Heavy-duty charge lead for Junsi iCharger 456DUO and other XT90-input chargers Overview:The ProTek RC 2S High Current Charge/Balance Adapter is built for racers who demand maximum efficiency and reliability when charging at high amperage. Designed specifically for Junsi iCharger 456DUO users—and ideal for any charger using XT90 inputs—this cable delivers ultra-low resistance and premium performance for modern high-power LiPo packs. About the High Current Charge/Balance Adapter Built for Serious Power HandlingThis adapter features gold-plated 5 mm bullets for secure, low-loss battery connection and a female XT90 connector for the charger side, ensuring stable current transfer even during extreme charge or discharge cycles. The 10 AWG high-strand wire provides the heavy-duty conductivity needed for charging at higher-than-average amp rates without voltage drop or excess heat. Clean, Tangle-Free DesignThe 24-inch coiled jacket keeps your pit area organized and the cable flexible, while reducing tangling during setup or transport. A 7-pin XH balance connector provides easy balancing for 2S and higher cell count packs—making this a truly versatile, professional-grade charging lead. Features: Designed for Junsi iCharger 456DUO and other XT90-input chargers 5 mm gold-plated bullets for secure battery connection 10 AWG high-strand wire handles extreme current demands Female XT90 connector ensures solid charger connection 7-pin XH balance plug supports up to 6S balancing 24" (61 cm) coiled jacket for flexibility and a tangle-free workspace Low resistance design for maximum charge performance Specifications: Specification Details Wire Gauge 10 AWG Length 24" (61 cm) Charger Connector Female XT90 Battery Connector 5 mm Gold-Plated Bullets Balance Connector 7-Pin XH (Up to 6S) Compatibility Junsi iCharger 456DUO / 458DUO, XT90-input chargers Includes: (1) 2S High Current Charge/Balance Adapter Cable

Read more less

Compatible with iCharger 456DUO, 458DUO, and iSDT Chargers Overview:The TQ Wire XT90 2S Charge Cable is built to handle high-power charging applications with maximum efficiency and reliability. Designed specifically for use with Junsi iCharger 456DUO and 458DUO, this premium cable provides a secure connection between your charger and LiPo batteries equipped with 4mm or 5mm bullet connectors. About the XT90 2S Charge Cable Heavy-Duty Design for High Power ChargingFeaturing an XT90 connector for the charger side and stepped 4mm/5mm bullets for the battery side, this cable is ideal for high-current setups where performance and safety are critical. The stepped bullet design ensures wide compatibility with various LiPo battery packs while maintaining a tight, low-resistance connection. Built from 12-gauge high-strand wire, the cable provides excellent current flow and flexibility. The length of 2 feet (610mm) offers convenience for bench setups without cluttering your workspace. Wrapped in durable black nylon mesh, it’s both tough and clean-looking—ready for the pits or workshop. Features: XT90 connector for secure charger connection 4mm & 5mm stepped bullets for wide battery compatibility Designed for Junsi iCharger 456DUO and 458DUO 12 AWG high-strand wire for maximum current efficiency 2-foot length for optimal reach and organization Durable black nylon mesh wrap for protection and aesthetics Plug-and-play reliability for professional or hobby use Specifications: Specification Details Length 2 feet (610mm) Wire Gauge 12 AWG Charger Connector XT90 Battery Connectors 4mm & 5mm Stepped Bullets Compatibility iCharger 456DUO, 458DUO, iSDT, and XT90-equipped chargers Includes: (1) XT90 2S Charge Cable with 4mm & 5mm Bullet Connectors

Read more less

Upgrade your buggy’s performance with the Team Associated RC10B84 Factory Team Carbon Chassis Brace Set. Designed for the RC10B84 1/10 4WD Off-Road Electric Buggy Kit, this optional Factory Team upgrade delivers increased chassis rigidity without adding unnecessary weight. ✅ Rigid & Lightweight – Carbon construction improves stiffness while keeping weight low✅ Enhanced Handling – Added rigidity boosts steering response and overall control✅ Factory Team Quality – Precision-engineered to fit seamlessly✅ Easy Installation – A practical upgrade for serious racers Includes: (1) RC10B84 Factory Team Carbon Chassis Brace Set Compatibility: Team Associated RC10B84  

