Gens Ace 2S 850mAh 60C LiPo Battery – EC2 Connector Compact Power for Your Mini Racer Upgrade your Losi Mini-B or other 1/16–1/18 scale RC vehicles with the dependable punch of the Gens Ace 2S 850mAh 60C LiPo Battery. Engineered with precision cell matching and low internal resistance, this pack delivers stable voltage, excellent throttle response, and long-lasting performance in a compact footprint. ⚙️ Features: ✅ 7.4V 2S / 850mAh Capacity ⚡ 60C Continuous Discharge – responsive performance for your mini vehicle 🔌 EC2 Connector – perfect fit for Losi Mini-B 🔋 Factory-matched cells for consistent output and reliability 🧊 Low IR design ensures cooler, more efficient operation 📐 Specifications: Voltage: 7.4V (2S) Capacity: 850mAh Continuous Discharge Rate: 60C Max Charge Rate: 1C (0.85A) Cell Configuration: 2S1P Watt Hours: 6.29Wh Connector: EC2 Balance Plug: XH Dimensions: 58 x 32 x 20mm Weight: 57g (2.01oz) 🔧 Reliable, lightweight, and built to deliver — the Gens Ace 850mAh LiPo is the go-to upgrade for your Losi Mini-B, Losi Mini-T, Losi Mini LMT and other compact RC platforms.

Read more less

🔋 Power your transmitter with rock-solid reliability! The Gens Ace 3800mAh 2S LiPo Transmitter Battery delivers long-lasting, consistent performance for RC pilots and drivers who demand the best. Built with precision cell matching and low internal resistance, this pack ensures stable voltage and extended run times, keeping your transmitter powered for hours. Key Features: 2S (7.4V) LiPo pack with 3800mAh capacity for extended use JST connector for wide compatibility with RC transmitters Low internal resistance for consistent voltage output Factory-matched cells for superior reliability Lightweight and compact for easy fit in most radios Specifications: Voltage: 7.4V Cell Count: 2S1P Capacity: 3800mAh Dimensions: 70 × 52 × 18mm Weight: 133g Connector Type: JST Perfect for replacing NiMH packs or upgrading to LiPo efficiency, this battery gives you more time in control and less time worrying about recharging.

Read more less

Gens Ace 3S 7000mAh 60C LiPo Battery – T-Style Connector Big Power. Long Run Times. Proven Performance. The Gens Ace 3S 7000mAh 60C LiPo is built for enthusiasts who demand long run times and powerful, consistent performance. Engineered with low internal resistance and high-quality matched cells, this pack delivers stable voltage throughout your entire run. Whether you're bashing, racing, or scaling, this high-capacity battery is a perfect match for high-demand 1/8 scale vehicles and more. The T-Style connector offers secure compatibility with many popular RC platforms. ⚙️ Features: 🔋 7000mAh Capacity – Extended runtime for fewer pit stops ⚡ 60C Continuous Discharge – Delivers steady, high-power output 🔌 T-Style Connector – Widely compatible and reliable connection 🔧 Factory Matched Cells – Built for performance and consistency 🧊 Low Internal Resistance – Enhances efficiency and reduces heat 📦 Robust Hardcase Design – Protects battery from physical damage 📐 Specifications: Voltage: 11.1V (3S) Capacity: 7000mAh Continuous Discharge: 60C Burst Discharge: 120C Max Charge Rate: 1C (7A) Cell Configuration: 3S1P Watt Hours: 77.7Wh Connector: T-Style Balance Plug: XHR Dimensions: 5.47 x 1.85 x 1.57 in (139 x 47 x 40 mm) Weight: 16.01 oz (454g) ROAR Approved: No ⚠️ Safety First: Always charge with a LiPo-compatible charger in a LiPo-safe bag. Monitor battery voltage and temperature during use. Power up with Gens Ace – reliable performance, built-in confidence.

Read more less

Gens Ace G-Tech 4S 10000mAh 100C Smart LiPo Battery (14.8V) Smart Power. Extreme Performance. Trusted Worldwide. Step up your power game with the Gens Ace G-Tech Smart 4S LiPo Battery. Built for serious RC drivers demanding unmatched punch and runtime, this battery combines smart charging protection with brute force output. With a 10000mAh capacity and 100C continuous discharge, it's ideal for large-scale vehicles that require serious amps. ⚙️ Features: ✅ 100C Continuous / 200C Peak Discharge 🔋 10000mAh Capacity for long-lasting performance 🔌 EC5 Connector for high-current delivery 🧠 G-Tech Smart System auto-adjusts charging for added safety 🔒 Integrated chip and smart balance plug extend battery life 📦 Sturdy hardcase design for secure fit and protection 📉 Low internal resistance for consistent voltage output 📐 Specifications: Voltage: 14.8V (4S2P) Capacity: 10000mAh Max Charge Rate: 5C (50A) Watt Hours: 148Wh Connector Type: EC5 Balance Plug: G-Tech Smart Dimensions: 178.5 x 53.6 x 51.6mm Weight: 984g (34.71oz) ROAR Approved: ❌ No 💥 Perfect for 1/5 scale bashers, monster trucks, and high-power platforms where runtime and punch matter most.Plug in, power up, and let Gens Ace Smart Technology handle the rest.

