Durable factory replacement for the XB2 1/10 Buggy Overview:The XRAY XB2 Hard Graphite Composite Rear Suspension Arm delivers race-proven durability and precision handling for your XB2 1/10 buggy. Manufactured from XRAY’s exclusive hard graphite-reinforced composite, this arm provides the perfect balance of stiffness and flex—ideal for high-traction surfaces and competitive racing. About the Rear Suspension ArmThis left-side rear arm features XRAY’s signature design for smooth suspension movement and maximum impact strength. The hard graphite material improves cornering consistency and reduces flex under load, providing a more responsive feel and better traction balance across a range of track conditions. Features: Genuine XRAY Factory Team part Hard graphite composite for increased stiffness and reduced flex Provides improved steering precision and consistent cornering Ideal for high-grip indoor and outdoor tracks Precision-molded for perfect fit and geometry Lightweight yet highly durable construction Specifications: Part Type Rear Suspension Arm (Left) Material Hard Graphite Composite Vehicle Compatibility XRAY XB2 1/10 2WD Buggy Position Rear – Left Side Includes: (1) Hard Graphite Composite Rear Suspension Arm (Left)

Read more less

Upgrade your buggy’s performance with the Team Associated RC10B84 Factory Team Carbon Chassis Brace Set. Designed for the RC10B84 1/10 4WD Off-Road Electric Buggy Kit, this optional Factory Team upgrade delivers increased chassis rigidity without adding unnecessary weight. ✅ Rigid & Lightweight – Carbon construction improves stiffness while keeping weight low✅ Enhanced Handling – Added rigidity boosts steering response and overall control✅ Factory Team Quality – Precision-engineered to fit seamlessly✅ Easy Installation – A practical upgrade for serious racers Includes: (1) RC10B84 Factory Team Carbon Chassis Brace Set Compatibility: Team Associated RC10B84  

Read more less

Upgrade the drivetrain of your XRAY XB4 2024/2025 with the Exalt Hybrid-XSN Ceramic Bearing Kit. Featuring a precision-engineered hybrid design, these bearings pair Silicon Nitride ceramic balls with stainless steel inner/outer rings for smoother operation, higher speed, and greater impact resistance than traditional full steel or full ceramic bearings. Pre-lubricated with Exalt Oil Slick Hi-Speed PTFE Bearing Oil, this kit provides out-of-the-box performance that’s built for the demands of racing. 🔥 Key Features: Designed for the XRAY XB4 2024 & 2025 1/10 4WD Buggy Hybrid design: Silicon Nitride ceramic balls + stainless steel rings Faster and smoother than all-steel bearings More impact-resistant than full ceramic bearings Lightly lubricated with Exalt Oil Slick Hi-Speed PTFE Bearing Oil (EXA9314) Serviceable: clean with citrus cleaner or acetone, re-lube as needed Built for maximum performance in both spec and modified racing ✅ Compatibility: XRAY XB4 2024 XRAY XB4 2025 📦 Includes: (16) Hybrid-XSN Ceramic Bearings (complete kit for XB4 2024/2025) ⚠️ Tip:Check your bearings before each race day and re-oil as needed to ensure peak drivetrain efficiency and extended bearing life.  

Read more less

Fine-tune your drivetrain or suspension with precision using these Team Associated 5.1x8.0x0.20mm shims. Whether you're adjusting spacing, reducing play, or dialing in alignment, these thin profile shims provide the subtle tweaks that matter in competitive setups. 📏 Specifications: Inner Diameter: 5.1mm Outer Diameter: 8.0mm Thickness: 0.20mm Material: Steel Quantity: (Check product packaging—typically sold in packs) 🛠️ Common Uses: Differential spacing Suspension tuning Slop removal on pivot points or shafts ✅ Compatibility: RC10B74 series Universal use for other 5mm shaft applications Essential for racers looking for ultra-fine tuning adjustments. Keep these handy in your pit box!

Read more less

Upgrade or refresh your drivetrain with the RC10B74 Center Differential Set from Team Associated. This high-performance center diff helps balance power delivery between the front and rear, improving cornering, acceleration, and control—especially in high-traction or uneven conditions. 🔧 Key Features: Genuine Factory Team differential assembly Smooth and consistent power transfer Essential for tuning your RC10B74 for various track conditions Helps reduce drivetrain stress under heavy loads 📦 Includes: (1) Complete Center Differential Set(May include gears, outdrives, diff case, internal hardware — verify in manual) ✅ Compatibility: Team Associated RC10B74 Also fits other RC10B74 variants (check your manual for exact fitment) Keep your buggy driving like new with this premium center diff set, built to deliver the precision and durability Team Associated is known for.

