Traxxas 3x18mm Round-Head Machine Screws (6) – Part 2565Reliable Hardware. Precision Fit. The Traxxas 3x18mm round-head machine screws are perfect for replacing lost hardware or stocking your pit box. Built for a secure fit and clean finish, these screws are ideal for a wide range of RC assembly applications. ✅ Includes 6 round-head machine screws✅ Size: 3x18mm✅ Standard thread – compatible with most 1/10 Traxxas builds✅ Ideal for suspension, body, and chassis components✅ OEM quality for reliable performance 📦 Includes: (6) 3x18mm Round-Head Machine Screws Part #: 2565 💡 Pro Tip: Always keep a few spare hardware packs on hand for quick repairs and build adjustments.  

Read more less

Secure your components with confidence using Traxxas 3x20mm Countersunk Machine Screws. Featuring hex drive heads and a flush-fit countersunk design, these screws are perfect for applications where a smooth surface is essential. Features:• 3x20mm steel machine screws• Countersunk heads for flush mounting• Hex drive for reliable installation• Ideal for chassis, suspension, and flat-surface mounting• Genuine Traxxas hardware Includes:• (6) 3x20mm Countersunk Machine ScrewsPart Number: 2590 Perfect fit, strong hold—upgrade or replace with genuine Traxxas quality.      

Read more less

Traxxas 3x25mm Round-Head Machine Screws (6) – Part 2569Long Reach. Rock-Solid Hold. The Traxxas 3x25mm round-head machine screws are ideal for applications that require extra length without sacrificing strength or fit. Perfect for securing larger components or layering through thicker mounts. ✅ Includes 6 round-head machine screws✅ Size: 3x25mm – longer length for deeper mounting points✅ Durable steel construction – built to last under stress✅ Compatible with standard 3mm thread applications✅ Fits many Traxxas 1/10 scale models 📦 Includes: (6) 3x25mm Round-Head Machine Screws Part #: 2569 💡 Pro Tip: Match with washers or spacers to create rock-solid mounting solutions for electronics, bumpers, and more.    

Read more less

🔩 Strong, reliable fasteners for your Traxxas builds. This pack of Traxxas 3x30mm Button Head Machine Screws is perfect for repairs, upgrades, or custom builds. Made from durable steel and precision-threaded, they’re compatible with a wide range of Traxxas models, including the Revo. ✅ Durable steel construction✅ Precision M3 threading✅ Button head design for a smooth finish✅ Fits many Traxxas vehicles, including the Revo 📦 Includes:• (6) 3x30mm Button Head Machine Screws    

Read more less

Traxxas 3x8mm Button Head Machine Screws (6) – Part #2576🔩 Essential Hardware. Universal Fit. Keep your rig dialed with this 6-pack of Traxxas 3x8mm Button Head Screws. Designed for a clean, low-profile finish and built to handle tough conditions, these machine screws are perfect for a wide range of RC applications—including the Traxxas Revo and beyond. ✅ Button head design for a sleek and secure hold✅ Machine thread for metal or tapped plastic✅ Universal fit across many Traxxas vehicles✅ A great go-to screw for any pit box 📦 Includes: (6) 3x8mm Button Head Machine Screws 

Read more less

Traxxas 3x8mm Flat Head Screw (6) (VXL) – Part #3931🔩 Secure Fit. Clean Finish. The Traxxas 3x8mm Flat Head Screws are precision-machined for a flush, low-profile installation. Ideal for use in VXL and other Traxxas vehicles, these flat head screws ensure a snug, countersunk fit for components where a smooth finish is essential. ✅ Perfect for flush-mount applications✅ 3x8mm metric sizing✅ Flat head design for clean installation✅ Genuine Traxxas quality✅ Great for chassis, body panels, and more 📦 Includes: (6) 3x8mm Flat Head Screws 💡 Pro Tip: Always check your manual for proper screw placement and thread-lock recommendations for metal-on-metal applications.  