Read more less

Power your RC machine with smart performance! The Gens Ace G-Tech 3S 5300mAh LiPo delivers consistent voltage, low internal resistance, and intelligent G-Tech technology that takes charging safety and battery health to the next level. With a 60C continuous discharge rate (100C burst), this pack is perfect for high-demand applications. Built with advanced cell matching and balance plug chip technology, this pack offers unmatched reliability and efficiency on the track or in the field. Smart G-Tech Features: Auto-detects and adjusts charge settings for optimal safety Built-in chip for real-time battery parameter recognition Helps extend battery life and ensures safe, accurate charging Battery Specs: Voltage: 11.1V (3S) Capacity: 5300mAh Discharge Rate: 60C (Burst: 100C) Charge Rate: Up to 5C (26.5A max) Configuration: 3S1P Watt Hours: 58.83Wh Connector: EC5 Balance Plug: G-Tech Smart Dimensions: 5.47 x 1.81 x 1.52 in (139 x 46 x 38.5mm) Weight: 14.14oz (401g) ROAR Approved: No Whether you're bashing, racing, or crawling—this is the smart LiPo upgrade your rig deserves.

Read more less

Gens Ace G-Tech Smart 4S 5000mAh 45C LiPo Battery – EC5 Connector Reliable Power Meets Smart Tech The Gens Ace G-Tech 4S 5000mAh 45C Smart LiPo delivers dependable, race-ready performance with intelligent battery management. Designed with G-Tech Smart technology, this pack automatically communicates vital information to compatible chargers—improving safety, efficiency, and battery life. Built with high-quality matched cells and low internal resistance, this 14.8V pack offers consistent power output and robust durability for demanding RC applications. It’s a perfect match for bashers, racers, and surface vehicles needing 4S power and EC5 compatibility. ⚙️ Features: ⚡ 45C Continuous Discharge – Reliable, punchy power delivery 🧠 G-Tech Smart Chip – Automatically sets and tracks charge parameters 🔌 Built-In Smart Balance Connector – Streamlined, protected plug design 🔋 High Capacity (5000mAh) – Ideal for longer run times and stable output 🧱 Factory-Matched Cells – Consistent performance and longer cycle life 💡 Low IR Design – Enhances voltage stability under load 📐 Specifications: Voltage: 14.8V (4S) Capacity: 5000mAh Discharge Rate: 45C Continuous Max Charge Rate: 5C (25A) Configuration: 4S1P Connector Type: EC5 Balance Plug: G-Tech Smart Dimensions: 6.14 x 1.85 x 1.18 in (156 x 47 x 30 mm) Weight: 16.51 oz (468g) Watt Hours: 74Wh ROAR Approved: No ⚠️ Charging Note: Always charge in a LiPo-safe environment using a LiPo-compatible charger. G-Tech Smart features require a compatible Gens Ace G-Tech charger for full functionality. Upgrade your rig with dependable power and next-gen safety—Gens Ace G-Tech delivers performance you can trust.

Read more less

Gens Ace G-Tech Smart LiPo Battery Reliable Power, Intelligent Charging Gens Ace G-Tech Smart Batteries are trusted by RC enthusiasts for their outstanding performance, tight cell matching, and intelligent charging technology. Featuring advanced internal chip technology, these batteries automatically identify charge parameters and help extend pack life—ideal for racers, bashers, and everyday hobbyists who demand consistency and safety. ⚙️ Features: 📊 G-Tech Smart Chip – Automatically records and identifies battery parameters 🔒 Safer Charging – Automatically adjusts settings to optimize safety ⚙️ Patented Balance Plug Design – Enhances performance and battery protection 🔁 Consistent Cell Matching – Ensures reliable output and long-term performance 🔥 Low Internal Resistance – Delivers stable voltage throughout the run ⚠️ Important LiPo Safety Guidelines: 🚫 Never charge batteries unattended 🔋 Always use a LiPo-compatible charger & balance charge 🔥 Always use a LiPo Safe Bag or Box when charging 📉 Do not over-discharge or exceed 80% of rated capacity ❄️ Let hot batteries cool for 20+ minutes before recharging Whether you're racing at the track or crawling over rocks, Gens Ace G-Tech Smart Batteries deliver dependable, intelligent power you can count on.

Read more less

🏁 Give your pit space a professional upgrade with the Gens Ace Pit Mat—designed for racers and hobbyists who demand both functionality and flair. With its non-slip rubber base, ultra-thin portability, and vivid custom printing, this mat protects your workspace while leveling up your setup. 🛠️ Key Features: Non-slip rubber base keeps your mat secure on any surface Lightweight and rollable—take it anywhere, anytime Durable thick foam construction offers long-lasting protection Eye-catching high-definition printed design Generous size: 47.24" x 23.62" gives you plenty of room to work Easy to clean and store—perfect for the shop or the track 📦 Includes:(1) Gens Ace Pit Mat (47.24" x 23.62") 💥 Stay clean, stay pro. Make your workspace race-day ready with Gens Ace.  

