Fine-tune your XB2’s rear-end handling with the XRAY Short Rear Anti-Roll Bar series. Designed for precision adjustment, these sway bars control body roll and improve cornering stability, giving you the flexibility to adapt your buggy to any track condition. A softer bar provides more rear grip and smoother steering response, while a stiffer bar sharpens steering and reduces rear traction. Choose the perfect thickness to match your setup! Available Sizes: 1.0mm (323490) – Softest 1.1mm (323491) 1.2mm (323492) 1.3mm (323493) 1.4mm (323494) 1.6mm (323496) – Hardest Effects of Rear Roll Bar Changes: Softer Bar: Increases chassis roll Increases rear grip in corners Decreases on-power steering Car responds more slowly to direction changes Stiffer Bar: Decreases chassis roll Decreases rear grip in corners Increases on-power steering Car responds quicker to direction changes Features: High-quality spring steel construction Short design for precise handling response Essential tuning part for competitive setups Compatibility: XRAY XB2 (All Versions) Includes: (1) Short Rear Anti-Roll Bar (size selected)    

Read more less

The XRAY Composite Front Bridge Upper Deck provides extra rigidity and stability to your chassis setup. Precision-molded from high-quality composite material, this part is designed for strength without unnecessary weight, giving your buggy the perfect balance of performance and durability. Features: Molded composite construction for strength and consistency Helps increase front-end stability Lightweight design maintains optimal chassis flex Direct replacement part for quick installation Compatibility: XRAY XB2 (various years) XRAY XT2 (various years)

Read more less

The XRAY Differential Gasket Set is a must-have replacement pack for maintaining smooth, leak-free differential performance. Made from precision-cut, high-quality material, these gaskets create a perfect seal to keep diff oil where it belongs and extend the life of your drivetrain. Features: Precision fit to ensure consistent diff sealing High-quality material resists wear and compression Maintains smooth, reliable differential action Essential for regular maintenance and rebuilds Includes:(4) Differential Gaskets Compatibility: Fits XRAY differentials across multiple platforms (commonly used in XB2, XB4, XT4, and related models)

Read more less

The XRAY XB2 Front Inner Suspension Pivot Pins are precision-machined replacements built to handle the demands of competitive racing. Designed for strength and accuracy, these pins maintain exact suspension geometry for consistent handling and durability. Features: High-strength steel construction Precision fit for smooth suspension operation Maintains accurate geometry under load Direct replacement for the XB2 buggy Includes:(2) Front Inner Suspension Pivot Pins      

Read more less

The XRAY Composite 48P Slipper Eliminator Spur Gear is a precision-molded 72-tooth spur designed for racers who prefer maximum efficiency and direct power delivery. By eliminating the slipper assembly, this gear reduces rotating mass and ensures a more consistent throttle response, making it ideal for high-traction surfaces where a slipper is not required. Features: 48 pitch, 72-tooth composite spur gear Eliminates slipper clutch for direct drive efficiency Lightweight, precision-molded construction Delivers consistent throttle response Perfect for high-traction racing conditions Includes:(1) 72T Slipper Eliminator Spur Gear      

Read more less

Team Associated 4mm Factory Team Heavy Duty Titanium Ball Stud Set (2) (91750)Upgrade your RC ride with strength and precision! The Team Associated Factory Team 4mm Heavy Duty Titanium Ball Stud Set offers superior durability with lightweight performance. Perfect for high-stress suspension points where reliability matters most. Includes: (2) 4mm Heavy Duty Titanium Ball Studs Factory Team Quality — Trusted by Pros!

Read more less

Team Associated RC10 B6.2 CVA Axle (2) [91858] 🔧 Keep your ride tight and true! These Team Associated RC10 B6.2 CVA Axles are direct replacement parts designed to restore the performance and precision of your buggy's driveline. Whether you're rebuilding or just stocking up, these 2 high-quality axles are built to take the abuse of competitive 1/10 off-road racing. ✅ Compatible with B6.2 & B6.2D✅ Precision-machined for smooth drivetrain action✅ Sold in pairs Includes:(2) CVA Axles 📦 Part Number: 91858🏁 Brand: Team Associated