Read more less

Traxxas 3x8mm Washer-Head Machine Screws (6) – Part 3185Built-In Grip. Extra Hold. Compact Size. The Traxxas 3x8mm washer-head machine screws provide a wider contact surface for more secure fastening — without needing a separate washer. Ideal for mounting components where extra grip is needed in a tight space. ✅ Includes 6 washer-head machine screws✅ Size: 3x8mm – compact length for low-clearance installs✅ Washer-style head – spreads load, prevents pull-through✅ Standard 3mm thread – compatible with most Traxxas builds✅ Perfect for mounting electronics, linkages, and body parts 📦 Includes: (6) 3x8mm Washer-Head Machine Screws Part #: 3185 💡 Pro Tip: Great for plastic parts where larger heads reduce the risk of cracking or stripping.  

Read more less

  Bulkhead Overview:This is a replacement front bulkhead designed for the Traxxas 4-Tec 2.0 platform. It restores structural support to the front end and ensures proper alignment of suspension and drivetrain components. 🔧 Key Features Replacement front bulkhead Maintains chassis integrity and alignment Direct fit Traxxas part 📦 Includes (1) Front Bulkhead 🚗 Compatibility Traxxas 4-Tec 2.0 Ideal for replacing worn or damaged components, this bulkhead helps keep your 4-Tec 2.0 running straight and performing as intended.

Read more less

  This is a pack of four replacement Traxxas 4-Tec 2.0 Shock Caps. These caps feature installed eyelets. COMPATIBILITY: Traxxas 4-Tec 2.0 Traxxas Hoss Traxxas Rustler 4x4

Read more less

Traxxas 400 High Torque Waterproof Brushless Servo – Red (High Voltage)Part #: 2255 Unleash Extreme Steering Power.The Traxxas 2255 High-Torque Brushless Servo delivers serious steering authority for high-demand 1/10 scale RC vehicles. With a whopping 400 oz-in of torque, lightning-fast response, and a waterproof design, this servo is built to take your vehicle’s performance to the next level—whether bashing, racing, or crawling. It features a full metal gear train, dual ball bearings, a high-efficiency brushless motor, and an anodized aluminum center case that sheds heat and adds strength. Whether you're piloting a Slash, Stampede, UDR, or upgrading your dual-servo E-Revo, the 2255 drops in for an immediate power boost. Built for the Toughest Terrain:Waterproof—not just water-resistant—this servo is ready for mud, snow, rain, or stream crossings without skipping a beat. TRX-4 Ready:For TRX-4 models, install with the Traxxas High-Voltage BEC Kit (#2262) and use the steel servo horn (#8247X) for optimal performance and protection. Highlights: 400 oz-in torque at 6.0V 0.15 sec/60° transit speed Waterproof sealed case Full metal gears and dual ball bearings Powerful brushless motor Aluminum center case dissipates heat Compatible with TSM™ and most 1/10 scale Traxxas vehicles Ideal single-servo upgrade for E-Revo Direct replacement for models using standard 2075 servos Specifications: Motor: Brushless Voltage Range: 6.0 – 7.4V DC Torque (6.0V): 400 oz-in Speed (6.0V): 0.15 sec/60° Weight: 64g Spline: 25T Gears: Metal Case: Plastic top/bottom, anodized aluminum center Controller: Digital Drop in the 2255 and take full control. Whether trail crawling or blasting around the track, this servo delivers the brute force and precision you need to lead the pack.

Read more less

Traxxas 47mm Front Camber Link Turnbuckles (2) – Part 2444Tighten Up Your Front-End Geometry. The Traxxas 47mm Front Camber Link Turnbuckle Set is a direct replacement for the front camber links on the Traxxas Bandit. These adjustable steel turnbuckles allow you to fine-tune your camber for better cornering, tire contact, and front-end responsiveness. ✅ Designed specifically for the Traxxas Bandit (front suspension)✅ Includes two 47mm steel turnbuckles✅ Smooth-threaded for precise alignment changes✅ Heavy-duty steel construction – reliable and durable✅ Adjustable with a turnbuckle wrench (sold separately) 📦 Includes: (2) 47mm Front Camber Link Turnbuckles Part #: 2444 💡 Pro Tip: Combine with the 36mm rear turnbuckles (Part 2443) for full camber control front and rear.

