🏁 Precision Machined. Ultra-Durable. Genuine XRAY Performance. The XRAY Front Drive Axle is a genuine replacement drivetrain component designed for the XB4 and compatible XT4 platforms. XRAY manufactures this axle from its renowned HUDY Spring Steel™, providing the strength, durability, and precision required for competitive 1/10 scale racing. Designed for use on either the front left or front right, this axle is a direct replacement for the factory component. ⚡ Features: 🏁 Genuine XRAY replacement part💪 Manufactured from HUDY Spring Steel™⚙️ Precision-machined front wheel drive axle🎯 Designed for accurate drivetrain fit and operation🔧 Fits either front left or front right position🚀 Built for competition-level durability🛠️ Excellent replacement or race-day spare 📦 Includes: (1) XRAY Front Drive Axle 📏 Specifications: Part Number: 365240Material: HUDY Spring Steel™Position: Front Left or RightType: Front Drive Axle 🔧 Compatibility: Verified fitment includes: ✅ XRAY XB4 Original✅ XRAY XB4 2016✅ XRAY XB4 2017✅ XRAY XB4 2018✅ XRAY XB4 2019✅ XRAY XB4 2020✅ XRAY XB4 2021 Carpet✅ XRAY XB4 2021 Dirt✅ XRAY XT4 XRAY's newer documentation also continues to show 365240 in the XB4 front drivetrain, including the XB4 2024 manual and newer XB4 parts listings. 💡 Pro Tip: Front drive axles take significant load from acceleration, steering, and impacts. If you're replacing a damaged axle, check the drive shaft coupling, cross pin, wheel bearings, and wheel hub at the same time for wear or play.

Read more less

Upgrade your suspension with the XRAY Front Hardened Shock Shafts. At 42mm length, these precision-ground shafts are engineered from hardened steel for maximum strength and wear resistance. Perfect for maintaining smooth shock action under the toughest racing conditions. Features: Precision-ground hardened steel shafts for durability 42mm length – direct replacement fit Provides smooth suspension travel and consistent damping Designed for use in high-performance racing applications Includes: (2) Front 42mm Hardened Shock Shafts Compatibility: XRAY XB2 (all variants) XRAY XT2 Stadium Truck May fit other XRAY models using big bore 42mm front shocks (check your manual for confirmation)

Read more less

🏁 High-Grip Stability. Linear Response. Factory-Matched Performance. The XRAY 42mm 5-Dot Front Spring Set is designed specifically for XRAY big-bore shocks, providing a constant linear spring rate throughout compression for predictable and consistent suspension performance. XRAY identifies the 5-dot rating directly on the springs for quick setup identification. Each XRAY spring is individually measured, selected, and matched into pairs to ensure equal length and consistent performance between the left and right sides of your race car. ⚡ Features: 🏁 Genuine XRAY optional tuning springs⚙️ 5-Dot front spring rate📏 42mm length🎯 Linear spring design provides a constant rate throughout compression🔧 Specifically designed for XRAY big-bore shocks⚖️ Individually measured and matched into pairs🚀 Provides additional suspension setup options🔥 XRAY notes the 5-dot spring can improve front stability and overall handling on very high-grip tracks 📦 Includes: (2) XRAY 42mm 5-Dot Front Springs 📏 Specifications: Part Number: 368195Position: FrontLength: 42mmSpring Type: LinearIdentification: 5 DotsQuantity: 2 🔧 Compatibility: Used across multiple XRAY 1/10 off-road platforms, including various: ✅ XRAY XB2✅ XRAY XB4✅ XRAY XT2 Fitment spans numerous generations, so racers should confirm the 42mm front spring configuration used on their specific model before ordering. 💡 Pro Tip: The 5-Dot is a setup spring, not simply a replacement spring. XRAY specifically notes that this spring can provide better front stability and overall handling in very high-grip conditions, making it a useful tuning option for carpet and other high-traction surfaces.

Read more less

Upgrade your steering precision with the XRAY Graphite Servo Saver. Crafted from XRAY’s premium graphite composite, this servo saver offers the perfect balance of strength, durability, and flex — protecting your servo gears while delivering razor-sharp steering response. Ideal for racers who demand consistent performance under high-stress conditions. Features: Strong graphite composite construction for added durability Maintains steering precision while protecting servo gears Lightweight design to reduce steering system mass Factory XRAY fit and finish Includes:(1) Graphite Servo Saver Compatibility: XRAY XB4 (2021 & newer) XRAY XT4 (2021 & newer) May fit additional XRAY platforms using the same servo saver system (check your kit manual to confirm)  

