Concepts S15 Body for XRAY XB4 2024 – Includes Carpet, Turf, and Dirt Wings🏁 IFMAR-Winning Heritage, Built for the XB4 The JConcepts S15 Clear Body for the XRAY XB4 2024 delivers cutting-edge performance born from world championship success. Inspired by the IFMAR-winning legacy and refined for today’s high-competition 1/10 4WD platforms, the S15 features a tightly molded profile, mid-body winglets, and aggressive aerodynamic shaping to maximize handling, downforce, and control. With a sculpted, single cockpit cab, the S15 provides smoother cornering and stability through high-speed sections while enhancing airflow with its finned roofline. Raised sidepod contours and a climbing rear spoiler help boost rear grip and balance, while the included 6.5" Carpet | Turf | Dirt wings give racers flexible tuning options to match track conditions. 💡 Whether you're battling on turf, carpet, or high-bite dirt, the S15 shell helps you stay composed, fast, and in control. ✨ Key Features: Championship-proven S15 styling with aggressive cab design Fits XRAY XB4 2024 perfectly with minimal gaps Raised rear spoiler increases rear downforce and traction Sidepod winglets improve mid-body force balance Integrated roof fin enhances tracking and straight-line stability Includes (2) 6.5" rear wings – one each for Carpet, Turf, and Dirt Clear heavy-duty polycarbonate with overspray film Includes JConcepts decal sheet and window masks 📦 Includes: (1) Clear S15 Body for XRAY XB4 2024 (2) 6.5" Rear Wings (Carpet/Turf/Dirt) (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Product ships clear and uncut. Painted body shown for illustration only. Compatibility: XRAY XB4 2024

Read more less

JConcepts F2 Standard Body for XRAY XB4 2024 – Includes Two 6.5" Wings🏁 Championship Aero Performance for Modern 4WD Racing The JConcepts F2 Standard Body for the XRAY XB4 2024 delivers a proven aerodynamic profile built for serious performance on dirt, carpet, and turf. Born from the IFMAR World Championship-winning design, this F2 body features a forward cab bias, louvered roof, and Finnisher “V” side-pod shaping — all blended for unmatched steering response and high-speed stability. Designed to hug the XRAY XB4 2024 chassis with precision, this body maintains a tight profile while allowing room for varied battery positioning, motor clearance, and front bulkhead geometry. The double-step side-pods, extended rear mounting ledge, and chamfered contours provide a clean fit with standout style. ✨ Key Features: Direct fit for XRAY XB4 2024 Clear polycarbonate in standard thickness Forward cab bias for aggressive steering and balance Louvered roof and rear windows improve cooling and rigidity Finnisher-style side-pod and roof contouring for unique aero feel Built-in room for electronics and drivetrain layout Includes (2) 6.5" Carpet | Turf | Dirt Wings Window masks and JConcepts decal sheet included 📦 Includes: (1) Clear Standard Weight F2 Body for XRAY XB4 2024 (2) 6.5" Wings (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Product ships clear and uncut. Painted body shown for illustration only. Compatibility: • • XRAY XB4 2024

Read more less

Hub Set Overview:The Team Losi Racing 22X-4 Aluminum VHA Hub Set is an optional upgrade designed to improve durability and consistency in your suspension setup. Precision-machined from aluminum, these hubs provide a more rigid and reliable connection. 🔧 Key Features ✔ Machined aluminum construction✔ Increased strength and durability✔ Improves suspension consistency✔ Black anodized finish with chamfered edges✔ Direct fit upgrade 📦 Includes (1) Aluminum VHA Hub Set 🚗 Compatibility Team Losi Racing 22X-4 A durable upgrade that adds strength and a premium look, these aluminum hubs help maintain consistent performance on the track.  

Read more less

Bulkhead Overview:The Team Losi Racing 22X-4 Aluminum Center Bulkhead is an optional upgrade designed to add strength and rigidity to the center section of your chassis. Precision-machined from aluminum, it helps improve durability and overall chassis consistency. 🔧 Key Features ✔ Machined aluminum construction✔ Increases chassis strength and rigidity✔ Black anodized finish with chamfered edges✔ Clean, professional appearance✔ Direct fit upgrade 📦 Includes (1) Aluminum Center Bulkhead 🚗 Compatibility Team Losi Racing 22X-4 A durable upgrade that adds strength and a premium look, this aluminum bulkhead helps keep your 22X-4 chassis performing consistently under demanding conditions.  