Read more less

Traxxas 48P Pinion Gear (28T) – Part #4728⚙️ Precision Gearing. Balanced Performance. Dial in your drivetrain with the Traxxas 28-tooth 48-pitch pinion gear. Perfect for fine-tuning your RC’s performance, this hardened steel gear delivers smooth acceleration and balanced top-end speed when paired with an 83T spur gear. Whether you're racing or bashing, proper gearing can mean the difference between finishing strong or falling short. ✅ 48-pitch, 28-tooth steel pinion✅ Ideal for increasing speed while maintaining efficiency✅ Compatible with standard 3mm motor shafts✅ Perfect match with 83T spur gear for optimized gearing✅ Set screw included for secure installation 📦 Includes: (1) 28T 48P Pinion Gear (1) Set Screw 💡 Pro Tip: Want more torque and acceleration? Go with a smaller pinion. Want more top speed? Gear up with a larger pinion—just like this one!  

Read more less

Traxxas 48P Spur Gear (76T)Part #: 4676 This 76-tooth, 48-pitch spur gear is a direct replacement from Traxxas, ideal for dialing in your gearing for optimal performance. Whether you're fine-tuning for acceleration or speed, this gear provides smooth, reliable power transfer. Features: Genuine Traxxas replacement part 48-pitch, 76-tooth gear Perfect for customizing gear ratios Durable molded construction Includes: (1) 76T 48P Spur Gear Note: Ensure pitch compatibility with your pinion gear before installation.  

Read more less

Traxxas 48P Spur Gear (86T)Part #: 4686 Fine-tune your gearing with this optional 48-pitch, 86-tooth spur gear from Traxxas. Whether you're looking to optimize for more torque or higher top-end speed, this precision-molded gear delivers consistent performance and smooth power delivery. Features: Optional 48-pitch 86-tooth spur gear Ideal for adjusting gear ratios for better torque or speed Durable molded construction Genuine Traxxas quality and reliability Includes: (1) 86T 48P Spur Gear Note: Be sure to verify pitch compatibility with your pinion gear before installing.

Read more less

Traxxas 4mm Aluminum Flanged Serrated Locknuts (4-Pack) Part #: 1747G / 1747R / 1747T / 1747A / 1747PAvailable Colors: Green, Red, Blue, Black, Purple Add both function and flair to your RC build with Traxxas Aluminum 4mm Flanged Locknuts! These serrated, anodized locknuts offer a lightweight, high-strength upgrade that resists loosening from vibration—perfect for racers and bashers alike. 📦 Includes: (4) 4mm Aluminum Flanged Serrated Locknuts (choose color) ✅ Features: CNC-machined from lightweight 6061-T6 aluminum Anodized finish for brilliant color and corrosion resistance Serrated flange helps grip plastic or metal surfaces securely Adds a high-performance, custom look to your RC rig Fits standard 4mm threaded axles and components Compatible with most Traxxas 1/10 scale vehicles 🎨 Dress up your build and lock in performance—available in multiple colors to match your style!

Read more less

Traxxas 4mm Locknuts (10-Pack) Part #: 1747 | Secure Fit for Your RC Wheels & Components The Traxxas 1747 4mm Locknuts are designed to keep your wheels and components securely in place under extreme RC conditions. Built for strength and vibration resistance, these locknuts are a must-have for racers and bashers alike. 📦 Includes: (10) 4mm Locknuts ✅ Features: Nylon-insert locknut design resists loosening from vibration Standard 4mm thread size for broad compatibility Ideal for wheel nuts, suspension arms, and more Fits a wide range of Traxxas vehicles Durable metal construction

Read more less

Bumper Overview:This is a replacement rear bumper set with mount designed for the Traxxas Slash 4x4 platform. It helps protect the rear of the vehicle while maintaining a secure mounting setup. 🔧 Key Features ✔ Replacement rear bumper set✔ Includes mounting hardware✔ Helps protect rear components✔ Durable construction✔ Direct fit design 📦 Includes (1) Rear Bumper (1) Mount 🚗 Compatibility Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Ideal for replacing worn or damaged components, this bumper set helps keep your truck protected and ready for action.

