Keep your X-Maxx running strong with the Traxxas Steel Bulkhead Tie Bar Set. Designed as a direct replacement for stock components, this set reinforces the front and rear bulkheads for improved durability under extreme bashing conditions. Built from hardened steel, these tie bars help maintain chassis alignment and structural rigidity during high-load impacts and big-air landings. Features: ✔️ Genuine Traxxas replacement part✔️ Hardened steel construction for maximum strength✔️ Reinforces bulkheads and improves overall durability✔️ Direct fit for simple installation Includes: (1) Upper Steel Tie Bar (2) Lower Steel Tie Bars Compatibility: Traxxas X-Maxx

Read more less

Servo Horn Overview:This is a replacement steering and linkage servo horn designed for the Traxxas X-Maxx. It comes pre-assembled with pivot balls for easy installation and reliable steering performance. 🔧 Key Features ✔ Replacement servo horn and linkage✔ Pre-assembled with pivot balls✔ Maintains precise steering control✔ Direct fit design 📦 Includes (1) Steering & Linkage Servo Horn Assembly 🚗 Compatibility Traxxas X-Maxx Ideal for replacing worn or damaged components, this part helps keep your steering system strong and responsive.  

Read more less

This is a replacement Traxxas X-Maxx Steering Block Set, including a left and right side. These blocks are labeled "Left" and "Right" and must be installed on the correct side.  

Read more less

Keep your suspension solid and secure with this pack of Traxxas Suspension Pin Retainers for the X-Maxx and XRT. Designed to hold the hinge pins in place at the inner upper arm position, these retainers are a must-have for routine maintenance or repairs. 🔧 Includes: (4) Suspension Pin Retainers 🛠️ Features: Direct replacement parts for Traxxas X-Maxx and XRT Ensures secure hinge pin fitment Made from durable molded composite Simple install – ideal for repairs or spares Don’t let loose pins take you out of the action—keep your X-Maxx or XRT dialed in with these factory-spec retainers!

Read more less

Traxxas X-Maxx/XRT Aluminum Differential Housing Carrier (Requires TRA7783X) Upgrade your drivetrain durability with the Traxxas X-Maxx/XRT Aluminum Differential Housing Carrier. Precision-machined from aluminum, this housing offers increased strength and improved heat dissipation for high-performance 8S setups. It's designed specifically for models equipped with the Torque-Biasing Center Drive and reinforced front/rear differentials. 🔧 NOTE: Requires TRA7783X Spider Gear Shaft & Spacer Set for proper installation. ✅ Features: 🏗️ CNC-machined aluminum for enhanced durability and precision ⚙️ Ideal for high-stress, high-speed 8S bashing and racing 🧊 Improved heat dissipation over stock composite housings 🔩 Designed for use with front/rear diffs and Torque-Biasing Center Drive systems 📦 Includes: (1) Aluminum Differential Housing Carrier 🚗 Compatibility: ✅ Traxxas X-Maxx 8S (#77086-4) ✅ Traxxas XRT 8S 🏁 Stronger. Cooler. Race-Ready. Upgrade your differential housing to aluminum today.

Read more less

  This is a replacement Traxxas X-Maxx Hardened Steel Shock Mount Suspension Pin Set, including two 4x25mm and two 4x38mm pins. For use in the front or rear. COMPATIBILITY: Traxxas X-MaxxTraxxas XRT

Read more less

Built for brutal 8S power, the Traxxas 11T Heavy Duty Rear Pinion Gear is a direct replacement for the X-Maxx and XRT. Designed to pair with the 35T Heavy Duty Ring Gear (#7792), this gear delivers the strength and durability needed to keep you bashing harder and longer. Features:• Heavy-duty 11-tooth rear differential pinion gear• Designed for use with 35T ring gear (#7792)• Reinforced for extreme 8S power• Perfect fit for high-stress drivetrain setups Compatibility:• Traxxas X-Maxx• Traxxas XRT Includes:• (1) 11T Rear Pinion GearPart Number: 7791 Upgrade your rear diff and stay in the fight with genuine Traxxas strength.  