Read more less

  Upgrade your slipper clutch with the Team Associated 19mm Octalock Slipper Pad. Featuring the Octalock design, this pad offers improved consistency, smoother power delivery, and longer-lasting performance compared to standard slipper pads. ✅ Octalock Design – Delivers smoother engagement and improved slipper consistency✅ Durable Material – Built to handle high power and repeated use✅ Direct OEM Replacement – Genuine Team Associated part for perfect fitment Includes: (1) 19mm Octalock Slipper Pad Compatibility: Team Associated vehicles equipped with 19mm Octalock spur gears and slipper assemblies (B6.2, B6.3, B6.4, T6.2, T6.4, SC6.2, SC6.4, and B74 series) Check your manual for exact fitment Part #: 92288

Read more less

Team Associated RC10B7/RC10B7D Laydown Gearbox – Precision Replacement for 2WD Performance! 🔧 Keep your buggy in top form with this genuine replacement Laydown Gearbox Housing for the Team Associated RC10B7 and RC10B7D. Designed specifically for the 2WD platform, this gearbox delivers the durability, fit, and reliability you expect from Team Associated — straight from the Factory Team lineup. ⚙️ Key Features: ✅ Official Team Associated replacement part✅ Designed for laydown transmission configuration✅ Ensures proper gear mesh and alignment✅ Molded for durability and exact fitment✅ Ideal for maintenance, rebuilds, or spares 📦 Includes: (1) Laydown Gearbox Housing ✅ Compatibility: Team Associated RC10B7 Team Associated RC10B7D 💡 Maintain top-tier performance with factory-spec reliability.Team Associated—trusted by champions. 🏁🔩

Read more less

Team Associated RC10B7 Chassis [92400] 🛠️ Built to Battle, Ready to RaceRefresh your ride with the Team Associated RC10B7 Chassis — the factory replacement designed to get your buggy back in action and keep it dominating the track. Crafted for strength and performance, this is the exact chassis used on the legendary RC10B7 platform. ✅ Precision fit✅ Factory quality✅ Made to handle serious abuse Includes:(1) RC10B7 Chassis Part Number: 92400Compatibility: RC10B7 1/10 Buggy

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Buggy Tires (2) — C4 Red (Soft Compound)Part #: 3090-C4 Dialed for Grip. Designed to Win. The Pro-Motion Viper 2.2" Low-Profile (LP) Rear Buggy Tire is built for next-level performance on high-traction carpet and turf tracks. The LP carcass reduces sidewall flex for improved stability, while the directional tread with tapered mini pins delivers smooth, predictable traction. C4 Red compound brings the extra softness needed for maximum bite in low-grip or cooler conditions. ✅ Low-profile design for reduced flex and razor-sharp response✅ C4 Red soft compound optimized for maximum traction✅ Dual mini wedge edges + radial rib for stable, consistent grip✅ Directional tread for tunable performance✅ Ideal for modern carpet and turf racing 📦 Includes:(2) Viper 2.2" Rear LP Tires(2) Black Closed Cell Inserts 💡 Pro Tip: Run C4 in colder conditions or low-grip indoor tracks to bring your setup to life.

Read more less

Pro-Motion Viper 2.2" Rear LP Carpet Pre-Mount Buggy Tires (2) — Yellow (C3 Green/Medium)Part #: 3090-C3-Y Low-Profile Speed. Carpet-Tuned Control. Engineered for precision, the Pro-Motion Viper 2.2" LP Rear Buggy Tire is built to dominate on high-traction carpet and turf tracks. With a low-profile carcass for reduced sidewall flex and quicker response, the Viper delivers unmatched stability and cornering grip. Its tapered pin tread and directional radius pattern provide predictable traction, while mini wedges and a radial rib add versatility across various conditions. ✅ Pre-mounted on yellow wheels—ready to race✅ Low-profile carcass enhances response and stability✅ Tapered mini pin design for maximum grip✅ Directional tread for fine-tuned traction control✅ Designed for 1/10 scale carpet and turf racing✅ C3 compound for medium traction balance 📦 Includes:(2) Viper LP Rear Pre-Mounted Tires(2) Foam Inserts 💡 Pro Tip: Combine with Pro-Motion Slim Front LPs for a fully dialed-in carpet setup.