Read more less

The Team Losi Racing 22X-4 Wing Mount & Washers set is a genuine replacement designed for the TLR 22X-4 Race Kit. This assembly securely mounts the rear wing to the buggy, helping maintain stability and aerodynamic performance during racing. Perfect for replacing worn or damaged parts, this set restores the proper wing support needed for consistent handling and performance on the track. 🏁 Features Genuine Team Losi Racing replacement part Securely mounts the rear wing to the chassis Durable construction for racing conditions Maintains proper wing positioning and stability Direct factory replacement for quick installation 📦 Includes Wing Mount Mounting Washers 🔧 Compatibility Team Losi Racing 22X-4 Race Kit Keep your buggy’s aero setup secure and race-ready with this factory replacement wing mount set.  

Read more less

Upgrade your TLR 22X-4 2.0 with premium strength, precision tuning, and unmistakable style. The Avid Ringer Titanium Turnbuckle Set brings billet titanium durability together with Avid’s signature Ringer design for a setup that performs as good as it looks. 💎 Titanium Strength. Race-Ready Precision. Machined from billet 6Al-4V Titanium with cold-rolled threads, these 3.5mm turnbuckles are built for serious racers who demand strength without excess weight. After a full year of testing, Avid reports zero failures — and they back them with their well-known replacement guarantee. 🔄 Built-In Directional Adjustment No more guessing trackside. Each turnbuckle features: Machined A-Arrow direction indicators (turn arrow forward to tighten) Logo engraved on all four sides (won’t wear off) Oversized 4mm adjustment center for easy wrench access Clean. Functional. Built to last. ✨ Signature Ringer Design The trademark round “Ringer” grooves reflect more light than traditional flat-cut designs, creating a bold, high-end look. The shiny black finish with bright silver rings and arrows makes these stand out on any 22X-4 2.0 build. Yes, they require extra machining steps — but for racers who want their car to literally outshine the competition, it’s worth it. ✅ Features Machined from billet 6Al-4V Titanium Cold-rolled threads for strength and durability Shiny black finish (4) Bright silver Ringer grooves (4) Machined A-Arrow direction indicators 4mm adjustment center Backed by Avid replacement guarantee 🔧 Fitment TLR 22X-4 2.0 AC TLR 22X-4 2.0 DC If you're building a clean 22X-4 2.0 and want elite durability with a premium race look — this is the turnbuckle set that delivers.  

Read more less

Step up your pit setup with the Sticky Kicks RC Works Team Bottle. Built with a clean brushed aluminum finish and a true factory look, this bottle is perfect for oils, cleaners, or detail fluids at the track or in the shop. The included atomizer spray cap delivers smooth, controlled application while keeping your pit area looking professional and organized. Works Team Bottle Benefits Brushed aluminum construction Clean, factory-style appearance Atomizer spray cap for even, controlled spray Ideal for pit or workshop use A simple, dialed pit accessory that adds function and style to any race setup. 🏁  

Read more less

The JConcepts Metal Car Stand is a premium pit accessory designed for racers who demand stability, durability, and a professional workspace. Built from high-quality aluminum, this stand provides a solid platform for both 1/10 and 1/8 scale vehicles while keeping tires off the ground for maintenance, setup, and storage. Its distinctive JConcepts shape features integrated handle cut-outs for easy transport and laser-etched logos for a clean, race-ready look. Whether you’re wrenching at the track or setting up in the shop, this stand delivers the strength and stability serious racers expect. Features All-aluminum construction for strength and durability Suitable for 1/10 and 1/8 scale RC vehicles Elevated height keeps wheels off the ground Integrated handle cut-outs for easy carrying Laser-etched JConcepts logos Stable, wide-base design for pit or bench use Color Options Gray – Part #2903-8 Yellow – Part #2903-9 Includes (1) JConcepts Metal Car Stand Foam stickies for added grip and protection A must-have pit accessory for racers who want a clean, stable, and professional setup—on race day or in the workshop.    