Read more less

Servo Horn Overview:Upgrade your steering strength and precision with this Traxxas aluminum servo horn. Designed for high-performance applications, it delivers increased durability and a more precise steering feel compared to stock components. 🏁 About the Aluminum Servo Horn 💪 Built for Strength Machined from 6061-T6 aluminum, this servo horn is designed to handle high-power servo setups and demanding driving conditions. 🎯 Precision Steering The double-shear design improves rigidity and reduces flex, helping deliver more accurate and consistent steering response. 🎨 Style Options Available in multiple anodized colors, adding a clean, custom look while improving durability. 🔧 Key Features ✔ 6061-T6 aluminum construction✔ Double-shear design for added strength✔ Improved steering precision✔ Anodized finish for durability and style✔ Ideal for high-power servo upgrades✔ Direct fit Traxxas upgrade 📦 Includes (1) Aluminum Servo Horn 🎨 Available Colors Gray Orange Blue Green Red 🚗 Compatibility Traxxas X-Maxx Traxxas XRT A strong, clean upgrade that improves steering response while adding durability and style to your build.    

Read more less

Traxxas XRT Rear Lower BulkheadOEM Replacement for Your XRT Beast Bulkhead Overview:Keep your XRT running strong with the Traxxas Rear Lower Bulkhead—a genuine replacement part designed for a perfect fit and lasting durability. Whether you're repairing after a hard hit or doing preventative maintenance, this is the exact part you need to get back on the throttle. Features: Factory replacement part for easy installation Durable composite construction Designed specifically for the Traxxas XRT platform Includes: (1) Rear Lower Bulkhead Compatibility:  • Traxxas XRT

Read more less

Restore the aggressive race look and high-speed stability of your truck with the Traxxas XRT Rear Wing (7821). Designed as a direct replacement for the Traxxas XRT race truck, this wing helps maintain proper aerodynamics and rear-end stability during high-speed runs and hard acceleration. Available in multiple color options—Black, Green, Red, Blue, and Orange—this wing lets you refresh the look of your XRT while keeping the truck performing as intended. Built from durable material and designed for a perfect factory fit, installation is quick and straightforward. Features• Genuine Traxxas replacement rear wing• Helps maintain high-speed stability and aerodynamic performance• Durable construction for long-lasting performance• Direct replacement fit for the Traxxas XRT• Available in Black, Green, Red, Blue, or Orange Compatibility• Traxxas XRT Includes• (1) Rear Wing• (4) 4x12mm Screws    

Read more less

  Overview:The Traxxas XX-Long Hard Chrome Shock Shafts are designed for durability and smooth suspension performance. Precision-ground and hard chrome-plated, these shafts provide resistance against wear and bending while ensuring ultra-smooth shock action, even under extreme RC driving conditions. Features: Set of 2 XX-Long shock shafts Hard chrome finish for maximum durability and smooth operation Precision-ground for exact fit and long life Direct factory replacement for Traxxas big-bore and Ultra shocks Compatibility: Traxxas Ultra Shocks and Big Bore Shocks requiring XX-Long shafts Commonly used in larger Traxxas models such as: Stampede Rustler Bandit Slash (depending on configuration) Always check your manual for exact fitment Includes: (2) XX-Long Hard Chrome Shock Shafts Part Number: 2656

Read more less

  Overview:The Traxxas XX-Long Hardened Steel Shock Shafts deliver maximum strength and durability for extreme RC action. Constructed from premium hardened steel, these shafts resist bending and wear far better than stock, ensuring consistent performance and smooth suspension movement—even under the harshest bashing or racing conditions. Features: Set of 2 XX-Long shock shafts Made from hardened steel for extreme strength Precision-ground for smooth shock action and long life Tougher and more durable than chrome-plated shafts Genuine Traxxas factory replacement part Compatibility: Traxxas Ultra Shocks and Big Bore Shocks requiring XX-Long shafts Commonly used in larger Traxxas vehicles, including: Stampede Rustler Bandit Slash (models using XX-Long shocks) Check your model’s manual for exact fitment Includes: (2) XX-Long Hardened Steel Shock Shafts Part Number: 2656T

