⚙️ Quiet Strength. Precision-Engineered in the USA. The Avid RC Triad 72-Tooth Spur Gear delivers smooth, whisper-quiet performance and unbeatable strength — designed exclusively for the Avid Triad Slipper Clutch System. Each gear is made from Avid’s custom-blend, glass-free high-strength material, offering three times the impact resistance of Delrin while running noticeably quieter than traditional fiberglass-reinforced spurs. Perfectly balanced, true-spinning, and built to last — this is the gear serious racers trust. ⚡ Features: 🇺🇸 Made in the USA from Avid’s premium low-noise, high-strength composite (zero glass fibers) 🔇 Ultra-quiet operation with 3× the impact strength of Delrin 🌀 Precision 48-pitch tooth form ensures smooth, drag-free rolling 🎯 Center-point injection molded for perfect balance and true rotation — no wobble 🧩 Molded tooth count and setup indicators for easy identification and assembly 🔢 Marked with “1” and “2” for single- or dual-plate Triad clutch configuration 🧠 Designed exclusively for the Avid Triad Slipper Clutch System (Stock or Mod kits) 📏 Specifications: Pitch: 48P Tooth Count: 72T Compatibility: Avid Triad Slipper Clutch System Part Number: AV1020-72 Made in: USA 💡 Pro Tip:Use 72T for mid-range gearing — perfect balance between acceleration and top-end speed on most 1/10 2WD buggy and stadium-truck setups running a Triad slipper.  

Read more less

⚙️ Precision-Engineered Power. Made in the USA. The Avid RC Triad 69-Tooth Spur Gear is built exclusively for the Avid Triad Slipper Clutch System, delivering ultra-smooth, ultra-quiet performance with unmatched durability. Crafted from Avid’s custom-blend low-noise material, this gear eliminates the harsh sound of standard fiberglass spurs while offering three times the impact strength of Delrin — all in a perfectly balanced, true-spinning design. ⚡ Features: 🇺🇸 Made in the USA from a proprietary high-strength plastic — zero glass fibers for low noise and maximum toughness 🔇 Ultra-quiet operation with 3× the impact strength of Delrin 🌀 Precision 48-pitch tooth form provides smooth rolling and consistent mesh 🎯 Centerpoint injection-molded for perfect balance and true rotation 🧩 Number of teeth molded in for easy identification 🔢 Marked with “1” and “2” for single- or dual-plate Triad clutch setup compatibility 🧠 Designed exclusively for use with the Avid Triad Slipper Clutch System 📏 Specifications: Pitch: 48P Tooth Count: 69T Compatibility: Avid Triad Slipper Clutch System (Stock or Mod Kit) Part Number: AV1020-69 💡 Pro Tip:Keep a few different Triad spur sizes (66T–87T range) on hand so you can fine-tune your gearing for any track layout or motor setup.  

Read more less

🏁 Built to Win – Engineered for Precision The Avid Truss 2.2 Rear Buggy Wheels bring next-level design and performance to your 1/10 scale race setup. Every detail is optimized for durability, torque strength, and visual appeal — featuring Avid’s unique concave face and reinforced truss hex structure for maximum power transfer and style. Whether you’re running high-grip carpet or smooth clay, these lightweight wheels deliver consistent performance lap after lap. ⚡ Features: 💪 Truss reinforcement at the hex ensures maximum torque strength and stability through hard corners 🧱 Concave vertical face protects wheel nuts and axles while adding sleek visual depth 🌀 Six internal ribs minimize rotating mass and resist fatigue under heavy load 🧩 Low-profile inner bead ribs allow tire foams to flex naturally for better landings ✨ Textured glue bead and tapered outer face ensure clean, secure tire mounting 🔩 Reinforced wheel-nut area withstands aggressive serrated nuts 🌬️ Oversized 4mm vent holes provide smooth airflow—no drilling needed ⚙️ Standard 2.2" fitment for universal buggy tires 💡 Lightweight at just 17.5g per wheel to reduce rotating mass and improve acceleration 📦 Includes: (4) Avid Truss 2.2 Rear Wheels – White 📏 Specifications: Outer Diameter: 2.2” Hex Depth: 3.5mm (Standard Offset) Weight: 17.5g each Fitment: 1/10 2WD & 4WD Buggy Rear Part Number: AV1110 💡 Pro Tip:Pair these with Avid Truss 2.2 Front Slim Wheels (AV1112) for a complete, balanced wheel setup that looks as sharp as it performs.  

