimize rear-end stability and durability with the RC10B6.2 Rear Hubs from Team Associated. Designed for high-performance racing, these molded composite hubs provide the perfect balance of strength, adjustability, and weight for 1/10 scale 2WD competition buggies. 🔥 Key Features: Molded composite construction for durability and weight savings Provides secure and precise fitment for rear axles and bearings Designed for high-performance rear suspension geometry Includes mounting locations for vertical ball stud height adjustments ✅ Compatibility: RC10B6.2 RC10B6.2D RC10B6.3 / B6.3D (backwards compatible) Also fits other B6-series vehicles with compatible rear hub geometry 📦 Includes: (1) Left Rear Hub (1) Right Rear Hub ⚠️ Note:Use with Team Associated’s tuning inserts and vertical ball stud hardware for full adjustability.

Read more less

Upgrade your RC10B6.3’s drivetrain with the Heavy Duty (HD) Slipper Spring and Adapters from Team Associated. Engineered for improved durability and consistent slipper performance, this set is ideal for racers pushing their vehicles to the limit on high-traction surfaces. 🔥 Key Features: Heavy duty slipper spring for increased pressure and durability Includes updated slipper adapters for optimized fit and function Designed for smoother and more consistent slipper operation Direct replacement for the stock B6.3 slipper components ✅ Compatibility: RC10B6.3 RC10B6.3D May also fit other RC10B6-series models with similar slipper configurations 📦 Includes: (1) HD Slipper Spring (2) Slipper Adapters ⚠️ Note:Ensure proper slipper assembly for optimal performance. Refer to your vehicle’s manual for installation instructions.

Read more less

Upgrade your shocks with the XRAY Aluminum Shock Cap Nuts. Machined from premium Swiss 7075 T6 aluminum, these cap nuts include a precision vent hole that allows trapped air to escape during assembly for smoother and more consistent shock performance. Features: CNC-machined from high-quality Swiss 7075 T6 aluminum Integrated vent hole for bubble-free shock bleeding Designed for Big Bore shocks Hard-anodized finish for long-lasting durability Lightweight design without sacrificing strength Includes: (2) Aluminum Shock Cap Nuts with Vent Hole Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) XRAY XB4 (4WD Buggy) Other XRAY models equipped with Big Bore shocks (check manual)

Read more less

Secure your batteries with confidence using the XRAY Composite LiPo Battery Holder – Long. Precision-molded from premium XRAY composite, these holders are lightweight yet durable, ensuring a snug fit and reliable hold during even the most aggressive racing. The long version is designed for extended-size LiPo packs, offering proper alignment and security in your chassis layout. Features: Includes 2 front & 2 rear holders Long design for extended-size LiPo battery packs Molded from high-quality XRAY composite material Keeps batteries secure under high loads and impacts Lightweight and easy to install Compatibility: XRAY XB2 – 1/10 2WD Buggy (all versions, long battery layout) XRAY XT2 – 1/10 2WD Stadium Truck (all versions, long battery layout) XRAY XB4 – 1/10 4WD Buggy (check manual for pack fitment) Part Number: 326176-L      

Read more less

Fine-tune your suspension geometry with the XRAY Composite Shock Ball Joint Set. Featuring extended ball joints (+2mm & +4mm), this upgrade allows you to adjust shock mounting positions for improved handling balance and suspension response. Features: Includes +2mm and +4mm extensions for versatile tuning Strong composite material ensures durability and smooth operation Helps refine ride height, shock angle, and suspension geometry Quick and easy installation for racers looking for precision handling Includes: (2) +2mm Composite Shock Ball Joints (2) +4mm Composite Shock Ball Joints Compatibility: Designed for XRAY off-road and on-road platforms (check vehicle manual for fitment)

Read more less

Upgrade your XB2 with the XRAY Carbon Rear Shock Tower (4-Dots) for precision handling and durability. Made from high-quality carbon fiber, this shock tower provides the perfect balance of strength and lightweight performance. The 4-dot design gives you multiple shock mounting options, making it easy to fine-tune your suspension for any track condition. Features: Premium carbon fiber construction – lightweight yet rigid 4-dot design for expanded shock mounting adjustability Improves rear suspension tuning and consistency Factory XRAY precision fit and finish Direct replacement for stock rear shock tower Compatibility: XRAY XB2 (all versions requiring 4-dot rear tower) Includes: (1) Carbon Rear Shock Tower – 4-Dots

Read more less

Fine-tune your steering geometry with XRAY’s precision-machined Graphite Steering Block Extension Plates. Available in 1-dot, 2-dot, and 3-dot options, these lightweight graphite plates let you adjust steering response and handling characteristics to match your track and driving style. Features: Made from high-quality graphite for strength and precision Adjusts steering geometry for optimal handling Lightweight, durable construction Direct fit for XB2 & XT2 platforms Includes 2 extension plates per set Dot Options (choose your setup): 1-Dot (322294): Minimal extension – smooth, stable steering 2-Dot (322295): Balanced setting – great all-around response 3-Dot (322296): Maximum extension – aggressive steering feel Compatibility: XRAY XB2 (all versions) XRAY XT2 (all versions) Includes: (2) Graphite Steering Block Extension Plates (select 1-dot, 2-dot, or 3-dot version)