Read more less

Upgrade your RC10B74's steering performance with the 9-degree Caster Blocks from Team Associated. Designed for precision and durability, these caster blocks deliver improved cornering stability and increased on-power steering response. 🛠️ Key Features: 9° caster angle for improved handling characteristics Factory Team quality with tight manufacturing tolerances Durable composite construction Direct fit for RC10B74 front suspension 📦 Includes: (1) Pair of 9° Caster Blocks (left & right) ✅ Compatibility: Team Associated RC10B74 and variants (check manual for specific fitment) Ideal for racers looking to fine-tune front-end geometry to suit different track conditions. A must-have tuning option for competitive setups.

Read more less

Fine-tune your RC10B74.2’s rear suspension geometry with this Rear Gearbox Adjustable Height Insert Set. Whether you're dialing in anti-squat or adjusting rear drive angles, these inserts give you the flexibility to get the most out of your setup. 📌 Key Features: Precision-molded plastic insert set Allows for rear gearbox height adjustment Fine-tune rear suspension geometry and anti-squat Designed specifically for RC10B74.2 and RC10B74.2D platforms 📦 Includes: Multiple insert pairs for adjustable configurations Designed to work with standard rear gearbox components ✅ Compatibility: RC10B74.2 RC10B74.2D Ideal for racers looking to squeeze out extra performance on varying track conditions — essential for serious 1/10 4WD competition setups.

Read more less

Team Associated RC10B74.2 FT Center Dogbone Blades (Part #92374) Keep your drivetrain running smooth and efficient with the Factory Team Center Dogbone Blades for the RC10B74.2. These precision-machined blades are engineered to reduce friction, minimize wear, and provide consistent performance under extreme racing conditions. A must-have for serious 1/10 4WD racers looking to maintain their competitive edge. 📌 Key Features: Genuine Factory Team upgrade Designed specifically for center dogbones Reduces friction and drivetrain wear Improves longevity and performance Lightweight and durable material 📦 Includes: (4) Center Dogbone Blades ✅ Compatibility: Team Associated RC10B74.2 RC10B74.2D May also fit other B74 variants with center dogbone setup

Read more less

The Team Associated Factory Team Steering Block Arms +2 are a precision upgrade for your RC10B74 series vehicle. With a 2mm longer length than stock, these arms enhance steering geometry for improved handling and tuning options—especially beneficial on high-bite surfaces where extra steering stability is critical. 📌 Key Features: +2mm longer for refined steering geometry Factory Team upgrade for precision fit and durability CNC-machined for consistent performance Ideal for tuning your RC10B74.2 to specific track conditions 📦 Includes: (1) Left Steering Block Arm (+2) (1) Right Steering Block Arm (+2) ✅ Compatibility: RC10B74 RC10B74.1 RC10B74.2

Read more less

Overview:Maintain precise steering response with the Team Associated RC10B84 Steering Links & Pivot Ball Sockets. Designed as genuine factory replacements, these parts restore proper geometry and eliminate unwanted slop when your originals show signs of wear. Perfect for racers who demand consistent handling and durability from their B84. Features: Complete set of steering links and pivot ball sockets Molded to factory specs for perfect fitment Durable construction withstands the demands of racing Direct replacement for worn or damaged parts Genuine Team Associated replacement part Compatibility: Team Associated RC10B84 1/10 4WD Buggy Includes: (2) Steering Links (4) Pivot Ball Sockets Part Number: 92523 ⚡ Pro Tip: Combine these with the RC10B84 turnbuckle set (92558) for a fully refreshed and precise steering assembly.

Read more less

Upgrade your shocks with the XRAY Aluminum Shock Cap Nuts. Machined from premium Swiss 7075 T6 aluminum, these cap nuts include a precision vent hole that allows trapped air to escape during assembly for smoother and more consistent shock performance. Features: CNC-machined from high-quality Swiss 7075 T6 aluminum Integrated vent hole for bubble-free shock bleeding Designed for Big Bore shocks Hard-anodized finish for long-lasting durability Lightweight design without sacrificing strength Includes: (2) Aluminum Shock Cap Nuts with Vent Hole Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) XRAY XB4 (4WD Buggy) Other XRAY models equipped with Big Bore shocks (check manual)