Read more less

The XRAY 2.5mm Graphite Steering Block Extension is a front-end tuning option designed to adjust Ackermann geometry and steering response. This 1-slot version provides a handling characteristic between XRAY's standard 2-slot extension and the more aggressive 0-slot version. About the Graphite Steering Block Extension Fine-Tune Steering & Ackermann XRAY designed these extensions to work on either the left or right steering block. The 1-slot configuration turns the outside wheel more than the 2-slot version, producing additional steering while remaining less aggressive than the 0-slot option. Features: Genuine XRAY optional tuning component 2.5mm graphite steering block extensions 1-slot Ackermann configuration Allows fine adjustment of steering characteristics More aggressive steering than the 2-slot configuration Less aggressive than the 0-slot configuration Can be used on left and right steering blocks Designed for tuning across different surfaces and track conditions Lightweight graphite construction Includes two extensions Includes: (2) XRAY Graphite Steering Block Extensions – 1 Slot Specifications: Manufacturer: XRAYPart Number: 322291Material: GraphiteThickness: 2.5mmConfiguration: 1 SlotPosition: Front SteeringQuantity: 2 Compatibility: ✅ XRAY XB2✅ XRAY XT2 XRAY's current XB2 documentation continues to list 322291 as the optional 1-slot steering block extension, alongside 322290 2-slot, 322292 0-slot, and 322293 3-slot configurations. 💡 Pro Tip: XRAY's Ackermann options let you tune how aggressively the car steers: 322290 – 2 Slot: Easier to drive, less aggressive322291 – 1 Slot: Middle-ground steering response322292 – 0 Slot: Most aggressive steering, suited to tight and technical layouts

Read more less

Boost your steering response with the XRAY Graphite Steering Plate. Made from high-quality graphite composite, this plate delivers improved rigidity while keeping weight to a minimum. Designed for precision and durability, it ensures consistent performance under the toughest racing conditions. Features: Premium graphite composite construction Lightweight yet ultra-strong design Increases steering precision and consistency Factory XRAY fit and finish for easy installation Includes:(1) Graphite Steering Plate Compatibility: XRAY XB4 (2021 & newer) XRAY XT4 (2021 & newer) May also fit additional XRAY vehicles using the same steering system (verify with kit manual)  

Read more less

Increase front-end grip and stability with the XRAY Lexan 1/10 Buggy Front Wing (323516). Designed to work perfectly with the XRAY XB2 body, this wider front wing improves front downforce and helps deliver more predictable steering and corner entry performance. Constructed from high-quality Lexan, this wing is both lightweight and durable, making it ideal for competitive racing. The design includes multiple mounting positions, allowing racers to adjust the wing placement and fine-tune front downforce to match different track conditions and driving styles. Features• Wider front wing design increases front downforce• Works perfectly with the XRAY XB2 buggy body• Multiple mounting positions for adjustable downforce• High-quality Lexan construction for durability and lightweight performance• Improves front-end grip and steering stability Includes• (1) XRAY Lexan 1/10 Buggy Front Wing  

Read more less

The XRAY Open Eccentric Bushing Set is a precision tuning option that allows racers to adjust suspension geometry with ease. The open design makes it simple to swap and rotate bushings without disassembling major components, saving valuable time during trackside adjustments. About the BushingsCrafted from premium composite material, these bushings provide reliable strength and long-lasting performance. By rotating the eccentric inserts, you can fine-tune roll centers and suspension angles for optimized handling on any surface. Features: Open design for quick installation and adjustments Strong composite construction for durability under racing stress Allows fine suspension and roll center tuning Lightweight and consistent fit Includes:(2) Open Eccentric Bushings Compatibility: XRAY XB4 XRAY XT4 XRAY XB2(fits models using eccentric bushings for suspension/diff height adjustments – confirm fit with your manual)

Read more less

The XRAY 77mm Rear Drive Shaft is a precision CNC-machined CVD driveshaft manufactured from XRAY's renowned HUDY Spring Steel™. Designed for competition-level durability and drivetrain efficiency, this rear driveshaft features a 2.5mm drive pin and a thin, lightweight profile while maintaining excellent strength. XRAY directly confirms these specifications for part 325327. About the Rear Drive Shaft Precision Drivetrain Performance The 77mm driveshaft is designed to provide efficient power transfer through the rear drivetrain. XRAY uses a proprietary hardening process on its HUDY Spring Steel™ driveshafts to increase durability and service life while maintaining a thin shaft profile for reduced rotating mass. Features: Genuine XRAY replacement drivetrain component CNC-machined CVD rear driveshaft Premium HUDY Spring Steel™ construction 77mm length 2.5mm drive pin Thin, lightweight driveshaft design Designed for maximum drivetrain efficiency Proprietary hardened construction for increased durability Precision manufactured for competition RC racing Includes: (1) XRAY Rear Drive Shaft Specifications: Manufacturer: XRAYPart Number: 325327Material: HUDY Spring Steel™Length: 77mmDrive Pin: 2.5mmPosition: RearQuantity: 1 Compatibility: ✅ XRAY XB2 XRAY's XB2 manuals continue to list 325327 in the rear drivetrain, including newer XB2 configurations. There is also evidence of this 77mm shaft being used on certain XB4 configurations, but I would not advertise universal XB4 compatibility because fitment varies by generation and setup. 💡 Pro Tip: When replacing the rear driveshaft, inspect the drive shaft coupling, 2.5mm pin, drive axle, and bearings for wear at the same time. Excessive play in any of these components can reduce drivetrain efficiency and accelerate wear on the new shaft.