Read more less

Small parts. Big strength.These Traxxas 4x10mm Button Head Machine Screws are precision-made for strength, fit, and durability. Perfect for maintenance, repairs, or custom builds, they’re designed to fit a wide range of Traxxas vehicles — including the legendary Revo® — and countless other RC applications. Built for ReliabilityCrafted from high-quality steel, these screws feature a smooth button head for a clean, finished look and a secure hold. Ideal for chassis assembly, suspension components, and accessories where strength and style matter. 💪 Features: Genuine Traxxas hardware for perfect fit and finish Strong steel construction for long-lasting use Button head design for smooth, low-profile appearance Ideal for a variety of RC maintenance and upgrade applications 📦 Includes: (6) 4x10mm Button Head Machine Screws ✅ Compatibility: Fits Traxxas Revo® and most other Traxxas models Universal fit for general RC applications    

Read more less

Traxxas 4x15mm Countersunk Screws (6)Part #: 3167 Don’t let the small stuff slow you down! These Traxxas 4x15mm Countersunk Screws are a must-have for your toolbox. Designed to sit flush and secure, they’re perfect for keeping your rig dialed in and clean. Whether you're replacing worn hardware or building something new, this 6-pack has your back. Includes: (6) 4x15mm Countersunk Screws Built for durability. Backed by Traxxas. Ready for action.  

Read more less

🔧⚙️ Keep Your Drivetrain Performing at Its Best The Traxxas 4x4 Heavy Duty Slipper Clutch Rebuild Kit is a genuine replacement kit designed to restore the performance of your Traxxas slipper clutch assembly. Whether you're performing routine maintenance or replacing worn clutch components after countless runs, this rebuild kit helps maintain smooth power transfer and protects your drivetrain from sudden shock loads. Built to Traxxas factory specifications, it provides the fit and reliability you expect from genuine replacement parts. 🏁 About the Slipper Clutch Rebuild Kit ⚙️ Restore Smooth Clutch Operation Replace worn slipper clutch components to keep your drivetrain operating smoothly and consistently under acceleration. 💪 Genuine Traxxas Replacement Manufactured for an exact fit on compatible Traxxas 1/10 4WD vehicles, ensuring dependable performance and easy installation. 🔧 Routine Maintenance Made Easy An excellent replacement kit for servicing a worn or slipping clutch assembly and keeping your vehicle ready for the next bash. 🔧 Features ✔ Genuine Traxxas replacement part✔ Restores slipper clutch performance✔ Helps maintain smooth power delivery✔ Protects drivetrain components from shock loads✔ Direct-fit replacement for compatible Traxxas 4WD models✔ Ideal for routine maintenance and repairs 📦 Includes (1) Traxxas Slipper Clutch Rebuild Kit 🚗 Compatibility Compatible with many Traxxas 1/10 4WD vehicles, including: Traxxas Slash® 4X4 Traxxas Rustler® 4X4 Traxxas Stampede® 4X4 ⚠️ Notes Genuine Traxxas replacement part. Designed for compatible Traxxas 1/10 4WD slipper clutch assemblies. Verify compatibility with your specific vehicle before installation.

Read more less

  🔧⚙️ Restore Smooth, Consistent Slipper Clutch Performance The Traxxas 4x4 Heavy-Duty Slipper Clutch Rebuild Kit is a genuine replacement kit designed to restore the performance of your Traxxas 1/10 4WD drivetrain. Whether your slipper clutch has worn from countless launches or hard bashing sessions, this rebuild kit provides the components needed to bring it back to proper operation. Designed specifically for Traxxas 4x4 platforms, it's an easy way to maintain consistent power delivery and drivetrain protection. 🏁 About the Heavy-Duty Slipper Clutch Rebuild Kit ⚙️ Restore Factory Performance Replace worn slipper clutch components to help maintain smooth engagement and protect your drivetrain from excessive shock loads. 💪 Genuine Traxxas Quality Manufactured to Traxxas specifications for proper fit, dependable durability, and reliable performance. 🔧 Simple Maintenance Ideal for routine maintenance or repairing a worn slipper clutch after extended use. 🔧 Features ✔ Genuine Traxxas replacement part✔ Restores slipper clutch performance✔ Heavy-duty replacement components✔ Helps maintain smooth power transfer✔ Protects drivetrain components from shock loads✔ Direct-fit replacement for compatible Traxxas 4WD models 📦 Includes (1) Traxxas Heavy-Duty Slipper Clutch Rebuild Kit 🚗 Compatibility Compatible with many Traxxas 1/10 4WD vehicles, including: Traxxas Slash® 4X4 Traxxas Rustler® 4X4 Traxxas Stampede® 4X4 ⚠️ Notes Genuine Traxxas replacement part. Designed for compatible Traxxas 1/10 4WD platforms equipped with the heavy-duty slipper clutch. Verify compatibility with your specific vehicle before installation.