Read more less

Upgrade your steering setup with XRAY’s Graphite Composite C-Hubs for the XB2. Available in Right (322210-G) or Left (322220-G), these hubs are molded from high-strength graphite composite material for improved stiffness, precision, and durability over standard composite parts. Features: Strong graphite composite construction Improves steering precision & consistency Direct replacement for stock XB2 C-hubs Available in Right or Left version Compatibility: XRAY XB2 (all versions) Other XRAY platforms using XB2 C-hubs Includes (choose option): (1) Right C-Hub – 322210-G (1) Left C-Hub – 322220-G

Read more less

Upgrade your XRAY XB2 with this Hard Composite Front Lower Left Suspension Arm featuring Low Shock Mounting (LSM) geometry. Designed for maximum durability and precision, this arm is ideal for high-traction conditions where reduced flex translates into improved consistency and cornering stability. Features: Hard composite construction for increased stiffness Low Shock Mounting design for improved suspension geometry and handling Factory precision molding for perfect fitment Direct replacement part for easy installation Compatibility: XRAY XB2 (All variants using LSM geometry) Includes: (1) Front Lower Left Suspension Arm – Hard

Read more less

The XRAY XB2 Hard Composite Front Suspension Arm (Right, Lower, Low Shock Mounting) is molded from specially-formulated hard composite material for maximum durability and precise handling. The low shock mounting design lowers the shock position for a more stable setup and improved cornering performance, especially on high-traction tracks. Features: Hard composite material for maximum stiffness and durability Low shock mounting for enhanced stability and cornering Precision-molded for perfect fit and geometry Factory replacement XRAY part Compatibility: XRAY XB2 (all versions, right side front lower arm)

Read more less

The XRAY XB2 Differential Gasket Set includes four precision-cut gaskets designed for use in the XB2 gear differential. These gaskets provide a tight, consistent seal to prevent oil leakage and ensure smooth, reliable diff performance. Perfect for rebuilds or routine maintenance, they help extend the life of your differential while maintaining peak performance. Features: Precision-cut gaskets for perfect sealing Prevents oil leaks and maintains smooth diff action Durable material for long-lasting reliability Essential for rebuilds and maintenance Designed for XRAY XB2 vehicles Includes:(4) Differential Gaskets    

Read more less

The XRAY XB2 Composite Idler Gear is the direct replacement 25-tooth idler gear for the XB2 1/10 scale buggy. Precision molded for durability and smooth drivetrain operation, this gear keeps your XB2 running strong with consistent performance. Features: Genuine XRAY replacement part Composite construction for strength and low wear Smooth, efficient power transfer 25-tooth idler gear Compatibility: XRAY XB2 1/10 Buggy Includes: (1) 25T Composite Idler Gear  

Read more less

Upgrade your suspension with Team Losi Racing's 5.8mm Titanium Ball Studs. These precision-machined components are built from ultra-lightweight, high-strength titanium to deliver maximum performance with minimal weight—ideal for racers chasing every competitive edge. 🔧 Features: Machined from lightweight titanium for reduced weight Corrosion-resistant for long-lasting performance 5.8mm ball with 6mm thread length Hex-compatible head for easy installation and adjustment Perfect for fine-tuning suspension geometry under high loads 📦 Includes: (2) 5.8mm Titanium Ball Studs (6mm thread) ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Upgrade your rear suspension geometry with the JConcepts Aluminum HRC "D Block" Arm Mount. Designed for the RC10B7/B7D, this mount raises the hinge pin height for a higher roll center, offering improved stability and cornering response on high-traction surfaces. Built from premium 7075 aluminum, it's strong, precise, and ready for race-day abuse. Features:• Raises hinge pins for High Roll Center (HRC) tuning• Precision-machined 7075 aluminum construction• Compatible with Team Associated pill inserts• Enhances control over toe, anti-squat, and wheelbase• Lightweight and race-proven design• Anodized finish in your choice of blue or black• Laser-etched JConcepts logo and chamfered edges for a clean, factory look Includes (1) Aluminum HRC “D Block” mount. A must-have for advanced buggy setups.

Read more less

Team Associated RC10T6.2 Carbon Fiber +1mm Steering Arm (2) – 71144Upgrade your steering precision with these lightweight +1mm carbon fiber arms from Team Associated. Originally made for the RC10T6.2, but may also fit newer models (check compatibility). ✅ Carbon Fiber Construction – Lightweight and durable✅ +1mm Offset – Provides fine-tuned steering response✅ Direct Replacement – Easy bolt-on upgrade 📦 Includes:(2) +1mm Carbon Fiber Steering Arms Perfect for racers looking to sharpen handling and dial in front-end feel.