Read more less

Upgrade your XRAY XB4 with the 2025 Carbon Fiber Rear Shock Tower designed for the HS (High Strength) bulkhead. Featuring a 3-dot configuration, this tower is precision CNC-machined from premium carbon fiber to deliver the perfect balance of strength and low weight. Optimized geometry improves suspension performance, durability, and consistency, giving you an edge on today’s demanding tracks. Features: Genuine XRAY factory part for the XB4 2025 CNC-machined from premium carbon fiber 3-dot shock position design for precise tuning Lightweight yet highly durable construction Direct replacement for the stock shock tower Designed for use with HS bulkhead Includes:(1) Carbon Fiber Rear Shock Tower (HS Bulkhead) – 3 Dots Compatibility: XRAY XB4 2025 (with HS Bulkhead) May fit earlier XB4 models when converted with HS bulkhead system    

Read more less

The XRAY Graphite Composite Steering Block is a high-strength upgrade designed to improve steering precision and durability on your XB4 buggy. Constructed from graphite-reinforced composite, it reduces flex while keeping weight low — giving you sharper, more predictable control in every corner. About the Steering BlockWith an optimized geometry for smoother Ackermann response and consistent steering feel, this steering block is ideal for today’s high-grip racing conditions. Its tough composite material ensures reliability through hard impacts and long race days. Features: Graphite-reinforced composite construction for maximum rigidity Optimized geometry for precise steering response Lightweight and durable race-proven design Direct replacement for the stock steering block Includes:(1) Graphite Composite Steering Block Compatibility: XRAY XB4 1/10 4WD Buggy (2022+ models, check manual for fit)

Read more less

🏁 Factory Replacement PartThe RC10B84 Center Bulkhead (Diff) is a direct replacement designed specifically for the differential configuration of your B84 buggy. It provides a rigid and precise mounting point for the center diff, keeping your drivetrain secure and efficient during the toughest race conditions. ⚙️ Features: ✅ Fits RC10B84 with center differential configuration ✅ Ensures proper alignment and smooth drivetrain operation ✅ High-strength materials for durability and consistent performance ✅ Genuine Team Associated quality and fit 📦 Includes: (1) RC10B84 Center Bulkhead (Diff) 💡 Pro Tip: Pair with the ASC92529 Center Bulkhead Brace (Diff) for added stability and long-term reliability.  

Read more less

🔧 Secure Your DrivetrainThe RC10B84 Center Bulkhead Brace (Diff) is a precision replacement part engineered to stabilize the center differential assembly. By reinforcing the bulkhead area, it helps maintain drivetrain alignment, reduces flex, and ensures consistent power delivery under high-stress racing conditions. ⚙️ Features: ✅ Direct replacement part for the RC10B84 ✅ Designed specifically for center differential configuration ✅ Provides additional strength to prevent chassis flex ✅ Durable and race-tested Factory Team quality 📦 Includes: (1) RC10B84 Center Bulkhead Brace (Diff) 💡 Pro Tip: Pair this with the FT Bearing Set (ASC92544) to keep your drivetrain smooth and efficient through long mains.        

Read more less

🏁 Factory Team Efficiency UpgradeSwap in the Factory Team molded ring & pinion to reduce rotating mass and keep your B84’s diff running smooth and quiet. Precision-molded tooth profiles deliver consistent mesh and improved drivetrain efficiency. ⚙️ Features: ✅ Molded construction for lighter rotational mass and quieter operation ✅ Factory Team quality for precise tooth geometry and smooth mesh ✅ Direct fit for the RC10B84 differential ✅ Ideal spare or performance swap for efficiency-focused setups 📦 Includes: (1) Molded Ring Gear (1) Molded Pinion Gear 💡 Pro Tip: Great for stock-class efficiency. If you run high-power/mod setups, keep an eye on wear and diff shim settings to maintain a perfect mesh.  

Read more less

🔧 Restore Rear-End Structure – The RC10B84 Rear Shock Tower is a direct replacement part designed to bring your buggy back to factory specifications. It ensures consistent suspension geometry and handling after wear, damage, or heavy use. ⚙️ Features:✅ Direct replacement for the stock RC10B84 rear shock tower✅ Maintains suspension geometry and stable handling✅ Durable composite construction for long-lasting performance✅ Designed for easy fit and reliability 📦 Includes: (1) RC10B84 Rear Shock Tower 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Consider keeping an extra shock tower on hand — they’re a common part to break in hard landings, and a quick swap can save your race day.  