Read more less

Dial in your wheelies.Keep your Traxxas ride balanced and bold with the Traxxas Wheelie Bar Assembly — the perfect upgrade for Slash®, Stampede®, Rustler®, and Bandit® platforms. Designed to control your launch angle and protect critical drivetrain components, this wheelie bar delivers both performance and style. Built for Bashers. Tuned for Control.With a four-position adjustable design, you can fine-tune how high your front wheels lift during acceleration. The durable composite-nylon construction absorbs impacts and helps shield your motor and transmission case from damage on hard landings or high-speed flips. Pre-assembled and color-matched, it installs in minutes and adds instant flair to your setup. 💪 Features: Patented four-position height adjustment for precise wheelie control Tough composite-nylon construction resists impacts and protects key components Pre-assembled and ready to install — includes all mounting hardware Helps maintain stability under extreme acceleration Adds visual style with six color options: Black, Orange, Red, Pink, Blue, or Green 📦 Includes: (1) Pre-Assembled Wheelie Bar (3) Mounting Screws ✅ Compatibility: Bandit® Rustler® 2WD / 4X4 Slash® 2WD / 4X4 / 4X4 Ultimate Stampede® 2WD / 4X4      

Read more less

 ⚙️ Weight. Grip. Trail-Dominating Stability. Upgrade your micro crawler with the Treal Hobby Type D Brass Beadlock Wheels—built from solid brass to maximize traction, lower your center of gravity, and deliver serious performance on technical terrain. With a premium black and gold finish, these wheels bring both performance and custom style to your build. ⚡ Features: 🛞 Solid CNC-machined brass construction for maximum strength and durability⚖️ Adds 160g total unsprung weight for improved traction and stability🧭 Lowers center of gravity for better climbing and side-hill control🔧 Beadlock design securely holds tires without glue🔩 Removable hex hubs for offset tuning and fitment flexibility🎨 Black/Gold finish for a premium custom look🏁 Interchangeable center rings for added customization 📏 Specifications: Part Number: TLHTSCX24-265Material: BrassWheel Size: 1.0"Weight: 40g each (160g total) 📦 Includes: (4) Type D 1.0" Brass Beadlock Wheels 🔧 Compatibility: Axial SCX24Traxxas TRX-4MFits most 1/24 and 1/18 scale micro crawlers 💡 Pro Tip: Heavy brass wheels make one of the biggest performance gains on micro crawlers—pair with soft tires and silicone inserts to maximize traction and crawling control.

Read more less

Treal Hobby Type I 1.9" Vintage 12-Hole Beadlock Wheels (Titanium) (4) – TLHTWHEEL-100 Bring a classic scale look to your 1/10 crawler with the Treal Hobby Type I 1.9" Vintage 12-Hole Beadlock Wheels. Crafted from premium CNC-machined aluminum and outfitted with interchangeable steel center rings, these wheels not only look vintage but deliver modern performance and strength. Each wheel adds substantial unsprung weight—132g per wheel—to lower your rig’s center of gravity, improving crawling stability and grip over technical terrain. The removable 12mm hex hubs give you the flexibility to adjust offset for custom fitment and driving preferences. This Titanium finish offers a sleek, timeless appearance perfect for scale builds. Features: Scale vintage 12-hole beadlock design CNC-machined aluminum construction with steel heavy center rings Beadlock system—no glue required Standard 12mm hex hubs (removable for offset adjustment) Compatible with most 1/10 scale rock crawlers and trail trucks Available in multiple color finishes Adds a total of 528g unsprung weight for improved crawling performance Specifications: Wheel Size: 1.9" Inner Wheel Diameter: 45.2mm (1.779") Width: 27mm (1.063") Offset: 2.0mm (0.078") Hex Hub: 12x9mm Weight: ~132g per wheel (fully assembled) Material: Aluminum (wheel), Steel (center ring) Includes: (4) Type I 1.9" Vintage 12-Hole Beadlock Wheels (Titanium) (4) Steel center rings (4) 12mm hex hubs Give your crawler the perfect mix of vintage style and modern strength with Treal Type I wheels.