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Stronger. Stiffer. Race-Ready. Upgrade your steering and camber links with the Team Associated 3.5x48 mm Steel Turnbuckles — a precision-built Factory Team option for racers who demand maximum strength and reliability. Perfect for high-stress race conditions, these heavy-duty steel links add confidence to every corner and landing. Performance Upgrade Designed to replace standard turnbuckles on the RC10B6, RC10T6, and RC10SC6 platforms, this 3.5 mm version provides added stiffness and durability when used with 3.5 mm ballcups (92308). The result is tighter handling, smoother steering response, and reduced flex over time — a must-have for competitive racers and bashers alike. Features: Heavy-duty 3.5 mm steel construction for extreme strength Increased stiffness for consistent steering geometry Works with 3.5 mm ballcups (#92308) Ideal upgrade for high-traction and high-impact racing Factory Team precision fit and finish Includes: (2) 3.5 × 48 mm Steel Turnbuckles Compatibility: Team Associated RC10 B6 series Team Associated RC10 T6 series Team Associated RC10 SC6 series Team Associated Factory Team — Engineered to Win.

Read more less

Team Associated RC10B7 FT Adjustable KPI Set – ASC92479 Fine-Tune Your Front End for Any Track Condition The Factory Team Adjustable KPI (KingPin Inclination) Set gives you race-proven steering geometry flexibility for your RC10B7. Originally featured on prototype models, this advanced tuning option is now available to all racers looking to optimize handling for different surfaces—from low-grip dirt to high-traction clay or carpet. ⚙️ Features: ✅ Precision adjustable KPI set for RC10B7 ✅ Nine distinct KPI settings for optimal tuning range ✅ Includes 3mm and 4mm trailing steering blocks ✅ Enhance corner entry, steering feel, and overall stability ✅ Factory Team engineered for high-level performance 📦 Includes: (2) Adjustable KPI Steering Blocks (1) 3mm Trailing Block Set (1) 4mm Trailing Block Set (Kit Default) Supplement with setup steps and KPI values ✅ Compatibility: RC10B7 🏁 Elevate your steering control and tailor your B7 to any surface with this ultimate front-end tuning kit!

Read more less

Team Associated RC10B7 Factory Team Steel Universal Driveshaft Set (69mm) – Smoother Power Delivery, Race-Ready Durability! 🚗 Boost your RC10B7 or RC10B7D’s drivetrain performance with the Team Associated Factory Team Steel Universal Driveshaft Set!These 69mm steel universals are specifically designed to reduce mechanical bind, ensuring smoother power transfer, better handling, and improved durability on the toughest tracks. ✨ Key Features: 🔩 Heavy-Duty Steel Construction – Built for maximum strength and long-lasting durability 🔧 Reduces Mechanical Bind – Ensures smoother drivetrain performance and improved cornering 🏁 Optimized for Racing – Helps deliver consistent handling in high-traction and rough conditions 🛡️ Official Factory Team Upgrade – Trusted quality from Team Associated’s championship pedigree 📦 Includes: ✔ (2) 69mm Steel Universal Driveshafts 📦 Compatibility: ✅ Team Associated RC10B7 ✅ Team Associated RC10B7D 📌 Note: 🔹 Direct replacement for stock parts.🔹 Recommended for racers seeking smoother, more efficient drivetrain performance. 🏁 Upgrade your RC10B7 or B7D with the Factory Team Universal Driveshaft Set and drive smoother, faster, and with more confidence! 🔥 Precision-engineered for serious racers by Team Associated! 🔥

Read more less

The XRAY 2.5mm Graphite Steering Block Extension is a front-end tuning option designed to adjust Ackermann geometry and steering response. This 1-slot version provides a handling characteristic between XRAY's standard 2-slot extension and the more aggressive 0-slot version. About the Graphite Steering Block Extension Fine-Tune Steering & Ackermann XRAY designed these extensions to work on either the left or right steering block. The 1-slot configuration turns the outside wheel more than the 2-slot version, producing additional steering while remaining less aggressive than the 0-slot option. Features: Genuine XRAY optional tuning component 2.5mm graphite steering block extensions 1-slot Ackermann configuration Allows fine adjustment of steering characteristics More aggressive steering than the 2-slot configuration Less aggressive than the 0-slot configuration Can be used on left and right steering blocks Designed for tuning across different surfaces and track conditions Lightweight graphite construction Includes two extensions Includes: (2) XRAY Graphite Steering Block Extensions – 1 Slot Specifications: Manufacturer: XRAYPart Number: 322291Material: GraphiteThickness: 2.5mmConfiguration: 1 SlotPosition: Front SteeringQuantity: 2 Compatibility: ✅ XRAY XB2✅ XRAY XT2 XRAY's current XB2 documentation continues to list 322291 as the optional 1-slot steering block extension, alongside 322290 2-slot, 322292 0-slot, and 322293 3-slot configurations. 💡 Pro Tip: XRAY's Ackermann options let you tune how aggressively the car steers: 322290 – 2 Slot: Easier to drive, less aggressive322291 – 1 Slot: Middle-ground steering response322292 – 0 Slot: Most aggressive steering, suited to tight and technical layouts

