Keep your suspension dialed in with these M3x48mm steel turnbuckles from Team Associated. Designed for strength and precision, they’re a direct replacement for worn or bent camber or steering links on a variety of Team Associated vehicles. 🔥 Key Features: High-strength steel construction for durability M3 thread with a 48mm (1.89") length Ideal for use in suspension and steering linkages Precision-machined threads for secure fit and adjustability Standard AE turnbuckle design for easy setup ✅ Compatibility: RC10B6 / B6.1 / B6.2 / B6.3 series (various locations) SC6.1 / T6.1 / T6.2 May also fit other models requiring M3x48mm turnbuckles — check your manual for fitment 📦 Includes: (2) M3 x 48mm Turnbuckles (1.89") ⚠️ Note:For proper installation, use a 3mm turnbuckle wrench and thread into ballcups evenly to maintain symmetry and alignment.

Read more less

Upgrade your RC10B6.3 front-end handling with these Factory Team Steering BlockArms. Featuring a +1mm height and made from lightweight carbon fiber, these HT (High Traction) arms are designed to optimize steering feel and response in high-grip conditions. A must-have for racers looking to fine-tune their setup for maximum performance. 🔥 Key Features: Genuine Team Associated Factory Team upgrade +1mm height for increased front roll center High traction (HT) geometry improves cornering in grippy conditions Constructed from precision-cut carbon fiber Lightweight and durable for competition use ✅ Compatibility: RC10B6.3 RC10B6.3D May fit other RC10B6-series vehicles with similar front-end geometry 📦 Includes: (1) Left Steering Block Arm (1) Right Steering Block Arm ⚠️ Note:Factory Team parts are intended for experienced builders and racers. Always check fitment before installation.

Read more less

Dial in your gearing with the XRAY Composite 3-Pad Slipper Clutch Spur Gears. Precision-molded from a special composite material, these spur gears deliver durability, smooth operation, and consistent performance. Available Tooth Counts (48 Pitch): 72T – Part #365872 75T – Part #365875 78T – Part #365878 81T – Part #365881 84T – Part #365884 Features: Lightweight yet durable composite construction Designed specifically for the XRAY 3-Pad Slipper Clutch System Provides smooth power transfer and quiet operation Wide range of sizes lets you fine-tune gearing for track conditions and motor setup Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) Other XRAY models using the 3-Pad Slipper Clutch System (check your manual)      

Read more less

Boost your buggy’s performance with this high-quality Factory Team Carbon Composite Laydown Gearbox and Chassis Braces set! Designed for racers looking to increase chassis rigidity and reduce unwanted flex, this upgrade delivers improved consistency, sharper handling, and enhanced tuning potential on high-grip surfaces. ✅ Key Features: Factory Team carbon composite construction for added durability and reduced flex Improves overall chassis response and driving precision Ideal for high-grip tracks where consistency is key Direct fit for RC10B6 platform—easy bolt-on performance upgrade 📦 Includes: (1) Laydown Gearbox (Carbon Composite) (2) Chassis Braces (Carbon Composite) 🔧 Compatibility: Team Associated RC10B6 Also compatible with RC10B6.1, B6.2, B6.3, and similar laydown setups Take your tuning to the next level with Factory Team precision—perfect for racers chasing every tenth!

Read more less

Team Losi Racing Upper Shock Bushing Set (4) – TLR5092 This is a genuine Team Losi Racing Upper Shock Bushing Set, designed for the TLR 22 1/10 buggy. These bushings provide a secure, smooth mounting point for your shock assembly and help reduce unwanted flex or wear during aggressive driving. ✅ Includes: 4 upper shock bushings✅ Fits: TLR 22 series✅ Genuine TLR performance parts Keep your suspension smooth and race-ready with factory-spec replacement bushings.