Read more less

Unleash extreme power and efficiency with the Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery. Engineered for competitive RC racing, this pack combines massive capacity, ultra-low internal resistance, and a high 140C discharge rate to deliver stable voltage, explosive acceleration, and unmatched endurance. Perfect for racers who demand consistent performance through the entire run. 🔥 Key Features: High Voltage (LiHV) 7.6V output for maximum speed and power 140C continuous discharge for exceptional punch and consistency 8500mAh capacity delivers long runtime and balanced weight Factory-matched cells for uniform voltage, capacity, and resistance Low IR design ensures stable voltage under heavy load 5mm bullet connectors provide secure, low-loss connections Built using stable automatic stacking technology for reliability Lightweight and low-profile design for chassis balance and fit 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 8500mAh Continuous Discharge: 140C Charge Rate: 1C (8.5A max recommended) Configuration: 2S1P Watt Hours: 64.4Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 139 × 47 × 25mm Weight: 10.65oz (302g) ✅ Compatibility: Ideal for 1/10 & 1/8 scale surface applications Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher racing platforms Works with Touring Car (TC6/TC7 series), 4WD Buggies, Truggies, and Short Course Trucks requiring 2S packs 📦 Includes: (1) Gens Ace Redline 2.0 2S LiHV 8500mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always balance charge using a LiPo-compatible charger and LiPo safe bag. Never leave charging batteries unattended. Do not overcharge or discharge below 3.2V per cell. Allow batteries to cool completely before recharging. Follow proper break-in procedure for new packs (first 5 cycles at 50% discharge). 🏎️ Recommended For: 1/10 & 1/8 scale Buggy, Truggy, Touring Car, and Short Course Truck racing Ideal for spec and modified classes needing high voltage and long runtime

Read more less

Experience uncompromising power and consistency with the Gens Ace Redline 2.0 2S Shorty LiHV Battery. Designed for high-performance racing, this pack delivers exceptional punch, low internal resistance, and stable voltage from start to finish. Perfect for 1/10 scale off-road, on-road, and touring applications where balance and efficiency are critical. 🔥 Key Features: High Voltage (LiHV) 7.6V design for increased power output 140C discharge rate for explosive acceleration and sustained punch 5300mAh capacity delivers both power and endurance Factory cell matching ensures maximum performance and consistency Low internal resistance (IR) for stable voltage under load Compact shorty pack size for ideal chassis weight distribution 5mm bullet connectors for secure, low-resistance connections Built with stable automatic stacking technology and strict cell matching Lightweight and low-profile design for racing efficiency 📐 Specifications: Nominal Voltage: 7.6V (2S LiHV) Capacity: 5300mAh Continuous Discharge: 140C Charge Rate: 1C (5.3A max recommended) Configuration: 2S2P Watt Hours: 40.28Wh Battery Connector: 5mm Bullet Balance Connector: 2mm Bullet Dimensions (L×W×H): 96 × 47 × 22.5mm Weight: 7.02oz (199g) ✅ Compatibility: Ideal for 1/10 scale off-road and on-road racing Perfect for Team Associated, XRAY, TLR, Yokomo, and Schumacher chassis setups Compatible with Touring Car (TC6/TC7) platforms and other vehicles using 2S shorty packs 📦 Includes: (1) Gens Ace Redline 2.0 2S Shorty LiHV 5300mAh 140C Battery (1) Set of 5mm Bullet Connectors ⚠️ Important Safety Information: Always use a LiPo-compatible charger — never charge unattended. Always balance charge and use a LiPo Safe charging bag. Do not overcharge, over-discharge, or store above 35°C. Allow battery to cool before recharging after use. For best cycle life: charge fully before first use and discharge only 50% for first 5 cycles. 🏎️ Recommended For: 1/10 Scale Buggy, Stadium Truck, Short Course Truck, and Touring Car racing Perfect balance of voltage, runtime, and punch for both spec and modified classes

Read more less

Gens Ace Redline 2.0 4S LiHV Battery 140C (15.2V/6300mAh) w/5.0mm Bullet Part Number: GEA6300140P4S5B Deliver elite-level performance with the Gens Ace Redline 2.0 4S LiHV 140C Battery. Designed for serious racers, this high-discharge LiHV pack offers incredible punch, stable voltage output, and a lightweight footprint to maximize efficiency and speed on the track. ✅ Features: ⚡ 140C high discharge rate for extreme power delivery 🔋 15.2V LiHV (High Voltage) design for improved performance over standard LiPo 🧩 Factory-matched cells ensure optimal voltage, resistance, and capacity consistency 🧱 Low-profile, compact design for better weight distribution 🧊 Low internal resistance for stable output and long cycle life 🔌 5.0mm bullets for power, 2.0mm bullets for balancing ⚠️ LiPo Safety Notice: Always use a LiPo-specific charger Never charge unattended or above recommended voltage Always balance charge and store in a LiPo safe bag/box Do not over-discharge (keep cell voltage above 3.2V) Let the pack cool before recharging 📦 Includes: (1) Gens Ace Redline 2.0 4S LiHV 140C 6300mAh Battery (5.0mm bullet-style main connector & 2.0mm balance port 📐 Specifications: Voltage: 15.2V (4S LiHV) Capacity: 6300mAh Discharge Rate: 140C Continuous Charge Rate: 1C (6.3A Max) Cell Configuration: 4S1P Connector: 5.0mm Bullet (Main), 2.0mm Bullet (Balance) Dimensions: 5.47 x 1.8 x 1.45 in (139 x 47 x 37 mm) Weight: 15.9 oz (452g) Watt Hours: 95.76Wh Unleash race-ready performance with the Gens Ace Redline 2.0 — the choice of champions.