Read more less

🏁 Genuine XRAY Replacement. Precision Steering Hardware. The XRAY +5mm Servo Saver Pivot Shafts are genuine replacement steering components designed to support the servo saver and steering assembly on compatible XRAY 1/10 4WD off-road platforms. XRAY's official parts listing identifies 362552 specifically as “Servo Saver Pivot Shaft +5mm (2).” ⚡ Features: 🏁 Genuine XRAY replacement parts📏 +5mm pivot shaft configuration⚙️ Designed for the servo saver and steering assembly🎯 Maintains proper steering-system positioning and geometry🔧 Direct replacement for the factory pivot shafts🏎️ Designed for competition-level XRAY off-road platforms🛠️ Great replacement or race-day spare 📦 Includes: (2) XRAY Servo Saver Pivot Shafts +5mm 📏 Specifications: Part Number: 362552Type: Servo Saver Pivot ShaftConfiguration: +5mmQuantity: 2Position: Steering / Servo Saver Assembly 🔧 Compatibility: Verified XRAY documentation shows 362552 used across multiple generations of: ✅ XRAY XB4✅ XRAY XT4 For example, XRAY's XB4 2024, XB4 2025, XB4 2026, and XT4 2025 manuals all identify 362552 in the steering assembly. 💡 Pro Tip: These pivot shafts work directly with the servo saver assembly, so if you're rebuilding a steering system, inspect the servo saver, bearings, steering bushings, and steering plate for play at the same time.

Read more less

Dial in your suspension with the XRAY Delrin Shock Piston Set. Made from precision-molded Delrin® for smooth, consistent damping, this complete big bore set gives you every piston option you need to fine-tune handling for any track condition. Features: Includes a complete range of pistons for big bore shocks High-quality Delrin® construction for smooth shock action Provides tuning flexibility for different track surfaces & grip levels Designed for precise fit and long-lasting performance Includes: Full piston assortment for XRAY big bore shocks Compatibility: Fits XRAY vehicles equipped with big bore shock systems

Read more less

Keep your suspension tight and precise with the XRAY Suspension Pivot Pins. Manufactured from premium hardened steel, these pins are designed for maximum strength and long life while maintaining smooth suspension movement. Features: Precision-ground hardened steel construction Ensures smooth, slop-free suspension arm movement Designed to withstand the demands of racing Easy drop-in replacement part Includes: (2) Suspension Pivot Pins Compatibility: XRAY XB2 (2WD Buggy) XRAY XT2 (2WD Stadium Truck) XRAY XB4 (4WD Buggy) Other XRAY vehicles using this pivot pin size (check manual for exact fit)

Read more less

The XRAY 5mm Open Ball Joints are precision-molded composite parts designed for smooth operation and long-lasting durability. Their open design allows for easier assembly and disassembly while reducing friction and play in the steering and suspension system. Built to XRAY’s exacting standards, these ball joints deliver consistent performance for high-level racing. Features: High-quality composite construction for strength and durability Open design for quick installation and maintenance Provides precise steering and suspension movement Optimized for reduced friction and slop Includes:(8) 5mm Open Ball Joints Compatibility: XRAY T2 series May also be used in other XRAY platforms requiring 5mm open ball joints

Read more less

🔧🏁 Lightweight Titanium Upgrade for XRAY Shock Mounting The XRAY Titanium Shock Standoff Set is a precision-machined upgrade designed for a wide range of XRAY racing platforms. Constructed from high-grade titanium, these standoffs provide an excellent combination of strength, low weight, and durability for secure, reliable shock mounting. Ideal for racers looking to upgrade factory components with lightweight premium hardware, each standoff is CNC machined for precise fitment and dependable performance. 🏁 About the Titanium Shock Standoffs ⚙️ High-Grade Titanium Construction Titanium provides excellent strength while keeping weight to a minimum, making these standoffs well suited for competitive racing applications where both durability and weight matter. 🎯 Precision CNC Machined Each standoff is CNC machined for accurate fitment, helping provide a secure mounting point for the shocks and consistent suspension assembly. 💪 Durable & Corrosion Resistant In addition to being lightweight and strong, titanium offers excellent corrosion resistance for long-lasting performance through regular racing and maintenance. 🔧 Features Genuine XRAY optional upgrade High-grade titanium construction CNC machined for precision Lightweight design Strong and durable shock mounting Corrosion resistant Precision fit for compatible XRAY platforms Premium upgrade for competitive racing Package includes two standoffs 📦 Includes (2) XRAY Titanium Shock Standoffs 📊 Product Details Specification Details Brand XRAY Part Number 368045-T Product Type Shock Standoff Material Titanium Construction CNC Machined Quantity 2 🚙 Compatibility XRAY XB2 2023 Carpet XRAY XB2 2023 Dirt XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB2 2025 Carpet XRAY XB2 2025 Dirt XRAY XB4 2023 Carpet XRAY XB4 2023 Dirt XRAY XB4 2024 Carpet XRAY XB4 2024 Dirt XRAY XB4 2025 Carpet XRAY XB4 2025 Dirt XRAY XT2 2023 Carpet XRAY XT2 2023 Dirt XRAY XT2 2024 Carpet XRAY XT2 2024 Dirt XRAY XT4    