Read more less

🏁 Precision. Strength. Style. The Avid Truss 2.2 Buggy Front Slim Wheels set a new standard for performance and durability in 1/10 buggy racing. Designed for racers who demand precision and style, these wheels feature Avid’s signature concave truss face, optimized rib structure, and lightweight build for superior handling and torque strength. ⚡ Features: 🧱 Truss reinforcement at the hex delivers maximum torque strength and prevents flex under load 💥 Concave vertical face protects axles and wheel nuts from track impacts while giving a premium polished look 🌀 Six internal ribs reduce rotating mass and increase structural rigidity 🧩 Low-profile inner bead ribs let the foam absorb impact for smoother landings 🔩 Reinforced wheel-nut area withstands aggressive serrated nuts ✨ Textured glue bead for stronger tire bonds and cleaner mounting 🌬️ 2.5mm vent holes allow perfect airflow – no drilling needed ⚙️ Standard 2.2” fit for all 1/10 scale buggies 🎨 Available in White or Yellow 📦 Includes: (4) Avid Truss 2.2 Front Slim Wheels 📏 Specifications: Outer Diameter: 2.2” Hex Depth: 2.0mm (Standard Offset) Fitment: 1/10 2WD Buggy Front (Slim Tires) Part Number: AV1112 💡 Pro Tip:Pair these with Avid 2.2 Rear Buggy Wheels and your favorite clay or carpet tires for a perfectly balanced setup that shines on-track and in the pits.    

Read more less

Product Overview Designed to be color coordinated (e.g. Red uses all red wires and sheath) for charging 2S battery packs through 12ga wire. Includes gold-plated 4mm to 5mm bullets on the battery end to cover all battery types and a 4mm bullet on the charging end. Comes with the popular XH 3pin balance plug, which most trim one of the plastic alignment rails with an x-acto to plug right into the charger instead of the balance port. Or you can use the included XH 7pin if you don't want to brave that. Balance leads are 2.5" (63.5mm) longer than the charge leads so they can easily be plugged into any charger design. Specifications Color Coordinated (all wires and sheath colors match). 12ga soft silicone wire at 2 feet long (610mm). Gold-plated bullets, 4mm to 5mm on battery end and 4mm on charger end. Balance leads are 2.5" (63.5mm) longer than charging leads. Comes with XH 3pin balance plug installed and includes XH 7pin. Tips You can skip using a balance board or changing out to the 7 pin adapter with this simple modification.   

Read more less

Product Overview Designed to be color coordinated (e.g. Red uses all red wires and sheath) for charging 2S battery packs through 12ga wire. Includes an XT60 plug on the charger end and gold-plated 4mm to 5mm bullets on the battery end to cover all battery types. Comes with the popular XH 3pin balance plug, which most trim one of the plastic alignment rails with an x-acto to plug right into the charger instead of the balance port. Or you can use the included XH 7pin if you don't want to brave that. Balance leads are 2.5" (63.5mm) longer than the charge leads so they can easily be plugged into any charger design. Specifications Color Coordinated (all wires and sheath colors match). 12ga soft silicone wire at 2 feet long (610mm). XT60 plug on charger end. Gold-plated 4mm to 5mm bullets on battery end. Balance leads are 2.5" (63.5mm) longer than charging leads. Comes with XH 3pin balance plug installed and includes XH 7pin. Tips You can skip using a balance board or changing out to the 7 pin adapter with this simple modification.   

Read more less

Avid 7" High-Clearance Wing Set (Standard) – Uncut (2pcs) [AV10129-S] Product Overview: The Avid 7" High-Clearance / Low Drag Wing is meticulously engineered for 1/10 buggies requiring maximum airflow efficiency and structural integrity. Featuring high clearance wheel cutouts, smooth airflow shaping, and unmatched durability, this wing set is the perfect solution for racers demanding both performance and strength. This version includes two uncut wings in standard thickness, providing flexibility for trimming and custom fitment. Features: Set of two 7” uncut wings Standard thickness for maximum durability and longevity High-clearance wheel arches for improved tire clearance 18.5° low-drag rear angle relieves downforce pressure without compromising strength Small raised centerline mark for quick and precise centering during mounting Eight side support ribs for structural strength during impacts Embossed AVID logo at the center of each wing Includes gurney options to fine-tune rear traction (sold separately) Includes: (2) Avid 7" Uncut High-Clearance Wings (Standard Thickness) Part Number: AV10129-S

Read more less

Product Overview The Avid Ringer Wing Buttons are designed to have that extra pop of two silver highlights without sacrificing durability. Details 7075-T6 Aluminum anodized with two silver highlight areas for that extra pop. M3 flat head screw design to fit nearly every 8th and 10th vehicle on the market. Available colors: Black, Blue, Red, Pink, Orange, and Silver. Each package includes 2 Wing Mount Buttons.

Read more less

Avid Moon Style Aluminum HV High Speed Cooling Fan (30mm x 30mm) – Black w/Silver Chamfer High Voltage | High RPM | Lightweight Aluminum Housing Keep your electronics cool and stylish with the Avid Moon Style 30mm Cooling Fan. Designed for high-performance RC setups, this fan features a sleek anodized black aluminum case with silver chamfered edges and delivers powerful airflow at up to 28,000 RPM. Compatible with 5.0V to 8.4V systems. ⚙️ Features: 🌬️ 28,000 RPM Performance – Excellent cooling for ESCs and motors 🧊 Machined Aluminum Case – Durable and efficient heat dissipation ⚡ High Voltage Capable – Operates from 5.0V up to 8.4V 🖤 Anodized Black Finish – With sharp silver chamfer styling 🔧 30x30x10mm Size – Standard size for a variety of mounting applications 🙃 Pro Tip: Peel off the sticker for a cleaner look! 📦 Specifications: Operating Voltage: 5.0–8.4V RPM: 28,000 Current Draw @ 8.4V: 0.6A Dimensions: 30mm x 30mm x 10mm Case Material: Black anodized aluminum w/ silver chamfers Fan Blade Material: Plastic 🧩 A perfect mix of style, strength