Read more less

Upgrade the drivetrain of your XRAY XB4 2024/2025 with the Exalt Hybrid-XSN Ceramic Bearing Kit. Featuring a precision-engineered hybrid design, these bearings pair Silicon Nitride ceramic balls with stainless steel inner/outer rings for smoother operation, higher speed, and greater impact resistance than traditional full steel or full ceramic bearings. Pre-lubricated with Exalt Oil Slick Hi-Speed PTFE Bearing Oil, this kit provides out-of-the-box performance that’s built for the demands of racing. 🔥 Key Features: Designed for the XRAY XB4 2024 & 2025 1/10 4WD Buggy Hybrid design: Silicon Nitride ceramic balls + stainless steel rings Faster and smoother than all-steel bearings More impact-resistant than full ceramic bearings Lightly lubricated with Exalt Oil Slick Hi-Speed PTFE Bearing Oil (EXA9314) Serviceable: clean with citrus cleaner or acetone, re-lube as needed Built for maximum performance in both spec and modified racing ✅ Compatibility: XRAY XB4 2024 XRAY XB4 2025 📦 Includes: (16) Hybrid-XSN Ceramic Bearings (complete kit for XB4 2024/2025) ⚠️ Tip:Check your bearings before each race day and re-oil as needed to ensure peak drivetrain efficiency and extended bearing life.  

Read more less

Boost drivetrain efficiency and durability with the Exalt Hybrid-XSN Ceramic Bearing Kit for the Team Associated B74.2. Featuring Silicon Nitride ceramic balls paired with stainless steel inner/outer rings, these bearings deliver smoother, faster performance than steel bearings while being more impact-resistant than full ceramic designs. Each kit comes lightly lubricated with Exalt Oil Slick Hi-Speed PTFE Bearing Oil for ready-to-race performance. 🔥 Key Features: Engineered for the Team Associated B74.2 1/10 4WD Buggy Hybrid design: Silicon Nitride ceramic balls + stainless steel rings Faster, smoother operation than steel bearings More durable under impact than full ceramic bearings Pre-lubed with Exalt Oil Slick Hi-Speed PTFE Bearing Oil (EXA9314) Serviceable design — clean with citrus cleaner or acetone, re-oil as needed Built for maximum performance in spec and modified racing ✅ Compatibility: Team Associated RC10B74.2 1/10 4WD Buggy 📦 Includes: (18) Hybrid-XSN Ceramic Bearings (complete kit for B74.2) ⚠️ Tip:Inspect bearings before each race — re-oil as needed for peak speed, smoothness, and longevity.  

Read more less

Fine-tune your drivetrain or suspension with precision using these Team Associated 5.1x8.0x0.20mm shims. Whether you're adjusting spacing, reducing play, or dialing in alignment, these thin profile shims provide the subtle tweaks that matter in competitive setups. 📏 Specifications: Inner Diameter: 5.1mm Outer Diameter: 8.0mm Thickness: 0.20mm Material: Steel Quantity: (Check product packaging—typically sold in packs) 🛠️ Common Uses: Differential spacing Suspension tuning Slop removal on pivot points or shafts ✅ Compatibility: RC10B74 series Universal use for other 5mm shaft applications Essential for racers looking for ultra-fine tuning adjustments. Keep these handy in your pit box!

Read more less

Upgrade or refresh your drivetrain with the RC10B74 Center Differential Set from Team Associated. This high-performance center diff helps balance power delivery between the front and rear, improving cornering, acceleration, and control—especially in high-traction or uneven conditions. 🔧 Key Features: Genuine Factory Team differential assembly Smooth and consistent power transfer Essential for tuning your RC10B74 for various track conditions Helps reduce drivetrain stress under heavy loads 📦 Includes: (1) Complete Center Differential Set(May include gears, outdrives, diff case, internal hardware — verify in manual) ✅ Compatibility: Team Associated RC10B74 Also fits other RC10B74 variants (check your manual for exact fitment) Keep your buggy driving like new with this premium center diff set, built to deliver the precision and durability Team Associated is known for.