Read more less

The XRAY Aluminum Front Suspension Holder Brace is a precision-machined suspension tuning component designed for XB2 setups using the optional 23°/29° front lower arm mounts. Manufactured from premium Swiss 7075-T6 aluminum, the brace supports the front suspension holder while allowing either 23° or 29° kick-up configurations. Features: Genuine XRAY optional tuning component CNC-machined Swiss 7075-T6 aluminum Designed for 23° or 29° front kick-up Supports the optional front lower suspension arm mount Precision-machined for accurate suspension geometry Durable aluminum construction Designed for competition-level XB2 setups Required when using applicable 23°/29° optional arm mounts Includes: (1) XRAY Aluminum Front Suspension Holder Brace Specifications: Manufacturer: XRAYPart Number: 321211Material: Swiss 7075-T6 AluminumKick-Up: 23° / 29°Position: FrontType: Suspension Holder Brace Compatibility: ✅ XRAY XB2✅ XRAY XT2 configurations using this front suspension system XRAY manuals document 321211 alongside the optional 322313 aluminum and 322314 brass 23°/29° front lower arm mounts. 💡 Pro Tip: If you're buying 321211, double-check your front arm mount. This brace is specifically associated with the 23°/29° setup and is used with 322313 or 322314.

Read more less

The XRAY Aluminum Rear Hub Plate is a precision-machined rear suspension component designed for XRAY's multi-adjustable rear upright system. Manufactured from premium Swiss 7075-T6 aluminum, this plate provides a strong and precise mounting interface while allowing racers to take advantage of XRAY's adjustable rear hub geometry. About the Aluminum Rear Hub Plate Precision Rear Suspension Adjustment The 323381 rear hub plate works with XRAY's multi-adjustable rear upright system, allowing the rear hub configuration to be tuned through different mounting positions. XRAY factory manuals show the plate installed in the rear upright assembly and provide alternate mounting orientations for setup changes. Features: Genuine XRAY replacement and tuning component CNC-machined from Swiss 7075-T6 aluminum Designed for XRAY multi-adjustable rear uprights Precision-machined for accurate suspension fitment Multiple mounting positions for rear suspension tuning Lightweight and durable aluminum construction Suitable for left or right rear upright Competition-oriented suspension component Great replacement or race-day tuning spare Includes: (1) XRAY Aluminum Rear Hub Plate Specifications: Manufacturer: XRAYPart Number: 323381Material: Swiss 7075-T6 AluminumPosition: RearQuantity: 1 Compatibility: ✅ XRAY XB2✅ XRAY XB4 XRAY factory documentation shows 323381 in both XB2 and XB4 rear upright assemblies. 💡 Pro Tip: This is one rear hub plate, not a pair. The same 323381 plate is used on either the left or right rear upright, so you'll need two if you're replacing both sides. XRAY's assembly diagrams specifically show the rear upright assembly as L=R

Read more less

The XRAY 83mm Front Drive Shaft is a genuine replacement CVD driveshaft designed for the XB4 front drivetrain. Manufactured from XRAY's premium HUDY Spring Steel™, this shaft combines high strength, durability, and precise machining for smooth and efficient power delivery. About the Front Drive Shaft Competition-Ready CVD Performance This 83mm CVD driveshaft uses a 2.5mm drive pin and is designed for the front drivetrain. XRAY factory documentation identifies the 83mm CVD as the included front driveshaft on multiple XB4 generations. Features: Genuine XRAY replacement component Front CVD driveshaft Premium HUDY Spring Steel™ construction 83mm length 2.5mm drive pin Precision-machined for smooth drivetrain operation Designed for competition-level durability Suitable for left or right front position Excellent replacement or race-day spare Includes: (1) XRAY Front Drive Shaft Specifications: Manufacturer: XRAYPart Number: 365225Material: HUDY Spring Steel™Length: 83mmDrive Pin: 2.5mmType: CVDPosition: FrontQuantity: 1 Compatibility: ✅ XRAY XB4 XRAY's factory documentation confirms 365225 across multiple XB4 generations, including the XB4 2021 and XB4 2024 front drivetrain assemblies. 💡 Pro Tip: XRAY also lists other front shaft options around this setup, including 365202 – 83mm ECS and 365226 – 84mm CVD. Make sure you're matching the shaft length and CVD/ECS configuration required by your specific setup.