Read more less

🔧 Precision Steering Control – Keep your B84’s front end dialed with the Factory Team Front Hubs. Designed for durability and tuning flexibility, these hubs ensure consistent steering response and smooth suspension geometry under race conditions. ⚙️ Features:✅ Precision-molded for a perfect fit on the B84 platform✅ Multiple camber link mounting holes for fine-tuned steering feel✅ Durable construction for long-lasting performance✅ Factory Team quality parts for competitive-level racing 📦 Includes: (1) Left Front Hub (1) Right Front Hub 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Use the inner camber link holes for more aggressive steering on tight tracks, and the outer holes for smoother, more stable cornering.

Read more less

⚡ Keep the Power Flowing – Replace or upgrade your drivetrain with the Factory Team 102mm Center CVA Bone for the RC10B84. Precision-machined for smooth rotation and durability, this part ensures consistent power transfer through your buggy’s center driveline. ⚙️ Features:✅ 102mm length – designed specifically for the RC10B84✅ Precision-machined for smooth, efficient drivetrain performance✅ Strong, durable construction for long-lasting use✅ Factory Team quality for competitive racing 📦 Includes: (1) 102mm Center CVA Bone 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Always check for wear at the pins and outdrives—swapping CVA bones before they fail helps protect more expensive drivetrain parts.    

Read more less

⚡ Durability Where It Matters – Take your drivetrain to the next level with the Factory Team LTC Metal Differential Set for the B84. Designed to withstand the demands of top-tier racing, these precision-machined diffs deliver smooth, consistent power transfer and extended life. ⚙️ Features:✅ Complete front & rear metal differentials for maximum durability✅ Longer wear life than composite options✅ Factory Team precision for smoother operation✅ Engineered specifically for the RC10B84 📦 Includes: (1) Front LTC Metal Differential Assembly (1) Rear LTC Metal Differential Assembly 🔧 Compatibility: Team Associated RC10B84 💡 Pro Tip: Pair with Factory Team diff fluids to fine-tune traction and stability based on track grip levels.

Read more less

Team Associated 13mm Front Shock Spring. These optional springs are intended for the Team Associated B6.4D and the B6.4. Package includes two springs. Effects of Shock Spring Changes  Shock Spring  Characteristic  Softer Increased Chassis Roll Increased Traction Better in Bumpy Conditions More Likely to Bottom Out  Stiffer Decreased Chassis Roll Decreased Traction Increased Responsiveness COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2DTeam Associated RC10B6.4Team Associated RC10B6.4D

Read more less

This is a Team Associated "B" Arm Mount, intended for use with the Team Associated RC10 B74 Team 1/10 4WD Off-Road Electric Buggy to replace the kit supplied rear "B" Arm Mount. This contains one anodized blue arm mount. COMPATIBILITY: Team Associated RC10 B74 OriginalTeam Associated RC10 B74.1Team Associated RC10 B74.1DTeam Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated Graphite Rear Hub Link Shim Set: RC10B74   ASC92185

Read more less

Team Associated Factory Team 3.5mm Titanium Turnbuckle Set. This is an optional titanium turnbuckle set intended for the Team Associated B74.2 platform. Constructed from high quality titanium these offer increased durability over stock components and replace all the stock turnbuckles.Includes: (2) 3.5x45mm Titanium Turnbuckles (4) 3.5x42mm Titanium Turnbuckles (1) 3.5x35mm Titanium Turnbuckle COMPATIBILITY: Team Associated RC10 B74.2Team Associated RC10 B74.2D

Read more less

Team Associated Factory Team B6.4/B6.4D 3.5x48mm Titanium Turnbuckles. These are optional titanium turnbuckles intended for the Team Associated B6.4 and B6.4D platforms. Constructed from high quality titanium these offer increased durability over stock components. Package includes two 3.5x48mm turnbuckles. NOTE: 3.5mm Ballcups are required for installation (ASC92308). COMPATIBILITY: Team Associated RC10B6.4Team Associated RC10B6.4D

Read more less

Stronger. Stiffer. Race-Ready. Upgrade your steering and camber links with the Team Associated 3.5x48 mm Steel Turnbuckles — a precision-built Factory Team option for racers who demand maximum strength and reliability. Perfect for high-stress race conditions, these heavy-duty steel links add confidence to every corner and landing. Performance Upgrade Designed to replace standard turnbuckles on the RC10B6, RC10T6, and RC10SC6 platforms, this 3.5 mm version provides added stiffness and durability when used with 3.5 mm ballcups (92308). The result is tighter handling, smoother steering response, and reduced flex over time — a must-have for competitive racers and bashers alike. Features: Heavy-duty 3.5 mm steel construction for extreme strength Increased stiffness for consistent steering geometry Works with 3.5 mm ballcups (#92308) Ideal upgrade for high-traction and high-impact racing Factory Team precision fit and finish Includes: (2) 3.5 × 48 mm Steel Turnbuckles Compatibility: Team Associated RC10 B6 series Team Associated RC10 T6 series Team Associated RC10 SC6 series Team Associated Factory Team — Engineered to Win.