Read more less

  Easily connect batteries and electronics with different plug types using the Gens Ace XT60 Male to Deans (T) Female Adapter Cable. Perfect for racers and bashers who want quick compatibility without rewiring. Features: XT60 Male to Deans (T) Female adapter for versatile connectivity High-quality construction for safe, efficient power transfer Compact design for easy use in tight spaces No soldering required — plug-and-play convenience A handy tool for your RC pit box to keep you running, no matter what connectors you’re working with.

Read more less

HackFab Losi Mini-B Bolt-On Sprint Car Cage (Black) – HFB02046BK Convert your Losi Mini-B into a full-fledged sprint car with the HackFab Bolt-On Sprint Car Cage. Designed for easy installation, this cage bolts directly to your stock aluminum chassis and pairs perfectly with the HackFab Sprint Car Lexan Body Kit (HFB02045 – sold separately). Featuring a unique hinge system for quick access and durable 3D-printed mounts, this kit is built for racers who want authentic style and easy maintenance. Features: Direct bolt-on fit for Losi Mini-B aluminum chassis Designed to work with HackFab Sprint Car Lexan Body (HFB02045) Innovative hinge system for quick access to internals Includes durable 3D printed mounts Includes: (1) Sprint Car Cage Kit (1) 1" Body Post All necessary mounting hardware

Read more less

HackFab Losi Mini-B Bolt-On Sprint Car Lexan Body Kit (Clear) – HFB02046BK Upgrade your Losi Mini-B into a dirt oval contender with the HackFab Sprint Car Lexan Body Kit. This pre-trimmed, clear Lexan body is designed to bolt directly onto the HackFab Sprint Car Cage (HFB02046BK - sold separately), eliminating the hassle of custom cutting and bending. It's lightweight, high-quality, and ready for your custom paint job! Features: Designed specifically for Losi Mini-B with HackFab Sprint Car cage High-quality clear Lexan Pre-trimmed, bent, and ready to assemble Includes lightweight composite mounting hardware Includes: (1) Clear Lexan body (pre-trimmed and bent) Mounting hardware Notes: Headers (HFB02044M) not included Painted body shown for reference only – yours will arrive clear and unpainted

Read more less

🏁 Dominate the Corners with Added Rear Grip The HackFab Brass Rear Hub is a game-changing upgrade for Losi Mini-T 2.0 and Mini-B racers. Designed with oval racing in mind, this heavy-duty brass hub adds 23.57 grams of unsprung weight to keep your left rear planted through high-speed corners. Built with extra material and “ears” for max mass, it’s the perfect performance booster for high-bite tracks. ⚙️ Features: Adds weight where it counts: +23.57g of unsprung mass Drop-hub design for enhanced adjustability Improves drive-off and cornering stability Ideal for high-traction oval racing 📦 Includes: (1) Brass Rear Hub 🔧 Compatibility: Losi Mini-B Losi Mini-T 2.0Note: Not compatible with TLR Mini-B CVAs (larger inner bearing). May require shimming when used with MIP axles.

Read more less

🛠️ Tiny but mighty! Keep your CR-24 mini crawler steering smooth and precise with the HobbyPlus 1KG Servo – a direct replacement designed specifically for your CR-24 rig. Whether you're upgrading a worn-out unit or building a custom micro crawler, this servo delivers reliable performance in a compact package. ✅ Direct fit for HobbyPlus CR-24 mini crawlers✅ Includes servo horn & mounting hardware✅ Simple plug-and-play replacement 📦 Includes:• (1) 1KG Servo• (1) Servo Horn• Mounting Hardware Perfect for getting your micro rig back on the rocks fast!  