Read more less

Upgrade or replace your servo mounting solution with the Team Associated RC10B74.1 Servo Mount. Precision-machined and built to secure your steering servo in place, this factory replacement part ensures solid, reliable performance lap after lap. 📌 Key Features: Direct replacement for the stock servo mount Compatible with RC10B74.1 chassis layout Ensures secure, vibration-free servo positioning Factory Team durability and fitment ✅ Compatibility: RC10B74.1 May also be compatible with other RC10B74-series vehicles depending on configuration This part is essential for maintaining proper steering geometry and performance under race conditions. Keep your servo locked in and dialed.

Read more less

Give your RC10B74.1 the perfect balance of flex and rigidity with the Factory Team Flex Chassis Brace Support Set. Crafted from 2.0mm carbon fiber, this brace set is optimized to allow controlled flex in the chassis for enhanced traction and handling on a variety of track conditions. 📌 Key Features: Factory Team carbon fiber construction 2.0mm thickness provides the ideal flex characteristics Designed to tune chassis response for high-traction or bumpy tracks Lightweight and durable for competitive performance 📦 Includes: (1) Front Flex Chassis Brace Support (1) Rear Flex Chassis Brace Support ✅ Compatibility: RC10B74.1 May also be used on other B74 models with compatible geometry For racers looking to fine-tune handling without sacrificing durability, this Factory Team upgrade is a must-have.

Read more less

Upgrade your RC10B74.1 with the Factory Team Carbon Fiber Chassis Brace Support Set. Precision-cut from 2.0mm carbon fiber, this lightweight and rigid brace support enhances chassis stiffness and tuning capabilities—ideal for racers looking to fine-tune flex characteristics for maximum track performance. 📌 Key Features: Precision CNC-machined carbon fiber construction 2.0mm thick for optimized strength-to-weight ratio Reduces chassis flex for more consistent handling Essential for high-traction racing surfaces 📦 Includes: (1) Front chassis brace support (1) Rear chassis brace support ✅ Compatibility: RC10B74.1 May be used on other B74 variants with matching geometry Built for performance-minded racers chasing precision and durability.

Read more less

Upgrade your RC10B74 series buggy with these Factory Team Carbon Fiber Chassis Braces. Designed for increased stiffness and responsiveness, these lightweight carbon braces enhance durability while delivering consistent performance on high-traction surfaces. 📌 Key Features: Lightweight 2.5mm carbon fiber construction Increases chassis stiffness and rigidity Enhances overall handling precision Direct Factory Team upgrade for stock braces 📦 Includes: (1) Front carbon chassis brace (1) Rear carbon chassis brace ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2 RC10B74.2D A must-have hop-up for serious racers seeking that perfect balance of strength and responsiveness.

Read more less

Upgrade your RC10B74.2 with the Factory Team Top Plate Kit, engineered for improved front-end strength and rigidity. This precision CNC-machined kit enhances durability while maintaining a lightweight design — perfect for serious racers looking to increase performance and chassis tuning options. 📌 Key Features: Factory Team precision fit and finish Provides increased stiffness to the front chassis area Reduces flex in high-load conditions Lightweight, durable construction 📦 Includes: (1) Factory Team top plate (1) Top plate brace Required mounting hardware ✅ Compatibility: RC10B74.2 RC10B74.2D Optimize your front-end stability and keep your steering precise with this must-have tuning upgrade from Team Associated!