Read more less

The XRAY Universal Drive Shaft is crafted from HUDY Spring Steel™ to deliver unbeatable strength, precision, and durability. Engineered for extreme racing conditions, this driveshaft ensures smoother power delivery, reduced wear, and improved handling consistency. Features: Made from HUDY Spring Steel™ for maximum strength and long life Precision-manufactured for perfect balance and smooth operation Helps reduce drivetrain binding and increase efficiency Ideal as a high-performance upgrade or replacement part Compatibility: XRAY XT8 – 1/8 Nitro Truggy (front & rear, check manual for placement) XRAY GTXE / GTX8 – 1/8 GT platforms (verify with kit manual) Part Number: 355222

Read more less

Smoother Rotation. Faster Corner Speed. Upgrade your XRAY X4 with the 58mm ECS BB Drive Shaft Set, engineered for maximum efficiency and precision handling. Featuring a ball-bearing inner assembly, this advanced driveshaft dramatically reduces friction for smoother steering response and improved corner speed — giving you the ultimate edge on the track. Precision Engineering by XRAY Built for professional performance, the ECS BB (Ball-Bearing) design minimizes joint wear, delivers more consistent power transfer, and enhances overall drivetrain smoothness. Ideal for competitive touring racers seeking razor-sharp control and acceleration through every turn. Features: Ball-bearing inner assembly for ultra-smooth rotation Reduces friction for faster cornering and improved stability Increases drivetrain efficiency and steering precision Durable, high-quality materials for long-lasting performance Genuine XRAY Factory Team upgrade Includes: (1) 58mm ECS BB Drive Shaft Set (unassembled) Note: Must be used with XRAY Gear Differential BB CVD Outdrives (XRA304972) – sold separately Compatibility: XRAY X4 XRAY — The Art of Performance.    

Read more less

The XRAY Aluminum Front Suspension Holder Brace is a precision-machined suspension tuning component designed for XB2 setups using the optional 23°/29° front lower arm mounts. Manufactured from premium Swiss 7075-T6 aluminum, the brace supports the front suspension holder while allowing either 23° or 29° kick-up configurations. Features: Genuine XRAY optional tuning component CNC-machined Swiss 7075-T6 aluminum Designed for 23° or 29° front kick-up Supports the optional front lower suspension arm mount Precision-machined for accurate suspension geometry Durable aluminum construction Designed for competition-level XB2 setups Required when using applicable 23°/29° optional arm mounts Includes: (1) XRAY Aluminum Front Suspension Holder Brace Specifications: Manufacturer: XRAYPart Number: 321211Material: Swiss 7075-T6 AluminumKick-Up: 23° / 29°Position: FrontType: Suspension Holder Brace Compatibility: ✅ XRAY XB2✅ XRAY XT2 configurations using this front suspension system XRAY manuals document 321211 alongside the optional 322313 aluminum and 322314 brass 23°/29° front lower arm mounts. 💡 Pro Tip: If you're buying 321211, double-check your front arm mount. This brace is specifically associated with the 23°/29° setup and is used with 322313 or 322314.

Read more less

Upgrade your XB2 with the XRAY Carbon Rear Shock Tower (4-Dots) for precision handling and durability. Made from high-quality carbon fiber, this shock tower provides the perfect balance of strength and lightweight performance. The 4-dot design gives you multiple shock mounting options, making it easy to fine-tune your suspension for any track condition. Features: Premium carbon fiber construction – lightweight yet rigid 4-dot design for expanded shock mounting adjustability Improves rear suspension tuning and consistency Factory XRAY precision fit and finish Direct replacement for stock rear shock tower Compatibility: XRAY XB2 (all versions requiring 4-dot rear tower) Includes: (1) Carbon Rear Shock Tower – 4-Dots

Read more less

🏁⚙️ Dial In Your XB2 Front-End SetupThe XRAY XB2 Composite Anti-Roll Bar Front Upper Deck is a genuine tuning component designed for the XB2 platform. This HARD composite version provides racers with an additional setup option while allowing the use of a front anti-roll bar system.🏁 About the Front Upper Deck⚙️ Anti-Roll Bar ReadyDesigned specifically for anti-roll bar applications, this front upper deck provides the proper mounting configuration for incorporating a front anti-roll bar into your XB2 setup.🔧 HARD Composite ConstructionMolded from XRAY's HARD composite material, this upper deck provides a rigid tuning option for racers looking to adjust chassis characteristics and front-end response.🏎️ Built for Setup TuningXRAY's optional composite components give racers additional ways to fine-tune their buggy for different track surfaces, grip levels, and driving preferences.✨ Features✔ Genuine XRAY tuning part✔ HARD composite construction✔ Front upper deck design✔ Designed for anti-roll bar applications✔ Provides an additional chassis tuning option✔ Direct-fit XB2 component📦 Includes (1) Composite Anti-Roll Bar Front Upper Deck – Hard🔧 Compatibility XRAY XB2📝 Notes This is the HARD composite version. Anti-roll bar components are sold separately unless otherwise specified. Verify compatibility with your specific XB2 model before installation.