Read more less

💥 Power, Precision & Protection – Built for Beast ModeThe Hobbywing EZRun MAX10 G2 is a powerhouse ESC engineered for serious 1/10 scale 4X4 trucks and monster trucks. Featuring sensored brushless control, IP67 waterproofing, and smart turbo timing, this ESC delivers unstoppable torque and smooth throttle response even in the toughest environments. 🔧 Features: 140A Continuous / 880A Burst Current Fully waterproof (IP67 rated) Compatible with both sensored & sensorless motors Supports turbo timing up to 32° Frameless smart fan design for quiet cooling 74% more capacitance vs. previous gen for better power flow Smart freewheeling tech for lower temps & higher efficiency Real-time data monitoring via OTA module (sold separately) 📊 Specifications: Input Voltage: 2S–4S LiPo BEC: 6V/7.4V @ 5A (Switch-mode) Motor Limit: 3S: <4000Kv (3665 size) 4S: <2600Kv (4268 size) Dimensions: 53 x 39.5 x 37.2mm Weight: 120g (with wires) Application: 1/10 4WD SCT, Monster Trucks, etc. 📦 Includes: (1) EZRun MAX10 G2 140A Brushless ESC User Manual Hobbywing Decal Sheet 🚀 Pair it with the Hobbywing 3665 G3 motor for up to 25% more speed and unmatched responsiveness. Dominate the track or the trail with confidence!

Read more less

🔥 Smaller Package. Big-Time Performance.The Hobbywing EZRun MAX10 G2 80A ESC is the perfect blend of power, precision, and protection for 1/10 on-road cars, buggies, lightweight SCTs, and trucks. Built with smart sensored brushless tech, this ESC delivers buttery smooth throttle response and a huge performance boost—up to 25% more speed when paired with the Hobbywing 3652 G3 motor! 🧠 Packed with Features: 80A continuous / 520A burst current IP64-rated waterproofing Supports turbo timing up to 32° Smart fan control (fan runs only when needed) 74% more capacitor capacity than previous MAX10 Overheat protection & smart freewheeling for efficiency Real-time data monitoring and data logging (with optional OTA module) 📏 Specifications: Battery Input: 2S–3S LiPo BEC: 6V/7.4V @ 5A (Switch-mode) Motor Limit: 2S: <6000Kv 3S: <4200Kv (3652 size motor) Dimensions: 53 x 39.5 x 37.2mm Weight: 120g (w/ wires) Application: 1/10 On-Road, Buggy, Light SCT, Monster Truck Cooling Fan: Included, BEC powered 📦 Includes: (1) EZRun MAX10 G2 80A ESC Hobbywing Decal User Manual ⚙️ Need control and cool temps on your 2S/3S setup?The MAX10 G2 80A delivers elite performance with smart tech to back it. Race harder, run cooler, and go faster—without compromise.

Read more less

⚙️ Precision Aluminum Spur Gear Upgrade for Traxxas 2WDTake your Traxxas performance to the next level with the Hot Racing 48 Pitch Hard Anodized Aluminum Spur Gear (90T). Designed for speed enthusiasts and precision builders, this CNC-machined aluminum gear provides smoother power transfer, reduced flex, and improved efficiency compared to the stock nylon spur gear. 🔩 About the Spur Gear Crafted from 6061-T6 aluminum, this gear is hard-anodized in a sleek light gunmetal finish for enhanced strength and wear resistance. The included silver anodized countersunk washers and high-strength hardware ensure a secure and professional-grade installation. Perfect for high-RPM setups and consistent gear mesh, this upgrade provides durability without sacrificing performance. 🌟 Features CNC-machined 6061-T6 aluminum for high precision and strength Hard-anodized gunmetal finish resists corrosion and wear Direct replacement for the stock nylon spur gear Silver anodized washers and mounting hardware included 48 pitch gearing with a 90-tooth configuration Ideal for smooth, efficient, high-speed performance 📏 Specifications Pitch: 48P Tooth Count: 90T Mounting Holes: 3 Tooth Face Width: ~5mm 📦 Includes (1) 48 Pitch Aluminum Spur Gear (90T) (3) Mounting Screws (3) Silver Anodized Countersunk Washers (3) Flat Washers (for optional spacing) ⚠️ Notes Aluminum gears prioritize speed and precision over maximum durability. Do not overtighten the slipper clutch — excessive tension may cause gear failure. Recommended motor temps: below 160°F, ESC below 160°F. For added motor security, use Hot Racing HRATE18L06 motor lock plate. Always check gear alignment before running. 🚗 Compatibility Traxxas Bandit Traxxas Rustler 2WD Traxxas Slash 2WD Traxxas Stampede 2WD 🏁 Built for precision, performance, and durability — the Hot Racing 90T aluminum spur gear keeps your Traxxas running smooth, fast, and reliable.

Read more less

🔧 Precision. Strength. Style. Upgrade your steering setup with the Hot Racing Aluminum Servo Horn, designed for the Traxxas TRX-4 and TRX-6. CNC-machined from aluminum and finished in anodized blue, this single-arm servo horn provides greater strength and precision over the stock part, while adding a custom look to your rig. ✅ Fits 25T spline servos – Traxxas, ProTek, Futaba, Savox, and more✅ CNC-machined aluminum for durability✅ Anodized blue finish for style✅ M3 diameter linkage holes✅ Direct replacement for Traxxas part TRA8247✅ Vehicle Compatibility: • Traxxas TRX-4 • Traxxas TRX-6 📦 Includes:• (1) Aluminum Servo Horn – 25T (Blue)