Read more less

Team Associated RC10 Factory Team 1.02 Gold Shock Shafts (2)PART: 6417 These Factory Team 1.02 Gold Shock Shafts are precision replacements for the original Team Associated RC10. Engineered for smooth shock action and durability, these shafts are a direct fit and deliver race-ready performance with signature gold coating. Includes: (2) 1.02 Gold Shock Shafts Compatibility: Team Associated RC10 (Original)  

Read more less

Team Associated 7.8x3.5x0.5mm Aluminum Hub Spacer Washers – Blue (10) – Part 31387Fine-Tune Wheelbase. Maximize Setup Precision. The Team Associated 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers (31387) are perfect for adjusting wheelbase and tuning suspension geometry on vehicles with 3.5mm hinge pins. Commonly used on the RC8B3 and RC8T3 series, these lightweight spacers are also compatible with other platforms that accept 3.5mm hinge pins. ✅ Pack of 10 high-precision spacers✅ Size: 7.8mm OD x 3.5mm ID x 0.5mm thick✅ Blue anodized aluminum – lightweight and corrosion-resistant✅ Used for fine-tuning wheelbase and hub spacing✅ Compatible with RC8B3, RC8T3, and any vehicle using 3.5mm hinge pins✅ Also available in 1.0mm and 2.0mm thicknesses (sold separately) 📦 Includes: (10) 7.8x3.5x0.5mm Blue Aluminum Hub Spacer Washers Part #: 31387 💡 Pro Tip: Stack different thicknesses to get the exact rear end length or toe-in setup you're after.

Read more less

Team Associated FT 3x35mm V2 TiN Shock Shafts – ASC91623 High-Performance Titanium Nitride Shock Shafts for #91579 Upgrade your suspension system with the 3x35mm Factory Team V2 TiN Shock Shafts, designed for use with #91579 truck rear shock bodies. Featuring a durable Titanium Nitride (TiN) coating, these shafts reduce friction and wear, delivering smoother and more consistent shock performance. ⚙️ Features: ✅ TiN coating for enhanced durability and ultra-smooth operation ✅ Screw-mounted piston design for secure, reliable assembly ✅ V2 shock shaft spec for modern Team Associated platforms 📦 Includes: (2) 3x35mm V2 TiN Shock Shafts ✅ Compatibility: #91579 – Truck Rear Shock Bodies Not compatible with E-clip pistons 🏁 Trusted Factory Team engineering — made to withstand the rigors of high-performance RC racing.

Read more less

Team Associated RC10B7 Factory Team Vented Slipper Hubs – ASC92451 Consistent Performance. Cleaner Operation. Upgrade your RC10B7 with the Factory Team Vented Slipper Hubs. These precision-engineered hubs feature vented slots that help flush debris from the slipper pad assembly—ensuring smoother, more consistent slipper action during demanding runs. ⚙️ Features: ✅ Factory Team upgrade for the RC10B7 ✅ Vented design expels debris from slipper area ✅ Enhances consistency and durability of the slipper clutch ✅ Ideal for high-traction and dusty conditions 📦 Includes: (2) Vented Slipper Hubs ✅ Compatibility: • • RC10B7

Read more less

JConcepts F2 Body for XRAY XB2 2024 (Standard Weight) – Includes Two 6.5" Wings🏁 Championship-Winning Design for Carpet, Turf, and Dirt Racing The JConcepts F2 body has become a go-to choice for top-tier performance in 1/10 scale off-road buggy racing. Now available for the XRAY XB2 2024, this body delivers a tight-fitting, aggressive layout with forward cab bias and aerodynamic enhancements, ready to take on any high-grip surface. The F2 shell integrates key design elements from the IFMAR World Champion platform, including chamfered side-pods, a louvered roof, and the unmistakable Finnisher "V" profile. Built to hug the chassis for a perfect fit, the body clears the spur gear guard and leaves room for performance parts while looking sharp on the track. 🎯 Key Features: Designed specifically for the XRAY XB2 2024 platform Original JConcepts F2 styling for performance and aesthetics Clear polycarbonate – standard thickness for balanced durability and flex Tight chassis fit with clean front-end coverage Louvered roof and rear kick-up stabilizer for enhanced downforce Double-step side-pods and Finnisher-inspired cab shape Built-in clearance for the spur gear guard Includes (2) 6.5" Carpet | Turf | Dirt Wings Comes with window masks and JConcepts decal sheet 📦 Includes: (1) F2 Clear Body for XRAY XB2 2024 – Standard Weight (2) 6.5" Wings (1) Window Mask Sheet (1) JConcepts Decal Sheet ⚠️ Note: Painted body shown for display purposes only. Product ships clear and untrimmed. Compatibility: XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt

Read more less

🔋⚡ Reliable 2S LiPo Charging Made EasyThe Yeah Racing 2S LiPo XT60 Charge Lead is a pre-soldered charging cable designed to provide a simple, dependable connection between your charger and 2S LiPo batteries. Featuring a female XT60 connector, 5mm bullet connectors, and a 3-pin JST-XH balance plug, this charge lead supports safe, accurate charging while eliminating the need for custom wiring or soldering. 🔋 About the 2S LiPo Charge Lead ⚡ Ready to Use This charge lead comes fully assembled and pre-soldered, allowing you to start charging your compatible 2S LiPo batteries right out of the package. 🔌 Wide Charger Compatibility Equipped with 5mm bullet connectors, the cable is compatible with many popular RC battery chargers that use standard 5mm charging outputs. 🛡️ Safe Balance Charging The integrated 3-pin JST-XH balance connector allows your charger to properly monitor and balance each cell during charging, helping maximize battery performance and lifespan. 📏 Convenient Cable Length With an overall length of approximately 350mm, the cable provides plenty of flexibility for organizing your charging station. 🔧 Features ✔ Pre-soldered and ready to use✔ Female XT60 battery connector✔ 5mm bullet charger connectors✔ 3-pin JST-XH balance connector✔ Designed for 2S LiPo battery charging✔ Supports accurate balance charging✔ Approximately 350mm cable length✔ Durable, reliable construction 📦 Includes (1) Yeah Racing 2S LiPo XT60 Charge Lead 📊 Specifications Specification Details Battery Compatibility 2S LiPo Battery Connector XT60 Female Charger Connector 5mm Bullet Connectors Balance Connector 3-Pin JST-XH Cable Length 350mm (Approx.) 🚗 Compatibility Compatible with: 2S LiPo batteries equipped with an XT60 connector Battery chargers using 5mm bullet charging outputs Chargers with a 3-pin JST-XH balance port Always verify connector compatibility before charging. ⚠️ Notes Designed specifically for 2S LiPo battery charging. Not intended for charging batteries with different cell counts. Always use a compatible LiPo charger and follow proper LiPo charging safety procedures. Inspect charging leads regularly and replace if connectors or wiring become damaged.

Read more less

🔋⚡ High-Current Charging with Maximum Efficiency The ProTek RC 2S High Current Charge/Balance Adapter is designed for hobbyists who demand reliable, low-resistance charging performance. Built with heavy-duty 10AWG wire and gold-plated 4mm bullet connectors, this premium adapter is ideal for safely charging or discharging 2S LiPo batteries at higher current levels. The 24-inch coiled cable provides excellent reach while helping keep your charging station organized and free from tangled wires. 🔋 About the 2S High Current Charge Adapter ⚡ Built for High-Current Charging Heavy-duty 10AWG wire minimizes resistance and voltage loss, allowing efficient power transfer during high-current charging and discharging applications. 🔌 Premium Low-Resistance Connections Gold-plated 4mm solid bullet connectors provide a secure, reliable connection while reducing electrical resistance for improved charging efficiency. 🎯 Accurate Balance Charging An integrated 2S XH balance connector ensures proper cell balancing for safer charging and improved battery performance. 🛠️ Organized & Flexible Design The flexible coiled cable helps prevent tangles while providing approximately 24 inches of reach, making it easy to position your batteries during charging. 🔧 Features ✔ Heavy-duty 10AWG wire for high-current charging✔ Gold-plated 4mm solid bullet connectors✔ 2S XH balance connector for accurate balance charging✔ Compatible with chargers using 4mm bullet outputs✔ Low-resistance design for efficient power transfer✔ Flexible coiled cable helps prevent tangles✔ 24-inch cable length for added convenience✔ Ideal for charging or discharging 2S LiPo batteries 📦 Includes (1) ProTek RC 2S High Current Charge/Balance Adapter (4mm to 4mm Solid Bullets) 📊 Specifications Specification Details Battery Compatibility 2S LiPo Charge Connector 4mm Solid Bullet Balance Connector 2S XH Wire Gauge 10 AWG Cable Length 24in Version V1 🚗 Compatibility Compatible with: Chargers equipped with 4mm bullet charging outputs 2S LiPo batteries using an XH balance connector ⚠️ Notes Designed for charging and discharging 2S LiPo batteries. Verify connector compatibility with your charger and battery before use. Always follow proper LiPo charging safety procedures and never leave batteries unattended while charging.