Read more less

Treal Hobby Type K 1.0" 12-Hole Beadlock Classic Vintage Wagon Wheels (Black, Bronze, Grey, Silver) (4) – 28.9g Each Give your micro crawler that scale vintage flair with Treal Hobby's Type K 1.0" Classic Wagon Wheels. These beadlock rims are CNC machined from aluminum and feature interchangeable brass center rings for added weight and realism. Each set adds a total of 115.6g of unsprung weight down low—improving traction, crawling stability, and overall performance. Offered in four sleek finishes—Black, Bronze, Grey, and Silver—these wheels let you customize your rig’s style while maintaining premium durability and functionality. Features: Classic 12-hole vintage design Beadlock for easy mounting—no glue needed CNC-machined aluminum construction Brass center ring for added weight and balance Removable hex hub for offset tuning and customization Available in Black, Bronze, Grey, and Silver Adds 115.6g total weight (28.9g per wheel) Specifications: Application: 1/24 & 1/18 Micro Crawlers Outer Diameter: 1.22in (31mm) Wheel Diameter: 1.0in (25.4mm) Width: 0.5in (12.7mm) Hex Hub: 7mm (0.275in) Weight (each): 28.9g assembled Includes: (4) Type K 1.0" Beadlock Wheels in your choice of finish Brass center rings Removable hex hubs Upgrade your mini crawler’s looks and performance with the scale detail and rock-solid grip of Treal Hobby's Type K wheels.

Read more less

Treal Hobby Type V 1.9" V-Spoke Beadlock Wheels (Black) (4) – TLHTWHEEL-167 Upgrade your 1/10 crawler with the Treal Hobby Type V 1.9" V-Spoke Beadlock Wheels. Machined from premium CNC aluminum with heavy-duty iron center rings, these wheels combine aggressive styling, added weight down low, and rugged durability for superior crawling performance. The bold V-spoke design adds serious scale realism, while the beadlock system ensures a secure tire fit without glue. The removable 12mm hex hub lets you fine-tune your offset or swap out for a different hub style. With 490g of total unsprung weight added, you'll enjoy better traction and stability over technical terrain. Features: CNC-machined aluminum construction V-Spoke design for scale realism 1.9” standard wheel size Removable 12mm hex hub for adjustable offset Interchangeable iron center rings for added weight Pre-assembled for quick installation Compatible with most 1/10 scale crawlers Adds 122.5g per wheel of low-mounted weight for better crawling Specs: Inner Wheel Diameter: 1.77" (45mm) Outer Diameter: 1.9" (48.26mm) Width: 1.1" (27.9mm) Hex Size: 12mm Offset: -4mm Weight: 122.5g per wheel Includes: (4) Pre-Assembled Type V 1.9" V-Spoke Beadlock Wheels (Black)  

Read more less

Built for national-level competition, the Trinity Slot Machine 2 Certified 13.5T Brushless Motor delivers elite performance, precision throttle control, and race-proven consistency. Each certified motor is hand-selected for top performance and includes a dyno sheet verifying peak output, giving racers confidence in their equipment right out of the box. Designed for competitive stock-class racing, this sensored motor provides smooth power delivery and excellent efficiency on the track. 🏁 Competition-Level Performance The Slot Machine 2 motor features a precision sensored design that ensures smooth throttle response and predictable power delivery. This makes it ideal for tight, technical tracks where consistent control and acceleration are critical. A highly machined aluminum motor can reduces weight while dramatically improving heat dissipation, helping maintain performance during long mains and qualifying heats. ⚙️ Tunable & Race Ready The motor includes a tunable endbell with laser-etched timing marks, making timing adjustments quick, precise, and repeatable for racers dialing in their setup. Each certified version is hand selected and dyno tested, ensuring it meets Trinity’s top performance standards. ⚡ Features Certified hand-selected high-performance motor Includes dyno sheet verifying peak performance Sensored brushless design for smooth throttle response Lightweight heavily machined aluminum motor can Improved cooling and heat dissipation Adjustable timing with laser-etched endbell markings Designed for high-level competition racing ROAR approved for sanctioned events 📦 Includes (1) Trinity Slot Machine 2 Certified Brushless Motor (13.5T) Dyno performance readout Designed for racers who want proven dyno-tested performance and championship-level reliability, the Trinity Slot Machine 2 Certified motor is built to perform when it matters most.