Read more less

Traxxas 54T Spur Gear – 0.8 Mod / 32-Pitch – Part 3956RSmooth Power Transfer. Built for Brushless. The Traxxas 54-Tooth Spur Gear (3956R) is a direct replacement part for high-performance 1/10 scale models using a 0.8 Mod / 32-pitch gear setup. Ideal for brushless power systems, this gear delivers strong, consistent power transfer while holding up to heavy torque. ✅ Tooth Count: 54T – perfect for torque-balanced gearing setups✅ Pitch: 32P / 0.8 Mod – tough and compatible with brushless motors✅ Durable molded construction – long-lasting under load✅ OEM direct fit for Traxxas models using 32P spur gears✅ Compatible with slipper clutch systems 📦 Includes: (1) 54-Tooth Spur Gear (32P / 0.8 Mod) Part #: 3956R 💡 Pro Tip: Pair with the correct pinion gear to dial in your ideal torque vs. speed ratio for your terrain and driving style.  

Read more less

Traxxas 54T Spur Gear – 0.8 Mod Metric Pitch – Part 3956Factory Fit. Smooth Mesh. Built to Perform. The Traxxas 54-Tooth Spur Gear (3956) is a direct replacement part designed to mount on the transmission input shaft, meshing with your pinion gear to deliver reliable, consistent power transfer in demanding driving conditions. ✅ 54-tooth gear – standard gearing for balanced speed and torque✅ 0.8 Metric Pitch – matches with Mod 0.8 / 32-pitch pinion gears✅ Durable molded construction – designed for long-lasting performance✅ Fits Traxxas vehicles using 0.8MP spur setups✅ Mounts to input shaft, meshes with clutch bell pinion 📦 Includes: (1) 54T Spur Gear (0.8 Metric Pitch) Part #: 3956 💡 Pro Tip: Use threadlock when re-installing your spur gear screws to prevent backing out under vibration.

Read more less

Toe Link Overview:This is a replacement set of 59mm toe link turnbuckles designed for select Traxxas 2WD platforms. Pre-assembled with rod ends and pillow balls, they allow for easy installation and precise rear toe adjustments. 🔧 Key Features ✔ 59mm toe link turnbuckles✔ Pre-assembled with rod ends and pillow balls✔ Allows precise toe adjustment✔ Maintains proper suspension alignment✔ Direct fit replacement 📦 Includes (2) Toe Link Turnbuckles 🚗 Compatibility Traxxas Drag Slash Traxxas Nitro Slash Traxxas Rustler 2WD Traxxas Slash 2WD Ideal for replacing worn or bent links, these turnbuckles help keep your rear suspension aligned and performing consistently.  

Read more less

Traxxas 5x11x4mm Ball Bearings (2) – Part 5116Smooth Operation. Built to Last. The Traxxas 5x11x4mm Ball Bearings are a direct replacement for worn-out or damaged bearings in a variety of Traxxas vehicles. Designed for low-friction rotation and long-lasting performance, these bearings are perfect for keeping your drivetrain, hubs, or transmission running like new. ✅ Includes 2 ball bearings✅ Size: 5x11x4mm – fits many Traxxas applications✅ Precision construction – reduces rolling resistance and wear✅ Great for wheels, transmissions, and steering systems✅ OEM replacement quality – trusted fit and durability 📦 Includes: (2) 5x11x4mm Ball Bearings Part #: 5116 💡 Pro Tip: Replace bearings in pairs for balanced performance and reduced vibration.