Read more less

🔋⚡ Run Your 5mm Battery With Existing 4mm Connectors! The ProTek RC 5mm to 4mm Bullet Reducers are a simple and effective solution for racers using batteries equipped with 5mm bullet ports while maintaining 4mm bullet connectors on their ESC and charging equipment. These adapters eliminate the need to change connectors, allowing you to continue using your existing electronics and charge leads with newer battery packs. A must-have accessory for racers with mixed battery and connector setups. 🏁 About the Bullet Reducers 🔌 Simple Plug-and-Play Solution Simply insert the reducer into a battery's 5mm bullet socket to instantly create a 4mm bullet connection. ⚡ Maintain Existing Electronics Perfect for racers who: Use 5mm battery connectors Have ESCs with 4mm bullets Use charge leads with 4mm bullets No soldering or rewiring required. 🏎️ Race-Day Convenience Keep a set in your pit box to ensure compatibility between different battery and electronics setups. 🔧 Features ✔ Converts 5mm battery bullet ports to 4mm bullet ports✔ Allows use of existing 4mm ESC connectors✔ Compatible with 4mm charge leads✔ Quick and easy installation✔ No soldering required✔ Ideal for racing and hobby applications✔ Compact and lightweight design 📦 Includes (2) ProTek RC 5mm to 4mm Bullet Reducers 💡 Perfect For ✔ Competitive racers✔ Mixed battery connector setups✔ ESC compatibility upgrades✔ Battery charging applications✔ Pit box spare parts ⚠️ Notes Designed for use with batteries featuring 5mm bullet sockets Allows compatibility with standard 4mm bullet connectors

Read more less

Upgrade or replace your rear suspension with the Team Associated RC10B7.1 V2 Rear Suspension Arms. Designed for the latest B7.1 platform, these 78mm arms offer improved durability and performance, while also serving as a popular upgrade option for the original B7. ⚙️ Updated V2 Design. The V2 arms are engineered to provide: Improved durability under hard racing conditions Consistent suspension movement Reliable performance on high-bite surfaces like carpet and turf Perfect for racers pushing their cars to the limit. 🏁 Race-Ready PerformanceThese 78mm rear arms help maintain proper geometry and provide a stable rear end, giving you better confidence through corners and over jumps. ⚡ Features Genuine Team Associated replacement/upgrade part V2 updated design for improved durability 78mm rear suspension arms Smooth and consistent suspension performance Ideal for racing on carpet and turf   📦 Includes: (2) 78mm Rear Suspension Arms 🔧 Compatibility: RC10B7.1 (direct fit) RC10B7 (optional upgrade) A must-have replacement or upgrade to keep your B7 platform dialed in, durable, and race-ready.        

Read more less

🔌⚡ Clean Wiring. Reliable Signal. Low-Profile Design. The ProTek RC Flat Sensor Wire is designed to provide consistent, interference-free communication between your sensored brushless motor and ESC. With a slim, flat design, it keeps your build clean while improving wire routing in tight chassis layouts. 🏁 About This Sensor Wire 📏 Clean, Low-Profile Routing The flat cable design allows easy routing under components and through tight spaces, reducing clutter and improving overall build appearance. ⚡ Reliable Signal Transfer Engineered for consistent, interference-resistant communication, ensuring smooth motor performance in sensored brushless setups. 🎯 Perfect Fit Length At 150mm, this cable is ideal for a wide range of 1/10 scale applications and clean electronics layouts. 🔧 Key Features ✔ Low-profile flat cable design✔ Reliable signal transfer for sensored systems✔ Slim construction for easy routing✔ Helps reduce wiring clutter✔ Interference-resistant performance✔ Optimized for brushless motor/ESC communication 📦 Includes (1) Flat Sensor Wire (150mm) 📊 Specifications Length: 150mm 🧰 Recommended Use Sensored brushless motor to ESC connection Clean electronics installations Organized wiring setups  