Read more less

Upgrade your RC10B74.1 with this Factory Team LTC (Low Torque Capacity) Differential Set, designed to reduce rotational mass and improve acceleration and handling. This set includes both the front and rear differentials, offering a complete solution for racers seeking increased efficiency and improved cornering response. 📌 Key Features: Complete front and rear differential set Lightweight LTC design for reduced rotating mass Enhanced on-power steering and corner exit traction Factory Team components ensure a precise fit and long-term durability 📦 Includes: (2) LTC gear differential assemblies (front & rear) Internal gears and seals pre-installed Ready to fill with your preferred silicone diff fluid ✅ Compatibility: RC10B74.1 RC10B74.1D May also be used with RC10B74.2 platforms as a tuning option

Read more less

Boost chassis rigidity and improve handling response with the Factory Team 2.5mm Carbon Fiber Stiff Chassis Brace Support Set for the RC10B74.2. This upgrade provides enhanced stiffness across the center section of the buggy, helping to reduce unwanted flex and improve overall consistency, especially on high-grip tracks. 📌 Key Features: Precision-machined 2.5mm carbon fiber construction Stiffens chassis flex in key areas Lightweight with high-strength performance Ideal for high-traction surfaces or aggressive driving styles 📦 Includes: (1) Carbon fiber front brace support (1) Carbon fiber rear brace support ✅ Compatibility: Team Associated RC10B74.2 and B74.2D Factory Team tuned fit and finish

Read more less

Upgrade your RC10B74.2 with the Factory Team Decoupled Slipper Shaft Outdrive Set. Designed for use with the decoupled slipper system, this precision-engineered outdrive set provides improved drivetrain durability and smooth power delivery, making it essential for high-level competition and maintenance. 📌 Key Features: Factory Team performance-grade components Designed for decoupled slipper configuration Enhances drivetrain strength and efficiency Precision-machined for accurate fit and finish 📦 Includes: (1) Pair of shaft outdrives (left & right) Hardware required for installation ✅ Compatibility: RC10B74.2 Works in conjunction with the Factory Team decoupled slipper system

Read more less

Optimize your drivetrain performance with the Factory Team Decoupled Slipper Hub and Pads for the RC10B74.2. Designed to work with the decoupled slipper system, this upgrade reduces front wheel influence during off-power cornering and braking, providing smoother handling and increased mid-corner stability on high-grip tracks. 📌 Key Features: Factory Team precision upgrade Designed for use with decoupled slipper setups Reduces braking drag and improves off-power steering Helps maintain consistent rear traction High-quality slipper pads included 📦 Includes: (1) Decoupled Slipper Hub (2) Slipper Pads ✅ Compatibility: Team Associated RC10B74.2 May also fit other RC10B74 variants using a decoupled slipper configuration

Read more less

Upgrade your RC10B74.2 with this official Team Associated Servo Mount Set, specifically designed for use with the decoupled slipper configuration. Precision-engineered for perfect fit and performance, this set ensures secure servo mounting and consistent servo alignment during extreme track action. 🔩 Key Features: Designed for RC10B74.2 vehicles Compatible with decoupled slipper setups Factory Team precision fit and finish Includes both left and right servo mounts 📦 Includes: (1) Left Servo Mount (1) Right Servo Mount ✅ Compatibility: Team Associated RC10B74.2 Vehicles using the decoupled slipper layout

Read more less

Overview:Upgrade your buggy with the Team Associated RC10B84 Factory Team Carbon Side Rails. Made from high-quality carbon fiber, these side rails reduce weight and add rigidity compared to the standard composite rails. The result is a stiffer chassis with improved response, perfect for racers looking to maximize performance on high-traction tracks. Features: Carbon fiber construction for lightweight strength Adds rigidity to the chassis for sharper handling Reduces overall vehicle weight Direct replacement for stock composite side rails Genuine Factory Team performance upgrade Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Set of Factory Team Carbon Side Rails Part Number: 92502 ⚡ Pro Tip: Pair these with the Factory Team Carbon Chassis Braces (92504) for a fully optimized lightweight and rigid chassis setup.