Read more less

1UP Racing Blue O-Ring Grease Lubricant (3g) – 1UP120301 Maximize performance and minimize friction with 1UP Racing Blue O-Ring Grease. This 3g container of high-performance lubricant is ideal for serious racers who demand smoother suspension and leak-free differentials. Designed to reduce sliding friction, it delivers ultra-smooth shock feel and long-lasting protection for diff o-rings and seals. Features: Smooths shock operation with reduced sliding friction Ideal for diff o-rings and seals to help prevent leaks Long-lasting formula for consistent performance Perfect for serious racers and RC enthusiasts Includes: (1) 3g Container of Blue O-Ring Grease  

Read more less

1up Racing LowPro 5mm Bullet Plugs – Ultra-Low Resistance, Pro-Level Finish ⚡ Dial in your wiring setup with 1up Racing LowPro 5mm Bullet Plugs — engineered for elite-level performance and clean installs. These compact, low-profile plugs feature an oversized 6-point contact for rock-solid connections and ultra-low resistance, maximizing efficiency and power delivery. 💡 Designed with a deep solder recess and only 15mm total length, these plugs are ideal for tight spaces and lightweight builds. Perfect for all LiPo batteries with 5mm inputs. ✨ Key Features: 🔩 LowPro Design – Just 15mm long for reduced weight and a cleaner install⚡ Oversized 6-Point Contact – Ensures secure fit and minimal resistance🔥 Easy-Solder Recess – Create strong, clean solder joints with 11–16 gauge wire📦 Universal Fit – Compatible with all LiPo packs using 5mm bullet connectors🛠️ Lightweight & Efficient – Built for performance and durability 📦 What’s in the Box? ✔️ (2) 1up Racing LowPro 5mm Bullet Plugs 💡 Upgrade Your Wiring Game – Get 1up Racing LowPro Bullet Plugs Today!

Read more less

Built for serious stock-class racers, the ProTek RC 2S 150C Stock Spec 4800mAh Shorty LiPo delivers explosive punch, ultra-low internal resistance, and consistent voltage from tone to tone. Featuring advanced Si-G cell technology and a low-profile LCG shorty design, this pack keeps your car balanced, planted, and fast all the way to the last lap. If you're chasing consistency and clean power delivery in 2WD or 4WD stock racing — this is the pack. ⚡ Stock-Class Performance You Can Trust With 150C discharge capability and extremely low internal resistance, this battery provides: Strong acceleration Stable voltage under load Lower operating temperatures Improved efficiency Extended cycle life The shorty LCG form factor helps optimize chassis balance and weight placement for modern race platforms. 🏁 Designed for Stock Racing This pack is engineered specifically for stock-class competition where smooth, consistent voltage is critical. The improved efficiency and reduced heat build-up keep performance predictable and reliable throughout your main. Features 4800mAh capacity 150C high-discharge rating Low IR Si-G cell technology LCG shorty hardcase design Lighter and thinner profile Strong runtime with aggressive punch 10C maximum charge rate (1C recommended for longest life) ROAR approved Includes (1) ProTek RC 2S 4800mAh Battery (2) 5mm Bullet Connectors Specifications Nominal Voltage: 7.4V (2S) Capacity: 4800mAh Max Charge Rate: 10C (40A) Peak Discharge: 150C Cell Configuration: 2S1P Watt Hours: 35.5Wh ROAR Approved: Yes Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions: 95.3 x 46.9 x 21.2mm Weight: 190g ⚠️ Important LiPo Safety Always balance charge Use a LiPo-specific charger Never leave charging batteries unattended Do not over-discharge (minimum 3.2V per cell) Use a LiPo safe charging bag Allow pack to cool before recharging Reliable voltage. Strong punch. Championship consistency. 🏆  

Read more less

Restore strength and precision to your 22X with the Team Losi Racing Top Bridge Plate & Bulkhead Set. This genuine replacement set is designed specifically for the 22X 2WD buggy platform and is ideal for repairs, rebuilds, or keeping spares on hand. Features & Benefits: Genuine Team Losi Racing replacement components Maintains proper front-end alignment and chassis rigidity Precision-molded for correct fit and reliable performance Includes: (1) Top bridge plate (1) Bulkhead (1) Bulkhead brace Perfect for keeping your 22X dialed in and race-ready after hard racing or trackside impacts. ✅ Compatibility Losi 22X Losi 22X-T