Read more less

Traxxas 5x8x0.5mm Teflon Washers (20) Part #: 1985 Ensure smoother performance and reduced friction with Traxxas PTFE-Coated Teflon Washers. These 5x8x0.5mm washers are designed to be used with ball bearings, helping to extend bearing life and improve overall drivetrain efficiency. ✅ Features: PTFE (Teflon) coating for low friction and long wear Ideal for use with 5x8mm ball bearings Helps reduce heat and drag in rotating components Precision-manufactured for consistent fit and function 📦 Includes: (20) 5x8x0.5mm PTFE-Coated Teflon Washers 🛠️ Perfect for racers and bashers alike — upgrade your RC performance with these ultra-low friction washers from Traxxas!

Read more less

Bushing Overview:This is a replacement set of plastic bellcrank bushings designed for select Traxxas vehicles. They help support smooth steering movement and reduce wear in the bellcrank assembly. 🔧 Key Features ✔ 5x8x2.5mm plastic bushings✔ Designed for bellcrank assemblies✔ Helps maintain smooth steering operation✔ Reduces wear on components✔ Direct replacement 📦 Includes (4) Bellcrank Bushings 🚗 Compatibility Fits various Traxxas models (including Revo and other platforms using 5x8x2.5mm bushings) Ideal for replacing worn bushings, this set helps keep your steering system operating smoothly and reliably.    

Read more less

Keep your Traxxas vehicle running smooth with this pack of 6x12x4mm ball bearings. Designed as a direct replacement, these bearings reduce friction, improve efficiency, and help extend the life of your drivetrain. ✅ Direct Replacement – OEM Traxxas quality and fit✅ Smooth Performance – Reduces friction for improved speed and efficiency✅ Durable Design – Built to handle the demands of RC bashing and racing Includes: (2) Traxxas 6x12x4mm Ball Bearings Part Number: 5117 Simple, effective, and essential — the Traxxas 5117 Ball Bearings are a must-have for keeping your RC vehicle running at peak performance.

Read more less

The Traxxas 5117A Ball Bearings are a direct replacement set designed to keep your vehicle running smooth and efficient. These high-quality bearings reduce friction, improve drivetrain performance, and extend component life. ✅ OEM Replacement – Perfect fit and finish for Traxxas vehicles✅ Improves Efficiency – Reduces rolling resistance for smoother operation✅ Durable & Reliable – Built to withstand the demands of RC use Includes: (2) Traxxas 6x12x4mm Ball Bearings Part Number: 5117A Keep your Traxxas vehicle race-ready with the 5117A Ball Bearings — simple, effective, and essential.

Read more less

Keep your RC running smooth and efficient with this pair of Traxxas 6x13x5mm Ball Bearings. Designed as direct replacements, these high-quality bearings reduce friction and improve performance wherever they’re used. 🛠️ Features: Genuine Traxxas replacement part Precision 6x13x5mm ball bearings Helps maintain smooth and reliable drivetrain operation Perfect for maintenance or upgrades Includes:(2) 6x13x5mm Ball Bearings A simple upgrade that makes a big difference in durability and speed—don’t hit the track without them!