Read more less

Overview:Reinforce your buggy’s backbone with the Team Associated RC10B84 Chassis Braces. Designed to stiffen the chassis and improve durability, these braces help maintain consistent handling by reducing flex under high loads. Whether you’re replacing worn parts or fine-tuning chassis stiffness, this set ensures your B84 stays reliable and race-ready. Features: Complete chassis brace set for the B84 Provides added rigidity and durability Helps maintain consistent handling and driveline alignment Molded composite construction for strength with balanced flex Genuine Team Associated replacement part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Chassis Brace Set (front and rear braces with hardware) Part Number: 92503 ⚡ Pro Tip: Upgrade to the Factory Team Carbon Chassis Braces (92504) for reduced weight and even greater stiffness if you’re racing on high-traction tracks.

Read more less

Overview:Keep your electronics secure and cool with the Team Associated RC10B84 Battery Holder & Fan Mount Set. Designed for the RC10B84, this set provides a lightweight, durable solution to lock your battery firmly in place while also offering a dedicated mount for a cooling fan. Perfect for racers pushing their buggy to the limit, it ensures both stability and reliable cooling during long runs or high-traction racing. Features: Secure, lightweight battery holder designed for the B84 chassis Integrated fan mount to keep electronics running cool Durable construction with precision fit Direct replacement or upgrade for easy installation Genuine Team Associated factory part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Battery Holder (1) Fan Mount Required mounting hardware Part Number: 92505 ⚡ Pro Tip: Pair this set with a 30mm or 40mm high-RPM fan for maximum cooling efficiency during long mains or hot outdoor racing conditions.

Read more less

Overview:Dial in your drivetrain with the Team Associated RC10B84 Differential Height Inserts. These precision-molded inserts allow you to easily adjust the height of the differentials in your B84, fine-tuning traction, handling balance, and driveshaft angles for any track condition. A critical tuning option for racers looking to maximize consistency and performance. Features: Precision-molded inserts for differential height adjustment Fine-tunes traction and balance by changing driveshaft angles Quick and easy to install or swap at the track Durable and lightweight construction Genuine Team Associated tuning accessory Compatibility: Team Associated RC10B84 1/10 4WD Buggy (front and rear differentials) Includes: (1) Set of Differential Height Inserts (various heights) Part Number: 92513 ⚡ Pro Tip: Use a lower diff height for improved stability and traction on bumpy or low-grip tracks, and a higher diff height for increased corner speed and sharper handling on high-grip surfaces.  

Read more less

Overview:Boost performance and durability with the Team Associated RC10B84 Factory Team Carbon Front Suspension Arms. Constructed from carbon composite material, these arms provide increased stiffness and reduced flex compared to standard arms—delivering sharper steering response, improved cornering consistency, and the durability needed for high-level racing. Features: Carbon composite construction for added stiffness and strength Reduces flex for more consistent suspension geometry Improves steering precision and cornering stability Lightweight design helps lower overall vehicle weight Genuine Factory Team upgrade part Compatibility: Team Associated RC10B84 1/10 4WD Buggy (Front suspension) Includes: (1) Set of Carbon Front Suspension Arms Part Number: 92515 ⚡ Pro Tip: Pair these with the Factory Team carbon rear arms (92516) for a fully upgraded suspension setup that maximizes handling precision on high-traction tracks.  

Read more less

Overview:Fine-tune your buggy’s steering geometry with the Team Associated RC10B84 Caster Inserts. These precision-molded inserts allow racers to adjust caster angle quickly and easily, giving you the flexibility to dial in steering response and stability for any track condition. A must-have tuning option for serious B84 racers. Features: Precision-molded caster adjustment inserts Allows quick and accurate caster angle changes Improves steering response and stability based on track surface Lightweight and durable construction Genuine Team Associated tuning part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Set of Caster Inserts (various angles) Part Number: 92522 ⚡ Pro Tip: Use less caster (lower angle) for quicker steering response on high-traction tracks, and more caster (higher angle) for improved straight-line stability on rough or low-traction surfaces.