Read more less

  The Team Losi Racing TLR-1086 AC Narrow Steering Spindle Knuckles are direct replacement components for the 22X 2WD buggy platform. Designed to factory specifications, these knuckles restore proper steering geometry and front-end durability for race or maintenance applications. Ideal for repairs, rebuilds, or keeping spares on hand for race day. 🔧 Features Genuine Team Losi Racing replacement parts AC narrow steering spindle design Precision-molded for accurate fit and alignment Direct replacement for stock components 📦 Includes (2) Narrow Steering Spindle Knuckles ✅ Compatibility Losi 22X Losi 22X-T

Read more less

Dial in your front-end feel with precision balance and smoother steering control. The R1WURKS B7 Series 10g Front Ball Stud Mount Weight is a simple drop-in upgrade that adds stability, traction, and predictability to the nose of your buggy—especially in conditions where the front end needs extra bite. Why Add Front-End Weight? Adding a small amount of mass to the front of your buggy can: Increase front-end traction Improve initial steering response Enhance mid-corner stability Reduce front-end bounce for smoother handling Help balance overall weight distribution when paired with battery placement adjustments Features High-quality brass construction Precision CNC machining Engraved for quick identification True drop-in fitment for the R1WURKS B7 ball stud mount Included (1) 10g Brass Weight (1) M2.5x8 Button Head Screw  

Read more less

Stronger. Stiffer. Smarter. Push your setup to the next level with the Factory Team Carbon V2 Caster & Steering Blocks Set, designed for the RC10T7 and RC10SC7 platforms. Crafted from Team Associated’s legendary carbon composite material, this high-performance upgrade delivers exceptional rigidity, reduced flex, and race-winning precision for serious competitors. Factory Team Engineering Developed by Team Associated’s Factory Team division, these Carbon V2 Caster & Steering Blocks are built for racers who demand consistent steering feel and maximum durability under pressure. The improved carbon design minimizes deflection for more accurate cornering response and improved high-speed stability, giving you total control lap after lap. Features: Constructed from AE carbon composite material for maximum strength and precision Increased rigidity reduces unwanted flex under load Enhanced durability for high-stress racing environments Improved handling consistency and cornering feedback Factory Team quality ensures perfect fit and race-ready reliability Includes: (1) Front Factory Team Carbon V2 Caster & Steering Blocks Set Compatibility: Team Associated RC10 SC7 Team Associated RC10 T7 Team Associated Factory Team — Engineered to Win.

Read more less

Boost your 22X’s performance and durability with this CNC-machined Aluminum Gear Differential Cover from Team Losi Racing. Designed for racers who push their cars to the limit, this cover eliminates flex, protects your diff, and helps manage heat during hard off-road runs. 🔧 Features: CNC-machined aluminum for precision fit Improves heat dissipation during high-load conditions Rigid construction reduces flex and enhances handling Long-lasting protection for your gear differential Lightweight and race-tested 📦 Includes: (1) Aluminum Gear Differential Cover (1) Gasket (1) Spacer ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

1up Racing Pro Duty Equipment Case – Built for the Track, Ready for Anything 🔧 Protect your gear like a pro with the 1up Racing Pro Duty Equipment Case – the ultimate storage solution for racers who value durability, organization, and style. Whether you're hauling tools, electronics, or spare parts, this case is engineered to keep your essentials safe and scratch-free. 💼 Featuring a rigid outer shell, dense internal padding, and six customizable dividers, this case adapts to your setup with ease. Impact-absorbing foam on the top and bottom adds next-level protection, while the internal compartments and zippered pouch keep everything neat and accessible. ✨ Key Features: 🛡️ Heavy-Duty Shell with Dense Padding – Keeps your tools, chargers, and electronics safe📦 Adjustable Dividers – 6 foam inserts for a fully customizable interior layout🧵 Durable Black Fabric Interior – Clean, professional finish inside and out🧰 4 Tool Pouches + Zippered Pocket – Store scissors, pliers, leads, setup sheets, and more🧩 Impact-Absorbing Foam (Top & Bottom) – Superior protection during transport 📏 Dimensions: Interior Space: 23 x 20 x 7.5cm\ Dividers Included:✔️ (1) 23cm Divider✔️ (2) 12.5cm Dividers✔️ (3) 6.5cm Dividers 🎯 Built to Travel. Designed to Organize. Whether you're trackside or organizing your pit area at home, the 1up Racing Pro Duty Equipment Case keeps your essentials secure, accessible, and race-ready. 💡 Organize Like a Pro – Grab Your 1up Equipment Case Today!