Read more less

🔧🏁 Replacement Composite Chassis Side Guards for XRAY XB2 & XT2 The XRAY Composite Bent Side Chassis Side Guards are genuine replacement components originally designed for the XB2C 2020 Carpet Edition and XB2D 2020 Dirt Edition buggy kits. These molded composite guards provide factory-fit protection along the sides of the chassis while maintaining the proper profile and fit of the vehicle. Also compatible with select XRAY XT2 platforms, this two-piece set is ideal for replacing worn or damaged side guards during a rebuild or routine maintenance. 🏁 About the Chassis Side Guards ⚙️ Bent Side Design The molded bent-side profile is designed to follow the chassis layout of compatible XRAY platforms, providing proper coverage while maintaining clearance for the vehicle's internal components. 🔧 Factory Replacement Fit Designed as genuine XRAY replacement parts, these guards install in place of the original components for a clean, precise fit. 🔧 Features Genuine XRAY replacement chassis components Composite construction Bent-side design Helps protect the sides of the chassis Precision molded for factory fitment Two-piece set Direct replacement for compatible XRAY platforms Ideal for maintenance, rebuilds, or race-day spares 📦 Includes (2) XRAY Composite Bent Side Chassis Side Guards 📊 Product Details Specification Details Brand XRAY Part Number 321250 Product Type Chassis Side Guards Material Composite Design Bent Side Quantity 2 🚙 Compatibility XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XT2 2021 Carpet XRAY XT2 2021 Dirt

Read more less

Upgrade your steering setup with XRAY’s Graphite Composite C-Hubs for the XB2. Available in Right (322210-G) or Left (322220-G), these hubs are molded from high-strength graphite composite material for improved stiffness, precision, and durability over standard composite parts. Features: Strong graphite composite construction Improves steering precision & consistency Direct replacement for stock XB2 C-hubs Available in Right or Left version Compatibility: XRAY XB2 (all versions) Other XRAY platforms using XB2 C-hubs Includes (choose option): (1) Right C-Hub – 322210-G (1) Left C-Hub – 322220-G

Read more less

🔧🏁 Hard Composite Replacement C-Hubs for XRAY XB2 & XT2 The XRAY Composite C-Hub is a genuine replacement suspension component for compatible XRAY XB2 and XT2 1/10 competition platforms. Constructed from XRAY's durable Hard composite material, these C-hubs provide precise factory fitment and a rigid, responsive front suspension setup. Choose the Right or Left side needed for your vehicle. ⚙️ Choose Your Side Right C-Hub – 322210-H Left C-Hub – 322220-H 🔧 Features Genuine XRAY replacement C-hub Available in Right or Left Hard composite construction Durable and rigid design Precision molded for proper fitment Maintains factory front suspension geometry Direct replacement for compatible XRAY platforms Ideal for repairs or race-day spares 📦 Includes (1) XRAY Hard Composite C-Hub in selected Right or Left configuration 📊 Product Details Specification Details Brand XRAY Product Type C-Hub Material Composite Compound Hard Right Part Number 322210-H Left Part Number 322220-H Position Front – Right or Left 🚙 Compatibility XRAY XB2 Original XRAY XB2 Dirt XRAY XB2 2017 Carpet XRAY XB2 2017 Dirt XRAY XB2 2018 Carpet XRAY XB2 2019 Carpet XRAY XB2 2019 Dirt XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XT2 Original XRAY XT2 2021 Carpet XRAY XT2 2021 Dirt

Read more less

🏁⚙️ Fine-Tune Your XB2 Chassis FlexThe XRAY Short Composite Front Chassis Side Brace is a genuine tuning component originally designed for the XB2 2018 Carpet platform. The shorter design allows installation of the updated graphite side guard braces, giving racers an additional way to adjust front chassis flex and dial in handling for different track conditions.🏁 About the Short Front Chassis Side Brace⚙️ Adjustable Chassis FlexThe shorter front brace design works with XRAY's updated graphite side guard braces, allowing racers to tune front chassis flex as part of their overall setup.🔧 Composite ConstructionMade from composite material, these braces provide proper fit and function while allowing the chassis and side guard system to work together as intended.🏎️ Built for TuningChanging chassis flex can help racers adapt their setup for different surfaces and grip levels, making these short braces a useful tuning option for compatible XB2 and XT2 platforms.✨ Features✔ Genuine XRAY tuning parts✔ Short front chassis side brace design✔ Composite construction✔ Allows installation of updated graphite side guard braces✔ Provides additional front chassis flex adjustment options✔ Two braces included📦 Includes (2) Short Composite Front Chassis Side Braces🔧 Compatibility XRAY XB2 2018 Carpet XRAY XB2 2019 Carpet XRAY XB2 2019 Dirt XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XT2 2021 Carpet XRAY XT2 2021 Dirt📝 Notes Updated graphite side guard braces are sold separately. Genuine XRAY replacement/tuning parts.

