💧🔧 Restore Factory Receiver Box Protection The Traxxas Receiver Box Seal Kit is a genuine replacement service kit designed to restore the waterproof and dust-resistant seal of compatible Traxxas receiver boxes. Whether you're rebuilding your receiver box after maintenance or replacing worn seals, this kit includes the essential components needed to maintain reliable protection for your receiver and electronics. Keep your electronics protected from water, dirt, mud, and debris with fresh factory seals. 🏁 About the Receiver Box Seal Kit 💧 Maintain Electronics Protection Over time, receiver box seals can become worn or damaged. This kit helps restore the original sealing performance to help protect sensitive electronics. 🔧 Genuine Traxxas Replacement Components Includes factory replacement seals and silicone grease to ensure proper installation and long-lasting performance. 🏎️ Ideal for Maintenance & Rebuilds Perfect for: Receiver box service Vehicle rebuilds Electronics maintenance Replacing damaged seals 🔧 Features ✔ Genuine Traxxas replacement seal kit✔ Restores receiver box sealing performance✔ Helps protect electronics from water and debris✔ Includes replacement O-ring and seals✔ Silicone grease included for proper installation✔ Easy maintenance solution✔ Direct replacement components 📦 Includes (1) O-Ring Receiver Box Seals Silicone Grease 🚗 Compatibility Traxxas Drag Slash Traxxas E-Revo VXL 2.0 Traxxas Revo Nitro Traxxas Slash 2WD Traxxas Slash Late Model Traxxas Slash Modified 💡 Perfect For ✔ Receiver box maintenance✔ Waterproofing restoration✔ Vehicle rebuilds✔ Electronics protection✔ Preventative maintenance ⚠️ Notes Designed for compatible Traxxas receiver boxes Verify compatibility before installation Receiver box sold separately

Read more less

💧📡 Protect Your Electronics from Dirt, Dust & Moisture The Traxxas Sealed Receiver Box Set is a genuine replacement receiver box designed to protect your radio system from water, dirt, mud, and debris. Built to Traxxas specifications, this sealed enclosure helps keep your receiver secure and protected while maintaining reliable radio performance in demanding conditions. Perfect for replacing a damaged receiver box or restoring factory waterproof protection. 🏁 About the Sealed Receiver Box Set 💧 Waterproof Protection The sealed receiver box helps shield your receiver from: Water Mud Dirt Dust Debris 📡 Secure Electronics Housing Designed to securely mount and protect your receiver while maintaining clean wire routing and dependable operation. 🔧 Genuine Traxxas Replacement Manufactured to factory specifications for direct fit and easy installation. 🔧 Features ✔ Genuine Traxxas replacement part✔ Sealed design helps protect receiver electronics✔ Helps keep out water, dirt, and debris✔ Direct replacement for factory receiver box✔ Durable molded construction✔ Easy installation✔ Maintains factory electronics protection 📦 Includes (1) Traxxas Sealed Receiver Box Set 🚗 Compatibility Traxxas Drag Slash Traxxas E-Revo VXL 2.0 Traxxas Revo Nitro Traxxas Slash 2WD Traxxas Slash Late Model Traxxas Slash Modified 💡 Perfect For ✔ Replacing damaged receiver boxes✔ Restoring waterproof protection✔ Race-day maintenance✔ Off-road driving conditions✔ Protecting sensitive electronics ⚠️ Notes Genuine Traxxas replacement part Verify compatibility before installation Receiver and electronics not included