Read more less

Team Associated Rear CVA Axle – 66mm (RC10B74) Restore or upgrade your B74 drivetrain. The ASC92207 66mm Rear CVA Axle is a precision-engineered replacement part designed specifically for the Team Associated RC10B74. Whether you're maintaining performance or rebuilding after wear, this axle ensures smooth power delivery and durability for competitive 1/10 4WD off-road racing. ⚙️ Features: 🛞 66mm length optimized for rear CVA driveshaft assemblies 🧰 Direct replacement for factory parts 💪 Hardened for strength and longevity under racing conditions 📦 Includes: (1) 66mm Rear CVA Axle ✅ Compatibility: Team Associated RC10 B74 Keep your B74 running smooth and race-ready with genuine Team Associated drivetrain components.

Read more less

Built for competitive stock racing, the ProTek RC 2S 150C “Stock Spec” Shorty LiPo delivers consistent power, low internal resistance, and excellent efficiency from start to finish. Featuring advanced Si-Graphene cell technology, this pack provides strong punch, cooler operating temps, and reliable voltage throughout the entire run. The shorty-style design is perfect for modern 2WD and 4WD setups, offering improved weight distribution and flexibility in chassis tuning. With increased capacity and extended cycle life, this battery is a top choice for racers who demand consistent performance every lap. 🔧 Features:• 150C discharge rating for strong power and punch• Advanced Si-Graphene technology for low IR and efficiency• 5600mAh capacity for extended runtime• Shorty pack design for improved weight balance and setup options• Runs cooler with lower internal resistance• Designed for stock class racing performance• ROAR Approved for competition use 📦 Includes:• (1) ProTek RC 2S Shorty LiPo Battery• (2) 5mm Bullet Connectors ⚙️ Specifications:• Voltage: 7.4V (2S)• Capacity: 5600mAh• Discharge Rate: 150C• Max Charge Rate: 10C (56A)• Watt Hours: 41.44Wh• Connector: 5mm Bullet• Balance Plug: 2mm Bullet• Dimensions: 95.7 x 47.1 x 25.1mm• Weight: 224g (7.90oz) ⚠️ Battery Safety Notes:• Always use a LiPo-compatible charger• Balance charge only and never leave charging unattended• Do not overcharge or over-discharge (min 3.2V per cell)• Allow battery to cool before recharging• Use a LiPo safe charging bag or box For racers who need reliable power and consistent performance, the ProTek RC 150C Stock Spec Shorty LiPo delivers the voltage, efficiency, and durability to stay competitive from the first lap to the last.  

Read more less

Keep your drivetrain running smooth and protected with R1WURKS Black WS2 Grease. Specially formulated for high-performance RC applications, this grease is ideal for universal joints, dogbones, drive cups, and other high-load drivetrain components where reduced friction and long-lasting lubrication are critical. Infused with WS2 (Tungsten Disulfide) particles, this grease provides exceptional lubrication under extreme pressure while maintaining smooth performance even at elevated temperatures. ⚙️ High-Performance Drivetrain Lubrication The WS2 formula offers an extremely low coefficient of friction, helping drivetrain components operate more efficiently while reducing wear. With an impressive 300,000 PSI load-bearing capacity, it is designed to handle the heavy loads and impacts commonly experienced in RC racing and bashing. 🔧 Built for Extreme Conditions R1WURKS Black WS2 Grease is engineered to remain stable even in harsh environments. Its high dropping point allows it to stay fluid at high temperatures, preventing the grease from breaking down or solidifying during demanding runs. It also provides strong resistance against water, rust, and humidity, helping protect components from corrosion and long-term wear. ⚡ Features Designed for RC drivetrain components Ideal for dogbones, drive cups, and universal joints WS2 (Tungsten Disulfide) lubrication technology Extremely low coefficient of friction 300,000 PSI load-bearing capacity Excellent resistance to water, rust, and humidity High-temperature stability Resists abrasion and extreme pressure 📦 Includes (1) 3g Tube of R1WURKS Black WS2 Grease A must-have maintenance product for racers and builders looking to reduce drivetrain friction, protect components, and maintain peak performance.  