Read more less

🔧🏁 Rigid Graphite Suspension Arm for the XRAY XB2 The XRAY Composite Front Right Suspension Arm is a genuine replacement and tuning component for compatible XRAY XB2 1/10 2WD competition buggies. Molded from XRAY's rigid Graphite compound, this version provides a stiffer suspension arm option for racers looking to fine-tune suspension response and handling. Precision molded for factory fitment, the 322113-G is ideal as a direct replacement or performance-oriented suspension tuning option for both carpet and dirt XB2 platforms. 🏁 About the Graphite Suspension Arm ⚙️ Rigid Graphite Compound XRAY offers its suspension arms in multiple material compounds to provide different setup options. This Graphite version is the most rigid option of the available Graphite, Hard, and Medium compounds, providing racers with a stiffer suspension configuration. 🔧 Factory Fitment Designed for compatible XB2 platforms, the arm provides a seamless fit while maintaining XRAY's intended suspension geometry and mounting locations. 🔧 Features Genuine XRAY replacement and tuning component Front right lower suspension arm Rigid Graphite compound Stiffer option compared to Hard and Medium compounds Precision molded construction Direct-fit installation Maintains factory suspension geometry Suitable for carpet and dirt racing Ideal for replacement or suspension setup tuning 📦 Includes (1) XRAY Composite Front Right Suspension Arm – Graphite 📊 Product Details Specification Details Brand XRAY Part Number 322113-G Product Type Front Lower Suspension Arm Position Front Right Compound Graphite Application XRAY XB2 1/10 2WD Buggy 🚙 Compatibility XRAY XB2 Original XRAY XB2 2020 Carpet XRAY XB2 2020 Dirt XRAY XB2 2021 Carpet XRAY XB2 2021 Dirt XRAY XB2 2022 Carpet XRAY XB2 2022 Dirt XRAY XB2 2023 Carpet XRAY XB2 2023 Dirt XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt Note: The supplied description says "left side," but the actual product listing identifies 322113-G as the Front Right Suspension Arm, so I kept this ad as Front Right.

Read more less

 🏁 Factory Fit. Hard Composite. Precise Front-End Performance Keep your XRAY buggy performing with the precision and consistency it was designed for with the XRAY Hard Composite Front Roll Center Holder. This genuine XRAY replacement component is manufactured from hard composite material and designed to provide the correct mounting and geometry for the front roll center assembly. It's an ideal replacement for a worn or damaged component or a useful spare to keep in your race-day parts box. ⚡ Features: 🏁 Genuine XRAY replacement part💪 Hard composite construction🎯 Designed to maintain precise front suspension geometry⚙️ Supports the front roll center assembly🔧 Direct replacement for the original component🚀 Designed for consistent, competition-level performance🛠️ Great replacement or race-day spare 📦 Includes: (1) XRAY Hard Composite Front Roll Center Holder 📏 Specifications: Part Number: 322040-HMaterial: Hard CompositePosition: FrontType: Roll Center Holder 🔧 Compatibility: ✅ XRAY XB2 Original✅ XRAY XB2 Dirt✅ XRAY XB2 2017 Carpet✅ XRAY XB2 2017 Dirt✅ XRAY XB2 2018 Carpet✅ XRAY XB2 2019 Carpet✅ XRAY XB2 2019 Dirt✅ XRAY XB2 2020 Carpet✅ XRAY XB2 2020 Dirt✅ XRAY XT2 Original✅ XRAY XT2 2021 Carpet✅ XRAY XT2 2021 Dirt 💡 Pro Tip: The front roll center is an important part of suspension geometry and can affect steering response and overall chassis behavior. When replacing the holder, inspect the surrounding suspension hardware for wear or excessive play to help keep your XRAY's front end precise and consistent.