Read more less

🔴🏁 Add Custom Style & Increased Durability to Your Traxxas Vehicle The Traxxas Aluminum Antenna Crimp Nut & Antenna Nut Tool Set is a premium aluminum upgrade designed to replace the factory antenna hardware while adding durability and custom appearance. Finished in Traxxas red anodizing, this upgrade provides a direct bolt-on replacement with no modifications required. Part of the Traxxas aluminum accessory lineup, this set enhances both the appearance and ruggedness of your vehicle while providing the convenience of the included antenna nut installation tool. 🏁 About the Antenna Crimp Nut Set 🔧 Premium Aluminum Construction Manufactured from durable aluminum for: Increased strength Improved durability Enhanced appearance Long-lasting performance 🔴 Custom Traxxas Styling The red anodized finish adds a factory-custom look that complements other Traxxas aluminum upgrade components. ⚙️ Direct Replacement Installation Installs directly in place of the factory antenna crimp nut with no modifications required. 🔧 Features ✔ Genuine Traxxas upgrade part✔ Precision-machined aluminum construction✔ Red anodized finish✔ Direct replacement for factory antenna crimp nut✔ Improves durability and appearance✔ No modifications required✔ Includes antenna nut installation tool✔ Lightweight and corrosion resistant 📦 Includes (1) Aluminum Antenna Crimp Nut (1) Antenna Nut Tool 🚗 Compatibility Traxxas Drag Slash Traxxas E-Revo VXL 2.0 Traxxas Jato Traxxas Nitro 4-Tec Traxxas S-Maxx Traxxas Slash 2WD Traxxas Slash 4X4 Traxxas Slash Modified Traxxas Stampede 4X4 Traxxas T-Maxx 💡 Perfect For ✔ Customizing your Traxxas vehicle✔ Replacing worn antenna hardware✔ Aluminum upgrade builds✔ Race and show vehicles✔ Matching Traxxas red aluminum accessories ⚠️ Notes Direct replacement part No modifications required Verify compatibility before installation

Read more less

Traxxas 4mm Aluminum Flanged Serrated Locknuts (4-Pack) Part #: 1747G / 1747R / 1747T / 1747A / 1747PAvailable Colors: Green, Red, Blue, Black, Purple Add both function and flair to your RC build with Traxxas Aluminum 4mm Flanged Locknuts! These serrated, anodized locknuts offer a lightweight, high-strength upgrade that resists loosening from vibration—perfect for racers and bashers alike. 📦 Includes: (4) 4mm Aluminum Flanged Serrated Locknuts (choose color) ✅ Features: CNC-machined from lightweight 6061-T6 aluminum Anodized finish for brilliant color and corrosion resistance Serrated flange helps grip plastic or metal surfaces securely Adds a high-performance, custom look to your RC rig Fits standard 4mm threaded axles and components Compatible with most Traxxas 1/10 scale vehicles 🎨 Dress up your build and lock in performance—available in multiple colors to match your style!

Read more less

1up Racing 7075 Aluminum Lockdown M4 Wheel Nuts – Ultra-Light, Ultra-Secure! Upgrade your RC wheels with the 1up Racing 7075 Aluminum Lockdown M4 Wheel Nuts, our lightest and most vibrant wheel nuts yet! Inspired by the smooth lines of the legendary SoCal Hot Rod scene, these precision-machined aluminum nuts bring a sleek, high-performance look to your ride. Designed with race-proven technology, they feature mirror-like chamfer details, a floating hex for perfect wrench engagement, and an oversized 11mm serrated flange for maximum bite and security. Built from premium 7075 aluminum, these wheel nuts deliver durability, style, and lightweight efficiency—all in one package! Key Features: ✅ Premium 7075 Aluminum Construction – Lightweight yet highly durable for long-lasting performance.✅ CNC Machined Serrations – Maximum bite and wheel security, even in the toughest conditions.✅ Oversized 11mm O.D. Flange – Enhances grip and prevents wheel slippage under extreme loads.✅ Low-Profile, Floating Hex Design – Perfect wrench engagement and streamlined aesthetics.✅ 7mm Outer Hex & M4x0.7mm Threads – Universal fit for a wide range of RC vehicles.✅ Mirror-Like Chamfered Edges – Shines under light for an unmistakable high-end finish.✅ Available in 10 Bold Anodized Colors – Customize your RC with stunning color options. In the Box: (4) 1up Racing 7075 Aluminum Lockdown M4 Wheel Nuts Secure. Lightweight. Race-Ready. Don’t let inferior wheel nuts slow you down—lock in your wheels with the best in the game! The 1up Racing 7075 Aluminum Lockdown Wheel Nuts deliver unrivaled performance, security, and style, making them a must-have upgrade for any serious racer or enthusiast. 🔥 Order now and give your ride the 1up it deserves! 🏁💨

Read more less

Traxxas Suspension Screw Pin Set, Steel (VXL) – Part #3640🔩 Secure the Suspension. Drive with Confidence. Keep your suspension tight and true with this steel screw pin set from Traxxas. Designed for VXL vehicles, these pins are used at the pivot points of suspension arms, providing reliable articulation and strength where it matters most. ✅ Precision-machined steel for durability✅ Factory fit for Traxxas VXL platforms✅ Essential for suspension rebuilds and maintenance 📦 Includes: (1) Suspension Screw Pin Set 💡 Pro Tip: Upgrading to steel screw pins is a simple way to increase long-term durability and reduce play in your suspension system.