Read more less

The Team Associated RC10T7 and RC10SC7 Rear Suspension Arms are genuine replacement components designed to restore proper suspension performance and durability. Manufactured to factory specifications, these rear arms ensure correct geometry, strength, and consistent handling for your T7 or SC7 platform. Perfect for routine maintenance, race-day repairs, or keeping a spare set in your pit box. Features Genuine Team Associated replacement parts Factory-fit rear suspension arms Maintains proper suspension geometry Durable construction for racing conditions Includes (2) RC10T7 / RC10SC7 Rear Suspension Arms Compatibility Team Associated RC10 SC7 Team Associated RC10 T7 A dependable replacement set to keep your suspension tight, consistent, and race-ready. 🏁  

Read more less

The Team Associated Factory Team Carbon Front Suspension Arms for the RC10T7 and RC10SC7 are a high-performance upgrade designed to increase rigidity and improve suspension consistency under demanding racing conditions. Built using AE’s legendary carbon composite material, these arms reduce flex found in standard suspension components, resulting in more precise handling and predictable performance on the track. Engineered as part of the Factory Team lineup, these arms deliver race-proven strength and durability while maintaining perfect fit and compatibility with the RC10T7 and RC10SC7 platforms. Features Factory Team carbon composite construction Increased rigidity for improved suspension response Reduces flex compared to stock arms Enhances durability and strength Improves handling consistency during high-stress driving Direct-fit Factory Team upgrade Includes (2) Factory Team Carbon Front Suspension Arms Compatibility Team Associated RC10T7 Team Associated RC10SC7 A race-ready suspension upgrade designed for drivers looking for improved precision, durability, and consistency on the track. 🏁

Read more less

Upgrade your factory steering with the R1WURKS Aluminum Steering Rack, a precision-machined replacement designed to dramatically improve durability, steering precision, and on-track feel. Replacing the stock plastic component with 7075-T6 aluminum delivers tighter response and long-term reliability—without adding weight. At just 2.80 grams, this rack offers race-ready strength in a lightweight package, finished in sleek black anodizing with R1WURKS branding. Key Features Increased durability and precision over stock plastic Sharper steering response and improved feel Ultra-lightweight design: 2.80g CNC-machined from 7075-T6 aluminum Black anodized finish with R1WURKS branding Includes (1) Aluminum Steering Rack (2) 4×6×0.2mm shims Fitment B7 B7.1 B7D T7 SC7 B6.4 B6.4D SC6.4 T6.4 Disclaimer R1 Brushless Motor Lab, LLC is an independent manufacturer of aftermarket parts compatible with various RC vehicles. We are not affiliated with, sponsored by, or endorsed by Associated Electrics, Inc. All model references are used strictly for compatibility and identification purposes. Associated Electrics® is a registered trademark of Associated Electrics, Inc. A simple, effective steering upgrade for racers who want precision you can feel—lap after lap. 🏁  

Read more less

The Team Losi Racing TLR-1075 Bulkhead and Kick Shims Set is a direct replacement designed for the 22X 2WD buggy platform. This set restores proper front-end geometry and durability, making it ideal for maintenance, rebuilds, or race prep. Manufactured to exact factory specifications, this bulkhead and shim set ensures correct kick-up angle and consistent suspension alignment. 🔧 Features Genuine Team Losi Racing replacement parts Direct-fit bulkhead for 22X platforms Includes kick-up shims for proper front suspension geometry Ideal for repairs, rebuilds, or race-day spares 📦 Includes (1) Bulkhead (2) Kick-Up Shims ✅ Compatibility Losi 22X Losi 22X-T