Read more less

The XRAY XB2 Composite Idler Gear is the direct replacement 25-tooth idler gear for the XB2 1/10 scale buggy. Precision molded for durability and smooth drivetrain operation, this gear keeps your XB2 running strong with consistent performance. Features: Genuine XRAY replacement part Composite construction for strength and low wear Smooth, efficient power transfer 25-tooth idler gear Compatibility: XRAY XB2 1/10 Buggy Includes: (1) 25T Composite Idler Gear  

Read more less

Upgrade your front end with XRAY’s Graphite Composite Steering Block for the XB2. Molded from a reinforced graphite composite material, this steering block provides increased strength and precision compared to standard composite parts, ensuring smoother steering response and long-lasting durability. Features: Strong graphite composite material for added rigidity Enhances steering consistency and precision Direct replacement upgrade for stock XB2 steering blocks Lightweight yet durable design Compatibility: XRAY XB2 (all versions) Other XRAY platforms using XB2 steering blocks Includes: (1) Graphite Composite Steering Block – 322250-G

Read more less

The XRAY XB2 Front Inner Suspension Pivot Pins are precision-machined replacements built to handle the demands of competitive racing. Designed for strength and accuracy, these pins maintain exact suspension geometry for consistent handling and durability. Features: High-strength steel construction Precision fit for smooth suspension operation Maintains accurate geometry under load Direct replacement for the XB2 buggy Includes:(2) Front Inner Suspension Pivot Pins      

Read more less

The XRAY XB2 Front Outer Pivot Pins are durable, precision-machined replacements engineered to keep your buggy’s suspension tight and consistent. Designed for smooth operation and long-lasting performance, these pins ensure accurate alignment and dependable handling through every race. Features: Precision-machined steel construction Ensures consistent suspension geometry Built for strength and durability Direct replacement for the XB2 buggy Includes:(2) Front Outer Pivot Pins      

Read more less

Durable factory replacement for the XB2 1/10 Buggy Overview:The XRAY XB2 Hard Graphite Composite Rear Suspension Arm delivers race-proven durability and precision handling for your XB2 1/10 buggy. Manufactured from XRAY’s exclusive hard graphite-reinforced composite, this arm provides the perfect balance of stiffness and flex—ideal for high-traction surfaces and competitive racing. About the Rear Suspension ArmThis left-side rear arm features XRAY’s signature design for smooth suspension movement and maximum impact strength. The hard graphite material improves cornering consistency and reduces flex under load, providing a more responsive feel and better traction balance across a range of track conditions. Features: Genuine XRAY Factory Team part Hard graphite composite for increased stiffness and reduced flex Provides improved steering precision and consistent cornering Ideal for high-grip indoor and outdoor tracks Precision-molded for perfect fit and geometry Lightweight yet highly durable construction Specifications: Part Type Rear Suspension Arm (Left) Material Hard Graphite Composite Vehicle Compatibility XRAY XB2 1/10 2WD Buggy Position Rear – Left Side Includes: (1) Hard Graphite Composite Rear Suspension Arm (Left)

Read more less

🏁 Genuine XRAY Replacement. Lightweight Composite. Precision Drivetrain Fit. Keep your XRAY drivetrain running smoothly with the XRAY XB2 LCG 38-Tooth Composite Gear. Designed for the LCG gear differential system, this genuine XRAY replacement component provides the precise fit and drivetrain performance expected from XRAY competition platforms. The lightweight composite construction helps keep rotating mass low while providing the durability needed for competitive 1/10 scale racing. ⚡ Features: 🏁 Genuine XRAY replacement part⚙️ 38-tooth composite gear🪶 Lightweight composite construction🎯 Precision molded for accurate fit and smooth operation🔧 Designed for the XRAY LCG gear differential system🚀 Helps maintain efficient and consistent drivetrain performance🛠️ Ideal replacement for worn or damaged differential components🏎️ Designed for competition-level 1/10 scale racing 📦 Includes: (1) XRAY LCG Composite Gear (38T) 📏 Specifications: Part Number: 324238Tooth Count: 38TMaterial: CompositeType: LCG Gear Differential Component 🔧 Compatibility: ✅ XRAY XB2 2020 Carpet✅ XRAY XB2 2020 Dirt✅ XRAY XT2 2021 Carpet 💡 Pro Tip: Differential and drivetrain gears experience constant load during acceleration and braking. If you're replacing a worn 38T gear, inspect the mating gears and differential components at the same time for damaged or rounded teeth. Keeping the complete gear set in good condition helps maintain a smooth, efficient drivetrain and consistent power delivery.

Read more less

🏁 Lightweight Graphite Composite. LCG Differential Performance. Upgrade or replace the gear differential pulley/case on your XRAY with the 324954-G Graphite Composite Gear Differential Case with 53T Pulley. XRAY identifies this as the graphite optional version of the standard 324954 LCG differential component. Designed for XRAY's LCG gear differential, the graphite composite construction provides an optional alternative to the standard hard-composite version while retaining the factory 53-tooth configuration. ⚡ Features: 🏁 Genuine XRAY option part⚙️ Integrated 53-tooth gear differential pulley🪶 Graphite composite construction🔧 Designed for XRAY's LCG gear differential system🎯 Precision factory fitment🚀 Optional graphite version of standard part #324954🛠️ Excellent replacement or tuning component for your race-day parts box 📦 Includes: (1) XRAY LCG Graphite Composite Gear Differential Case with 53T Pulley 📏 Specifications: Part Number: 324954-GMaterial: Graphite CompositeTooth Count: 53TType: LCG Gear Differential Case / PulleyPosition: Rear Drivetrain 🔧 Verified Compatibility: ✅ XRAY XB2 2020 Carpet✅ XRAY XB2 2020 Dirt✅ XRAY XT2 2021 Carpet XRAY's own documentation also shows 324954-G as the optional graphite gear-differential pulley in later XB2 and XT2 LCG differential assemblies. 💡 Pro Tip: The important distinction here is the “-G” suffix. 324954 is the standard hard-composite 53T LCG component, while 324954-G is the optional graphite-composite version.