Read more less

Lightweight. Grippy. Colorful. Affordable. Upgrade your wheels without draining your wallet! BOOF RC M4 Flange Lock Nuts deliver rock-solid wheel security with a lightweight, race-ready design — perfect for high-grip tracks, brutal bashing sessions, and everything in between. Precision machined from high-quality aluminum and finished in bold anodized colors, these nuts keep your wheels locked down tight while adding a clean, custom look to your ride. Engineered for strong bite and consistent performance, so you stay focused on driving — not chasing wheels across the track. Key Features: ✅ Lightweight Aluminum Construction – Reduce rotating mass, increase performance.✅ Serrated Flange Design – Bites into the wheel for improved grip and security.✅ Low-Profile, Race-Ready Shape – Clean look that stays clear of obstacles.✅ 7mm Hex & M4 Thread – Fits most 1/10 scale vehicles (buggy, truck, touring, drift, etc.).✅ Vibrant Anodized Colors – Customize your setup with bold, high-contrast hardware.✅ Engineered for Everyday Abuse – Strong bite without stripping or backing off. Available Colors: 🟥 Red⬛ Black🩶 Titanium🟦 Royal Blue🩵 Light Blue 🟩 Green🟪 Purple⭐ Gold🤍 Silver (Availability may vary) Includes: (4) BOOF RC Aluminum M4 Flange Lock Nuts Perfect For: 1/10 Off-Road Racing Drift builds Street bashers Scale and comp crawlers Touring cars Track cars Whether you're racing, drifting, or crawling — these nuts keep your wheels firmly planted and looking sharp. BOOF RC: Premium Parts. Not Premium Prices. We don’t pretend our hardware is magic — just solid, race-worthy gear at a price that makes sense.Spend less on nuts, more on tires and track time. 🏁 🔥 Lock it down. Stand out. Go race. Grab a set of BOOF M4 Lock Nuts today and give your ride some BOOF-grade hardware swagger!

Read more less

Traxxas Front Hex Wheel Hub (2) – Part #3654🔧 Keep Your Front End Dialed In. The Traxxas 3654 Front Hex Wheel Hubs are direct replacements for your worn or damaged originals. Designed for a precise factory fit, these hubs ensure your front wheels stay securely mounted and spinning true. Includes the necessary axle pins for a quick, hassle-free install. ✅ Includes two front hex hubs and two axle pins✅ Factory fit for Traxxas 2WD models✅ Keeps wheels aligned and properly secured✅ Easy to install – get back on track in minutes 📦 Includes: (2) Front Hex Wheel Hubs (2) Axle Pins 💡 Pro Tip: Always inspect your hubs and pins for wear—keeping them fresh ensures consistent handling and durability on race day.  

Read more less

Traxxas 5x8x0.5mm Teflon Washers (20) Part #: 1985 Ensure smoother performance and reduced friction with Traxxas PTFE-Coated Teflon Washers. These 5x8x0.5mm washers are designed to be used with ball bearings, helping to extend bearing life and improve overall drivetrain efficiency. ✅ Features: PTFE (Teflon) coating for low friction and long wear Ideal for use with 5x8mm ball bearings Helps reduce heat and drag in rotating components Precision-manufactured for consistent fit and function 📦 Includes: (20) 5x8x0.5mm PTFE-Coated Teflon Washers 🛠️ Perfect for racers and bashers alike — upgrade your RC performance with these ultra-low friction washers from Traxxas!

Read more less

1up Racing 7075 Aluminum Flanged Locknuts – M3 Upgrade your RC build with 1up Racing 7075 Aluminum Flanged Locknuts, engineered for maximum durability, lightweight performance, and striking aesthetics. Inspired by the smooth lines of the SoCal Hot Rod scene, these locknuts feature mirror-like chamfer details, a floating hex for optimal wrench engagement, and an oversized 11mm serrated flange for unbeatable security. Precision CNC-machined from premium 7075 aluminum, these locknuts deliver exceptional strength and longevity while keeping weight to a minimum. Available in 10 bold anodized colors, they add the perfect finishing touch to any setup. Key Features: ✅ Premium 7075 Aluminum Construction – Lightweight yet highly durable for long-lasting performance.✅ CNC Machined Serrations – Superior bite and maximum security for worry-free racing.✅ Oversized 11mm O.D. Flange – Enhances grip and stability, preventing wheel slippage.✅ Low-Profile Design – Keeps weight low and ensures a clean, streamlined look.✅ Floating Hex Design – Optimal wrench engagement for easy, secure installation.✅ 7mm Outer Hex & M4x0.7mm Threads – Standard fitment for hassle-free compatibility.✅ Mirror-Like Chamfered Edges – Glistens under light, giving your ride an unmistakable premium touch.✅ Available in 10 Bold Anodized Colors – Customize your RC with a style that stands out. In the Box: (4) 1up Racing 7075 Aluminum Flanged Locknuts – M3 Precision, Performance & Style! Don’t settle for ordinary—elevate your RC with 1up Racing’s lightest and most colorful flanged locknuts. With race-proven performance, premium materials, and unmatched style, these locknuts are the perfect finishing touch for any build. 🔥 Order today and 1up your ride! 🏁💨