Read more less

1UP Racing X-Gear 13mm Front & Rear Buggy Pro Pack Springs (Firm) (6) – 1UP10530 Upgrade your suspension tuning with the 1UP Racing X-Gear 13mm Front & Rear Buggy Pro Pack. Developed in partnership with X-Gear Co. of Japan, this set includes six precision-engineered firm springs for both the front and rear of your 1/10 scale buggy. Whether you're hitting rough tracks or carving tight corners, these springs deliver superior grip, stability, and control to give you the edge in any condition. Features: Designed in collaboration with X-Gear Japan for pro-level performance Improves grip, bump handling, and cornering control Optimized for smooth landings and consistent chassis behavior Covers a range of firm-rate spring options to fine-tune setup Tested by top drivers across various racing surfaces Includes:Front Springs (13mm) (2) 3X Hard / Pink (2) 4X Hard / Silver (2) 5X Hard / Orange Rear Springs (13mm) (2) Extra Hard / Blue (2) 2X Hard / Green (2) 3X Hard / Pink  

Read more less

JConcepts F2 Lightweight Body for XRAY XB4 2024 – Includes Two 6.5" Wings💨 Championship-Proven Aero, Now in Lightweight Form Take your XRAY XB4 2024 to the next level with the JConcepts F2 Lightweight Body — designed for racers chasing every ounce of performance. Based on the IFMAR World Championship-winning design, the F2 body blends a forward cab bias, louvered roof, and signature Finnisher “V” styling for ultimate responsiveness and downforce. Now molded in a lightweight polycarbonate, this variant reduces overall mass for quicker transitions, faster acceleration, and a more planted feel on high-grip surfaces. Perfectly contoured to the XRAY XB4 2024 chassis, the F2’s tight layout offers plenty of clearance for your battery, servo, and motor configuration, while delivering a clean fit around the front bulkhead and top deck. ✨ Key Features: Lightweight polycarbonate construction for reduced mass Direct fit for XRAY XB4 2024 Forward cab bias with aggressive windshield angle Louvered roof, double-step side-pods, and rear kick-up for stable aero Accommodates modern 4WD electronics layouts Includes (2) 6.5" Carpet | Turf | Dirt Wings Window masks and JConcepts decal sheet included 📦 Includes: (1) Clear Lightweight F2 Body for XRAY XB4 2024 (2) 6.5" Wings (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Product ships clear and uncut. Painted body shown for illustration only. Compatibility:  • XRAY XB4 2024

Read more less

Upgrade or service your Team Associated transmission with the Factory Team Aluminum Idler Shaft Set. These lightweight aluminum shafts support the transmission idler gears and are used across a wide range of Team Associated 1/10 scale platforms, including the current RC10B7/B7D and many earlier B6-series vehicles. ⚡ Features: Genuine Team Associated Factory Team part Lightweight aluminum construction Supports the transmission idler gear Helps reduce drivetrain weight compared with heavier shaft materials Precision fit for compatible Team Associated transmissions Direct replacement / Factory Team upgrade Two shafts included Compatible with numerous Team Associated 1/10 platforms 📦 Includes: (2) Factory Team Aluminum Idler Shafts 📏 Specifications: Manufacturer: Team AssociatedPart Number: ASC91132 / 91132Material: AluminumPart Type: Transmission Idler ShaftQuantity: 2 🔧 Compatibility: Compatible with a wide range of Team Associated vehicles, including: RC10B7 / B7D RC10B6 / B6D RC10B6.1 / B6.1D RC10B6.2 / B6.2D RC10B6.3 / B6.3D RC10B6.4 / B6.4D RC10B5 / B5M RC10T6.1 / T6.2 RC10SC6.1 / SC6.2 DR10 / DR10M SR10 RB10 SC10 4x4 Additional compatible Team Associated platforms 💡 Pro Tip: Because these shafts sit inside the transmission and support the idler gears, inspect the idler gear bearings and gear teeth whenever you have the gearbox apart. Replacing worn bearings at the same time can help keep the transmission running freely and consistently.  