Read more less

⚡ Hot Racing Arrma Granite Grom Aluminum Front Lower Arm Set (Black) ⚡💪 Unmatched Strength & Stability for Your Grom! 💪 Take your Arrma Granite Grom to the next level with the Hot Racing Aluminum Front Lower Arm Set! Built for hardcore bashers, these CNC-machined aluminum arms add serious strength, stability, and style to your 1/18 4WD Monster Truck. 🏆💥 Tackle rough terrain and massive jumps with confidence. The anodized black finish not only gives your rig a sleek, aggressive look but also offers corrosion resistance for all-weather durability. 🌧️☀️ ✅ Key Features: ✨ High-Quality Aluminum Construction – Stronger & tougher than stock🛠️ Enhanced Durability & Rigidity – For superior handling & control⚡ Anodized Finish – Corrosion-resistant with a sleek, pro look🔩 Precision-Engineered Fit – Easy installation & perfect alignment🔧 Pre-Installed Steel Pivot Balls & Mounting Screws – Ready to bash! 📦 Includes: ✔️ (1) Left Front Lower Arm✔️ (1) Right Front Lower Arm✔️ (2) Pre-Installed Steel Pivot Balls✔️ (2) Mounting Screws 🔗 Compatibility: 🔸 Arrma Granite Grom

Read more less

⚡ Hot Racing Arrma Granite Grom Aluminum Front Upper Arm Set (Black) ⚡💪 Stronger, Sleeker, and Built to Perform! 💪 Upgrade your Arrma Granite Grom with the Hot Racing Aluminum Front Upper Arm Set! Engineered for strength, precision, and style, these CNC-machined aluminum arms bring next-level durability and performance to your 1/18 4WD Monster Truck. 🏆💥 Designed to handle the roughest terrains and biggest jumps, the anodized black finish not only adds a sleek look but also protects against corrosion — so you can bash harder, longer, and in any weather. 🌧️☀️ ✅ Key Features: ✨ High-Quality Aluminum Construction – Stronger & tougher than stock🛠️ Enhanced Durability & Rigidity – For better handling & stability⚡ Anodized Finish – Sleek look + corrosion resistance🔩 Precision-Engineered Fit – Easy install & perfect alignment🔧 Pre-Installed Steel Pivot Balls – Ready to drop in 📦 Includes: ✔️ (1) Left Front Upper Arm✔️ (1) Right Front Upper Arm✔️ (2) Pre-Installed Steel Pivot Balls 🔗 Compatibility: 🔸 Arrma Granite Grom

Read more less

⚡ Hot Racing Arrma Granite Grom Aluminum Rear Lower Arm Set (Black) ⚡ 💪 Reinforced Strength & Performance for Your Grom! 💪 Upgrade your Arrma Granite Grom with the Hot Racing Aluminum Rear Lower Arm Set—built for ultimate durability, precision, and performance! These CNC-machined aluminum lower arms offer superior strength and rigidity, improving handling and stability when tackling extreme terrain and big jumps. 🏆💨 With a sleek black anodized finish, these arms provide corrosion resistance and a professional look, ensuring long-lasting performance in any bashing environment. 🌧️☀️ ✅ Key Features: ✨ CNC-Machined Aluminum Construction – Stronger & tougher than stock composite arms🛠️ Increased Rigidity & Durability – For enhanced handling & stability⚡ Anodized Black Finish – Sleek appearance + added corrosion resistance🔩 Precision-Engineered Fit – Direct replacement for factory components🔧 Includes Mounting Hardware – Easy installation for quick upgrades 📦 Includes: ✔️ (1) Left Rear Lower Arm✔️ (1) Right Rear Lower Arm✔️ (2) Mounting Screws 🔗 Compatibility: 🔸 Arrma Granite Grom

Read more less

⚡ Hot Racing Arrma Granite Grom Aluminum Rear Upper Arm Set (Black) ⚡ 💪 Precision-Engineered Strength for Ultimate Performance! 💪 Upgrade your Arrma Granite Grom with the Hot Racing Aluminum Rear Upper Arm Set! These CNC-machined aluminum arms provide next-level durability and rigidity, improving handling, control, and stability for intense off-road action. Whether you're taking on rocky terrain, high-speed runs, or massive jumps, these arms are built to handle it all. 🏆💨 The sleek black anodized finish adds a professional, high-performance look while also providing corrosion resistance, ensuring long-lasting durability no matter where you bash! 🌧️☀️ ✅ Key Features: ✨ CNC-Machined Aluminum Construction – Stronger & more durable than stock plastic arms🛠️ Enhanced Rigidity & Stability – Improved control for high-speed and off-road performance⚡ Anodized Black Finish – Sleek & professional look with added corrosion resistance🔩 Precision-Engineered Fit – Direct replacement for stock components🔧 Includes Steel Pivot Balls & O-Rings – Ensures smooth articulation and easy installation 📦 Includes: ✔️ (1) Left Rear Upper Arm✔️ (1) Right Rear Upper Arm✔️ (2) Steel Pivot Balls✔️ (4) O-Rings 🔗 Compatibility: 🔸 Arrma Granite Grom

Read more less

Lock in serious traction with the Hot Racing Aluminum Differential Locker Spool for the Arrma Grom lineup. Designed to replace the front or rear diff, this CNC-machined aluminum spool forces both wheels on an axle to rotate together—perfect for crawling, bashing, or low-traction terrain where grip is everything. 🔧 Features: ✅ CNC-machined solid aluminum construction for strength and durability✅ Anodized red finish for corrosion resistance and a sleek look✅ Locks the differential for equal wheel speed and max traction✅ Ideal upgrade for low-traction, off-road environments 📦 Includes: • (1) Aluminum Differential Locker Spool Set 🚗 Compatibility: • Arrma Granite Grom• Arrma Mojave Grom• Arrma Typhon Grom 💡 Note: Recommended for use on loose surfaces. On high-traction terrain, driveline stress may increase.