Read more less

Traxxas Stub Axle Pins (4) – Part #2754🔩 Secure Your Power. Stay Locked In. Keep your wheels connected and your drivetrain dialed with the Traxxas Stub Axle Pins. These precision replacement pins are designed to fit through the axle stub and lock securely into the wheel hubs—ensuring reliable performance run after run. ✅ Genuine Traxxas replacement part✅ Compatible with rear axle stubs✅ Keeps wheel hubs securely mounted✅ Ideal for routine maintenance or repair 📦 Includes: (4) Stub Axle Pins

Read more less

1up Racing 7075 LowPro Wing Washers – Lock It Down with Low-Profile Precision 💥 Keep your wing tight and your style tighter with the 1up Racing 7075 LowPro Wing Washers – the go-to choice for elite racers and style-focused builders. Whether you're launching off-road or speeding down the straight, these precision-machined aluminum washers are built to perform and look incredible doing it. 💪 Designed with no cutouts to trap dirt and an oversized 14mm diameter to reduce wing flex, these washers boost rear-end stability and give your ride that unmistakable 1up edge. ✨ Key Features: 🔩 7075 High-Strength Aluminum – Lightweight and tough enough for brutal landings📏 Low-Profile Design – No cutouts = no dirt buildup🌀 14mm Outer Diameter – Minimizes wing flex for consistent aero performance🎨 Available in 10 Anodized Colors – With mirror-like chamfered edges for that clean, pro look💡 Drag Car Ready – Clean body mount solution with aerodynamic benefit 📦 What’s Included? ✔️ (2) 7075 LowPro Wing Washers in your chosen color Note: Use with standard M3 flat head screws (not included). Slight screw head protrusion helps preserve the anodized finish. 🏁 Stay Locked. Stay Clean. Stay Fast. Whether you're racing, bashing, or building to win, the 1up Racing LowPro Wing Washers deliver race-ready function and next-level style. 💡 Finish Your Build Right – Add 1up Wing Washers to Your Setup Today!

Read more less

  Traxxas X-Maxx 17mm Splined Wheel Nuts (4) – Part 7758Lock In Power. Add a Pop of Color. The Traxxas 17mm Splined Wheel Nuts (7758) are designed specifically for the X-Maxx, offering a secure, no-slip hold on your wheels—even under extreme torque. With a unique splined design and anodized aluminum finish, these nuts add both function and style to your build. ✅ Set of 4 aluminum splined wheel nuts✅ 17mm fitment – designed for the X-Maxx✅ Splined design – extra grip to prevent wheel spin and stripping✅ Durable anodized finish – built for abuse and corrosion resistance✅ Available in 6 bold colors: Blue, Green, Red, Orange, Black, and Gray✅ CNC-machined aluminum – lightweight and strong 📦 Includes: (4) 17mm Splined Wheel Nuts Part #: 7758 Choose your color: Blue, Green, Red, Orange, Black, or Gray 💡 Pro Tip: Use matching aluminum accents like hubs or caps to complete the look and protect key components.  