Read more less

🔋🔌 A Simple Solution for 4S LiPo Balance ConnectionsThe ProTek RC 4S LiPo Charge/Balance Adapter is designed to provide an XH female to XH female connection for compatible 4S LiPo charging and balancing setups. It’s a handy addition to the pit box when you need to adapt between compatible XH balance connections.🔋 About the 4S LiPo Charge/Balance Adapter🔌 XH Female to XH FemaleThis adapter features an XH female connector on each end, allowing compatible 4S balance connections to be joined without modifying your existing wiring.⚙️ Made for 4S LiPo ApplicationsDesigned specifically for compatible 4S LiPo battery balance connections, making it useful for charging setups that require a female-to-female XH adapter.🧰 Great for the Pit BoxSmall charging adapters are easy to need and not have. Keeping the correct adapter on hand can make setting up your charger at home or at the track much easier.✨ Features✔ Designed for 4S LiPo applications✔ XH female connector on both ends✔ Provides a female-to-female balance connection✔ Compact and easy to keep in your charging gear✔ Useful for compatible charging and balancing setups✔ Genuine ProTek RC accessory📦 Includes (1) ProTek RC 4S LiPo Charge/Balance Adapter🔧 Compatibility Compatible 4S LiPo charging and balance setups using XH connections📝 Notes Verify your battery and charger balance connector type before use. This adapter is intended for the balance connection and does not replace the battery’s main charge lead.

Read more less

🏁⚙️ Sharpen Up Your Rear Suspension ResponseThe Aerox Long 1/10 Off-Road Rear Agile Spring Tuning Set is designed for racers looking for sharp, responsive handling and precise suspension control. Engineered by Schumacher, this four-pair tuning set gives you a range of rear spring options for dialing in your buggy as track conditions and grip levels change.🏁 About the Agile Rear Spring Set⚡ Sharp & Responsive HandlingAerox Agile springs are designed to deliver quick response and flatter cornering characteristics, making them a great tuning option for faster layouts and conditions where a responsive chassis is preferred.⚙️ Fine Suspension TuningClosely spaced spring-rate increments allow for small, precise setup changes, helping racers fine-tune rear traction, chassis roll, and overall responsiveness.🔧 Long Length Rear SpringsThis set features Long rear springs for compatible 1/10 off-road buggy applications, with easy identification between the different spring options for quick setup changes at the track.✨ Features✔ Four pairs of Long rear springs✔ Agile spring characteristics for sharp handling✔ Designed for flatter, responsive cornering✔ Allows precise suspension setup changes✔ Close spring-rate increments for fine tuning✔ Designed for 1/10 off-road buggy applications✔ Eight individual springs included📦 Includes (4) Pairs Aerox Long 1/10 Off-Road Rear Agile Springs (8) Individual Springs Total📝 Tuning Notes Softer springs: Increase chassis roll and traction, perform better in bumpy conditions, and are more likely to bottom out. Stiffer springs: Decrease chassis roll and traction while increasing responsiveness. This is the Long Rear Agile tuning set.

Read more less

🏁⚙️ Sharpen Up Your Front-End ResponseThe Aerox Medium 1/10 Off-Road Front Agile Spring Tuning Set is designed for racers looking for sharp, responsive handling and precise suspension control. Engineered by Schumacher and tested by top drivers, these springs provide four pairs of tuning options to help dial in your buggy for changing track conditions.🏁 About the Agile Front Spring Set⚡ Sharp & Responsive HandlingAerox Agile springs are designed to provide quick, precise response with flatter cornering characteristics, making them especially well suited for faster track layouts where sharp handling is key.⚙️ Fine Suspension TuningConstant wire diameter and closely spaced spring-rate increments allow racers to make small, controlled suspension changes rather than large jumps between setups.🔧 Medium Length Front SpringsThis set features Medium length front springs designed for compatible 1/10 off-road buggy applications. Color coding makes the different spring options easy to identify when making setup changes at the track.✨ Features✔ Four pairs of Medium front springs✔ Agile spring characteristics for sharp handling✔ Designed for flatter, responsive cornering✔ Engineered by Schumacher✔ Tested by top-level drivers✔ Constant wire diameter for consistent performance✔ Close rate increments for precise tuning✔ Color coded for easy identification✔ Designed for 1/10 off-road buggy applications📦 Includes (4) Pairs Aerox Medium 1/10 Off-Road Front Agile Springs (8) Individual Springs Total🔧 Compatibility Schumacher CAT K1 Schumacher CAT K1 Aero Schumacher CAT K2 Schumacher CAT L1 Schumacher CAT SX2 Schumacher CAT SX3 Schumacher Cougar KF Schumacher Cougar KF2 Schumacher Cougar KF2 SE Schumacher Cougar KR Schumacher Cougar LD2 Schumacher Cougar Laydown Schumacher Cougar SV Schumacher Cougar SV2 Schumacher Cougar SVR Schumacher Storm ST📝 Tuning Notes Softer springs: Increase chassis roll and traction, perform better in bumpy conditions, and are more likely to bottom out. Stiffer springs: Decrease chassis roll and traction while increasing responsiveness. This is the Medium Front Agile tuning set.