Read more less

The Trinity Slot Machine 2 Certified 17.5T Brushless Motor is built for serious racers looking for the best possible performance in stock-class competition. Each certified motor is hand-selected for the lowest resistance and highest performance, ensuring elite power output and consistency on the track. Designed with a sensored brushless system, the Slot Machine 2 delivers smooth throttle response and precise control—perfect for competitive racing environments where consistency matters. 🏁 Race-Tuned Performance The Certified version of the Slot Machine 2 is carefully tested and selected to ensure top-tier performance. These motors are chosen from production batches to deliver the best electrical efficiency and power potential, giving racers a competitive edge. The machined aluminum motor can improves cooling while reducing weight, helping maintain consistent performance through long mains and demanding race conditions. ⚙️ Tunable Endbell The adjustable endbell features laser-etched timing marks, allowing racers to fine-tune motor timing easily and accurately to match track conditions and driving style. ⚡ Features Certified hand-selected motor for maximum performance Selected for lowest resistance and highest output Sensored brushless design for smooth throttle response Lightweight machined aluminum motor can Improved cooling for consistent race performance Tunable endbell with laser-etched timing adjustments Built for competitive stock-class racing 📦 Includes (1) Trinity Slot Machine 2 Certified Brushless Motor (17.5T) Designed for racers who demand maximum consistency, efficiency, and race-proven performance, the Slot Machine 2 Certified 17.5T motor is a top choice for competitive stock racing.

Read more less

The Trinity Slot Machine 2 Certified 21.5T Brushless Motor is built for competitive stock-class racing, delivering smooth power, excellent efficiency, and race-proven consistency. Each certified motor is hand-selected for the lowest resistance and highest performance, ensuring racers get a top-performing motor right out of the package. With a sensored brushless design and precision construction, the Slot Machine 2 provides the throttle control and reliability needed for tight racing and long mains. 🏁 Certified Race Performance The Certified version of the Slot Machine 2 motor is individually tested and selected from production batches to deliver the best electrical efficiency and power output. This process ensures consistent performance that serious racers can trust. The machined aluminum motor can reduces weight while improving heat dissipation, helping the motor stay cool and consistent during demanding race conditions. ⚙️ Tunable Endbell An adjustable endbell with laser-etched timing marks allows for quick and accurate timing adjustments, making it easy to fine-tune performance for different track conditions. ⚡ Features Certified hand-selected motor for maximum performance Selected for lowest resistance and peak output Sensored brushless design for smooth throttle response Lightweight machined aluminum motor can Improved cooling for consistent race performance Tunable endbell with laser-etched timing adjustments Ideal for competitive 21.5 stock-class racing 📦 Includes (1) Trinity Slot Machine 2 Certified Brushless Motor (21.5T) Built for racers who demand maximum efficiency, precision tuning, and consistent performance, the Slot Machine 2 Certified 21.5T motor is a strong contender for competitive stock racing.  

Read more less

Enhance the performance and control of your micro crawler tires with the UpGrade RC 1.0" Dual Stage Foam Inserts. Designed for 1.0" Class 2 crawler tires, these inserts deliver the perfect balance of flexibility and support — allowing your tires to conform to terrain while maintaining sidewall strength and stability. ✅ Dual Stage Design – Soft outer foam for terrain conformity, firm inner foam for structure and control✅ Improved Sidewall Support – Prevents tire collapse under heavy loads✅ Consistent Ground Contact – Maximizes traction and performance on uneven terrain✅ Perfect Fit for 1.0" Micro Crawler Tires – Ideal for both trail and comp setups✅ Durable Closed-Cell Inner Foam – Maintains shape longer and resists moisture absorption Specifications: Outer Diameter: 57mm (2.24") Inner Diameter: 1.0" (25.4mm) Configuration: Dual Stage (Soft Outer / Firm Inner) Includes: (2) UpGrade RC 1.0" Micro Crawler Dual Stage Foam Inserts Compatibility: Axial SCX24 Furitek Cayman Furitek FX118 HPI Venture 18 HobbyPlus CR-18 Losi Micro Rock Crawler Redcat Ascent-18 Traxxas TRX-4M ⚡ More control, more traction — UpGrade RC dual-stage foams give your crawler the edge where it counts.    