Read more less

Dial in your aero and add a clean, pro finish to your 1/10 RC build with BOOF RC Wing Washers.These lightweight aluminum washers reinforce your wing mounting points, preventing cracks, pull-through, and premature wear — especially on high-downforce setups. Designed for racers who want performance, durability, and style without paying premium brand prices. Features: ✔️ Lightweight Aluminum Construction – Strong and low-mass for optimal wing support ✔️ Reduces Wing Damage – Prevents cracking and screw pull-through ✔️ CNC Machined Finish – Clean fitment with a premium look ✔️ Multiple Color Options – Customize your style ✔️ Easy Bolt-On Upgrade – Works with standard 1/10 wing hardware Specs: Fitment: 1/10 RC (buggy, touring, drift, basher) Material: Aluminum Hardware: M3 mounting compatible Pack: 2pcs (one pair) Available Colors: 🟥 Red⬛ Black🩶 Titanium🟦 Royal Blue🩵 Light Blue 🟩 Green🟪 Purple⭐ Gold🤍 Silver (Availability may vary) In the Pack: (2) BOOF RC Aluminum Wing Washers Perfect For: 1/10 Buggies 1/10 Touring & Drift High-downforce setups Bashers that break wings often Why BOOF RC? Affordable, clean, functional upgrades — without the silly markup.  

Read more less

🔩 Secure Your Hardware with ConfidenceThe ProTek RC Blue Thread Lock (Medium) is the ultimate solution for preventing hardware from loosening due to vibration or shock. Formulated for precision RC applications, this medium-strength thread locker is ideal for securing metal screws, nuts, and bolts — while still allowing easy disassembly with standard hand tools when needed. ⚙️ About the ProTek RC Blue Thread Lock Designed for both electric and nitro RC models, this medium-viscosity formula creates a strong bond that resists loosening under extreme conditions. It’s perfect for drivetrain components, suspension hardware, and any part exposed to constant vibration. In addition to its holding power, it prevents rust and corrosion, keeping your fasteners clean and reliable over time. 🌟 Features Medium strength — secures fasteners yet allows easy removal Resists shock and vibration for consistent reliability Prevents rust and corrosion on metal threads Cures without air exposure — sets in 10 minutes, full cure in 24 hours Ideal for RC vehicles, drones, and aircraft 🧴 Specifications Size: 0.34 fl oz (10ml) Strength: Blue (Medium) Cure Time: 10 minutes initial set / 24 hours full cure Removable: Yes Compatible Fasteners: Non-plastic screws, nuts, bolts 📦 Includes (1) 0.34 fl oz bottle of ProTek RC Blue Thread Lock (Medium Strength) 💪 Keep your rig tight, precise, and race-ready — ProTek RC Blue Thread Lock is your defense against loose hardware.

Read more less

Traxxas 4mm Locknuts (10-Pack) Part #: 1747 | Secure Fit for Your RC Wheels & Components The Traxxas 1747 4mm Locknuts are designed to keep your wheels and components securely in place under extreme RC conditions. Built for strength and vibration resistance, these locknuts are a must-have for racers and bashers alike. 📦 Includes: (10) 4mm Locknuts ✅ Features: Nylon-insert locknut design resists loosening from vibration Standard 4mm thread size for broad compatibility Ideal for wheel nuts, suspension arms, and more Fits a wide range of Traxxas vehicles Durable metal construction

Read more less

Traxxas 3x8mm Button Head Machine Screws (6) – Part #2576🔩 Essential Hardware. Universal Fit. Keep your rig dialed with this 6-pack of Traxxas 3x8mm Button Head Screws. Designed for a clean, low-profile finish and built to handle tough conditions, these machine screws are perfect for a wide range of RC applications—including the Traxxas Revo and beyond. ✅ Button head design for a sleek and secure hold✅ Machine thread for metal or tapped plastic✅ Universal fit across many Traxxas vehicles✅ A great go-to screw for any pit box 📦 Includes: (6) 3x8mm Button Head Machine Screws 

Read more less

🔧 Quick-Access Body and Battery RetentionThe Team Associated B6 Thumbscrews are genuine replacement parts designed for the RC10 B6 and B6D buggies. These thumbscrews provide a secure and tool-free solution for fastening body mounts or battery straps — making maintenance and adjustments faster than ever. ⚙️ About the Thumbscrews Constructed from durable composite material with precision-molded threads, these thumbscrews ensure a tight and reliable hold while allowing easy removal by hand. Whether you’re making quick pit adjustments or swapping batteries between heats, these are a must-have for convenience and performance. 🌟 Features Direct replacement for RC10 B6 and B6D thumbscrews Tool-free installation and removal Durable composite construction for long life Provides secure hold for battery straps or body mounts Designed for quick pit adjustments Includes: (2) Team Associated B6 Thumbscrews Compatibility: Team Associated RC10 B6 Team Associated RC10 B6D & more 🧰 Simple, strong, and efficient — these thumbscrews keep your buggy race-ready with no tools required.  