Read more less

Upgrade your rear suspension with the Factory Team Aluminum Rear Hubs from Team Associated, designed for racers who demand precision, durability, and consistent handling. These CNC-machined aluminum hubs replace the standard plastic parts to deliver improved strength, better bearing support, and a true Factory Team look. About the Aluminum Rear Hubs Race-Focused Performance & GeometryThe -4mm offset fine-tunes rear track width to optimize suspension geometry, improving stability and cornering response—especially on high-grip or technical tracks. Precision machining ensures a direct, stress-free fit, while the anodized finish provides long-lasting wear resistance and a professional race aesthetic. Features CNC-machined aluminum construction Factory Team anodized finish -4mm offset for optimized rear geometry Improved bearing support and consistency Increased durability for competitive racing Includes (1) Left Rear Hub (1) Right Rear Hub (4) Set Screws Compatibility Team Associated RC10 B7 / B7D Team Associated RC10 B84 / B84D Team Associated RC10 SC7 Team Associated RC10 T7 Perfect for racers looking to sharpen rear-end feel, increase reliability, and add Factory Team style to their setup.  

Read more less

The Team Losi Racing TLR234132 V2 Adjustable Pivot Insert Set is a replacement and tuning solution for select 22-series and TEN platforms. This updated V2 insert set allows precise adjustment of suspension pivot geometry, giving racers greater control over handling characteristics across a wide range of track conditions. Ideal for maintenance, rebuilds, or expanding setup options on compatible Elite platforms. 🔧 Features Genuine Team Losi Racing replacement and tuning parts V2 adjustable pivot inserts for advanced suspension tuning Enables precise adjustment of pivot geometry Ideal for setup changes, rebuilds, or race-day tuning Direct fit for compatible Losi platforms 📦 Includes (28) Individual Pivot Inserts ✅ Compatibility Losi 22 5.0 Elite Losi 22X Losi 22X-4 Losi 22X-4 Elite Losi 22X-T Losi TEN-SCTE 3.0

Read more less

The Team Losi Racing TLR334076 VHA Hinge Pin Insert Set is an optional tuning pack designed for the 22 5.0 and select 22-series platforms. These inserts allow racers to fine-tune rear suspension geometry by adjusting hinge pin and axle height positions within the VHA system. Ideal for dialing in handling characteristics across different track conditions, this set is a must-have for racers running Variable Height Axle configurations. 🔧 Features Genuine Team Losi Racing option parts Designed for VHA (Variable Height Axle) tuning Allows precise rear suspension geometry adjustments Ideal for setup changes on varying track conditions Direct fit for compatible 22-series platforms 📦 Includes (6) VHA Hinge Pin Inserts ✅ Compatibility Losi 22 5.0 AC Losi 22 5.0 DC Losi 22 5.0 Elite Losi 22 5.0 SR Losi 22X Losi 22X-4 Losi 22X-4 Elite Losi 22X-T Losi TEN-SCTE 3.0

Read more less

Get fast, accurate temperature readings anywhere in your RC setup with the EcoPower Digital Infrared Temp Gauge — a lightweight, compact, non-contact tool designed specifically for RC motors, ESCs, nitro engines, batteries, chargers, and even track surfaces. Just aim, press, and read. Simple, precise, essential. Why Every RC Driver Needs This Gauge Monitoring temps is one of the easiest ways to protect your investment and improve performance. Electric Motors: Prevent demagnetization, wiring damage, and sensor failure — keep temps under ~170°F. ESCs: Avoid capacitor failure or internal board damage. Nitro Engines: Tune with confidence. Most engines like 230–270°F — anything over 290°F risks serious damage. Track Surface: Choose the right tire compound for the conditions. A temp gauge is one of the most important tools any RC racer, crawler, nitro driver, or basher can own. Features: Fast, accurate non-contact temperature readings Measures in °F or °C ±2°C precision for reliable tuning Built-in LED flashlight Data hold function Battery level indicator Ultra-compact & lightweight Includes: (1) EcoPower Digital Infrared Temp Gauge (2) AAA Batteries Specifications: Display: 1.0 × 0.74 in (26.8 × 18.8mm) Temperature Range: –58° to 500°F (–50° to 260°C) Working Temp: –0° to 50°C (–32° to 122°F) Response Time: 0.5 sec Weight: 2.29 oz (65g) Dimensions: 3.64 × 1.77 × 1.16 in (92.5 × 45 × 29.5mm)