Read more less

🏁 Clean Look. Lightweight Upgrade. Precision Fit. Upgrade your sway bar setup with this R1WURKS aluminum hardware set, designed to replace the stock components with a lightweight, blacked-out look and precise fit. 🏁 About the Sway Bar Hardware Set ⚙️ Lightweight & Durable Machined from high-strength 7075-T6 aluminum, these components offer a solid balance of durability and reduced weight. 🎯 Precision Fit CNC machining ensures accurate fitment and smooth operation, helping maintain consistent sway bar performance. 🖤 Clean, Blacked-Out Style Finished in matte black anodizing with subtle R1 laser-etched branding for a sleek, professional appearance. 🔧 Key Features ✔ 7075-T6 aluminum construction✔ Precision CNC-machined components✔ Matte black anodized finish✔ Laser-etched R1 branding✔ Lightweight sway bar balls✔ Direct replacement upgrade 📦 Includes (2) Sway Bar Bearing Collars (2) Sway Bar Balls (4) M3x3 Set Screws 🚗 Compatibility Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated RC10 B84 Team Associated RC10 B84D Team Associated RC10 B7 Team Associated RC10 B7D 🏁 Simple upgrade. Clean look. Dialed performance.  

Read more less

Restore proper chassis rigidity and suspension linkage positioning with the Team Associated RC10B7.1 Top Plate & Ballstud Mounts (92586). Designed specifically for the B7.1 buggy platform, this replacement set helps maintain consistent handling performance and precise suspension alignment. The top plate plays an important role in maintaining chassis structure, while the ballstud mounts ensure accurate suspension linkage positioning for smooth and predictable steering response. Replacing worn or damaged components helps keep your Team Associated B7.1 performing consistently during both practice and competitive racing. Ideal for routine maintenance, rebuilds, or race-day preparation, this set helps keep your buggy dialed in and ready for the track. Features• Genuine Team Associated replacement components• Helps maintain chassis rigidity and structural alignment• Ensures accurate suspension linkage positioning• Supports consistent steering and handling performance• Designed for the RC10B7.1 / B7.1 buggy platform Includes• (1) RC10B7.1 Top Plate & Ballstud Mounts Set   Features• -1° rear toe geometry adjustment for suspension tuning• Factory Team aluminum construction for strength and precision• Improves rear suspension alignment and durability• Designed for 3-gear gearbox configuration• Ideal tuning upgrade for the Team Associated B7.1 platform Includes• (1) RC10B7.1 Factory Team 3-Gear Gearbox Aluminum Arm Mount “C” Block (-1°)          

Read more less

The Team Associated RC10B7.1 Factory Team Carbon Front Suspension Arms (92575) are a premium upgrade designed to enhance front-end responsiveness and steering precision. Featuring carbon construction, these arms reduce weight while increasing stiffness, delivering a sharper and more connected steering feel for competitive racing. Engineered for seamless integration with the RC10B7.1 platform, these Factory Team components maintain consistent suspension geometry and provide the precision and durability demanded by high-level racers. Features• Increased steering precision for improved front-end response• Lightweight carbon construction reduces front-end weight• Maintains consistent suspension geometry• Factory Team performance upgrade• Direct replacement design for easy installation Includes• (1) Left RC10B7.1 Factory Team Carbon Front Suspension Arm• (1) Right RC10B7.1 Factory Team Carbon Front Suspension Arm    