Read more less

Overview:Introducing the 1up Racing 7075 Aluminum Locknuts (M3) – the ultimate combination of strength, style, and lightweight performance. Precision-crafted from high-quality 7075 aluminum, these locknuts deliver the durability you need while saving weight where it counts. Each nut features a tight-fitting nylon insert that locks in place to keep everything secure, even under extreme R/C racing conditions. Choose from 10 bold anodized colors to match your build’s style and make your ride stand out! Features: Includes 8 locknuts per package Premium 7075 aluminum construction for strength and lightweight performance 5.5mm outer hex for easy installation M3 x 0.5mm threads (fits standard M3 hardware) Nylon lock inserts prevent loosening over time Available in 10 stunning anodized finishes for maximum style Compatibility: Fits most 1/10 and 1/8 scale R/C applications requiring M3 locknuts Perfect for off-road buggies, stadium trucks, touring cars, crawlers, drones, and more

Read more less

Replacement high-strength steel cup style set screws designed for RC applications requiring secure and reliable fastening. Ideal for use in pinion gears, drive components, and general maintenance. ✅ 3mm thread diameter✅ 4mm length✅ Cup style tip for secure grip✅ High-strength steel construction✅ Suitable for various RC applications 📦 Includes:(10) 3x4mm cup style set screws  

Read more less

Traxxas 3x8mm Flat Head Screw (6) (VXL) – Part #3931🔩 Secure Fit. Clean Finish. The Traxxas 3x8mm Flat Head Screws are precision-machined for a flush, low-profile installation. Ideal for use in VXL and other Traxxas vehicles, these flat head screws ensure a snug, countersunk fit for components where a smooth finish is essential. ✅ Perfect for flush-mount applications✅ 3x8mm metric sizing✅ Flat head design for clean installation✅ Genuine Traxxas quality✅ Great for chassis, body panels, and more 📦 Includes: (6) 3x8mm Flat Head Screws 💡 Pro Tip: Always check your manual for proper screw placement and thread-lock recommendations for metal-on-metal applications.  

Read more less

🔩 A simple upgrade to replace your stock plastic hexes with aluminum for added durability and a more secure wheel fit. 🔧 Highlights: ✔ 12mm hex design✔ Aluminum construction✔ Direct replacement for Traxxas 3654✔ Helps reduce wear from repeated wheel changes✔ Easy install 🚗 Compatibility: • 1/10 Traxxas Mini Maxx 🔧 Simple upgrade. Solid fit. Ready to run.BOOF RC – No nonsense. Just works.  

Read more less

Refresh your build with the Hot Racing Steel Hardware Set for the Axial SCX30. This complete replacement kit swaps the factory hardware for durable steel fasteners, improving strength, reliability, and long-term durability—especially important for hard crawling and frequent maintenance. Features & Benefits: Full steel hardware set for added strength Direct replacement for factory screws Improves durability and resistance to stripping Ideal for rebuilds, upgrades, or maintenance refreshes Compatibility: Axial SCX30 (1/30 scale) Includes: Complete steel hardware set for Axial SCX30 A simple, practical upgrade to keep your SCX30 tight, reliable, and trail-ready.  

Read more less

Keep your Mini-Z performing at its best with the Kyosho MR-04 EVO 2 Screws Set. This genuine Kyosho replacement hardware set includes all the screws needed for maintaining or rebuilding your MR-04 EVO 2 chassis. Perfect for racers and hobbyists who demand precision fit and factory-quality reliability. ⚙️ Features: Genuine Kyosho replacement hardware set Designed specifically for MR-04 EVO 2 platforms Includes all essential screws for rebuilds and maintenance Ensures proper fitment, alignment, and durability 📦 Includes: (1) Kyosho MR-04 EVO 2 Screws Set  

Read more less

Replacement high-strength steel button head screws designed for RC maintenance and assembly. Suitable for a wide range of applications requiring durable and secure fastening. ✅ 3mm thread diameter✅ 8mm length✅ Button head design✅ High-strength steel construction✅ Suitable for various RC applications 📦 Includes:(10) 3x8mm button head screws  

Read more less

Replacement high-strength steel button head screws designed for RC maintenance and assembly. Suitable for a wide range of applications requiring durable and secure fastening. ✅ 3mm thread diameter✅ 14mm length✅ Button head design✅ High-strength steel construction✅ Suitable for various RC applications 📦 Includes:(10) 3x14mm button head screws  