Read more less

⚡ Lightweight Performance for Stock Racers – The Avid RC Triad Direct Drive eliminates the slipper assembly on your B7 for less rotating mass and zero slip (aside from the diff). At only 6.45g with a 72T spur (2.62g without spur), this is the lightest direct drive system on the market. ⚙️ Features:✅ Removes the entire clutch/slipper for reduced rotating mass✅ Lightest direct drive system available – just 6.45g w/ 72T spur✅ All-aluminum construction, including a custom M3x48 topshaft screw✅ Spur gear versatility – works with Avid Triad spur gears (spur not included)✅ Includes both 69T & 72T Triad spur gears✅ Clean install design with no loose screws to worry about 📦 Includes: (1) 69T Triad Spur Gear (1) 72T Triad Spur Gear (1) Direct Drive Aluminum Plate (1) M3x48 Aluminum Screw (1) Aluminum Hat Bushing (1) Aluminum Cone Washer (1) M3 Ringer Aluminum Nut 🔧 Compatibility: Team Associated B7 (installation same as B6.1 Triad Direct Drive) 💡 Pro Tip: Direct drive setups aren’t for everyone — but on stock classes and high-grip tracks, removing the slipper can give you a noticeable edge in efficiency and throttle response.  

Read more less

Avid B7 Hardened Front Inner Hinge Pins (3x34mm) – 2pcs [AV10143-34] Product Overview: The Avid 3x34mm Hardened Front Inner Hinge Pins are a precision upgrade for the Team Associated B7. Crafted from high-strength hardened steel, these pins are a direct replacement for the front inner location — offering enhanced durability where it counts. Whether you're replacing worn pins or want to avoid buying the full hinge pin set (ASC92496), these are your go-to solution. Features: (2) 3x34mm hardened steel hinge pins for the B7 front inner location Built to withstand extreme racing conditions Direct replacement for pins in ASC92496 – no need to purchase the entire kit Includes: (2) 3x34mm Hardened Front Inner Hinge Pins Part Number: AV10143-34

Read more less

🔌 Simple, Reliable Charging – The Avid RC Receiver Charge Lead makes charging your receiver packs easy with 4mm bullets to a female Futaba plug. Built with quality 20awg wire and wrapped in a sleek black nylon sleeve, it’s a durable and dependable pit essential. ⚙️ Specifications:✅ 4mm bullets to female Futaba plug✅ 20awg wire for efficient charging✅ 13.8in (350mm) length for flexibility and convenience✅ Black nylon sleeve for protection and clean look 📦 Includes: (1) Receiver Charge Lead – 4mm Bullet to Female Futaba 💡 Pro Tip: Always inspect your charge leads before race day — a clean, solid connection ensures safe charging and prevents false peak issues.  

Read more less

Avid Slip Bearing Oil | High-Performance Teflon-Based Lubricant [AV10134] Product Overview: Slip into unmatched performance with Avid Slip Bearing Oil—now with a light blue tint! This ultra-premium Teflon-based oil is engineered to drastically reduce metal-on-metal friction, extend bearing life, and protect against rust and dirt. Put through rigorous third-party testing, Slip Bearing Oil has proven to outperform typical light oils with ease. The convenient oiler pen features a 1" steel precision tip, perfect for quick access to clutch or wheel bearings. Each pen contains 1/4oz (7.4cc) of high-efficiency lubricant—enough for over a year of racing use! Features: Teflon-based formula for extreme anti-friction performance Light blue tint for easy visual reference Reduces wear, repels dirt, and displaces moisture Ideal for clutch and wheel bearings Convenient oiler pen with 1" steel tip and protective cap 1/4oz (7.4cc) of oil lasts through countless applications Pro Tip:For clutch bearings, blow out factory grease before initial use. After each clutch inspection, wipe bearing clean and reapply 1 drop of Slip Bearing Oil for maximum life and performance. Includes:  • (1) Avid Slip Bearing Oil Pen

Read more less

Avid Oiler Pen | Empty [AV10135] Product Overview: The Avid Empty Oiler Pen gives you full control over your lubrication needs. Originally used for Avid Slip oil, this handy tool now comes empty—ready to be filled with your favorite lubricant. It features a precision 1" (25.4mm) long steel tip for clean and accurate application and holds up to 1/4oz (7.4cc) of fluid. A perfect companion for any RC tool kit or pit box. Features: Comes empty – fill with your preferred lubricant Precision 1" steel tip for controlled application Holds up to 1/4oz (7.4cc) of fluid Compact, pit-friendly size Includes: (1) Empty Avid Oiler Pen Part Number: AV-OIL-PEN

Read more less