Read more less

Overview:The Team Associated RC10B84 Arm Mount D is a precision-machined suspension mount designed for the rear end of the B84. Built to deliver strength and accuracy, this mount ensures the suspension arms stay properly aligned under extreme racing conditions. Whether you’re replacing a worn part or fine-tuning your setup, the Arm Mount D provides a reliable foundation for consistent handling and durability. Features: CNC-machined for precise hinge pin alignment Adds strength and rigidity to the rear suspension assembly Durable construction for long-lasting performance Genuine Team Associated factory replacement/upgrade part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Arm Mount D Part Number: 92540 ⚡ Pro Tip: Pair the Arm Mount D with the Arm Mount Backing Plate (92541) for maximum suspension durability and consistent geometry under heavy loads.

Read more less

Overview:The Team Associated RC10B84 Arm Mount Backing Plate is a precision-machined component designed to reinforce the suspension arm mounts on your buggy. By adding strength and stability to the rear suspension assembly, this backing plate helps maintain precise alignment under high loads, ensuring consistent handling and durability during hard racing conditions. Features: Strengthens and supports the suspension arm mount assembly Maintains proper alignment under heavy loads and impacts Machined for a perfect fit with the RC10B84 chassis Genuine Team Associated Factory Team part for race-proven reliability Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Arm Mount Backing Plate Part Number: 92541 ⚡ Pro Tip: Use this backing plate with the B84 aluminum arm mounts for maximum suspension rigidity and improved cornering consistency.

Read more less

Upgrade your shocks with the XRAY Aluminum Shock Cap Nuts. Machined from premium Swiss 7075 T6 aluminum, these cap nuts include a precision vent hole that allows trapped air to escape during assembly for smoother and more consistent shock performance. Features: CNC-machined from high-quality Swiss 7075 T6 aluminum Integrated vent hole for bubble-free shock bleeding Designed for Big Bore shocks Hard-anodized finish for long-lasting durability Lightweight design without sacrificing strength Includes: (2) Aluminum Shock Cap Nuts with Vent Hole Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) XRAY XB4 (4WD Buggy) Other XRAY models equipped with Big Bore shocks (check manual)

Read more less

Upgrade your suspension durability with the XRAY Hardened Shock Shaft (45mm). Made from premium steel and precision-ground for smooth movement, these shafts provide maximum strength, wear resistance, and long-lasting performance. Designed for big-bore shocks, they deliver consistent performance even in the harshest racing conditions. Features: Set of 2 hardened 45mm shock shafts Precision-ground for ultra-smooth shock operation Extreme durability for high-stress racing conditions Direct XRAY factory replacement part Compatibility: XB2 1/10 2WD Buggy (Front/Rear depending on setup) XT2 1/10 Stadium Truck Other XRAY big-bore shock-equipped platforms (check manual for placement) Part Number: 368263

Read more less

Upgrade your suspension with the XRAY Front Hardened Shock Shafts. At 42mm length, these precision-ground shafts are engineered from hardened steel for maximum strength and wear resistance. Perfect for maintaining smooth shock action under the toughest racing conditions. Features: Precision-ground hardened steel shafts for durability 42mm length – direct replacement fit Provides smooth suspension travel and consistent damping Designed for use in high-performance racing applications Includes: (2) Front 42mm Hardened Shock Shafts Compatibility: XRAY XB2 (all variants) XRAY XT2 Stadium Truck May fit other XRAY models using big bore 42mm front shocks (check your manual for confirmation)

Read more less

Dial in your suspension with the XRAY Delrin Shock Piston Set. Made from precision-molded Delrin® for smooth, consistent damping, this complete big bore set gives you every piston option you need to fine-tune handling for any track condition. Features: Includes a complete range of pistons for big bore shocks High-quality Delrin® construction for smooth shock action Provides tuning flexibility for different track surfaces & grip levels Designed for precise fit and long-lasting performance Includes: Full piston assortment for XRAY big bore shocks Compatibility: Fits XRAY vehicles equipped with big bore shock systems

Read more less

Upgrade your drivetrain with the XRAY Composite Adjustment Ball-Bearing Hubs. Engineered for precision and durability, these hubs provide smoother rotation, reduced friction, and consistent performance under high-stress racing conditions. Features: Strong composite construction for lightweight durability Precision ball-bearing design for smoother drivetrain performance Helps reduce slop and improve efficiency Easy installation and long-lasting reliability Includes: (2) Composite Adjustment Ball-Bearing Hubs Compatibility: Fits XRAY XB2 / XT2 / XB4 platforms (check manual for specific fitment)