Read more less

The XRAY 77mm Rear Drive Shaft is a precision CNC-machined CVD driveshaft manufactured from XRAY's renowned HUDY Spring Steel™. Designed for competition-level durability and drivetrain efficiency, this rear driveshaft features a 2.5mm drive pin and a thin, lightweight profile while maintaining excellent strength. XRAY directly confirms these specifications for part 325327. About the Rear Drive Shaft Precision Drivetrain Performance The 77mm driveshaft is designed to provide efficient power transfer through the rear drivetrain. XRAY uses a proprietary hardening process on its HUDY Spring Steel™ driveshafts to increase durability and service life while maintaining a thin shaft profile for reduced rotating mass. Features: Genuine XRAY replacement drivetrain component CNC-machined CVD rear driveshaft Premium HUDY Spring Steel™ construction 77mm length 2.5mm drive pin Thin, lightweight driveshaft design Designed for maximum drivetrain efficiency Proprietary hardened construction for increased durability Precision manufactured for competition RC racing Includes: (1) XRAY Rear Drive Shaft Specifications: Manufacturer: XRAYPart Number: 325327Material: HUDY Spring Steel™Length: 77mmDrive Pin: 2.5mmPosition: RearQuantity: 1 Compatibility: ✅ XRAY XB2 XRAY's XB2 manuals continue to list 325327 in the rear drivetrain, including newer XB2 configurations. There is also evidence of this 77mm shaft being used on certain XB4 configurations, but I would not advertise universal XB4 compatibility because fitment varies by generation and setup. 💡 Pro Tip: When replacing the rear driveshaft, inspect the drive shaft coupling, 2.5mm pin, drive axle, and bearings for wear at the same time. Excessive play in any of these components can reduce drivetrain efficiency and accelerate wear on the new shaft.

Read more less

🏁 High-Grip Stability. Linear Response. Factory-Matched Performance. The XRAY 42mm 5-Dot Front Spring Set is designed specifically for XRAY big-bore shocks, providing a constant linear spring rate throughout compression for predictable and consistent suspension performance. XRAY identifies the 5-dot rating directly on the springs for quick setup identification. Each XRAY spring is individually measured, selected, and matched into pairs to ensure equal length and consistent performance between the left and right sides of your race car. ⚡ Features: 🏁 Genuine XRAY optional tuning springs⚙️ 5-Dot front spring rate📏 42mm length🎯 Linear spring design provides a constant rate throughout compression🔧 Specifically designed for XRAY big-bore shocks⚖️ Individually measured and matched into pairs🚀 Provides additional suspension setup options🔥 XRAY notes the 5-dot spring can improve front stability and overall handling on very high-grip tracks 📦 Includes: (2) XRAY 42mm 5-Dot Front Springs 📏 Specifications: Part Number: 368195Position: FrontLength: 42mmSpring Type: LinearIdentification: 5 DotsQuantity: 2 🔧 Compatibility: Used across multiple XRAY 1/10 off-road platforms, including various: ✅ XRAY XB2✅ XRAY XB4✅ XRAY XT2 Fitment spans numerous generations, so racers should confirm the 42mm front spring configuration used on their specific model before ordering. 💡 Pro Tip: The 5-Dot is a setup spring, not simply a replacement spring. XRAY specifically notes that this spring can provide better front stability and overall handling in very high-grip conditions, making it a useful tuning option for carpet and other high-traction surfaces.

Read more less

 🏁 Lightweight. Precise. Factory XRAY Steering Performance The XRAY Composite Steering Arms are genuine replacement steering components designed for XRAY's 1-piece chassis steering system. XRAY's factory manuals identify 322515 as the HARD composite steering arms included with the vehicle, with aluminum 322516 arms available as the optional upgrade. Designed for smooth, precise steering operation, these composite arms provide the factory steering characteristics intended by XRAY while keeping the steering assembly lightweight. ⚡ Features: 🏁 Genuine XRAY replacement parts💪 Hard composite construction🪶 Lightweight steering system design🎯 Designed for precise and consistent steering operation⚙️ Specifically designed for XRAY's 1-piece chassis configuration🔧 Direct replacement for the factory steering arms🏎️ Competition-ready factory specification🛠️ Great replacement or race-day spare 📦 Includes: (2) XRAY Composite Steering Arms 📏 Specifications: Part Number: 322515Material: Hard CompositeQuantity: 2Position: Front SteeringApplication: 1-Piece Chassis Steering System 🔧 Compatibility: Verified XRAY documentation shows 322515 used on: ✅ XRAY XB2 2024 Carpet✅ XRAY XB2 2024 Dirt ✅ XRAY XB2 2025 Dirt ✅ XRAY XT2 2024 Important: This part is specifically associated with the newer 1-piece chassis steering configuration, so I would not advertise it as fitting older XB2 generations universally. One parts source specifically lists it as incompatible with XB2 2022 and 2023 models. 💡 Pro Tip: If you're looking for a stronger, more rigid steering setup, XRAY offers 322516 Aluminum Steering Arms as the optional upgrade. XRAY states that the aluminum arms increase strength and reliability while improving steering precision and feel.