Read more less

🏁⚙️ Dial In Your Suspension with Seven Spring RatesThe Core RC High Response Medium Spring Tuning Set gives racers a convenient range of suspension springs for fine-tuning their off-road setup. With seven pairs of springs included, this tuning set makes it easy to adjust suspension response as track conditions and grip levels change.🏁 About the High Response Spring Tuning Set⚙️ Seven Pairs for Fine TuningWith seven different pairs included, racers can make smaller spring changes to dial in chassis balance, traction, and responsiveness without needing to purchase each pair separately.🏎️ High Response DesignCore RC High Response springs are designed to provide responsive suspension performance, giving racers additional control over how the chassis reacts through corners, bumps, and quick direction changes.🔧 Medium Length SpringsThis is the Medium length High Response tuning set, designed for compatible off-road buggy big bore shock applications requiring medium-length springs.✨ Features✔ High Response spring design✔ Medium length configuration✔ Seven pairs of springs included✔ Allows precise suspension tuning✔ Helps tune traction, chassis roll, and responsiveness✔ Designed for off-road racing applications✔ Convenient complete tuning set📦 Includes (7) Pairs Core RC Medium High Response Springs (14) Individual Springs Total📝 Tuning Notes Softer springs: Increase chassis roll and traction and can work better in bumpy conditions. Stiffer springs: Reduce chassis roll and provide increased responsiveness. This is the Medium length spring tuning set. Individual spring rates were not provided in the supplied product information, so they are not listed here.

Read more less

🏁⚙️ Fine-Tune Your Suspension with High Response SpringsThe Core-RC Long Length High Response Spring Tuning Set was developed by Schumacher engineers and top-level drivers across a wide range of track conditions, from low-grip dirt to high-grip carpet. Designed for off-road buggies using big bore shocks, these springs provide increased responsiveness while allowing racers to make precise suspension adjustments with closely spaced spring rates.🏁 About the High Response Spring Tuning Set⚙️ Four Spring Rates for Precise TuningThe set includes four different spring rates ranging from 2.0 to 2.6 lb/in, allowing small, controlled setup changes to suit changing grip levels, track conditions, and driving preferences.🏎️ High Response DesignCompared with alternative CORE RC and Schumacher Big Bore Springs, the High Response design uses fewer coils and a thinner wire diameter to improve responsiveness while reducing weight.🔧 Lightweight & ConsistentThe High Response springs provide an average weight savings of approximately 4 grams per pair compared with previous CORE RC springs. Constant wire diameter, precision-ground ends, and close rate increments help provide consistent performance and accurate tuning.✨ Features✔ Four spring rates included for suspension tuning✔ Developed for off-road buggy racing✔ Tested from low-grip dirt to high-grip carpet✔ High Response design for improved responsiveness✔ Fewer coils and thinner wire diameter✔ Approximately 4g average weight savings per pair✔ Close spring-rate increments for fine adjustments✔ Constant wire diameter✔ Precision-ground ends✔ Black-coated springs with easy rate identification✔ Designed for rear big bore shock applications📦 Includes (2) CR808 Long Red High Response Springs – 2.0 lb/in (2) CR809 Long Green High Response Springs – 2.2 lb/in (2) CR810 Long Blue High Response Springs – 2.4 lb/in (2) CR811 Long Black High Response Springs – 2.6 lb/in🔧 CompatibilityDesigned for rear big bore shock applications including: Schumacher Cougar Laydown Schumacher CAT L1 EVO Other compatible vehicles using big bore shocks📝 Tuning Notes Softer springs: Increase chassis roll and traction, work better in bumpy conditions, but are more likely to bottom out. Stiffer springs: Decrease chassis roll and traction while increasing responsiveness. This set includes 8 individual springs total — two of each of the four spring rates.