Read more less

🔧🏁 Medium-Compound Rear Suspension Arm for XRAY XB2 & XB4 The XRAY Left Rear Lower Suspension Arm is a genuine replacement suspension component designed for compatible XRAY XB2 and XB4 1/10 competition buggies. Molded from XRAY's Medium composite compound, this arm provides the standard balance of durability, flex, and suspension response for both carpet and dirt racing applications. Precision molded for direct factory fitment, it's an ideal replacement for a worn or damaged suspension arm or a useful spare to keep ready in your pit box. 🏁 About the Medium Suspension Arm ⚙️ Medium Composite Compound XRAY offers these suspension arms in multiple compounds, including Medium, Hard, and Graphite. This Medium version provides the standard compound option for a balanced combination of flex and durability. 🔧 Factory Fitment Designed for compatible XB2 and XB4 platforms, the arm installs directly while maintaining XRAY's intended rear suspension geometry and mounting locations. 🔧 Features Genuine XRAY replacement suspension component Left rear lower suspension arm Medium composite compound Balanced flex and durability Precision molded construction Direct factory fitment Maintains proper suspension geometry Suitable for carpet and dirt racing Compatible with select XB2 and XB4 platforms Great replacement or race-day spare 📦 Includes (1) XRAY Left Rear Lower Suspension Arm – Medium 📊 Product Details Specification Details Brand XRAY Part Number 363122-M Product Type Rear Lower Suspension Arm Position Left Rear Compound Medium Application XRAY XB2 / XB4 🚙 Compatibility XRAY XB2 2021 Carpet XRAY XB2 2021 Dirt XRAY XB2 2023 Carpet XRAY XB2 2023 Dirt XRAY XB2 2024 Carpet XRAY XB2 2024 Dirt XRAY XB4 2020 XRAY XB4 2021 Carpet XRAY XB4 2021 Dirt XRAY XB4 2023 Carpet XRAY XB4 2023 Dirt XRAY XB4 2024 Carpet XRAY XB4 2024 Dirt

Read more less

The XRAY XB2 Lexan Front Wing (323512) is a genuine replacement wing originally included with the XRAY XB2 Carpet Edition buggy. This front wing helps increase front-end downforce, improving steering response and corner entry on high-traction surfaces such as carpet tracks. Made from durable Lexan material, the wing is lightweight yet strong enough to handle the demands of competitive racing. It’s an excellent replacement part for worn or damaged wings and a great tuning option for racers looking to add more front steering to their XB2 buggy. Features• Genuine XRAY replacement front wing• Helps increase steering and front-end grip• Ideal for high-traction carpet racing• Lightweight Lexan construction for durability• Designed for the XRAY XB2 platform Includes• (1) XRAY XB2 Lexan Front Wing      

Read more less

Fine-tune your XB2’s rear-end handling with the XRAY Short Rear Anti-Roll Bar series. Designed for precision adjustment, these sway bars control body roll and improve cornering stability, giving you the flexibility to adapt your buggy to any track condition. A softer bar provides more rear grip and smoother steering response, while a stiffer bar sharpens steering and reduces rear traction. Choose the perfect thickness to match your setup! Available Sizes: 1.0mm (323490) – Softest 1.1mm (323491) 1.2mm (323492) 1.3mm (323493) 1.4mm (323494) 1.6mm (323496) – Hardest Effects of Rear Roll Bar Changes: Softer Bar: Increases chassis roll Increases rear grip in corners Decreases on-power steering Car responds more slowly to direction changes Stiffer Bar: Decreases chassis roll Decreases rear grip in corners Increases on-power steering Car responds quicker to direction changes Features: High-quality spring steel construction Short design for precise handling response Essential tuning part for competitive setups Compatibility: XRAY XB2 (All Versions) Includes: (1) Short Rear Anti-Roll Bar (size selected)    

Read more less

Fine-tune your XB2 with this Graphite Composite Front Left Suspension Arm featuring Low Shock Mounting (LSM) geometry in the short configuration. The Graphite blend offers the perfect balance of rigidity and controlled flex, making it ideal for medium to high-traction tracks where precision and cornering speed are key. Features: Graphite composite material for optimized stiffness and responsiveness Low Shock Mounting (LSM) design improves suspension geometry and handling Short length design for sharper steering response Factory XRAY precision molding for perfect fit Compatibility: XRAY XB2 (All variants using LSM geometry) Includes: (1) Front Left Suspension Arm – Short – Graphite

Read more less