Read more less

Dominate any surface with the UpGrade RC Micro Razor Wire 1.0" Class 1 Extreme Performance Tires — built for serious crawlers who demand maximum traction and control on unpredictable terrain. Designed for loose dirt, gravel, mud, and technical obstacles, these tires feature an aggressive open-lug tread for superior grip and self-cleaning performance. ✅ Aggressive Open-Lug Tread – Alternating lug sizes bite into loose terrain for powerful traction✅ Self-Cleaning Design – Prevents debris buildup for consistent grip run after run✅ Super Soft Compound – Conforms to rocks and obstacles for ultimate control✅ Trail & Comp Ready – Engineered for both scale realism and competitive performance✅ Side Lug Reinforcement – Delivers improved sidehill traction and corner stability✅ Pre-Installed Foam Inserts – Soft inserts maintain shape and optimize ground contact Specifications: Outer Diameter: 2.24" (57mm) Inner Diameter: 1.0" (25.4mm) Width: 0.89" (22.77mm) Includes: (2) UpGrade RC Razor Wire 1.0" Tires (2) Pre-Installed Soft Foam Inserts Compatibility: Axial SCX24 Furitek Cayman Furitek Cayman Pro Furitek FX118 HPI Venture 18 HobbyPlus CR-18 Losi Micro Rock Crawler Redcat Ascent-18 Traxxas TRX-4M ⚡ Grip harder, climb higher — the Razor Wire delivers competition-grade traction for micro crawlers that refuse to quit.

Read more less

Versatile Fit. Precision Mounting. Customize your VS4-10 build with the Vanquish Products Body Post Set, designed to provide multiple mounting options for a perfect body fit. Featuring six different height body posts, this set makes it easy to fine-tune your setup for a variety of crawler bodies and configurations. Precision by Design Each body post is crafted from durable, high-quality material to maintain alignment and withstand trail abuse. Whether you’re going for a competition setup or scale trail realism, this kit gives you the flexibility and reliability Vanquish is known for. Features: Six body post sizes for customizable body height and fitment Durable composite construction for long-lasting use Precision-engineered for perfect alignment and secure mounting Direct factory fit for the VS4-10 platform Genuine Vanquish Products quality Includes: (1) 90mm Body Post (1) 75mm Body Post (1) 60mm Body Post (1) 48mm Body Post (1) 30mm Body Post (1) 113mm One-Piece Body Post Compatibility: Vanquish Products VS4-10 Platform Vanquish Products — Precision Parts for Serious Crawlers.  

Read more less

Strengthen your chassis and reduce front-end tweak with the Vision Racing (VR) Carbon Chassis Standoff Brace Set. Designed for carbon fiber chassis platforms, this upgrade adds rigidity where it matters most while keeping weight low and looks clean. Featuring dual-mounting aluminum standoffs, this brace helps stabilize the front section of the chassis under load, improving consistency and feel—especially on high-grip tracks and during hard landings. Features & Benefits: Reduces front-end chassis tweak Adds rigidity to carbon fiber chassis Dual-mount aluminum standoffs for strength and stability Lightweight, race-focused design Clean, stylish finish that complements carbon chassis builds Compatibility: Team Associated B7 Team Associated B7D Team Associated T7 Team Associated SC7 Includes: Carbon chassis standoff brace set with aluminum standoffs A solid first impression from Vision Racing—functional, clean, and built for racers looking to tighten up their chassis performance.  