Read more less

JConcepts Team Associated RC10B84 “F2” 1/10 4WD Buggy Body w/ Turf Wing (Clear) SKU: JC0715 (Standard) / JC0715L (Lightweight) The legendary JConcepts “F2” Body has arrived for the Team Associated RC10B84, bringing championship-winning aerodynamics to the latest generation of 4WD buggies. Developed and refined through countless podium finishes—including IFMAR World Championships—the F2 shell delivers cutting-edge handling, airflow, and balance for today’s most demanding racing surfaces. Designed for a tight chassis-hugging fit, the body slides smoothly over the B84’s layout while maintaining precise clearance over the front tower and spur-gear guard. Whether on carpet, turf, or dirt, the F2 gives you the aggressive steering and stability that racers trust to perform at the highest level. ⚙️ Features: Proven F2 World Championship design for Team Associated RC10B84 Forward-biased cab and steep windshield enhance steering response Double-step roof and side-pod design improve stability and airflow Louvered roof and Finnisher-style “V” center line reduce turbulence Rear spur-gear guard coverage with extra impact clearance Includes two 6.5" wings optimized for carpet, turf, or dirt Available in Standard and Lightweight clear polycarbonate versions Includes protective overspray film, window masks, and decal sheet 📏 Specifications: Part Number: 0715 (Standard) / 0715L (Lightweight) Vehicle Compatibility: Team Associated RC10B84 4WD Buggy Material: Clear Polycarbonate (Unpainted) Body Options: Standard or Lightweight Thickness Wing Type: 6.5" Carpet/Turf/Dirt 📦 Includes: (1) RC10B84 “F2” Clear Body (2) JConcepts Wings (1) Window Mask Sheet (1) Decal Sheet 💡 Pro Tip:Pair the F2 Body with a JConcepts Aero Front Wing (0534) to complete your aerodynamic setup—enhancing both steering precision and rear-end stability for a race-ready package proven on world-class tracks.  

Read more less

The XRAY XB4 2022 Composite Battery Clamp Set is a direct replacement designed to securely hold your battery in place during the most demanding race conditions. Molded from durable composite material, these clamps offer a lightweight and reliable solution while maintaining the factory fit and finish. Features: Precision-molded composite construction Lightweight and durable design Direct fit replacement for the XRAY XB4 2022 Ensures secure battery retention under racing stress Includes:(2) Composite Battery Clamps        

Read more less

Unleash extreme power and efficiency with the Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery. Engineered for competitive RC racing, this pack combines massive capacity, ultra-low internal resistance, and a high 140C discharge rate to deliver stable voltage, explosive acceleration, and unmatched endurance. Perfect for racers who demand consistent performance through the entire run. 🔥 Key Features: High Voltage (LiHV) 7.6V output for maximum speed and power 140C continuous discharge for exceptional punch and consistency 8500mAh capacity delivers long runtime and balanced weight Factory-matched cells for uniform voltage, capacity, and resistance Low IR design ensures stable voltage under heavy load 5mm bullet connectors provide secure, low-loss connections Built using stable automatic stacking technology for reliability Lightweight and low-profile design for chassis balance and fit 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 8500mAh Continuous Discharge: 140C Charge Rate: 1C (8.5A max recommended) Configuration: 2S1P Watt Hours: 64.4Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 139 × 47 × 25mm Weight: 10.65oz (302g) ✅ Compatibility: Ideal for 1/10 & 1/8 scale surface applications Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher racing platforms Works with Touring Car (TC6/TC7 series), 4WD Buggies, Truggies, and Short Course Trucks requiring 2S packs 📦 Includes: (1) Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always balance charge using a LiPo-compatible charger and LiPo safe bag. Never leave charging batteries unattended. Do not overcharge or discharge below 3.2V per cell. Allow batteries to cool completely before recharging. Follow proper break-in procedure for new packs (first 5 cycles at 50% discharge). 🏎️ Recommended For: 1/10 & 1/8 scale Buggy, Truggy, Touring Car, and Short Course Truck racing Ideal for spec and modified classes needing high voltage and long runtime

Read more less

Upgrade your drivetrain durability with the Team Associated RC10B74.1 Aluminum Center CVA Cups. This pair of precision-machined aluminum cups is designed to replace the stock units and withstand the demands of high-torque applications. Perfect for racers looking to reduce rotational mass while improving strength and longevity over stock plastic parts. 🔩 Key Features: Lightweight and durable aluminum construction Precision-machined for optimal fit and performance Direct replacement for stock CVA center cups Helps reduce rotational mass Improved strength for high-torque conditions 📦 Includes: (2) Aluminum Center CVA Cups ✅ Compatibility: Team Associated RC10B74.1 May fit other B74-series vehicles (check manual for fitment) Maintain peak drivetrain performance under pressure with this Factory Team upgrade.