Read more less

Fine-Tune Your Handling. Maximize Your Grip. Unlock next-level stability with the Team Associated RC10T7/RC10SC7 Rear Anti-Roll Sway Bar Set — the go-to tuning upgrade for racers who demand consistency, balance, and improved cornering on any surface. Whether you're on tight indoor carpet, loose dirt, or bumpy outdoor tracks, this sway bar set helps control chassis roll to keep your truck flatter, more predictable, and faster through every section. About the Sway Bar Set Precision Tuning Made Easy Designed specifically for the RC10T7 and RC10SC7 platforms, this rear sway bar set gives you multiple bar thicknesses to fine-tune how much the rear end stays planted.More resistance = more stability.Less resistance = more rotation.Choose the perfect feel for your track and driving style. A must-have item for racers looking to get the most out of the Team Associated 1/10 4x4 trucks. Features Three sway bar sizes for precise tuning Reduces chassis roll for improved consistency Increases cornering balance and steering predictability Works on tight, loose, and bumpy tracks Perfect for any racer’s tuning bag Direct fit for RC10SC7 and RC10T7 platforms Includes (1) Rear Sway Bar Set (multiple bar thicknesses)

Read more less

🔥 Big Power. Small Footprint.The Team Exalt 110W Digital Soldering Iron packs serious heat in a travel-friendly design. With lightning-fast heat-up, digital precision, and a built-in safety shutoff, this is your go-to soldering tool whether you’re at the track or at the bench. ⚡ Features: 110W power output for rapid heat-up Digital display with °F/°C readout Auto safety shutoff & sleep timer Ceramic heater with platinum temp sensor Plug-and-play AC design—no base station needed Compact, portable, and ready to travel 💡 Built for RC racers, builders, and field techs who demand pro-level performance in a portable package.

Read more less

💥 Cut Weight. Gain Speed. Dominate the Track.The TLR 22X Titanium Slipper Top Shaft Screw is a small upgrade that delivers a big performance edge. Precision-machined from ultra-lightweight titanium, this screw weighs about 50% less than stock—reducing rotating mass and lowering the center of gravity for sharper handling, faster acceleration, and maximum on-track control. 🔧 Key Features: Ultra-lightweight titanium construction ~50% lighter than stock screw Reduces rotating mass for quicker response Lowers CG for improved stability and cornering Precision fit and finish Built for serious racing performance 📦 Includes: (1) Titanium Slipper Top Shaft Screw ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

Unlock instant throttle response and maximum efficiency with the Team Losi Racing 22X Slipper Eliminator Plates Set — the ultimate upgrade for stock class racers aiming to shave weight and dominate on high-traction tracks. 🔧 Features: Designed specifically for stock racing applications Lightweight CNC-machined aluminum construction Hard anodized for extra strength and sleek looks Eliminates slipper assembly for direct power transfer Reduces rotating mass for quicker acceleration Rigid design ensures consistent drivetrain performance 📦 Includes: (1) Aluminum Slipper Eliminator Plates Set ⚠️ Tech Note: Not recommended for modified racing due to increased drivetrain stress. ✅ Compatibility:• Losi 22X• Losi 22X-T

Read more less

This is a Reedy Flat Sensor Wire. The flat sensor wires that are included with the Reedy Sonic motor are now available separately in a variety of lengths to suit 1/10 and 1/8 applications! The flat design looks great and provides an extremely clean look. Choose from between 70mm and 270mm lengths.