Read more less

🔧 Essential Metric Tools for Traxxas Maintenance & Repairs The Traxxas 7-Piece Metric Hex & Nut Driver Essentials Set combines the most commonly used hex and nut driver sizes for maintaining Traxxas RC vehicles. Featuring precision-ground hardened-steel hex drivers, machined hardened-steel nut drivers, and a comfortable rubber over-molded handle, this compact kit provides the tools needed for everyday repairs, adjustments, and maintenance. Each bit uses a standard 1/4-inch hex shank for compatibility with the included magnetic handle or a compatible power driver. The included heavy-duty carrying pouch keeps everything organized and ready for the workbench, track, or field. 🔧 Precision Hex & Nut Drivers The set includes three commonly used metric hex drivers and four metric nut drivers. Precision-machined tips provide a secure fit with compatible hardware, helping reduce slipping, rounded screws, and damaged fasteners. ✋ Comfortable Magnetic Handle The rubber over-molded driver handle provides a comfortable, secure grip with plenty of leverage for stubborn hardware. A powerful magnetic insert securely holds each bit while allowing quick changes between sizes. ⚡ Power Driver Compatible Every driver features a standard 1/4-inch hex shank, allowing the bits to be used with the included hand driver or compatible drill/drivers for faster maintenance and disassembly. 🔧 Features Seven essential metric hex and nut driver sizes Precision-ground hardened-steel hex drivers Machined hardened-steel nut drivers Rubber over-molded handle for improved comfort and grip Magnetic bit retention for fast driver changes Standard 1/4-inch hex shanks Compatible with power drill/drivers Laser-etched sizes for easy identification Heavy-duty carrying pouch included Custom embroidered Traxxas logo Ideal for workbench and trackside maintenance 📦 Includes Straight Hex Drivers: (1) 1.5mm Hex Driver (1) 2.0mm Hex Driver (1) 2.5mm Hex Driver Nut Drivers: (1) 5.0mm Nut Driver (1) 5.5mm Nut Driver (1) 7.0mm Nut Driver (1) 8.0mm Nut Driver Also Includes: (1) Rubber Over-Molded Magnetic Driver Handle (1) Heavy-Duty Traxxas Carrying Pouch 📊 Specifications Specification Details Part Number 8712 Product Type Metric Hex & Nut Driver Essentials Set Hex Driver Sizes 1.5mm, 2.0mm, 2.5mm Nut Driver Sizes 5.0mm, 5.5mm, 7.0mm, 8.0mm Number of Driver Bits 7 Bit Material Hardened Steel Shank Size 1/4in Hex Handle Rubber Over-Molded Bit Retention Magnetic Carrying Case Included 🚗 Application Designed for building, repairing, and maintaining Traxxas RC vehicles using compatible metric hex and nut hardware. ⚠️ Notes Driver sizes are clearly laser etched for quick identification. The 1/4-inch hex shanks can be used with compatible power drivers. Use care when using power tools on small RC hardware to avoid overtightening or stripping fasteners.  

Read more less

🔧 Premium Traxxas Tool Set for Building, Maintenance & Trackside Repairs The Traxxas 7-Piece Metric Hex Bit Master Set is a premium tool kit designed to make building, maintenance, and repairs easier on Traxxas RC vehicles. Featuring precision-ground hardened-steel tips, a comfortable rubber over-molded handle, and standard 1/4-inch hex shanks, this set provides the fit and control needed to help prevent stripped screws and rounded hardware. Everything stores neatly inside the included heavy-duty carrying pouch, making this set equally useful at the workbench, track, or bash spot. 🔧 Precision-Ground Hex Bits Each speed bit features a precision-ground, hardened-steel tip engineered for an accurate fit in metric hex hardware. The precise fit helps reduce slipping, premature tool wear, and damage to screw heads during maintenance. ✋ Comfortable Magnetic Handle The included driver handle features an ergonomic rubber over-molded grip for added comfort and leverage. A powerful magnetic insert securely holds the selected bit while allowing fast bit changes when moving between different hardware sizes. ⚡ Power Driver Compatible The bits feature a standard 1/4-inch hex shank, allowing them to be used with the included hand driver or compatible power drill/drivers for faster wrenching. 🔧 Features Precision-ground hardened-steel metric hex bits Designed specifically for servicing Traxxas models Rubber over-molded driver handle for comfort and grip Magnetic insert securely holds bits in the handle Standard 1/4-inch hex shanks Compatible with power drill/drivers Laser-etched sizing for quick identification Heavy-duty carrying pouch for storage and transportation Custom embroidered Traxxas logo Compact design ideal for trackside and field use 📦 Includes (1) Rubber Over-Molded Magnetic Driver Handle Metric Hex Speed Bits (1) Heavy-Duty Traxxas Carrying Pouch Hex sizes include: 1.5mm 2.0mm 2.5mm 3.0mm 📊 Specifications Specification Details Part Number 8711 Product Type Metric Hex Bit Master Set Hex Sizes 1.5mm, 2.0mm, 2.5mm & 3.0mm Bit Material Hardened Steel Shank Size Standard 1/4in Hex Handle Rubber Over-Molded Bit Retention Magnetic Carrying Case Included 🚗 Application Ideal for building, repairing, and maintaining Traxxas RC cars, trucks, and other models using compatible metric hex hardware. ⚠️ Notes The manufacturer's description identifies this as a 7-piece set, but the supplied information only specifically identifies the four hex sizes, handle, and carrying pouch.