Read more less

Upgrade your steering setup with the Team Associated Factory Team +1 Steering Block Arms, designed to improve cornering response and handling consistency. These +1mm arms provide a subtle but impactful change to the steering geometry, offering increased tunability for your RC10B74 series buggy—especially on smooth or high-traction tracks. 📌 Key Features: +1mm length for refined steering characteristics Factory Team precision upgrade Durable, CNC-machined composite construction Ideal for racers tuning for surface-specific handling 📦 Includes: (1) Left Steering Block Arm (+1) (1) Right Steering Block Arm (+1) ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2

Read more less

Overview:Keep your electronics secure and cool with the Team Associated RC10B84 Battery Holder & Fan Mount Set. Designed for the RC10B84, this set provides a lightweight, durable solution to lock your battery firmly in place while also offering a dedicated mount for a cooling fan. Perfect for racers pushing their buggy to the limit, it ensures both stability and reliable cooling during long runs or high-traction racing. Features: Secure, lightweight battery holder designed for the B84 chassis Integrated fan mount to keep electronics running cool Durable construction with precision fit Direct replacement or upgrade for easy installation Genuine Team Associated factory part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (1) Battery Holder (1) Fan Mount Required mounting hardware Part Number: 92505 ⚡ Pro Tip: Pair this set with a 30mm or 40mm high-RPM fan for maximum cooling efficiency during long mains or hot outdoor racing conditions.

Read more less

Overview:Dial in your drivetrain with the Team Associated RC10B84 Differential Height Inserts. These precision-molded inserts allow you to easily adjust the height of the differentials in your B84, fine-tuning traction, handling balance, and driveshaft angles for any track condition. A critical tuning option for racers looking to maximize consistency and performance. Features: Precision-molded inserts for differential height adjustment Fine-tunes traction and balance by changing driveshaft angles Quick and easy to install or swap at the track Durable and lightweight construction Genuine Team Associated tuning accessory Compatibility: Team Associated RC10B84 1/10 4WD Buggy (front and rear differentials) Includes: (1) Set of Differential Height Inserts (various heights) Part Number: 92513 ⚡ Pro Tip: Use a lower diff height for improved stability and traction on bumpy or low-grip tracks, and a higher diff height for increased corner speed and sharper handling on high-grip surfaces.  

Read more less

The XRAY XB4 2025 Composite Rear Lower Left Suspension Arm (Hard) is built from a stiff composite blend to maximize durability and precision. With its 3-hole shock mounting layout, this left-side arm offers multiple tuning positions while the hard material minimizes flex. Perfect for smooth, high-grip surfaces where consistency and sharp handling response are critical. Features: Factory XRAY part for the XB4 2025 Hard composite material for reduced flex and added strength 3-hole shock mount design for advanced suspension tuning Left-side rear suspension arm replacement Engineered for precision handling in demanding race conditions Includes:(1) Composite Rear Lower Left Suspension Arm – Hard (3-Hole) Compatibility: XRAY XB4 2025 May also fit select earlier XB4 models (verify with manual/parts list)

Read more less

The XRAY XB4 2025 Composite Rear Lower Right Suspension Arm (Hard) is molded from a stiffer composite blend to deliver maximum precision and durability. Featuring a 3-hole shock mounting design, this arm gives racers tuning flexibility while reducing unwanted flex in high-bite conditions. The harder material increases cornering consistency and improves handling response on smooth, high-grip tracks. Features: Genuine XRAY factory part for the XB4 2025 Molded from hard composite material for reduced flex 3-hole shock mounting for fine-tuned suspension geometry Right-side rear arm replacement Optimized for high-grip or smooth racing surfaces Includes:(1) Composite Rear Lower Right Suspension Arm – Hard (3-Hole) Compatibility: XRAY XB4 2025 May also fit earlier XB4 models (check manual/parts list)  