Read more less

Overview:Upgrade your touring car with the ultimate combination of lightweight performance and precision engineering. The 1UP Racing Pro Duty Titanium Lower Shock Screws are built for racers who demand strength, accuracy, and efficiency on every lap. CNC-machined from aerospace-grade titanium, these screws eliminate unnecessary unsprung weight while providing unmatched reliability and alignment accuracy for your shocks. About the Pro Duty Titanium Lower Shock Screws Titanium Strength AdvantagePrecision-machined from 6AL4V Grade 5 titanium, each screw delivers exceptional strength and corrosion resistance at a fraction of the weight of steel. The LH (left-hand) threads ensure the screws stay locked in place, even through long mains and rough track conditions. A thin integrated flange keeps the shock eye perfectly centered, while a deep 1.5 mm hex ensures consistent torque and tool engagement over countless installs. Designed specifically for plastic or composite suspension arms, these Pro Duty screws are race-proven and trusted by top-level drivers for their consistent feel and superior longevity. Features Ultra-lightweight — just 0.93 g per set of four Aerospace-grade 6AL4V (Grade 5) titanium construction CNC-machined for perfect precision Left-hand threads prevent loosening under load Built-in flange keeps shocks centered Deep 1.5 mm hex resists rounding Stronger, lighter, and more durable than steel hardware Compatible with most 1/10-scale touring cars Includes (4) Pro Duty Titanium 1/10 On-Road Lower Shock Screws Team Associated RC10 B6.4D Includes: (1) Complete Titanium Upper Screw Set (for RC10 B6.4/B6.4D)  

Read more less

Overview:The Traxxas Shim Set is designed for fine-tuning suspension geometry and adjusting roll center on select Traxxas vehicles. These precision shims allow racers and bashers alike to dial in suspension performance for optimal cornering and stability. The set also includes hollow balls for the inner camber links, providing smooth suspension movement and reliable alignment. Features Genuine Traxxas replacement and tuning part Adjusts suspension roll center for improved handling Includes hollow balls for inner camber links Durable construction for long service life Ideal for fine-tuning track or off-road performance Includes (4) Suspension shims (4) Hollow balls for inner camber links Compatibility Traxxas Drag Slash Traxxas Jato Traxxas Rustler 2WD Traxxas Slash 2WD Traxxas Slash Modified Traxxas Stampede 2WD Traxxas TRX-6 Traxxas Telluride 4x4

Read more less

Keep your Traxxas vehicle race-ready with this genuine Traxxas 3x15mm Button Head Screw Set. Perfect for maintenance or repairs, these durable steel screws are precision-made for a perfect fit in your model. Features: Genuine Traxxas replacement hardware Durable steel construction for long-lasting strength Ideal for repairs, maintenance, and custom builds Precision fit ensures reliable performance Includes:(6) 3x15mm Button Head Screws Compatibility: Traxxas Rustler Traxxas Stampede Also fits various other Traxxas 1/10-scale models    

Read more less

Small parts. Big strength.These Traxxas 4x10mm Button Head Machine Screws are precision-made for strength, fit, and durability. Perfect for maintenance, repairs, or custom builds, they’re designed to fit a wide range of Traxxas vehicles — including the legendary Revo® — and countless other RC applications. Built for ReliabilityCrafted from high-quality steel, these screws feature a smooth button head for a clean, finished look and a secure hold. Ideal for chassis assembly, suspension components, and accessories where strength and style matter. 💪 Features: Genuine Traxxas hardware for perfect fit and finish Strong steel construction for long-lasting use Button head design for smooth, low-profile appearance Ideal for a variety of RC maintenance and upgrade applications 📦 Includes: (6) 4x10mm Button Head Machine Screws ✅ Compatibility: Fits Traxxas Revo® and most other Traxxas models Universal fit for general RC applications    

Read more less

🔧 Comprehensive Replacement Hardware for the RC28RKeep your micro racer dialed in with the Team Associated RC28R Specialty Hardware Set, a 30-piece kit packed with essential small components used throughout the RC28R chassis. ⚙️ About the Hardware Set This specialty set includes a mix of precision fasteners, clips, and small hardware designed to maintain your vehicle’s structural integrity and reliability. Whether you’re performing routine maintenance, rebuilding your chassis, or replacing lost hardware, this kit ensures you have the exact factory parts you need. 🌟 Features Complete factory replacement hardware kit Includes critical small fasteners and specialty pieces used across the RC28R chassis Precision-machined components ensure a perfect fit Durable steel and composite materials resist wear and vibration Ideal for maintenance, rebuilds, or spare parts boxes Includes: (30) RC28R Specialty Hardware Components Compatibility: Team Associated RC28R Team Associated RC28 🧰 A must-have kit for every RC28R owner — keep your vehicle secure, smooth, and race-ready with genuine Team Associated specialty hardware.  