Read more less

If you’re racing your Team Associated B7 on high-bite surfaces like carpet or turf, this is one of those upgrades that instantly makes sense once you try it. The Avid -2° HD C Arm Mount widens the C pivot block to properly reduce rear toe — without narrowing your track width. The result? A freer car in the corners and more predictable landings off sideways jumps and corner tabletops. 🔧 What It Does Normally, to reduce rear toe on carpet, you narrow the pills in the D mount — which decreases track width and increases side bite. That can make the car edgy. Avid solves this by: Widening the C mount Starting you at 1° rear toe with centered pills Maintaining full track width Removing 2° of rear toe properly The difference in handling is noticeable immediately. 🏁 On-Track Benefits Frees the car up in high-grip conditions More rotation in tight corners Better stability when landing sideways Maintains proper rear geometry Keeps track width intact Perfect for carpet and turf racing where fine-tuned rear grip balance is critical. 💪 HD Construction This isn’t just geometry — it’s strength too. HD version adds material to the sides Pill cutouts removed for improved impact resistance Machined from 7075-T6 aluminum Anodized black with silver chamfer highlights Laser-etched Avid logo and -2° marking for easy identification 🔧 Fitment Team Associated B7 If you're chasing that perfect carpet/turf balance and want the rear end freed up without sacrificing stability, this mount is a must-have tuning piece.

Read more less

The Team Losi Racing 22X DC Wide Steering Spindle Knuckles are genuine replacement components designed for the 22X DC 2WD buggy platform. These wide knuckles help maintain proper front-end geometry and durability while ensuring precise steering response and consistent performance on the track. Built to factory specifications, they provide a direct-fit solution for repairs or routine maintenance, keeping your 22X platform race-ready. Features Genuine TLR replacement parts Wide steering spindle design Maintains correct front-end geometry Durable construction for racing conditions Direct-fit compatibility Includes (2) Wide Steering Spindle Knuckles Compatibility Losi 22X Losi 22X-T A reliable replacement to keep your steering system tight, responsive, and competition-ready. 🏁  

Read more less

More punch. More durability. More tuning freedom. The Exotek TLR 22X Locked Spur Mount Set is a high-performance upgrade designed to reduce rotating mass while increasing drivetrain strength and responsiveness. Precision-machined from lightweight aluminum and paired with a durable titanium center bolt, this setup delivers quicker acceleration and improved throttle response — exactly what stock class racers demand. This mount allows you to easily switch between a locked spur configuration or a slipper setup, giving you instant adaptability to match track conditions. Whether you’re looking for maximum forward drive on high-bite carpet or tuning consistency on clay, this system provides the flexibility to dial in your drivetrain. Fully compatible with Exotek and Kimbrough spur gears, it mounts directly to the stock 22X top shaft for a seamless installation. Features: Lightweight aluminum construction Durable titanium center bolt Reduces rotating mass for improved acceleration Allows quick conversion between locked spur and slipper Compatible with Exotek and Kimbrough spur gears Direct mount to stock 22X top shaft Designed for competitive 22X racing Includes: (1) TLR 22X Locked Spur Mount Set w/Titanium Bolt Built for racers who want sharper throttle response, increased drivetrain durability, and the flexibility to adapt to any surface.  

Read more less

Dial in sharper handling and increased chassis rigidity with the Team Losi Racing 22X Stiffezel Side Guards. Designed for competitive racers, these upgraded side guards offer increased stiffness over stock components, improving precision and stability on high-bite surfaces. Constructed from TLR’s Stiffezel material, these guards reduce chassis flex, delivering more direct suspension response and improved consistency through high-speed corners. The added rigidity helps the car stay planted and predictable, especially on high-traction tracks where flex control becomes critical. Whether you’re fine-tuning your setup for carpet, clay, or prepared dirt, these side guards offer a proven tuning option to maximize performance. Features: Stiffer and stronger than stock side guards Reduces chassis flex for improved precision Enhances suspension response and consistency Improves control in high-speed turns Optimized for high-bite and traction-heavy surfaces Direct fit for 22X platforms Includes: (2) 22X Stiffezel Side Guards Built for racers who want sharper steering response, increased stability, and a more locked-in feel on demanding race surfaces.