Read more less

⚙️ Precision Front Drivetrain HousingThe Team Associated RC10B84 Front Gearbox is a direct replacement part engineered to keep your buggy’s front drivetrain running smoothly. Made from durable composite material, this gearbox housing ensures proper alignment of your front diff and gears, maintaining consistent performance under the rigors of racing. 🔧 Features: ✅ Genuine Team Associated replacement part for the RC10B84 ✅ High-strength molded composite construction ✅ Keeps gears and differential securely in place ✅ Restores drivetrain efficiency after wear or damage 📦 Includes: (1) Front Gearbox Housing    

Read more less

📌 Restore Factory Suspension PerformanceThe Team Associated RC10B84 Front Shock Tower is a direct replacement part designed specifically for the B84 platform. Built to factory specs, this tower keeps your suspension geometry true, ensuring consistent handling and durability on the track. ⚙️ Features: Precision-molded for a direct RC10B84 fit Maintains correct suspension geometry Strong and lightweight construction Ideal replacement for worn or damaged shock towers 📦 Includes: (1) RC10B84 Front Shock Tower 💡 Pro Tip: Keep both front and rear shock towers in your pit box—having spares on hand is the fastest way to recover from a hard crash and get back in the race.  

Read more less

Team Associated RC10B84 Body – Clear (92554) 🏁 Race-Optimized Replacement – Designed specifically for the RC10B84 platform, this low-profile clear body delivers improved aerodynamics and the clean, aggressive Factory Team look. Perfect for racers who want both performance and a fresh canvas for custom paint schemes. ⚙️ Features:✅ Low-profile design for enhanced aerodynamics✅ Molded from durable, lightweight polycarbonate✅ Clear shell – ready for your custom paint job✅ Factory Team fit and finish for competitive racing 📦 Includes: (1) Clear RC10B84 Body (unpainted) 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Pair this body with lightweight wing options to further dial in downforce and stability for your track conditions.    

Read more less

Boost your steering accuracy and reliability with the Team Associated Factory Team Aluminum Clamping Servo Horn. Built for 23-tooth servos, this 20mm horn features a clamping design that locks securely in place, preventing slippage under high loads. Features: CNC-machined aluminum for superior strength and precision Clamping design ensures a secure, slip-free connection 20mm length for tuned steering leverage and response Fits 23T spline servos Factory Team quality for pro-level durability and performance Includes: (1) Aluminum Clamping Servo Horn – 23T, 20mm Ideal for racers who want maximum steering control and long-lasting reliability.

Read more less

This is a Reedy Flat Sensor Wire. The flat sensor wires that are included with the Reedy Sonic motor are now available separately in a variety of lengths to suit 1/10 and 1/8 applications! The flat design looks great and provides an extremely clean look. Choose from between 70mm and 270mm lengths.

Read more less

Team Associated RC10 4WD Ball Cups (20pcs) [6535] 🔧 Classic performance, restored! Refresh your vintage ride with this set of Team Associated RC10 4WD Ball Cups. Designed specifically for the RC10 Classic, RC10T, and RC10 Worlds editions, these molded plastic rod ends are built for strength, precision, and smooth suspension action. ✅ Direct replacement for factory originals✅ Secure fit on tie rods and turnbuckles✅ Restores tight, responsive steering and suspension✅ Made for RC10 Classic, RC10T, and RC10 Worlds Includes:(20) Ball Cups (Rod Ends) 📦 Part Number: 6535🏁 Brand: Team Associated

Read more less

Team Associated B64 Plastic Gear Differential Gear Set – ASC92076🔧 Smooth Power Transfer, Race-Ready Performance Keep your B64 running smooth with this genuine Team Associated Plastic Gear Differential Set. Whether you're rebuilding or replacing worn-out gears, this set includes everything needed for one full diff—ensuring reliable, consistent drivetrain performance on the track. ✅ Factory replacement for the RC10B64 series✅ Durable plastic gears for lightweight performance✅ Includes all internals needed for one differential rebuild 📦 Includes:• Complete internal gear set for one differential 🔢 Part Number: ASC92076🏁 Brand: Team Associated  