Read more less

Take your Mini-T 2.0 to the next level with these Hot Racing Steel Universal Axle Drive Shafts! Designed as a direct replacement for the stock axles, these heavy-duty upgrades deliver increased strength, smoother operation, and long-lasting performance for bashing or racing. 🔧 Features:✅ CNC machined from S2 spring steel for superior durability✅ Replaces factory dogbone and wheel shafts (LOS212013 & LOS212012)✅ Works with stock wheel hex hubs✅ Dogbone pin diameter: 2mm✅ Use light grease to maximize longevity 📦 Includes:(2) Rear Assembled Steel Universal Axle Drive Shafts 🚗 Compatibility:• Losi Mini-T 2.0 2WD

Read more less

🔥 Upgrade Your Steering for Precision and Power Take control of your Losi Mini with the Hot Racing Aluminum Steering Bellcrank. Built from high-quality 6061-T6 aluminum, this upgrade replaces the stock plastic bellcrank to deliver smoother, more precise steering response and unbeatable durability. Whether you're bashing or racing, this is a must-have performance enhancement. ⚙️ Features: CNC-machined 6061-T6 aluminum for maximum strength and style Ball bearing-supported for ultra-smooth steering action Replaces weak factory plastic for improved precision Black anodized finish for a sleek, professional look 📦 Includes: (2) Aluminum Bellcranks (1) Bellcrank Tie Rod (4) Ball Bearings (2) Stainless Steel Bearing Posts Mounting Hardware 🔧 Compatibility: Losi Mini-B Losi Mini-T 2.0

Read more less

⚙️ Strength where it matters most. Upgrade your rear drivetrain with the Hot Racing Rear Steel CVD Axle Set, built for Losi NASCAR and Arrma Grom series vehicles (Granite Grom, Mojave Grom, Typhon Grom). Crafted from CNC-machined steel and paired with aluminum clamp-style hex hubs, these axles deliver superior strength, smooth operation, and better durability than factory dog bones and plastic shafts. ✅ Direct replacement for stock CVD dog bones✅ Heavy-duty CNC steel construction✅ Pre-assembled for quick installation✅ Aluminum wheel hex hubs for improved reliability✅ Compatible with ARA330840 rear arms & ARA330841 knuckles✅ Vehicle Compatibility: • Arrma Granite Grom • Arrma Mojave Grom • Arrma Typhon Grom • Losi NASCAR 📦 Includes:• (1) Rear Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light coat of grease to CV joints for smoother performance and extended life. 📦 Includes: • (1) Front Steel CVD Axle Set (pre-assembled)• Aluminum wheel hex hubs 💡 Pro Tip: Apply a light layer of grease to CV joints for maximum performance and longevity.  

Read more less

🌀 Stronger. Smoother. Smarter. Upgrade your Mini Maxx’s drivetrain with the Hot Racing Steel Helical Rear Ring & Pinion Gear Set. Precision-machined from high-carbon steel, this 39T/10T gear combo delivers smoother operation, quieter performance, and higher torque-handling than stock. The helical cut design distributes load more evenly—perfect for high-power setups and serious bashers. ✅ Helical spiral-cut = quieter + smoother power delivery✅ High-carbon steel for extreme durability✅ Handles more torque with fewer teeth✅ Drop-in upgrade for the Traxxas Mini Maxx (rear) 📦 Includes:• (1) 39T Steel Helical Rear Ring Gear• (1) 10T Steel Helical Rear Pinion Gear Tame the torque. Quiet the chaos. Dominate the trail.

Read more less

JConcepts "P2" Clear Body w/Carpet Wing for RC10 B74Aggressive Styling. Championship Performance. Unleash peak performance and championship-winning design with the JConcepts Punisher 2 (P2) Body for the Team Associated RC10 B74. Inspired by elite drivers like Spencer Rivkin and Dakotah Phend, the P2 is engineered for high-end 1/10 racing with aggressive lines, aerodynamic enhancements, and a killer stance that dominates carpet and turf tracks alike. ✨ Key Features: 💥 Original Punisher 2 Styling – Meanest look in 1/10 racing 🧭 Raised Nose & Taller Cab – Enhances steering feel and downforce 🦾 Rear Winglets & Fin Stabilizer – Improves high-speed tracking & rigidity 🏁 Includes Clear Carpet Wing – Purpose-built for high-grip surfaces 🎨 Clear & Ready for Custom Paint – Show off your team colors and personal flair 🪶 Also available in lightweight (JCO0476L) for weight-sensitive setups 📦 Includes: (1) JConcepts RC10 B74 "P2" Buggy Body (Clear) (1) Carpet-Style Wing (Clear) 🛞 Compatibility: Team Associated RC10 B74 series 1/10 4WD buggies ⚠️ Note: Body comes clear and unpainted. Painted images shown for reference only. 💨 Cut through the air—and the competition—with the P2.