Read more less

 🏁 Lower Shocks. More Rear Traction. Serious Setup Tuning. The XRAY Aluminum Rear Shock Absorber Adapter Set is a performance tuning upgrade designed to mount the rear shocks lower on the suspension arms. Lowering the shock mounting position helps lower the center of gravity and generate additional rear traction, particularly on high-grip carpet and Astro tracks. Two mounting configurations allow the shocks to be positioned toward the inside or outside, giving racers another way to fine-tune rear suspension behavior. ⚡ Features: 🏁 Genuine XRAY performance option⬇️ Allows rear shocks to mount lower on the suspension arms🎯 Helps generate increased rear traction⚖️ Lowers the vehicle's center of gravity🔧 Inside or outside shock mounting options➡️ Arrow markings make mounting positions easy to identify💪 CNC-machined from premium Swiss 7075-T6 aluminum🪶 Lightweight and extremely durable construction⚫ Black anodized finish🏎️ Especially recommended for carpet and Astro surfaces🔩 Includes +2mm and +4mm longer shock ball joints 📦 Includes: (1) XRAY Rear Shock Absorber Adapter Set (1+1) +2mm Longer Shock Ball Joint +4mm Longer Shock Ball Joint 📏 Specifications: Part Number: 362390Material: Swiss 7075-T6 AluminumFinish: Black AnodizedPosition: RearApplication: Lower Shock Mounting / Suspension Tuning 🔧 Compatibility: XRAY documentation confirms 362390 across multiple current and recent platforms, including: ✅ XRAY XB2✅ XRAY XB4✅ XRAY XT4 XRAY's XB2 documentation specifically lists the 362390 adapter, and current XB4 documentation also shows it in the rear shock assembly. 💡 Pro Tip: This isn't just a replacement part—it's a setup option. Moving the rear shock mounting point lower can increase rear traction and lower CG, which is why XRAY particularly recommends these adapters for carpet and Astro racing. The two mounting alternatives give you additional flexibility when dialing in the rear of the car.

Read more less

 🏁 Precision Machined. Ultra-Durable. Genuine XRAY Performance. The XRAY Front Drive Axle is a genuine replacement drivetrain component designed for the XB4 and compatible XT4 platforms. XRAY manufactures this axle from its renowned HUDY Spring Steel™, providing the strength, durability, and precision required for competitive 1/10 scale racing. Designed for use on either the front left or front right, this axle is a direct replacement for the factory component. ⚡ Features: 🏁 Genuine XRAY replacement part💪 Manufactured from HUDY Spring Steel™⚙️ Precision-machined front wheel drive axle🎯 Designed for accurate drivetrain fit and operation🔧 Fits either front left or front right position🚀 Built for competition-level durability🛠️ Excellent replacement or race-day spare 📦 Includes: (1) XRAY Front Drive Axle 📏 Specifications: Part Number: 365240Material: HUDY Spring Steel™Position: Front Left or RightType: Front Drive Axle 🔧 Compatibility: Verified fitment includes: ✅ XRAY XB4 Original✅ XRAY XB4 2016✅ XRAY XB4 2017✅ XRAY XB4 2018✅ XRAY XB4 2019✅ XRAY XB4 2020✅ XRAY XB4 2021 Carpet✅ XRAY XB4 2021 Dirt✅ XRAY XT4 XRAY's newer documentation also continues to show 365240 in the XB4 front drivetrain, including the XB4 2024 manual and newer XB4 parts listings. 💡 Pro Tip: Front drive axles take significant load from acceleration, steering, and impacts. If you're replacing a damaged axle, check the drive shaft coupling, cross pin, wheel bearings, and wheel hub at the same time for wear or play.

Read more less

🏁 Lightweight Graphite Composite. LCG Differential Performance. Upgrade or replace the gear differential pulley/case on your XRAY with the 324954-G Graphite Composite Gear Differential Case with 53T Pulley. XRAY identifies this as the graphite optional version of the standard 324954 LCG differential component. Designed for XRAY's LCG gear differential, the graphite composite construction provides an optional alternative to the standard hard-composite version while retaining the factory 53-tooth configuration. ⚡ Features: 🏁 Genuine XRAY option part⚙️ Integrated 53-tooth gear differential pulley🪶 Graphite composite construction🔧 Designed for XRAY's LCG gear differential system🎯 Precision factory fitment🚀 Optional graphite version of standard part #324954🛠️ Excellent replacement or tuning component for your race-day parts box 📦 Includes: (1) XRAY LCG Graphite Composite Gear Differential Case with 53T Pulley 📏 Specifications: Part Number: 324954-GMaterial: Graphite CompositeTooth Count: 53TType: LCG Gear Differential Case / PulleyPosition: Rear Drivetrain 🔧 Verified Compatibility: ✅ XRAY XB2 2020 Carpet✅ XRAY XB2 2020 Dirt✅ XRAY XT2 2021 Carpet XRAY's own documentation also shows 324954-G as the optional graphite gear-differential pulley in later XB2 and XT2 LCG differential assemblies. 💡 Pro Tip: The important distinction here is the “-G” suffix. 324954 is the standard hard-composite 53T LCG component, while 324954-G is the optional graphite-composite version.