Read more less

🔩 Essential Replacement Set Screws for Your RC28RMaintain precision and reliability with the Team Associated RC28R M2 Set Screw Hardware Set — a genuine factory replacement kit designed to keep your micro racer performing at its best. ⚙️ About the Hardware Set These M2 set screws are crucial for securing key drivetrain and suspension components throughout your RC28R. Made from high-strength steel, they deliver a tight, durable fit that resists vibration and loosening during high-performance runs. 🌟 Features Factory replacement M2 set screws for the RC28R Perfect for drivetrain, suspension, and linkage applications Precision-machined threads for smooth, reliable installation Durable steel construction ensures long-lasting performance Ideal for repairs, rebuilds, and maintenance kits Includes: (1) M2 Set Screw Hardware Set Compatibility: Team Associated RC28R Team Associated RC28 🧰 Stay race-ready — replace worn or lost set screws with this precision-engineered Team Associated hardware set and keep your RC28R running smooth and secure.    

Read more less

🔧 Precision Hardware for a Clean, Flush FitKeep your RC28R in peak condition with the Team Associated 2mm Flat Head Hardware Set — a premium collection of replacement screws engineered for strength, precision, and seamless installation. ⚙️ About the Screw Set These flat head screws are designed to sit flush with the surface, offering a clean look and improved aerodynamics while maintaining a solid, vibration-resistant hold. Perfect for racers and hobbyists who demand both performance and polish from their builds. 🌟 Features Comprehensive 30-piece replacement set Flat head design for smooth, flush mounting Precision-machined threads ensure secure fastening Durable steel construction resists wear and stripping Ideal for repairs, rebuilds, or custom RC projects Includes: (30) 2mm Flat Head Hardware Screws Compatibility: Team Associated RC28R Team Associated RC28 Suitable for other 1/28-scale RC builds requiring 2mm flat head screws 🧰 Essential for every pit box — restore, rebuild, or refine your micro racer with genuine Team Associated hardware built for precision and reliability.  

Read more less

Keep your Traxxas vehicles running strong with this genuine set of button-head machine screws. At 3x14mm, these precision-engineered screws are perfect replacements for stock hardware and ensure a secure fit on your build. Whether you’re repairing, upgrading, or customizing, Traxxas hardware delivers the durability and reliability you need. Features: Genuine Traxxas replacement part Button-head machine screws, 3x14mm Pack of 6 screws included High-quality steel construction for long-lasting use Includes:(6) 3x14mm Button-Head Machine Screws Compatibility:Used across a wide range of Traxxas vehicles. Check your model’s manual to confirm exact fit.    

Read more less

🔧 Built to handle the toughest hits! The Traxxas 9042 Extreme Heavy-Duty Suspension Pin Set is a must-have for owners running the 9080-series Extreme Heavy Duty Upgrade Kit. Designed for maximum durability, these screw pins keep your upgraded suspension arms firmly in place during extreme bashing sessions. Key Features: Heavy-duty steel construction for maximum strength Includes multiple lengths for complete front and rear coverage Designed specifically for the 9080-series Extreme Heavy Duty Upgrade Kit Will not fit standard suspension components 📦 Includes: (4) 3x52mm Screw Pins (2) 3x32mm Screw Pins (2) 3x40mm Screw Pins Compatibility: For use only with the Traxxas 9080-series Extreme Heavy Duty Upgrade Kit

Read more less

Traxxas 3x25mm Round-Head Machine Screws (6) – Part 2569Long Reach. Rock-Solid Hold. The Traxxas 3x25mm round-head machine screws are ideal for applications that require extra length without sacrificing strength or fit. Perfect for securing larger components or layering through thicker mounts. ✅ Includes 6 round-head machine screws✅ Size: 3x25mm – longer length for deeper mounting points✅ Durable steel construction – built to last under stress✅ Compatible with standard 3mm thread applications✅ Fits many Traxxas 1/10 scale models 📦 Includes: (6) 3x25mm Round-Head Machine Screws Part #: 2569 💡 Pro Tip: Match with washers or spacers to create rock-solid mounting solutions for electronics, bumpers, and more.    

Read more less