Read more less

Bring the heat to the track with the JConcepts Hazard wheels! Designed for SC10 4x4 and SC10 2WD trucks (with 12mm hex conversion), these wheels widen your stance by 6mm for maximum stability and cornering performance. Perfect for high-speed dirt oval or off-road racing, the Hazard wheels are lightweight, durable, and race-legal to the max ROAR width. Features:• Adds 3mm offset per side for a total of 6mm extra width• Designed for SC10 4x4 and SC10 2WD w/ 12mm hex conversion• Durable 1-piece design with interior/exterior ribbing• Matte-finish face in Black (3344B), White (3344W), or Yellow (3344Y)• Inspired by full-scale racing wheels• Lightweight and hassle-free for race day

Read more less

Upgrade your T6.1 with the JConcepts Mono 12mm Hex Wheels — built tough, built fast, and built to win. Designed to replace the traditional pin and bearing setup, these dish-style wheels are interchangeable front and rear and deliver the maximum size allowed under ROAR rules. Whether you're tuning for performance or durability, Mono wheels give you a modern edge. Features:• 12mm hex design for front and rear interchangeability• Fits Team Associated T6.1 with 12mm hex conversion• Includes (4) wheels per pack• Sleek dish design with molded JC logo for authenticity• Available in Yellow (3354Y) or White (3354W)• Requires JCI2170 front axles, JCI2081 hexes, and ASC9880 steering blocks• Built-in glue catch and molded vent holes

Read more less

JConcepts 12mm Hex Mono 2.2" Front Wheels (4) – Yellow or WhitePart Numbers: JCO3347Y (Yellow), JCO3347W (White) Upgrade your 1/10 buggy with these JConcepts Mono 2.2" Front Wheels, designed for performance, durability, and style. Available in bright white or fluorescent yellow, these wheels feature popular dish-style detailing and are molded using an advanced manufacturing process for maximum precision and strength. Perfect for racers running Team Associated B5, B5M, B4.1, or Kyosho RB5 platforms with 12mm hex conversions, these wheels offer great fitment, longevity, and modern styling. 🔧 Key Features: Fits: Team Associated B4.1/B5/B5M/B4.2 (w/ adaptors), Kyosho RB5 (direct fit) Quantity: 4 wheels per pack Color Options: White (JCO3347W), Yellow (JCO3347Y) ROAR-legal sizing with a dish-style concave design 12mm hex mount Vented design improves glue adherence Made from durable, race-proven material 🛠️ Compatibility Notes: For B4.1: Requires JConcepts clamping hexes (front/rear) and Team Associated hex conversion For Kyosho RB5: Use locking-style rear wheel nuts (JC #2089 Blue or #2090 Black) Designed for standard (wide) front-end configuration Will not work properly with narrow setups or without locking nuts on RB5 Specs: Feature Detail Position Front Diameter 2.2" Hex Size 12mm Quantity 4 Wheels Scale 1/10 Buggy Color Options White / Yellow Vehicle Type 2WD Buggy Bring style and performance to your front end with the JConcepts Mono wheels—perfect for racers who demand precision and durability on the track.

Read more less

Give your dirt oval racer the pro look with JConcepts 9 Shot Wheels. Inspired by full-scale sprint and late model designs, these wheels feature deep 3D spokes with a mock 5-lug bolt pattern, delivering aggressive style and ROAR-legal performance. Designed for 1/10 buggies like the B6.1, XB2, RB7, and YZ2 running a 12mm hex. Features:• 1:1 inspired 9-spoke styling with scale detail• Deep concave design with molded bolt pattern• Fits 12mm hex – compatible with B6.1, XB2, RB7, YZ2, and more• Includes 4 wheels per pack• Available in Yellow (3397Y), White (3397W), and Black (3397B)• Molded glue catch for clean tire installs• Built from durable materials using precision manufacturing  

Read more less

Step up your oval game with the JConcepts 9 Shot Rear Wheels! Inspired by full-size Sprint and Late Model cars, these wheels bring pro-level scale looks and serious performance to your 1/10 buggy. Built for dirt oval dominance with a 12mm hex fit for B6.1, XB2, RB7, YZ2, and more. Features:• Aggressive 9-spoke 1:1 inspired design with mock 5-lug detail• Fits 12mm hex rear axles – compatible with most 1/10 dirt oval platforms• Durable molded construction with vent holes for better glue control• Sleek concave dish shape for maximum strength and style• Includes 4 wheels per pack• Available in White (3398W), Yellow (3398Y), or Black (3398B)  

Read more less