Read more less

 🏁 Lightweight. Precise. Genuine XRAY Replacement. Keep your XRAY steering system smooth and precise with the XRAY Composite Steering Plate. Designed specifically for XRAY's 1-piece chassis platforms, this factory steering plate provides the proper geometry and fit needed for consistent steering performance. XRAY lists 322574 as the hard composite steering plate included with the vehicle, with the aluminum 322575 available as the optional upgrade. ⚡ Features: 🏁 Genuine XRAY replacement component⚙️ Hard composite construction🪶 Lightweight design for minimal steering-system weight🎯 Maintains precise steering geometry🔧 Designed specifically for XRAY 1-piece chassis configurations🚀 Smooth, consistent steering operation🛠️ Direct replacement for the factory steering plate🏎️ Ideal for maintenance, rebuilds, or your race-day spare parts box 📦 Includes: (1) XRAY Composite Steering Plate 📏 Specifications: Part Number: 322574Material: Hard CompositeType: Steering PlateApplication: 1-Piece Chassis Steering System 🔧 Compatibility: Compatible with XRAY XB2 and XT2 models equipped with the applicable 1-piece chassis, including XB2 and XT2 platforms where 322574 is specified in the factory assembly. 💡 Pro Tip: If you're looking for additional steering-system strength and a more precise steering feel, XRAY offers the 322575 aluminum steering plate as the optional upgrade. XRAY notes that the aluminum version also provides increased clearance around the steering system for easier maintenance and setup adjustments.

Read more less

🏁 Genuine XRAY Replacement. Lightweight Composite. Precision Drivetrain Fit. Keep your XRAY drivetrain running smoothly with the XRAY XB2 LCG 38-Tooth Composite Gear. Designed for the LCG gear differential system, this genuine XRAY replacement component provides the precise fit and drivetrain performance expected from XRAY competition platforms. The lightweight composite construction helps keep rotating mass low while providing the durability needed for competitive 1/10 scale racing. ⚡ Features: 🏁 Genuine XRAY replacement part⚙️ 38-tooth composite gear🪶 Lightweight composite construction🎯 Precision molded for accurate fit and smooth operation🔧 Designed for the XRAY LCG gear differential system🚀 Helps maintain efficient and consistent drivetrain performance🛠️ Ideal replacement for worn or damaged differential components🏎️ Designed for competition-level 1/10 scale racing 📦 Includes: (1) XRAY LCG Composite Gear (38T) 📏 Specifications: Part Number: 324238Tooth Count: 38TMaterial: CompositeType: LCG Gear Differential Component 🔧 Compatibility: ✅ XRAY XB2 2020 Carpet✅ XRAY XB2 2020 Dirt✅ XRAY XT2 2021 Carpet 💡 Pro Tip: Differential and drivetrain gears experience constant load during acceleration and braking. If you're replacing a worn 38T gear, inspect the mating gears and differential components at the same time for damaged or rounded teeth. Keeping the complete gear set in good condition helps maintain a smooth, efficient drivetrain and consistent power delivery.

Read more less

 🏁 Factory Fit. Hard Composite. Precise Front-End Performance Keep your XRAY buggy performing with the precision and consistency it was designed for with the XRAY Hard Composite Front Roll Center Holder. This genuine XRAY replacement component is manufactured from hard composite material and designed to provide the correct mounting and geometry for the front roll center assembly. It's an ideal replacement for a worn or damaged component or a useful spare to keep in your race-day parts box. ⚡ Features: 🏁 Genuine XRAY replacement part💪 Hard composite construction🎯 Designed to maintain precise front suspension geometry⚙️ Supports the front roll center assembly🔧 Direct replacement for the original component🚀 Designed for consistent, competition-level performance🛠️ Great replacement or race-day spare 📦 Includes: (1) XRAY Hard Composite Front Roll Center Holder 📏 Specifications: Part Number: 322040-HMaterial: Hard CompositePosition: FrontType: Roll Center Holder 🔧 Compatibility: ✅ XRAY XB2 Original✅ XRAY XB2 Dirt✅ XRAY XB2 2017 Carpet✅ XRAY XB2 2017 Dirt✅ XRAY XB2 2018 Carpet✅ XRAY XB2 2019 Carpet✅ XRAY XB2 2019 Dirt✅ XRAY XB2 2020 Carpet✅ XRAY XB2 2020 Dirt✅ XRAY XT2 Original✅ XRAY XT2 2021 Carpet✅ XRAY XT2 2021 Dirt 💡 Pro Tip: The front roll center is an important part of suspension geometry and can affect steering response and overall chassis behavior. When replacing the holder, inspect the surrounding suspension hardware for wear or excessive play to help keep your XRAY's front end precise and consistent.