Read more less

Fine-tune rear suspension performance with the Vision Racing (VR) -2mm Carbon Rear Shock Tower V2 for the TLR 22X. Precision-cut from 4mm carbon fiber, this tower lowers the rear shock mounting position by 2mm to help dial in handling and consistency—without sacrificing strength. Designed to accept stock tower guards, the V2 adds micro-tune shock positioning for precise setup changes. Extra webbing has been integrated for increased rigidity, and all edges feature a clean chamfer for durability and a premium finish. Features & Benefits: -2mm rear shock height for refined suspension geometry 4mm carbon fiber construction for strength and stiffness Accepts stock rear tower guards Micro-tune shock positioning options Added webbing for extra strength Chamfered edges for durability and a clean look Compatibility: TLR 22X Includes: (1) Vision Racing TLR 22X -2mm Carbon Rear Shock Tower V2 (4mm) A focused performance upgrade for racers looking to tighten up rear-end feel with precision and confidence.  

Read more less

Improve suspension consistency and eliminate unwanted bind with the Vision Racing (VR) Carbon Front Pivot Brace for the TLR 22X and 22X-T. This precision-cut 2mm carbon fiber brace replaces the stock aluminum unit, which can flex or bend under hard impacts and aggressive racing conditions. By maintaining proper hinge pin alignment, this brace helps keep the front suspension moving freely and consistently, resulting in better handling, improved durability, and more predictable performance on track. Features & Benefits: 2mm carbon fiber construction for strength and rigidity Helps eliminate suspension binding caused by bent stock aluminum braces Maintains proper front hinge pin alignment Lightweight, race-focused design Improves consistency and front-end feel under hard use Compatibility: TLR 22X TLR 22X-T Includes: (1) Vision Racing Carbon Front Pivot Brace A smart performance upgrade for racers looking to tighten up front suspension action and maintain precise geometry throughout a race.        

Read more less

Upgrade strength and precision at the shock tower with the Vision Racing (VR) Titanium Upper Shock Mounts for the TLR 22X and 22X-T platforms. Designed to handle the demands of competitive racing, these mounts improve durability while keeping weight to a minimum. Machined from Grade 5 Ti-6Al-4V titanium, these standoffs offer exceptional strength, corrosion resistance, and long-term reliability. Integrated Delrin bushings help reduce wear and promote smooth shock movement for consistent suspension performance. Features & Benefits: Precision-machined Grade 5 Ti-6Al-4V titanium Lightweight with exceptional strength and durability Integrated Delrin bushings for smooth operation and reduced wear Improves shock mounting reliability under hard use Clean, race-focused design Compatibility: TLR 22X TLR 22X-T 1/10 scale platforms Includes: (2) Titanium upper shock mount standoffs Delrin bushings A premium hardware upgrade for racers looking to increase durability and consistency without adding unnecessary weight.      

Read more less

Vehicle: XBility Nova GT The XBility Nova GT Bumper Weights Set is a precision tuning option designed to fine-tune front weight bias and steering response on the Nova GT platform. These optional weights install directly into the Nova GT bumper and allow racers to make small, meaningful balance adjustments without changing suspension geometry. Available in 1g or 2g, these weights are ideal for dialing in steering feel, improving front bite, and adapting to changing track conditions. ⚙️ Features Optional front bumper tuning weights for Nova GT Available in 1g or 2g configurations Allows precise front weight bias adjustment Improves steering feel and front traction Ideal for fine tuning across different track conditions Compatible with all XBility Nova GT bumpers 📦 Includes (2) Nova GT Bumper Weights(Weight option selected at purchase: 1g or 2g)  

Read more less

The XBility Nova GT Lexan Body is a lightweight, clear body shell designed specifically for the XBility XBOne / Nova GT platform. Perfect for racers and builders who want full creative control, this clear Lexan body allows you to create custom paint schemes while maintaining excellent durability and aerodynamic performance. Precision molded for an exact fit, the Nova GT body protects key components without adding unnecessary weight—making it a great choice for both competition and casual running. 🎨 Customization Ready Clear Lexan construction for custom paint designs Easy to trim, paint, and mount Ideal for racers who want a unique look on track 🏁 Performance & Fit Lightweight Lexan material for improved performance Precision molded for the XBOne chassis Maintains aerodynamic efficiency Protects internal electronics and components ✅ Features Clear Lexan body for custom paint jobs Durable and crack-resistant material Exact-fit design for XBOne / Nova GT Clean, race-inspired body profile 📦 Includes (1) XBility Nova GT / XBOne Lexan Body (Clear)

Read more less