Read more less

This is a Team Associated Front Axle Crush Tube set, intended for use with the Team Associated RC10 B74 Team 1/10 4WD Off-Road Electric Buggy as replacement for the kit supplied front axel crush tubes. Includes: (2) Front Axle Crush Tubes 

Read more less

  Upgrade your slipper clutch with the Team Associated 19mm Octalock Slipper Pad. Featuring the Octalock design, this pad offers improved consistency, smoother power delivery, and longer-lasting performance compared to standard slipper pads. ✅ Octalock Design – Delivers smoother engagement and improved slipper consistency✅ Durable Material – Built to handle high power and repeated use✅ Direct OEM Replacement – Genuine Team Associated part for perfect fitment Includes: (1) 19mm Octalock Slipper Pad Compatibility: Team Associated vehicles equipped with 19mm Octalock spur gears and slipper assemblies (B6.2, B6.3, B6.4, T6.2, T6.4, SC6.2, SC6.4, and B74 series) Check your manual for exact fitment Part #: 92288

Read more less

Team Associated 3.5x42mm Steel Turnbuckles. These are replacement steering and front camber link turnbuckles intended for the RC10B74.2 and B74.2D series of vehicles. Package includes two 3.5x42mm turnbuckles. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

The Team Associated RC10B74.1 Factory Team "Carbon" Side Rails are an optional upgrade for the Team Associated RC10B74 series models. These carbon fiber composite option parts are impregnated with rigid and light carbon fibers inside the injection molded material to create a lighter, more durable part with optimized rigidity to create the ultimate high performance composite part.Features: Lightweight: Approximately 12% weight savings over “hard” material. Extreme Rigidity: More predictable handling in high traction applications and increased vehicle stability in fast corners. Improved Durability: Significantly improved strength over “hard” option parts. COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated Factory Team RC10B6.4/B6.4D 3.5mm Titanium Turnbuckle Set. These are optional titanium turnbuckles intended for the Team Associated B6.4 and B6.4D platforms. Constructed from high quality titanium these offer increased durability over stock components. Package includes two titanium front camber links, two titanium rear camber links and two titanium steering links.. NOTE: 3.5mm Ballcups are required for installation (ASC92308). COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Team Associated RC10B74 HD Differential Outdrives. These are replacement outdrives intended for the RC10B74 and RC10B74D buggies. Package includes two outdrives. COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Buggy Tires (2) — C4 Red (Soft Compound)Part #: 3090-C4 Dialed for Grip. Designed to Win. The Pro-Motion Viper 2.2" Low-Profile (LP) Rear Buggy Tire is built for next-level performance on high-traction carpet and turf tracks. The LP carcass reduces sidewall flex for improved stability, while the directional tread with tapered mini pins delivers smooth, predictable traction. C4 Red compound brings the extra softness needed for maximum bite in low-grip or cooler conditions. ✅ Low-profile design for reduced flex and razor-sharp response✅ C4 Red soft compound optimized for maximum traction✅ Dual mini wedge edges + radial rib for stable, consistent grip✅ Directional tread for tunable performance✅ Ideal for modern carpet and turf racing 📦 Includes:(2) Viper 2.2" Rear LP Tires(2) Black Closed Cell Inserts 💡 Pro Tip: Run C4 in colder conditions or low-grip indoor tracks to bring your setup to life.

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Pre-Mount Buggy Tires (2) — Yellow (C3 Green/Medium)Part #: 3090-C3-Y Low-Profile Speed. Carpet-Tuned Control. Engineered for precision, the Pro-Motion Viper 2.2" LP Rear Buggy Tire is built to dominate on high-traction carpet and turf tracks. With a low-profile carcass for reduced sidewall flex and quicker response, the Viper delivers unmatched stability and cornering grip. Its tapered pin tread and directional radius pattern provide predictable traction, while mini wedges and a radial rib add versatility across various conditions. ✅ Pre-mounted on yellow wheels—ready to race✅ Low-profile carcass enhances response and stability✅ Tapered mini pin design for maximum grip✅ Directional tread for fine-tuned traction control✅ Designed for 1/10 scale carpet and turf racing✅ C3 compound for medium traction balance 📦 Includes:(2) Viper LP Rear Pre-Mounted Tires(2) Foam Inserts 💡 Pro Tip: Combine with Pro-Motion Slim Front LPs for a fully dialed-in carpet setup.

Read more less