Read more less

  Traxxas 83T Spur Gear – 48 Pitch – Part 4683Dial In the Perfect Gear Ratio. Built for Smooth Torque Control. The Traxxas 83-Tooth Spur Gear (Part 4683) is a high-precision replacement gear designed for models equipped with a Torque-Control slipper clutch. With fine 48-pitch teeth, it's perfect for smooth throttle response and gear ratio tuning in 1/10 scale vehicles. ✅ Tooth Count: 83T – ideal for high-acceleration gearing setups✅ Pitch: 48P – fine-tooth mesh for smooth and quiet operation✅ Designed for Torque-Control slipper clutch systems✅ Durable molded construction – reliable under brushless power✅ Fits a wide range of Traxxas 1/10 scale models 📦 Includes: (1) 83-Tooth 48P Spur Gear Part #: 4683 💡 Pro Tip: Pair with different 48P pinion sizes to fine-tune your speed vs. torque for your track or terrain.  

Read more less

Traxxas 90T Spur Gear – 48 Pitch – Part 4690Optional Gearing. Maximum Torque. Smooth Power Delivery. The Traxxas 90-Tooth Spur Gear (Part 4690) is a high-tooth-count option for drivers looking to increase low-end torque and improve throttle control. Designed for 1/10 scale Traxxas vehicles using 48-pitch gears, this spur is perfect for tight tracks, crawling setups, or slower-speed applications where control matters most. ✅ Tooth Count: 90T – increases torque and low-end response✅ Pitch: 48P – fine-pitch for smooth and quiet operation✅ Optional upgrade for fine-tuning gear ratio✅ Durable molded construction – built to handle real-world use✅ Fits a wide range of Traxxas 1/10 scale models 📦 Includes: (1) 90-Tooth 48P Spur Gear Part #: 4690  

Read more less

Upgrade your Traxxas with style and strength! The Traxxas Aluminum 30° Caster Blocks deliver precision steering, improved durability, and bold anodized colors that make your vehicle stand out on and off the track. CNC-machined from billet 6061-T6 aluminum and laser-etched with the TRX® logo, these caster blocks are built to perform and made to last. Features: Machined from high-strength 6061-T6 aluminum Precision-fit design improves steering performance and control Available in multiple anodized colors — Blue, Green, Pink, Orange, or Red Laser-etched TRX® logo for a premium look Direct bolt-on installation — no modifications needed Includes hardware and ready for easy installation Includes: (1) Left Front 30° Aluminum Caster Block (1) Right Front 30° Aluminum Caster Block (2) Suspension Screw Pins Compatibility: Traxxas Drag Slash Traxxas Nitro Slash Traxxas Rustler 2WD Traxxas Slash 2WD Traxxas Stampede 2WD

Read more less

Upgrade strength, durability, and style with the Traxxas Aluminum Bulkhead Front & Rear Tie Bar Set. Designed as a direct replacement for the stock components, these aluminum tie bars add rigidity to the chassis while reducing flex under hard acceleration, landings, and aggressive driving. Machined from high-quality aluminum and anodized in multiple color options, this set not only improves performance but also adds a clean, factory-upgrade look to your Traxxas 4x4 platform. Features Precision-machined aluminum construction Increased chassis rigidity and durability Reduces flex under high loads and impacts Factory-fit replacement for easy installation Available in multiple anodized colors for custom styling Compatibility Traxxas Hoss Traxxas Rally Traxxas Rustler 4x4 Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Stampede 4x4 Traxxas Telluride 4x4 Includes (1) Front Aluminum Bulkhead Tie Bar (1) Rear Aluminum Bulkhead Tie Bar

Read more less