Read more less

The R1WURKS 22X Series Carbon Fiber Front Shock Towers are a direct replacement for both the standard and optional front shock towers on the TLR 22X. Precision CNC-machined from high-quality carbon fiber, these towers deliver race-grade strength, consistency, and a clean professional look. Available in two premium finishes—Matte Forged and Gloss 3K Plain Weave—and in Standard, -2mm, and +2mm height options, these towers allow you to fine-tune front geometry to suit track conditions and driving style. Key Features High-strength, high-quality carbon fiber construction Precision CNC-machined for accuracy and consistency Direct replacement for stock and optional front towers Multiple height options for chassis tuning Premium cosmetic finish options Finish Options Matte Forged Gloss 3K Plain Weave 📌 Note: The forged version features a forged cosmetic surface layer only. Structural material construction is the same as the 3K plain weave versions. Options & Part Numbers Standard (ST) Height Matte Forged – 900197-F Gloss 3K Plain Weave – 900197 -2mm Height Matte Forged – 900198-F Gloss 3K Plain Weave – 900198 +2mm Height Matte Forged – 900199-F Gloss 3K Plain Weave – 900199 Includes (1) Carbon Fiber Front Shock Tower(Select desired height and finish) Fitment TLR 22X A lightweight, precise tuning upgrade that delivers strength, consistency, and pro-level looks at the front of your 22X. 🏁

Read more less

Upgrade your pit setup with the 1UP Racing Pro Pit Tray Set with Shock Stands Combo—a sleek, all-in-one workspace solution built for racers who demand organization, efficiency, and professional presentation. This complete pit system features precision-machined aluminum construction with a dual satin and gloss black finish for a high-end look. The tray is designed with the perfect depth, smooth filleted corners, and dedicated cutouts for differential outdrives, keeping parts secure and easy to access. Hidden magnets hold body clips in place and securely attach the included on-road and off-road shock stands. Both shock stands feature forged carbon trays and magnetically collapse into the included protective storage box with foam inserts, making transport clean and safe. Features Precision-machined aluminum pit tray Dual satin & gloss black finish Ideal tray depth with smooth filleted corners Hidden magnets for body clip storage Differential outdrive cutouts Includes on-road and off-road shock stands Shock stands magnetically attach to tray Forged carbon shock stand trays Protective storage box with foam insert included Includes (1) Pro Pit Tray (1) Off-Road Shock Stand (1) On-Road Shock Stand (1) Storage Box with Foam Insert A premium pit solution designed to keep your workspace organized, efficient, and race-ready—every time you wrench. 🏁  

Read more less

The Team Associated 92516 RC10B7 Rear Suspension Arms (81mm) are an optional geometry upgrade compared to the standard 78mm rear arms. While 78mm arms are the direct replacement, these 81mm arms are designed for racers looking to experiment with rear suspension geometry, stability, and tuning options. ⚠️ IMPORTANT – NOT A DIRECT BOLT-ONThese 81mm arms require additional parts to install correctly. This is not a simple swap, and is recommended for racers comfortable with setup changes. What’s Different vs 78mm Arms Longer 81mm arm length Changes rear geometry and axle position Results in a 1mm total rear width difference Requires different rear hub offset and drivetrain parts Required Parts for 81mm Conversion To run these arms properly, the following parts are required (per Team Associated supplement): RC10B7 Rear Hub Set, -4mm Offset (P/N 92518) HD CVA Bones, 71mm (P/N 92549) B74 CVA Axle, 66mm (P/N 92207) 1mm Wider Hex 1 Higher Axle Height Setting Features Genuine Team Associated option part Durable molded composite construction Designed for RC10B7 platform Allows advanced rear suspension tuning Compatibility RC10B7 with required supporting components Who This Is For Racers tuning rear grip and stability Builders experimenting with alternative geometry Not recommended as a basic replacement arm 🏁 Pro Tip: Make sure all required parts are installed together to maintain correct drivetrain alignment and handling.

Read more less

Product Overview:The Team Associated RC10B7 Factory Team Carbon Rear Hub Set (92519) is a lightweight performance upgrade designed to improve rear-end handling and response on high-grip tracks. Featuring a -4mm offset, these carbon rear hubs help fine-tune rear geometry while reducing unsprung weight for sharper, more consistent performance. Key Features: Factory Team carbon fiber rear hubs -4mm offset for improved rear geometry and handling balance Lightweight construction for reduced unsprung mass Designed for competitive 1/10 off-road racing Precision fit and finish for reliable performance Required for Installation: Team Associated #92207 RC10B74 Rear CVA Axle (66mm) (required, sold separately) Compatibility: Team Associated RC10B7 Team Associated RC10B74 Includes: (1) Pair of Factory Team Carbon Rear Hubs

Read more less