Read more less

🔧🏁 Replacement Composite Chassis Side Guards for XRAY XB2 & XT2 The XRAY Composite Bent Side Chassis Side Guards are genuine replacement components originally designed for the XB2C 2020 Carpet Edition and XB2D 2020 Dirt Edition buggy kits. These molded composite guards provide factory-fit protection along the sides of the chassis while maintaining the proper profile and fit of the vehicle. Also compatible with select XRAY XT2 platforms, this two-piece set is ideal for replacing worn or damaged side guards during a rebuild or routine maintenance. 🏁 About the Chassis Side Guards ⚙️ Bent Side Design The molded bent-side profile is designed to follow the chassis layout of compatible XRAY platforms, providing proper coverage while maintaining clearance for the vehicle's internal components. 🔧 Factory Replacement Fit Designed as genuine XRAY replacement parts, these guards install in place of the original components for a clean, precise fit. 🔧 Features Genuine XRAY replacement chassis components Composite construction Bent-side design Helps protect the sides of the chassis Precision molded for factory fitment Two-piece set Direct replacement for compatible XRAY platforms Ideal for maintenance, rebuilds, or race-day spares 📦 Includes (2) XRAY Composite Bent Side Chassis Side Guards 📊 Product Details Specification Details Brand XRAY Part Number 321250 Product Type Chassis Side Guards Material Composite Design Bent Side Quantity 2 🚙 Compatibility XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XT2 2021 Carpet XRAY XT2 2021 Dirt

Read more less

🔧🏁 Hard Composite Replacement C-Hubs for XRAY XB2 & XT2 The XRAY Composite C-Hub is a genuine replacement suspension component for compatible XRAY XB2 and XT2 1/10 competition platforms. Constructed from XRAY's durable Hard composite material, these C-hubs provide precise factory fitment and a rigid, responsive front suspension setup. Choose the Right or Left side needed for your vehicle. ⚙️ Choose Your Side Right C-Hub – 322210-H Left C-Hub – 322220-H 🔧 Features Genuine XRAY replacement C-hub Available in Right or Left Hard composite construction Durable and rigid design Precision molded for proper fitment Maintains factory front suspension geometry Direct replacement for compatible XRAY platforms Ideal for repairs or race-day spares 📦 Includes (1) XRAY Hard Composite C-Hub in selected Right or Left configuration 📊 Product Details Specification Details Brand XRAY Product Type C-Hub Material Composite Compound Hard Right Part Number 322210-H Left Part Number 322220-H Position Front – Right or Left 🚙 Compatibility XRAY XB2 Original XRAY XB2 Dirt XRAY XB2 2017 Carpet XRAY XB2 2017 Dirt XRAY XB2 2018 Carpet XRAY XB2 2019 Carpet XRAY XB2 2019 Dirt XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XT2 Original XRAY XT2 2021 Carpet XRAY XT2 2021 Dirt

Read more less

🔧🏁 Medium-Compound Rear Suspension Arm for XRAY XB2 & XB4 The XRAY Left Rear Lower Suspension Arm is a genuine replacement suspension component designed for compatible XRAY XB2 and XB4 1/10 competition buggies. Molded from XRAY's Medium composite compound, this arm provides the standard balance of durability, flex, and suspension response for both carpet and dirt racing applications. Precision molded for direct factory fitment, it's an ideal replacement for a worn or damaged suspension arm or a useful spare to keep ready in your pit box. 🏁 About the Medium Suspension Arm ⚙️ Medium Composite Compound XRAY offers these suspension arms in multiple compounds, including Medium, Hard, and Graphite. This Medium version provides the standard compound option for a balanced combination of flex and durability. 🔧 Factory Fitment Designed for compatible XB2 and XB4 platforms, the arm installs directly while maintaining XRAY's intended rear suspension geometry and mounting locations. 🔧 Features Genuine XRAY replacement suspension component Left rear lower suspension arm Medium composite compound Balanced flex and durability Precision molded construction Direct factory fitment Maintains proper suspension geometry Suitable for carpet and dirt racing Compatible with select XB2 and XB4 platforms Great replacement or race-day spare 📦 Includes (1) XRAY Left Rear Lower Suspension Arm – Medium 📊 Product Details Specification Details Brand XRAY Part Number 363122-M Product Type Rear Lower Suspension Arm Position Left Rear Compound Medium Application XRAY XB2 / XB4 🚙 Compatibility XRAY XB2 2021 Carpet XRAY XB2 2021 Dirt XRAY XB2 2023 Carpet XRAY XB2 2023 Dirt XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB4 2020 XRAY XB4 2021 Carpet XRAY XB4 2021 Dirt XRAY XB4 2023 Carpet XRAY XB4 2023 Dirt XRAY XB4 2024 Carpet XRAY XB4 2024 Dirt

Read more less