Read more less

Team Associated 13mm Rear Shock Spring (Grey/2.55lbs) (72mm) [71165] 🛞 Smoother landings. Better cornering. Upgrade your suspension game with these 13mm Rear Shock Springs from Team Associated. Designed for the T6.2 and SC6.2 when equipped with 13mm shocks, these springs deliver a plush low-speed response while still offering the support you need for big jump landings. It’s the best of both worlds—smooth over the bumps, firm on the hits. 🔥 Features:✅ Grey rate: 2.55 lbs/in✅ Length: 72mm✅ Optimized for 13mm shocks✅ Delivers soft feel with firm pack✅ Includes 2 springs 📦 Part Number: 71165🏁 Brand: Team Associated

Read more less

Commemorate Team Losi Racing’s IFMAR World Championship with the official TLR World Champion Trucker Hat. Built on the iconic Richardson 112 platform, this cap combines premium comfort, durability, and classic trucker styling that has made it one of the most popular hats in the USA. Known for its quality construction and timeless fit, the Richardson 112 features a structured front panel and breathable mesh back, making it perfect for race days, shop time, or everyday wear. With championship-inspired TLR branding, this hat lets you represent winning heritage wherever you go. Features Official TLR World Championship commemorative design Richardson 112 premium trucker cap Structured front with breathable mesh back Classic mid-profile fit Adjustable snapback closure Durable, high-quality construction A clean, race-inspired look that celebrates TLR’s championship legacy while delivering everyday comfort and style. 🏁  

Read more less

Sharpen Your Steering. Increase Stability. Go Faster. Dial in front-end precision with the Team Associated RC10T7/RC10SC7 Front Anti-Roll Sway Bar Set — a must-have tuning upgrade for racers looking to reduce chassis roll, increase steering consistency, and fine-tune handling for any surface. Whether you're running high-grip carpet, loose dirt, or rough outdoor terrain, this sway bar set helps keep the front of your truck planted and predictable where it matters most. About the Sway Bar Set Versatile Tuning for Any Track The Front Anti-Roll Sway Bar Set gives you multiple bar thickness options so you can tailor front-end stability to match your track conditions and driving style. ✔ Thicker bar = more stability, smoother steering✔ Thinner bar = more steering rotation This lets you quickly tune steering response, reduce traction rolling, and achieve a balanced, confidence-inspiring setup. Features Three sway bar sizes for fine-tuned handling Reduces chassis roll for improved front-end consistency Boosts steering stability on tight, loose, or bumpy tracks A must-have in any race-day tuning kit Direct fit for RC10SC7 and RC10T7 platforms Includes (1) Front Anti-Roll Sway Bar Set (multiple bar thicknesses)

Read more less

Charge Clean. Charge Confident. Upgrade your charging setup with the Team Exalt ProCharge 2S Specialized Charging Cable, designed for precision, durability, and a professional look at your pit station. Built for Junsi iCharger 456/458 Duo chargers, this premium cable ensures a clean, secure, and efficient charge for your 2S LiPo batteries. Professional-Grade Construction Each ProCharge cable is meticulously assembled with 12AWG charge leads and 18AWG balance leads, paired with high-quality XT90 and 5mm bullet connectors for consistent, low-resistance power delivery. A custom braided PET sleeve and self-sealing shrink tubing keep everything neat, organized, and protected from wear. Features: Custom-built 2S ProCharge cable for Junsi iCharger 456/458 Duo XT90 charger connector with 5mm battery bullets 12AWG main leads and 18AWG balance leads for reliable current flow 2mm balance plug to 3-pin XH connector Braided PET sleeve for a clean, professional finish Self-sealing shrink tube ensures durability and neat cable management Reduces pit clutter and promotes safe, organized charging Specifications: Spec Detail Charger Connector XT90 Battery Connector 5mm Bullet Balance Connector 2mm to 3-pin XH Main Leads 12AWG Balance Leads 18AWG Includes: (1) Team Exalt ProCharge 2S Specialized Charging Cable Team Exalt — Professional Power. Cleaner Charging.

Read more less

Precision Fit. Proven Strength. Upgrade your suspension geometry with the Team Associated Factory Team Aluminum 3-Gear Gearbox Arm Mount “C” Block. Designed for the RC10B7, B7D, T7, and SC7 platforms, this CNC-machined aluminum mount provides superior strength, precise alignment, and long-lasting durability under the toughest racing conditions. Factory-Grade Performance Engineered to maintain suspension integrity and reduce flex, this aluminum “C” block ensures consistent handling through high-speed corners and rough landings. Whether you’re chasing podiums or fine-tuning setup precision, this component delivers the reliability and performance serious racers expect from Team Associated. Features: CNC-machined aluminum construction for maximum rigidity and precision fit Designed for 3-gear gearbox setups Improves consistency and handling through rough terrain Factory Team engineering for professional-grade reliability Direct replacement for stock “C” block Includes: (1) Aluminum 3-Gear Gearbox Arm Mount “C” Block Compatibility: Team Associated RC10 B7 Team Associated RC10 B7D Team Associated RC10 T7 Team Associated RC10 SC7 Team Associated Factory Team — Engineered to Win.