Read more less

🏁🔧 Refresh Your XB4 Shocks with Genuine XRAY ComponentsThe XRAY Composite Shock Part Set is a genuine replacement parts package designed for the XRAY XB4 1/10 4WD buggy. This convenient set includes the key composite components needed to replace worn or damaged parts on two shock assemblies.🏁 About the Composite Shock Part Set⚙️ Complete Shock ComponentsThe set includes two shock caps, two spring cups, and two shock rod ends, making it an easy way to replace several commonly used shock components at once.🔧 Composite ConstructionXRAY's composite components provide the proper fit and function required for smooth, reliable shock operation.🏎️ Made for the XB4Designed specifically for the XRAY XB4 platform, these genuine replacement parts provide direct-fit compatibility with the factory shock assemblies.✨ Features✔ Genuine XRAY replacement parts✔ Composite construction✔ Replacement components for two shocks✔ Includes shock caps, spring cups, and rod ends✔ Direct-fit replacement for the XRAY XB4📦 Includes (2) Shock Caps (2) Spring Cups (2) Shock Rod Ends🔧 Compatibility XRAY XB4 1/10 4WD Buggy📝 Notes Genuine XRAY replacement parts. Includes composite shock components only. Shocks and other suspension components are sold separately.

Read more less

The ProTek RC SG3 HV ULCG Shorty LiPo Battery combines a lightweight, ultra-low center of gravity design with low internal resistance and high-voltage Silicon Graphene technology. Designed with competitive 1/10 buggy racing in mind, this 4600mAh 2S pack delivers consistent power, improved efficiency, and cooler operating temperatures throughout the run. About the SG3 HV ULCG Shorty LiPo Battery High-Voltage Performance Featuring ProTek's third-generation Silicon Graphene high-voltage cell technology, this pack provides a 7.6V nominal voltage with a 150C peak discharge rating. Lower internal resistance helps improve efficiency and power delivery while reducing operating temperatures. Ultra-Low Center of Gravity The compact 18.5mm height and 155g weight help lower the vehicle's center of gravity and optimize weight balance for improved handling. The shorty configuration is well suited for both 2WD and 4WD 1/10 buggy racing. Race-Ready Connections The battery features 5mm bullet connections and a 2mm balance connection. Two 5mm-to-4mm bullet reducers are also included for additional setup flexibility. Features ✔ 7.6V 2S high-voltage LiPo configuration✔ 4600mAh capacity✔ 150C peak discharge rating✔ Low internal resistance (Low IR) design✔ SG3 third-generation Silicon Graphene technology✔ Ultra-low center of gravity (ULCG) shorty configuration✔ Designed for consistent power delivery and improved efficiency✔ Compact 18.5mm pack height✔ 5mm bullet battery connections✔ 2mm bullet balance connection✔ 5mm-to-4mm bullet reducers included✔ Ideal for 1/10 2WD and 4WD buggy racing✔ ROAR Approved Includes (1) ProTek RC 2S 150C Low IR SG3 HV ULCG Shorty LiPo Battery – 7.6V/4600mAh (2) 5mm to 4mm Bullet Reducers (2) 5mm Bullet Connectors (1) 2mm Balance Bullet Connector Needed to Complete LiPo-compatible balance charger capable of charging 2S high-voltage (LiHV) batteries Appropriate charging leads/connections for your charger LiPo-safe charging bag or container Specifications Specification Details Brand ProTek RC Part Number PTK-5124-26 Battery Type Silicon Graphene High-Voltage LiPo Configuration 2S1P Nominal Voltage 7.6V Capacity 4600mAh Peak Discharge Rate 150C Maximum Charge Rate 1.5C Watt Hours 34.9Wh Battery Connector 5mm Bullets Balance Connector 2mm Bullet Dimensions 47 x 96 x 18.5mm Weight 155g (5.4oz) ROAR Approved Yes Notes Always use a LiPo-compatible balance charger and LiPo-safe charging bag or container. Never leave LiPo batteries unattended while charging. Do not charge the battery while installed in the vehicle. Do not overcharge or over-discharge the battery. End voltage should not be allowed to drop below 3.2V per cell. Allow the battery to cool completely before recharging after use. Read and follow all battery and charger safety instructions before use.  

Read more less