Read more less

Upgrade your steering precision with the XRAY Composite Servo Shim Set. Designed to perfectly space and align your servo, these durable composite shims help reduce stress on linkages and ensure smooth, consistent steering response. Features: Set includes 4 composite servo shims Provides proper servo height and alignment Reduces wear on steering components Lightweight yet durable composite material Easy direct installation Compatibility: Fits all XRAY 1/10 and 1/8 platforms where servo spacing adjustments are required  

Read more less

The XRAY Differential Gasket Set is a must-have replacement pack for maintaining smooth, leak-free differential performance. Made from precision-cut, high-quality material, these gaskets create a perfect seal to keep diff oil where it belongs and extend the life of your drivetrain. Features: Precision fit to ensure consistent diff sealing High-quality material resists wear and compression Maintains smooth, reliable differential action Essential for regular maintenance and rebuilds Includes:(4) Differential Gaskets Compatibility: Fits XRAY differentials across multiple platforms (commonly used in XB2, XB4, XT4, and related models)

Read more less

The XRAY SLS Slipper Clutch Pads are designed for racers who demand consistent performance and smooth power delivery. Made from XRAY’s special SLS (Super Light Slipper) material, these pads offer improved wear resistance, stable slip characteristics, and better heat tolerance for long runs. Whether you’re running on carpet, turf, or dirt, they ensure precise traction control and dependable durability. Features: High-performance SLS (Super Light Slipper) material Provides smooth and consistent slip characteristics Increased durability and wear resistance Designed for stable performance under high heat loads Perfect upgrade or replacement pads for your slipper clutch Includes:(2) SLS Slipper Clutch Pads Compatibility: XRAY XB4 (2021 onwards) XRAY XT4 (2022 onwards)

Read more less

The XRAY Solid Axle Set is the ultimate upgrade for racers looking to maximize acceleration and efficiency on high-traction surfaces. Replacing the center differential, this solid axle delivers instant throttle response with zero power loss — perfect for carpet and turf racing where consistency and punch are key. Built from premium XRAY materials and engineered with precision, this set is lightweight, durable, and designed for winning performance. Features: Solid axle design replaces the center differential for maximum efficiency Provides instant throttle response and direct power transfer Ideal for high-traction carpet and turf conditions Lightweight construction reduces rotating mass Precision-machined for durability and smooth operation Includes:(1) Complete Solid Axle Set Compatibility: XRAY XB4 (2021 onwards) XRAY XT4 (2022 onwards)

Read more less

The XRAY XB4 Carpet One-Way Slipper Clutch Set is a precision-engineered upgrade designed specifically for high-traction carpet tracks. By eliminating the standard slipper effect under braking, this one-way system transfers full braking force directly to the front wheels, giving you sharper corner entry, increased steering response, and faster lap times on carpet. Built from premium materials with XRAY’s renowned attention to detail, this set ensures smooth power transfer and consistent performance race after race. Features: One-way slipper clutch design for sharper braking and corner entry Ideal for high-traction carpet track racing CNC-machined components for precision and durability Direct fit with the XB4 platform Lightweight design reduces rotating mass Includes:(1) Carpet One-Way Slipper Clutch Set Compatibility: XRAY XB4 2021 Compatible with later XB4 models that support the 2021 slipper design

Read more less

The XRAY Rear Wing Posts are precision-molded composite replacements designed to securely mount the rear wing on your XB4 buggy. Made from a high-strength composite material, these posts deliver durability while keeping weight to a minimum. Perfect as a direct replacement or spare set to keep in your pit box. Features: Lightweight, high-strength composite construction Securely mounts the rear wing for consistent performance Precision-molded for perfect fit and alignment Direct factory replacement part Includes:(2) Rear Wing Posts Compatibility: XRAY XB4 (all versions, including 2025) May fit additional XRAY models using the same rear wing mount system

Read more less