Read more less

Experience uncompromising power and consistency with the Gens Ace Redline 2.0 2S Shorty LiHV Battery. Designed for high-performance racing, this pack delivers exceptional punch, low internal resistance, and stable voltage from start to finish. Perfect for 1/10 scale off-road, on-road, and touring applications where balance and efficiency are critical. 🔥 Key Features: High Voltage (LiHV) 7.6V design for increased power output 140C discharge rate for explosive acceleration and sustained punch 5300mAh capacity delivers both power and endurance Factory cell matching ensures maximum performance and consistency Low internal resistance (IR) for stable voltage under load Compact shorty pack size for ideal chassis weight distribution 5mm bullet connectors for secure, low-resistance connections Built with stable automatic stacking technology and strict cell matching Lightweight and low-profile design for racing efficiency 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 5300mAh Continuous Discharge: 140C Charge Rate: 1C (5.3A max recommended) Configuration: 2S2P Watt Hours: 40.28Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 96 × 47 × 22.5mm Weight: 7.02oz (199g) ✅ Compatibility: Ideal for 1/10 scale off-road and on-road racing Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher chassis setups Compatible with Touring Car (TC6/TC7) platforms and other vehicles using 2S shorty packs 📦 Includes: (1) Gens Ace Redline 2.0 2S Shorty LiHV 5300mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always use a LiPo-compatible charger — never charge unattended. Always balance charge and use a LiPo Safe charging bag. Do not overcharge, over-discharge, or store above 35°C. Allow battery to cool before recharging after use. For best cycle life: charge fully before first use and discharge only 50% for first 5 cycles. 🏎️ Recommended For: 1/10 Scale Buggy, Stadium Truck, Short Course Truck, and Touring Car racing Perfect balance of voltage, runtime, and punch for both spec and modified classes

Read more less

Keep your suspension tight and precise with the XRAY Suspension Pivot Pins. Manufactured from premium hardened steel, these pins are designed for maximum strength and long life while maintaining smooth suspension movement. Features: Precision-ground hardened steel construction Ensures smooth, slop-free suspension arm movement Designed to withstand the demands of racing Easy drop-in replacement part Includes: (2) Suspension Pivot Pins Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) XRAY XB4 (4WD Buggy) Other XRAY vehicles using this pivot pin size (check manual for exact fit)

Read more less

Dial in the perfect rear suspension setup with the XRAY 57.5mm Big Bore Rear Conical Spring Set. These precision-engineered springs are designed for XRAY big-bore rear shocks, giving you the flexibility to tune your buggy or stadium truck’s handling to match any track condition. Each spring is color-dot coded from soft (1-Dot) to stiff (5-Dot) for quick identification. Features: Set includes (2) precision-made conical rear springs 57.5mm length, built for XRAY big-bore rear shocks Dot-coded system for easy rate identification Softer springs provide more traction and bump absorption Stiffer springs increase stability and sharpen handling response Spring Rates (Softest → Hardest): 1-Dot – Part #368481 2-Dot – Part #368482 3-Dot – Part #368483 4-Dot – Part #368484 5-Dot – Part #368485 Effects of Shock Spring Changes: Softer: More chassis roll, more rear traction, better bump compliance, but more bottoming out. Stiffer: Less chassis roll, reduced rear traction, quicker response, more stability in high grip. Compatibility: XRAY XB2 – 1/10 2WD Buggy (Rear) XRAY XT2 – 1/10 Stadium Truck (Rear) Other XRAY 57.5mm big-bore rear shock applications (check manual for confirmation).

Read more less